`Case 6:12—cv—OO799—JRG Document 92-16 Filed 12/11/13 Page 1 of 3 Page|D #: 2540
`
`EXHIBIT P
`
`EXHIBIT P
`
`
`
`Case 6:12-cv-00799-JRG Document 92-16 Filed 12/11/13 Page 2 of 3 PageID #: 2541
`FLOW LIFECYCLE SERVICES
`
`ON-SITE FLOW CALIBRATION SERVICE
`Long-term Stability and Measurement Accuracy
`
`\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\v
`
`EMERSON
`
`Fiewservices
`
`Emerson’s On-Site Flow Calibration Service offers re-calibration of
`Micro Motion® Coriolis fl owmeters and Rosemount® Magnetic or
`Vortex fl owmeters.
`
`On-Site Flow Calibration Service Benefits:
`
`• Fast service with quick calibration turnaround
`• Certifi ed Flow Field Service technicians diagnose and verify
`calibration against factory specifi cations
`• Calibration certifi cate provided for your records
`• Calibrated using NIST-traceable Micro Motion Coriolis
`Reference Meters
`• Minimize process and equipment downtime
`• Calibration for liquid fl owmeters up to 3-inch line size
`
`WHAT IF...
`
`You cannot shutdown
`your process for any
`length of time?
`
`You require an annual
`re-calibration to
`meet regulatory
`requirements?
`
`You need to verify
`your measurement
`accuracy?
`
`With On-Site
`Calibration Service,
`fl owmeters can be
`calibrated in-situ or on
`site and returned to
`service quickly.
`
`EMERSON.
`Process Management
`
`
`
`Case 6:12-cv-00799-JRG Document 92-16 Filed 12/11/13 Page 3 of 3 PageID #: 2542
`
`ON-SITE CALIBRATION
`
`On-Site Flow Calibration Service
`
`Emerson’s Certifi ed Flow Field Service technician will assess the
`calibration requirements to determine whether the fl owmeters
`can be successfully calibrated on-site while operating within safe
`parameters. The following information is needed to assess the
`calibration job:
`
`• What is the uncertainty required?
`• What is the meter type, size & manufacturer?
`• What traceability is required?
`• Will the meter be calibrated in-situ or pulled from the process?
`• What fl ow rates are required for calibration?
`• What is the process fl uid? Do you have a MSDS?
`• Meter location? Is it in a safe area? Is a hot permit required?
`• Are the meters readily accessible?
`• Are there access taps for plumbing a reference meter into the line?
`• What fi ttings / hoses are required to plumb into the process?
`•
`Is there any special training required to work on-site?
`
`
`Based upon the results of this assessment, the Flow Field Service technician can provide a quote for
`our calibration services.
`
` Emerson Process Management
`
` To Schedule an Assessment Contact:
` North American Response Center
` 1-800-654-7768
`
`www.MicroMotion.com
`www.Rosemount.com
`
`+ EMERSON CERTIFIED. TRUST THE INDUSTRY LEADER.
`
`When you invest in Emerson devices, you expect a higher level of performance.
`You can expect the same from Emerson’s factory-certifi ed Lifecycle Services
`technicians for all diagnostics, fi eld service and repair. With an expanding
`network of service centers, rest assured we are where you need us, when you
`need us.
`
`MC-001828 Rev C
`
`10/2013
`
`© The Emerson logo is a trademark and service mark of Emerson Electric Co.
`All other marks are property of their respective owners.
`© Emerson Electric Co. All rights reserved.
`
`4
`
`EMERSON
`Process Management