UNITED STATES PATENT AND TRADEMARK OFFICE
`
`_____________________
`
`BEFORE THE PATENT TRIAL AND APPEAL BOARD
`
`_____________________
`
`TCL INDUSTRIES HOLDINGS CO., HISENSE CO., LTD., and ZYXEL
`COMMUNICATIONS CORP.
`Petitioners,
`
`v.
`
`PARKERVISION, INC.
`Patent Owner
`
`___________________________
`
`Case No. 2021 IPR-
`
`___________________________
`
`DECLARATION OF MATTHEW B. SHOEMAKE, PH.D.
`
`REGARDING U.S. PATENT NO. 7,292,835
`
`00985
`
`LG Ex. 1002
`LG Electronics Inc. v. ParkerVision, Inc.
`IPR2022-00246
`Page 00001
`
`

`

`I, Matthew B. Shoemake, Ph.D., do hereby declare and state, that all
`
`statements are made herein of my own knowledge are true and that all statements
`
`made on information and belief are believed to be true.
`
`I am over the age of 21
`
`and am competent to make this declaration. These statements were made with the
`
`knowledge that willfill false statements are punishable by fine or imprisonment, or
`
`both, under Section 1001 of Title 18 of the United States Code.
`
`Dated: May 17, 2021 W
`
`Matthew B. Shoemake, Ph.D.
`
`TCL, Hisense & ZyXel
`Ex. 1002
`
`Page 2
`
`IPR2022-00246 Page 00002
`
`

`

`
`
`TABLE OF CONTENTS
`
`I.
`
`QUALIFICATIONS ........................................................................................ 1
`
`II. MATERIALS REVIEWED .......................................................................... 10
`
`III. PERSON OF ORDINARY SKILL IN THE ART ........................................ 10
`
`IV. STANDARDS OF ANTICIPATION AND OBVIOUSNESS ..................... 12
`
`V.
`
`BRIEF SUMMARY OF OPINIONS ............................................................ 23
`
`A.
`
`B.
`
`C.
`
`D.
`
`The ’835 Patent ................................................................................... 23
`
`The Claims are Obvious Over Hulkko in View of Gibson ................. 27
`
`The Claims Are Obvious Over Gibson in View of Schiltz ................. 32
`
`Claim 1 Preamble: “Cable Modem” ................................................... 35
`
`VI. BACKGROUND TECHNOLOGY ............................................................... 38
`
`A. Wireless Communications Signals ...................................................... 38
`
`B.
`
`“Modulating” Signals for Wireless Communications ......................... 39
`
`1.
`
`2.
`
`3.
`
`Amplitude Modulation .........................................................................40
`
`Phase Modulation ..................................................................................41
`
`Quadrature Amplitude Modulation (“QAM”) ...............................42
`
`VII. OVERVIEW OF THE ’835 PATENT .......................................................... 45
`
`A. Alleged Problem .................................................................................. 45
`
`B. Alleged Invention ................................................................................ 45
`
`C.
`
`The Examiner Did Not Consider or Analyze the Primary Prior Art
`References Presented in the Petition During Original Prosecution .... 50
`
`VIII. CLAIM CONSTRUCTION .......................................................................... 51
`
`A.
`
`“cable modem” (Claim 1, Preamble) .................................................. 51
`
`ii
`
`IPR2022-00246 Page 00003
`
`

`

`B.
`
`C.
`
`“frequency translation module” (Claims 1, 18) .................................. 52
`
`“storage module” (Claims 1, 18) ......................................................... 54
`
`IX. OVERVIEW OF THE PRIOR ART REFERENCES ................................... 55
`
`A.
`
`B.
`
`C.
`
`D.
`
`E.
`
`F.
`
`Hulkko (Ex. 1004) ............................................................................... 55
`
`Gibson (Ex. 1005) ............................................................................... 58
`
`Schiltz (Ex. 1006) ................................................................................ 59
`
`DOCSIS References (Goldberg (Ex. 1007), Thacker (Ex. 1008)) ..... 61
`
`ITU-T J.83b (Ex. 1009) ....................................................................... 62
`
`Applicant Admitted Prior Art (“AAPA”) ........................................... 63
`
`G. Motivation to Combine ....................................................................... 64
`
`1.
`
`2.
`
`3.
`
`Ground 1: Hulkko in View of Gibson..............................................64
`
`Ground 2: Gibson in View of Schiltz ...............................................66
`
`“Cable Modem” .....................................................................................68
`
`X.
`
`SPECIFIC GROUNDS FOR PETITION ...................................................... 70
`
`A.
`
`Ground I: Claims 1, 12, 15, and 17 are Obvious Over Hulkko in
`View of Gibson ................................................................................... 70
`
`1.
`
`Claim 1 .....................................................................................................70
`
`(a)
`
`(b)
`
`(c)
`
`Element [1 preamble]: “A cable modem for down-
`converting an electromagnetic signal having complex
`modulations, comprising” ...............................................70
`Element [1A]: “an oscillator to generate an in-phase
`oscillating signal” ...........................................................72
`Element [1B]: “a phase shifter to receive said in-
`phase oscillating signal and to create a quadrature-
`phase oscillating signal” .................................................73
`
`iii
`
`IPR2022-00246 Page 00004
`
`

`

`
`
`(e)
`
`(f)
`
`(d) Element [1C]: “a first frequency down-conversion
`module to receive the electromagnetic signal and said
`in-phase oscillating signal” .............................................76
`Element [1D]: “a second frequency down-conversion
`module to receive the electromagnetic signal and said
`quadrature-phase oscillating signal” ...............................77
`Element [1E]: “wherein said first frequency down-
`conversion module further comprises a first
`frequency translation module” .......................................78
`(g) Element [1F]: “and a first storage module” ...................80
`(h) Element [1G]: “wherein said first frequency down-
`conversion module samples the electromagnetic
`signal at a rate that is a function of said in-phase
`oscillating signal, thereby creating a first sampled
`signal” .............................................................................81
`Element [1H]: “said second frequency down-
`conversion module further comprises a second
`frequency translation module” .......................................83
`Element [1I]: “and a second storage module” ................83
`(j)
`(k) Element [1J]: “wherein said second frequency down-
`conversion module samples the electromagnetic
`signal at a rate that is a function of said quadrature-
`phase oscillating signal, thereby creating a second
`sampled signal” ..............................................................83
`
`(i)
`
`
`
`2.
`
`3.
`
`Claim 12: “The cable modem of claim 1, wherein said
`sampled signal is a first information output signal, and
`said second sampled signal is a second information output
`signal.” .....................................................................................................84
`
`Claim 15: “The cable modem of claim 1, further
`comprising a first filter receiving said first sampled signal
`and outputting a first filtered signal, and a second filter
`receiving said second sampled signal and outputting a
`second filtered signal.” ........................................................................85
`
`iv
`
`IPR2022-00246 Page 00005
`
`

`

`4.
`
`Claim 17: “The cable modem of claim 1, wherein the
`electromagnetic signal has been transmitted by a wireless
`method to the cable modem.” ............................................................86
`
`B.
`
`Ground II: Claims 1, 12-15, and 18-20 are Obvious Over Gibson
`in View of Schiltz ................................................................................ 88
`
`1.
`
`Claim 1 .....................................................................................................88
`
`(a)
`
`(b)
`
`(c)
`
`(d)
`
`(e)
`
`(f)
`
`(g)
`(h)
`
`(i)
`
`(j)
`
`Element [1 preamble]: “A cable modem for down-
`converting an electromagnetic signal having complex
`modulations, comprising” ...............................................88
`Element [1A]: “an oscillator to generate an in-phase
`oscillating signal” ...........................................................89
`Element [1B]: “a phase shifter to receive said in-
`phase oscillating signal and to create a quadrature-
`phase oscillating signal” .................................................90
`Element [1C]: “a first frequency down-conversion
`module to receive the electromagnetic signal and said
`in-phase oscillating signal” .............................................91
`Element [1D]: “a second frequency down-conversion
`module to receive the electromagnetic signal and said
`quadrature-phase oscillating signal” ...............................94
`Element [1E]: “wherein said first frequency down-
`conversion module further comprises a first
`frequency translation module” .......................................95
`Element [1F]: “and a first storage module” ...................96
`Element [1G]: “wherein said first frequency down-
`conversion module samples the electromagnetic
`signal at a rate that is a function of said in-phase
`oscillating signal, thereby creating a first sampled
`signal” .............................................................................97
`Element [1H]: “said second frequency down-
`conversion module further comprises a second
`frequency translation module” .......................................99
`Element [1I]: “and a second storage module” ..............100
`
`v
`
`IPR2022-00246 Page 00006
`
`

`

`
`
`
`
`(k) Element [1J]: “wherein said second frequency down-
`conversion module samples the electromagnetic
`signal at a rate that is a function of said quadrature-
`phase oscillating signal, thereby creating a second
`sampled signal” ............................................................100
`
`Claim 12: “The cable modem of claim 1, wherein said
`sampled signal is a first information output signal, and
`said second sampled signal is a second information output
`signal.” ...................................................................................................102
`
`Claim 13: “The cable modem of claim 1, further
`comprising a first amplifier receiving said first sampled
`signal and outputting a first amplified signal, and a second
`amplifier receiving said second sampled signal and
`outputting a second amplified signal.” ..........................................103
`
`Claim 14: “The cable modem of claim 13, further
`comprising a first filter receiving said first amplified
`signal and outputting a first filtered signal, and a second
`filter receiving said second amplified signal and outputting
`a second filtered signal.” ...................................................................104
`
`Claim 15: “The cable modem of claim 1, further
`comprising a first filter receiving said first sampled signal
`and outputting a first filtered signal, and a second filter
`receiving said second sampled signal and outputting a
`second filtered signal.” ......................................................................104
`
`Claim 17: “The cable modem of claim 1, wherein the
`electromagnetic signal has been transmitted by a wireless
`method to the cable modem.” ..........................................................104
`
`2.
`
`3.
`
`4.
`
`5.
`
`6.
`
`7.
`
`Claim 18 ................................................................................................105
`
`(a)
`
`Element [18A]: “The cable modem of claim 1,
`wherein said first frequency translation module
`comprises a first switch coupled to said first storage
`module, and said second frequency translation
`module comprises a second switch coupled to said
`second storage module” ................................................105
`
`vi
`
`IPR2022-00246 Page 00007
`
`

`

`
`
`(b) Element [18B]: “and wherein said first frequency
`down-conversion module further comprises a first
`control signal generator coupled to said first switch
`and coupled to receive said in-phase oscillating
`signal” ...........................................................................105
`Element [18C]: “and said second frequency down-
`conversion module further comprises a second
`control signal generator coupled to said second
`switch and coupled to receive said quadrature-phase
`oscillating signal.” ........................................................105
`
`(c)
`
`Claim 19: “The cable modem of claim 18, wherein each of
`said first and second switches comprises: a first port; a
`second port; and a third port.” ..........................................................106
`
`Claim 20: “The cable modem of claim 19, wherein said
`first port of said first switch receives the electromagnetic
`signal, said second port of said first switch receives a first
`control signal generated by said first control signal
`generator, and said third port of said first switch is coupled
`to said first storage device, and wherein said first port of
`said second switch receives the electromagnetic signal,
`said second port of said second switch receives a second
`control signal generated by said second control signal
`generator, and said third port of said second switch is
`coupled to said second storage device.” ........................................107
`
`
`
`8.
`
`9.
`
`XI. CONCLUSION ............................................................................................ 107
`
`
`
`
`vii
`
`IPR2022-00246 Page 00008
`
`

`

`I.
`
`QUALIFICATIONS
`
`1.
`
`I, Matthew B. Shoemake, Ph.D., submit this declaration in support of
`
`TCL Industries Holdings Co., Ltd., ZyXEL Communications Corp., and Hisense
`
`Co., Ltd. (“Petitioners”) Petition for inter partes review (“IPR”) of claims 1, 12,
`
`13, 14, 15, 17, 18, 19, 20 (“the challenged claims”) of USPN 7,292,835 (“the ’835
`
`patent”) (Ex. 1001). I understand that the ’835 patent is currently owned by
`
`ParkerVision, Inc., (“Patent Owner”).
`
`2.
`
`I have been asked to provide my opinion about the state of the art of
`
`the technology described in the ’835 patent and on the patentability of certain
`
`claims of this patent.
`
`3.
`
`The statements herein include my opinions and the bases for those
`
`opinions, which relate to the following documents:
`
`Exhibit
`
`Description
`
`1001
`
`U.S. Patent No. 7,292,835 (“the ‘835 patent”)
`
`1003
`
`Excerpts of ’835 patent File History
`
`1004
`
`U.S. Patent No. 5,734,683 (“Hulkko”)
`
`1005
`
`U.S. Patent No. 4,672,117 (“Gibson”)
`
`IPR2022-00246 Page 00009
`
`

`

`Exhibit
`
`Description
`
`1006
`
`U.S. Patent No. 5,339,459 (“Schiltz”)
`
`1007
`
`L. Goldberg, “MCNS/DOCSIS MAC Clears a Path for the Cable-
`Modem Invasion,” Electronic Design; Dec. 1, 1997; 45, 27;
`Materials Science & Engineering Collection pg. 69 (“Goldberg”)
`
`1008
`
`USPN 6,011,548 (“Thacker”)
`
`1009
`
`ITU-T J.83b Recommendation (April 1997) (“ITU-T J.83b”)
`
`1010
`
`Declaration of Brenda Ray
`
`1011
`
`Claim Construction Order, ParkerVision v. Intel, 20:cv-00108-ADA
`(W.D. Tex. January 26, 2021)
`
`4.
`
`Although I am being compensated for my time at a rate of $670 per
`
`hour in preparing this declaration, the opinions herein are my own. I have no stake
`
`in the outcome of this IPR proceeding. My compensation does not depend in any
`
`way on the outcome of Petitioner’s petition or this IPR proceeding.
`
`5.
`
`I graduated magna cum laude from Texas A&M University in 1994
`
`upon earning two bachelor’s degrees, one in Electrical Engineering and one in
`
`Computer Science. While at Texas A&M I took several classes on analog and RF
`
`design including the use of switched capacitors. I also took digital signal
`
`processing at Texas A&M.
`
`2
`
`IPR2022-00246 Page 00010
`
`

`

`
`
`6.
`
`I also earned a master’s degree and a Ph.D. in Electrical Engineering
`
`from Cornell University in 1997 and 1999, where my studies focused on
`
`communications systems, communication protocols, and information theory. While
`
`at Cornell I also was a teaching assistant for digital signal processing courses.
`
`7.
`
`I have almost 30 years of experience in a variety of technologies and
`
`industries related to communications systems. From 1991 to 1995, I worked as an
`
`intern in the Digital Signal Processing Group at Texas Instruments, Inc. in
`
`Stafford, Texas. I worked on both product engineering and applications
`
`engineering projects. Our DSP chips were used in a variety of products including
`
`wired and wireless communication systems.
`
`8.
`
`I was on the founding team of Alantro Communications, Inc.
`
`(“Alantro”), a manufacturer of semiconductor products that relate to
`
`communication systems. While employed by Alantro, I served as an engineer and
`
`engineering manager in the development of an HDSL2 modem, a cable modem, a
`
`2.4 GHz cordless phone, and Wi-Fi technologies. During that time, I was
`
`responsible for developing the digital baseband portions of physical layers; the
`
`portion of a communication system that is responsible for transmitting information
`
`over a physical medium, such as wire, fiber, or air; and successfully decoding the
`
`information at the receiver. I also worked on standardized interface technologies
`
`such as Ethernet (802.3) and USB. My team at Alantro worked on and pioneered
`
`3
`
`IPR2022-00246 Page 00011
`
`

`

`
`
`Wi-Fi technology, which was the foundation of the Wi-Fi product line offered by
`
`Texas Instruments. Texas Instruments acquired Alantro in 2000.
`
`9.
`
`After Texas Instruments acquired Alantro, I became the director of the
`
`Wireless Networking Branch in the Texas Instruments DSP Solutions R&D Center
`
`from 2000 to 2003. While manager of this group, I developed technologies for
`
`increasing throughput and quality of service in communications networks. I also
`
`worked with sister organizations including DSL and cable modem teams to
`
`integrate Wi-Fi into products such as home gateways.
`
`10.
`
`In 2003, I founded WiQuest Communications, Inc. and was the CEO
`
`from 2003 to 2008. At WiQuest, I developed and sold the world’s first wireless
`
`docking system for notebook computers and the world's first 1 Gbps ultra
`
`wideband chipset. Our products contained RF and analog circuitry for modulating
`
`and demodulating high-speed signals transmitted wirelessly.
`
`11. From 2008 to 2018 I was the CEO and Founder of Biscotti Inc., which
`
`designs high-definition, Wi-Fi-based video calling systems for the home and
`
`office. Biscotti was founded in 2008 for the purpose of enabling consumer-based
`
`video calling in the home. Biscotti’s products were awarded the 2012 CES
`
`Innovation award and have been featured on television’s The View as well as in
`
`numerous publications including The Financial Times, The Dallas Morning News,
`
`Mashable, EE Times, USA Today, PC World and Engadget. Biscotti cameras
`
`4
`
`IPR2022-00246 Page 00012
`
`

`

`provided secure audio/video communication. Biscotti’s cameras performed audio
`
`and video processing and included interfaces such as HDMI, Wi-Fi, Ethernet and
`
`IR. Biscotti products also use interchip communication technologies such as USB,
`
`I2C and I2S.
`
`12. Beginning in 2008, companies began calling on me to serve as an
`
`expert in patent litigation. I have testified in numerous cases related to
`
`communication networks as well as standards. After working as a sole proprietor
`
`for many years, I incorporated Peritum LLC in 2016. I continue my expert
`
`consulting work via Peritum today.
`
`13.
`
`I participated in the IEEE 802.11 standards development process
`
`between 1998 and 2004, including, but not limited to, through my participation in
`
`the IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11e, IEEE 802.11i and
`
`IEEE 802.11n standards development processes. I also made numerous
`
`presentations to the participants in the groups that developed the IEEE 802.11b,
`
`802.11g and 802.11n amendments. Based on those submissions, technologies of
`
`which I am an inventor were ultimately adopted into the IEEE 802.11b and
`
`802.11g amendments.
`
`14.
`
`I have personal experience with standard-setting meeting and with
`
`rules governing the conduct of meetings at standards-setting bodies. For example,
`
`I was a voting member of the IEEE 802.11 Working Group during critical votes
`
`5
`
`IPR2022-00246 Page 00013
`
`

`

`
`
`that were taken during the 802.11a, b, g, e, i, and n standards development
`
`processes. In September of 1999, I organized and hosted the IEEE 802.11
`
`Working Group meeting in Santa Rosa, California, the meeting at which IEEE
`
`802.11a (now Wi-Fi 1) and IEEE 802.11b (now Wi-Fi 2) were ratified. In January
`
`of 2001, I organized and hosted the IEEE 802.11 Working Group meeting in
`
`Dallas, Texas. I have continued to actively monitor the 802.11 development
`
`process through the years and periodically attend meetings today.
`
`15.
`
`I have years of experience with the rules and practices for chairing
`
`standard-setting meetings during the standardization process. Having heavily
`
`participated in the IEEE 802.11b standardization process, I was elected by the
`
`membership of the 802.11 Working Group to chair a Study Group to develop a
`
`high-rate extension to the IEEE 802.11b amendment, which ultimately became the
`
`IEEE 802.11g amendment (now Wi-Fi 3). This Study Group evolved into a Task
`
`Group (known as Task Group G, or TGg), which I also chaired.
`
`16. As Chairperson of Task Group G, I was responsible for leading all of
`
`the activities of Task Group G, including, among other things, ensuring
`
`compliance with standard-setting rules, processes, and procedures, including patent
`
`policies; being knowledgeable in both the standards process and parliamentary
`
`procedure; setting goals and deadlines; developing and publishing meeting
`
`agendas; calling meetings; entertaining motions; ensuring fairness in discussions,
`
`6
`
`IPR2022-00246 Page 00014
`
`

`

`
`
`including mediating discussions and seeking consensus; managing balloting;
`
`prioritizing work to best serve the group and its goals; fulfilling financial reporting
`
`requirements as appropriate; reporting on TGg status, work, and activities to the
`
`full 802.11 Working Group; interfacing with other Task Group chairs as
`
`appropriate; and delegating and assigning functions and subtasks of the group. I
`
`was the Chair of TGg from inception through ratification of the IEEE 802.11g
`
`amendment in 2003.
`
`17.
`
`In 2003, I was elected by the IEEE 802.11 Working Group members
`
`to be the Chairperson of the 802.11n Task Group (now Wi-Fi 4). In early 2004 I
`
`stepped down as chair of IEEE 802.11n to take a CEO position.
`
`18.
`
`I am an inventor of technology that was adopted as part of the 802.11
`
`standard (e.g., PBCC), including the 802.11b and 802.11g amendments.
`
`19. My familiarity with digital signal processing, communication systems
`
`and analog and RF design began while I was an undergraduate at Texas A&M
`
`University in College Station between 1989 and 1994. Further, during my
`
`undergraduate studies I was an intern at Texas Instruments’ Digital Signal
`
`Processor (DSP) group in Stafford, Texas. Texas Instruments’ DSP chips were
`
`used in multiple applications, including wireless digital communication systems.
`
`My study of communication theory continued from 1994 to 1999 while I was a
`
`graduate student at Cornell University.
`
`7
`
`IPR2022-00246 Page 00015
`
`

`

`
`
`20.
`
`I have actively programmed computers for over 40 years, having
`
`started programming in BASIC circa 1982. My programming expertise includes
`
`BASIC, C, C++, Pascal, Java, Swift, assembly languages, HTML, Matlab, UNIX
`
`shell scripts, and hardware description languages (HDL).
`
`21. Based on my study and work experience, I am aware of a wealth of
`
`work that relates to communication systems, protocols, standards and interfaces.
`
`Examples of previous work I am familiar with include channel access protocols,
`
`the OSI and TCP/IP networking models, datagram/frame/packet formatting
`
`techniques, automatic repeat request (ARQ) techniques, handshakes, RTS/CTS,
`
`detection and estimation theory, capabilities signaling, information theory
`
`including theoretical channel capacities and source coding, forward error control
`
`(FEC), IEEE 802.1, IEEE 802.3, IEEE 802.11, video communications, audio
`
`communications, general purpose and specialized processors, Bluetooth, CAN,
`
`USB, wireless USB, I2C, I2S, UARTs, DSL, cable modems, AM radio, FM radio,
`
`DVB, NSTC, ATSC, MPEG, MP3, h.264, binary convolutional codes, Reed
`
`Solomon codes, trellis codes, low-density parity-check codes, color space
`
`conversions, QAM, BPSK, QPSK, SSB, frequency translation, DC offset, carrier
`
`offset, LPC-10, G.711, G.722 and AAC. I am also familiar with various file
`
`formats including vCards, JSON, XML, and HTML as well as databases.
`
`8
`
`IPR2022-00246 Page 00016
`
`

`

`
`
`22.
`
`I have authored numerous publications in the field of wireless
`
`technology, including “Low Peak-to-Average Ratio Channel Estimation Sequences
`
`for MultiBand OFDM Systems” in EE Times, “High Performance Wireless
`
`Ethernet” in IEEE Communications Magazine, and various other articles in IEEE
`
`publications. I have presented papers at many IEEE and other meetings. I
`
`organized and hosted the September 1999 IEEE 802.11 meeting in Santa Rosa,
`
`California and the January 2002 meeting in Dallas, Texas. In March 2019 I gave
`
`an invited lecture as part of Texas A&M University’s Distinguished Speaker
`
`Series. The lecture was on the topic of LDPC coding for robust communication
`
`networks. I was recognized as a “leader and innovator” and recognized for my
`
`“many accomplishments as a researcher leader and scholar.”
`
`23. The IEEE 802.11g Task Group that I chaired received the Technology
`
`Excellence award in 2003 from PC Magazine for the protocols incorporated in the
`
`IEEE 802.11g amendment developed under my leadership.
`
`24. Companies I have founded won CES Innovations Awards in 2008 and
`
`2012 for OFDM-based wireless technology and Wi-Fi connected cameras,
`
`respectively.
`
`25.
`
`I am a named inventor on at least thirty-four patents.
`
`26.
`
`I served on the External Advisory Committee of the Texas A&M
`
`University Department of Electrical and Computer Engineering from 2006 to 2020.
`
`9
`
`IPR2022-00246 Page 00017
`
`

`

`
`
`27. A full list of my qualifications and experience is contained in my CV,
`
`which I attached as an Appendix to this report.
`
`II. MATERIALS REVIEWED
`
`28. My opinions are based on years of education, research and experience,
`
`as well as investigation and study of relevant materials. In forming my opinions, I
`
`have considered the materials identified in this declaration, including the Exhibits
`
`mentioned above.
`
`29.
`
`I may rely upon these materials and/or additional materials to respond
`
`to arguments raised by the Patent Owner. I may also consider additional documents
`
`and information in forming any necessary opinions—including documents that
`
`may not yet have been provided to me.
`
`30. My analysis of the materials produced in this proceeding is ongoing
`
`and I will continue to review any new material as it is provided. This declaration
`
`represents only those opinions I have formed to date. I reserve the right to revise,
`
`supplement, and/or amend my opinions stated herein based on new information
`
`and on my continuing analysis of the materials already provided.
`
`III. PERSON OF ORDINARY SKILL IN THE ART
`
`31.
`
`I have been informed that the ’835 patent and its claims, as well as the
`
`prior art, are interpreted the way a hypothetical person having ordinary skill in the
`
`relevant art would have interpreted these materials at the time of the invention. I
`
`10
`
`IPR2022-00246 Page 00018
`
`

`

`
`
`understand that the “time of the invention” in this IPR proceeding is the earliest
`
`“priority date” that the applicant for the ’835 patent claimed in the United States
`
`Patent & Trademark Office (“USPTO”). Here, the face of the patent indicates that
`
`the application claims priority to a provisional patent application filed January 28,
`
`2000. As mentioned above, I was conducting research in the relevant
`
`technological field at that time.
`
`32.
`
`In determining the characteristics of a person of ordinary skill in the
`
`art at the time of the claimed invention, I considered several things, including the
`
`factors discussed below, as well as (1) the levels of education and experience of the
`
`inventor and other persons actively working in the relevant field; (2) the types of
`
`problems encountered in the field; (3) prior art solutions to these problems; (4) the
`
`rapidity in which innovations are made; and (5) the sophistication of the relevant
`
`technology. I also placed myself back in the relevant time period and considered
`
`the individuals that I had worked with in the field.
`
`33.
`
`It is my opinion that a person having ordinary skill in the relevant art
`
`at the time of the invention (“POSITA”) would have been someone with at least an
`
`undergraduate degree in electrical engineering or a related subject and two or more
`
`years of experience in the fields of communication systems, signal processing
`
`and/or RF circuit design. Less work experience may be compensated by a higher
`
`level of education, such as a master’s degree.
`
`11
`
`IPR2022-00246 Page 00019
`
`

`

`
`
`34.
`
`I understand that a person of ordinary skill in the relevant art is a
`
`hypothetical person who is assumed to be aware of all the pertinent information
`
`that qualifies as prior art. He or she is a person of ordinary creativity, not an
`
`automaton. He or she makes inferences and takes creative steps. In addition, a
`
`person of ordinary skill recognizes that prior art items may have obvious uses
`
`beyond their primary purposes, and in many cases he or she will be able to fit the
`
`teachings of multiple pieces of prior art together like pieces of a puzzle.
`
`35.
`
`I am prepared to testify as an expert in this field and also as someone
`
`who had at least the knowledge of a person having ordinary skill in the art at the
`
`time of the claimed invention, and someone who worked with others that had at
`
`least the knowledge of a person having ordinary skill in the art at the time of the
`
`alleged invention.
`
`36. Unless otherwise stated, my statements below refer to the knowledge,
`
`beliefs and abilities of a person having ordinary skill with respect to the arts
`
`relevant to the ’835 patent at the time of the claimed invention.
`
`IV. STANDARDS OF ANTICIPATION AND OBVIOUSNESS
`
`37.
`
`I offer no opinions on the law. However, I have developed an
`
`understanding of several legal principles regarding invalidity of patent claims, and
`
`other relevant legal issues. I have applied this understanding in arriving at my
`
`stated opinions and conclusions in this declaration.
`
`12
`
`IPR2022-00246 Page 00020
`
`

`

`
`
`38.
`
`I understand that the ’835 patent contains independent and dependent
`
`claims. An independent claim is one that does not refer to other claims in the
`
`patent, and it must be read separately from the other claims to determine the scope
`
`of such a claim. On the other hand, a dependent claim refers to at least one other
`
`claim in the patent. Such a claim incorporates all of the elements of any claim to
`
`which the dependent claim refers, as well as the additional elements recited in the
`
`dependent claim itself.
`
`39.
`
`I understand that, for example in federal district court infringement
`
`actions, a claim in an issued patent is presumed to be valid. In such federal court
`
`actions, a patent claim can be “invalidated” upon a showing of clear and
`
`convincing evidence. This is not such an action.
`
`40. Rather, I understand that in an IPR proceeding like this one, the
`
`Petitioner(s) has the burden of proving a proposition of “unpatentability” by a
`
`“preponderance of the evidence.” I understand that preponderance of the evidence
`
`means the greater weight of evidence. In an IPR proceeding, the USPTO may
`
`cancel “as unpatentable” one or more claims of a patent on a ground that could be
`
`raised under section 102 or 103 of the Patent Act, and only on the basis of prior art
`
`consisting of patents or printed publications.
`
`41.
`
`I am informed that the patentability of the challenged claims in this
`
`proceeding are to be assessed under the pre-America Invents Act (“pre-AIA”)
`
`13
`
`IPR2022-00246 Page 00021
`
`

`

`
`
`section 102 and 103 of the Patent Act. References to section 102 or 103 herein
`
`refer to the pre-AIA versions of those statutes.
`
`42.
`
`I understand that section 102 deals with the “novelty” of patent
`
`claims. I understand that under section 102(a), a person is not entitled to a pa