`
`Capella 2038
`Fujitsu v. Capella
`IPR2015-00726
`
`
`
`ENPU
`
`O a'~1‘—1l25'l(;~‘i
`Copyright and %eprint Permission: Abstracting ofitems in this volume is permitted with credit to the
`source. Authorization to photocopy items in this volume that carry a code at the bottom of the first
`page is granted by the Transducers Research Foundation, Inc. for internal or personal use, or the
`internal or personal use of specific clients, provided that the base fee of $3.00 is paid directly to the
`Copyright Clearance Center, 222 Rosewood Drive, Danvers MA 01923, USA.
`Instructors are
`permitted to photocopy isolated articles for educational classroom use without fee. For other forms
`of copying, reprint, or replication permission, write to the Transducers Research Foundation, lnc.,
`’ P-O. Box 18195, Cleveland Heights, Ohio 44118. All rights reserved. Copyright © 2004 by the
`Transducers Research Foundation, Inc.
`
`TRF Catalog Number 04-TRF—0001
`ISBN Number 0-9640024-5-0
`ISSN 1539-2058 (Print)
`IS SN 1539-204X (electronic)
`Library of Congress Number 2004105683
`
`-P‘
`
`Forest Hills Blvd, Cleveland, OH 44118. Please contact the Transducers Research Foundation for
`ordering information, or consult our website at ht_tp:gfwwwmansducer-research-foundation.org1
`Technical digests from previous workshops are also available.
`
`
`
`TECHNICAL PAPERS
`
`= r
`
`Solid-F~State Sensor,
`Actuator and
`
`"‘
`
`Microsystems
`Workshop
`
`2004
`
`Hilton Head Island, South Carolina
`June 6-10
`
`xxiii
`
`
`
`This material may be protected by Copyright law (Title 17 U.S. Code)
`
`
`
`
`
`urusovnlnoflod
`run-way
`— ‘I. Ieuahdawn
`infilc
`lnhltirflly
`Ililblo
`
`
`
`Figure 4. Cantral ofelectrostatic mirrors through snapdown using
`opticalfeedback on the angular position [15, 16].
`
`for low
`Another area of technology development critical
`insertion loss optical MEMS devices is the accurate control of
`mirror and etalon) curvature. Some of these efforts are widely
`available as improved tolerances and process yields from MEMS
`foundries (e.g., minors with >1 in radius of curvature,
`l0 - 100x
`improved over
`initial
`efforts}. Also, basic work on thermal
`dependence of mirror curvatures has also been conducted at public
`universities including the University of Minnesota [17].
`
`TECHNOLOGY RE-DEPLOYMENT: AN EXAMPLE
`
`The basic technology development will have far-ranging
`impact on applications that have nothing to do with optical fiber
`networks. One example of this re—use is an on-going research
`project at UCSD involving the modification of a telecom-derived
`MEMS device for free-space (mobile) communications.
`Fast, electrically-controlled optical
`fiber attenuators were
`needed
`for
`transient
`suppression
`in
`long-haul
`fiber
`communications. In 1996, a Bell Labs research project involved a
`novel MEMS wavefront modulator for this application [19]. A
`membrane reflector was fon-ned over a hexagonal array of cavities
`so that electrostatic force could deform the normally flat reflector
`
`into a shape like the surface of a golf ball. A collimated beam
`illuminating the modulator is efficiently tnupled into the output
`fiber, but when voltage is applied. a controlled fraction of light is
`aberrated away from the optical fiber core and discarded. The
`primary advantage of this device was that the mechanical response
`time was determined not by the overall optical aperture, but by the
`diameter of the individual membrane aperture.
`This
`attenuator was successfully demonstrated using a
`variation on MARS etalon optical modulator process [23, where a
`silicon nitride membrane is held over the silicon substrate by a
`
`phosphor-silicate glass sacrificial layer. The only process change
`needed was to coat a uniform layer of gold over the top of the
`device. This device concept was independently conceived and
`demonstrated at the University of Delft in 1999 [20].
`The new application of this device involved orner-cube
`retroreflectors (CCR), which are basically three mirrors are right
`angles to each other to fonn a hollow cube that faithfully reflects an
`incident optical beam towards it's point of origin. CCRS are used
`
`arc .lDSU's latching 2x2 switch, which is based on a SOI comb-
`drive actuator [l l] and DiCon 1x2 switch with variable attenuation,
`which is based on an analog electrostatic tilt mirror. The DiCon
`switch pictured in Figure 1 has an insertion loss of 0.8 dB,
`switches in under 5 ms, requires only 15 V drive, and is guaranteed
`to operate over 100 million cycles [12].
`Optical MEMS companies started during the boom have also
`survived to offer high-performance products to the slowly
`recovering component market. Beam-steering optical
`cross-
`connects based on two-dimensional arrays of analog tilt mirrors are
`available from Glirnmerglass, which provides an 64x64 switch, and
`Calient Networks, which makes up to 256x256 switches [13].
`Chromux offers 1x2 protection switch arrays, as well as scanning
`Fabry-Perot wavelength monitors.
`Another
`important class of optical MEMS components
`
`integrates diffraction gatings to perform spectral demultiplexing
`onto the MEMS device to enable wavelengthseiective filtering and
`switching. Dynamic spectral equalizers and wavelength-blocking
`switches are offered by LightConnect and Polychromix, while more
`general wavelength switching [4,
`14]
`is offered by Capella
`Photonics. Figure 3 shows a representative sample.
`
`
`
`Figure 3. Examples ofcurrently available telecom products.
`clockwise from upper left: Lt'gh!Connect variable attenuator and
`dynamic gain equalizer. Glimmerglass 64x64‘ switch. Capella
`Phoronics wavelength selective switch. Polycltromix wavelength
`
`blocker, Chromto: protection switch array and wavelength monitor
`
`OPTICAL MEMS DEVICE PROGRES S
`
`These basic functions have been demonstrated with various
`
`device structures, some of which were never publicized and which
`remain ‘trade secrets’ of technology holding companies. Device
`packaging and processing techniques are particularly diffictilt to
`obtain. However, some of the device technology has since been
`published in the open literature.
`One good example is
`the feedback position control of
`electrostatic
`tilt mirrors used by Tellium in their modular
`crossconnect system [15]. Normally such mirrors are operated in a
`safe region, roughly half the full angular range, to avoid catastrophic
`snapdown as the voltage required to maintain a given angle quickly
`decreases. Tellium used a nonlinear controller with a novel
`
`technique for torque-to-voltage conversion [16] in combination
`with classic linear controller techniques with optical
`full-state
`feedback, state estimator, and reference input with fe-ed~forward.
`They
`achieved stable angular positioning accuracy of €120
`microradians over the full +;’- 8° mechanical range of the mirrors,
`right up to the point of edge touchdown (Figure 4).
`
`
`
`for example in a
`signals, as
`to self-align free-space optical
`surveyor‘s rangefinder. A retro modulator, a retroreflector with an
`
`electrically-controlled reflectivity, can communicate data signals
`back to a laser source without needing to align a separate laser
`transmitter at the remote node.
`
`Retro modulators can block the beam (amplitude modulation),
`but it is equally effective to phase—modt1late the back—propagating
`wavefront so that the return signal is dispersed and does not arrive
`at the remote detector. A MEMS retro modulator demonstrated by
`UC Berkeley [18] for their ‘Smart Dust“ project used two fixed
`micro-mirrors assembled over a tilting MEMS mirror, so that the
`CCR angle could be switched away from 90°. The resulting device
`had a 1 mm aperture and a 2 kHz response. However, our goal was
`fabricate a retro modulator with a substantially larger aperture (10
`to
`25 mm)
`suitable
`for
`long-range
`{multi-km)
`optical
`communications, and operate the device at much higher speeds
`(>100 KHZ) than possible moving a single large mirror. The Bell
`Labs attenuator device was ideal for this application.
`
`
`
`Figure 5. Simulation (top) and experimental re.ttn'tsfi'om the
`membrane nrodalator usedforfree-space optical communications.
`
`A theoretical calculation of the wavefront propagating from a
`membrane modulator with 1 mm pixels with a 100 cm radius of
`curvature is shown at the top of Figure 5 More than 20 dB
`contrast
`is achieved over a wide range of angles, distances, and
`operating wavelengths.
`'lhe lower three images are preliminary
`experimental
`results from a fabricated device. They show the
`optical far—fie1d signal reflected from an undeflectetl modulator, the
`surface profile from the actuated device, and the dispersed signal
`reflected from the actuated modulator.
`
`CONCLUSION
`
`The telecom boom yielded a wealth of optical MEMS
`technology which, in addition to serving it’s original purpose of
`telecom components,
`is available for new applications in sensing
`and communications. The next wave of research and development-
`hopefully less turbulent than the last — has already begun.
`
`ACKNOWLEDGEMENTS
`
`Research
`
`at UCSD's
`conducted
`supported by a grant
`Integration Laboratory is
`Corporation. The experimental results shown are
`graduate student researcher Trevor Chan.
`
`Photonics
`
`Systems
`from Cubic
`the work of
`
`REFERENCES
`
`1. P. Van Kessel et al, “A MEMSbased projection display," IEEE
`Proceedings 86(8), pp. 16811-1704 (1998).
`
`2. I(.W. Goossen, J. A. Walker, S. C. Arney, “Silicon modulator
`based on mechanically-active anti—reflection layer with l tnbitlsec
`capability for
`fiber-in-the-loop applications," IEEE Plroronics
`Technology Letters 6(9), pp. 1119 — 1 E21 (1994).
`
`3. M. Wu, E. Vail, G. Li, and C. Chang-I-Iasnain, Widely and
`continuously tunable micromachined resonant cavity detector with
`wavelength tracking" IEEE Pilot. Tech. Lett,, 8 pp .98— 100 (1996).
`4. L. Lin. E. Goldstein, R. Tkach, “Free-space micromachined
`optical switches with sub-ms switching time for large-scale optical
`crossconnects,“ IEEE Pltot. Tech. Letters l0 pp. 525-52? (1998).
`
`4. J. Ford, J. Walker, “Dynamic spectral power equalization using
`micro-opto-mechanics,” IEEE Plrot. Tech. Lett. l0(l0), (1998).
`
`S. J. Ford et al, “Micrornechanical fiber-optic attenuator with 3
`microsecond response," IEEE J. Ltghtwave Tech. 16(9), (1998).
`
`6. P. Tayebati, P. Wang, D. Vakhshoori, and R. Sacks, “Widely
`tunable Fabry -Perot filter using Ga(Al)AsiAlOx deformable
`mirrors" Optical Society ofAmerica Conference on Optical Fiber
`Communications I998, pp. 22-2? (1998).
`
`7. J. Ford, J. Walker, V. Aksyuk and D. Bishop, “Wavelength
`add./drop switching using tilting micromirt'ors,” IEEE J. Ligltrwave
`Tech. 17(5), pp. 904-91 1, (1999).
`
`S. C. Marxer and N. de Rooij, “Micro-opto-mech. 2 x 2 switch for
`single-mode fibers based on plasn1a—etched silicon nirror and
`electrostatic actuation” J. Lightwave Tech. 1 7(1), pp. 2-6, (1999).
`
`“Scalable optical crosswconnect switch using
`9. P. Hagelin et al,
`micromachined mirrors," IEEE Phot. Teen. Lett. 12(?}, pp. 882-884
`(2000).
`
`I0. D. T. Neilson et al, “Fully provisioned l12><il2 micro-
`rnechanical optical crossconnect with 35.8 This demonstrated
`capacity," OSA Conference on Optical Fiber Communications
`2000, postdeadline paper pp. 202 — 204, (2000).
`
`1 1. B. Hichwa et al, “A Unique Latching 2x2 MEMS Fiber Optics
`Switch lEEE International Conf on Optical MEMS, (2000).
`
`12. DiCon Fiber Optics product datasheet,
`httptllwww.diconfibetoptics.corrtlQ1'oducts/sctl006 liindeichtm
`
`13. J. Xuezhe et al. “Three-dimensional MEMS photonic cross-
`connect switch design and performance,“ 1EEEJottrnai ofSelected
`Topics in Quantum Electronics, 9(2), pp. 5"ll~5'l8 (2003).
`
`14. D. Marorn et al, “Wave1engt1'i-selective 1x4 switch for 128
`WDM channels at 50 GH2 spacing,” Optical Society of/lmerico
`Conference on Optical Fiber Communications, Paper FB7, 2002
`
`15. J. Dadap et a1, “Modular MEMSbased optical cross-connect
`with large port-count,“ IEEE Photonics Technology Letters,
`lS(12), pp. 1773 — 1775 (2003)..
`
`16. I. Brener et a1, “Nonlinear servo control of MEMS mirrors and
`their performance in a large port-count optical switch." OSA
`Conference on Optical Fiber Communications pp. 383-387 (2003).
`
`17. K. Cao, W. Liu and J. Talghader, “Curvature compensation in
`micromirrors with high-reflectivity optical coatings," Journal of
`MEMS 10(3), pp. 409 — 41? (2001).
`18. L. Zhou et al, "Corner-cube retroreflectors based on structure-
`assisted assembly for l°ree~space optical communication, “ IEEE J.
`MEMS 12(3), pp. 233-242, 2003.
`
`19. J. Ford and J. Walker, “Technique for modulating optical
`signals in optical communications.“ United States Patent number
`$396,880, filed November 1996.
`
`20. S. Sakarya, G. Vdovin and P. Satro, “Micromachined SLM
`based on pixelated reflective membranes”, SPIE Proc. 3760,
`November 1999.