`
`NUVASIVE 1014
`NuVasive, Inc. v. Warsaw Orthopedic, Inc.
`IPR2013-00206
`
`
`
`2nd Edition, 1993
`
`Exhibit HVC-7 being a copy of Crock, A Short Practice of
`Spinal Surgery, Springer—Verlag Wein New York, Revised
`
`1, Henry Vernon Crock, of 13 Sargood Street, Toorak 3142, Victoria, Australia, retired
`
`orthopaedic spine surgeon, say on oath:
`
`I have been engaged by NuVasive, Inc. to review and provide comment on a number of
`
`publications in the field of spinal surgery. I have been advised that the disclosures and
`
`teachings in these publications have been put into issue in a patent lawsuit pending in
`
`the United States between NuVasive, Inc. and a subsidiary of Medtronic, Inc., namely,
`
`Warsaw Orthopedic, Inc.
`
`I have also been engaged to provide comment on certain
`
`testimony and contentions arising in connection to this lawsuit.
`
`I am being compensated for my time actually spent in working on this matter at my
`
`customary rate for consulting matters, and have received no compensation for this
`
`declaration from NuVasive, Inc., its representatives, or otherwise beyond that.
`
`In
`
`addition, I will not receive any added compensation based on the outcome of any
`
`proceedings in which my prior work is at issue. Finally, I am not, and never have been,
`
`an employee of NuVasive, Inc.
`
`I have been provided with a copy of the Federal Court of Australia Practice Note CM7
`
`entitled “Expert Witnesses in Proceedings in the Federal Court of Australia” by a
`
`representative of NuVasive, Inc. Now shown to me and marked Exhibit HVC-l is a
`
`copy of Practice Note CM7. In considering the matters put to me and making this
`
`affidavit, I have complied with Practice Note CM7.
`
`Experience and Qualifications
`
`I have been asked me to provide details of my background and experience, particularly
`
`2
`
`
`
`
`
`3
`
`wherein disc material between adjacent vertebral bodies is removed and replaced with
`
`one or more fusion—promoting implants for the purpose of forming a bone bridge
`
`between the adjacent vertebral bodies to immobilize that spinal segment.
`
`I practiced spinal surgery from 1961 until my retirement in 2001.
`
`I practiced first at St.
`
`Vincent’s Hospital in Melbourne, Australia from 1961 until 1986 and held various
`
`titles including Senior Orthopaedic Surgeon. In 1986, I moved to London, England
`
`and practiced spinal surgery at various hospitals and held various appointments
`
`including Honorary Senior Lecturer and Consultant Spinal Surgeon in the Department
`
`of Orthopaedic Surgery at the Royal Postgraduate Medical School, Hammersmith
`
`Hospital, and Director of the Spinal Disorders Unit at Cromwell Hospital. I retired in
`
`2001 and moved back to Melbourne.
`
`I obtained a Doctor of Medicine and Doctor of Surgery (M.B.B.S.) from the University
`
`of Melbourne in 1953, a Medical Doctorate (M.D.) from the University of Melbourne
`
`in 1967, and a Masters of Surgery (MS) from the University of Melbourne in 1977.
`
`In terms of specialised training in surgery, I was made a Fellow of the Royal College of
`
`Surgeons in London in 1957 and a Fellow of the Royal Australasian College of
`
`Surgeons in 1961.
`
`I have received numerous awards and honours during my career, including Officer of
`
`the Order of Australia (A0.) in 1984 for services to medicine, especially in the field of
`
`orthopaedic surgery, Corresponding Fellow of the Japanese Orthopaedic Association in
`
`1990, Honorary Fellow of the Royal College of Surgeons, Edinburgh in 1997,
`
`Honorary Member Spine Society of Australia in 2006, and Honorary Doctorate of
`
`Science from the University of Melbourne in 2009, the highest honorary award given
`
`by a university. In addition, I was elected President of the International Society for the
`
`Study of the Lumbar Spine in 1985, and have been awarded the LO Betts Medal by the
`
`3
`
`
`
`
`
`4
`
`Australian Orthopaedic Association, the Sir Alan Newton Prize by the Royal
`
`Australasian College of Surgeons and the Wood Jones Medal by the College of
`
`Surgeons of England.
`
`I have lectured extensively on spinal surgery, including at least 66 guest lectures in at
`
`least 17 countries between the years of 1985 and 2001 alone, and extended lecture tours
`
`once or twice a year from 1966 until my retirement in 2001 visiting Europe, Russia,
`
`Scandinavia, Canada, Japan, USA, Peoples’ Republic of China, Hong Kong, India,
`
`Singapore, Indonesia, the Philippines, India, Great Britain, and Saudi Arabia.
`
`I pride myself on being a teacher. Following my appointment at St. Vincent’s
`
`Hospital, Melbourne in 1961, I became actively involved in undergraduate and post-
`
`graduate teaching of orthopaedic surgery and, in particular, spinal surgery. Icontinued
`
`training post-graduate fellows in spine surgery after moving to London in 1986.
`
`I
`
`have trained at least 26 post-graduate fellows from countries ranging from Indonesia,
`
`India, Canada, USA, Japan, Scotland, and Pakistan. In terms of teaching positions, I
`
`was also Lecturer in Orthopaedic Surgery at Oxford University from 1959-1961,
`
`Professorial Associate at St. Vincent’s Hospital, Melbourne from 1961-1986, Visiting
`
`Lecturer in the Department of Anatomy at the Royal College of Surgeons of England,
`
`Senior Lecturer in the Department of Orthopaedics at the Royal Postgraduate Medical
`
`School at Hammersmith Hospital, and Director of Spinal Disorders Unit at Cromwell
`
`Hospital.
`
`1 have written a multitude of publications regarding spine surgery and served on the
`
`editorial boards of the British Journal of Bone and Joint Surgery, The European Spine
`
`Society Journal, Neuro-Orthopaedics (now ceased), and The Journal of Orthopaedic
`
`Science from the Japanese Orthopaedic Association. Among my publications include 6
`
`books, 26 book chapters, and at least 35 papers, all of which were peer-reviewed. My
`
`4
`
`
`
`
`
`5
`
`Medical Association prize for Basic Science and Clinical Medicine in 1996. My paper
`
`“A Reappraisal of Intervertebral Disc Lesions” originally published in the Medical
`
`Journal of Australia in 1970 was in 2005 cited in The Spine Journal of North America
`
`as a seminal paper on spinal surgery in the 20th Century.
`
`Now shown to me and marked Exhibit HVC-2 is a copy of my curriculum vitae
`
`setting out my experience and publications.
`
`I was born on Sept 14, 1929 and am currently 82 years of age.
`
`I am of sound mind and
`
`able to understand completely and fully the contents of the materials I have reviewed
`
`and the statements I am making below. Although I am retired, I continue to receive
`
`and read various medical journals in my field of expertise, and attend medical
`
`conferences and collaborate with others in the field of spinal orthopaedics. For
`
`example, I still receive and regularly read publications including the Journal of
`
`Orthopaedic Science from the Japanese Orthopaedic Association, the Journal of the
`
`British Orthopaedic Association, the Australia and New Zealand Journal of Surgery,
`
`and the Journal of the Royal College of Surgeons of Edinburgh.
`
`I am also still a
`
`member of a variety of spine surgery associations, including the Australia Orthopaedic
`
`Association, the British Orthopaedic Association, the Japanese Orthopaedic
`
`Association, and am currently President of DISCS — The Diagnostic Investigation of
`
`Spine Conditions and Sciatica in London — a charitable trust established in 1993.
`
`Currently, my physical health is such that I am not able to handle undue stress, and I
`
`am not able to travel long distances to the United States to participate in legal
`
`proceedings.
`
`I have voluntarily agreed to provide this Affidavit and the evidence contained therein
`
`of my own free will. The information contained in this Affidavit comes from my own
`
`recollection or from the documents that I identify as having consulted.
`
`5
`
`
`
`
`
`Consideration of documents
`
`I have been asked to review and comment on five documents, which are now shown to
`
`me and marked as follows:
`
`(a)
`
`Exhibit HVC-3, being a copy of Crock, “Observations on the management of
`
`failed spinal operations,” in The Journal of Bone and Joint Surgery, Vol. 58—
`
`B, No. 2, pp. 193-199, May 1976 (hereinafter referred to as “my 1976
`
`paper”);
`
`(b)
`
`Exhibit HVC-4, being a copy of Crock, “Anterior Lumbar Interbody Fusion
`
`— Indications for its Use and Notes on Surgical Technique,” in Clinical
`
`Orthopaedics and Related Research, No. 165, May 1982 (hereinafter referred
`
`to as “my 1982 paper”);
`
`(C)
`
`Exhibit HVC-S being a copy of Fujimaki, et. Al. “The Results of 150
`
`Anterior Lumbar Interbody Fusion Operations Performed by Two Surgeons
`
`in Australia,” in Clinical Orthopaedics and Related Research, No. 165, May
`
`1982 (hereinafter referred to as the “Fujimaki et al. paper”);
`
`(d)
`
`Exhibit HVC-6 being a copy of Crock, A Practice of Spinal Surgery,
`
`Springer-Verlag Wein New York, Revised 1St Edition, 1983 (hereinafter
`
`referred to as “my 1983 book”);
`
`(6)
`
`Exhibit HVC-7 being a copy of Crock, A Short Practice of Spinal Surgery,
`
`Springer-Verlag Wein New York, Revised 2nd Edition, 1993 (hereinafter
`
`referred to as “my 1993 book”).
`
`I was asked to review the publications above and any other materials I deemed
`
`necessary and proper in order to render the recollections about my prior publications
`
`set forth below. Specifically, I was asked to provide statements on factual matters
`
`6
`
`
`
`
`
`Witness Statement
`
`To my best recollection, I learned of a spinal access technique that uses a direct lateral
`
`approach to the spine (90 degrees off of midline) during a visit to a group of spinal
`
`surgeons in Hong Kong, which occurred in about 1968. The group in Hong Kong
`
`included Dr. Hogsdon of the University of Hong Kong, who is one of the authors of the
`
`1956 article, entitled “Anterior spinal fusion: A preliminary communication on the
`
`radical treatment on Pott’s disease and Pott’s paraplegia,” in The British Journal of
`
`Surgery, Vol. 44, pp. 266-75 (1956).
`
`I have a specific recollection of the first spinal fusion surgery in which I used a direct
`
`lateral approach to the spine, and that was in a surgery performed in 1970. This direct
`
`lateral procedure was performed at the L2/L3 level of the patient, at the site of
`
`tuberculosis abscess formation (both in the disc space and in the L2 and L3 vertebral
`
`bodies). For this procedure, given it involved access at the L2/L3 region, I used a 12‘h
`
`rib incision for access, as discussed in my 1982 paper. This spinal fusion procedure
`
`addressed a condition known as “Pott’s Disease,” namely the resection of an abcess
`
`formation clue to tuberculosis. The procedure involved partial resection of the L2 and
`
`L3 vertebral bodies, as well as partial removal of the L2/L3 disc, and implantation of
`
`one or more rib grafts harvested from the patient to create a bone bridge from the L2
`
`vertebral body, through the L2/L3 disc space, to the L3 vertebral body. Based on the
`
`fusion which occurred at the L2/L3 disc space, it can be said that this procedure
`
`involved interbody fusion. The resulting fusion is shown in Figure 8.10 a,b of my 1983
`
`book, and the patient is also shown in this book in Figure 8.11. The patient was a nun
`
`from New Guinea, and she is still alive today and is in her 90’s.
`
`I remain in contact
`
`with this patient, as she has written me every year for the last 40 years, and she informs
`
`me how she is doing.
`
`I know the patient’s name, but I am not revealing her name in
`
`7
`
`
`
`
`
`8
`
`this Affidavit because it is my understanding that under Australian law that is
`
`confidential information I am not at liberty to disclose.
`
`Although I do not specifically recall the first time I performed a spinal interbody fusion
`
`procedure other than for Pott’s Disease (that is, focusing solely on interbody fusion and
`
`not involving partial resection of adjacent vertebral bodies — which I refer to hereinafter
`
`simply as “interbody fusion”) using a direct lateral approach and do not recall the
`
`specific patient on which I performed this procedure, Iknow that the first time I
`
`performed a spinal interbody fusion procedure using a direct lateral approach was in
`
`the early-to-mid-1970’s. In particular, I know that the first spinal interbody fusion
`
`procedure using a direct lateral approach occurred after I performed the direct lateral
`
`spinal fusion surgery for Pott’s Disease on the patient discussed in the immediately
`
`preceding paragraph, and Iknow that it was before the publication of my 1976 paper in
`
`which I reported details of two lateral interbody fusion procedures.
`
`At the time I did my first spinal interbody fusion procedure using a direct lateral
`
`approach in the 1970’s, I was not aware of anyone else having done such a procedure
`
`before. Still today, I am not aware of anyone else having done such a procedure before
`
`I did it in the 1970’s.
`
`During the 1980’s and 1990’s, I trained many other spinal orthopaedic surgeons in the
`
`spinal fusion techniques described in my 1982 paper and in my 1983 and 1993 books.
`
`I am the author of my 1976 paper. This paper was read at the 108th Anniversary
`
`Meeting of the Texas Medical Association, San Antonio, Texas, in May 1975. At the
`
`time I authored the paper, I was Senior Orthopaedic Surgeon at St. Vincent’s Hospital,
`
`University of Melbourne, Australia.
`
`3/ ~/“
`
`Chow/24mg,
`
`8
`
`
`
`
`
`9
`
`I am the author of my 1982 paper. I submitted this paper for publication in September
`
`of 1980. At the time I authored the paper, I was Senior Orthopedic Surgeon at St.
`
`Vincent’s Hospital, University of Melbourne, Australia
`
`I am co—author with Arihisa Fujimaki, MD. and Sir George Bedbrook, MD. of the
`
`Fujimaki et al. paper. This paper reports on 150 surgeries performed by my colleague,
`
`Dr. Bedbrook, and me, with 100 of those surgeries having been performed by me.
`
`I am the author of my 1983 book, and I am also the author of my 1993 book, which is a
`
`second edition of my 1983 book.
`
`My 1982 Paper
`
`My 1982 paper describes spinal fusion procedures that my colleague, Dr. Bedbrook,
`
`and I had performed over an 18-year period from 1961 until 1980, when I wrote my
`
`1982 paper. As reported in my 1982 paper, by 1980 I had performed approximately
`
`1000 operations over the preceding 20 years. See my 1982 paper, at p. 161. As
`
`reported in my 1993 book, by the time of the writing of my 1993 book I had performed
`
`over 1500 of the described procedures over the preceding 30 years, and had
`
`experienced no patient mortality during operation. See my 1993 book, at p. 94.
`
`My 1982 paper describes two different approaches or trajectories to be taken to the
`
`spinal column for lumbar interbody fusion, namely: (a) an anterior or anterolateral
`
`approach or trajectory, which is used in most cases of the lower lumbar region (that is,
`
`for intervertebral discs at L4/L5 and LS/Sl), and (b) a direct lateral approach or
`
`trajectory (that is, 90 degrees from the midline), which is used in the upper lumbar
`
`region (that is, for intervertebral discs at L1/LZ, L2/L3, and L3/L4) and, if permitted by
`
`the anatomy, also in some cases of the lower lumbar region.
`
`In entitling my 1982 book “anterior lumber interbody fusion,” I used that phrase in a
`
`9
`
`
`
`
`
`10
`
`lumbar interbody fusion” to refer to any fusion procedure that made an approach that
`
`did not traverse the posterior portion of the spine. In other words, if the approach was
`
`anterior of the posterior portions of the spine, it would be considered anterior lumbar
`
`spinal fusion. As such, I considered all of the procedures in my 1982 book to be
`
`anterior lumbar interbody fusion procedures, regardless of whether the approach was
`
`directly anterior, anterolateral, or directly lateral.
`
`Anterior and Anterolateral Approaches Described in my 1982 Paper
`
`My 1982 book describes that, for those procedures where an anterior or anterolateral
`
`approach is used (for example, in the lower lumbar fusions), the patient is placed
`
`supine on the operating table. See my 1982 paper, at p. 158. My 1982 paper describes
`
`that, using this anterior or anterolateral approach to the disc space, two parallel cavities
`
`would be formed in the disc space, each cavity extending from the anterior aspect of
`
`the disc space toward the posterior aspect of the disc space, or in other words, each of
`
`these cavities lies in an “anteroposterior” orientation, as illustrated in Figure 2 of my
`
`paper, copied below:
`
`
`
`10
`
`
`
`
`
`11
`
`My 1982 paper then describes that the two parallel cavities may be filled with
`
`autogenous bone grafts or “dowels” obtained from the patient’s iliac crest. My 1982
`
`paper states that the dowels from the iliac crest were cut to be one size larger than the
`
`dowel cavities to ensure a proper fit. See my 1982 paper, at p. 160. My 1982 paper
`
`further describes the use of iliac crest grafts with three cortical faces, as illustrated in
`
`Figure 4, and also describes the use of purely cancellous grafts. See my 1982 paper, at
`
`pp. 160-61. In the case of purely cancellous bone grafts, these too would be harvested
`
`from the patient’s iliac crest, albeit from a location more posterior than the location
`
`shown in Figure 4. My 1982 paper notes that the purely cancellous grafts are liable to
`
`invasion by disc remnants, thus predisposing to non—union. See my 1982, at p. 161.
`
`My 1982 paper also describes, specifically with respect to fusions in the L4/L5 disc
`
`space, that the great vessels may be retracted towards the midline from the anterolateral
`
`surface of the L4/L5 disc space. See my paper, at p. 169. This is done because the
`
`typical location of the great vessels (running down the midline) makes a directly
`
`anterior placement of the two parallel cavities difficult or impossible. See my 1983
`
`book, at p. 79, Fig. 2.44a (illustrating the great vessels running down the anterior
`
`midline of the spinal column at the LA/LS disc space). As such, for the L4/L5 disc
`
`space, the two grafts would be introduced into the disc space from a location that is
`
`offset from the anterior midline, toward the anterolateral surface of the disc space. See
`
`my 1983 book, at p. 80, Fig. 2.46a and b; see also my 1993 book, at p. 73, Fig. 2.25:
`
`
`
`11
`
`
`
`
`
`12
`
`
`
`Figure 2.25
`
`Again, the reason for the different positioning as shown in Figure 2.25 of my 1993
`
`book for the L4/L5 disc space (top) as compared to the L5/Sl disc space (bottom), is
`
`due to the location of the great vessels. See my 1993 book, at page 95, Figure 2.50a.
`
`In particular, the bifurcation of the great vessels above the L5/Sl disc space enables a
`
`more central, or midline, anterior introduction of the implants in the L5/Sl location (as
`
`shown in Fig. 2.25 of my 1993 book copied above), whereas the central anterior
`
`location of the vessels above L5/Sl requires a more oblique, or anterolateral, trajectory
`
`to the disc space (as is also shown in Fig. 2.25 of my 1993 book copied above).
`
`Direct Lateral Approaches Described in My 1982 Paper
`
`I used direct lateral approaches for lumbar interbody fusion as described in my 1982
`
`paper, where possible, because the use of a lateral approach in the upper lumbar region
`
`was preferred given it avoids contact with the great vessels.
`
`I also used direct lateral
`
`approaches for interbody fusion in the lower lumbar region where it was not possible to
`
`perform the procedure using an anterior approach, for example, in patients with Grade
`
`2 spondylolisthesis, as shown in Figures 7A and 7B of my 1982 paper.
`/'—
`
`12
`
`
`
`
`
`13
`
`My 1982 paper describes, for those procedures where a direct lateral approach is used
`
`(for example, the rarer upper lumbar fusions), that the patient is placed in the lateral
`
`decubitus position on the operating table with the left loin uppermost. See my 1982
`
`paper, at pp. 158, 159. For the lateral approaches to the Ll/L2 or L2/L3 disc space, I
`
`would form an “incision running through the bed of the twelfth rib to allow extra—
`
`peritoneal exposure of the upper lumbar vertebral column.” See my 1982 paper, at p.
`
`159; see also my 1983 book, at p. 74; my 1993 book, at p. 88. This twelfth rib incision
`
`is one that is known in other fields of surgery, for example to access the kidney, and the
`
`incision runs straight along the twelfth rib, from anterior of a direct lateral position to
`
`posterior of a direct lateral position. As such, the twelfth rib incision allows a direct
`
`lateral trajectory to the spine. For the lateral approaches to the L3/L4 disc space, my
`
`1982 paper describes that the incision would be similar to the incision used for the
`
`L4/L5 and L5/S1 access, namely, an oblique incision on the left side of the patient,
`
`commencing at the midline between the umbilicus and symphysis pubis (although
`
`nearer to the umbilicus for the L3/L4 approach) and extending upwards and laterally
`
`parallel to the level of the iliac crest. See my 1982 paper, at p. 158. As such, this
`
`incision allows a direct lateral trajectory to the L3/L4 disc space.
`
`My 1982 paper also describes that, after direct lateral access to the disc space is made,
`
`two parallel dowel cavities would be cut into the disc space, and those cavities are
`
`oriented “transversely.” By “transversely,” I meant lying in the transverse plane, and
`
`as such, by saying that the cavities are oriented transversely, that meant that they are
`
`oriented laterally, from side—to-side in the disc space, and not anterior—to—posterior.
`
`I
`
`would typically use a smaller-diameter, cervical-sized dowel cutting instrument for
`
`cutting the cavities in the lateral face of the disc space in the upper lumbar region. See
`
`my 1982 paper, at p. 159, Fig. 1 (showing the three dowel cutter sizes, with the smaller
`
`one on the left being the cervical-sized dowel cutter). Figure 3 of my 1982 paper (p.
`
`13
`
`
`
`
`
`14
`
`160) shows the lateral faces of adjacent vertebrae into which two parallel cavities have
`
`been formed:
`
`
`
`Figure 3 of my 1982 paper was drawn by an artist, Mr. Dale Howat, who I engaged to
`
`prepare many of the illustrations used in my publications. It was my normal practice at
`
`the time to have Mr. Howat prepare figures such as this in my presence, and we would
`
`work together to ensure that the figures illustrated what I intended them to illustrate.
`
`Figure 3 accurately makes a diagrammatic representation of what I intended Figure 3 to
`
`illustrate, namely, two cavities having been formed in the lateral face of the disc space.
`
`The purpose of Figure 3 was not to convey exact dimensions for a particular vertebra,
`
`although the dimensions of Figure 3 are generally accurate for typical vertebrae.
`
`Figure 3 of my 1982 paper was not included in my 1983 book or in my 1993 book.
`
`Although I do not have a specific recollection today as to why Figure 3 was not
`
`included in my 1983 and 1993 books, Iknow for certain that its omission was not
`
`because I or anyone else deemed the figure to be inaccurate. Indeed, I never have
`
`considered Figure 3 of my 1982 paper to be inaccurate, and do not consider Figure 3 to
`
`W awn/$7M,
`
`14
`
`
`
`
`
`15
`
`be inaccurate today. Until now, I have never had the accuracy of my drawings called
`
`into question.
`
`As discussed above, my 1982 paper describes that the two parallel cavities are filled
`
`with autogenous bone grafts or “dowels” including both cortical bone and cancellous
`
`bone, or alternatively, with purely cancellous bone grafts obtained from the patient’s
`
`iliac crest. See my 1982 paper, at pp. 160-61 and Figure 4. Such implants were
`
`effective, in my view, because the implants had cancellous bone in contact with the
`
`cancellous bone of the vertebrae. This enabled blood flow from the exposed cancellous
`
`bone of the vertebral bodies into the cancellous bone of the grafts, thereby facilitating
`
`bone growth and effective fusion. Vascular anatomy is one of my specialties and this
`
`biological View (vs. mechanical) of fusion is an outcropping of and consistent with my
`
`early work in this area. See, e.g., Crock et al., “The Blood Supply of the Vertebral
`
`Column and Spinal Cord in Man,” Springer-Verlag New York, 1977.
`
`In terms of sizing the implants, my 1982 paper describes that the dowels were typically
`
`cut from the iliac crest to be one size larger in diameter than the dowel cavities to
`
`ensure a proper fit. See my 1982 paper, at p. 160. My 1982 paper describes that the
`
`length of a dowel cavity is checked with a depth gauge and ruler. See 1982 paper, at p.
`
`161. The depths of the cavities are measured to make sure the grafts are long enough
`
`to fit the depth of the cavity. See also my 1993 book, at p. 97, Figure 2.51a, b
`
`(illustrating implants extending across the length of the cavity into which the implant is
`
`inserted). In the case of the lateral implants extending transversely, they were sized to
`
`occupy substantially the full transverse width of the two adjacent vertebrae.
`
`My 1982 paper states that grafts of 2.5 cm to 2.8 cm in depth are of satisfactory size in
`
`most patients. See 1982 paper, at p. 160. My experience was that this was typically
`
`true for the upper lumbar applications in which lateral implants were used. In some
`
`15
`
`
`
`
`
`16
`
`the iliac crest. In addition, given the shape of the iliac crest, while the longer dowels
`
`may include thinner distal portions of the iliac crest graft, I found these implants to be
`
`sufficiently strong to be safe and effective intervertebral implants and did not witness
`
`any post-operative subsidence of those dowels in those patients who received them via
`
`my direct lateral interbody fusion technique.
`
`Although my 1982 paper indicates my strong recommendation that autogenous bone
`
`grafts be used as the implant, I noted in my 1993 book that non-bone implants such as
`
`porous ceramic and titanium implants had by that time also been used by others as
`
`substitutes for autogenous interbody grafts. See my 1993 book, at p. 74.
`
`1982 Paper, Figures 7A and 7B: Lateral Approach Example
`
`Figures 7A and 7B of my 1982 paper (copied below) shows a roentgenogram of a
`
`specific case of an interbody implant that has been inserted “transversely,” using a
`
`direct lateral approach, such that the implant extends substantially the full transverse
`
`width of the two adjacent vertebrae. The 1982 paper notes that the patient here had
`
`Grade 2 spondylolisthesis at L4/L5 (lower lumbar), which means that the L4 vertebral
`
`body was “slipped” forward above the L5 vertebral body by approximately 50%. In
`
`this case (Grade 2 spondylolisthesis) I would have only used one graft, and the notation
`
`in the caption of the figure to “grafts” would seem to be incorrect. Also, given the
`
`Grade 2 spondylolisthesis condition, it would not have been possible to have inserted
`
`the implant using an anterior approach due to the degree of the “slip,” which was not
`
`corrected before the lateral graft was implanted. I therefore would have not used the
`
`anterior or anterolateral approach typically used at this level, but rather would have
`
`used a direct lateral approach. As such, the notation in the caption for Figures 7A and
`
`7B of “transversely” (that is, insertion in a transverse plane, or laterally from one side
`
`to the other in the disc space) is correct. Figures 7A and 7B of my 1982 paper
`
`16
`
`
`
`
`
`l7
`
`
`
`
`FIGS. 7A AND 78. (A) Lateral View roentgen-
`
`ogram of the lumbar spine in a 45-year-old man,
`
`showing Grade 2 spondylolisthesis at L44. (B)
`
`
`Interbody grafts have been inserted transversely
`
`(one year after operation).
`
`
`
`Figures 7A and 7B
`
`1993 Book, Figures 2.48a-c: Lateral Approach Example
`
`Figures 2.48a—c on page 93 of my 1993 book (also shown in my 1976 paper and in
`
`Figures 2.47a—b on page 81 of my 1983 book) disclose another example of a spinal
`
`fusion technique using a direct lateral approach, this one having been done in the L2/L3
`
`disc space. I specifically recall this patient (a Russian female residing in Australia),
`
`and specifically recall that I performed the procedure using a direct lateral approach,
`
`and placed the implant directly across substantially the full transverse width of the two
`
`adjacent vertebrae. This patient, unfortunately, had a complication called discitis due
`
`to a previous procedure at a different spinal level than where the lateral interbody
`
`fusion was done. The discitis was the result of a diagnostic procedure called a
`
`discography, which unfortunately created over-pressurization in an otherwise healthy
`
`disc that over time caused erosion of the disc into the adjacent vertebrae resulting in
`
`17
`
`
`
`
`
`1 8
`
`Postmortem histological investigation identified, not only the complication at a
`
`different disc level, but also showed that complete fusion in the L2/L3 disc space had
`
`not occurred as it should have. Through this investigation it became apparent that the
`
`incomplete union of the laterally placed cancellous graft was caused by the infiltration
`
`of disc renmants into the cancellous bone graft, which prevented the necessary blood
`
`flow into the graft to achieve fusion. The incomplete union was not determined to be
`
`the result of the use of the cancellous bone graft in and of itself, and it is not the case
`
`that insufficient strength of the cancellous bone graft resulted in fusion not being
`
`successfully achieved in this case. In other instances, the use of cancellous grafts
`
`placed laterally into the lumbar spine resulted in full fusion, which I suspect was due to
`
`more complete disc removal before the insertion of the cancellous grafts such that the
`
`vascular flow between the cancellous bone of the vertebral bodies and the cancellous
`
`bone of the graft was sufficient to enable the fusion process as desired.
`
`1993 Book, Figures 2.583-b: Lateral Approach Example
`
`Figures 2.58a—b on page 103 of my 1993 book (and also in my 1976 paper and in
`
`Figures 2.58a—b on page 92 of my 1983 book) disclose another example of a spinal
`
`fusion technique using a direct lateral approach, this one having been done in the L3/L4
`
`disc space. In this case, one instead of two parallel grafts was used, given the size of
`
`the disc space. This graft collapsed for the same reason that the graft discussed above
`
`and shown in Figures 2.48a-c of my 1993 book collapsed, namely, because of disc
`
`remnants having been left in the disc space, which prevented the necessary blood flow
`
`to achieve fusion. Again, the incomplete union and subsequent collapse in this case
`
`was not the result of the use of a cancellous bone graft in and of itself, and it is not the
`
`case that insufficient strength of the cancellous bone graft resulted in fusion not being
`
`successfully achieved in this case.
`
`SurgicalRecords Wm»)?, l/l/éflflé
`
`18
`
`
`
`
`
`19
`
`It is possible that surgical records may exist, but no such records are in my custody or
`
`control, and I have not attempted to obtain them. I did not feel it necessary to review
`
`any surgical records in order to provide my factual recollections set forth above, which
`
`were qualified in cases where my recollections were not clear. If any such surgical
`
`records exist, they may exist with the St. Vincent Hospital in Melbourne, Australia, or
`
`with certain other hospitals where I performed surgeries, including Hammersmith
`
`Hospital and Cromwell Hospital in London.
`
`Responses to Specific Statements About My Work And Publications
`
`Iunderstand that various opinions and statements have been made about lateral fusion
`
`techniques generally and about my publications in particular. Some of these opinions
`
`and statements are copied below. I will address each one in turn.
`
`I understand that the following testimony was given by Dr. Barton Sachs in a trial
`
`proceeding in the United States:
`
`Q. NOW DR. SACHS, IS IT THE CASE UNTIL 1995, NO SURGEON DID ANY
`
`SORT OF SPINAL FUSION PROCEDURE FROM A LATERAL APPROACH?
`
`A.
`
`I WOULD AGREE WITH THAT.
`
`I disagree with the statement in ‘][50 above made by Dr. Sachs because I performed
`
`spinal fusion procedures, including spinal interbody fusion procedures, from a lateral
`
`approach before 1995, and in fact did so as early as the 1970’s. Such procedures are
`
`documented in my 1982 paper, as well as my 1976 paper and my 1983 and 1993 books.
`
`I understand that US. Patent No. 5,860,973 to Dr. Gary Michelson (the ‘973 patent)
`
`makes the following statement: “In the past [prior to the filing of the patent, on June 7,
`
`1995], spinal fusion implants have been inserted only from either an anterior or
`
`posterior direction, from the front or the back of the patient,” and Dr. Barton Sachs
`
`19
`
`
`
`
`
`20
`
`Long before June 7, 1995, and in fact in the 1970’s, Ihad on multiple occasions
`
`inserted spinal fusion implants using a direct lateral approach and into the lateral aspect
`
`of the disc space, and I made such laterally inserted implants public in my 1982 paper
`
`and other publications.
`
`I understand that it has been contended that my 1982 paper does not disclose insertion
`
`of a spinal implant from the lateral aspect of the spine. This statement is incorrect.
`
`My 1982 paper, as well as my