throbber
Using the Mwave Audio Function
`
`Using the Audio Function for Windows
`f"c.71 ~ ~ To use Mwave audio in Windows, open an audio application such as
`~ ~ ~ Media Player or Sound Recorder in the Windows Accessories
`group.
`
`Note:
`To use the Mwave audio features in To control the audio input or output, do the following:
`WIN-OSQ, install the Mwave DSP
`1 Select Mwave ThinkPad from Windows.
`support software for Windows in the
`full screen WIN-OSQ session .
`
`2 Select Audio Control. The following windows appears:
`
`To install the Mwave DSP support
`software:
`Chapter 7.
`
`GAMES , II WAVE
`
`MASTER!
`
`Controls Viewed·
`
`1...1!".@)Lll ■ ( Record I
`
`Treb le
`Bass
`O Tone Control
`
`I Mute ~
`
`:-.J:"": r.
`' -:J;-:
`I Mute I I Mute JI
`
`l l 0
`
`Chorus Reverb
`O Effects
`
`-~
`
`This window allows you to maintain control over volume, balance ,
`tone, and effects for all audio components and input sources. For
`more information, see Mwave Help in the Mwave ThinkPad window.
`
`Using the Audio Function for DOS
`
`The Mwave feature supports audio for DOS games through Sound
`Blaster support.
`
`To enable Sound Blaster support for DOS games:
`
`1 Type FASTCFG at the command prompt; then press Enter.
`
`The FASTCFG utility opens.
`
`2 Select Games; then select OK.
`
`54
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 72 of 127
`
`

`

`Using the Mwave Audio Function
`
`Solving a Memory Shortage Problem for Your Games
`
`If you do not have enough memory for your games, you should
`make a boot diskette before starting the DOS games. To make a
`boot diskette, do the following :
`
`1 Start DOS and insert a blank diskette into the diskette drive.
`
`2 Type MAKEBOOT at the DOS prompt; then press Enter.
`
`A boot diskette is created. Before starting your games, restart
`the computer with this boot diskette inserted in the diskette
`drive.
`
`Some sample files, such as the CONFIG.SYS file, are created on
`the boot diskette. You might need to modify these files by referring
`to the manuals that came with your games.
`
`Default Values for DOS Games Audio
`
`Most games automatically determine the 10 address, interrupt level
`{RQ), and OMA channel settings for the audio for DOS games. If
`the game asks for this information, specify the default settings for
`Sound Blaster as follows:
`
`10 Address
`IRQ
`DMA Channel
`
`220
`5
`
`ThinkPad Features program :
`Page 35.
`
`If you need to change these settings, use the ThinkPad Features
`program.
`
`Chapter 3. Operating Your Computer 55
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 73 of 127
`
`

`

`Using the Mwave Telephony Function
`
`Using the Telephony Function
`
`Note:
`In some countries, the Mwave
`telephony functions are only
`available with the DAMelephony Kit
`option installed . To install a
`DAMelephony Kit on the computer,
`see "Installing the DAMelephony
`Kit" on page 149 and the
`documentation that came with the
`option.
`
`The computer is equipped with a modemfax port on its side that
`connects a telephone cable. This section describes how to connect
`the cable to the computer, and it describes the telephony features
`that can be used for communication.
`
`Note - - - - - - - - - - - - - - - - - - - - - - - ,
`
`Non-US. users must run the Country Selection program (~
`the Mwave window after the Mwave installation is complete.
`pee page 58)
`
`) in
`
`CAUTION:
`Your computer can use only a public-switched telephone
`network f>STN). Do not use a PBX private branch exchange)
`or other digital telephone extension lines. Use of phone lines
`other than PSTN can damage your modem. If you are not sure
`which kind of phone line you are using, contact your telephone
`company. Many hotels or office buildings use digital telephone
`extension lines, so check before connecting the telephone
`cable in such places.
`
`To use the telephony functions, you need to connect a telephone line
`to your computer.
`
`~DANGER
`
`To avoid shock hazard, do not connect the cable to or
`disconnect the cable from the telephone outlet on the
`wall during electrical storms.
`
`56
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 74 of 127
`
`

`

`Using the Mwave Telephony Function
`
`When your computer has a modemfax port with a square
`receptacle, first connect the ferrite-core end (connector 1 ) of the
`telephone cable to the modemfax port; then connect the other end
`) to the telephone outlet on the wall.
`( 2
`
`Note:
`If you use both the computer and a
`telephone with one telephone cable,
`use the telephone cable supplied
`with your computer.
`If you use the DAA7relephony Kit
`(available as an option), see page
`151 .
`
`Important - - - - - - - - - - - - - - - - - -~
`
`Make sure you use the correct telephone line so your modem
`operates correctly. When you are:
`
`At home: Use an analog line, a standard household
`telephone.
`
`In your omce: Use a line connected to a fax machine or
`another modem.
`
`In a hotel: Request a room with a data or normal telephone
`line.
`
`Your RJ11 jack must be wired for an analog line. If you are not
`sure what type of line you are connecting, check with the
`telephone company.
`
`Using the Modem with 0S2
`
`To start the Mwave modem with 0S2 Warp, do the following :
`
`1 Open the Mwave ThinkPad folder.
`
`2 Double-click on the Mwave Modem icon.
`
`The Mwave modem starts automatically.
`
`3 Start your communication program.
`
`Chapter 3. Operating Your Computer 57
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 75 of 127
`
`

`

`Using the Mwave Telephony Function
`
`Using the Modem with DOS
`
`To start the Mwave modem with DOS, do the following:
`
`1 Type FASTCFG at the DOS prompt; then press Enter.
`
`The FASTCFG utility opens.
`
`2 Select Advanced Modem; then select OK.
`
`3 Start your communication program.
`
`Using the Modem with Windows
`
`When you start Windows, the Mwave modem automatically starts
`and will be ready to use.
`
`Using Country Selection
`
`Important - - - - - - - - - - - - - - - - - -~
`
`Each country has restrictions on communication that uses
`telephone lines. Use this window whenever you travel to other
`countries.
`
`The Country Selection window allows you to change the country
`name currently supported by the Mwave telephony features. When
`you travel to other countries and use the Mwave telephony function,
`you need to select the country name from the list of countries in this
`window.
`
`58
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 76 of 127
`
`

`

`Using the ESS AudioDrive Sound feature
`
`Using the ESS AudioDrive Sound feature
`
`~ This section provides information about the audio functions
`ESS supported by the ESS AudioDrive Sound feature. The ESS
`AudioDrive supports for Sound Blaster Pro applications.
`
`Note:
`Do not enter suspend mode when
`using the audio functions.
`
`Using the Audio Function for OSP
`
`The ESS AudioDrive feature supports audio in the 0S2 environment
`through the Multimedia Presentation Manager2 l\,'1MPM2). To use
`the ESS AudioDrive functions with 0S2, open the Multimedia folder
`from the 0S2 desktop.
`
`Using the Audio Function for Windows
`
`To use ESS AudioDrive in Windows , click on the Audio
`Applications icon in the Main Program group. The following screen
`appears:
`
`Audio Applications
`
`fl ■ Ii
`
`Volume Con trol
`
`Mixer
`
`Recording
`Control
`
`Chapter 3. Operating Your Computer 59
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 77 of 127
`
`

`

`Using the MIDI/Joystick Port
`
`Using the MIDI/Joystick Port
`
`The Enhanced Video model provides a MIDIJoystick port on the rear
`of the computer for MIDI (nusical instrument digital interface)
`equipment or a joystick for playing games. A MIDIJoystick cable is
`supplied with the computer to connect a joystick. When connecting
`MIDI equipment, you have to purchase a MIDI connector to connect
`musical instruments with MIDI ports.
`
`To attach the MIDIJoystick cable to the computer:
`
`1 Turn off the computer and connect the MIDIJoystick cable to
`the computer as shown:
`
`2 Connect the other side of the cable to a MINI-DIN cable or a
`connector that connects to your MIDI equipment or joystick.
`
`3 Enable the MIDIJoystick port using the ThinkPad Features
`program:
`
`a) Start the ThinkPad Features program.
`
`b) Select the MIDI/joystick (
`
`) icon.
`
`c) Click on Enable for MIDI or joystick; then click on OK.
`
`d) Restart the computer.
`
`60
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 78 of 127
`
`

`

`How to Attach a Television to the Computer
`
`Attaching a Television to the Computer
`
`~ You can attach a television (NTSC or PAL) to the computer and
`display the computer output on it.
`
`To display the computer output on the attached television, do the
`following:
`
`1 Attach the television to the computer as follows:
`
`a) Turn off the computer and television.
`
`to the video-out port
`b) Connect the video in-out cable 2
`(□) 1 at the left side of the computer; then connect your
`television.
`
`1' n ;Aud;o-ln Le~
`v;deo In
`S-V;deo In I \-
`~ud;o-ln R;~ht
`Ir\~ ol/7 )
`4 - ,..--,.,,.~
`~of. y
`~ / wr
`
`To headphone jack
`of the computer
`
`Cables, except for the video in-out cable 2
`supplied with the computer.
`
`, are not
`
`If you are using video equipment with S-video input,
`connect the S-video port of the video in-out cable to the
`S-video-in connector of your video equipment ( A ) for
`better picture quality.
`
`Chapter 3. Operating Your Computer
`
`61
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 79 of 127
`
`

`

`How to Attach a Television to the Computer
`
`If you are not using video equipment with S-video input,
`connect the composite video port of the video in-out
`cable and the video-in connector of your video
`equipment ( B ).
`
`If your video equipment has only one audio input
`connector, use the left-audio connector on the audio
`cable.
`
`2 Enable the video-out port:
`
`a) Start the ThinkPad Features program. and select the
`
`Enhanced Video (
`
`) icon.
`
`b) Click on Enable Video-Out.
`Note - - - - - - - - - - - - - - - - - - - - ,
`
`Do not select Enable Video-out in the ThinkPad
`
`) screen ,
`Features program's Enhanced video (
`unless you have attached a television to the computer.
`
`Otherwise, the LCD screen becomes blank. In this
`case, use the Fn+F7 keys to restore the LCD screen.
`
`3 Select the appropriate television color standard: NTSC (default)
`or PAL. To do this, start the ThinkPad Features program and
`
`select the Enhanced video ( ~·~ ) icon; then select NTSC or
`PAL.
`
`4 Restart the computer to make the change effective, if you
`switch the color standard between NTSC and PAL.
`
`When you use a PAL television attached to the computer, you
`can select 800 x600 and 640 x480 resolution modes. When you
`use an NTSC television attached to the computer, you can
`select only 640 x480 resolution mode.
`
`62
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 80 of 127
`
`

`

`Note:
`Even if you selected television
`output, whenever you turn on the
`computer, its output is always
`displayed first on the LCD.
`
`Note:
`You cannot display the computer
`output on the LCD and television at
`the same time.
`
`How to Attach a Television to the Computer
`
`Switching Output between the LCD and the Television
`
`When you attached a television to the computer, you can select
`where to display computer output using:
`
`The Fn+F7 keys.
`
`The ThinkPad Features program:
`CRT dQ) for the television
`- LCD ( li;;JI) for the LCD
`Entering a PS2 sc command from the command prompt.
`For 0S2
`
`When you use 0S2 on a television attached to the computer, do
`not switch between a full-screen session and an 0S2
`Presentation Manager (PM) session: Otherwise, the screen will
`black out or be corrupted. To avoid this, switch to the LCD using
`the Fn+F7 keys, before you go to the full-screen session or
`return to the PM session . And then switch to the television.
`
`Chapter 3. Operating Your Computer 63
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 81 of 127
`
`

`

`How to Attach a Television to the Computer
`
`Displaying Output on the External SVGA Monitor
`
`Note - - - - - - - - - - - - - - - - - - - - -~
`
`You can attach both a television and an SVGA monitor to the
`computer; however, you can display the computer output on only
`one of the two at the same time. To switch between those two,
`you need to use the ThinkPad Features program.
`
`To display computer output on the attached external SVGA monitor
`after using the television, do the following:
`
`1 Turn off the computer and attach the SVGA monitor to the
`external-monitor connector at the rear of the computer.
`2 Turn on the computer and start the ThinkPad Features
`program.
`3 Click on the CRT d.Qb icon; then click on Enable External
`Display.
`
`64
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 82 of 127
`
`

`

`Using the Enhanced VideoMPEG Functions
`
`Using the Enhanced VideoMPEG Features
`
`The Enhanced Video feature provides the video overlaytapture and
`MPEG functions and video in-out port on the side of the computer to
`attach your home video equipment. It also provides the total image
`video with MPEG-1 and MPEG-2 HHR ~alt-horizontal resolution).
`
`With the Enhanced Video feature, you can take advantage of the
`following :
`
`MPEG playback: The MPEG playback viewer can play back
`many available CD-i movies, video CDs, and karaoke MPEG
`video titles. No DOSCD-i game titles are currently supported.
`MPEG2 titles are restricted to HHR at 4 Mbps.
`
`Video-in t,ideo capture):
`
`- Capture still images or motion video from the video-in port.
`- Overlay motion video from the video-in port.
`
`Video-out: To use the video-out function, see "Attaching a
`Television to the Computer" on page 61.
`
`When using the video overlaytapture and MPEG functions, keep the
`following in mind :
`
`You cannot enable or disable the Enhanced Video feature, or
`change from video-in to video-out, while the playback or capture
`window is open. Close the playback or capture window before
`you make changes.
`
`The MPEG playback and the video-in video capture) functions
`use the same hardware resources. Only one of the two
`functions can be used at the same time . For the same reason ,
`two MPEG functions cannot be used at the same time.
`
`Chapter 3. Operating Your Computer 65
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 83 of 127
`
`

`

`Using the Enhanced VideoMPEG Functions
`
`Using the Video OverlayCapture and MPEG Functions for
`052 Warp
`
`This section describes how to use the video overlaytapture and
`MPEG functions in OSQ.
`
`You need at least 12MB of memory to play MPEG or to capture
`video from the video-in port using Video IN.
`
`When reinstalling the video overlaytapture and MPEG device
`drivers, install Video IN from the BonusPak, preloaded on the
`computer, prior to the device drivers.
`
`When the Enhanced Video feature is enabled by the ThinkPad
`Features program, and any of the following is being played or
`used, do not enter suspend mode:
`
`- AVI file
`- MPEG file
`- Video CD
`- CD-i
`- Video-in feature
`
`Make sure you close the application that plays any of these files
`before entering suspend mode.
`
`Using the MPEG Playback for 0S2
`
`To use MPEG playback function in OSQ, open the Multimedia
`folder and do one of the following :
`
`When you want to play MPEG files:
`
`1 Select the Digital Video 3 icon, and click on File on the
`tool bar.
`2 Select Open to specify the MPEG file name.
`3 Select OK.
`
`66
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 84 of 127
`
`

`

`Using the Enhanced VideoMPEG Functions
`
`Note:
`The Video CD Player program
`cannot play some video CDs. If you
`cannot play your video CD, click on
`the Digital Video 3 icon instead;
`then follow the instructions on the
`screen.
`
`When you want to play a video CDs or CD-i movies from the
`CD-ROM drive of your computer, select the Video CD Player
`icon.
`
`MPEG under WIN-0S2
`
`WIN-0S2 does not support the playing of MPEG files.
`When you select IBM MPEG-2, MPEG Video, or CD-iWideoCD
`in the Device Driver folder of Media Player, the following error
`message might appear:
`
`IBM MPEG : This driver can NOT be loaded under
`
`in-OS2
`
`When you click on Video CD Player, the following error
`message appears:
`
`Win32s Error . ..
`
`Ignore any error messages; then click on OK to exit the error
`message screen .
`
`The following shows considerations when using the MPEG playback
`in 0S2 Warp:
`
`When you run other tasks while an MPEG file is being played,
`the MPEG file image might be distorted temporarily.
`
`The bar displaying the running time for the video CD might not
`be exact.
`
`You cannot play two MPEG files at the same time. Also, you
`cannot play the MPEG file while using the video-in function.
`If
`you try to do this, the following error message is displayed:
`
`Unable to open device 'IBM MPEG-enh Vid 3', use the
`Multimedia Set up pro gram t o ensure that the file
`is associated to a MMPM /2 dev ice .
`
`Using the Video-in Video Capture and Video Overlay) for OSIZ
`You can capture still images or motion video using video capture
`application Video IN supported by MMPM2, and the video-in port of
`the computer.
`
`Chapter 3. Operating Your Computer 67
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 85 of 127
`
`

`

`Using the Enhanced VideoMPEG Functions
`
`To capture motion video:
`1 Turn off the computer and connect the video in-out cable 2
`to
`the video-in port (G) 1 of the computer; then connect your
`video equipment.
`
`Cables, except for the video in-out cable 2
`with the computer.
`
`, are not supplied
`
`Video Out
`
`S-Video Out /
`
`Audio-Out Left
`r =
`/I
`Audio-Out Right
`Lo_ q_j _JI /
`~- ~,.~.,.====1V
`Jl
`
`m
`
`11
`
`9'-
`
`,,,
`
`To microphone jack
`of the computer
`
`If you are using video equipment with S-video output,
`connect the S-video port of the video in-out cable to the
`S-video-out connector of your video equipment A
`for
`better picture quality.
`
`If you are not using video equipment with S-video output,
`connect the composite video port of the video in-out cable
`and the video-out port of your video equipment B
`.
`
`If your video equipment has only one audio output
`connector, use the left-audio connector on the audio cable
`for connection .
`
`2 Check the Enhanced Video status.
`
`a) Open the ThinkPad Features program and select the
`
`Enhanced Video (
`
`) icon.
`
`68
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 86 of 127
`
`

`

`Using the Enhanced VideoMPEG Functions
`
`b) If Video captureMPEG status is enabled, go to step 4 on
`page 69.
`
`If not, continue to the next step.
`
`c) Click on Advanced; then click on the 1st IRQ list box and
`assign an IRQ for the device. (The default IRQ is 11 .)
`
`3 Restart the computer to make the IRQ setting take effect.
`
`4 Open the Multimedia folder in OS2.
`
`5 Click on the Video IN Recorder icon.
`
`For more information on how to use video-in function in OS2,
`use Help.
`Note - - - - - - - - - - - - - - - - - - -~
`
`When you use the video-in recorder in OS2, you can use
`only Ultimotion Real-Time Compression as the
`compression type. Other compression types are not
`supported even if they are listed on the screen .
`
`The following shows considerations when using the video-in feature
`or video capture in OS2:
`
`Only one capture window can be open at a time.
`
`Video-IN Recorder is an OS2 MMPM2 application for video
`capture and video overlay. Its video capture size (width and
`length) is limited to up to 320 x240 pixels (for a NTSC video
`source) or 384 x288 pixels (for a PAL video source).
`
`Also, largesize capture, for example, 640 x480 for NTSC or over
`768 x576 for PAL, might be not available with your computer.
`If
`you try capturing large images, the captured image will not look
`as expected , or the capture application will be suspended with
`the following error message:
`
`SWVR118: The recordi ng initia l ization fai l ed return code is
`5
`8 -
`s y stem out o f memo r y
`
`If you have this error message, close Video-IN; then restart it.
`Before trying again , set the capture size to a smaller one .
`
`Chapter 3. Operating Your Computer 69
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 87 of 127
`
`

`

`Using the Enhanced VideoMPEG Functions
`
`Common Restrictions for Video CaptureDver/ay and MPEG
`Playback
`
`You must be aware of the following when using the video
`capturebverlay functions or the MPEG playback functions.
`Otherwise, the video image might not be visible on the computer
`screen or the television, or the computer might become locked up or
`suspended. In these cases, close the Video-IN Recorder or Digital
`Video Player and restart it, or restart the computer.
`
`You can use only one video application at a time-for example,
`you cannot capture video while playing back an MPEG file.
`If
`you use multiple applications, an error message appears on the
`screen and the computer might become locked up or suspended.
`In that case, restart the computer.
`
`Do not enter suspend mode while attempting video capture or
`overlay.
`
`Do not use the Enhanced Video functions $uch as capturing or
`overlaying video using the Video-IN Recorder, or playing back
`the MPEG files using the Digital Video Player) in the following
`display modes:
`
`- 1024x 768 resolution, 256 color depth, and 75Hz refresh rate
`- 1024x 768, 65;i36, and 75Hz
`- all 1280x1024 resolution mode
`
`Otherwise, the image might be corrupted.
`
`Do not select virtual screen in the ThinkPad Features program.
`
`Video overlay and capture are not supported in virtual screen
`mode, such as 1024x 768 on an LCD or 800 x600 on a television.
`
`70
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 88 of 127
`
`

`

`Using the Enhanced VideoMPEG Functions
`
`Using the Video OverlayCapture and MPEG Functions for
`Windows 3.11 and Windows 95
`
`~ ~ This section describes how to use the video overlaytapture and
`~ ~ MPEG functions in Windows 3.11 and Windows 95.
`To use the MPEG playback in Windows 3. 11: See "Using the
`MPEG Playback for Windows 3.11 ."
`
`To use the MPEG playback in Windows 95: See "Using the
`MPEG Playback for Windows 95" on page 73.
`
`To use the video-in (tideo capture and overlay) in Windows 3. 11
`and Windows 95: See "Using the Video-in Video Capture and
`Video Overlay) for Windows 3.11 and Windows 95" on page 75.
`
`Using the MPEG Playback for Windows 3. 11
`
`8 To use MPEG playback in Microsoft Windows 3.11 , do the following :
`
`1 Open Media Player.
`
`WIN
`
`2 Click on Device.
`
`3 Do one of the following:
`
`When you want to play MPEG files, select IBM MPEG-2.
`
`When you want to play a movie or CD, select
`CD-iWideoCD .
`
`4 When you want to play a video CD or CD-i movie from the
`
`CD-ROM drive of your computer, click on the Play ([E] ) icon.
`Otherwise, select the MPEG file you want to play; then click on
`
`the Play ([B) icon .
`
`You can also use the IBM Video CD Player program to play a video
`CD or CD-i in Windows. For information on how to use this
`application, Help is available in the Video CD Player screen .
`
`Chapter 3. Operating Your Computer
`
`71
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 89 of 127
`
`

`

`Using the Enhanced VideoMPEG Functions
`
`The following are considerations when using the MPEG playback
`function in Windows 3.11:
`
`Smart drive caching of the CD-ROM drive
`To be able to play CD-i movies, do not cache the CD-ROM drive
`by the SMARTDRV Version 5.0 or 5.1, which is supplied with PC
`DOS Version 7.0.
`
`Video CD Player program
`
`- The chapter-control-related functions might not work with
`some karaoke CDs.
`
`- Check the following if you do not have enough audio volume
`with the Video CD Player program:
`
`- The audio volume of the Video CD Player program
`
`- The WAVE and MASTER volume control of the Mwave
`Audio Control menu
`
`- The speaker volume control on the computer
`
`Drive letter for MCf* video CDCD-i and Video CD Player
`To change the drive letter for MCI video CDCD-i and Video CD
`Player:
`
`1 Select Control Panel from the Main folder.
`2 Select Drivers.
`3 Select [MCI] CD-iWideoCD .
`4 Click on Setup.
`5 Change the drive letter.
`
`72
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 90 of 127
`
`

`

`Using the Enhanced VideoMPEG Functions
`
`Using the MPEG Playback for Windows 95
`
`~ The MPEG feature enables hardware to decode MPEG playback
`~ files under playback application programs.
`
`Important-Before Using Video CDs in Windows 95 - - - - - - - - - - - - - - -~
`
`When you play your video CDs, the playback speed might be slow or playback might stop
`intermittently. To get a smooth playback of video CDs, disable the current CD-ROM driver and
`install the CD-ROM driver for DOSX/Vindows. Do the following :
`
`1 Start Windows 95.
`2 Disable the 32-bit storage driver:
`a) Select My Computer, Control Panel, and then System.
`
`b) Click on the Performance tab; then click on the File System button.
`
`c) Click on the Troubleshooting tab.
`
`d) Check Disable all 32 bit protect-mode disk drivers.
`
`e) Click on Apply, OK, and then Close.
`
`f) Select Yes to the question "Do you want to restart your computer now?' to make the
`change effective.
`
`3 Install the CD-ROM device driver for DOSX/Vindows:
`
`a) Insert the ThinkPad CD-ROM Driver Diskette in the diskette drive.
`b} Select Start and Run.
`c) Type A: \ UINSTALL; then click on OK.
`d) Follow the instructions on the screen.
`e) After the installation is complete, remove the diskette; then restart the computer.
`
`You can play video CDs at a normal speed.
`
`Note: This procedure might cause the following:
`
`Some functional restrictions $uch as the auto sense function)
`Decreasing computer performance
`
`Chapter 3. Operating Your Computer 73
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 91 of 127
`
`

`

`Using the Enhanced VideoMPEG Functions
`
`To use MPEG playback in Windows 95, do the following:
`
`1 Open Media Player.
`
`2 Click on Device .
`
`3 Do one of the following :
`
`When you want to play MPEG files, select IBM MPEG-2.
`
`When you want to play a movie or CD, select
`CD-iWideoCD .
`
`4 When you want to play a video CD or CD-i movie from the
`
`CD-ROM drive of your computer, click on the Play ([E]) icon.
`Otherwise, select the MPEG file you want to play; then click on
`
`the Play ([E]) icon.
`
`You can also use the IBM Video CD Player program to play a video
`CD or CD-i in Windows. For information on how to use this
`application, Help is available in the Video CD Player screen .
`
`The following are considerations when using the MPEG playback
`function in Windows 95:
`
`CD-i support
`Windows 95 does not support playing of CD-i movies.
`
`Video CD Player program
`
`- The chapter-control-related functions might not work with
`some karaoke CDs.
`
`-
`
`If you do not have enough audio volume with the Video CD
`Player program, check:
`
`- The audio volume of the Video CD Player program
`- The WAVE and MASTER volume control of the Mwave
`Audio Control menu
`- The speaker volume control on the computer
`
`Drive letter for MCI Video CDCD-i and Video CD Player
`To change the drive letter for MCI video CDCD-i and Video CD
`Player:
`
`1 Select Control Panel from the My Computer folder.
`
`74
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 92 of 127
`
`

`

`Using the Enhanced VideoMPEG Functions
`
`2 Click on the Multimedia icon.
`
`3 Select Advanced.
`
`4 Click on Media control device.
`
`5 Click on [MCI] CD-iWideoCD .
`
`6 Confirm that "Use this Media Control device" is selected;
`then select Settings.
`
`7 Change the drive letter.
`
`Using the Video-in Video Capture and Video Overlay) for Windows
`3. 11 and Windows 95
`
`You can use the capture applications supported by Video for
`Windows** and your computer. You can also overlay motion video
`from the video-in port by using applications supported by MCI
`~edia Control Interface) overlay.
`
`Notes:
`
`Only one capture window can be open at a time.
`When you use video capture with the overlay screen on, the
`capturing screen might be distorted . However, the data is
`correctly captured.
`
`To capture motion video:
`
`1 Turn off the computer.
`2 Connect the video in-out cable 2
`to the video-in port (o) 1
`of the computer; then connect your video equipment.
`
`Chapter 3. Operating Your Computer 75
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 93 of 127
`
`

`

`Using the Enhanced VideoMPEG Functions
`
`Video Out
`S-Video Out /
`
`Audio-Out Left
`/i
`
`r\ o t d;o-017'
`
`~- ,.-,,.-,,.~
`
`.
`
`11
`
`"'-
`
`fL
`To microphone jack
`of the computer
`
`Cables, except for the video in-out cable 2
`supplied with the computer.
`
`, are not
`
`If you are using video equipment with S-video output,
`connect the S-video port of the video in-out cable to the
`S-video-out connector of your video equipment A
`for
`better picture quality.
`
`If you are not using video equipment with S-video output,
`connect the composite video port of the video in-out cable
`and the video-out port of your video equipment B
`.
`
`If your video equipment has only one audio output
`connector, use the left-audio connector on the audio cable
`for connection.
`
`3 Check the Enhanced Video status.
`
`a) Open the ThinkPad Features program.
`
`b) Select the Enhanced Video (
`
`) icon.
`
`c) If Video captureMPEG status is enabled, go to step 5 on
`page 77.
`
`If not, continue to the next step.
`
`76
`
`IBM ThinkPad 760E , 760ED , or 760EL User's Guide
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 94 of 127
`
`

`

`Using the Enhanced VideoMPEG Functions
`
`d) Click on Advanced.
`
`e) Click on the 1st IRQ list box and assign an IRQ for the
`device. (The default IRQ is 11.)
`
`4 Restart the computer to make the IRQ setting take effect.
`
`5 Start the video capturing application program.
`
`If you use the Digital Video Producer (DVP) program, see
`"Using the Digital Video Producer for Windows."
`
`If you use the Media Player, see "Using the Overlay with
`Media Player for Windows" on page 81.
`
`Using the Digital Video Producer for Windows
`
`~ ~ Digital Video Producer (DVP) is an application program that has the
`~ ~ following functions :
`Capturing, compressing, and building a video file
`Capturing a still image (see page 80)
`
`Capturing, Compressing, and Building a Video File
`
`This sample procedure describes how to capture a video clip, import
`it in DVP, and build a compressed .AVI file that you can use in a
`presentation and other computer-based materials. The video file
`created in this example has the following characteristics. (You need
`approximately 17MB of hard disk space to capture a video file.)
`
`Frame size
`
`Frame rate
`
`160 pels by 120 pels
`
`15 frames per second
`
`Number of seconds
`
`30 seconds
`
`Audio sampling rates 8-bit, 11.025 kHz, mono
`
`Important - - - - - - - - - - - - - - - - - -~
`
`Make sure your video source (such as a VCR or video camera) is
`correctly connected to your computer before you start the video
`capture. If you select overlay mode from the Options menu in
`DVP Capture, you can verify the connection and look at your
`video both before and during the capture.
`
`Chapter 3. Operating Your Computer
`
`77
`
`GOOGLE EXHIBIT 1037
`GOOGLE v. NEONODE
`IPR2021-01041
`
`Page 95 of 127
`
`

`

`Using the Enhanced VideoMPEG Functions
`
`To capture, compress, and build a video file:
`
`1 Start DVP; then select Video Capture from the Tools menu.
`
`2 Select Set Capture File from the File menu.
`
`3 Enter a name for your capture file (such as CAPTURE.AV!) and
`specify the directory in which to save the file; then click on OK.
`
`4 Select Allocate File Space from the File menu and enter 17MB
`as the hard disk space to set aside for your capture file; then
`click on OK.
`
`5 Select Audio Format from the Options menu.
`
`6 Select these sound options: 8-bit, 11 kHz, and Mono. Then
`click on OK.
`
`7 Select Video Format from the Options menu.
`
`8 Select 160x120 for Image Dimensions and Overlay YUV422 or
`Compressed YUV422 for Image Format; then click on OK.
`
`9 Select Video Source from the Options menu, the type of video
`connector your video source uses (video or S-video), and the
`type of video signal (NTSC or PAL).
`
`To see the supported color standard list of countries, see the
`ThinkPad Features program help.
`
`10 Select Settings from the Capture menu and specify the

This document is available on Docket Alarm but you must sign up to view it.


Or .

Accessing this document will incur an additional charge of $.

After purchase, you can access this document again without charge.

Accept $ Charge
throbber

Still Working On It

This document is taking longer than usual to download. This can happen if we need to contact the court directly to obtain the document and their servers are running slowly.

Give it another minute or two to complete, and then try the refresh button.

throbber

A few More Minutes ... Still Working

It can take up to 5 minutes for us to download a document if the court servers are running slowly.

Thank you for your continued patience.

This document could not be displayed.

We could not find this document within its docket. Please go back to the docket page and check the link. If that does not work, go back to the docket and refresh it to pull the newest information.

Your account does not support viewing this document.

You need a Paid Account to view this document. Click here to change your account type.

Your account does not support viewing this document.

Set your membership status to view this document.

With a Docket Alarm membership, you'll get a whole lot more, including:

  • Up-to-date information for this case.
  • Email alerts whenever there is an update.
  • Full text search for other cases.
  • Get email alerts whenever a new case matches your search.

Become a Member

One Moment Please

The filing “” is large (MB) and is being downloaded.

Please refresh this page in a few minutes to see if the filing has been downloaded. The filing will also be emailed to you when the download completes.

Your document is on its way!

If you do not receive the document in five minutes, contact support at support@docketalarm.com.

Sealed Document

We are unable to display this document, it may be under a court ordered seal.

If you have proper credentials to access the file, you may proceed directly to the court's system using your government issued username and password.


Access Government Site

We are redirecting you
to a mobile optimized page.





Document Unreadable or Corrupt

Refresh this Document
Go to the Docket

We are unable to display this document.

Refresh this Document
Go to the Docket