`
`Director Research and Integrated Technology, PIA/GATF: July 2005 to August 2006
`Managed the research department and restructured areas to create predictable and reliable programs
`and products. Areas of focus included process controls, research, product testing and lab services.
`
`Director of Integrated Technology, PIA/GATF: August 2004 to June 2005
`Successfully developed and launched the CIP4 JDF certification program. This continues to be the
`only world-wide program available and has since certified over 55 products.
`
`University of Wales Swansea: Multiple positions, including Research Assistant, Research
`Officer and Lecturer, November 1990 to July 2004
`Developed and delivered course modules for BSc and MSc in Printing and Coating Technology.
`Initiated, undertook and published fundamental research on lithographic, rotogravure and
`flexographic printing, coating and paper-ink interactions. This included experimental evaluation
`and numerical code development. Disseminated the research to over 200 companies and
`collaborated internationally.
`
`Academic qualifications
`
`1992 PhD Wales, Sizing of irregularly shaped particles by laser based techniques.
`1987 BSc Wales, Honors degree in Mechanical Engineering, Grade 2 (i)
`
`Professional associations
`
`The Colour Group (Great Britain), 1997-2004, TAGA since 1995, TAPPI since 1998.
`
`Positions of responsibility
`
`¯ CIP4: Board of Directors, Membership Officer, since 2015, Education and Marketing Officer
`2012-2014, Advisory Board since 2008, Technical Steering Committee since 2005, Chair/Vice
`Chair, Product Certification Working Group since 2005.
`¯ TAGA: Managing Director since 2006, Editorial Board Member of TAGA Journal of Graphic
`Technology 2004-2014, Advisor TAGA student chapter, 1997-2003.
`¯ Printing Industries of America Committees: Chair InterTech Technology Awards since
`2006, Research Committee since 2005, Supplier Advisory Committee since 2005.
`¯ Printing Industries of America Conferences: Planed / moderated 30 conferences since 2005.
`¯ Clean Air Act Advisory Committee since 2012.
`¯
`ISO TC130 committee: US representative since 2006, UK representative 1997-2004.
`¯ Canadian Printing Industries Sector Council: STRM Committee, 2008-2009.
`¯ Organizing Committee: 5 international conferences, 1989-2004.
`¯ Academic standards committee and industrial steering group: IGDS MSc, Colour
`Application Technology, 1997-2001.
`¯ The Colour Group (GB): Director, 1999 -2002.
`
`Dr. Mark Bohan: 17 November 2015
`
`FAST FELT 2004, pg. 50
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Appendix A
`
`Dr. Mark Bohan
`Career development document
`
`Contents
`
`Publishing record
`Journal publications
`Peer review HMSO publications
`Printing Industries of America Publications
`Conference publications
`Press articles
`Invited Lectures, Presentations, Moderation and Webinars
`
`14
`4
`27
`58
`81
`235
`
`Teaching record
`Full-time and part-time MSc in "Printing and Coating Technology" - 80 credits
`Part-time BSc in "Printing and Coating" - 39 credits
`
`Industrial technology transfer seminars
`
`Supervision experience at University of Wales Swansea
`Visiting post-doctoral research
`PhD research
`PhD research
`TCS Program
`MPhil projects
`MPhil projects
`MSc proj ects
`MSc proj ects
`Industrial proj ects
`Fourth year research dissertation
`Third year group proj ects
`Third year proj ects
`Third year proj ects
`Visiting students / researchers
`Visiting students / researchers
`
`[1, shared supervision]
`
`[6, shared supervision]
`
`[6, technical support]
`
`[1, technical support]
`
`[2, shared supervision]
`
`[3, technical support]
`
`[9, individual supervision]
`
`[11, shared supervision]
`
`[1, individual supervision]
`
`[1, individual supervision]
`
`[1, individual supervision]
`
`[3, individual supervision]
`
`[18, shared supervision]
`
`[4, individual supervision]
`
`[4, shared supervision]
`
`Supplemental publishing record
`
`ISO Standards
`
`Dr. Mark Bohan: 17 November 2015
`
`FAST FELT 2004, pg. 51
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Appendix A
`
`Journal publications
`
`Where applicable the primary author/authors are indicated in Itafics, this is not used when there
`was only one author. My name has been highlighted in Bold. Where all author/authors are
`highlighted then equal contributions were made to the paper from all concerned. In no instance
`was the order of the authors determined alphabetically.
`
`Bould, D.C., Claypole, T.C. and Bohan, M.F.J., "An investigation into plate deformation in
`flexographic printing", lMechE part B, Vol 218, pp 1499 - 1511, 2004.
`
`Bould, D.C., Claypole, T.C. and Bohan, M.F.J. "An experimental investigation into
`flexographic printing plates" TAGA Journal of Graphic Technology Volume 1, No. 3,
`2004.
`
`Bohan, M.F.J., Fox, I.J., Claypole, T.C. and Gethin, D.T. "Influence of non-Newtonian
`fluids on the performance of a soft elastohydrodynamic nip contact with surface
`roughness" IMechE part J, vol 217, pp 447-459, 2003.
`
`Fox, I.J., Claypole, T.C. and Bohan, M.F.J. "Print sharpness evaluation using image
`analysis and a new peak area method" Imaging Science Journal, vol. 51, no. 4, pp. 199-212,
`2003.
`
`Fox, I.J., Bohan, M.F.J., Claypole, T.C. and Gethin, D.T. "Film thickness prediction in
`half tone screen printing", IMechE part E, Journal of Process Mechanical Engineering, vol.
`217, no. 4, pp. 345-359(15), 2003.
`
`Korochkina, T.V., Jewell, E.H., Claypole, T.C., Gethin, D.T. and Bohan, M.F.J. "Two-
`dimensional simulation of the transfer pad in pad printing", TAGA J. Graphic Technology,
`2003.
`
`Bohan, M.F.J., Fox, I.J., Claypole, T.C. and Gethin, D.T. "Numerical modelling of
`elastohydrodynamic lubrication in soft contacts using non-Newtonian fluids", Vol. 12, no.
`4, Int. J. Numerical Methods Heat & Fluid Flow, 2002.
`
`Bohan, M.F.J., Claypole, T.C. and Gethin, D.T. "The application of roughness model to a
`soft EHL contact" Vol. 12, no. 4, Int. J. Numerical Methods Heat & Fluid Flow, 2002.
`
`Bohan, M.F.J., Gethin, D.T., Claypole, T.C. and Megat Ahmed, M.M.H. "A model for ink
`impression in printing contacts" J. of Pulp and Paper Science, vol. 26, no 11, pp 414-419,
`November 2000.
`
`2
`
`4
`
`5
`
`6
`
`7
`
`8
`
`9
`
`10
`
`Bohan, M..F.J., Claypole, T.C. and Gethin, D.T. "The effect of process parameters on
`product quality in rotogravure printing", Proc. IMechE part B, vol. 214, 2000, pp 205-219,
`2000.
`
`Dr. Mark Bohan: 17 November 2015
`
`FAST FELT 2004, pg. 52
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Appendix A
`
`11
`
`12
`
`13
`
`14
`
`Anderson, J.T., Gethin, D.T., Claypole, T.C., Jewell, E.H., Bohan, M.F.J. and
`Korochkina, T.V. "Hydrodynamic interactions in the screen printing process", J. Prepress
`& Printing Technology, ppl0-17, March 2000.
`
`Bohan, M.F.J., Claypole, T.C. and Gethin, D.T. "An investigation into the effect of
`process parameters on the ink supply characteristics to a roller train in a offset printing
`press", J. Prepress & Printing Technology, vol. 3, March 1999.
`
`Bohan, M.F.J., Lira, C.H., Korochkina, T.V., Claypole, T.C., Gethin, D.T. and Roylance,
`B.J. "An investigation of the hydrodynamic and mechanical behaviour of a soft nip in
`rolling contact", Proc. IMechE part J Engineering Tribology, vol. 211 no. J1, pp37-50, 1997.
`
`Lira, C.H., Bohan, M.F.£, Claypole, T.C., Gethin, D.T. and Roylance, B.J. "A finite
`element investigation into a soft rolling contact supplied by a non-Newtonian ink", J. Phys.
`D: Appl. Phys, vol. 29, pp 1894-1903, 1996.
`
`Dr. Mark Bohan: 17 November 2015
`
`FAST FELT 2004, pg. 53
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Appendix A
`
`Printing Industries of America (formerly PIA/GATF) Publications
`
`Bohan, M.F.J. and Bodnar, J. "Utilizing NFC in Graphic Communications", White Paper
`05, 2015.
`
`Mooney, D. and Bohan, M.F.J. "2015 Survey of Management Information Systems:
`Software Available in Spanish", Technology Bulletin 16, 2015.
`
`Mooney, D. and Bohan, M.F.J. "2015 Survey of Management Information Systems",
`Technology Bulletin 15, 2015.
`
`Mooney, D. and Bohan, M.F.,I. "2014 Survey of Management Information Systems:
`Software Available in Spanish", Technology Bulletin 13, 2014.
`
`Mooney, D. and Bohan, M.F.J. "2014 Survey of Management Information Systems",
`Technology Bulletin 12, 2014.
`
`Duvall, M. and Bohan, M.F.J. "Automated Solutions: A Closer Look at Creel Printing",
`White Paper 04, 2013.
`
`Whisler, K., Mauro, J. and Bohan, M.F.J. "Automated Quality Control: Vision Inspection
`Systems in Print", White Paper 03, 2013.
`
`Mooney, D. and Bohan, M.F.,I. "2013 Survey of Management Information Systems:
`Software Available in Spanish", Technology Bulletin 11, 2013.
`
`Mooney, D. and Bohan, M.F.J. "2013 Survey of Management Information Systems",
`Technology Bulletin 10, 2013.
`
`Mooney, D. and Bohan, M.F.J. "2012 Survey of Management Information Systems",
`Technology Bulletin 09, 2012.
`
`Bohan, M.F.,I., Dezzutti, D., and Radencic, G. "The Relationship between Color Gamut
`and Visual Quality for Digital Printing Devices", White paper, Printing Industries of
`America Catalog No. 2102, 2011.
`
`Mooney, D. and Bohan, M.F.,I. "2011 Survey of Management Information Systems",
`Technology Bulletin 07, 2011.
`
`Iskey, B. and Bohan, M.F.J. "The use of Automation on a Cutter", RTR 50, Printing
`Industries of America Catalog No. 1650, 2010.
`
`Iskey, B., Radencic, G. and Bohan, M.F.J. "Increasing Productivity on a Stitcher Using
`Automation", RTR 49, Printing Industries of America Catalog No. 1649, 2010.
`
`2
`
`4
`
`5
`
`6
`
`7
`
`8
`
`9
`
`10
`
`11
`
`12
`
`13
`
`14
`
`Dr. Mark Bohan: 17 November 2015
`
`FAST FELT 2004, pg. 54
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Appendix A
`
`15
`
`16
`
`17
`
`18
`
`19
`
`2O
`
`21
`
`22
`
`23
`
`24
`
`25
`
`26
`
`27
`
`Mooney, D. and Bohan, M.F.J. "2010 Survey of Management Information Systems",
`Technology Bulletin 05, 2010.
`
`Bohan, M.F.J. and Iskey, B. "The Challenges with the Purchase and Installation of a New
`MIS", White paper, Printing Industries of America Catalog No. 2101, 2010.
`
`Mooney, D. and Bohan, M.F.J. "2009 Survey of Management Information Systems",
`Technology Bulletin 04, 2009.
`
`Radencic, G., and Bohan, M.F.J. "2009 Sheetfed Benchmarking Study", RTR 48, Printing
`Industries of America Catalog No. 1648, 20079
`
`Radencic, G. and Bohan, M.F.J. "2009 Digital Benchmarking Study", RTR 47, Printing
`Industries of America Catalog No. 1648, 2009.
`
`Radencic, G., Neumann, E. and Bohan, M.F.J. "Spectrophotometer Inter-Instrument
`Agreement on Standard Reference Materials and Printed Samples", RTR 46, PIA/GATF
`Catalog No. 1646, 2008.
`
`Mooney, D. and Bohan, M.F.J. "2008 Survey of Management Information Systems",
`Technology Bulletin 03, 2008.
`
`Radencic, G., Suffoletto, J., and Bohan, M.F.J. "An Evaluation of the G7TM Calibration
`Method for Proofing and Printing", RTR 45, PIA/GATF Catalog No. 1645, 2007.
`
`Mooney, D. and Bohan, M.F.J. "2007 Survey of Management Information Systems",
`Technology Bulletin 02, 2007.
`
`Radencic, G., and Bohan, M.F.J. "PIA/GATF Sheetfed Benchmarking Study 2007", RTR
`44, PIA/GATF Catalog No. 1644, 2007.
`
`Radencic, G., and Bohan, M.F.J. "The effects of "corrosive-resistant" fountain solutions
`on print quality and runnability PIA/GATF Multi-Vendor Investigation", PIA/GATF
`Catalog No. 1643, 2007.
`
`Mooney, D. and Bohan, M.F.J. "2006 Survey of Management Information Systems",
`Technology Bulletin 01, 2006.
`
`Bohan, M.F.J. "Heatset Web Offset Performance Study
`Investigation", PIA/GATF Catalog No. 1641, 2005.
`
`PIA/GATF Multi-Vendor
`
`Dr. Mark Bohan: 17 November 2015
`
`FAST FELT 2004, pg. 55
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Appendix A
`
`Peer Reviewed AERE publications
`
`Where applicable the primary author/authors are indicated in ItaBcs, this is not used when there
`was only one author. My name has been highlighted in Bold. Where all author/authors are
`highlighted then equal contributions were made to the paper from all concerned. In no instance
`was the order of the authors determined alphabetically.
`
`Bohan, M.F.J., Claypole, T.C., Livesley, D.M. and Yeoman, M.L. "A validation technique
`for use in sizing of irregular coal and char particles", AERE R-13236, 1991.
`
`Livesley, D.M., Bohan, M.F.J. and Claypole, T.C. "Flash elimination - Improving the
`performance of single-particle counters for optical sizing of irregular particles", AERE R-
`13730, 1990.
`
`Bohan, M.F.J., Claypole, T.C., Livesley, D.M. and Yeoman, M.L. "A validation technique
`for use in sizing of irregular coal particles", AERE R-13236, 1989.
`
`Bohan, M.F.J., Claypole, T.C., Livesley, D.M. and Yeoman, M.L. "Physical limitations of
`the L.D.A. based sizing of irregular particles", AERE R-13235, 1989.
`
`2
`
`4
`
`Dr. Mark Bohan: 17 November 2015
`
`FAST FELT 2004, pg. 56
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Appendix A
`
`Conference publications
`
`Where applicable the primary author/authors are indicated in Italics, this is not used when there
`was only one author. My name has been highlighted in Bold. Where all author/authors are
`highlighted then equal contributions were made to the paper from all concerned. In no instance
`was the order of the authors determined alphabetically.
`
`Bohan, M.F.J., and Bodnar, J. "Active and Intelligent Packaging", 67th TAGA Tech.
`Conf., Albuquerque, 2015.
`
`Stanton, T., Ferrari, L. and Bohan, M.F.J. "Color Uniformity of Electrophotographic
`Presses: Continuous Uniformity", 66th TAGA Tech. Conf., Ft Worth, 2014.
`
`Stanton, T., Ferrari, L. and Bohan, M.F.J. "Color Uniformity of Digital Presses", 65th
`TAGA Tech. Conf., Portland, 2013.
`
`Iskey, B., Harvey, J. and Bohan, M.F.J. "Annualized Workflow Optimization ROI
`Strategies Utilizing JDF Technology", 65th TAGA Tech. Conf., Portland, 2013.
`
`Bohan, M.F.J., Stratton, H., and Stanton, T., "A model for the cost analysis of offset and
`digital printing processes", 65th TAGA Tech. Conf., Portland, 2013.
`
`Stanton, T., Ferrari, L. and Bohan, M.F.J. "Analysis of the survivability of mail in the
`postal stream", 64th TAGA Tech. Conf., Jacksonville, 2012.
`
`Stanton, T., and Bohan, M.F.J. "Analysis of high speed inkjet presses", 63rd TAGA
`Tech. Conf., Pittsburgh, 2011.
`
`Radencic, G., and Bohan, M.F.J. "Productivity of Digital Printing Devices", 62nd TAGA
`Tech. Conf., San Diego, 2010.
`
`Iskey, B., and Bohan, M.F.J. "The Analysis of Workflow Changes Using JDF and
`Automation", 62nd TAGA Tech. Conf., San Diego, 2010.
`
`Stanton, T., and Bohan, M.F.J. "An analytical and experimental evaluation of ink
`optimization strategies", 61st TAGA Tech. Conf., New Orleans, 2009.
`
`Radencic, G., and Bohan, M.F.J. "Just run it! An experimental evaluation of digital
`printing performance", 61st TAGA Tech. Conf., New Orleans, 2009.
`
`Radencic, G., and Bohan, M.F.J. "Sheetfed productivity characteristics", 61st TAGA
`Tech. Conf., New Orleans, 2009.
`
`Radencic, G., and Bohan, M.F.J. "A comparison of spectrodensitometers and their
`agreement on common graphic arts materials", 60th TAGA Tech. Conf., San Francisco,
`2008.
`
`2
`
`4
`
`5
`
`6
`
`7
`
`8
`
`9
`
`10
`
`11
`
`12
`
`13
`
`Dr. Mark Bohan: 17 November 2015
`
`FAST FELT 2004, pg. 57
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Appendix A
`
`14
`
`15
`
`16
`
`17
`
`18
`
`19
`
`2O
`
`21
`
`22
`
`23
`
`24
`
`25
`
`26
`
`27
`
`Neumann, E.L., Radencic, G., and Bohan, M.F.J. "An Evaluation of Different Strategies
`for Ink Optimization on Press", 60th TAGA Tech. Conf., San Francisco, 2008.
`
`Radencic, G., Suffoletto, J., and Bohan, M.F.J. "A Theoretical and Experimental
`Comparison of the GRACoL and ISO Approaches to Press Characterization and the Data
`Sets Produced", 59th TAGA Tech. Conf., 2007.
`
`Radencic, G., Cathie, E., Ferrari, L., and Bohan, M.F.J. "The Impact of Changing
`Fountain Solution Chemistry and Press Consumables on the Runnability of a Web Offset
`Press", 59th TAGA Tech. Conf., 2007.
`
`Bould, D.C., Hamblyn, S., Claypole, T.C. Bohan, M.F.J. "The effect of process
`characteristics on image reproduction in flexographic printing" 33rd International iarigai
`Research Conference, 2006.
`
`Bohan, M.F.J., Iskey, B., Wagner, R., and Radencic, G. "Automation and JDF workflows",
`58th TAGA Tech. Conf., 2006.
`
`Bohan, M.F.J., Cathie, E., and Ferrari, L. "Manual and analytical assessment of piling",
`58th TAGA Tech. Conf., 2006.
`
`Stanton, T., and Bohan, M.F.J. "The Influences of Overprint Coatings on the Color
`Gamuts of Lithographic Prints", 58th TAGA Tech. Conf., 2006.
`
`Bohan, M.F.J., and Lind, J. "Quantification of piling", 57th TAGA Tech. Conf., 2005.
`
`Bohan, M.F.J., and Lind, J. "The influence of coating on general and reference printing
`conditions", 57th TAGA Tech. Conf., 2005.
`
`Hamblyn, S., Bould, D., Bohan, M.F.J., Claypole, T.C., and Gethin, D.T. "Consistency of
`Flexographic Platemaking", 57th TAGA Tech. Conf., 2005.
`
`Cherry, J., Hamblyn, S., Bohan, M.F.J., Claypole, T.C., and Gethin, D.T. "Measurement
`of the Cell Volume of Anilox Rolls", 57th TAGA Tech. Conf., 2005.
`
`COst, A.M., Bohan, M.F.J., and Claypole, T.C. "The Effect of Diamond Geometry and
`th
`Wear on Rotogravure Engraving , 57 TAGA Tech. Conf., 2005.
`
`Bohan, M.F.J., and Claypole, T.C. "The influence of viscosity in rotogravure halftone
`reproduction", 12th IPGAC Int. Printing and Graphics Arts Conf., 2004.
`
`Bohan, M.F.J., and Claypole, T.C. "The influence of engraving specifications, ink viscosity
`and substrate on the printability of lines using rotogravure printing", 12th IPGAC Int.
`Printing and Graphics Arts Conf., 2004.
`
`Dr. Mark Bohan." 17 November 2015
`
`FAST FELT 2004, pg. 58
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Appendix A
`
`Prior to appointment at Printing Industries of America
`
`28
`
`29
`
`30
`
`31
`
`32
`
`33
`
`34
`
`35
`
`36
`
`37
`
`38
`
`39
`
`40
`
`41
`
`Bould, D.C., Claypole, T.C. Bohan, M.F.J. and Gethin, D.T "Tone gain due to deformation
`of the flexographic plate" 31st International iarigai Research Conference, 2004.
`
`Bohan, M.F.J., Clist, A.M., Claypole, T.C. and Gethin, D.T. "Scumming: The Influence of
`the Cylinder", 56th TAGA Tech. Conf., 2004.
`
`Bould, D.C., Claypole, T.C. Bohan, M.F.J. and Gethin, D.T. "Deformation of flexographic
`printing plates", 56th TAGA Tech. Conf., 2004.
`
`Bohan, M.F.J., Townsend, P., Hamblyn, S.M., Claypole, T.C. and Gethin, D.T.
`"Evaluation of pressures in flexographic printing", 55th TAGA Tech. Conf., 2003.
`
`Bohan, M.F.J., Korochkina, T.V., Claypole, T.C. and Gethin, D.T. "Analysis of doctor
`blade loading and wear", 55th TAGA Tech. Conf., 2003.
`
`Fox, I.J., Bohan, M.F.J., Claypole, T.C. and Gethin, D.T. "Improving the speed and
`resolution of screen-printing for industrial applications", 55th TAGA Tech. Conf., 2003.
`
`Bohan, M..F.J., Fox, I.J., Gethin, D.T., and Claypole, T.C. "Numerical model of surface
`roughness and its effect on fluid transfer", 11th IPGAC Int. Printing and Graphics Arts
`Conf., 2002.
`
`Bohan, M.F.J., Fox, I.J., Claypole, T.C. and Gethin, D.T. "Parametric study of the flow in
`printing and coating nips: The influence of non-Newtonian fluids", 54th TAGA Tech.
`Conf., 2002.
`
`Bohan, M.F.J., Claypole, T.C. and Gethin, D.T. "Roughness modelling of soft
`elastohydrodynamic lubrication contacts" ECCOMAS CFD 2001.
`
`Bohan, M.F.J., Claypole, T.C. and Gethin, D.T. "Dynamic measurement of ink film
`thickness, pressure and temperature in rolling contacts" 53rd TAGA Tech. Conf., 2001.
`
`Bohan, M.F.J., Claypole, T.C., COst, A.M. and Gethin, D.T. "Characterisation of gravure
`cylinders" 53rd TAGA Tech. Conf., 2001.
`
`Korochkina, T.V., Jewell, E.H., Claypole, T.C., Gethin,
`"Numerical analysis of pad deformation", 2nd Int. Symp.
`Technology, Swansea, September 2000.
`
`D.T. and Bohan, M.F.J.
`On Printing And Coating
`
`Jewell, E.H., Claypole, T.C. Bohan, M.F.J. and Von Grol, M. "Modelling the flow in a
`flexographic ink chamber" 52nd TAGA Tech. Conf., 2000.
`
`Claypole, T.C., Bohan, M.F.J., Jewell, E.H. and Gethin, D.T. "Optimisation of the printing
`process using dynamic analysis" 51st TAGA Tech. Conf., 1999.
`
`Dr. Mark Bohan: 17 November 2015
`
`FAST FELT 2004, pg. 59
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Appendix A
`
`42
`
`43
`
`44
`
`45
`
`46
`
`47
`
`48
`
`49
`
`50
`
`51
`
`52
`
`53
`
`Bohan, M.F.J., Jewell, E.H., Anderson, J.T., Claypole, T.C. and Gethin, D.T. "The use of
`orthogonal array techniques in printing research", Int. Printing and Graphic Arts Conf.,
`Quebec, October 1998.
`
`Bohan, M.F.£, Claypole, T.C., Gethin, D.T. and Megat Ahmed, M.M.H. "A Model for Ink
`impression in a porous substrate", Int. Printing and Graphic Arts Conf., Quebec, October
`1998.
`
`Claypole, T.C., Jewell, E.H., Bohan, M.F.J., and Gethin, D.T. "The development of ISO
`standards for the graphic screen printing", 1st Int. Symp. On Printing And Coating
`Technology, Swansea, September 1998.
`
`Bohan, M.F.J., Claypole, T.C. and Gethin, D.T. "Boundary element modelling of printing
`and coating nips in a sliding contact" 50th TAGA Tech. Conf., Chicago, May 1998.
`
`Bohan, M.F.J., Claypole, T.C. and Gethin, D.T. "An investigation into ink transfer in
`rotogravure printing" 50th TAGA Tech. Conf., Chicago, May 1998.
`
`Bohan, M.F.£, Claypole, T.C., Gethin, D.T. and Basri, S.B. "Application of boundary
`element modelling to soft nips in rolling contact", 49th Annual TAGA Tech. Conf., Quebec
`City, Canada, May 1997.
`
`Bohan, M.F.£, Claypole, T.C. and Gethin, D.T. "Thermal balance of sheet fed offset press
`and it’s effect on ink transfer", 49th Annual TAGA Tech. Conf., Quebec City, Canada, May
`1997.
`
`Bohan, M.F.£, Claypole, T.C. and Gethin, D.T. "An evaluation of print to print variation
`in web offset, sheet offset and gravure printing " 14th Int. Symp. on Graphic Arts, Zagreb,
`Croatia, 6th-8th November 1996.
`
`Claypole, T.C., D.T. Gethin, Lim, C.H., Bohan, M.F.J. and Basri, S.B. "An investigation of
`rubber roll distortion in a web offset press", 48th Annual TAGA Tech. Conf., Dallas, Texas,
`April 1996.
`
`Bohan, M.F.£, Claypole, T.C. and Gethin, D.T. "Factors affecting the process stability of a
`heat set web offset press", 1st TAGA/IARIGAI Tech. Conf., Paris, France, September 1995.
`
`Bohan, M.F.J., Claypole, T.C. and Gethin, D.T. "The application of Taguchi methods to
`the study of ink transfer in heat set web offset printing", 47th Annual TAGA Tech. Conf.,
`Orlando, Florida, April 1995.
`
`Bohan, M.F.J. and Claypole, T.C. "Improving the accuracy of particle sizing techniques
`using light scattered from single particles", 7th Int. Symp. on Applications of Laser
`Techniques to Fluid Mechanics, Lisbon, July 1994.
`
`Dr. Mark Bohan." 17 November 2015
`
`FAST FELT 2004, pg. 60
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Appendix A
`
`54
`
`55
`
`56
`
`57
`
`58
`
`Bohan, M.F.J., Claypole, T.C., D.T. Gethin, Lira, C.H.
`experimental investigation of heat set web-offset printing",
`Methods and QFD Symp., May 1994.
`
`and Roylance, B.J. "An
`1994 European Taguchi
`
`Bohan, M.F.J., Claypole, T.C., Livesley, D.M. and Yeoman, M.L. "The scattering of light
`from irregular particles and the subsequent development of a signal validation technique to
`......
`,,
`rd
`improve the accuracy of pamcle s~zmg using laser based techmques , Proc. of the 3 U.K.
`L.D.A. Colloquia., Swansea, 1992.
`
`Livesley, D.M., Bohan, M.F.J. and Claypole, T.C. "Flash elimination - Improving the
`performance of single-particle counters for optical sizing of irregular particles", Proc. of the
`2nd Int. Symp. on Optical Particle Sizing, Temple, Arizona, 1990.
`
`Bohan, M.F.J., Claypole, T.C., Jones, L.M. and Rollings, H. "Velocity measurements in
`gas flames", 3rd Int. Conf. on Laser Anemometry - Advances and Applications, Swansea,
`1989.
`
`Bohan, M.F.J. and Claypole, T.C. "A design strategy for a miniature, robust laser
`anemometer", Proc. of a Colloquia, Special applications, Rotating machinery, Miniature
`systems, Swansea, 1988.
`
`Dr. Mark Bohan: 17 November 2015
`
`FAST FELT 2004, pg. 61
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Appendix A
`
`Press articles
`My name has been highlighted in Bold. In no instance was the order of the authors determined
`alphabetically.
`
`Bohan, M.F.J. "Hybrid Press Design", The Magazine, Printing Industries Press, September
`2015.
`
`Bohan, M.F.J. "Combining Digital & Offset Workflows", The Magazine, Printing
`Industries Press, September 2015.
`
`Bohan, M.F.J., Workman, J., and Mooney, D. "Press Assessments Ensure New
`Acquisitions Will Meet Your Needs", The Magazine, Printing Industries Press, June 2015.
`
`Jones, G., Gazda, J., Benek, M. and Bohan, M.F.J. "Production Solutions: Sustainable
`Printing Practices From The EHS Team", The Magazine, Printing Industries Press, June
`2015.
`
`Bohan, M.F.J. "Marketing Automation: Engaging With The Customer", The Magazine,
`Printing Industries Press, February 2015.
`
`Bohan, M.F.J. "Time Of Transformation: The Influence Of Production Inkier’, The
`Magazine, Printing Industries Press, January 2015.
`
`Bohan, M.F.J. and Bodnar, J. "How Packaging Will Interact With Consumers", The
`Magazine, Printing Industries Press, January 2015.
`
`Bohan, M.F.J. and Ferrari, L. "Maximum Performance: Achieve It Through Consistency",
`The Magazine, Printing Industries Press, December 2014.
`
`Bohan, M.F.J. "Industry Q & A", The Magazine, Printing Industries Press, October 2014.
`
`Bohan, M.F.J., and Jones, G. "Smart Packaging", The Magazine, Printing Industries Press,
`February 2014.
`
`Bodnar, J. and Bohan, M.F.J. "The Application and Use of NFC", The Magazine, Printing
`Industries Press, February 2014.
`
`Bohan, M.F.J., and Mooney, D. "The Importance of Management Information Systems
`And How to Implement Them in Your Facility", The Magazine, Printing Industries Press,
`January 2014.
`
`Workman, J., and Bohan, M.F.J. "Level of Technology Innovation Remains High", The
`Magazine, Printing Industries Press, January 2014.
`
`Bohan, M.F.J. "Jazzing Up Your Brand with Cool Varnishes, Inks, and Substrates", The
`Magazine, Printing Industries Press, November 2013.
`
`2
`
`4
`
`5
`
`6
`
`7
`
`8
`
`9
`
`10
`
`11
`
`12
`
`13
`
`14
`
`Dr. Mark Bohan: 17 November 2015
`
`FAST FELT 2004, pg. 62
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Appendix A
`
`15
`
`16
`
`17
`
`18
`
`19
`
`20
`
`21
`
`22
`
`23
`
`24
`
`25
`
`26
`
`27
`
`28
`
`29
`
`Workman, J., and Bohan, M.F.J. "Whose Patent Are You Infringing?," The Magazine,
`Printing Industries Press, September 2013.
`
`Bohan, M.F.J. "Job Management & Tracking Product" The Magazine, Printing Industries
`Press, September 2013.
`
`Bohan, M.F.J. "Industry Q & A" The Magazine, Printing Industries Press, September 2013.
`
`Bohan, M.F.J., "Successful Workflow Automation", The Magazine, Forecast Part 2,
`Printing Industries Press, July 2013.
`
`Bohan, M.F.J., and Mooney, D. "Selecting Your Management Information System", The
`Magazine, Forecast Part 2, Printing Industries Press, July 2013.
`
`Bohan, M.F.J., and Dezzutti, D., "Developments in High-Speed Inkier’, The Magazine,
`Forecast Part 2, Printing Industries Press, July 2013.
`
`Bohan, M.F.J., Bodnar, J., and Dezzutti, D., "Wide- and Grand Format Inkjet: Where are
`the Opportunities and Technical Developments", The Magazine, Forecast Part 2, Printing
`Industries Press, July 2013.
`
`Bohan, M.F.J., "Enhancing the Evaluation of Innovative and Future Technologies", The
`Magazine, Printing Industries Press, June 2013.
`
`Bohan, M.F.J., and Shaffer, J. "Technology Impacts in the Industry", The Magazine,
`Forecast Part 2, Printing Industries Press, July 2012.
`
`Bohan, M.F.J., Workman, J., and Iskey, B. "What’s Hot and Changing the Graphic
`Communications Industry", The Magazine, Forecast Part 2, Printing Industries Press, July
`2012.
`
`Iskey, B., and Bohan, M.F.J. "The New Reality of Workflow Automation", The Magazine,
`Forecast Part 2, Printing Industries Press, July 2012.
`
`Iskey, B., and Bohan, M.F.J. "Digital Wide-Format: JDF Certification", The Magazine,
`Forecast Part 2, Printing Industries Press, July 2012.
`
`Bohan, M.F.J., Dezzutti, D., and Iskey, B "High-Speed Inkjet Developments: How the
`Market Is Changing", The Magazine, Forecast Part 2, Printing Industries Press, July 2012.
`
`Workman, J., and Bohan, M.F.J. "Technical Innovations Propel the Industry", The
`Magazine, Forecast Part 1, Printing Industries Press, January 2012.
`
`Iskey, B. and Bohan, M.F.J. "Digital Certification Improves Profitability", The Magazine,
`Forecast Part 1, Printing Industries Press, January 2012.
`
`Dr. Mark Bohan: 17 November 2015
`
`FAST FELT 2004, pg. 63
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Appendix A
`
`30
`
`31
`
`32
`
`33
`
`34
`
`35
`
`36
`
`37
`
`38
`
`39
`
`40
`
`41
`
`42
`
`43
`
`44
`
`Iskey, B., and Bohan, M.F.J. "Integrating Workflow Increases Productivity and
`Profitability", The Magazine, Forecast Part 1, Printing Industries Press, January 2012.
`
`Dezzutti, D., Workman, J., and Bohan, M.F.J. "Wide-Format Opportunities", The
`Magazine, Forecast Part 1, Printing Industries Press, January 2012.
`
`Radencic, G., and Bohan, M.F.J., "Color Management for Digital", The Magazine,
`Forecast Part 2, Printing Industries Press, September 2011.
`
`Radencic, G., and Bohan, M.F.J., "Performance Evaluation of Wide-Format Inkjet", The
`Magazine, Forecast Part 2, Printing Industries Press, September 2011.
`
`Iskey, B. and Bohan, M.F.J. "Workflow Solutions with JDF", The Magazine, Forecast Part
`2, Printing Industries Press, September 2011.
`
`Bohan, M.F.J., Evans, B. and Ferrari, L. "The Importance of Ink Color and How to
`Measure It", The Magazine, Forecast Part 2, Printing Industries Press, September 2011.
`
`Radencic, G., and Bohan, M.F.J., "Methods for Printing to Targeted Conditions", The
`Magazine, Forecast Part 2, Printing Industries Press, September 2011.
`
`Bohan, M.F.J. and Iskey, B. "High-Speed Inkjet", The Magazine, Printing Industries Press,
`July 2011.
`
`Iskey, B. and Bohan, M.F.J. "JDF Certification Is Golden", The Magazine, Printing
`Industries Press, July 2011.
`
`Bohan, M.F.J. "Emerging Technologies", The Magazine, Printing Industries Press, May
`2011.
`
`Sweeney, J., and Bohan, M.F.J. "Color Measurement Numbers: What Do the Numbers
`Refer To?", The Magazine, Printing Industries Press, May 2011.
`
`Bohan, M.F.J. "Evolution of Inkj et Technologies", 2011 Forecast, Printing Industries Press,
`January 2011.
`
`Workman, J., and Bohan, M.F.J. "Technical Innovation Is a Key to Business Success",
`2011 Forecast, Printing Industries Press, January 2011.
`
`Iskey, B. and Bohan, M.F.J. "How Automation Can Positively Transform Your Business",
`2011 Forecast, Printing Industries Press, January 2011.
`
`Iskey, B., Mooney, D., and Bohan, M.F.J. "MIS Selection and Implementation", 2011
`Forecast, Printing Industries Press, January 2011.
`
`Dr. Mark Bohan: 17 November 2015
`
`FAST FELT 2004, pg. 64
`Owens Corning v. Fast Felt
`IPR2015-00650
`
`
`
`Appendix A
`
`45
`
`46
`
`47
`
`48
`
`49
`
`50
`
`51
`
`52
`
`53
`
`54
`
`55
`
`56
`
`57
`
`58
`
`59
`
`Bohan, M.F.J. "Inkjet: Moving Forward at an Increasing Pace" The Magazine, Printing
`Industries Press, September 2010.
`
`Bohan, M.F.J. "The Added Value of Print--What Are Your Options?", 2010 Forecast,
`Printing Industries Press, January 2010.
`
`Radencic, G., Bohan, M.F.J., and Ferrari, L. "Benchmarking Metrics to Improve
`Productivity", 2010 Forecast, Printing Industries Press, January 2010.
`
`Iskey, B. and Bohan, M.F.J. "Integration Techniques for an Automation Production
`Facility", 2010 Forecast, Printing Industries Press, January 2010.
`
`Bohan, M.F.J. and Meyers, J. "InterTech Technology Awards--Innovation Is the Key",
`2010 Forecast, Printing Industries Press, January 2010.
`
`Iskey, B. and Bohan, M.F.J. "JDF: Status, Updates, and Workflow Solutions", 2010
`Forecast, Printing Industries Press, January 2010.
`
`Bohan, M.F.J. and Radencic, G. "Driving Down Costs with Benchmarking", The
`Magazine, Printing Industries Press, June/July 2009.
`
`Bohan, M.F.J. and Iskey, B. "Automation and JDF in Production", The Magazine, Printing
`Industries Press, June/July 2009.
`
`Bohan, M.F.J. and Iskey, B. "Automation and MIS", The Magazine, Printing Industries
`Press, April 2009.
`
`Bohan, M.F.J. and Radencic, G. "Benchmarking for Improved Margins", The Magazine,
`Printing Industries Press, April 2009.
`
`Bohan, M.F.J. and Iskey, B. "JDF: Status, Updates, and Workflow Solutions", 2009
`Forecast, Printing Industries Press, February 2009.
`
`Bohan, M.F.J. and Neumann, E. "Techniques to Add Value to Your Printing", 2009
`Forecast, Printing Industries Press, February 2009.
`
`Bohan, M.F.J. and Radencic, G. "Spectrophotometer Developments", 2009 Forecast,
`Printing Industries Press, February 2009.
`
`Bohan, M.F.J. and Neumann, E. "Innovation Is the Key--the InterTech Technology
`Awards", 2009 Forecast, Printing Industries Press, February 2009.
`
`Bohan, M.F.J., Iskey, B., and Mooney, D. "Management Information Systems", 2009
`Forecast, Printing Industries Press, February 20