`Approved for use through 06/30/2010. OMB 0651-0032
`U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE
`Under the Paperwork Reduction Act of 1995, no persons are required to respend to a collection of information unless it contains a valid OMB control number.
`
`ati
`Application Data Sheet 37 CFR 1.76
`Application Number
`
`Title of Invention|Coaxial Guide Catheter for Interventional Cardiology Procedures
`
`The application data sheetis part of the provisional or nonprovisional application for which it is being submitted. The following form contains the
`bibliographic data arrangedin a format specified by the United States Patent and Trademark Office as outlined in 37 CFR 1.76.
`This document may be completed electronically and submitted to the Office in electronic format using the Electronic Filing System (EFS) or the
`document may beprinted and included in a paperfiled application.
`
`Secrecy Order 37 CFR 5.2
`[_] Portions orall of the application associated with this Application Data Sheet mayfall under a Secrecy Order pursuant to
`
`37 CFR 5.2 (Paper filers only. Applications that fall under Secrecy Order may not befiled electronically.}
`
`Applicant Information:
`
`Applicant 1
`
`Applicant Authority @)Inventor|()Legal Representative under 35 U.S.C. 117 |Party of Interest under 35 U.S.C. 118
`
`Prefix) Given Name
`Middle Name
`Family Name
`iA
`ResidenceInformation (Select One)
`(@) US Residency
`(©) NonUS Residency
`(©) Active US Military Service
`
`Excelsior
`State/Province
`Country of Residencei
`us
`
`
`Mailing Address of Applicant:
`Address1
`
`Address 2
`
`Countryi
`Postal Code
`
`
`Applicant 2
`
`
`Applicant Authority @!nventor|()Legal Representative under 35 U.S.C. 117 C)Party of Interest under 35 U.S.C. 118
`
`Sutton
`Gregg
`
`Residence Information (Select One)
`(@) US Residency
`©) NonUS Residency
`() Active US Military Service
`
`Maple Grove
`State/Province
`Country of Residencei
`
`
`
`
`
`Citizenship under 37 CFR 1.41(b)i
`
`
`Mailing Address of Applicant:
`Address1
`
`Address 2
`
`
`
`
`City
`State/Province
`Postal Code
`Countryi
`
`Applicant 3
`
`Applicant Authority @!nventor | C©)Legal Representative under 35 U.S.C. 117 ]OParty of Interest under 35 U.S.C. 118
`Prefix| Given Name
`Middle Name
`Family Name
`
`EFS Web 2.2.2
`
`IPR2020-00126/-127/-128/-129/-130/-132/-134/-135/-136/-137/-138
`
`Medtronic Ex-1843
`Medtronic v. Teleflex
`Page 1
`
`Page 1
`
`
`
`IPR2020-00126/-127/-128/-129/-130/-132/-134/-135/-136/-137/-138
`
`Medtronic Ex-1843
`Medtronic v. Teleflex
`
`
`
`PTO/SB/14 (07-07)
`Approved for use through 06/30/2010. OMB 0651-0032
`U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE
`Underthe Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unlessit contains a valid OMB control number.
`
`
`
`Attorney Docket Number|2005.86US02
`Application Data Sheet 37 CFR 1.76
`—
`Application Number
`
`Title of Invention|Coaxial Guide Catheter for Interventional Cardiology Procedures
`
`
`
`
`Citizenship under 37 CFR 1.41(b)i
`US
`Mailing Address of Applicant:
`Address 1
`
`Address 2
`
`State/Province
`
`
`
`
`Applicant 4
`
`
`Applicant Authority @!nventor|C)Legal Representative under 35 U.S.C. 117 ]Oparty of Interest under 35 U.S.C. 118
`Prefix; Given Name
`Middle Name
`Family Name
`
`
`M.
`
`Garrity
`
`fciy[Mineascis———[StatesProvinee[WN|CountyofResidencei[US|
`
`PSCitizenship under 37 CFR 1.41(b)i
`US
`Mailing Address of Applicant:
`Address 1
`fades?
`City
`State/Province
`
`
`Postal Code | Countryi |
`
`
`
`
`Inventor Information blocks may be
`Inventors Must Be Listed - Additional
`All
`
`generatedwithin this form by selecting the Add button. Aa
`
`CorrespondenceInformation:
`
`Enter either Customer Number or complete the CorrespondenceInformation section below.
`For further information see 37 CFR 1.33(a).
`
`[| An Addressis being provided for the correspondenceInformation of this application.
`Customer Number
`24113
`
`
`Email Address
`pedersen@ptslaw.com
`|
`Add Email
`
`Application Information:
`
`Coaxial Guide Catheterfor Interventional Cardiology Procedures
`Title of the Invention
`
`
`Attorney Docket Number| 2005.86US02
`| Small Entity Status Claimed
`[xX]
`
`
`Application Type
`
`Nonprovisional
`
`Subject Matter
`
`Utility
`Suggested Technology Center(if any)
`
`
`
`Suggested Class (if any) Sub Class(if any}
`
`
`
`Total Numberof Drawing Sheets(if any) Suggested Figure for Publication {if any) |
`
`EFS Web 2.2.2
`
`Page 2
`
`Page 2
`
`
`
`PTO/SB/14 (07-07)
`Approved for use through 06/30/2010. OMB 0651-0032
`U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE
`Underthe Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unlessit contains a valid OMB control number.
`
`
`
`Attorney Docket Number|2005.86US02
`Application Data Sheet 37 CFR 1.76
`Application Number
`
`Title of Invention|Coaxial Guide Catheter for Interventional Cardiology Procedures
`
`
`Publication Information:
`
`[|] Request Early Publication (Fee required at time of Request 37 CFR 1.219)
`
`Request Not to Publish. | hereby requestthat the attached application not be published under 35 U.S.
`[] ©. 122(b) and certify that the invention disclosed in the attached application has not andwill not be the subjectof
`an application filed in another country, or under a multilateral international agreement, that requires publication at
`eighteen months afterfiling.
`
`Representative Information:
`
`Representative information should be provided for all practitioners having a power of attorney in the application. Providing
`this information in the Application Data Sheet does not constitute a power of attorney in the application (see 37 CFR 1.32).
`
`
`
`
`
`
`Enter Representative Name_sectioneither Customer Number or complete the below. If both sections
`
`
`are completed the Customer Numberwill be used for the Representative Information during processing.
`
`
`
` Please Select One:
`(@) Customer Number
`©) US PatentPractitioner © Limited Recognition (37 CFR 11.9)
`Customer Number 24113
`
`
`
`Domestic Benefit/National Stage Information:
`This section allows for the applicant to either claim benefit under 35 U.S.C. 119(e}, 120, 121, or 365(c) or indicate National Stage
`entry from a PCT application. Providing this information in the application data sheet constitutes the specific reference required by
`35 U.S.C. 119{e) or 120, and 37 CFR 1.78(a){2) or CFR 1.78(a)(4), and need not otherwise be madepart of the specification.
`
`
`
`Prior Application Status|Pending
`
`Application Number
`
`Continuity Type
`Division of
`
`Prior Application Number
`11416629
`
`Filing Date (YYYY-MM-DD})
`2006-05-03
`
`by selecting the Add button.
`
`
`Additional Domestic Benefit/National Stage Data may be generated within this form
`
`Foreign Priority Information:
`
`This section allows for the applicant to claim benefit of foreign priority and to identify any prior foreign application for which priority is
`not claimed. Providing this information in the application data sheet constitutes the claim forpriority as required by 35 U.S.C. 119(b)
`and 37 CFR 1.55(a).
`
`
`
`Application Number
`Country i
`Parent Filing Date (YYYY-MM-DD}
`Priority Claimed
`esOO
`Additional Foreign Priority Data may be generated within this form by selecting the
`Add
`Add button.
`
`
`Assignee Information:
`Providing this information in the application data sheet does not substitute for compliance with any requirementof part 3 of Title 37
`of the CFR to have an assignment recordedin the Office.
`
`Assignee 1
`
`EFS Web 2.2.2
`
`Page 3
`
`Page 3
`
`
`
`PTO/SB/14 (07-07)
`Approved for use through 06/30/2010. OMB 0651-0032
`U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE
`Underthe Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unlessit contains a valid OMB control number.
`
`
`
`Attorney Docket Number|2005.86US02
`Application Data Sheet 37 CFR 1.76
`Application Number
`
`Title of Invention|Coaxial Guide Catheter for Interventional Cardiology Procedures
`
`
`
`
`
`If the Assignee is an Organization check here.
`
`
`Prefix
`
`Given Name
`
`Middle Name
`
`Family Name
`
`Suffix
`
`
`
`Mailing Address Information:
`Address1
`
`Address 2
`
`
`City State/Province
`
`Country |
`Postal Code
`Phone Number
`Fax Number
`
`Email Address
`
`Additional Assignee Data may be generated within this form by selecting the Add
`button.
`
`Signature:
`
`A signature of the applicant or representative is required in accordance with 37 CFR 1.33 and 10.18. Please see 37
`CFR 1.4(d) for the form of the signature.
`
`
`
`
`Signature=|/Brad Pedersen/ Date (YYYY-MM-DD)|
`
`
`
` 2010-06-28
`
`
`
`
`
`First Name|Brad Last Name|Pedersen Registration Number|32432
`
`This collection of information is required by 37 CFR 1.76. The information is required to obtain or retain a benefit by the public which
`is to file (and by the USPTOto process} an application. Confidentiality is governed by 35 U.S.C. 122 and 37 CFR 1.14. This
`collection is estimated to take 23 minutes to complete, including gathering, preparing, and submitting the completed application data
`sheet form to the USPTO. Time will vary depending upon the individual case. Any comments on the amountof time you require to
`complete this form and/or suggestions for reducing this burden, should be sent to the Chief Information Officer, U.S. Patent and
`Trademark Office, U.S. Department of Commerce, P.O. Box 1450, Alexandria, VA 22313-1450. DO NGT SEND FEES OR
`COMPLETED FORMS TO THIS ADDRESS. SEND TO: Commissionerfor Patents, P.O. Box 1450, Alexandria, VA 22313-1450.
`
`EFS Web 2.2.2
`
`Page 4
`
`Page 4
`
`
`
`Privacy Act Statement
`
`
`
`The Privacy Act of 1974 (P.L. 93-579) requires that you be given certain information in connection with your submission of the attached form related to
`a patent application or patent. Accordingly, pursuant to the requirements of the Act, please be advised that: (1) the general authority for the collection
`ofthis information is 35 U.S.C. 2(b)(2); (2) furnishing of the information solicited is voluntary; and (3) the principal purpose for which the information is
`used by the U.S. Patent and Trademark Office is to process and/or examine your submission related to a patent application or patent.
`If you do not
`furnish the requested information, the U.S. Patent and Trademark Office may not be able to process and/or examine your submission, which may
`result in termination of proceedings or abandonmentof the application or expiration of the patent.
`
`The information provided by you in this form will be subject to the following routine uses:
`
`1.
`
`The information on this form will be treated confidentially to the extent allowed under the Freecom of Information Act (5 U.S.C. 552)
`and the Privacy Act (5 U.S.C. 552a). Records from this system of records may be disclosed to the Department of Justice to determine
`whetherthe Freedom of Information Act requires disclosure of these records.
`
`A record from this system of records may be disclosed, as a routine use, in the course of presenting evidence to a court, magistrate, or
`administrative tribunal, including disclosures to opposing counsel in the course of settlement negotiations.
`
`A record in this system of records may be disclosed, as a routine use, to a Memberof Congress submitting a request involving an
`individual, to whom the record pertains, when the individual has requested assistance from the Memberwith respect to the subject matter of
`the record.
`
`A record in this system of records may be disclosed, as a routine use, to a contractor of the Agency having needfor the information in
`order to perform a contract. Recipients of information shall be required to comply with the requirements of the Privacy Act of 1974, as
`amended, pursuant to 5 U.S.C. 552a(m).
`
`A record related to an International Applicationfiled under the Patent Cooperation Treaty in this system of records may be disclosed,
`as a routine use, to the International Bureau of the World Intellectual Property Organization, pursuant to the Patent Cooperation Treaty.
`
`A record in this system of records may be disclosed, as a routine use, to another federal agency for purposes of National Security
`review (35 U.S.C. 181) and for review pursuant to the Atomic Energy Act (42 U.S.C. 218(c))}.
`
`A record from this system of records may be disclosed, as a routine use, to the Administrator, General Services, or his/her designee,
`during an inspection of records conducted by GSA aspart of that agency's responsibility to recommend improvements in records
`management practices and programs, underauthority of 44 U.S.C. 2904 and 2906. Such disclosure shall be made in accordancewith the
`GSAregulations governing inspection of records for this purpose, and any other relevant(i.e., GSA or Commerce) directive. Such
`disclosure shall not be used to make determinations aboutindividuals.
`
`A record from this system of records may be disclosed, as a routine use, to the public after either publication of the application pursuan
`te 35 U.S.C. 122(b) or issuance of a patent pursuant to 35 U.S.C. 151. Further, a record may be disclosed, subjectto the limitations of 37
`CFR 1.14, as a routine use, to the public if the record wasfiled in an application which became abandonedorin which the proceedings were
`terminated and which application is referenced by either a published application, an application open to public inspections or an issued
`patent.
`
`A record from this system of records may be disclosed, as a routine use, to a Federal, State, or local law enforcement agency,if the
`USPTO becomesawareofa violation or potential violation of law or regulation.
`
`
`EFS Web 2.2.2
`
`Page 5
`
`Page 5
`
`
`
`Attorney Docket No. 2005.86US02
`
`Abstract of the Disclosure
`
`A coaxial guide catheter to be passed through guide catheter havingafirst lumen, for use
`
`with interventional cardiology devices that are insertable into a branch artery that branches off
`
`from a main artery. The coaxial guide catheter is extended through the lumen of the guide
`
`catheter and beyond the distal end of the guide catheter and inserted into the branch artery. The
`
`device assists in resisting axial and shear forces exerted by an interventional cardiology device
`
`passed through the second lumen and beyondthe flexible distal tip portion that would otherwise
`
`tend to dislodge the guide catheter from the branch artery.
`
`29
`
`Page 6
`
`Page 6
`
`
`
`Attorney Docket No. 2005.86US02
`
`COAXIAL GUIDE CATHETER FOR INTERVENTIONAL CARDIOLOGY
`PROCEDURES
`
`Field of the Invention
`
`The present invention relates generally to catheters used in interventional cardiology
`
`procedures. More particularly the present invention relates to methods and apparatus for
`
`increasing backup support for catheters inserted into the coronary arteries from the aorta.
`
`Background of the Invention
`
`Interventional cardiology procedures often include inserting guidewires or other
`
`instruments through catheters into coronary arteries that branch off from the aorta. For the
`
`purposes of this application, the term "interventional cardiology devices" is to be understood to
`
`include but not be limited to guidewires, balloon catheters, stents and stent catheters.
`
`In
`
`coronary artery disease the coronary arteries may be narrowed or occluded by atherosclerotic
`
`plaques or other lesions. These lesions may totally obstruct the lumen of the artery or may
`
`dramatically narrow the lumen of the artery. Narrowing is referred to as stenosis. In order to
`
`diagnose and treat obstructive coronary artery disease it is commonly necessary to pass a
`
`guidewire or other instruments through and beyond the occlusion or stenosis of the coronary
`
`artery.
`
`In treating a stenosis, a guide catheter is inserted through the aorta and into the ostium of
`
`the coronary artery. This is sometimes accomplished with the aid of a guidewire. A guide
`
`catheter is typically seated into the opening or ostium of the artery to be treated and a guidewire
`
`Page 7
`
`
`
`Attorney Docket No. 2005.86US02
`
`or other instrument is passed through the lumen of the guide catheter and inserted into the artery
`
`beyond the occlusion or stenosis. Crossing tough lesions can create enough backward force to
`
`dislodge the guide catheter from the ostium of the artery being treated. This can make it difficult
`
`or impossible for the interventional cardiologist to treat certain forms of coronary artery disease.
`
`Prior attempts to provide support to the guiding catheter to prevent backward
`
`dislodgement from the coronary ostium (referred to as "backup support") fall generally into four
`
`categories.
`
`First are guiding catheters that, through a combination of shape and stiffness, are
`
`configured to draw backup support from engaging the wall of the aortic arch opposing the ostium
`
`of the coronary artery that is being accessed. Examples of this approach can be found in U.S.
`
`Patent No. 6,475,195 issued to Yoda and U.S. Patent No. 5,658,263 issued to Dang et al. These
`
`guiding catheters all share the common limitation that a guide catheter stiff enough to provide
`
`adequate backup support is often too stiff to be safely inserted into the aorta without the
`
`possibility of causing damage to the aortic wall. In addition, attempts to deep seat the guide
`
`catheter have been made but the rigid nature of the guide catheter creates the risk that the guide
`
`catheter may damage the coronary artery wall or that the guide catheter may occlude the
`
`coronary artery and interfere with blood flow to the heart muscle.
`
`Second are guiding catheters that include a retractable appendage. The appendage in
`
`these catheters can be extended to engage the opposing wall of the aortic arch to provide backup
`
`support or the appendage may be placed under tension to stiffen a bend in the catheter to provide
`
`backup support. Examples of this approach may be found in U.S. Patent Nos. 4,813, 930 issued
`
`2
`
`Page 8
`
`
`
`Attorney Docket No. 2005.86US02
`
`to Elliot; 5,098,412 issued to Shiu; and 6,860,876 issued to Chen. These guiding catheters tend
`
`to be somewhat mechanically complex and have not been widely adopted by practitioners.
`
`Third are guide catheters that have a portion that seeks to expand laterally to grip the
`
`interior wall of the ostium of the coronary artery to provide a force acting in opposition to the
`
`backward forces created when trying to maneuver a therapeutic device past a lesion or blockage
`
`in the coronary artery. These devices can include a balloon secured to a guidewire or a catheter
`
`or another device for expanding to grip the walls of the coronary artery from within. Examples
`
`of this approach may be found in U.S. Patent Nos. 4,832,028 issued to Patel; 6,595,952 issued to
`
`Forsberg; and U.S. Published Application No. 2005/0182437 by Bonnette et al. Again, these
`
`devices tend to be mechanically complex and can completely occlude the coronary ostium thus
`
`stopping perfusion of the coronary artery.
`
`A fourth technique includes the placement of a smaller guide catheter within a larger
`
`guide catheter in order to provide added support for the crossing of lesions or for the distal
`
`delivery of balloons and stents. This technique has been described in an article by Takahashi
`
`entitled "New Method to Increase a Backup Support of Six French Guiding Coronary Catheter,"
`
`published in Catheterization and Cardiovascular Interventions, 63:452-456 (2004). This
`
`technique is used in order to provide a method of deep seating the guide catheter within the
`
`ostium of the coronary artery. Deep seating refers to inserting the catheter more deeply into the
`
`ostium of the coronary artery than typically has been done before. Unfortunately, deep seating
`
`by this technique with a commonly available guide catheter creates the risk that the relatively
`
`3
`
`Page 9
`
`
`
`Attorney Docket No. 2005.86US02
`
`stiff, fixed curve, guide catheter will damage the coronary artery. This damage may lead to
`
`dissection of the coronary artery when the catheter is advanced past the ostium.
`
`Several other problems arise when using a standard guide catheter in this catheter-in-a(cid:173)
`
`catheter fashion. First, the inner catheters must be substantially longer than the one hundred
`
`centimeter guide catheter. Second, a new hemostasis valve must be placed on the inner guide
`
`catheter which prevents the larger guide catheter from being used for contrast injections or
`
`pressure measurements. Third, the smaller guide catheter still must be inserted into the coronary
`
`vessel with great care since the smaller guide catheter has no tapered transition or dilator at its tip
`
`and does not run over a standard 0.014 inch guidewire.
`
`Thus, the interventional cardiology art would benefit from the availability of a system
`
`that would be deliverable through standard guide catheters for providing backup support by
`
`providing the ability to effectively create deep seating in the ostium of the coronary artery.
`
`Summary of the Invention
`
`The present invention is a coaxial guide catheter that is deliverable through standard
`
`guide catheters by utilizing a guidewire rail segment to permit delivery without blocking use of
`
`the guide catheter. The coaxial guide catheter preferably includes a tapered inner catheter that
`
`runs over a standard 0.014 inch coronary guidewire to allow atraumatic placement within the
`
`coronary artery. This feature also allows removal of the tapered inner catheter after the coaxial
`
`guide catheter is in place. The tapered inner catheter provides a gradual transition from the
`
`4
`
`Page 10
`
`
`
`Attorney Docket No. 2005.86US02
`
`standard 0.014 inch diameter guidewire to the diameter of the coaxial guide catheter which is
`
`typically five to eight French.
`
`The coaxial guide catheter preferably can be delivered through commonly existing
`
`hemostatic valves used with guide catheters while still allowing injections through the existing Y
`
`adapter.
`
`In addition, the coaxial guide catheter preferably has an inner diameter that is
`
`appropriate for delivering standard coronary treatment devices after it is placed in the coronary
`
`artery.
`
`In one embodiment, the coaxial guide catheter is made in at least three sizes
`
`corresponding to the internal capacity of 8 French, 7 French, and 6 French guide catheters that
`
`are commonly used in interventional cardiology procedures. An 8 French catheter has an
`
`internal diameter greater than or equal to 0.088 inches. A 7 French catheter has an internal
`
`diameter greater than or equal to 0.078 inches. A 6 French guide catheter has an internal
`
`diameter greater than or equal to 0.070 inches. Thus, for three exemplary sizes the effective
`
`internal diameter of the coaxial guide catheter may be as follows. For a 7 French in 8 French
`
`coaxial guide catheter the internal diameter should be greater than or equal to 0.078 inches. For
`
`a 6 French in 7 French coaxial guide catheter the internal diameter should be greater than or
`
`equal to 0.070 inches. For a 5 French in 6 French coaxial guide catheter the internal diameter
`
`should be greater than or equal to 0.056 inches.
`
`Interventional cardiology procedures are typically carried out under fluoroscopy or
`
`another x-ray or imaging technique. Therefore, one embodiment of the coaxial guide catheter of
`
`5
`
`Page 11
`
`
`
`Attorney Docket No. 2005.86US02
`
`the present invention includes a radiopaque marker at its distal tip to facilitate positioning and
`
`manipulation of the coaxial guide catheter.
`
`The present invention generally includes the coaxial guide catheter and a tapered inner
`
`catheter. The coaxial guide catheter includes a tip portion, a reinforced portion, and a
`
`substantially rigid portion. The coaxial guide catheter will generally have an overall length of
`
`preferably approximately 125 cm, though this should not be considered limiting.
`
`In one embodiment, the tip portion may include a soft tip and a marker band. The soft tip
`
`is tapered and may be formed from a low durometer polymer or elastomer material such as
`
`polyether block amide polymer, (PEBA, Pebax®) the marker band may be formed from a
`
`platinum iridium alloy sandwiched between the Pebax® that extends from the bump tip and a
`
`PTFE liner.
`
`In one embodiment, the reinforced portion may be reinforced, preferably with metallic
`
`fibers in a braided or coiled pattern. The braided or coiled portion is lined by a PTFE liner and
`
`may be covered on its exterior with Pebax®. The braided or coiled portion may extend
`
`approximately 20 to 110 cm in length.
`
`In one exemplary embodiment, the braided portion
`
`extends approximately 32 to 36 cm.
`
`Preferably, the rigid portion may be advantageously formed from a stainless steel or
`
`Nitinol tube. The rigid portion may be joined to the braid or coil portion by welding. The rigid
`
`portion may include a cutout portion and a full circumference portion. For example, the cutout
`
`portion may include a section where about 45% of the circumference of the cylindrical tubular
`
`structure has been removed. The cutout portion may also include a section where 75-90% of the
`
`6
`
`Page 12
`
`
`
`Attorney Docket No. 2005.86US02
`
`circumference of the tubular structure has been removed. In one exemplary embodiment, the
`
`portion having approximately 45% removed may extend for approximately 75 cm and the
`
`portion having 75-90% of the structure removed extends for about 15 cm. The full
`
`circumference portion of the rigid portion is typically located at the most proximal end of the
`
`coaxial guide catheter.
`
`The rigid portion may include a plurality of radially oriented slits or other cuts in its distal
`
`portion to increase and control the flexibility of the rigid portion
`
`In an exemplary embodiment, the tapered inner catheter generally includes a tapered
`
`inner catheter tip and a cutout portion. The tapered inner catheter tip includes a tapered portion
`
`and a straight portion. The tapered portion is typically at the most distal end of the tapered inner
`
`catheter. Both the straight portion and the tapered portion are pierced by a lumen through which
`
`a guidewire may be passed.
`
`The cutout portion supports a track passing along the concave side thereof that continues
`
`from the lumen that passes through the straight portion and the tapered portion. The tapered
`
`inner catheter may also have a clip or snap attachment at its proximal end to releasably join the
`
`tapered inner catheter to the coaxial guide catheter.
`
`In operation, the tapered inner catheter is inserted inside and through the coaxial guide
`
`catheter. The tapered inner catheter is positioned so that the tapered inner catheter tip extends
`
`beyond the tip portion of the coaxial guide catheter. The coaxial guide catheter-tapered inner
`
`catheter combination may then be inserted into a blood vessel that communicates with the aorta.
`
`The coaxial guide catheter-tapered inner catheter combination may be threaded over a preplaced
`
`7
`
`Page 13
`
`
`
`Attorney Docket No. 2005.86US02
`
`0.014 inch guidewire. The tapered inner catheter-coaxial guide catheter combination is advanced
`
`up the aorta until the tapered inner catheter is passed into the ostium of a coronary artery over the
`
`guidewire. Once the coaxial guide catheter-tapered inner catheter combination has been inserted
`
`sufficiently into the ostium of the coronary artery to achieve deep seating the tapered inner
`
`catheter may be removed. During this entire process at least part of the coaxial guide catheter(cid:173)
`
`tapered inner catheter combination is located inside of the guide catheter.
`
`Once the tapered inner catheter is removed a cardiac treatment device, such as a
`
`guidewire, balloon or stent, may be passed through the coaxial guide catheter within the guide
`
`catheter and into the coronary artery. As described below, the presence of the coaxial guide
`
`catheter provides additional backup support to make it less likely that the coaxial guide catheter
`
`guide catheter combination will be dislodged from the ostium of the coronary artery while
`
`directing the coronary therapeutic device past a tough lesion such as a stenosis or a chronic
`
`arterial occlusion.
`
`A guide catheter inserted into the ostium of a branch artery where it branches off from a
`
`larger artery is subject to force vectors that tend to dislodge the distal end of the guide catheter
`
`from the ostium of the branch artery when a physician attempts to direct a guidewire or other
`
`interventional cardiology device past an occlusive or stenotic lesion in the branch artery. This
`
`discussion will refer to a guide wire but it is to be understood that similar principles apply to
`
`other interventional cardiology devices including balloon catheters and stent catheters.
`
`One of the forces that acts on the guide catheter is an axial force substantially along the
`
`axis of the branch artery and the portion of the guide catheter that is seated in the ostium. This
`
`8
`
`Page 14
`
`
`
`Attorney Docket No. 2005.86US02
`
`force vector is a reactive force created by the pushing back of the guide wire against the guide
`
`catheter as the physician tries to force the guidewire through or past the lesion. It tends to push
`
`the distal end of the catheter out of the ostium in a direction parallel to the axis of the branch
`
`artery and the axis of the distal end of the guide catheter.
`
`Another of the force vectors that acts on the guide catheter is a shearing force that tends
`
`to dislodge the distal end of the guide catheter from the ostium of the branch artery in a direction
`
`perpendicular to the axis of the branch artery and the axis of the distal end of the guide catheter.
`
`This force vector arises from curvature of the guide catheter near its distal end and the guide wire
`
`pushing on the curved portion of the guide catheter as the physician applies force to the
`
`guidewire. The coaxial guide catheter of the present invention assists in resisting both the axial
`
`forces and the shearing forces that tend to dislodge a guide catheter from the ostium of a branch
`
`artery.
`
`The system 1s deliverable usmg standard techniques utilizing currently available
`
`equipment. The present invention also allows atraumatic placement within the coronary artery.
`
`Further, the invention is deliverable through an existing hemostatic valve arrangement on a guide
`
`catheter without preventing injections through existing Y adapters. Finally, the invention has an
`
`inner diameter acceptable for delivering standard coronary devices after it is placed in the blood
`
`vessel.
`
`9
`
`Page 15
`
`
`
`Attorney Docket No. 2005.86US02
`
`Brief Description of the Drawings
`
`Fig. 1 is a schematic depiction of the coaxial guide catheter and a tapered inner catheter
`
`in accordance with the present invention;
`
`Fig. 2 is schematic depiction of the coaxial guide catheter and tapered inner catheter
`
`assembled in accordance with the present invention;
`
`Fig. 3 is a plan view of a guide catheter, the coaxial guide catheter, and a treatment
`
`catheter in accordance with the present invention;
`
`Fig. 4 is a sectional view of the coaxial guide catheter in accordance with the present
`
`invention;
`
`Fig. 5 is a cross sectional view of the coaxial guide catheter and tapered inner catheter in
`
`accordance with the present invention;
`
`Fig. 6 is another cross sectional view of the coaxial guide catheter and tapered inner
`
`catheter in accordance with the present invention;
`
`Fig. 7 is a schematic view of a guide catheter and a guidewire located in an aortic arch
`
`and a coronary artery and the guide catheter and guidewire in a second position depicted in
`
`phantom;
`
`Fig. 8 is a schematic view of a guide catheter, a guidewire, a coaxial guide catheter in
`
`accordance with the present invention and a tapered inner catheter located in the aortic arch and
`
`coronary artery;
`
`Fig. 9 is a schematic view of a guide catheter, a guidewire and a coaxial guide catheter in
`
`accordance with the present invention located in the aortic arch and coronary artery;
`
`10
`
`Page 16
`
`
`
`Attorney Docket No. 2005.86US02
`
`Fig. 10 is a flat pattern for making relief cuts in a curved rigid portion of the coaxial
`
`guide catheter in accordance with the present invention;
`
`Fig. 11 is a detailed view taken from Fig. 1 O;
`
`Fig. 12 is a plan view of the rigid portion in accordance with the present invention;
`
`Fig. 13 is an elevational view of the rigid portion;
`
`Fig. 14 is a sectional view of the rigid portion taken along section line 14-14 of Fig. 13;
`
`and
`
`Fig. 15 is a sectional view of the rigid portion taken along section line 15-15 of Fig. 13.
`
`Fig. 16 is a sectional view of the rigid portion taken along section line 16-16 of Fig. 13.
`
`Fig. 17 is a plan view of a coaxial guide cathete