Saves money.
`Saves time.
`Saves lives.
`
`The ingenious Swivelpole™ Retrofi t System (See p.19)
`
`Convert to Swivelpole™
`and reduce your ongoing
`lighting maintenance costs
`by an average of 95%.
`
`1
`
`
`
`CAD drawings available online: swivelpole.com
`
`H IGH-SAFETY LUMI NAI RE SUPPORT SYSTEM
`
`PRODUCT CATALOGUE
`
`Petitioner Ensign
`Exhibit 1004 - 1 of 28
`
`

`

`Saves money. Saves time. Saves lives.
`
`Poor lighting is one of the major causes of industrial accidents. But because simply changing a light
`bulb is a very labour-intensive and dangerous job, areas are often left dark.
`
`Swivelpole™ solves all your lighting maintenance and upgrade problems in one smart move. It's unique,
`globally patented swivel mechanism lets you lower – and rotate – a light fi tting to a safe working level in
`minutes. No ladders, no scaff olding, and no fall arrest systems.
`
`Swivelpole™ can be built-in to new facilities, or easily retrofi tted without welding so there’s no need for
`hot work permits. And once fi tted, you can change – or upgrade – to new lighting technology.
`To operate, all you need is a socket wrench.
`
`
`
`Swivelpole™ lets you safely change a faulty
`light bulb in minutes, not hours.
`
`Once installed, Swivelpole™ saves time and money, year after year.
`
`The Swivelpole™ luminaire support system delivers cost savings throughout a project’s lifecycle from
`specifi cation to ongoing inspection and maintenance.
`
`SPECIFICATION
`DETERMINATION
`
`INSTALLATION
`TERMINATION
`
`INSPECTION
`MAINTENANCE
`
`INTUITIVE PRODUCT DATA & CODING
`✔ REDUCES DESIGN & PROCUREMENT COST
`
`QUICK & SIMPLE INSTALLATION
`✔ REDUCES INSTALLATION COST
`
`LESS ADMINISTRATION AND PERMITS
`✔ REDUCES ADMINISTRATION COST
`
`MOUNTING SOLUTIONS FOR ALL APPLICATIONS
`
`✔ REDUCES DESIGN COST WITH
`PROPRIETARY FITTINGS
`
`ENGINEERED DRAWINGS READY
`TO SPECIFY
`✔ REDUCES ENGINEERING COST
`
`
`
`NO WELDING OR PAINTING REQUIRED
`✔ REDUCES LABOUR COST
`
`NO NEED FOR ACCESS EQUIPMENT RENTAL
`✔ REDUCES EQUIPMENT COST
`
`NO HOT WORK PERMIT REQUIRED
`✔ REDUCES PERMIT COST
`
`EASY FITTING & TERMINATION OF
`ELECTRICAL EQUIPMENT
`✔ REDUCES INSTALLATION COST
`
`IMPROVES ONGOING MAINTENANCE TIMES
`✔ REDUCES OPERATING EXPENDITURE & LABOUR COST
`
`SUPPORTS HEALTH, SAFETY & ENVIRONMENT
`OBJECTIVES
`✔ REDUCES POTENTIAL INJURIES & DOWN TIME COSTS
`
`Petitioner Ensign
`Exhibit 1004 - 2 of 28
`
`

`

`VS
`
`Labour-intensive and dangerous traditional maintenance
`
`Safe and effi cient Swivelpole™ maintenance solution
`
`Reduce your
`ongoing lighting
`maintenance
`costs by an
`average of
`95%
`
`Persons Required
`
`Fall Arrest Equipment
`
`Personal Gas Monitor *
`
`Hot Work Permit *
`
`Job Safety Analysis
`
`Total Access Time
`(per luminaire)
`
`SCAFFOLD
`
`E.W.P.
`
`LADDER
`
`30
`minutes
`
`16
`hours
`
`8
`hours
`
`5
`hours
`
`* Hazardous Areas
`
`Australian and Canadian industry surveys conducted 2009, 2011 and 2012
`
`SwivelpoleTM Product Catalogue
`
` 1
`
`Petitioner Ensign
`Exhibit 1004 - 3 of 28
`
`

`

`Innovative Swivel Mechanism
`
`The core of the Swivelpole™ system is
`its unique globally patented swivel
`mechanism
`
`Top section
`
`• Incorporates a “clutch plate” design reducing
`the weight transfered to the operator.
`
`• Allows one-person controlled lowering of the
`pole top section and luminaire.
`
`• Pole top rotates on its axis so the luminaire
`comes to an upright maintenance position
`when lowered.
`
`• Provides full mechanical protection of the
`cable within the Safe Swivel™ joint. Suitable
`for SWA (Steel Wire Armoured) cable.
`
`Base section
`
`Round
`swivel plate
`
`• Requires simple loosening of fasteners with no
`part to be removed for operation.
`
`• Incorporates a safety locking pin for securing
`the pole top to a range of maintenance
`positions.
`
`Base section
`swivel plate
`
`Safety pin
`
`Clamp plate
`
`Bolt
`
`Spring washer
`Flat washer
`
`Flange nut
`
`Multiple safety
`pin positions
`
`• Smooth safe
`edges protecting
`cable insulation.
`
`• Providing full
`mechanical
` protection of
` wire/cable.
`• Also suitable for
` SWA (Steel Wire
`Armoured)
`cable.
`
`• Suitable for hazardous and corrosive
`environments.
`
`• Structurally certifi ed product.
`
`Safe Swivel™ joint orientation
`and path of motion
`For the Swivelpole™ to operate at its
`optimum performance it must be
`assembled and installed correctly.
`
`Correct installation means the
`walkway is not obstructed and
`the Swivelpole™ clears adjacent
`infrastructure to the side of, or
`behind, the guardrail.
`
`To achieve the correct installation
`you must consider both the luminaire
`mounting confi guration and the
`orientation of the Safe Swivel™ joint in
`relation to the guardrail.
`
`The orientation of the Safe Swivel™
`joint determines the path that the
`luminaire will follow as it is being
`lowered to the maintenance position.
`
`Adjusting the orientation of the
`Safe Swivel™ joint in combination
`with the luminaire mount, allows
`fl exibility in avoiding clash and
`obtaining the desired maintenance
`position.
`
`2
`
`
`CAD drawings available online: swivelpole.com
`
`0°
`
`45°
`
`90°
`
`Large luminaires parallel to guardrail
`An orientation of 0° in relation to the guardrail
`avoids a potential clash with any infrastructure
`directly behind the Swivelpole™. This is the
`recommended orientation when luminaires are
`mounted parallel to the guardrail eg. LMK 2304.
`
`Small luminaires perpendicular to guardrail
`An orientation of 45° in relation to the guardrail
`(left or right) results in a maintenance position
`close to the guardrail with minimum obstruction
`to walkway. This is the recommended orientation
`when preventing clash with conveyors etc.
`
`Large luminaires perpendicular to guardrail
`An orientation of 90° in relation to the guardrail
`avoids clash with infrastructure to either the left
`or right side and behind the Swivelpole™. This is
`the recommended orientation when luminaires
`are mounted perpendicular to the guardrail
`eg. LMK 2301
`
`90°
`
`To avoid adjacent obstructions
`An orientation of 90° avoids clash with
`infrastructure to either the left or right side
`of the Swivelpole™. This is the recommended
`orientation for column or wall mounting.
`
`Petitioner Ensign
`Exhibit 1004 - 4 of 28
`
`

`

`Product Overview
`
`TECHNICAL SPECIFICATIONS
`
`STANDARD MATERIAL & FINISH
`
`Material:
`Finish:
`
`• Structural Steel
`• Hot-dip Galvanised (HG)
`
`OTHER MATERIALS & FINISHES
`
`• Stainless Steel (SS) grade 316
`• Aluminium (AL)
`
`Other commercially available fi nishes eg. powder coating can be
`supplied to suit specifi c applications and specifi cations.
`
`DIMENSIONS
`
`All dimensions are in imperial/metric (nominal) and may diff er from
`published tables. NPS stands for nominal pipe size.
`DN stands for nominal size. OD stands for outside diameter.
`
`
`
`MANUFACTURING STANDARDS
`
`Country:
`
`UNITED STATES
`
`CANADA
`
`Steel:
`
`ASTM A36
`
`Welding:
`
`AWS D1.1
`
`Galvanizing:
`
`ASTM A123
`
`G40.20-04/
`G40.21-04 (R2009)
`
`W59-03 (R2008)
`
`CAN/CSA-G164
`
`CERTIFICATION & CLASSIFICATION
`
`Certifi cation:
`
`UNITED STATES
`
`CANADA
`
`Structural:
`
`ANSI/AISC 360-05
`ASCE/SEI 7-05
`
`CSA S16-09
`CSA S-37
`NBC-05
`
`Electrical:
`
`3426-83
`UL 1598
`
`3426-03
`CSA C22.2 No.250
`
`All Swivelpole products in all available fi nishes are
`listed by CSA as Certifi ed under Master Contract
`number 257018
`
`DESIGN COMPLIANCE
`The Swivelpole™ product range has been developed to meet the
`design criteria of a range of site conditions, including cyclonic
`winds, corrosive and hazardous environments.
`For additional information on our products and product
`confi gurations to suit your design compliance needs, please
`contact us at info@swivelpole.com.
`Site engineers are responsible for determining the relevant design
`criteria, including design wind speed and to select the
`appropriate products from the Swivelpole™ product range to
`meet this criteria.
`
`MAXIMUM LUMINAIRE WEIGHT
`Recommended: 44lbs (for one-person operation).
`
`INFORMATION
`
`SERVICE
`
`From application review through to product recommendation, our
`network of sales and support staff are committed to assisting you
`every step of the way.
`
`Email:
`
`
`info@swivelpole.com
`sales@swivelpole.com
`
`QUALITY ASSURANCE
`
`All Swivelpole™ products are manufactured and/or assembled to comply
`with a prescribed QMS based on ISO 9001 world standards.
`
`PATENT
`
`The Swivelpole product range is protected by patents and registered
`designs worldwide including U.S. Patent No 6957832 and European
`Patent No 1226387, and can only be sold and/or manufactured under
`licence granted by Swivelpole Patent Pty Ltd. All rights reserved.
`
`COPYRIGHT
`
`This document and all its contents is the property of Swivelpole Patent
`Pty Ltd and is protected by copyright worldwide. Unauthorised use and
`reproduction is strictly prohibited. All rights reserved.
`
`WARRANTIES*
`
`1. All equipment and goods are warranted by the Seller to be free
`from defects in material and workmanship for fi ve (5) years from
`the date of shipment.
` THIS WARRANTY DOES NOT APPLY TO EQUIPMENT OR
`GOODS WHICH ARE MISUSED, ABUSED OR DAMAGED FROM
`INSTALLATION, OR NOT USED IN ACCORDANCE WITH SELLER’S
`INSTRUCTIONS. NORMAL WEAR OF EQUIPMENT OR GOODS
`ARE NOT INCLUDED IN THIS WARRANTY.
` No responsibility will be taken for any modifi cations, alterations or
`additions to the standard product design. This includes exceeding
`recommended maximum weights for any fi ttings or exceeding the
`installed height.
`
`2. Equipment or goods not manufactured by the Seller but supplied
`through the Seller shall carry the warranty of the original
`manufacturer.
` THE SELLER’S SOLE LIABILITY UNDER THIS WARRANTY SHALL BE
`LIMITED TO EITHER REPLACING OR REPAIRING WITHOUT
`CHARGE, AT ITS FACTORY OR ELSEWHERE AT ITS DISCRETION,
`ANY EQUIPMENT OR GOODS NOT MEETING THIS WARRANTY, OR
`AT SELLER’S OPTION, REFUNDING THE PURCHASE PRICE. THE
`SELLER SHALL IN NO EVENT BE LIABLE FOR ANY OTHER DIRECT
`OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES OF
`ANY KIND UNDER THIS CONTRACT OR OTHERWISE.
`
`* subject to change without notice
`
`DISCLAIMER
`The adequacy of the guardrail and supporting structure must be
`verifi ed by a site approved engineer. Swivelpole Group Pty Ltd will
`accept no responsibility for failure due to inadequacy of the supporting
`structure or guardrail to which the Swivelpole™ is mounted.
`
`Swivelpole Product Catalogue NEC V2-4. Printed March 2014.
`
`SwivelpoleTM Product Catalogue
`
` 3
`
`Petitioner Ensign
`Exhibit 1004 - 5 of 28
`
`

`

`High-Safety Luminaire Support System
`
`APPLICATIONS:
`Walkway lighting, platforms, stairways, spiral stairways, conveyors
`
`S
`
`Stanchion
`Mounted
`• Stanchion mounting free of handrail
`• Vertical installation on inclines such as conveyors
`
`S
`
`Stanchion and Structure
`Mounted
`• Combined stanchion and structure mounting for reduced
`vibration and longer lamp life
`
`S1
`
`S3
`
`S2
`
`S4
`
`PAGE 6-7
`
`PAGE 8-9
`
` Mounting Kits
`
`Junction Box Plates
`
`Security Cover
`
`Multi-Purpose Mounts
`
`Luminaire Mounts
`
`PAGE 10-11
`
`PAGE 12
`
`PAGE 12
`
`PAGE 12
`
`PAGE 24-25
`
`4
`
`
`CAD drawings available online: swivelpole.com
`
`Petitioner Ensign
`Exhibit 1004 - 6 of 28
`
`

`

`APPLICATIONS:
`Walkway lighting, platforms,
`stairways, spiral stairways, conveyors
`
`
`Internal structures
`
`ST
`
`Structure
`Mounted
`• Structure mounting independent of guardrail
`• Reduced vibration and longer lamp life
`• Suitable for fl oor mounting
`
`C
`
`Column/Wall Mounted
`• Up to 13’ (4000mm) installed heights
`
`Area and fl ood lighting
`
`F
`
`Floor
`Mounted
`• Up to 13’ (4000mm)
`installed heights
`
`ST6
`
`ST7
`
`C1
`
`C2
`
`F2
`
`R13
`
`PAGE 14-15
`
`PAGE 16-18
`
`PAGE 18
`
`R
`
`Retrofi t System
`
`• Conversions of non-lowering poles
`• Renewing pole top utilizing existing
`pole base
`
`PAGE 19-23
`
`SwivelpoleTM Product Catalogue
`
` 5
`
`Petitioner Ensign
`Exhibit 1004 - 7 of 28
`
`

`

`S1
`
`Stanchion Mounted
`
`Mounting Kits
`PAGE 10-11
`
`Junction Box Plates
`PAGE 12
`
`Luminaire Mounts
`PAGE 24-25
`
`Applications
`• Ideal for area lighting along industrial walkways, platforms,
`stairways, spiral stairways
`
`Features & Benefi ts
`• NPS 2” base section
`• Stanchion mounting direct to guardrail
`• Slotted base section for raised junction box, allowing safe and
`effi cient installation and termination
`• Inclined brackets, allow vertical installation on inclines such as
`conveyors etc
`
`Confi guration as illustrated
`Well Glass
`
`S1-3000-P
`Model:
`Mounting brackets: MBK2-2-50
`Junction box plate:
`JBK1101
`
`10’
`(3000mm)
`
`OD
`
`Length
`
`60.3
`"
`"
`
`3’ 7” (1100)
`"
`"
`
`Top Section
`
`NPS
`
`1½ ”
`"
`"
`
`DN
`
`40
`"
`"
`
`Product Code
`
`OD
`
`Length ‘T’
`
`Top Section Options
`
`48.3
`"
`"
`
`3’ 11” (1200)
`"
`"
`
`Threaded
`Plain, no slot
`Plain, slot options
`
`S1-2400-T
`S1-2400-P
`S1-2400-PS/PSF
`
`*Optional slotted top for cable entry Refer to page 24
`
`3’ 7” (1100)
`
`T
`
`2” (50)
`
`1½ ” (40)
`
`Ordering Information
`
`Installed Height
`
`Base Section
`
`8’ (2400)
`"
`"
`
`10’ (3000)
`"
`"
`
`NPS
`
`2”
`"
`"
`
`2”
`"
`"
`
`DN
`
`50
`"
`"
`50
`"
`"
`
`48.3
`40
`1½ ”
`3’ 7” (1100)
`60.3
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
` NPS nominal pipe size DN nominal size OD outside diameter
`
`Threaded
`5’ 11” (1800)
`S1-3000-T
`Plain, no slot
`"
`S1-3000-P
`Plain, slot options
`"
`S1-3000-PS/PSF
` All dimensions are in imperial/metric (nominal) and may diff er from published table
`
`6
`
`
`CAD drawings available online: swivelpole.com
`
`Petitioner Ensign
`Exhibit 1004 - 8 of 28
`
`

`

`S3
`
`Stanchion Mounted
`
`Mounting Kits
`PAGE 10-11
`
`Junction Box Plates
`PAGE 12
`
`Luminaire Mounts
`PAGE 24-25
`
`Applications
`• Ideal for area lighting along industrial walkways, platforms,
`stairways, spiral stairways, roof tops
`
`Features & Benefi ts
`• NPS 1 ½” base section
`• Threaded ends for fully enclosed wiring methods
`• Designed for installation in accordance with NEC standards
`
`Standard Installed Lengths
`• 8’ (2400mm)
`• 10’ (3000mm)
`
`Confi guration as illustrated
`LED
`
`S3-3000-T
`Model:
`Mounting Brackets: MBK2-2-40
`
`10’
`(3000mm)
`
`*Optional slotted top for cable entry Refer to page 24
`
`3’ 11” (1200)
`
`T
`
`1½ ” (40)
`
`1½ ” (40)
`
`Ordering Information
`
`Installed Height
`
`Base Section
`
`Top Section
`
`Product Code
`
`NPS
`
`DN
`
`OD
`
`Length
`
`NPS
`
`DN
`
`OD
`
`Length ‘T’
`
`3’ 11” (1200)
`48.3
`40
`1½ ”
`8’ (2400)
`3’ 11” (1200)
`48.3
`40
`10’ (3000)
`1½ ”
` NPS nominal pipe size DN nominal size OD outside diameter
`
`3’ 11” (1200)
`48.3
`40
`1½ ”
`S3-2400-T
`5’ 11” (1800)
`48.3
`40
`1½ ”
`S3-3000-T
` All dimensions are in imperial/metric (nominal) and may diff er from published table
`
`SwivelpoleTM Product Catalogue
`
` 7
`
`Petitioner Ensign
`Exhibit 1004 - 9 of 28
`
`

`

`S2
`
`Stanchion & Structure
`Mounted
`
`Mounting Kits
`PAGE 10-11
`
`Junction Box Plates
`PAGE 12
`
`Luminaire Mounts
`PAGE 24-25
`
`Applications
`• Ideal for area lighting along industrial walkways, platforms,
`stairways, spiral stairways
`• For areas subject to vibration, such as conveyor walkways
`
`Features & Benefi ts
`• NPS 2” base section
`• Combined stanchion and structure mounting resulting in
`reduced vibration and longer lamp life
`• Slotted base section for raised junction box, allowing safe and
`effi cient installation and termination
`
`Confi guration as illustrated
`Well Glass
`
`S2-3000-P
`Model:
`Mounting brackets: MBK2-5A-50
`Junction box plate:
`JBK1101
`
`10’
`(3000mm)
`
`OD
`
`Length
`
`60.3
`"
`"
`
`4’ 3” (1300)
`"
`"
`
`Top Section
`
`NPS
`
`1½ ”
`"
`"
`
`DN
`
`40
`"
`"
`
`Product Code
`
`OD
`
`Length ‘T’
`
`Top Section Options
`
`48.3
`"
`"
`
`3’ 11” (1200)
`"
`"
`
`Threaded
`Plain, no slot
`Plain, slot options
`
`S2-2400-T
`S2-2400-P
`S2-2400-PS/PSF
`
`*Optional slotted top for cable entry Refer to page 24
`
`4’ 3” (1300)
`
`T
`
`2” (50)
`
`1½ ” (40)
`
`Ordering Information
`
`Installed Height
`
`Base Section
`
`8’ (2400)
`"
`"
`
`10’ (3000)
`"
`"
`
`NPS
`
`2”
`"
`"
`
`2”
`"
`"
`
`DN
`
`50
`"
`"
`50
`"
`"
`
`48.3
`40
`1½ ”
`4’ 3” (1300)
`60.3
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
` NPS nominal pipe size DN nominal size OD outside diameter
`
`Threaded
`5’ 11” (1800)
`S2-3000-T
`Plain, no slot
`"
`S2-3000-P
`Plain, slot options
`"
`S2-3000-PS/PSF
` All dimensions are in imperial/metric (nominal) and may diff er from published table
`
`8
`
`
`CAD drawings available online: swivelpole.com
`
`Petitioner Ensign
`Exhibit 1004 - 10 of 28
`
`

`

`Applications
`• Ideal for area lighting along industrial walkways, platforms,
`stairways, spiral stairways, roof tops
`
`Features & Benefi ts
`• NPS 1 ½” base section
`• Threaded ends for fully enclosed wiring methods
`• Combined stanchion and structure mounting resulting in
`reduced vibration and longer lamp life
`• Designed for installation in accordance with NEC standards
`
`Standard Installed Lengths
`• 8’ (2400mm)
`• 10’ (3000mm)
`
`Confi guration as illustrated
`LED
`
`S4-3000-T
`Model:
`Mounting Brackets: MBK2-2-40
`
`10’
`(3000mm)
`
`S4
`
`Stanchion & Structure
`Mounted
`
`Mounting Kits
`PAGE 10-11
`
`Junction Box Plates
`PAGE 12
`
`Luminaire Mounts
`PAGE 24-25
`
`*Optional slotted top for cable entry Refer to page 24
`
`T
`
`1½ ” (40)
`
`4’ 5” (1350)
`
`1½ ” (40)
`
`Ordering Information
`
`Installed Height
`
`Base Section
`
`Top Section
`
`Product Code
`
`NPS
`
`DN
`
`OD
`
`Length
`
`NPS
`
`DN
`
`OD
`
`Length ‘T’
`
`4’ 5” (1350)
`48.3
`40
`1½ ”
`8’ (2400)
`4’ 5” (1350)
`48.3
`40
`10’ (3000)
`1½ ”
` NPS nominal pipe size DN nominal size OD outside diameter
`
`3’ 11” (1200)
`48.3
`40
`1½ ”
`S4-2400-T
`5’ 11” (1800)
`48.3
`40
`1½ ”
`S4-3000-T
` All dimensions are in imperial/metric (nominal) and may diff er from published table
`
`SwivelpoleTM Product Catalogue
`
` 9
`
`Petitioner Ensign
`Exhibit 1004 - 11 of 28
`
`

`

`The Swivelpole™ versatile mounting kits allow adjustment in the
`orientation of the Safe Swivel™ joint mechanism.
`
`Adjusting the orientation of the Safe Swivel™ joint in combination
`with the luminaire mount, allows flexibility in avoiding clash and
`obtaining the desired maintenance position (see page 2).
`
`Mounting Kits
`Simple installation
`
`S1 KITS
`Stanchion
`mounted
`
`U-bolt to stanchion
`
`Clamp to stanchion
`
`Bolt/Weld to stanchion
`
`U-bolt to incline stanchion
`
`MBK2-2-50
`
`MBK6-6-50
`
`MBK1-1-50
`
`MBK8-8-50
`
`S2 KITS
`Stanchion
`& structure
`mounted
`
`U-bolt to stanchion
`
`Clamp to stanchion
`
`Bolt/Weld to stanchion
`
`U-bolt to mid-rail
`
`Bolt to Structure
`
`MBK2-5-50
`
`MBK6-5-50
`
`MBK1-5-50
`
`MBK7-5-50
`
`Bolt to Structure
`
`MBK2-5A-50
`
`MBK6-5A-50
`
`MBK1-5A-50
`
`MBK7-5A-50
`
`Weld to Structure
`
`MBK2-4-50
`
`MBK6-4-50
`
`MBK1-4-50
`
`MBK7-4-50
`
`10
`
`
`CAD drawings available online: swivelpole.com
`
`Petitioner Ensign
`Exhibit 1004 - 12 of 28
`
`

`

`Mounting Kits
`Simple installation
`
`S3 KITS
`Stanchion
`mounted
`
`U-bolt to stanchion
`
`Clamp to stanchion
`
`Bolt/Weld to stanchion
`
`U-bolt to incline stanchion
`
`MBK2-2-40
`
`MBK6-6-40
`
`MBK1-1-40
`
`MBK8-8-40
`
`S4 KITS
`Stanchion
`& structure
`mounted
`
`U-bolt to stanchion
`
`Clamp to stanchion
`
`Bolt/Weld to stanchion
`
`U-bolt to mid-rail
`
`Bolt to Structure
`
`MBK2-5-40
`
`MBK6-5-40
`
`MBK1-5-40
`
`MBK7-5-40
`
`Bolt to Structure
`
`MBK2-5A-40
`
`MBK6-5A-40
`
`MBK1-5A-40
`
`MBK7-5A-40
`
`Weld to Structure
`
`MBK2-4-40
`
`MBK6-4-40
`
`MBK1-4-40
`
`MBK7-4-40
`
`SwivelpoleTM Product Catalogue
`
` 11
`
`Petitioner Ensign
`Exhibit 1004 - 13 of 28
`
`

`

`Junction Box Plates
`Simple installation and termination
`
`Ordering Information
`
`Suits models
`
`U-bolt kit size
`
`Off set mounted
`
`Double, centre mounted
`
`Double, off set mounted
`
`S1, S2
`"
`ST6, ST7
`"
`
`NPS 2” (DN 50)
`"
`NPS 2½ ” (DN 65)
`"
`
`JBPK1101
`JPBK 1100-UNI (blank)
`JBPK1101-65
`JPBK 1100-UNI-65 (blank)
`
`JBPK1201
` –
`JBPK1201-65
`–
`
`JBPK1301
`–
`JBPK1301-65
`–
`
`Security Cover
`
`• Optional security covers available
`• For use in public spaces where
`tamper proofi ng is required
`• One size fi ts all models
`
`Multi-purpose
`Mounts
`
`• Alarms
`• Antennas
`• CCTV
`• Gas Detectors
`• Sirens
`• Signals
`• Windsocks
`
`MULTI-PURPOSE
`BOLT-ON
`
`¾ ” NPT
`threaded cable
`entry
`
`LMK6101
`8.5 x 25mm slots
`@ PCD 89mm
`8.5 x 25mm slots
`@ PCD 123mm
`
`12
`
`
`CAD drawings available online: swivelpole.com
`
`Ordering Information
`
`SC-001-HG
`
`2 x ¾ ” NPT
`threaded cable
`entry
`
`LMK6401
`(cid:15477) 10mm @ 153mm ctrs.
`
`LMK5101
`12 x 28mm slot, centred
`t
`12 x 28mm slots
`@ 94mm ctrs.
`12 x 40mm slots
`@ 174mm ctrs.
`
`Petitioner Ensign
`Exhibit 1004 - 14 of 28
`
`

`

`Offi cially certifi ed to
`withstand the world’s
`strongest winds
`
`There’s no pole stronger than a
`Swivelpole™. They’ve been put
`through rigorous independent
`engineering simulations and
`analysis, including wind tunnel
`testing, to prove they will withstand
`the harshest conditions and even
`cyclonic winds over 200mph.
`
`In fact, Swivelpole™ is built so tough,
`it will easily outlast the life of a
`typical project or plant.
`
`That is why it’s been the
`luminaire support solution of
`choice in some of the world’s
`most remote and challenging
`locations since 1999.
`
`Lowering Costs, Raising Standards
`
`SwivelpoleTM Product Catalogue
`
` 13
`
`Petitioner Ensign
`Exhibit 1004 - 15 of 28
`
`

`

`ST6 ST7
`
`Structure Mounted
`Independent of the Guardrail
`
`Junction
`Box Plates
`PAGE 12
`
`Luminaire
`Mounts
`PAGE 24-25
`
`
`
`Applications
`• Ideal for area lighting along industrial walkways, platforms,
`cooling towers
`• Suitable for fl oor mounting
`
`Features & Benefi ts
`
`• NPS 2½ ” base section for reduced vibration and longer lamp life
`• ST6 - NPS 1½ ” top section
`• ST7 - NPS 2” top section for high wind regions
`• Slotted base section for raised junction box
`• Earth (ground) tab
`
`Confi guration as illustrated
`Well Glass
`
`Model:
`Junction box plate:
`
`ST6-3000-T
`JBPK-1101-65
`
`10’
`(3000mm)
`
`Base plate
`(cid:15477) 10” (250)
`
`*Optional threaded cable entry available
`
`3’ 9” (1150)
`
`*Optional slotted top for cable entry Refer to page 24
`
`T
`
`2½ ” (65)
`
`ST7: 2” (50)
`ST6: 1½ ” (40)
`
`Ordering Information
`
`Installed Height
`
`Base Section
`
`8’ (2400)
`"
`"
`
`10’ (3000)
`"
`"
`8’ (2400)
`"
`10’ (3000)
`"
`
`NPS
`
`2½ ”
`"
`"
`
`2½ ”
`"
`"
`2½ ”
`"
`2½ ”
`"
`
`DN
`
`65
`"
`"
`65
`"
`"
`65
`"
`65
`"
`
`OD
`
`73
`"
`"
`
`Length
`
`3’ 9” (1150)
`"
`"
`
`Top Section
`
`NPS
`
`1½ ”
`"
`"
`
`DN
`
`40
`"
`"
`
`Product Code
`
`OD
`
`Length ‘T’
`
`Top Section Options
`
`48.3
`"
`"
`
`3’ 11” (1200)
`"
`"
`
`Threaded
`Plain, no slot
`Plain,slot options
`
`ST6-2400-T
`ST6-2400-P
`ST6-2400-PS/PSF
`
`48.3
`40
`1½ ”
`3’ 9” (1150)
`73
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`60.3
`50
`2”
`3’ 9” (1150)
`73
`"
`"
`"
`"
`"
`60.3
`50
`2”
`3’ 9” (1150)
`73
`"
`"
`"
`"
`"
` NPS nominal pipe size DN nominal size OD outside diameter
`
`Threaded
`5’ 11” (1800)
`ST6-3000-T
`Plain, no slot
`"
`ST6-3000-P
`Plain, slot options
`"
`ST6-3000-PS/PSF
`Plain, no slot
`3’ 11” (1200)
`ST7-2400-P
`Plain, slot options
`"
`ST7-2400-PS/PSF
`Plain, no slot
`5’ 11” (1800)
`ST7-3000-P
`Plain, slot options
`"
`ST7-3000-PS/PSF
` All dimensions are in imperial/metric (nominal) and may diff er from published table
`
`14
`
`
`CAD drawings available online: swivelpole.com
`
`Petitioner Ensign
`Exhibit 1004 - 16 of 28
`
`

`

`The Swivelpole™
`doesn’t need
`to rely on the
`guardrail
`
`The Swivelpole™ ST series is
`mounted to the structure
`completely independent of the
`guardrail.
`
`It keeps the guardrail free of
`obstructions and reduces
`vibration for longer lamp life.
`
`SwivelpoleTM Product Catalogue
`
` 15
`
`Petitioner Ensign
`Exhibit 1004 - 17 of 28
`
`

`

`Mount Swivelpole™
`to an existing wall
`or column
`
`The Swivelpole™ C series
`allows you to mount to a
`wall or column to a height
`of 13’ (4000mm).
`
`It features a sturdy right-
`angle bracket which simply
`bolts to an existing
`structure – and which can
`also include an integral
`junction box.
`
`It’s ideal for mounting
`luminaires both inside and
`outside of structures and
`sub-stations.
`
`16
`
`
`CAD drawings available online: swivelpole.com
`
`Petitioner Ensign
`Exhibit 1004 - 18 of 28
`
`

`

`Applications
`• Ideal for internal structure lighting,
`area lighting and sub-station walls
`
`Features & Benefi ts
`• Column or wall mounting
`• C1: NPS 1½ ” for pole height to 10’ (3000mm)
`• C2: NPS 2” for pole height to 13’ (4000mm)
`
`Confi guration as illustrated
`LED
`
`Model:
`Luminaire mount:
`
`C1-3000-T
`LMK5101-40
`
`10’
`(3000mm)
`
`Product Code
`
`C1-2400-T
`
`C1-2400-P
`
`Plain, no slot
`
`Plain, slot options
`
`C1-2400-PS/PSF
`
`Top Section
`
`NPS
`
`1½ ”
`
`"
`
`"
`
`DN
`
`40
`
`"
`
`"
`
`"
`
`"
`
`"
`
`"
`
`OD
`
`Length ‘T’
`
`Top Section Options
`
`48.3
`
`3’ 11” (1200)
`
`Threaded
`
`1½ ”
`
`40
`
`48.3
`
`5’ 11” (1800)
`
`Threaded
`
`C1-3000-T
`
`C1 C2
`Column/Wall Mounted
`
`Security Cover
`PAGE 12
`
`Luminaire Mounts
`PAGE 24-25
`
`*Optional slotted top for cable entry Refer to page 24
`
`T
`
`C2: 2” (50)
`C1: 1½ ” (40)
`
`6”
`
`5⅛ ”
`
`Ordering Information
`
`Installed Height
`
`Base Section
`
`8’ (2400)
`
`"
`
`"
`
`NPS
`
`DN
`
`OD
`
`Length
`
`–
`
`"
`
`"
`
`–
`
`–
`
`"
`
`"
`
`–
`
`–
`
`"
`
`"
`
`–
`
`–
`
`"
`
`"
`
`–
`
`10’ (3000)
`
`"
`
`"
`
`10’ (3000)
`
`"
`
`13’ (4000)
`
`"
`
`"
`
`"
`
`–
`
`"
`
`–
`
`"
`
`"
`
`"
`
`–
`
`"
`
`–
`
`"
`
`"
`
`"
`
`–
`
`"
`
`–
`
`"
`
`"
`
`"
`
`–
`
`"
`
`–
`
`"
`
`"
`
`"
`
`2”
`
`"
`
`2”
`
`"
`
`"
`
`"
`
`50
`
`"
`
`50
`
`"
`
`"
`
`"
`
`"
`
`"
`
`Plain, no slot
`
`C1-3000-P
`
`Plain, slot options
`
`C1-3000-PS/PSF
`
`60.3
`
`5’ 11” (1800)
`
`Plain, no slot
`
`C2-3000-P
`
`"
`
`"
`
`Plain, slot options
`
`C2-3000-PS/PSF
`
`60.3
`
`9’ 2” (2800)
`
`Plain, no slot
`
`C2-4000-P
`
`"
`
`"
`
`Plain, slot options
`
`C2-4000-PS/PSF
`
` NPS nominal pipe size DN nominal size OD outside diameter
`
` All dimensions are in imperial/metric (nominal) and may diff er from published table
`
`SwivelpoleTM Product Catalogue
`
` 17
`
`Petitioner Ensign
`Exhibit 1004 - 19 of 28
`
`

`

`F2
`
`Applications
`• Ideal for low level fl ood lighting on industrial platforms,
`cooling towers, switch yards, decks, laydown areas, car parks
`
`Floor Mounted
`
`Features & Benefi ts
`• Floor mounting to 13’ (4000mm)
`• 3’3” square hollow section base
`• Base access panel
`
`Confi guration as illustrated
`Floodlight
`
`Model:
`Luminaire mount:
`Cage bolt:
`
`F2-4000-P
`LMK5101-50
`CBK220
`
`Security Cover
`F2-SC
`
`13’
`(4000mm)
`
`Cage Bolt
`CBK220
`
`Security Cover
`PAGE 12
`
`Luminaire Mounts
`PAGE 24-25
`
`*Optional slotted top for cable entry Refer to page 24
`
`T
`
`2” (50)
`
`3’ 3”
`
`Base plate
`11½ ” x 11½ ”
`
`Ordering Information
`
`Installed Height
`
`Base Section
`
`Top Section
`
`Product Code
`
`SHS
`
`Length
`
`NPS
`
`DN
`
`OD
`
`Length ‘T’
`
`Top Section Options
`
`13’ (4000)
`"
`
`6” x 6” (150 x 150)
`"
`
`60.3
`50
`2”
`3’ 3” (1000)
`"
`"
`"
`"
` NPS nominal pipe size DN nominal size OD outside diameter
`
`Plain, no slot
`10’ (3000)
`F2-4000-P
`Plain, slot options
`"
`F2-4000-PS/PSF
` All dimensions are in imperial/metric (nominal) and may diff er from published table
`
`18
`
`
`CAD drawings available online: swivelpole.com
`
`Petitioner Ensign
`Exhibit 1004 - 20 of 28
`
`

`

`Retrofi t System
`
`Turn your costs around with the
`Swivelpole™ Retrofi t System
`
`On average, you can retrofi t a non-lowering pole
`for under half the cost of changing a lamp using the
`traditional method (from actual case studies).
`
`Once fi tted with a Swivelpole™ you can reduce your
`ongoing lighting maintenance costs by an average of
`
`95%.
`
`Retrofi t Range
`
`Retrofi t
`Assist Kit
`
`R1
`
`R2
`
`R3
`
`Applications
`
`Allows replacement
`of faulty luminaires,
`upgrades to new
`lighting technology
`and replacement of
`corroded or oversized
`pole tops.
`
`• Swivelpole™ R1
`Conversions
`reusing existing
`pole
`
`• Swivelpole™ R2,
`R3 Conversion
`renewing pole
`top while utilizing
`existing pole base
`
`PAGE 21-23
`
`PAGE 20
`
`SwivelpoleTM Product Catalogue
`
` 19
`
`Petitioner Ensign
`Exhibit 1004 - 21 of 28
`
`

`

`Retrofi t Assist Kit
`
`For safe and effi cient
`conversion of non-
`lowering light poles.
`
`Depending on the preferred disconnection method, there are two pole conversion tool kits
`available.
`
`The Swivelpole™ Retrofi t Assist Pole Conversion Tool clamps to and safely supports the light
`pole, which is then cold cut with a Ratchet Pipe Cutter, eliminating the need for hot work
`permits.
`
`The luminaire can then be safely lowered using the swivel mechanism where disconnection
`is performed at the t-fi tting (Retrofi t Assist Kit 1) or alternatively by using the Mid Hinge
`(Retrofi t Assist Kit 2) which allows lowering the luminaire without the need to disconnect.
`
`The Swivelpole™ Retrofi t – R1, R2 or R3 - then simply fastens onto the existing pole and the
`pole is ready for service.
`
`All work takes place at platform level eliminating the risks of working at heights.
`
`Tools recommended
`for installation of
`R1, R2 and R3 models
`
`Retrofi t Assist Kit 1*
`For disconnection at junction box or T-fi tting
`
`Ordering Information
`To suit Pole Size
`
`Retrofi t Assist Kit 1
`
`NPS
`
`1¼ ”
`
`1½ ”
`
`2”
`
`DN
`
`32
`
`40
`
`50
`
`OD
`
`42.4
`
`48.3
`
`60.3
`
`Ordering Code
`RAK1-PCT-32
`RAK1-PCT-40
`RAK1-PCT-50
`
`Retrofi t Assist Kit 2*
`For disconnection at luminaire
`
`Ordering Information
`To suit Pole Size
`
`Retrofi t Assist Kit 2
`
`NPS
`
`1¼ ”
`
`1½ ”
`
`2”
`
`DN
`
`32
`
`40
`
`50
`
`OD
`
`42.4
`
`48.3
`
`60.3
`
`Ordering Code
`RAK2-PCT-32
`RAK2-PCT-40
`RAK2-PCT-50
`
`* All Kits include
`1 x Riggers Bag
`1 x Ratchet Pipe Cutter
`3 x Spare blades
`1 x Socket wrench
`
`Product Code
`RA-RGB-01
`RA-RPC-01
`RA-RPC-01-SB
`RA-SKWR
`
`Retrofi t Assist Kit 2
`Pole Conversion Tool
`RA-MH-PCT
`
`Mid Hinge RA-MH
`
`Retrofi t Assist – Interchangeable Pole Clamps
`Kits come with the pole clamp sizes as indicated in the ordering code.
`Other sizes can be ordered to accommodate diff erent pipe sizes.
`
`Ordering Information
`To suit Pole Size
`NPS
`DN
`
`1¼ ”
`
`1½ ”
`
`2”
`
`32
`
`40
`
`50
`
`Ordering Code
`Pole Conversion
`Mid Hinge
`Tool
`RA-IPC-32
`RA-IPC-40
`RA-IPC-50
`
`MH-IPC-32
`MH-IPC-40
`MH-IPC-50
`
`OD
`
`42.4
`
`48.3
`
`60.3
`
`20
`
`
`CAD drawings available online: swivelpole.com
`
`Retrofi t Assist
`Kit 1
`Pole Conversion Tool
`RA-PCT
`
`Includes Pole
`Conversion Tool
`Product Code
`RA-PCT-32
`RA-PCT-40
`RA-PCT-50
`
`Includes Pole
`Conversion Tool
`Product Code
`RA-MH-PCT-32
`RA-MH-PCT-40
`RA-MH-PCT-50
`
`Includes Mid
`Hinge
`Product Code
`RA-MH-32
`RA-MH-40
`RA-MH-50
`
`Re
`Retrofi t Assist -Ratchet Pipe Cutter
`
`
`
`Retrofi t Assist - Socket WrenchRetrofi t Assis
`
`Note: Tools are available for
`conversion of PVC coated poles.
`
`Petitioner Ensign
`Exhibit 1004 - 22 of 28
`
`

`

`R1
`
`Conversion re-using
`existing pole
`
`Retrofi t Assist Kit
`PAGE 20
`
`Applications
`• To convert NPS 1½ ” and NPS 2” non-lowering poles to a
`Swivelpole™
`• Allows replacement of faulty luminaires
`• Allows the upgrade to new lighting design and technology
`
`Features & Benefi ts
`• Locking collars allow adjustment in orientation of the
`Safe Swivel™ joint to avoid clash with infrastructure
`• Retrofi t Assist system allows safe and effi cient installation
`eliminating the need for hot work permits
`• Conversion takes place at platform level eliminating the
`risks of working at heights
`
`Confi guration as illustrated
`Well Glass
`
`Model: R1-40
`
`Suits existing pole sizes
`NPS 1½ ” and NPS 2”
`
`10’
`(3000mm)
`
`Ordering Information
`
`Installed Height
`
`Base Section:
`Suits existing pole size
`NPS
`DN
`OD
`
`Top Section:
`Suits existing pole size
`NPS
`DN
`OD
`
`Product Code
`
`10’ (3000)
`
`1¼ ”
`
`32
`
`42.2
`
`1¼ ”
`
`32
`
`42.2
`
`R1-32
`
`"
`"
`
`48.3
`40
`1½ ”
`60.3
`50
`2”
` NPS nominal pipe size DN nominal size OD outside diameter
`
`48.3
`40
`1½ ”
`R1-40
`60.3
`50
`2”
`R1-50
` All dimensions are in imperial/metric (nominal) and may diff er from published table
`
`Note: Models available for PVC pole conversion. Inquiries to info@swivelpole.com
`
`SwivelpoleTM Product Catalogue
`
` 21
`
`Petitioner Ensign
`Exhibit 1004 - 23 of 28
`
`

`

`Applications
`• To convert NPS 1¼ ” to NPS 2” non-lowering poles to a Swivelpole™
`• Allows replacement of faulty luminaires
`• Allows the upgrade to new lighting design and technology
`• Allows replacement of corroded or oversized pole tops
`Features & Benefi ts
`• Locking collars allow adjustment in orientation of the Safe Swivel™
`joint to avoid clash with infrastructure
`
`Confi guration as illustrated
`LED
`
`Model:
`
`R2-40-3000-T
`
`10’
`(3000mm)
`
`R2
`Renew pole top utilizing
`existing pole base
`
`Retrofi t Assist Kit
`PAGE 20
`
`Luminaire Mounts
`PAGE 24-25
`
`Optional slotted top for cable entry Refer to page 24
`
`T
`
`1½ ” (40)
`
`Suits existing pole sizes
`NPS 1¼ ” to NPS 2”
`
`Ordering Information
`
`Installed Height
`
`8’ (2400)
`"
`"
`"
`"
`"
`"
`"
`"
`10’ (3000)
`"
`"
`"
`"
`"
`"
`"
`"
`
`Top Section
`Base Section: Suits existing pole size
`OD
`NPS
`DN
`NPS
`DN
`OD
`48.3
`40
`32
`42.2
`1½ "
`1¼ ”
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`48.3
`40
`40
`48.3
`1½ ”
`1½ ”
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`48.3
`40
`50
`60.3
`1½ ”
`2”
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`48.3
`40
`32
`42.2
`1½ "
`1¼ ”
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`48.3
`40
`40
`48.3
`1½ ”
`1½ ”
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`48.3
`40
`50
`60.3
`1½ ”
`2”
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
`"
` NPS nominal pipe size DN nominal size OD outside diameter
`
`Product Code
`
`Top Section Options
`Length ‘T’
`Threaded
`3'11" (1200)
`R2-32-2400-T
`Plain, no slot
`"
`R2-32-2400-P
`Plain, slot options
`"
`R2-32-2400-PS/PSF
`Threaded
`3’ 11” (1200)
`R2-40-2400-T
`Plain, no slot
`"
`R2-40-2400-P
`Plain, slot options
`"
`R2-40-2400-PS/PSF
`Threaded
`3’ 11” (1200)
`R2-50-2400-T
`Plain, no slot
`"
`R2-50-2400-P
`Plain, slot options
`"
`R2-50-2400-PS/PSF
`Threaded
`5'11" (1800)
`R2-32-3000-T
`Plain, no slot
`"
`R2-32-3000-P
`Plain, slot options
`"
`R2-32-3000-PS/PSF
`Threaded
`5’ 11” (1800)
`R2-40-3000-T
`Plain, no slot
`"
`R2-40-3000-P
`Plain, slot options
`"
`R2-40-3000-PS/PSF
`Threaded
`5’ 11” (1800)
`R2-50-3000-T
`Plain, no slot
`"
`R2-50-3000-P
`Plain, slot options
`"
`R2-50-3000-PS/PSF
` All dimensions are in imperial/metric (nominal) and may diff er from published table
`
`22
`
`
`CAD drawings available online: swivelpole.com
`
`Petitioner Ensign
`Exhibit 1004 - 24 of 28
`
`

`

`Applications
`• To convert NPS 2½ ” and NPS 3” non-lowering poles to a Swivelpole™
`• Allows replacement of faulty luminaires
`• Allows the upgrade to new lighting design and technology
`• Allows replacement of corroded o