`
`Using the Audio Function for Windows
`f"c.71 ~ ~ To use Mwave audio in Windows, open an audio application such as
`~ ~ ~ Media Player or Sound Recorder in the Windows Accessories
`group.
`
`Note:
`To use the Mwave audio features in To control the audio input or output, do the following:
`WIN-OSQ, install the Mwave DSP
`1 Select Mwave ThinkPad from Windows.
`support software for Windows in the
`full screen WIN-OSQ session .
`
`2 Select Audio Control. The following windows appears:
`
`To install the Mwave DSP support
`software:
`Chapter 7.
`
`GAMES , II WAVE
`
`MASTER!
`
`Controls Viewed·
`
`1...1!".@)Lll ■ ( Record I
`
`Treb le
`Bass
`O Tone Control
`
`I Mute ~
`
`:-.J:"": r.
`' -:J;-:
`I Mute I I Mute JI
`
`l l 0
`
`Chorus Reverb
`O Effects
`
`-~
`
`This window allows you to maintain control over volume, balance ,
`tone, and effects for all audio components and input sources. For
`more information, see Mwave Help in the Mwave ThinkPad window.
`
`Using the Audio Function for DOS
`
`The Mwave feature supports audio for DOS games through Sound
`Blaster support.
`
`To enable Sound Blaster support for DOS games:
`
`1 Type FASTCFG at the command prompt; then press Enter.
`
`The FASTCFG utility opens.
`
`2 Select Games; then select OK.
`
`54
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 72 of 127
`
`
`
`Using the Mwave Audio Function
`
`Solving a Memory Shortage Problem for Your Games
`
`If you do not have enough memory for your games, you should
`make a boot diskette before starting the DOS games. To make a
`boot diskette, do the following :
`
`1 Start DOS and insert a blank diskette into the diskette drive.
`
`2 Type MAKEBOOT at the DOS prompt; then press Enter.
`
`A boot diskette is created. Before starting your games, restart
`the computer with this boot diskette inserted in the diskette
`drive.
`
`Some sample files, such as the CONFIG.SYS file, are created on
`the boot diskette. You might need to modify these files by referring
`to the manuals that came with your games.
`
`Default Values for DOS Games Audio
`
`Most games automatically determine the 10 address, interrupt level
`{RQ), and OMA channel settings for the audio for DOS games. If
`the game asks for this information, specify the default settings for
`Sound Blaster as follows:
`
`10 Address
`IRQ
`DMA Channel
`
`220
`5
`
`ThinkPad Features program :
`Page 35.
`
`If you need to change these settings, use the ThinkPad Features
`program.
`
`Chapter 3. Operating Your Computer 55
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 73 of 127
`
`
`
`Using the Mwave Telephony Function
`
`Using the Telephony Function
`
`Note:
`In some countries, the Mwave
`telephony functions are only
`available with the DAMelephony Kit
`option installed . To install a
`DAMelephony Kit on the computer,
`see "Installing the DAMelephony
`Kit" on page 149 and the
`documentation that came with the
`option.
`
`The computer is equipped with a modemfax port on its side that
`connects a telephone cable. This section describes how to connect
`the cable to the computer, and it describes the telephony features
`that can be used for communication.
`
`Note - - - - - - - - - - - - - - - - - - - - - - - ,
`
`Non-US. users must run the Country Selection program (~
`the Mwave window after the Mwave installation is complete.
`pee page 58)
`
`) in
`
`CAUTION:
`Your computer can use only a public-switched telephone
`network f>STN). Do not use a PBX private branch exchange)
`or other digital telephone extension lines. Use of phone lines
`other than PSTN can damage your modem. If you are not sure
`which kind of phone line you are using, contact your telephone
`company. Many hotels or office buildings use digital telephone
`extension lines, so check before connecting the telephone
`cable in such places.
`
`To use the telephony functions, you need to connect a telephone line
`to your computer.
`
`~DANGER
`
`To avoid shock hazard, do not connect the cable to or
`disconnect the cable from the telephone outlet on the
`wall during electrical storms.
`
`56
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 74 of 127
`
`
`
`Using the Mwave Telephony Function
`
`When your computer has a modemfax port with a square
`receptacle, first connect the ferrite-core end (connector 1 ) of the
`telephone cable to the modemfax port; then connect the other end
`) to the telephone outlet on the wall.
`( 2
`
`Note:
`If you use both the computer and a
`telephone with one telephone cable,
`use the telephone cable supplied
`with your computer.
`If you use the DAA7relephony Kit
`(available as an option), see page
`151 .
`
`Important - - - - - - - - - - - - - - - - - -~
`
`Make sure you use the correct telephone line so your modem
`operates correctly. When you are:
`
`At home: Use an analog line, a standard household
`telephone.
`
`In your omce: Use a line connected to a fax machine or
`another modem.
`
`In a hotel: Request a room with a data or normal telephone
`line.
`
`Your RJ11 jack must be wired for an analog line. If you are not
`sure what type of line you are connecting, check with the
`telephone company.
`
`Using the Modem with 0S2
`
`To start the Mwave modem with 0S2 Warp, do the following :
`
`1 Open the Mwave ThinkPad folder.
`
`2 Double-click on the Mwave Modem icon.
`
`The Mwave modem starts automatically.
`
`3 Start your communication program.
`
`Chapter 3. Operating Your Computer 57
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 75 of 127
`
`
`
`Using the Mwave Telephony Function
`
`Using the Modem with DOS
`
`To start the Mwave modem with DOS, do the following:
`
`1 Type FASTCFG at the DOS prompt; then press Enter.
`
`The FASTCFG utility opens.
`
`2 Select Advanced Modem; then select OK.
`
`3 Start your communication program.
`
`Using the Modem with Windows
`
`When you start Windows, the Mwave modem automatically starts
`and will be ready to use.
`
`Using Country Selection
`
`Important - - - - - - - - - - - - - - - - - -~
`
`Each country has restrictions on communication that uses
`telephone lines. Use this window whenever you travel to other
`countries.
`
`The Country Selection window allows you to change the country
`name currently supported by the Mwave telephony features. When
`you travel to other countries and use the Mwave telephony function,
`you need to select the country name from the list of countries in this
`window.
`
`58
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 76 of 127
`
`
`
`Using the ESS AudioDrive Sound feature
`
`Using the ESS AudioDrive Sound feature
`
`~ This section provides information about the audio functions
`ESS supported by the ESS AudioDrive Sound feature. The ESS
`AudioDrive supports for Sound Blaster Pro applications.
`
`Note:
`Do not enter suspend mode when
`using the audio functions.
`
`Using the Audio Function for OSP
`
`The ESS AudioDrive feature supports audio in the 0S2 environment
`through the Multimedia Presentation Manager2 l\,'1MPM2). To use
`the ESS AudioDrive functions with 0S2, open the Multimedia folder
`from the 0S2 desktop.
`
`Using the Audio Function for Windows
`
`To use ESS AudioDrive in Windows , click on the Audio
`Applications icon in the Main Program group. The following screen
`appears:
`
`Audio Applications
`
`fl ■ Ii
`
`Volume Con trol
`
`Mixer
`
`Recording
`Control
`
`Chapter 3. Operating Your Computer 59
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 77 of 127
`
`
`
`Using the MIDI/Joystick Port
`
`Using the MIDI/Joystick Port
`
`The Enhanced Video model provides a MIDIJoystick port on the rear
`of the computer for MIDI (nusical instrument digital interface)
`equipment or a joystick for playing games. A MIDIJoystick cable is
`supplied with the computer to connect a joystick. When connecting
`MIDI equipment, you have to purchase a MIDI connector to connect
`musical instruments with MIDI ports.
`
`To attach the MIDIJoystick cable to the computer:
`
`1 Turn off the computer and connect the MIDIJoystick cable to
`the computer as shown:
`
`2 Connect the other side of the cable to a MINI-DIN cable or a
`connector that connects to your MIDI equipment or joystick.
`
`3 Enable the MIDIJoystick port using the ThinkPad Features
`program:
`
`a) Start the ThinkPad Features program.
`
`b) Select the MIDI/joystick (
`
`) icon.
`
`c) Click on Enable for MIDI or joystick; then click on OK.
`
`d) Restart the computer.
`
`60
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 78 of 127
`
`
`
`How to Attach a Television to the Computer
`
`Attaching a Television to the Computer
`
`~ You can attach a television (NTSC or PAL) to the computer and
`display the computer output on it.
`
`To display the computer output on the attached television, do the
`following:
`
`1 Attach the television to the computer as follows:
`
`a) Turn off the computer and television.
`
`to the video-out port
`b) Connect the video in-out cable 2
`(□) 1 at the left side of the computer; then connect your
`television.
`
`1' n ;Aud;o-ln Le~
`v;deo In
`S-V;deo In I \-
`~ud;o-ln R;~ht
`Ir\~ ol/7 )
`4 - ,..--,.,,.~
`~of. y
`~ / wr
`
`To headphone jack
`of the computer
`
`Cables, except for the video in-out cable 2
`supplied with the computer.
`
`, are not
`
`If you are using video equipment with S-video input,
`connect the S-video port of the video in-out cable to the
`S-video-in connector of your video equipment ( A ) for
`better picture quality.
`
`Chapter 3. Operating Your Computer
`
`61
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 79 of 127
`
`
`
`How to Attach a Television to the Computer
`
`If you are not using video equipment with S-video input,
`connect the composite video port of the video in-out
`cable and the video-in connector of your video
`equipment ( B ).
`
`If your video equipment has only one audio input
`connector, use the left-audio connector on the audio
`cable.
`
`2 Enable the video-out port:
`
`a) Start the ThinkPad Features program. and select the
`
`Enhanced Video (
`
`) icon.
`
`b) Click on Enable Video-Out.
`Note - - - - - - - - - - - - - - - - - - - - ,
`
`Do not select Enable Video-out in the ThinkPad
`
`) screen ,
`Features program's Enhanced video (
`unless you have attached a television to the computer.
`
`Otherwise, the LCD screen becomes blank. In this
`case, use the Fn+F7 keys to restore the LCD screen.
`
`3 Select the appropriate television color standard: NTSC (default)
`or PAL. To do this, start the ThinkPad Features program and
`
`select the Enhanced video ( ~·~ ) icon; then select NTSC or
`PAL.
`
`4 Restart the computer to make the change effective, if you
`switch the color standard between NTSC and PAL.
`
`When you use a PAL television attached to the computer, you
`can select 800 x600 and 640 x480 resolution modes. When you
`use an NTSC television attached to the computer, you can
`select only 640 x480 resolution mode.
`
`62
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 80 of 127
`
`
`
`Note:
`Even if you selected television
`output, whenever you turn on the
`computer, its output is always
`displayed first on the LCD.
`
`Note:
`You cannot display the computer
`output on the LCD and television at
`the same time.
`
`How to Attach a Television to the Computer
`
`Switching Output between the LCD and the Television
`
`When you attached a television to the computer, you can select
`where to display computer output using:
`
`The Fn+F7 keys.
`
`The ThinkPad Features program:
`CRT dQ) for the television
`- LCD ( li;;JI) for the LCD
`Entering a PS2 sc command from the command prompt.
`For 0S2
`
`When you use 0S2 on a television attached to the computer, do
`not switch between a full-screen session and an 0S2
`Presentation Manager (PM) session: Otherwise, the screen will
`black out or be corrupted. To avoid this, switch to the LCD using
`the Fn+F7 keys, before you go to the full-screen session or
`return to the PM session . And then switch to the television.
`
`Chapter 3. Operating Your Computer 63
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 81 of 127
`
`
`
`How to Attach a Television to the Computer
`
`Displaying Output on the External SVGA Monitor
`
`Note - - - - - - - - - - - - - - - - - - - - -~
`
`You can attach both a television and an SVGA monitor to the
`computer; however, you can display the computer output on only
`one of the two at the same time. To switch between those two,
`you need to use the ThinkPad Features program.
`
`To display computer output on the attached external SVGA monitor
`after using the television, do the following:
`
`1 Turn off the computer and attach the SVGA monitor to the
`external-monitor connector at the rear of the computer.
`2 Turn on the computer and start the ThinkPad Features
`program.
`3 Click on the CRT d.Qb icon; then click on Enable External
`Display.
`
`64
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 82 of 127
`
`
`
`Using the Enhanced VideoMPEG Functions
`
`Using the Enhanced VideoMPEG Features
`
`The Enhanced Video feature provides the video overlaytapture and
`MPEG functions and video in-out port on the side of the computer to
`attach your home video equipment. It also provides the total image
`video with MPEG-1 and MPEG-2 HHR ~alt-horizontal resolution).
`
`With the Enhanced Video feature, you can take advantage of the
`following :
`
`MPEG playback: The MPEG playback viewer can play back
`many available CD-i movies, video CDs, and karaoke MPEG
`video titles. No DOSCD-i game titles are currently supported.
`MPEG2 titles are restricted to HHR at 4 Mbps.
`
`Video-in t,ideo capture):
`
`- Capture still images or motion video from the video-in port.
`- Overlay motion video from the video-in port.
`
`Video-out: To use the video-out function, see "Attaching a
`Television to the Computer" on page 61.
`
`When using the video overlaytapture and MPEG functions, keep the
`following in mind :
`
`You cannot enable or disable the Enhanced Video feature, or
`change from video-in to video-out, while the playback or capture
`window is open. Close the playback or capture window before
`you make changes.
`
`The MPEG playback and the video-in video capture) functions
`use the same hardware resources. Only one of the two
`functions can be used at the same time . For the same reason ,
`two MPEG functions cannot be used at the same time.
`
`Chapter 3. Operating Your Computer 65
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 83 of 127
`
`
`
`Using the Enhanced VideoMPEG Functions
`
`Using the Video OverlayCapture and MPEG Functions for
`052 Warp
`
`This section describes how to use the video overlaytapture and
`MPEG functions in OSQ.
`
`You need at least 12MB of memory to play MPEG or to capture
`video from the video-in port using Video IN.
`
`When reinstalling the video overlaytapture and MPEG device
`drivers, install Video IN from the BonusPak, preloaded on the
`computer, prior to the device drivers.
`
`When the Enhanced Video feature is enabled by the ThinkPad
`Features program, and any of the following is being played or
`used, do not enter suspend mode:
`
`- AVI file
`- MPEG file
`- Video CD
`- CD-i
`- Video-in feature
`
`Make sure you close the application that plays any of these files
`before entering suspend mode.
`
`Using the MPEG Playback for 0S2
`
`To use MPEG playback function in OSQ, open the Multimedia
`folder and do one of the following :
`
`When you want to play MPEG files:
`
`1 Select the Digital Video 3 icon, and click on File on the
`tool bar.
`2 Select Open to specify the MPEG file name.
`3 Select OK.
`
`66
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 84 of 127
`
`
`
`Using the Enhanced VideoMPEG Functions
`
`Note:
`The Video CD Player program
`cannot play some video CDs. If you
`cannot play your video CD, click on
`the Digital Video 3 icon instead;
`then follow the instructions on the
`screen.
`
`When you want to play a video CDs or CD-i movies from the
`CD-ROM drive of your computer, select the Video CD Player
`icon.
`
`MPEG under WIN-0S2
`
`WIN-0S2 does not support the playing of MPEG files.
`When you select IBM MPEG-2, MPEG Video, or CD-iWideoCD
`in the Device Driver folder of Media Player, the following error
`message might appear:
`
`IBM MPEG : This driver can NOT be loaded under
`
`in-OS2
`
`When you click on Video CD Player, the following error
`message appears:
`
`Win32s Error . ..
`
`Ignore any error messages; then click on OK to exit the error
`message screen .
`
`The following shows considerations when using the MPEG playback
`in 0S2 Warp:
`
`When you run other tasks while an MPEG file is being played,
`the MPEG file image might be distorted temporarily.
`
`The bar displaying the running time for the video CD might not
`be exact.
`
`You cannot play two MPEG files at the same time. Also, you
`cannot play the MPEG file while using the video-in function.
`If
`you try to do this, the following error message is displayed:
`
`Unable to open device 'IBM MPEG-enh Vid 3', use the
`Multimedia Set up pro gram t o ensure that the file
`is associated to a MMPM /2 dev ice .
`
`Using the Video-in Video Capture and Video Overlay) for OSIZ
`You can capture still images or motion video using video capture
`application Video IN supported by MMPM2, and the video-in port of
`the computer.
`
`Chapter 3. Operating Your Computer 67
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 85 of 127
`
`
`
`Using the Enhanced VideoMPEG Functions
`
`To capture motion video:
`1 Turn off the computer and connect the video in-out cable 2
`to
`the video-in port (G) 1 of the computer; then connect your
`video equipment.
`
`Cables, except for the video in-out cable 2
`with the computer.
`
`, are not supplied
`
`Video Out
`
`S-Video Out /
`
`Audio-Out Left
`r =
`/I
`Audio-Out Right
`Lo_ q_j _JI /
`~- ~,.~.,.====1V
`Jl
`
`m
`
`11
`
`9'-
`
`,,,
`
`To microphone jack
`of the computer
`
`If you are using video equipment with S-video output,
`connect the S-video port of the video in-out cable to the
`S-video-out connector of your video equipment A
`for
`better picture quality.
`
`If you are not using video equipment with S-video output,
`connect the composite video port of the video in-out cable
`and the video-out port of your video equipment B
`.
`
`If your video equipment has only one audio output
`connector, use the left-audio connector on the audio cable
`for connection .
`
`2 Check the Enhanced Video status.
`
`a) Open the ThinkPad Features program and select the
`
`Enhanced Video (
`
`) icon.
`
`68
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 86 of 127
`
`
`
`Using the Enhanced VideoMPEG Functions
`
`b) If Video captureMPEG status is enabled, go to step 4 on
`page 69.
`
`If not, continue to the next step.
`
`c) Click on Advanced; then click on the 1st IRQ list box and
`assign an IRQ for the device. (The default IRQ is 11 .)
`
`3 Restart the computer to make the IRQ setting take effect.
`
`4 Open the Multimedia folder in OS2.
`
`5 Click on the Video IN Recorder icon.
`
`For more information on how to use video-in function in OS2,
`use Help.
`Note - - - - - - - - - - - - - - - - - - -~
`
`When you use the video-in recorder in OS2, you can use
`only Ultimotion Real-Time Compression as the
`compression type. Other compression types are not
`supported even if they are listed on the screen .
`
`The following shows considerations when using the video-in feature
`or video capture in OS2:
`
`Only one capture window can be open at a time.
`
`Video-IN Recorder is an OS2 MMPM2 application for video
`capture and video overlay. Its video capture size (width and
`length) is limited to up to 320 x240 pixels (for a NTSC video
`source) or 384 x288 pixels (for a PAL video source).
`
`Also, largesize capture, for example, 640 x480 for NTSC or over
`768 x576 for PAL, might be not available with your computer.
`If
`you try capturing large images, the captured image will not look
`as expected , or the capture application will be suspended with
`the following error message:
`
`SWVR118: The recordi ng initia l ization fai l ed return code is
`5
`8 -
`s y stem out o f memo r y
`
`If you have this error message, close Video-IN; then restart it.
`Before trying again , set the capture size to a smaller one .
`
`Chapter 3. Operating Your Computer 69
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 87 of 127
`
`
`
`Using the Enhanced VideoMPEG Functions
`
`Common Restrictions for Video CaptureDver/ay and MPEG
`Playback
`
`You must be aware of the following when using the video
`capturebverlay functions or the MPEG playback functions.
`Otherwise, the video image might not be visible on the computer
`screen or the television, or the computer might become locked up or
`suspended. In these cases, close the Video-IN Recorder or Digital
`Video Player and restart it, or restart the computer.
`
`You can use only one video application at a time-for example,
`you cannot capture video while playing back an MPEG file.
`If
`you use multiple applications, an error message appears on the
`screen and the computer might become locked up or suspended.
`In that case, restart the computer.
`
`Do not enter suspend mode while attempting video capture or
`overlay.
`
`Do not use the Enhanced Video functions $uch as capturing or
`overlaying video using the Video-IN Recorder, or playing back
`the MPEG files using the Digital Video Player) in the following
`display modes:
`
`- 1024x 768 resolution, 256 color depth, and 75Hz refresh rate
`- 1024x 768, 65;i36, and 75Hz
`- all 1280x1024 resolution mode
`
`Otherwise, the image might be corrupted.
`
`Do not select virtual screen in the ThinkPad Features program.
`
`Video overlay and capture are not supported in virtual screen
`mode, such as 1024x 768 on an LCD or 800 x600 on a television.
`
`70
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 88 of 127
`
`
`
`Using the Enhanced VideoMPEG Functions
`
`Using the Video OverlayCapture and MPEG Functions for
`Windows 3.11 and Windows 95
`
`~ ~ This section describes how to use the video overlaytapture and
`~ ~ MPEG functions in Windows 3.11 and Windows 95.
`To use the MPEG playback in Windows 3. 11: See "Using the
`MPEG Playback for Windows 3.11 ."
`
`To use the MPEG playback in Windows 95: See "Using the
`MPEG Playback for Windows 95" on page 73.
`
`To use the video-in (tideo capture and overlay) in Windows 3. 11
`and Windows 95: See "Using the Video-in Video Capture and
`Video Overlay) for Windows 3.11 and Windows 95" on page 75.
`
`Using the MPEG Playback for Windows 3. 11
`
`8 To use MPEG playback in Microsoft Windows 3.11 , do the following :
`
`1 Open Media Player.
`
`WIN
`
`2 Click on Device.
`
`3 Do one of the following:
`
`When you want to play MPEG files, select IBM MPEG-2.
`
`When you want to play a movie or CD, select
`CD-iWideoCD .
`
`4 When you want to play a video CD or CD-i movie from the
`
`CD-ROM drive of your computer, click on the Play ([E] ) icon.
`Otherwise, select the MPEG file you want to play; then click on
`
`the Play ([B) icon .
`
`You can also use the IBM Video CD Player program to play a video
`CD or CD-i in Windows. For information on how to use this
`application, Help is available in the Video CD Player screen .
`
`Chapter 3. Operating Your Computer
`
`71
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 89 of 127
`
`
`
`Using the Enhanced VideoMPEG Functions
`
`The following are considerations when using the MPEG playback
`function in Windows 3.11:
`
`Smart drive caching of the CD-ROM drive
`To be able to play CD-i movies, do not cache the CD-ROM drive
`by the SMARTDRV Version 5.0 or 5.1, which is supplied with PC
`DOS Version 7.0.
`
`Video CD Player program
`
`- The chapter-control-related functions might not work with
`some karaoke CDs.
`
`- Check the following if you do not have enough audio volume
`with the Video CD Player program:
`
`- The audio volume of the Video CD Player program
`
`- The WAVE and MASTER volume control of the Mwave
`Audio Control menu
`
`- The speaker volume control on the computer
`
`Drive letter for MCf* video CDCD-i and Video CD Player
`To change the drive letter for MCI video CDCD-i and Video CD
`Player:
`
`1 Select Control Panel from the Main folder.
`2 Select Drivers.
`3 Select [MCI] CD-iWideoCD .
`4 Click on Setup.
`5 Change the drive letter.
`
`72
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 90 of 127
`
`
`
`Using the Enhanced VideoMPEG Functions
`
`Using the MPEG Playback for Windows 95
`
`~ The MPEG feature enables hardware to decode MPEG playback
`~ files under playback application programs.
`
`Important-Before Using Video CDs in Windows 95 - - - - - - - - - - - - - - -~
`
`When you play your video CDs, the playback speed might be slow or playback might stop
`intermittently. To get a smooth playback of video CDs, disable the current CD-ROM driver and
`install the CD-ROM driver for DOSX/Vindows. Do the following :
`
`1 Start Windows 95.
`2 Disable the 32-bit storage driver:
`a) Select My Computer, Control Panel, and then System.
`
`b) Click on the Performance tab; then click on the File System button.
`
`c) Click on the Troubleshooting tab.
`
`d) Check Disable all 32 bit protect-mode disk drivers.
`
`e) Click on Apply, OK, and then Close.
`
`f) Select Yes to the question "Do you want to restart your computer now?' to make the
`change effective.
`
`3 Install the CD-ROM device driver for DOSX/Vindows:
`
`a) Insert the ThinkPad CD-ROM Driver Diskette in the diskette drive.
`b} Select Start and Run.
`c) Type A: \ UINSTALL; then click on OK.
`d) Follow the instructions on the screen.
`e) After the installation is complete, remove the diskette; then restart the computer.
`
`You can play video CDs at a normal speed.
`
`Note: This procedure might cause the following:
`
`Some functional restrictions $uch as the auto sense function)
`Decreasing computer performance
`
`Chapter 3. Operating Your Computer 73
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 91 of 127
`
`
`
`Using the Enhanced VideoMPEG Functions
`
`To use MPEG playback in Windows 95, do the following:
`
`1 Open Media Player.
`
`2 Click on Device .
`
`3 Do one of the following :
`
`When you want to play MPEG files, select IBM MPEG-2.
`
`When you want to play a movie or CD, select
`CD-iWideoCD .
`
`4 When you want to play a video CD or CD-i movie from the
`
`CD-ROM drive of your computer, click on the Play ([E]) icon.
`Otherwise, select the MPEG file you want to play; then click on
`
`the Play ([E]) icon.
`
`You can also use the IBM Video CD Player program to play a video
`CD or CD-i in Windows. For information on how to use this
`application, Help is available in the Video CD Player screen .
`
`The following are considerations when using the MPEG playback
`function in Windows 95:
`
`CD-i support
`Windows 95 does not support playing of CD-i movies.
`
`Video CD Player program
`
`- The chapter-control-related functions might not work with
`some karaoke CDs.
`
`-
`
`If you do not have enough audio volume with the Video CD
`Player program, check:
`
`- The audio volume of the Video CD Player program
`- The WAVE and MASTER volume control of the Mwave
`Audio Control menu
`- The speaker volume control on the computer
`
`Drive letter for MCI Video CDCD-i and Video CD Player
`To change the drive letter for MCI video CDCD-i and Video CD
`Player:
`
`1 Select Control Panel from the My Computer folder.
`
`74
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 92 of 127
`
`
`
`Using the Enhanced VideoMPEG Functions
`
`2 Click on the Multimedia icon.
`
`3 Select Advanced.
`
`4 Click on Media control device.
`
`5 Click on [MCI] CD-iWideoCD .
`
`6 Confirm that "Use this Media Control device" is selected;
`then select Settings.
`
`7 Change the drive letter.
`
`Using the Video-in Video Capture and Video Overlay) for Windows
`3. 11 and Windows 95
`
`You can use the capture applications supported by Video for
`Windows** and your computer. You can also overlay motion video
`from the video-in port by using applications supported by MCI
`~edia Control Interface) overlay.
`
`Notes:
`
`Only one capture window can be open at a time.
`When you use video capture with the overlay screen on, the
`capturing screen might be distorted . However, the data is
`correctly captured.
`
`To capture motion video:
`
`1 Turn off the computer.
`2 Connect the video in-out cable 2
`to the video-in port (o) 1
`of the computer; then connect your video equipment.
`
`Chapter 3. Operating Your Computer 75
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 93 of 127
`
`
`
`Using the Enhanced VideoMPEG Functions
`
`Video Out
`S-Video Out /
`
`Audio-Out Left
`/i
`
`r\ o t d;o-017'
`
`~- ,.-,,.-,,.~
`
`.
`
`11
`
`"'-
`
`fL
`To microphone jack
`of the computer
`
`Cables, except for the video in-out cable 2
`supplied with the computer.
`
`, are not
`
`If you are using video equipment with S-video output,
`connect the S-video port of the video in-out cable to the
`S-video-out connector of your video equipment A
`for
`better picture quality.
`
`If you are not using video equipment with S-video output,
`connect the composite video port of the video in-out cable
`and the video-out port of your video equipment B
`.
`
`If your video equipment has only one audio output
`connector, use the left-audio connector on the audio cable
`for connection.
`
`3 Check the Enhanced Video status.
`
`a) Open the ThinkPad Features program.
`
`b) Select the Enhanced Video (
`
`) icon.
`
`c) If Video captureMPEG status is enabled, go to step 5 on
`page 77.
`
`If not, continue to the next step.
`
`76
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 94 of 127
`
`
`
`Using the Enhanced VideoMPEG Functions
`
`d) Click on Advanced.
`
`e) Click on the 1st IRQ list box and assign an IRQ for the
`device. (The default IRQ is 11.)
`
`4 Restart the computer to make the IRQ setting take effect.
`
`5 Start the video capturing application program.
`
`If you use the Digital Video Producer (DVP) program, see
`"Using the Digital Video Producer for Windows."
`
`If you use the Media Player, see "Using the Overlay with
`Media Player for Windows" on page 81.
`
`Using the Digital Video Producer for Windows
`
`~ ~ Digital Video Producer (DVP) is an application program that has the
`~ ~ following functions :
`Capturing, compressing, and building a video file
`Capturing a still image (see page 80)
`
`Capturing, Compressing, and Building a Video File
`
`This sample procedure describes how to capture a video clip, import
`it in DVP, and build a compressed .AVI file that you can use in a
`presentation and other computer-based materials. The video file
`created in this example has the following characteristics. (You need
`approximately 17MB of hard disk space to capture a video file.)
`
`Frame size
`
`Frame rate
`
`160 pels by 120 pels
`
`15 frames per second
`
`Number of seconds
`
`30 seconds
`
`Audio sampling rates 8-bit, 11.025 kHz, mono
`
`Important - - - - - - - - - - - - - - - - - -~
`
`Make sure your video source (such as a VCR or video camera) is
`correctly connected to your computer before you start the video
`capture. If you select overlay mode from the Options menu in
`DVP Capture, you can verify the connection and look at your
`video both before and during the capture.
`
`Chapter 3. Operating Your Computer
`
`77
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 95 of 127
`
`
`
`Using the Enhanced VideoMPEG Functions
`
`To capture, compress, and build a video file:
`
`1 Start DVP; then select Video Capture from the Tools menu.
`
`2 Select Set Capture File from the File menu.
`
`3 Enter a name for your capture file (such as CAPTURE.AV!) and
`specify the directory in which to save the file; then click on OK.
`
`4 Select Allocate File Space from the File menu and enter 17MB
`as the hard disk space to set aside for your capture file; then
`click on OK.
`
`5 Select Audio Format from the Options menu.
`
`6 Select these sound options: 8-bit, 11 kHz, and Mono. Then
`click on OK.
`
`7 Select Video Format from the Options menu.
`
`8 Select 160x120 for Image Dimensions and Overlay YUV422 or
`Compressed YUV422 for Image Format; then click on OK.
`
`9 Select Video Source from the Options menu, the type of video
`connector your video source uses (video or S-video), and the
`type of video signal (NTSC or PAL).
`
`To see the supported color standard list of countries, see the
`ThinkPad Features program help.
`
`10 Select Settings from the Capture menu and specify the