`
`UNITED STATES PATENT AND TRADEMARK OFFICE
`
`BEFORE THE PATENT TRIAL AND APPEAL BOARD
`
`Owens Coming,
`Petitioner
`
`go
`
`CertainTeed Corporation,
`Patent Owner
`
`Patent No. 8,959,876
`Issued: February 24, 2015
`Filed: June 18, 2014
`Husnu M. Kalkanoglu and Stephen A. Koch
`
`Inventors:
`
`Title: SHINGLE WITH REINFORCEMENT LAYER
`
`Inter Partes Review No. 2015-01161
`
`PETITION FOR INTER PARTES REVIEW
`
`FAST FELT 2033, pg. 1
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`TABLE OF CONTENTS
`
`II.
`III.
`
`2.
`
`Compliance with Requirements of an Inter Partes Review Petition .............. 1
`A. Certification that the Patent May Be Contested via Inter
`Partes Review by the Petitioner ............................................................ 1
`Fee for Inter Partes Review (§ 42.15(a)) ............................................... 2
`B.
`C. Mandatory Notices (37 CFR § 42.8(b)) ................................................ 2
`1.
`Real Party in Interest (§ 42.8(b)(1)) ............................................ 2
`2.
`Other Proceedings (§ 42.8(b)(2)) ................................................ 2
`3.
`Lead and Backup Lead Counsel (§ 42.8(b)(3)) .......................... 3
`4.
`Service on Petitioner ................................................................... 3
`D. Proof of Service (§§ 42.6(e) and 42.105(a)) ......................................... 3
`Identification of Claims Being Challenged (§ 42.104(b)) ............................... 3
`Relevant Information Concerning the ’876 Patent .......................................... 4
`Background of the Technology ............................................................. 4
`A.
`1. The Basic Asphalt Shingle Coated on Both Sides with
`Asphalt and Granules and Applied to a Roof in Courses
`Had Been Known for Decades .................................................... 4
`The Prior Art Disclosed a Generally Longitudinal
`Second Thickness Layer For Reinforcement in the
`Nailing Zone ............................................................................... 7
`3. The Prior Art Taught Thin Reinforcement Material ................. 11
`Laminated Shingles Including Multiple Reinforcement
`4.
`Layers Were Known ................................................................. 12
`B. General Overview Of The ’876 Patent ................................................ 14
`The ’876 Patent Recognizes the Basic Asphalt Shingle
`1.
`Was Known ............................................................................... 14
`2. Only a Reinforcement Layer Adhered to the Rear
`Surface Of the Shingle Is Disclosed in the ’876 Patent ............ 15
`The Reinforcement Layer Is "Adhered" to the
`Surface Of the Shingle in All the Claims ................................. 17
`Prosecution History and Effective Filing Date of the ’876 Patent ...... 17
`1. Prosecution of the ’876 Patent .................................................. 17
`Prosecution of Related Patent Applications .............................. 19
`2.
`a. U.S. Appl. No. 10/871,911 ............................................. 19
`
`3.
`
`C.
`
`FAST FELT 2033, pg. 2
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`IV.
`
`6.
`
`7.
`8.
`9.
`
`b. U.S. Appl. No. 12/857,868 ............................................. 20
`3. Effective Filing Date of the Claims .......................................... 23
`D. Person of Ordinary Skill in the Art ..................................................... 23
`Construction of Terms Used in the Claims ......................................... 23
`E.
`1.
`Elements (a)-(d) of Claim 1 ..................................................... 24
`"shingle" .................................................................................... 24
`2.
`"adhered to an exterior surface of said shingle" ....................... 27
`3.
`"substantially thinner" .............................................................. 30
`4.
`Precise Reasons for Relief Requested ........................................................... 31
`A. Venrick 1939 (Ex. 1013) in View of Frankoski 1998 (Ex. 1010)
`Renders Obvious Claims 1-22 ............................................................. 32
`1.
`Venrick In View Of Frankoski Renders Obvious Claim 1 ....... 33
`2.
`Venrick In View Of Frankoski Renders Obvious Claim 10 ..... 40
`3.
`Venrick In View Of Frankoski Renders Obvious Claim 16 ..... 41
`4.
`Venrick In View of Frankoski Renders Obvious Claim 22 ...... 41
`5.
`Venrick In View Of Frankoski Renders Obvious Claims
`6 and 11 ..................................................................................... 41
`Venrick In View Of Frankoski Renders Obvious Claim 7 and
`14 ............................................................................................... 42
`Venrick In View Of Frankoski Renders Obvious Claim 17 ..... 43
`Venrick In View Of Frankoski Renders Obvious Claim 20 ..... 44
`Venrick In View Of Frankoski Renders Obvious Claims 8
`and 21 ........................................................................................ 44
`10. Venrick In View Of Frankoski Renders Obvious Claims 2,
`5, 13 and 18 ............................................................................... 45
`11. Venrick In View Of Frankoski Renders Obvious Claims 3,
`4, 12, and 19 .............................................................................. 46
`12. Venrick In View Of Frankoski Renders Obvious Claims 9
`and 15 ........................................................................................ 46
`Venrick 1939 (Ex. 1013) in View of Kiik 2001 (Ex. 1018)
`Renders Obvious Claims 1-22 ............................................................. 47
`Venrick In View Of Kiik Renders Obvious Claim 1 ................ 47
`Venrick In View Of Kiik Renders Obvious Claim 10 .............. 51
`Venrick In View of Kiik Renders Obvious Claim 16 ............... 52
`Venrick In View of Kiik Renders Obvious Claim 22 ............... 52
`
`B.
`
`2.
`3.
`4.
`
`ii
`
`FAST FELT 2033, pg. 3
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`5.
`
`6.
`
`Venrick In View Of Kiik Renders Obvious Claims 6
`and 11 ........................................................................................ 53
`Venrick In View Of Kiik Renders Obvious Claims 7
`and 14 ........................................................................................ 53
`Venrick In View Of Kiik Renders Obvious Claim 17 .............. 54
`Venrick In View Of Kiik Renders Obvious Claim 20 .............. 55
`Venrick In View Of Kiik Renders Obvious Claims 8
`and 21 ........................................................................................ 56
`10. Venrick In View Of Kiik Renders Obvious Claims 2,
`5, 13, and 18 .............................................................................. 56
`11. Venrick In View Of Kiik Renders Obvious Claims 3,
`4, 12, and 19 .............................................................................. 57
`12. Venrick In View Of Kiik Renders Obvious Claims
`9 and 15 ..................................................................................... 58
`C. Secondary Considerations Do Not Favor Nonobviousness ................ 58
`CONCLUSION .............................................................................................. 60
`
`7.
`8.
`9.
`
`go
`
`Attachment A. Proof of Service of the Petition
`
`Attachment B. List of Evidence and Exhibits Relied Upon in Petition
`
`iii
`
`FAST FELT 2033, pg. 4
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`I.
`
`Compliance with Requirements of an Inter Partes Review Petition
`
`A.
`
`Certification that the Patent May Be Contested via Inter Partes
`Review by the Petitioner
`
`Petitioner certifies it is not barred or estopped from requesting interpartes
`
`review of U.S. Patent No. 8,959,876 ("the ’876 patent") (Ex. 1050). Neither
`
`Petitioner, nor any party in privity with Petitioner: (i) has filed a civil action
`
`challenging the validity of any claim of the ’876 patent; or (ii) has been served a
`
`complaint alleging infringement of the ’876 patent more than one year prior to the
`
`present date. Also, the ’876 patent has not been the subject of a prior interpartes
`
`review or a finally concluded district court litigation involving Petitioner.
`
`Petitioner notes that the timing provisions of 35 U.S.C. § 311 (c) and 37
`
`C.F.R. § 42.102(a) do not apply to the ’876 patent, as its effective filing date pre-
`
`dates the first-to-file system. See Pub. L. 112-274 § l(n), 126 Stat. 2456 (Jan. 14,
`
`2013). Furthermore, as discussed below, Patent Owner’s submission of additional
`
`information prior to the Examiner’s issuance of the Notice of Allowance for the
`
`’876 patent does not preclude institution pursuant to 35 U.S.C. § 325(d). There is
`
`no evidence the Examiner gave due consideration to the information that was
`
`submitted, Petitioner’s arguments have merit, and Petitioner was unable to make
`
`these arguments during prosecution. See SK Innovation Co., Ltd. v. Celgard, LLC,
`
`IPR2014-00680, Paper No. 1 l(Sept. 29, 2014) at 22; Conopco, Inc. v. The Procter
`
`& Gamble Co., IPR No. 2013-00505, Paper No. 9 (Feb. 12, 2014) at 6.
`
`FAST FELT 2033, pg. 5
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`B. Fee for Inter Partes Review (§ 42.15(a))
`
`The Director is authorized to charge Deposit Account No. 50-1597.
`
`Mandatory Notices (37 CFR § 42.8(b))
`
`1. Real Party in Interest (§ 42.8(b)(1))
`
`The real party in interest is Owens Coming, located at One Owens Coming
`
`Parkway, Toledo, OH 43659.
`
`2. Other Proceedings (§ 42.8(b)(2))
`
`The ’876 patent is not subject to any litigation, but patents related to the ’876
`
`patent are the subject of litigation in the District of Delaware (Civ. A. No. I:14-cv-
`
`00510-SLR), which names Owens Coming as defendant. See Ex. 1045
`
`(Complaint). These same related patents, of which the ’876 patent is related by
`
`continuation, are also the subject of petitions for interpartes review filed on
`
`August 29, 2014 (IPR Nos. 2014-01397, -01401, -01402, -01403, -01404). On
`
`March 9, 2015, the Board correctly instituted trial on all of the challenged claims
`
`in each of these proceedings based on the Venrick, Frankoski, and Kiik references,
`
`which are the subject of the instant petition. Additional patents related to the ’876
`
`patent are also the subject of interpartes review proceedings, IPR Nos. 2015-
`
`01159 and 2015-01160, which are filed concurrently with the instant petition.
`
`The subject matter of the ’876 patent is substantially identical to the subject
`
`matter of the claims on which the Board has already instituted interpartes review.
`
`Therefore, interpartes review should be instituted for the ’876 patent, as explained
`
`2
`
`FAST FELT 2033, pg. 6
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`in detail below.
`
`o
`
`Lead and Backup Lead Counsel (§ 42.8(b)(3))
`
`Lead Counsel
`Jeffrey P. Kushan
`Reg. No. 43,401
`j kushan~sidley.com
`(202) 736-8914
`
`Backup Lead Counsel
`Peter S. Choi
`Reg. No. 54,033
`peter.choi(~sidley.com
`(202) 736-8076
`
`4. Service on Petitioner
`
`Service on Petitioner may be made by mail or hand delivery to: Sidley
`
`Austin LLP, 1501 K Street, N.W., Washington, D.C. 20005. The fax number for
`
`Petitioner’s counsel is (202) 736-8711.
`
`D.
`
`Proof of Service (§§ 42.6(e) and 42.105(a))
`
`Proof of service of this petition is provided in Attachment A.
`
`II.
`
`Identification of Claims Being Challenged (§ 42.104(b))
`
`Claims 1-22 of the ’876 patent are unpatentable. Specifically:
`
`(1) Claims 1-22 would have been obvious under 35 U.S.C. § 103 based
`
`on U.S. Patent No. 2,161,440 to Venrick (.Venrick) (Ex. 1013) in view
`
`of U.S. Patent No. 5,822,943 to Frankoski (Frankoski) (Ex. 1010).
`
`(2) Claims 1-22 would have been obvious under 35 U.S.C. § 103 based
`
`on Venrick in view of U.S. Patent Publ. No. 2001/0055680 to Kiik
`
`(Kiik) (Ex. 1018).
`
`Petitioner’s proposed claim construction, the evidence relied upon, and the
`
`precise reasons why the claims are unpatentable are provided below. A list of
`
`3
`
`FAST FELT 2033, pg. 7
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`evidence relied upon in support of this petition is set forth in Attachment B.
`
`III. Relevant Information Concerning the ’876 Patent
`
`A.
`
`Background of the Technology
`
`1.
`
`The Basic Asphalt Shingle Coated on Both Sides with
`Asphalt and Granules and Applied to a Roof in Courses
`Had Been Known for Decades
`
`Asphalt shingles have been used to cover roofs since the late-1800s. See,
`
`e.g., Ex. 1005, Cash, "Asphalt Roofing Shingles," Proc. 11t5 Conf. Roofing Tech.
`
`(1995) (Cash), at 1; Declaration of Mike Bryson, Ex. 1003 at ¶ 43. By the mid-
`
`1990s, three styles predominated: (1) the individual shingle; (2) the strip shingle
`
`(with or without tabs), and (3) the laminated shingle (with or without tabs). Ex.
`
`1005 (Cash), at Figs. 10-12; Ex. 1003 at ¶ 43.
`
`Asphalt is applied to waterproof the shingle. Ex. 1007, Noone, "Asphalt
`
`Shingles - A Century of Success and Improvement," Proc. 11t5 Conf. Roofing
`
`Tech. (1993) (Noone 1993), at 2; Ex. 1003 at ¶ 46. In general, making an asphalt
`
`shingle involves passing a base mat through a coater, where layers of hot asphalt
`
`are applied to the top and back surfaces. Ex. 1007 at 2; Ex. 1003 at ¶ 46. Colored
`
`or non-colored granules are then dropped on the front surface and other granular
`
`materials are applied to the back. Ex. 1007 at 2, 5; Ex. 1003 at ¶ 46. The granular
`
`material on the front adds color and texture while finely ground talc and sand or
`
`other granular materials on the back prevent sticking during storage and shipment.
`
`4
`
`FAST FELT 2033, pg. 8
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`Ex. 1007 at 2, 5-6; Ex. 1003 at 1 46.
`
`The basic steps for making an asphalt shingle, including coating both sides
`
`of the base mat (i. e., substrate) with asphalt and then applying granular material on
`
`both sides, have remained the same for decades. Ex. 1003 at 11 46-51. U.S.
`
`Patent No. 2,099,131 (issued in 1937) (.Miller 1937) (Ex. 1008) states:
`
`It has heretofore been common practice to manufacture prepared
`
`roofing by saturating a suitable absorbent fabric, such as roofing felt,
`
`with a liquid bituminous material, e.g., asphalt, coating botl~ sides of
`
`the saturated fabric with a bituminous material, surfacing tlte
`
`bituminous coating on one side of tlte fabric witlt mineral grit, such
`
`as crushed slate, and applFing mica, soapstone, or otlter anti-stick
`
`material to tlte coating on tlte otlter side of tlte fabric.
`
`!d. at 4, col. 1:13-24 (emphases added); Ex. 1003 at 1 48.
`
`A typical strip shingle includes a plurality of tabs (i. e., flaps) of uniform or
`
`varying dimensions that extend downwardly from a headlap area. Ex. 1003 at 11
`
`44-45, 54-55. Each asphalt shingle has a nailing or fastening zone for attachment
`
`to a roof. !d. The 1997 edition of the ARMA Residential Roofing Manual
`
`(ARMA Manual) (Ex. 1009), at 33, Fig. 10 (below), shows the nailing zone
`
`typically is located just above the tabs in the headlap area. Also shown is the
`
`generally longitudinal dimensions of the typical strip shingle, i.e., 36"x 12". Ex.
`
`1003 at 11 54-56; see also id. at 11 52-53.
`
`FAST FELT 2033, pg. 9
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`As shown, the nailing zone is (a) generally longitudinal, (b) located between
`
`the right and left edges, and (c) intermediate of the upper and lower edges. Id. at
`
`¶ 56.
`
`The preamble of claim 1 of the ’876 patent provides: ’°[a]n array of shingles
`
`applied to a roof, by fasteners, in courses, each shingle having front and rear
`
`exterior surfaces and being comprised of shingle material, with the shingle having
`
`a wi[d]th defined by upper and lower edges and a length defined by right and left
`
`edges." Ex. 1050 at 7:35-39. Elements (a)-(d) of claim 1 require the following:
`
`(a) a base layer of mat having front and rear surfaces;
`
`(b) a coating of asphaltic material on both front and rear surfaces of
`
`the mat;
`
`(c) coatings of granular material on said both front and rear surfaces
`
`of the mat, which, together with said base layer of mat and said
`
`coating of asphaltic material comprise a first thickness layer;
`
`(d) a longitudinal fastening zone between right and left shingle edges,
`
`generally intermediate said upper and lower edges[.]
`
`Id. at col. 7:40-49. These elements and the preamble describe nothing more than
`
`the basic asphalt shingle applied to a roof in a convention manner. Ex. 1003 at ¶¶
`
`6
`
`FAST FELT 2033, pg. 10
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`57-60. The ’876 patent acknowledges that the "basic" asphalt shingle was known
`
`in the prior art. Ex. 1050 at col. 3:17-20; Ex. 1003 at ¶1 61-62. Fastening this
`
`basic asphalt shingle to a roof in overlapping layers known as "courses" in the
`
`industry--using fasteners has been "common practice" since at least the 1930s.
`
`Ex. 1003 at 11 45, 58.
`
`To the basic asphalt shingle, element (e) of claim 1 of the ’876 patent adds
`
`and describes a "reinforcement second thickness layer":
`
`(e) and an at least partially externally visible generally longitudinal
`
`reinforcement second thickness layer of a substantially thinner
`
`dimension than said first thickness layer; said reinforcement second
`
`thickness layer being adhered to an exterior surface of said shingle,
`
`being at least partially within said fastening zone and being at least
`
`substantially between right and left edges of the shingle.
`
`Ex. 1050 at col. 7:45-57; see also id. at col. 3:29-31 ("the shingle 20 is similar to
`
`that of the [prior art] shingle 10 of FIG. 1, but with a reinforcement layer").
`
`Reinforcement layers having the claimed features were known in the prior art. Ex.
`
`1003 at 11 79-80; see id. at § II.C.3.
`
`2.
`
`The Prior Art Disclosed a Generally Longitudinal Second
`Thickness Layer For Reinforcement in the Nailing Zone
`
`U.S. Patent No. 2,161,440 to Venrick (Venrick) describes a "reinforcing
`
`strip" for "strengthening" to "reduce... tear," and to "provide a reinl~orced area
`
`for nailing the shingle to the roof." Ex. 1013 (Venrick.), at 3, col. 1:40-46
`
`7
`
`FAST FELT 2033, pg. 11
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`(emphasis added); Ex. 1003 at ¶ 84.
`
`Although the Venrick strip, which may be made of, inter alia, felt, metal, or
`
`"layers of roofing tape," Ex. 1013 at 4, col. 2:74-75, can serve an aesthetic
`
`purpose, a distinct purpose for the strip is to add "rigidity" to the shingle to
`
`"rigidity" to "resist[] the action of the wind." Id. at 5, col. 11-9; at 3, col. 1:40-46
`
`("reinforced area for nailing" "[a]nother object"); Ex. 1003 at ¶ 85. "[I]mproved
`
`resistance to failure upon bending" is a function of the reinforcement layer in the
`
`’876 patent. Ex. 1050 at col. 6:32-33; Ex. 1003 at ¶ 85. The reinforcing strip of
`
`Venrick is shown in Fig. 1 as 15 on the front surface of a shingle.
`
`! T ~+..:,.,:~:: ..]1...:: ~::, ; .:I !;::.. ~~.
`.I~
`
`Venrick teaches that the reinforcement strip can also be on the
`
`"undersurface," or rear surface of the shingle. Ex. 1013 at 4, col. 2:60-63, Figs. 8-
`
`14; Ex. 1003 at ~ 86-87. The strip is preferably "cemented" onto the granule
`
`surfacing, and overlaps with the nailing zone to "give greater nailing strength."
`
`gx. 1013 at4, col. 1:32-37, col. 2:11-23; Ex. 1003 at~ 87.
`
`Figs. 8 and 9 of Venrick show the reinforcement strip 45 as a visible
`
`component that is adhered to the exterior rear surface. Ex. 1003 at ~ 88. It extends
`
`at least partially into the zone having nailing holes 47, and it also extends lower
`
`FAST FELT 2033, pg. 12
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`than the nailing zone (i. e., into the tab portion toward the lower edge of the
`
`shingle), as shown by the hashed lines. Id.
`
`It also extends toward the upper edge
`
`into the lower end of the headlap area. !d.
`
`It clearly forms a second thickness
`
`layer. !d.
`
`The strip is also generally longitudinal as would be expected given that
`
`shingles are generally longitudinal. !d.
`
`: ~ ¯ )z, "
`
`It was known long before the priority date of the ’876 patent that nailing
`
`through multiple layers of shingle material provided strength and contributed to
`
`roofing integrity. Id. at ¶ 89. E.g., U.S. Patent No. 6,145,265 (Ex. 1011), at col.
`
`1:60-62 ("[N]ailing through a double layer of material provides strength, which is
`
`essential for roofing integrity in windy conditions."). Because the nailing zone
`
`was generally longitudinal, see Ex. 1009 (ARMA Manual 1997), at 33, Fig. 10, it
`
`would only make sense to make the reinforcement layer generally longitudinal
`
`while extending it at least partially into the nailing zone. Ex. 1003 at ¶ 89. This is
`
`what Venrick teaches. Ex. 1013 at 5, col. 1:50-54 ("The shingles are nailed
`
`preferably.., where the raised median strip is."); see also id. at 5, col. 1:1-3 ("the
`
`strip ... extends longitudinally thereof’).
`
`Examples of reinforcing layers affixed to the rear surface abound. U.S.
`
`9
`
`FAST FELT 2033, pg. 13
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`Patent No. 4,875,321 (Rohner) (Ex. 1015) discloses a "backing strip" (Fig. 2, 25)
`
`that can be made of "light-weight weather-resistant material" to "provide[] a stiffer
`
`shingle which grips the nails .... " Id. at col. 1:55-59, 2:30-32; Ex. 1003 at ¶ 94.
`
`Fig. 2 exemplifies a shingle with a reinforcing backing layer 25. Ex. 1003 at ¶ 94.
`
`Showing an array of shingles, Fig. 3 confirms that the rear facing reinforcing layer
`
`25 extends at least partially into the nailing zone 37. Ex. 1015 (Rohner.); Ex. 1003
`
`at ¶ 95. The Rohner "backing strip" forms a second thickness layer on the rear,
`
`and is longitudinal like the shingle itself. Ex. 1003 at ¶ 95.
`
`Rohner 1989~ l:ig. 2
`
`Rohner 1989~ lrig. 3
`
`FIG.
`
`FIG. ~.
`
`Similarly, U.S. Patent No. 5,860,263 (Sieling) (Ex. 1016) shows a
`
`"reinforcement" strip 60 affixed to the back portion of an asphalt shingle. Id. at ¶
`
`96. Sieling describes the reinforcing strip as having dimensions which would have
`
`been understood to fall within the nailing zone. Ex. 1016 at col. 3:23-28; Ex. 1003
`
`at ¶ 97. The reinforcing strip in Sieling is on the exterior surface, forms a second
`
`thickness layer, and is longitudinal in orientation. Ex. 1003 at ¶ 97; see id. at §§
`
`II.C.3.-II.C.3.a., V.E.
`
`10
`
`FAST FELT 2033, pg. 14
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`FIG.5
`
`~ 57
`
`54/ ’5~j
`
`55 y
`
`3. The Prior Art Taught Thin Reinforcement Material
`
`Venrick, Rohner~ and Sieling show the concept of using a reinforcing layer
`
`on the back of a shingle was not new. Id. at ¶1 84-89, 94-97; see id. at § II.C.3.a.
`
`Nor was the concept of using thin material for reinforcement. Id.; see id. at
`
`§§ II.C.3.b.-II.C.3.c.
`
`U.S. Patent No. 3,813,280 (Olszyk) (Ex. 1014) shows a web layer 16 affixed
`
`to the back of an asphalt shingle. Id. at 11 90-91.
`
`A purpose of the web layer is "adding reinforcement ... and providing
`
`additional tear strength." Ex. 1014 at col. 4:17-27 (emphases added); Ex. 1003 at
`
`1 91. The thickness of the web is on the order of 1/1000th of an inch. Ex. 1014 at
`
`col. 3:59-60 ("a thickness of between about 10 mils or less to about 30 mils"); Ex.
`
`1003 at 11 92-93; see also id. at § V.B.
`
`U.S. Patent Publ. No. 2001/0055680 (Kiik) (Ex. 1018) discloses an asphalt
`
`roof shingle having a "backing material" that can be made of woven polyester and
`
`11
`
`FAST FELT 2033, pg. 15
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`latex fiber bound by latex. Id. at [0004], [0006]; Ex. 1003 at ¶1 100-101. The
`
`exemplary materials have a thickness of 13-23 1/1000t~ of an inch. Ex. 1018 at
`
`Table I; Ex. 1003 at I 101. Data in Kiik show the reinforced laminated shingles
`
`exhibited improved tear strength and nail pull strength. Ex. 1018 at Tables I, II;
`
`Ex. 1003 at I 104. Thus, Kiik showed thin material could be affixed to the back of
`
`an asphalt shingle to provide reinforcing properties. Ex. 1003 at 11 102-104.
`
`U.S. Patent No. 5,822,943 (Frankoski) (Ex. 1010) issued in 1998. Id. at 1
`
`63. The ’875 patent incorporates by reference Frankoski and says the "basic"
`
`asphalt shingle can be made according to the teachings ofFrankoski. Ex. 1048 at
`
`col. 3:14-17; Ex. 1003 at 11 61-62. As discussed in detail below, Frankoski
`
`discloses a scrim a thin material, preferably 0.37 inches, made from any number
`
`of different fabric, synthetic, or composite materials--that serves to reinforce the
`
`shingle. Ex. 1010 at 3:24-36; Ex. 1003 at 11 69-70. Like Kiik, data in Frankoski
`
`evidences that scrim "provides a superior strength and nail pull-through resistance
`
`to withstand, for example, hurricane force winds." Ex. 1010 at col. 3:20-24, 5:64-
`
`8:63 (providing nail pull resistance, tensile strength, and tear resistance data); Ex.
`
`1003 at 11 70, 76.
`
`4.
`
`Laminated Shingles Including Multiple Reinforcement
`Layers Were Known
`
`As discussed above, Frankoski discloses a laminated shingle, exemplified by
`
`Figs. 1 and 2 of Frankoski. Ex. 1003 at 11 63-69, 109. A laminated shingle is a
`
`12
`
`FAST FELT 2033, pg. 16
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`shingle made of two layers that are glued together. !d.; see id. at ¶1 49-50, 59.
`
`Fig. 1 of Frankoski shows the shingle comprises an upper layer 5 and a lower layer
`
`7, which are glued together with a sealant 9. Id. at 1 64. The upper layer 5 has a
`
`headlap area 10 and a number of tabs 35. !d. The lower layer is generally
`
`longitudinal, and extends between the right and left edges. !d.
`
`It was widely known that gluing an extra shingle layer to the back surface of
`
`a single layer strip shingle, as in a laminated shingle, provided reinforcement
`
`properties by enabling a roofer to nail through two layers, rather than one layer, of
`
`material. !d. at 1 68. U.S. Patent No. 6,145,265 (Malarkey) (Ex. 1011) explains
`
`this common-sense principle, noting that "nailing through a double la~er o[
`
`materialprovidesstrength." Id. at col. 1:54-62 (emphasis added); Ex. 1003 at 1
`
`68. Laminated shingles, which were among the most popular shingles made and
`
`sold by the late 1990s and early 2000s, utilized a second thickness layer of material
`
`that was recognized to add reinforcement. Ex. 1003 at 1 68.
`
`Further, Fig. 2 of Frankoski (Ex. 1010) shows a scrim layer 60 in the
`
`laminated shingle that serves as a reinforcement layer that provides additional
`
`strength and support to the shingle. Id. at 11 69-70; see id. at 11 71-78; Ex. 1010 at
`
`13
`
`FAST FELT 2033, pg. 17
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`col. 3; 20-24, Fig. 2.
`
`Frankoski states that the scrim preferably extends the entire length of the
`
`shingle. Ex. 1010 at col. 5:27-28. This would be understood to mean the scrim is
`
`generally longitudinal given that most shingles were longer than they were wide.
`
`Ex. 1003 at ¶ 73. Frankoski states the scrim should "coincide with at least a
`
`portion of the nail zone." Ex. 1010 at col. 5:38-39; Ex. 1003 at ¶ 73.
`
`As discussed in § III.C.2., in related applications, Patent Owner
`
`distinguished the alleged invention over Frankoski by arguing the reinforcing layer
`
`is not "embedded" within the shingle as the scrim 60 is in Frankoski; instead it is
`
`affixed to the exterior, rear surface of the shingle. At the time these arguments
`
`were made, neither Venrick, Rohner, nor Sieling were before the Patent Office.
`
`See Ex. 1003 at §§ III.G.-III.H.
`
`B. General Overview Of The ’876 Patent
`
`The ’876 patent, entitled "Shingle With Reinforcement Layer," issued on
`
`February 24, 2015, to Kalkanoglu and Koch. Ex. 1050. See Ex. 1003 at § III.C.
`
`1.
`
`The ’876 Patent Recognizes the Basic Asphalt Shingle Was
`Known
`
`The ’876 patent acknowledges that the basic components of an asphalt
`
`14
`
`FAST FELT 2033, pg. 18
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`shingle are prior art. Ex. 1050 at col. 2:63-3:20. Referring to Fig. l, the ’876
`
`patent describes the "prior art shingle" as being made of a mat covered with
`
`asphalt on "each exposed surface" with "granular material" on the upper exposed
`
`surface to withstand weather and "smaller granules" on the "undersurface." Id. at
`
`col. 2:63-3:6. The ’876 patent states that the "basic" prior art shingle can be made
`
`by the methods disclosed in, among other references, Frankoski. Id. at col. 3:17-
`
`20; Ex. 1003 at ¶¶ 61-62.
`
`2.
`
`Only a Reinforcement Layer Adhered to the Rear Surface
`Of the Shingle Is Disclosed in the ’876 Patent
`
`The person of ordinary skill would understand that the reinforcement layer
`
`disclosed in the ’876 patent is affixed to the rear surface of the asphalt shingle, and
`
`nowhere else. Ex. 1003 at ¶¶ 134, 186; see also id. at § III.A.2.
`
`The specification states: the "present invention is directed toward providing
`
`a shingle, wherein, a separate, exterior reinforcement layer is provided outside the
`
`rear surface of the shingle .... " Ex. 1050 at col. 1:60-64 (emphases added); Ex.
`
`1003 at¶¶ 135, 186.
`
`The figures provided in the ’876 patent show the reinforcement layer to be
`
`located only on the rear surface of the shingle. Ex. 1003 at ¶ 186; see id. at
`
`§ III.A.2. Fig. 2 shows a prior art shingle with a "reinforcement laFer applied to
`
`the rear surface thereof, in accordance with the present invention." Ex. 1050 at
`
`col. 2:26-28 (emphases added); Ex. 1003 at ¶¶ 137-38, 186. Fig. 3 also shows the
`
`15
`
`FAST FELT 2033, pg. 19
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`reinforcement layer on the "rear surface." Ex. 1050 at col. 2:30-32; Ex. 1003 at ¶1
`
`139, 186.
`
`The specification consistently emphasizes location of the reinforcement
`
`layer on the "rear surface." See, e.g., Ex. 1050, at Figs. 4 and 4A (reinforcement
`
`layer 29 on rear surface of shingle); col. 1:60-62 ("reinforcement layer is provided
`
`outside tl~e rear surface"); col. 3:31-34 ("a reinforcement layer.., added on tl~e
`
`rear 21 of the shingle"); col. 4:25-27 ("the scrim 46 applied to tlte
`
`undersurface"); col. 6:31-7:28 (extolling performance of "scrim reinforcement
`
`embedded on tlteir rear sides," a "polyester mat reinforcement layer on tlteir rear
`
`surfaces," a heavier "reinforcement layer on tlte rear surface," "fiber glass scrim
`
`on tlte rear surface," and "reinforcement material that is applied to tlte rear")
`
`(emphases added); Ex. 1003 at 11 141,186.
`
`Moreover, the specification describes only one method for making the
`
`described shingle, and this method places the reinforcement layer on the rear
`
`surface; that is again described as being required for the "invention." Ex. 1050 at
`
`col. 4:8-15 ("[T]he reinforcement layers 29, 39 may... [be] either embedded in
`
`the asphaltic layer on tlte rear of the shingle or adltered to tlte rear of the
`
`shingle .... The reinforcement layer 29, 39, will be adltered to tlte rear surface
`
`21, 31 of the shingles ol~tltis invention, by means of any suitable adhesive .... "
`
`(emphases added)); Ex. 1003 at 11 142, 186. Placement on the rear is also
`
`16
`
`FAST FELT 2033, pg. 20
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,959,876
`
`described to be critical to performance. Id. ¶1 143-44, 186. For example, Figure 4
`
`illustrates that "the scrim 46 applied to the undersurl~ace ol~the shingle 41 will
`
`tend to resist upward bending of the shingle tab portion 44 .... " Ex. 1050 at col.
`
`4:25-27 (emphasis added); Ex. 1003 at 11 145,186.
`
`3.
`
`The Reinforcement Layer Is "Adhered" to the Surface Of
`the Shingle in All the Claims
`
`The specificatio