`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`A.4.3 IUT configuration
`
`Item
`
`JUT configuration
`
`References
`
`Status
`
`Support
`
`* CF!
`* CF2
`* CF3
`
`* CF4
`
`* CFS
`
`What is the configuration of the JUT?
`Access Point (AP)
`Independent station (not an AP)
`Frequency-Hopping spread spectrum
`(FHSS) PHY for the 2.4 GHz band
`Direct Sequence Spread Spectrum
`(DSSS) PHY for the 2.4 GHz band
`Infrared PHY
`
`5.2
`5.2
`
`0.1
`0.1
`0.2
`
`0.2
`
`0.2
`
`Yes□ No□
`Yes□ No□
`Yes O No 0
`Yes□No□
`Yes□ No□
`
`A.4.4 MAC protocol
`
`A.4.4.1 MAC protocol capabilities
`
`Item
`
`Protocol capability
`
`References
`
`Status
`
`Support
`
`Are the following MAC protocol capabilities
`supported?
`Authentication service
`
`Authentication state
`Open System authentication
`Shared Key authentication
`WEP algorithm
`
`WEP Encryption procedure
`
`WEP Decryption procedure
`
`Security services management
`Distributed Coordination function
`
`Net Allocation Vector (NAV)
`function
`Interframe space usage and timing
`
`Random Backoff function
`DCF Access procedure
`
`Random Backoff procedure
`Recovery procedures and
`retransmit limits
`RTS/CTS procedure
`
`PC!
`
`PCI.I
`PCl.2
`PCl.3
`* PC2
`
`PC2.1
`
`PC2.2
`
`PC2.3
`PC3
`
`PC3.l
`
`PC3.2
`
`PC3.3
`PC3.4
`
`PC3.5
`PC3.6
`
`PC3.7
`
`M
`
`M
`M
`PC2:M
`0
`
`PC2:M
`
`PC2:M
`
`5.4.3.1,
`5.4.3.2,
`5.7.6, 5.7.7,
`8.1,Annex C
`5.5
`8.1.1
`8.1.2, 8.3
`5.4.3.3, 8.2,
`Annex C
`8.2.3, 8.2.4,
`8.2.5
`8.2.3, 8.2.4,
`8.2.5
`8.3
`9.1, 9.2,
`Annex C
`9.2.1, 9.2.5, M
`9.3.2.2
`9.2.3, 9.2.5, M
`9.2.10
`9.2.4
`9.2.5.1,
`9.2.5.5
`9.2.5.2
`9.2.5.3
`
`M
`M
`
`M
`M
`
`M
`M
`
`9.2.5.4,
`9.2.5.6,
`9.2.5.7
`
`M
`
`Yes□No□
`
`Yes O No 0
`Yes□ No□
`Yes O No ON/A 0
`Yes□No□
`
`Yes O No ON/A 0
`
`Yes O No ON/A 0
`Yes□No□
`Yes □No□
`Yes□ No□
`Yes□No□
`
`Yes O No O
`Yes O No O
`Yes□No□
`Yes □No□
`Yes□ No□
`
`Copyright© 1999 IEEE. All rights reserved.
`
`245
`
`
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`LOCAL AND METROPOLITAN AREA NETWORKS: WIRELESS LAN
`
`Status
`M
`M
`
`M
`
`A.4.4.1 MAC protocol capabilities (continued)
`
`Item
`
`PC3.8
`PC3.9
`
`PC3.I0
`
`Protocol capability
`
`Directed MPDU transfer
`Broadcast and multicast MPDU
`transfer
`MAC level acknowledgment
`
`PC3.ll
`* PC4
`
`Duplicate detection and recovery
`Point coordinator (PC)
`
`PC4.l
`
`PC4.2
`* PC4.3
`PC4.4
`PC4.5
`
`* PCS
`
`PCS.I
`
`PC5.2
`
`PC5.3
`PC6
`
`PC7
`
`PC8
`
`PCS.I
`PC8.2
`PC9
`
`* PCI0
`
`PCI0.I
`
`PCll
`
`PC! I.I
`
`PC! 1.2
`
`PCl 1.3
`PC! 1.5
`PCll.5
`
`Maintenance of CFP structure
`and timing
`PCF MPDU transfer from PC
`PCF MPDU transfer to PC
`Overlapping PC provisions
`Polling list maintenance
`
`CF-Pollable
`
`Interpretation of CFP structure
`and timing
`PCF MPDU transfer to/from
`and CF-Pollable STA
`Polling list update
`Fragmentation
`
`Defragmentation
`
`MAC data service
`
`Reorderable-Multicast service class
`StrictlyOrdered service class
`Multirate support
`
`Multiple outstanding MSDU support
`
`Multiple outstanding MSDU
`transmission restrictions
`Timing synchronization
`
`Timing in an infrastructure
`network
`Timing in an Independent BSS
`(IBSS)
`Beacon Generation function
`TSF synchronization and accuracy
`Infrastructure BSS initialization
`
`References
`9.2.6
`9.2.7
`
`9.2.2,
`9.2.8
`9.2.9
`9.1, 9.3,
`Annex C
`9.3.1, 9.3.2
`
`9.3.3
`9.3.3
`9.3.3.2
`9.3.4
`
`9.1, 9.3,
`Annex C
`9.3.1, 9.3.2
`
`9.3.3
`
`9.3.4
`9.2, 9.4,
`Annex C
`9.2, 9.5,
`Annex C
`9.1.5, 9.8,
`Annex C
`9.8
`9.8
`9.6,
`Annex C
`9.8,
`Annex C
`9.8
`
`II.I,
`Annex C
`II.I.I.I,
`11.1.4
`11. l. l.2,
`11.1.4
`11.1.2
`11.1.2
`11.1.3
`
`Support
`Yes□No□
`Yes □No□
`Yes□ No□
`Yes□No□
`Yes□ No□NIA □
`Yes□ No□ NIA□
`Yes□ No□NIA □
`Yes□No□N/AD
`Yes□ No □NIA□
`Yes□ No□ NIA□
`Yes□ No□NIA □
`Yes□ No □NIA□
`Yes□ No□ NIA□
`Yes□ No □NIA□
`Yes□ No□
`Yes □No□
`Yes□ No□
`Yes□No□
`Yes□ No□
`Yes□ No□
`Yes□No□
`0
`PCI0:M Yes□ No □NIA□
`Yes □No□
`Yes□ No □NIA□
`Yes□No□N/AD
`Yes□ No□ NIA□
`Yes□No□
`Yes□ No □NIA□
`
`M
`CFl:O
`
`PC4:M
`
`PC4:M
`PC4:O
`PC4:M
`PC4.3:
`M
`CF2:O
`
`PC5:M
`
`PC5:M
`
`PC5:M
`M
`
`M
`
`M
`
`M
`0
`M
`
`M
`
`CFl:M
`
`CF2:M
`
`M
`M
`CFl:M
`
`246
`
`Copyright© 1999 IEEE. All rights reserved.
`
`
`
`MEDIUM ACCESS CONTROL (MAC) AND PHYSICAL (PHY) SPECIFICATIONS
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`A.4.4.1 MAC protocol capabilities (continued)
`
`Protocol capability
`
`References
`
`Status
`
`Item
`
`PCll.6
`PCll.7
`PCll.8
`PC! 1.9
`PC! 1.10
`PC12
`
`Independent BSS initialization
`Passive scanning
`Active scanning
`Probe response
`Hop Synchronization function
`Infrastructure power management
`
`PC12.1
`
`Station power management modes
`
`PC12.2
`
`TIM transmission
`
`PC12.3
`PC12.4
`PC12.5
`PC12.6
`PC12.7
`PCJ3
`
`PCl3.1
`
`PCJ3.2
`PCl3.3
`PC14
`
`PC14.l
`PC14.2
`PC14.3
`PC14.4
`PC14.5
`PC15
`PC15.l
`
`* PCJ5.2
`PC15.3
`
`* PC15.4
`PC15.5
`
`AP function during CP
`AP function during CFP
`Receive function during CP
`Receive function during CFP
`Aging function
`IBSS power management
`
`Initialization of power
`management
`STA power state transitions
`ATIM and frame transmission
`Association and reassociation
`
`Association state
`STA association procedure
`AP association procedure
`STA reassociation procedure
`AP reassociation procedure
`Management information base (MIB)
`dot 11 SMTbase,
`dot! I SmtAuthenticationAlgorithms
`dot! I SMTprivacy
`dotl JMACbase, dot! !CountersGroup,
`dotl !MacGroupAddresses
`dot 11 MACStatistics
`dot! !ResourceType!D
`
`11.1.3
`11.1.3
`11.1.3
`11.1.3
`11.1.5
`11.2.1,
`Annex C
`11.2.1.l,
`11.2.1.8
`11.2.1.2,
`11.2.1.3
`11.2.1.4
`11.2.1.5
`11.2.1.6
`11.2.1.7
`11.2.1.9
`11.2.2,
`Annex C
`11.2.2.2
`
`11.2.2.3
`11.2.2.4
`5.4, 5.7,
`11.3,
`Annex C
`5.5
`11.3.1
`11.3.2
`11.3.3
`11.3.4
`Annex D
`AnnexD
`
`Annex D
`AnnexD
`
`AnnexD
`Annex D
`
`CF2:M
`CF2:M
`CF2:M
`M
`CF3:M
`M
`
`CF2:M
`
`CFJ:M
`
`CFJ:M
`PC4:M
`CF2:M
`PC5:M
`CFJ:M
`CF2:M
`
`CF2:M
`
`CF2:M
`CF2:M
`M
`
`M
`CF2:M
`CFJ:M
`CF2:M
`CFl:M
`M
`M
`
`PC2:M
`M
`
`0
`M
`
`Support
`Yes□ No □NIA□
`Yes□ No □NIA□
`Yes□ No □NIA□
`Yes□ No□
`Yes□ No □NIA□
`Yes□ No□
`Yes□ No □NIA□
`Yes□ No□ NIA□
`Yes□ No □NIA□
`Yes□ No □NIA□
`Yes□ No □NIA□
`Yes□ No □NIA□
`Yes□ No□ NIA□
`Yes□ No □NIA□
`Yes□ No□ NIA□
`Yes□ No □NIA□
`Yes□ No □NIA□
`Yes□ No□
`
`Yes□ No□
`Yes□ No □NIA□
`Yes□ No □NIA□
`Yes□ No □NIA□
`Yes□ No □NIA□
`Yes□ No□
`Yes□ No□
`Yes□ No □NIA□
`Yes□ No□
`Yes□ No□
`Yes□ No□
`
`Copyright© 1999 IEEE. All rights reserved.
`
`247
`
`
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`LOCAL AND METROPOLITAN AREA NETWORKS: WIRELESS LAN
`
`A.4.4.2 MAC frames
`
`Item
`
`MAC frame
`
`References
`
`Status
`
`Support
`
`ls transmission of the following
`MAC frames supported?
`Association request
`Association response
`Reassociation request
`Reassociation response
`Probe request
`Probe response
`Beacon
`ATIM
`Disassociation
`Authentication
`Deauthentication
`PS-Poll
`RTS
`CTS
`ACK
`CF-End
`CF End+CF-Ack
`Data
`Data+ CF-Ack
`
`Data+ CF-Poll
`Data+ CF-Ack+CF-Poll
`Null
`CF-Ack (no data)
`
`7,Annex C
`
`7
`7
`7
`7
`7
`7
`7
`7
`7
`7
`7
`7
`7
`7
`7
`7
`7
`7
`7
`
`7
`7
`7
`7
`
`CF-Poll (no data)
`CF-Ack+CF-Poll (no data)
`ls reception of the following MAC
`frames supported?
`Association request
`Association response
`Reassociation request
`Reassociation response
`Probe request
`Probe response
`Beacon
`ATlM
`Disassociation
`Authentication
`
`7
`7
`7,AnnexC
`
`7
`7
`7
`7
`7
`7
`7
`7
`7
`7
`
`CF2:M
`CFl:M
`CF2:M
`CFl:M
`CF2:M
`M
`M
`CF2:M
`M
`M
`M
`CF2:M
`M
`M
`M
`PC4:M
`PC4:M
`M
`(PC4 OR
`PC5):M
`PC4.3:M
`PC4.3:M
`M
`(PC4 OR
`PC5):M
`PC4.3:M
`PC4.3:M
`
`CFl:M
`CF2:M
`CFl:M
`CF2:M
`M
`M
`M
`CF2:M
`M
`M
`
`Yes□ No ON/A□
`Yes□ No ON/A□
`Yes□ No ON/A□
`Yes□ No ON/A□
`Yes□ No ON/A□
`Yes□No□
`Yes□No□
`Yes□ No ON/A□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□ No ON/A□
`Yes□No□
`Yes□ No□
`Yes□No□
`Yes□ No□ NIA□
`Yes□ No□ NIA□
`Yes□ No□
`Yes□ No ON/A□
`Yes□ No ON/A□
`Yes□ No□ NIA□
`Yes□No□
`Yes□ No□ NIA□
`Yes□ No□ NIA□
`Yes□ No ON/A□
`
`Yes □No ON/A□
`Yes□ No ON/A□
`Yes□ No ON/A□
`Yes□ No□ NIA□
`Yes□No□
`Yes□ No□
`Yes□ No□
`Yes□ No ON/A□
`Yes□ No□
`Yes□ No□
`
`FT!
`FT2
`FT3
`FT4
`FTS
`FT6
`FT7
`FT8
`FT9
`FTI0
`FT!!
`FT12
`FT13
`FT14
`FT15
`FT16
`FT17
`FT18
`FT19
`
`FT20
`FT21
`FT22
`FT23
`
`FT24
`FT25
`
`FRI
`FR2
`FR3
`FR4
`FR5
`FR6
`FR7
`FR8
`FR9
`FRIO
`
`248
`
`Copyright© 1999 IEEE. All rights reserved.
`
`
`
`MEDIUM ACCESS CONTROL (MAC) AND PHYSICAL (PHY) SPECIFICATIONS
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`A.4.4.2 MAC frames (continued)
`
`Item
`
`MAC frame
`
`References
`
`Status
`
`FRI!
`FR12
`FR13
`FR14
`FR15
`FR16
`FR17
`FR18
`FR19
`FR20
`FR21
`FR22
`FR23
`
`FR24
`FR25
`
`Deauthentication
`PS-Poll
`RTS
`CTS
`ACK
`CF-End
`CF End+CF-Ack
`Data
`Data+ CF-Ack
`Data+ CF-Poll
`Data+ CF-Ack+CF-Poll
`Null
`CF-Ack (no data)
`
`CF-Poll (no data)
`CF-Ack+CF-Poll (no data)
`
`7
`7
`7
`7
`7
`7
`7
`7
`7
`7
`7
`7
`7
`
`7
`7
`
`M
`CFl:M
`M
`M
`M
`M
`M
`M
`M
`PC5:M
`PC5:M
`M
`(PC4 OR
`PC5):M
`PC5:M
`PC5:M
`
`Support
`Yes D No D
`Yes□ No □NIA□
`Yes□No□
`Yes D No D
`Yes□ No□
`Yes□No□
`Yes□No□
`Yes D No D
`Yes D No D
`Yes D No D N/A D
`Yes□ No □NIA□
`Yes□No□
`Yes D No ON/AD
`Yes□ No □NIA□
`Yes□ No □NIA□
`
`A.4.4.3 Frame exchange sequences
`
`Item
`
`FSI
`FS2
`
`Frame exchange sequence
`Are the following frame sequences
`supported?
`Basic frame sequences
`CF-Frame sequences
`
`A.4.4.4 MAC addressing functions
`
`References
`
`Status
`
`Support
`
`Yes□ No□
`9.7,AnnexC M
`9.7,Annex C
`(PC4 OR PC5):M Yes D No ON/AD
`
`Item
`
`MAC Address function
`
`References
`
`Status
`
`Support
`
`Are the following MAC Addressing
`functions supported?
`STA universal individual
`IEEE 802 address
`BSS identifier generation
`
`Receive address matching
`
`ADI
`
`AD2
`
`AD3
`
`M
`
`M
`
`M
`
`5.3.3,
`7.1.3.3
`7.1.3.3,
`11.1.3,
`Annex C
`7.1.3.3,
`7.2.2,
`Annexe
`
`Yes□No□
`
`Yes D No D
`
`Yes D No ON/AD
`
`Copyright© 1999 IEEE. All rights reserved.
`
`249
`
`
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`LOCAL AND METROPOLITAN AREA NETWORKS: WIRELESS LAN
`
`A.4.5 Frequency-Hopping PHY functions
`
`Item
`
`Protocol feature
`
`References
`
`Status
`
`Support
`
`Which requirements and options does the
`PHY support?
`PHY service primitive parameters
`TXVECTOR parameter: LENGTH
`TXVECTOR parameter: PLCPBITRATE
`PLCPBITRATE = X'00' (1.0 Mbit/s)
`PLCPBITRATE = X'02' (2.0 Mbit/s)
`RXVECTOR parameter: LENGTH
`RXVECTOR parameter: RSSI
`PLCP frame format
`PLCP Preamble: Sync
`PLCP Preamble: Start Frame Delimiter
`PLCP Header: Length Word
`PLCP Header: Signaling field
`PLCP Header: Header Error Check
`PLCP Data Whitener: Scrambling and
`bias suppression encoding
`PLCP Transmit procedure
`Transmit: transmit on MAC request
`Transmit: format and whiten frame
`Transmit: Timing
`PLCP CS/CCA procedure
`CS/CCA: perform on a minimum of one
`antenna
`CS/CCA: Detect preamble starting up to
`20 µs after start of slot time
`CS/CCA: Detect preamble starting at
`least 16 µs prior to end of slot time
`CS/CCA: Detect random data
`CS/CCA: Perform on antenna with
`essentially same gain and pattern as
`transmit antenna
`CS/CCA: Detect valid SFD and PLCP
`header
`CS/CCA: Maintain BUSY indication
`until end oflength contained in valid
`PLCP header
`PLCP Receive procedure
`Receive: Receive and dewhiten frame
`PHYLME
`PLME: Support FH sync
`PLME: Support PLME primitives
`
`14.2.2.1
`14.2.2.2
`14.2.2.2
`14.2.2.2
`14.2.3.1
`14.2.3.2
`
`14.3.2.1.1
`14.3.2.1.2
`14.3.2.2.1
`14.3.2.2.2
`14.3.2.2.3
`14.3.2.3,
`14.3.3.1.1
`
`14.3.3.1.1
`14.3.3.1.1
`14.3.3.1.1
`
`14.3.3.2.1
`
`14.3.3.2.1
`
`14.3.3.2.1
`
`14.3.3.2.1
`14.3.3.2.1
`
`14.3.3.2.1
`
`14.3.3.2.1
`
`M
`M
`M
`0
`M
`0
`
`M
`M
`M
`M
`M
`M
`
`M
`M
`M
`
`M
`
`M
`
`M
`
`M
`M
`
`M
`
`M
`
`14.3.3.3.1
`
`M
`
`14.4.2.2
`14.4.3.2
`
`M
`0
`
`*
`
`FHI
`FHl.l
`FHl.2
`FHl.2.1
`FHl.2.2
`FHl.3
`FHl.4
`FH2
`FH2.l
`FH2.2
`FH2.3
`FH2.4
`FH2.5
`FH2.6
`
`FH3
`FH3.1
`FH3.2
`FH3.3
`FH4
`FH4.1
`
`FH4.2.
`
`FH4.3
`
`FH4.4
`FH4.5
`
`FH4.6
`
`FH4.7
`
`FH5
`FH5.l
`FH6
`FH6.1
`FH6.2
`
`Yes□No□
`Yes□No□
`Yes□ No□
`Yes□No□
`Yes□No□
`Yes□ No□
`
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□ No□
`Yes□No□
`Yes□No□
`
`Yes□No□
`Yes□No□
`Yes□No□
`
`Yes □No□
`Yes□No□
`Yes □No□
`Yes□No□
`Yes □No□
`
`Yes□No□
`Yes□No□
`
`Yes□No□
`
`Yes□ No□
`Yes□No□
`
`250
`
`Copyright© 1999 IEEE. All rights reserved.
`
`
`
`MEDIUM ACCESS CONTROL (MAC) AND PHYSICAL (PHY) SPECIFICATIONS
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`A.4.5 Frequency-Hopping PHY functions (continued)
`
`Item
`
`FH7
`* FH7.I
`FH7.l.l
`FH7.l.2
`FH7.l.3
`FH7.l.4
`FH7.l.5
`FH7.2
`FH7.3
`FH7.4
`FH7.5
`FH7.6
`FH7.7
`FH7.8
`FH8
`FH8.l
`
`FH8.2
`FH8.3
`FH8.4
`FH8.5
`FH8.6
`FH8.7
`FH8.8
`FH8.9
`
`FH8.I0
`FH8.II
`FH8.12
`FH8.13
`FH8.14
`
`FH8.15
`
`FH8.16
`
`FH8.17
`
`FH8.18
`
`Protocol feature
`
`References
`
`Status
`
`Support
`
`Geographic area specific requirements
`Geographic areas
`North America
`Most of Europe
`Japan
`Spain
`France
`Operating frequency range
`Number of operating channels
`Operating channel frequencies
`Occupied channel bandwidth
`Minimum hop rate
`Hop sequences
`Unwanted emissions
`I Mbit/s PMD
`Modulation 2GFSK, BT=0.5, I =positive
`frequency deviation, 0=negative
`frequency deviation
`Peak frequency deviation
`Zero-Crossing error
`Nominal channel data rate
`Channel switching/settling time
`Receive to transmit switch time
`Nominal transmit power
`Transmit power levels
`Transmit power level control to
`<I00mW
`Transmit spectrum shape
`Transmit center frequency tolerance
`Transmitter ramp periods
`Receiver input dynamic range
`Receiver center frequency acceptance
`range
`Clear channel assessment power thresh-
`old for a probability of detection of 90%
`(preamble)/70% (random data) for I 00
`mW units
`Clear channel assessment power thresh-
`old for units > I 00 mW; sensitivity
`threshold is 1/2 dB lower for every dB
`above 20 dBm
`Minimum receiver sensitivity at
`FER=3% with 400 octet frames
`Intermodulation protection
`
`14.6.2
`14.6.2
`14.6.2
`14.6.2
`14.6.2
`14.6.3
`14.6.4
`14.6.5
`14.6.6
`14.6.7
`14.6.8
`14.6.9
`
`0.1
`0.1
`0.1
`0.1
`0.1
`FH7.l:M
`FH7.l:M
`FH7.l:M
`FH7.l:M
`FH7.l:M
`FH7.l:M
`FH7.l:M
`
`14.6.10
`
`M
`
`14.6.10
`14.6.10
`14.6.11
`14.6.12
`14.6.13
`14.6.14.1
`14.6.14.2
`14.6.14.3
`
`14.6.14.4
`14.6.14.5
`14.6.14.6
`14.6.15.1
`14.6.15.2
`
`14.6.15.3
`
`M
`M
`M
`M
`M
`M
`M
`M
`
`M
`M
`M
`M
`M
`
`M
`
`14.6.15.3
`
`M
`
`14.6.15.4
`
`14.6.15.5
`
`M
`
`M
`
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes D No D
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes D No D
`
`Yes□No□
`
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes □No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes □No□
`
`Yes□No□
`
`Yes□No□
`Yes□No□
`
`Copyright© 1999 IEEE. All rights reserved.
`
`251
`
`
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`LOCAL AND METROPOLITAN AREA NETWORKS: WIRELESS LAN
`
`A.4.5 Frequency-Hopping PHY functions (continued)
`
`Item
`
`FH8.19
`FH8.20
`FH8.20.l
`FH8.20.2
`FH8.20.3
`FH9
`FH9.l
`FH9.2
`FH9.3
`FH9.4
`FH9.5
`FH9.6
`
`FH9.7
`FH9.8
`FHI0
`
`FHI0.I
`
`Protocol feature
`
`References
`
`Desensitization
`Operating temperature range
`Temperature type I
`Temperature type 2
`Temperature type 3
`2 Mbit/s PMD
`All IM PMD requirements
`Modulation 4GFSK, BT=0.5
`Frame structure for 2M PHY
`Nominal channel data rate
`Input dynamic range
`Minimum receiver sensitivity at
`FER=3% with 400 octet frames
`Intermodulation protection
`Desensitization
`MIB
`
`dot! IPhyFHSSComplianceGroup,
`dot! !PhyRegDomainsSupportGroup,
`and
`dot! I PhyOperationComplianceGroup
`
`14.6.15.6
`14.6.16
`14.6.16
`14.6.16
`14.6.16
`
`14.7.1
`14.7.2
`14.7.2.1
`14.7.3
`14.7.4
`14.7.5
`
`14.7.6
`14.7.7
`13.1, 14.8,
`Annex D
`13.1,14.8
`
`Status
`M
`M
`0
`0
`0
`
`Support
`Yes□No□
`Yes□No□
`Yes□No□
`Yes D No D
`Yes D No D
`
`FHl.2.2:M Yes□ No□ NIA□
`FHl.2.2:M Yes D No D NIA□
`FHl.2.2:M Yes□ No D NIA□
`FHl.2.2:M Yes□No D NIA□
`FHl.2.2:M Yes□No D NIA□
`FHl.2.2:M Yes □No□ NIA□
`FHl.2.2:M Yes □No D NIA□
`FHl.2.2:M Yes D No D NIA□
`Yes□No□
`M
`Yes□ No□
`
`M
`
`A.4.6 Direct sequence PHY functions
`
`Item
`
`PHY feature
`
`PLCP sublayer procedures
`Preamble prepend on TX
`PLCP frame format
`PLCP integrity check generation
`TX rate change capability
`Supported data rates
`Data whitener scrambler
`Scrambler initialization
`Preamble process on RX
`PLCP frame format
`PLCP integrity check verify
`RX Rate change capability
`Data whitener descrambler
`PN code sequence
`Chipping continue on power down
`Operating channel capability
`
`DSI
`DSl.l
`DSl.2
`DSl.3
`DSl.4
`DSl.5
`DSl.6
`DS2
`DS2.l
`DS2.2
`DS2.3
`DS2.4
`DS3
`DS4
`*DS5
`252
`
`Status
`
`References
`15.2
`M
`15.2.1
`15.2.2, 15.2.3
`M
`15.2.3, 15.2.3.6 M
`15.2.3.3, 15.2.5 M
`15.1, 15.2.3.3
`M
`15.2.4
`M
`15.2.4
`M
`15.2.1
`15.2.2, 15.2.3
`M
`15.2.3, 15.2.3.6 M
`15.2.3.3, 15.2.5 M
`M
`15.2.4
`M
`15.4.6.3
`0
`15.2.6
`15.2.6, 15.4.6.2
`
`Support
`
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`
`Copyright© 1999 IEEE. All rights reserved.
`
`
`
`MEDIUM ACCESS CONTROL (MAC) AND PHYSICAL (PHY) SPECIFICATIONS
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`A.4.6 Direct sequence PHY functions (continued)
`
`Item
`* DS5.I
`DSS.1.1
`DSS.1.2
`DSS.1.3
`DS5.l.4
`DS5. I.5
`DSS.1.6
`DSS.1.7
`DSS.1.8
`DSS.1.9
`DSS.1.10
`DS5.l.l l
`* DS5.2
`DSS.2.1
`DSS.2.2
`DSS.2.3
`DS5.2.4
`DS5.2.5
`DS5.2.6
`DS5.2.7
`DS5.2.8
`DS5.2.9
`DS5.2.I0
`DS5.2.ll
`* DS5.3
`DS5.3.l
`DS5.3.2
`DS5.3.3
`DS5.3.4
`DS5.3.5
`DS5.3.6
`DS5.3.7
`DS5.3.8
`DS5.3.9
`DS5.3.10
`DS5.3.l 1
`DS5.3.12
`DS5.3.13
`* DS5.4
`DS5.4.l
`
`PHY feature
`
`References
`
`Status
`
`North America (FCC)
`channel I
`channel 2
`channel3
`channe14
`channel 5
`channel 6
`channel 7
`channel 8
`channel9
`channel 10
`channel 11
`Canada (IC)
`channel I
`channel 2
`channel3
`channel4
`channel 5
`channel 6
`channel 7
`channel 8
`channel9
`channel IO
`channel 11
`Europe (ETSI)
`channel I
`channel2
`channel 3
`channel4
`channels
`channel6
`channel 7
`channel 8
`channel 9
`channel IO
`channel 11
`channel 12
`channel 13
`France
`channel JO
`
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`15.2.6, 15.4.6.2
`
`DSS:O.1
`DS5.l:M
`DS5.l:M
`DS5.l:M
`DS5.1:M
`DS5.l:M
`DS5.l:M
`DS5.l:M
`DS5.I:M
`DS5.l:M
`DS5.l:M
`DS5.I:M
`DS5:O.l
`DS5.2:M
`DS5.2:M
`DS5.2:M
`DS5.2:M
`DS5.2:M
`DSS.2:M
`DS5.2:M
`DS5.2:M
`DSS.2:M
`DS5.2:M
`DS5.2:M
`DS5:O.l
`DS5.3:M
`DS5.3:M
`DS5.3:M
`DS5.3:M
`DSS.3:M
`DS5.3:M
`DS5.3:M
`DS5.3:M
`DS5.3:M
`DS5.3:M
`DS5.3:M
`DS5.3:M
`DS5.3:M
`DS5:O.l
`DS5.4:M
`
`Support
`Yes□ No□ NIA□
`Yes□No□NIA□
`Yes □No□ NIA□
`Yes □No□ NIA□
`Yes □No□ NIA□
`Yes □No□ NIA□
`Yes □No□NIA □
`Yes □No□ NIA□
`Yes □No□ NIA□
`Yes□ No□ NIA□
`Yes□ No□NIA □
`Yes□ No□ NIA□
`Yes□ No □NIA□
`Yes□ No□ NIA□
`Yes□ No□ NIA□
`Yes□ No□ NIA□
`Yes□ No□ NIA□
`Yes□ No□ NIA□
`Yes□ No□ NIA□
`Yes□ No□ NIA□
`Yes □No□ NIA□
`Yes □No□ NIA□
`Yes □No□ NIA□
`Yes□ No□ NIA□
`Yes□No □NIA□
`Yes□ No □NIA□
`Yes□No□NIA□
`Yes□No□NIA□
`Yes□ No □NIA□
`Yes□ No □NIA□
`Yes□ No □NIA□
`Yes □No □NIA□
`Yes □No□ NIA□
`Yes □No□ NIA□
`Yes □No□ NIA□
`Yes□ No □NIA□
`Yes□ No □NIA□
`Yes□No□NIA□
`Yes□ No □NIA□
`Yes□ No □NIA□
`
`Copyright© 1999 IEEE. All rights reserved.
`
`253
`
`
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`LOCAL AND METROPOLITAN AREA NETWORKS: WIRELESS LAN
`
`A.4.6 Direct sequence PHY functions (continued)
`
`Item
`
`DS5.4.2
`DS5.4.3
`DS5.4.4
`* DS5.5
`DS5.5.l
`DS5.5.2
`* DS5.6
`DS6
`DS6.l
`DS6.2
`*DS7
`DS7.l
`DS7.2
`DS7.3
`DS7.4
`
`DS7.5
`
`DS8
`
`DS9
`
`*DSI0
`DSI0.l
`*DSII
`
`DSI I.I
`*DS12
`DS12.l
`DSl2.2
`DSl3
`DS14
`DS15
`DS16
`DSl7
`
`DSl8
`DS19
`DS20
`
`PHY feature
`
`References
`
`Status
`
`15.2.6, 15.4.6.2
`channel 11
`15.2.6, 15.4.6.2
`channel 12
`15.2.6, 15.4.6.2
`channel 13
`15.2.6, 15.4.6.2
`Spain
`15.2.6, 15.4.6.2
`channel 10
`15.2.6, 15.4.6.2
`channel 11
`15.2.6, 15.4.6.2
`Japan (RCR)
`15.4.6.4
`Bits to symbol mapping
`15.4.6.4
`I Mbit/s
`15.4.6.4
`2 Mbit/s
`15.4.8.4
`CCA functionality
`15.4.8.4
`Energy Only (RSSI above threshold)
`15.4.8.4
`IEEE 802.11 DSSS correlation
`15.4.8.4
`Both methods
`Hold CCA busy for packet duration of 15.2.7
`a correctly received PLCP but carrier
`lost during reception of MPDU
`Hold CCA busy for packet duration of 15.2.7
`a correctly received but out of
`specification PLCP
`Transmit antenna selection
`
`Receive antenna diversity
`
`Antenna port(s) availability
`50 Q impedance
`Transmit power level support
`
`If greater than I 00 mW capability
`Radio type (temperature range)
`Type I
`Type2
`Spurious emissions conformance
`TX-RX turnaround time
`RX-TX turnaround time
`Slot time
`ED reporting time
`
`Minimum transmit power level
`Transmit spectral mask conformance
`Transmitted center frequency
`tolerance
`
`15.4.5.5,
`15.4.5.6
`15.4.5.5,
`15.4.5.6,
`15.4.5.7
`15.4.6.9
`15.4.6.9
`15.4.5.8,
`15.4.7.3
`15.4.7.3
`15.4.6.10
`15.4.6.10
`15.4.6.10
`15.4.6.5
`15.4.6.6
`15.4.6.7
`15.4.6.8
`15.4.6.8,
`15.4.8.4
`15.4.7.2
`15.4.7.4
`15.4.7.5
`
`DS5.4:M
`DS5.4:M
`DS5.4:M
`DS5:O.l
`DS5.5:M
`DS5.5:M
`DS5:O.l
`
`M
`M
`
`DS7:O.2
`DS7:O.2
`DS7:O.2
`M
`
`M
`
`0
`
`0
`
`0
`DSI0:M
`0
`
`DSll:M
`
`DSl2:O.3
`DS12:O.3
`M
`M
`M
`M
`M
`
`M
`M
`M
`
`Support
`Yes□No□NIA□
`Yes□ No□ NIA□
`Yes□ No□ NIA□
`Yes□ No□NIA □
`Yes□ No□ NIA□
`Yes□ No□ NIA□
`Yes□No□NIA□
`
`Yes□No□
`Yes□No□
`
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`
`Yes□No□
`
`Yes□No□
`Yes□No□
`
`Yes□No□
`Yes□ No□ NIA□
`Yes□No□
`Yes □No□NIA □
`
`Yes□ No□ NIA□
`Yes □No□ NIA□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`
`254
`
`Copyright© 1999 IEEE. All rights reserved.
`
`
`
`MEDIUM ACCESS CONTROL (MAC) AND PHYSICAL (PHY) SPECIFICATIONS
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`A.4.6 Direct sequence PHY functions (continued)
`
`Item
`
`PHY feature
`
`References
`
`15.4.7.6
`15.4.7.7
`15.4.7.7
`15.4.7.8
`15.4.7.9
`15.4.8.1
`
`Status
`M
`M
`M
`M
`M
`M
`
`DS21
`DS22
`DS23
`DS24
`DS25
`DS26
`
`DS27
`DS28
`DS29
`
`Chip clock frequency tolerance
`Transmit power on ramp
`Transmit power down ramp
`RF carrier suppression
`Transmit modulation accuracy
`Receiver minimum input level
`sensitivity
`Receiver maximum input level
`Receiver adjacent channel rejection
`MIB
`
`DS29.l
`
`dot! IPhyDSSSComplianceGroup,
`dot! IPhyRegDomainsSupportGroup,
`and
`dot! IPhyOperationComplianceGroup
`
`A.4. 7 Infrared baseband PHY functions
`
`Item
`
`IR!
`
`IR2
`
`IR3
`
`IR4
`
`IRS
`
`* IR5a
`
`Feature
`
`Is the transmitted SYNC field length in the
`range ofrequired number of PPM slots, with
`the absence of a pulse in the last slot of the
`field?
`Is the transmitted SYNC field entirely popu-
`lated by alternating presence and absence of
`pulses in consecutive PPM slots, with the
`absence of a pulse in the last slot of the field?
`Is the transmitted SFD field the binary
`sequence 100 I , where I indicates a pulse in
`the PPM slot and O indicates no pulse in the
`PPM slot?
`Is the transmitted DR field pulse sequence
`equal to the correct value for the data rate
`provided by the TXVECTOR parameter
`PLCP BITRATE, where I indicates a pulse
`in the PPM slot and O indicates no pulse in
`the PPM slot?
`Is the transmitted DCLA field 32 PPM
`slots long with the specified sequence for
`I Mbit/s, where I indicates a pulse in the
`PPM slot and O indicates no pulse in the
`PPM slot?
`I Mbit/s:
`00000000100000000000000010000000
`Does the unit support 2 Mbit/s transmission?
`
`Support
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□No□
`Yes□ No□
`Yes□No□
`
`15.4.8.2
`15.4.8.3
`13.1, 15.3.2,
`AnnexD
`13.1, 15.3.2
`
`M
`M
`M
`
`M
`
`Support
`
`References
`
`16.2.4.1
`
`Status
`M
`
`16.2.4.1
`
`16.2.4.2
`
`16.2.4.3
`
`M
`
`M
`
`M
`
`16.2.4.4
`
`M
`
`Yes□
`
`Yes□
`
`Yes□
`
`Yes□
`
`Yes□
`
`16.2.4.4
`
`0
`
`Yes□No□
`
`Copyright© 1999 IEEE. All rights reserved.
`
`255
`
`
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`LOCAL AND METROPOLITAN AREA NETWORKS: WIRELESS LAN
`
`A.4.7 Infrared baseband PHY functions (continued)
`
`Feature
`
`If the unit supports 2 Mbit/s transmission,
`is the transmitted DCLA field 32 PPM
`slots long with the specified sequence for
`2 Mbit/s, where I indicates a pulse in the
`PPM slot and 0 indicates no pulse in the
`PPM slot?
`2 Mbit/s:
`00100010001000100010001000100010
`Is the transmitted LENGTH field the correct
`PPM representation of the unsigned 16-bit
`binary integer, lsb transmitted first, equal to
`the correct value provided by the TXVEC-
`TOR parameter LENGTH?
`Is the transmitted CRC field the correct PPM
`representation of the CRC value calculated
`as per reference subclause, transmitted lsb
`first?
`Is the transmitted PSDU field the correct
`PPM representation of the PSDU, transmit-
`ted lsb first?
`When the CCA is false does transmission
`begin based on PHYTXSTART.request?
`Does the PHY issue a PHYTXSTART.con-
`firm after the transmission of the PLCP
`header?
`Does the PHY accept each octet of the
`PSDU in a PHYDATA.request and answer
`with a PHYDATA.confirm?
`Does the PHY cease transmission in
`response to a PHYTXEND.request and
`answer with a PHYTXEND.confirm?
`Does the PHY of a receiving STA send a
`PHYCCA.indicate during reception of the
`SYNC field?
`Does the PHY of a receiving STA properly
`receive a transmission that changes data rate
`according to the DR field?
`Does the PHY of a receiving STA properly
`reject an incorrect CRC?
`Does the PHY of a receiving STA properly
`reject a DR field other than those specified in
`reference subclause?
`Does the PHY of a receiving STA send
`PHYRXSTART.indicate with correct RATE
`and LENGTH parameters after proper recep-
`tion of PLCP preamble and PLCP header?
`Does the PHY of a receiving STA forward
`receive octets in PHYDATA.indicate primi-
`tives?
`Does the PHY of a receiving STA send a
`PHYRXEND.indicate after the final octet
`indicated by the LENGTH field?
`
`Item
`
`IR5b
`
`IR6
`
`IR?
`
`IRS
`
`IR9
`
`IRI0
`
`IRII
`
`IR12
`
`IR13
`
`IR14
`
`IR15
`
`IRl6
`
`IR17
`
`IRIS
`
`IRl9
`
`256
`
`References
`
`Status
`
`16.2.4.4
`
`IR5a:M
`
`Support
`Yes □No ON/AD
`
`16.2.4.5
`
`16.2.4.6
`
`16.2.4.7
`
`16.2.5.1
`
`16.2.5.1
`
`16.2.5.1
`
`16.2.5.1
`
`16.2.5.2
`
`16.2.5.2
`
`16.2.5.2
`
`M
`
`M
`
`M
`
`M
`
`M
`
`M
`
`M
`
`M
`
`M
`
`M
`
`16.2.5.2, 16.2.4.3 M
`
`16.2.5.2
`
`16.2.5.2
`
`16.2.5.2
`
`M
`
`M
`
`M
`
`Yes□
`
`Yes□
`
`Yes□
`
`Yes□
`Yes□
`
`Yes□
`
`Yes□
`
`Yes□
`
`Yes□
`
`Yes□
`Yes□
`
`Yes□
`
`Yes□
`
`Yes□
`
`Copyright© 1999 IEEE. All rights reserved.
`
`
`
`MEDIUM ACCESS CONTROL (MAC) AND PHYSICAL (PHY) SPECIFICATIONS
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`A.4.7 Infrared baseband PHY functions (continued)
`
`Item
`
`Feature
`
`Support
`
`References
`
`16.2.5.2
`
`Status
`M
`
`16.2.5.3
`
`M
`
`16.3.2.1, 16.3.2.2 M
`
`16.3.2.1, 16.3.2.2 IR5a:M
`
`Yes□
`
`Yes□
`
`Yes□
`
`Yes□
`
`16.3.2.4
`
`16.3.3.1
`
`M
`
`0.1
`
`Yes□
`Yes□ No□ NIA□
`
`16.3.3.1
`
`0.1
`
`Yes□ No□NIA □
`
`16.3.3.2
`
`16.3.3.3
`
`M
`
`IR25:M
`
`Yes□
`Yes□ No□NIA □
`
`16.3.3.3
`
`IR26:M
`
`Yes□ No□ NIA□
`
`16.3.3.4
`
`16.3.3.5
`
`16.3.4.1
`
`16.3.4.2
`
`16.3.4.3
`
`16.3.5.1
`
`M
`
`M
`
`M
`
`M
`
`M
`
`M
`
`Yes□
`Yes□
`
`Yes□
`
`Yes□
`Yes□
`Yes□
`
`IR20
`
`IR21
`
`IR22
`
`IR23
`
`IR24
`
`* IR25
`
`* IR26
`
`Does the PHY of a receiving STA send a
`PHYCCA.indicate with a state value of
`IDLE after the PHYRXEND.indicate?
`Does the PHY reset its CCA detection mech-
`anism upon receiving a PHYC-
`CARST.request, and respond with a
`PHYCCARST.indicate?
`When transmitting at I Mbit/s does the
`PHY transmit PPM symbols according to the
`16-PPM Basic Rate Mapping table, transmit-
`ting from left to right?
`When transmitting at 2 Mbit/s does the
`PHY transmit PPM symbols according to the
`4-PPM Enhanced Rate Mapping table, trans-
`mitting from left to right?
`Does the PHY operate over a temperature
`range of 0 °C to 40 °C?
`If the unit is conformant to emitter radiation
`mask I, is the peak optical power ofan emit-
`ted pulse within the specification range aver-
`aged over the pulse width?
`If the unit is conformant to emitter radiation
`mask 2, is the peak optical power ofan emit-
`ted pulse within the specification range aver-
`aged over the pulse width?
`Does the transmitted pulse shape conform to
`the description of the reference subclause?
`Does the emitter radiation pattern as a func-
`tion of angle conform to the requirements of
`the reference subclause as applicable based
`on conformance to emitter radiation mask I?
`IR28a Does the emitter radiation pattern as a func-
`tion of angle conform to the requirements of
`the reference subclause as applicable based
`on conformance to emitter radiation mask 2?
`Is the peak emitter optical output as a func-
`tion of wavelength in the range specified?
`Does the spectrum of the transmit signal
`amplitude as a voltage or current meet the
`requirements of the reference subclause?
`Does the receiver sensitivity meet the
`requirements of the reference subclause
`for receive signals of both I Mbit/s and
`2 Mbit/s?
`Does the receiver exhibit a dynamic range as
`specified in reference subclause?
`Does the receiver field-of-view conform to
`the requirements of the reference subclause?
`When it is known that the conditions are
`such that the Carrier Detect Signal and the
`Energy Detect Signal are false is the CCA
`asserted IDLE?
`
`IR27
`
`IR28
`
`IR29
`
`IR30
`
`IR31
`
`IR32
`
`IR33
`
`IR34
`
`Copyright© 1999 IEEE. All rights reserved.
`
`257
`
`
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`LOCAL AND METROPOLITAN AREA NETWORKS: WIRELESS LAN
`
`A.4.7 Infrared baseband PHY functions (continued)
`
`Item
`
`IR35
`
`IR36
`
`IR37
`
`Feature
`
`When the conditions are such that Energy
`Detect is true for greater than the time
`defined in reference subclause, does CCA
`become IDLE?
`When conditions are such that either Carrier
`Detect or Energy Detect go true, does CCA
`go BUSY?
`Are these compliance groups implemented?
`dot! I PhyIRComplianceGroup,
`dot! IPhyRegDomainsSupportGroup, and
`dot! I PhyOperationComplianceGroup
`
`References
`
`16.3.5.1
`
`Status
`M
`
`16.3.5.1
`
`16.4
`
`M
`
`M
`
`Support
`
`Yes□
`
`Yes□
`
`Yes□
`
`258
`
`Copyright© 1999 IEEE. All rights reserved.
`
`
`
`MEDIUM ACCESS CONTROL (MAC) AND PHYSICAL (PHY) SPECIFICATIONS
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`Annex B
`(informative)
`
`Hopping sequences
`
`The following tables pertain to the hopping sequences for North America and ETSI.
`
`Copyright© 1999 IEEE. All rights reserved.
`
`259
`
`
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`LOCAL AND METROPOLITAN AREA NETWORKS: WIRELESS LAN
`
`Table B.1-Hopping sequence set 1
`
`index
`I
`2
`3
`4
`5
`6
`7
`8
`9
`10
`11
`12
`13
`14
`15
`16
`17
`18
`19
`20
`21
`22
`23
`24
`25
`26
`27
`28
`29
`30
`31
`32
`33
`34
`35
`36
`37
`38
`39
`
`0
`2
`25
`64
`10
`45
`18
`73
`49
`21
`63
`78
`31
`61
`24
`54
`65
`28
`79
`33
`4
`20
`13
`38
`74
`56
`71
`23
`5
`39
`12
`36
`68
`9
`70
`77
`6
`62
`29
`14
`
`3
`5
`28
`67
`13
`48
`21
`76
`52
`24
`66
`2
`34
`64
`27
`57
`68
`31
`3
`36
`7
`23
`16
`41
`77
`59
`74
`26
`8
`42
`15
`39
`71
`12
`73
`80
`9
`65
`32
`17
`
`6
`8
`31
`70
`16
`51
`24
`79
`55
`27
`69
`5
`37
`67
`30
`60
`71
`34
`6
`39
`10
`26
`19
`44
`80
`62
`77
`29
`11
`45
`18
`42
`74
`15
`76
`4
`12
`68
`35
`20
`
`9
`II
`34
`73
`19
`54
`27
`3
`58
`30
`72
`8
`40
`70
`33
`63
`74
`37
`9
`42
`13
`29
`22
`47
`4
`65
`80
`32
`14
`48
`21
`45
`77
`18
`79
`7
`15
`71
`38
`23
`
`12
`14
`37
`76
`22
`57
`30
`6
`61
`33
`75
`11
`43
`73
`36
`66
`77
`40
`12
`45
`16
`32
`25
`50
`7
`68
`4
`35
`17
`51
`24
`48
`80
`21
`3
`10
`18
`74
`41
`26
`
`15
`17
`40
`79
`25
`60
`33
`9
`64
`36
`78
`14
`46
`76
`39
`69
`80
`43
`15
`48
`19
`35
`28
`53
`10
`71
`7
`38
`20
`54
`27
`51
`4
`24
`6
`13
`21
`77
`44
`29
`
`18
`20
`43
`3
`28
`63
`36
`12
`67
`39
`2
`17
`49
`79
`42
`72
`4
`46
`18
`51
`22
`38
`31
`56
`13
`74
`10
`41
`23
`57
`30
`54
`7
`27
`9
`16
`24
`80
`47
`32
`
`21
`23
`46
`6
`31
`66
`39
`15
`70
`42
`5
`20
`52
`3
`45
`75
`7
`49
`21
`54
`25
`41
`34
`59
`16
`77
`13
`44
`26
`60
`33
`57
`10
`30
`12
`19
`27
`4
`50
`35
`
`24
`26
`49
`9
`34
`69
`42
`18
`73
`45
`8
`23
`55
`6
`48
`78
`10
`52
`24
`57
`28
`44
`37
`62
`19
`80
`16
`47
`29
`63
`36
`60
`13
`33
`15
`22
`30
`7
`53
`38
`
`27
`29
`52
`12
`37
`72
`45
`21
`76
`48
`11
`26
`58
`9
`51
`2
`13
`55
`27
`60
`31
`47
`40
`65
`22
`4
`19
`50
`32
`66
`39
`63
`16
`36
`18
`25
`33
`10
`56
`41
`
`30
`32
`55
`15
`40
`75
`48
`24
`79
`51
`14
`29
`61
`12
`54
`5
`16
`58
`30
`63
`34
`50
`43
`68
`25
`7
`22
`53
`35
`69
`42
`66
`19
`39
`21
`28
`36
`13
`59
`44
`
`33
`35
`58
`18
`43
`78
`51
`27
`3
`54
`17
`32
`64
`15
`57
`8
`19
`61
`33
`66
`37
`53
`46
`71
`28
`10
`25
`56
`38
`72
`45
`69
`22
`42
`24
`31
`39
`16
`62
`47
`
`36
`38
`61
`21
`46
`2
`54
`30
`6
`57
`20
`35
`67
`18
`60
`11
`22
`64
`36
`69
`40
`56
`49
`74
`31
`13
`28
`59
`41
`75
`48
`72
`25
`45
`27
`34
`42
`19
`65
`50
`
`260
`
`Copyright© 1999 IEEE. All rights reserved.
`
`
`
`MEDIUM ACCESS CONTROL (MAC) AND PHYSICAL (PHY) SPECIFICATIONS
`
`ANSI/IEEE Std 802.11, 1999 Edition
`
`Table B.1-Hopping sequence set 1 (continued)
`
`index
`40
`41
`42
`43
`44
`45
`46
`47
`48
`49
`50
`51
`52
`53
`54
`55
`56
`57
`58
`59
`60
`61
`62
`63
`64
`65
`66
`67
`68
`69
`70
`71
`72
`73
`74
`75
`76
`77
`78
`79
`
`0
`27
`16
`59
`43
`76
`34
`72
`II
`60
`80
`47
`22
`75
`66
`41
`15
`35
`67
`52
`58
`44
`50
`17
`7
`19
`8
`69
`51
`42
`3
`30
`57
`37
`55
`26
`46
`53
`40
`32
`48
`
`3
`30
`19
`62
`46
`79
`37
`75
`14
`63
`4
`50
`25
`78