Search court records - party Alan Herda, page 5

2027 Exhibit: EX2027 Kannan Heat transfer analy of canned food sterilization in still retort

Document PGR2024-00035, No. 2027 Exhibit - EX2027 Kannan Heat transfer analy of canned food sterilization in still retort (P.T.A.B. Mar. 12, 2025)

Ghani et al. (1999) carried out transient numerical simulations of natural convective heat- ing process in canned food sterilization and analyzed the slowest heating zone characteristics.

For this reason, mathematical modeling approach has been extensively applied to predict the tem- perature patterns in the thermal sterilization process (Teixeira et al., 1969; Naveh et al., 1983; Datta and Teixe- ira, 1987, 1988; Nicolai et al., 1998; Farid and Ghani, 2004).

The continuity equation is modiﬁed in an extension to the scheme adopted by Rhie and Chow Ghani et al. (1999) suggest that simulations based on uniform heating on all sides of the can with constant wall temperature are appropriate for a general purpose.

However, with increasing time, the heat ﬂux from the top wall surface declines rapidly due to attainment of higher temperatures inside the can at the upper regions.

Martynenko and Khramtsov (2005) propose a similar approach involving both Fourier and Rayleigh numbers for transient two dimensional heat transfer inside a com- pletely ﬁlled horizontal cylinder at aspect ratios exceeding 2.5.

Cite Document

Analyze

2023 Exhibit: EX2023 Cambridge Materials Data Book 2003

Document PGR2024-00035, No. 2023 Exhibit - EX2023 Cambridge Materials Data Book 2003 (P.T.A.B. Mar. 12, 2025)

It must be realised that many material properties (such as toughness) vary between wide limits depending on composition and previous treatment.

Cambridge Engineering Selector software (CES 4.1), 2003, Granta Design Limited, Rustat House, 62 Clifton Rd, Cambridge, CB1 7EG F Ashby, Materials Selection in Mechanical Design, 1999, Butterworth Heinemann F Ashby and D R H Jones, Engineering Materials, Vol.

σπ ICG ) are only valid when conditions for linear elastic fracture mechanics ICK (and Note that apply (typically the crack length and specimen dimensions must be at least 50 times the process zone size).

 σ∆σ∆ − = o σ ts Miner’s Rule for cumulative damage (for i loading blocks, each of constant stress amplitude and iN cycles): duration Paris’ crack growth law:

For many 1D problems of diffusion and heat flow, the solution for concentration or temperature depends on the error function, erf :

Cite Document

Analyze