`User's Guide
`
`Roku EX1014
`U.S. Patent No. 7,589,642
`
`1
`
`
`
`IMPORTANT RULES FOR SAFE
`OPERATION
`
`CAUTION
`
`RISK OF ELECTRIC SHOCK
`DO NOT OPEN
`
`AVIS
`
`RISQUE DE CHOC ÉLECTRIQUE
`NE PAS OUVRIR
`
`CAUTION: To reduce the risk of electric shock, do not remove
`cover (or back).. No user-serviceable parts inside. Refer servicing to
`qualified service personnel.
`
`This symbol is intended to
`alert you that uninsulated
`voltage within this product may
`have sufficient magnitude to
`cause electric shock.
`Therefore, it is dangerous to
`make any kind of contact with
`any inside part of this product.
`
`WARNING
`TO PREVENT FIRE OR ELECTRIC
`SHOCK, DO NOT EXPOSE THIS
`UNIT TO RAIN OR MOISTURE.
`
`This symbol is intended to alert you of the
`presence of important operating and
`maintenance (servicing). instructions in the
`literature accompanying this product.
`
`1. Carefully read all safety and
`operating instructions before
`operating this product, and
`retain them for future
`reference.
`2. Follow all warnings and
`cautions in the operating
`instructions, as well as those
`that are affixed to this
`product.
`3. Follow all operating
`instructions that accompany
`this product.
`4. Do not use liquid or aerosol
`cleaners. Use a damp cloth
`for cleaning.
`
`2
`
`5. Do not expose this product to
`moisture. Do not place this
`product on a wet surface, or
`spill liquids on or near this
`product.
`6. Route all cords so that objects
`cannot be placed on or
`against them. This can pinch
`or damage the cords. Pay
`particular attention to the
`points where the cords exit
`the product.
`7. Do not open the cover of this
`product and attempt service.
`Refer all servicing to
`qualified personnel only.
`
`Continued on next page
`
`
`
`IMPORTANT RULES FOR SAFE
`OPERATION, Continued
`
`8. For damage that requires
`service, unplug this product
`from the IR port. Refer service to
`qualified personnel under the
`following conditions:
`a. When there is damage
`to the cord or plug
`If liquid enters, or an
`object falls on this
`product
`If you expose this
`product to rain or
`water
`
`b.
`
`c.
`
`d.
`
`If this product does not
`operate normally by
`following the operating
`instructions
`e. When this product exhibits
`a distinct change in
`performance
`9. Upon completion of any service
`or repairs to this product, ask
`the service technician to perform
`safety checks to determine that
`this product is in proper
`operating condition.
`
`3
`
`
`
`Introducing the VCR Commander Service
`
`The VCR CommanderTM service allows you to easily record
`programs whether your television is on or off. You simply select
`programs to record from the Explorer® Digital Home
`Communications Terminal (DHCT) Interactive Program Guide
`(IPG) or use the VCR Timer feature. The VCR Commander service
`works with models of the Explorer DHCT that have the infrared
`(IR) port on the back of the unit to control VCR recording.
`Before you can use the VCR Commander service, you must
`connect the IR Blaster and then set up the DHCT to recognize
`your brand of VCR.
`Use this guide for the following tasks:
`• Connecting the IR Blaster to the Explorer DHCT and to your
`VCR
`• Setting up the VCR Commander service to work with your
`brand of VCR
`• Scheduling a program to record on your VCR
`Notes:
`• The IR Blaster is compatible with all Explorer DHCTs except the
`Explorer 2000; for the Explorer 2000 refer to the VCR
`CommanderTM Module User’s Guide.
`• Refer to your DHCT user’s installation guide for information
`about setting up your Explorer DHCT, and to your remote
`control user’s guide for information about setting up and
`using your remote control.
`
`4
`
`
`
`In This Guide
`
`Installing the IR Blaster ........................................................................ 6
`Attaching the IR Blaster Cable ........................................................ 6
`Attaching the IR Blaster to Your VCR ............................................ 7
`Setting Up VCR Commander Service ................................................ 8
`Scheduling VCR Recording ............................................................... 14
`One-Touch Recording ..................................................................... 14
`Using the IPG ................................................................................... 15
`Using the VCR Timer ...................................................................... 17
`Clearing a VCR Timer ..................................................................... 19
`Manufacturer’s VCR Codes ............................................................... 20
`Troubleshooting ................................................................................... 25
`
`5
`
`
`
`Installing the IR Blaster
`
`This section explains how to
`• Attach the IR Blaster cable to the Explorer DHCT
`• Attach the IR Blaster to your VCR
`
`Attaching the IR Blaster Cable Connector
`
`WARNING:
`Avoid electric shock. Disconnect the DHCT from the
`AC power outlet before attaching the connector.
`
`To attach the IR Blaster cable to the Explorer DHCT, complete
`these steps.
`1. Disconnect the Explorer DHCT from the AC power outlet.
`2. Locate the port labeled IR on the back of the Explorer DHCT.
`3. Plug the cable connector into the IR port.
`4. Reconnect the Explorer DHCT to the AC power outlet.
`
`CATV CONVERTER
`MADE IN MEXICO
`
`IR
`
`DIGITAL AUDIO
`OUT
`
`CABLE
`OUT
`
`L
`
`R
`
`ETHERNET
`
`1394
`
`S - VIDEO
`OUT
`
`VIDEO
`OUT
`
`AUDIO
`OUT
`
`Cable
`Connector
`
`IR
`Blaster
`
`6
`
`T8941
`
`Continued on next page
`
`
`
`Installing the IR Blaster, Continued
`
`Attaching the IR Blaster to Your VCR
`1. Refer to your VCR user’s guide
`to locate the IR sensor window.
`(The IR sensor is where the VCR
`receives the remote control signal.)
`2. Remove the covering on the
`adhesive strip from the loop
`tape, which is attached to the
`hook fastener on the IR
`Blaster.
`Notes:
`• Attaching the IR Blaster to
`the VCR may be easier if the
`loop tape remains attached
`to the hook fasteners.
`• After attaching the IR Blaster to the VCR, the hook
`and loop fastener allows you to easily remove the IR
`Blaster for cleaning or to move the VCR.
`3. Mount the IR Blaster within 3 inches of the IR sensor on your
`VCR by pressing the IR Blaster against your VCR to secure it.
`Notes:
`• A , B, C, and D are typical places where the IR Blaster can
`be attached (within 3 inches of the IR sensor on your VCR).
`• Do not block the tape insert door on your VCR.
`
`7
`
`
`
`Setting Up VCR Commander Service
`
`Use your Explorer Remote Control to set up the VCR Commander
`service.
`After you connect the IR Blaster, you must program the code for
`your brand of VCR into the memory of the VCR Commander.
`Before you begin
`• Be sure the VCR is off
`• Be sure the TV is on and tuned to your cable channel (3 or 4)
`C
`EXIT
`Note: At any time during this procedure, you can press or
`to manually record a program on your VCR.
`
`1. Turn on the power to your
`Explorer DHCT.
`2. Press twice to display
`SETTINGS
`the General Settings menu.
`
`General Settings
`Highlight a Preference, press SELECT to change its setting(s).
`PREFERENCE
`CURRENT STATUS
`Timer: All
`Timer: Remind New
`Timer: Sleep
`Set: Bypass
`Set: Color Scheme
`Set: Output Chan
`Set: VCR Comnder
`
`Disabled
`
`3. Press s or t to scroll to the
`Set: VCR Commander
`preference; then, press .
`SELECT
`Note: If the menu does not
`display the VCR Commander
`option, contact your cable
`service provider.
`
`General Settings
`Highlight a Preference, press SELECT to change its setting(s).
`PREFERENCE
`CURRENT STATUS
`Set: Bypass
`Set: Color Scheme
`Set: Output Chan
`Set: VCR Comnder
`Timer: All
`Timer: Remind New
`Timer: Sleep
`
`Disabled
`
`4. Press s or t to scroll to Setup;
`then, press .
`SELECT
`
`General Settings
`Highlight desired VCR Commander setting, press SELECT to change.
`PREFERENCE
`STATUS
`
`Set: VCR Comnder
`
`Disable
`Setup
`Enable
`
`Accept
`
`Cancel Changes
`
`Continued on next page
`
`8
`
`
`
`Setting Up VCR Commander Service, Continued
`
`5. Scroll to VCR Input;
`then, press .
`SELECT
`
`6. Your VCR is connected to your
`DHCT by one of the following
`cable types. Locate your cable
`type in this step and follow the
`instructions:
`•
`For RF/coaxial cable,
`choose Channel 3/4; then,
`press .
`SELECT
`
`•
`
`For RCA jacks,
`choose Audio-Video; then,
`press .
`SELECT
`
`General Settings
`Highlight a SETUP, press SELECT to advance to next setting.
`PREFERENCE
`SETUP
`
`Set: VCR Comnder
`Setup
`
`VCR Code
`VCR Input
`VCR Code
`
`Channel 3/4
`
`Accept
`
`Cancel Changes
`
`General Settings
`Highlight an INPUT, press SELECT to change.
`INPUT
`PREFERENCE
`
`Set: VCR Comnder
`Setup
`VCR Input
`
`S-Video
`Channel 3/4
`Audio-Video
`
`Accept
`
`Cancel Changes
`
`General Settings
`Highlight an INPUT, press SELECT to change.
`INPUT
`PREFERENCE
`
`Set: VCR Comnder
`Setup
`VCR Input
`
`Channel 3/4
`Audio-Video
`S-Video
`
`Accept
`
`Cancel Changes
`
`•
`
`For S-Video (SVHS),
`choose S-Video; then,
`press .
`SELECT
`
`General Settings
`Highlight an INPUT, press SELECT to change.
`INPUT
`PREFERENCE
`
`Set: VCR Comnder
`Setup
`VCR Input
`
`Audio-Video
`S-Video
`Channel 3/4
`
`Accept
`
`Cancel Changes
`
`Continued on next page
`
`9
`
`
`
`Setting Up VCR Commander Service, Continued
`
`7. Press again;
`SELECT
`press s or t to scroll to Setup
`and press again.
`SELECT
`
`General Settings
`Highlight desired VCR Commander setting, press SELECT to change.
`PREFERENCE
`STATUS
`
`Set: VCR Comnder
`
`Disable
`Setup
`Enable
`
`Accept
`
`Cancel Changes
`
`General Settings
`Highlight a SETUP, press SELECT to advance to next setting.
`PREFERENCE
`SETUP
`
`Set: VCR Comnder
`Setup
`
`VCR Input
`VCR Code
`VCR Input
`
`OOO
`
`Accept
`
`Cancel Changes
`
`General Settings
`Highlight a SETUP, press SELECT to advance to next setting.
`VCR Commander
`PREFERENCE
`SETUP
`Instructions
`Please power OFF your VCR.
`Enter the Model Code for your VCR or 000,
`VCR Input
`then press SELECT.
`Set: VCR Comnder
`VCR Code
`Setup
`VCR Input
`
`000
`
`Clear VCR Model Code
`
`Cancel Setup
`
`Accept
`
`Cancel Changes
`
`General Settings
`Highlight a SETUP, press SELECT to advance to next setting.
`VCR Commander
`PREFERENCE
`SETUP
`Instructions
`Please power OFF your VCR.
`Enter the Model Code for your VCR or 000,
`VCR Input
`then press SELECT.
`Set: VCR Comnder
`VCR Code
`Setup
`0
`0
`VCR Input
`
`000
`6
`
`2
`
`Clear VCR Model Code
`
`Cancel Setup
`
`Accept
`
`Cancel Changes
`
`Continued on next page
`
`8. Press s or t to scroll to VCR
`Code; then, press to
`SELECT
`display the VCR Commander
`Instructions screen.
`
`9. Refer to the Manufacturer’s
`VCR Codes section in this
`guide to find the code choice(s)
`for your brand of VCR.
`
`10. Enter the code for your brand
`of VCR; then, press .
`SELECT
`Notes:
`• If more than one code is
`available for your brand of
`VCR, use the first code listed.
`• If the code choice has only 3
`digits, add a leading 0 (zero).
`• If you enter an incorrect
`A
`number, press ; then,
`reenter the code.
`
`10
`
`
`
`Setting Up VCR Commander Service, Continued
`
`11. Wait for the test process to
`complete and the power to your
`VCR to turn on.
`12. Did the power to your VCR
`turn on?
`A
`• If yes, press .
`• If no, choose one of the
`following:
`– There are additional code
`choices for your brand of
`B
`VCR; press and repeat
`steps 8 through 10 using
`the next code in your list
`of choices.
`– There are no additional
`code choices for your
`brand of VCR, go to step 16.
`
`13. Insert a blank tape into your
`VCR and turn the VCR off;
`then, press to begin
`SELECT
`a recording test.
`
`14. Wait for the recording process
`to begin.
`
`General Settings
`Highlight a SETUP, press SELECT to advance to next setting.
`VCR Commander
`SETUP
`Instructions
`
`PREFERENCE
`
`Set: VCR Comnder
`Setup
`
`VCR Input
`Please wait during the test process.
`VCR Code
`000
`VCR Input
`
`Accept
`
`Cancel Changes
`
`General Settings
`Highlight a SETUP, press SELECT to advance to next setting.
`VCR Commander
`PREFERENCE
`SETUP
`Instructions
`To test RECORD with VCR model 062:
`(cid:129) Insert a blank tape into your VCR.
`VCR Input
`(cid:129) Turn your VCR off.
`Set: VCR Comnder
`(cid:129) To begin recording, press SELECT.
`VCR Code
`000
`Setup
`VCR Input
`
`Cancel Setup
`
`Accept
`
`Cancel Changes
`
`General Settings
`Highlight a SETUP, press SELECT to advance to next setting.
`VCR Commander
`SETUP
`Instructions
`
`PREFERENCE
`
`VCR Input
`Please wait for the recording process to begin.
`Set: VCR Comnder
`VCR Code
`000
`Setup
`VCR Input
`
`Accept
`
`Cancel Changes
`
`PREFERENCE
`
`General Settings
`Highlight a SETUP, press SELECT to advance to next setting.
`VCR Commander
`Instructions
`SETUP
`If your VCR is recording, setup is complete.
`The VCR model code is 062.
`Press SELECT to return to General Settings.
`VCR Input
`Set: VCR Comnder
`VCR Code
`000
`Setup
`If your VCR is NOT recording, press "A" to enter
`VCR Input
`another VCR Model Code, OR press "C" and record from
`your VCR manually.
`Clear VCR Model Code
`Accept
`
`Cancel Setup
`Cancel Changes
`
`Continued on next page
`
`11
`
`
`
`Setting Up VCR Commander Service, Continued
`
`15. Did the VCR begin recording?
`• If yes, the VCR Commander
`service setup is complete.
`Press to return to the
`SELECT
`General Settings menu.
`
`A
`• If no, press and choose
`one of the following:
`– There are additional code
`choices for your brand of
`VCR; enter the next code
`in your list of choices and
`SELECT
`press . Then, repeat
`steps 11 through 15.
`– There are no additional
`code choices for your
`brand of VCR, go to step 16.
`
`16. If none of the codes turn on
`the VCR power and start the
`recording, enter code 0000;
`SELECT
`then, press .
`Note: The entire VCR code
`library will be scanned. This
`process can take several
`minutes.
`
`PREFERENCE
`
`CURRENT STATUS
`
`General Settings
`Highlight a Preference, press SELECT to change its setting(s).
`Set: Bypass
`Set: Color Scheme
`Set: Output Chan
`Set: VCR Comnder
`Timer: All
`Timer: Remind New
`Timer: Sleep
`
`Enabled
`
`PREFERENCE
`
`General Settings
`Highlight a SETUP, press SELECT to advance to next setting.
`VCR Commander
`SETUP
`Instructions
`Please power OFF your VCR.
`Enter the Model Code for your VCR or 000,
`VCR Input
`then press SELECT.
`Set: VCR Comnder
`VCR Code
`000
`Setup
`VCR Input
`Clear VCR Model Code
`Accept
`
`Cancel Setup
`Cancel Changes
`
`PREFERENCE
`
`General Settings
`Highlight a SETUP, press SELECT to advance to next setting.
`VCR Commander
`SETUP
`Instructions
`Please power OFF your VCR.
`Enter the Model Code for your VCR or 0000,
`VCR Input
`then press SELECT.
`Set: VCR Comnder
`VCR Code
`000
`Setup
`0
`0
`0
`VCR Input
`Clear VCR Model Code
`Accept
`
`0
`Cancel Setup
`Cancel Changes
`
`12
`
`Continued on next page
`
`
`
`Setting Up VCR Commander Service, Continued
`
`17. Wait for the test process to
`complete.
`
`General Settings
`Highlight a SETUP, press SELECT to advance to next setting.
`VCR Commander
`SETUP
`Instructions
`
`PREFERENCE
`
`Set: VCR Comnder
`Setup
`
`VCR Input
`Please wait during the test process.
`VCR Code
`000
`VCR Input
`
`Accept
`
`Cancel Changes
`
`18. Press slowly and
`SELECT
`repeatedly, and wait for the
`VCR power to turn on; then,
`press to begin the recording
`A
`test process.
`Note: If the power to the VCR
`does not turn on, call your cable
`service provider for help.
`
`PREFERENCE
`
`General Settings
`Highlight a SETUP, press SELECT to advance to next setting.
`VCR Commander
`SETUP
`Instructions
`If your VCR is ON, press "A" to test recording.
`VCR Input
`Set: VCR Comnder
`If your VCR is NOT ON, press SELECT to try the
`VCR Code
`000
`Setup
`next VCR model code.
`VCR Input
`Cancel Setup
`VCR is ON
`Cancel Changes
`
`Accept
`
`13
`
`
`
`Scheduling VCR Recording
`
`One-Touch Recording
`You can instantly record the current program using your remote
`control.
`1. Turn on the power to your
`Explorer DHCT.
`SETTINGS
`2. Press once while
`viewing a full-screen TV
`program.
`3. Press s or t to scroll to the Start
`Recording...Now option.
`
`Quick Settings
`Highlight an option, then press SELECT.
`Choose SAP Language
`English
`Start Recording HGTV2 Now
`Set Sleep Timer
` OFF
`(minutes)
`More Settings
`Return to TV
`EXIT
`
`4. Press to setup the
`SELECT
`recording process.
`Note: If the VCR Input option
`was set correctly in the General
`Settings VCR Commander
`Service Setup, you will see
`instructions for selecting the
`Input option of your VCR.
`5. Put a blank tape in your VCR.
`6. Turn off the power to your VCR.
`7. Press to start recording
`SELECT
`the program. The DHCT
`displays rEc, which indicates
`that the recording process is
`preventing you from using most
`of the keys on the remote
`control. This ensures that your
`recording will not be
`interrupted accidentally.
`
`14
`
`Recording Alert
`
`Be sure there is a tape in your VCR,
`and then turn your VCR off.
`
`START Recording
`
`Cancel Recording
`
`Recording Alert
`
`Be sure there is a tape in your VCR,
`set your VCR Input to S-Video or S-VHS,
`and then turn your VCR off.
`
`START Recording
`
`Cancel Recording
`
`Continued on next page
`
`
`
`Scheduling VCR Recording, Continued
`8. Verify that the DHCT power is
`on by checking the LED under
`the Power button on the front
`panel. If the LED is not
`POWER
`illuminated, press or
`CBL
` on your remote control.
`9. Press to stop recording.
`EXIT
`
`S-A
`01
`Welcome to...
`Thu 2:00 - 6:00pm
`Welcome to Scientific-Atlanta
`
`Using the IPG
`You can program your VCR to record future TV programs,
`directly from the IPG, using your remote control. You can select
`up to eight programs to record.
`1. Turn on the power to your
`Explorer DHCT.
`2. Press . The IPG appears.
`GUIDE
`3. Press the arrow keys to locate
`and highlight the future
`program you want to record;
`SELECT
`then, press .
`
`101 Thu 9/23 4:52pm
`A Civil Action
`A Civil Action
`The 24 Hour Woman
`Welcome to Scientific-Atlanta
`Oprah Winfrey
`Channel 2 Action News
`Queen Latifah
`Ricki Lake
`Date
`
`4:30pm
`
`5:00pm
`
`5:30pm
`
`THU 9/23
`
`CHANNEL
`
`TVN7
`TVN8
`S-A
`WSB
`WATL
`
`507
`508
`1
`2
`3
`Browse By
`
`4. Press s or t to scroll to Set a
`VCR Timer for...; then,
`press to set the timer.
`SELECT
`The programs for which you set
`timers are highlighted in red,
`and the red REC icon indicates
`that a VCR timer is set.
`
`AHN
`101
`Aerobic Conditioning
`Thu 6:00 - 6:30pm
`(30 minutes) Exercise Health
`
`101 Thu 9/23 4:52pm
`Future Program Options
`Set a VCR Timer for "Aerobic Conditioning"
`Set a Reminder Timer for "Aerobic Conditioning"
`Tune Ch 101, AHN, immediately
`Return to Guide
`
`AHN
`101
`Aerobic Conditioning
`Thu 6:00 - 6:30pm
`(30 minutes) Exercise Health
`
`101 Thu 9/23 4:52pm
`
`CHANNEL
`
`99
`ATH43
`ATH42 100
`AHN
`101
`GOOD 102
`ZDTV
`103
`Browse By
`
`6:30pm
`
`6:00pm
`
`Denise Calls Up
`House Doctor
`Hands On
`Aerobic
`The Method
`Tony Orlando and Dawn Rainbow
`Silicon Spin
`Zip File
`Date THU 9/23
`
`7:00pm
`
`This Old House
`Medical Report
`Twelve O'Clock Hi
`Call for Help
`
`Continued on next page
`
`15
`
`
`
`Scheduling VCR Recording, Continued
`5. Press to return to the TV
`EXIT
`program.
`6. Put a blank tape in your VCR.
`7. Turn off the power to the VCR.
`Note: When you set a timer
`from the IPG, you are setting a
`one-time only timer for that
`program. See Using the VCR
`Timer for information about
`setting 7-day, weekday only,
`weekend only, or single-day
`timers.
`
`AHN
`101
`Aerobic Conditioning
`Thu 6:00 - 6:30pm
`(30 minutes) Exercise Health
`
`101 Thu 9/23 4:52pm
`Future Program Options
`Tune Ch 101, AHN, immediately
`Set a VCR Timer for "Aerobic Conditioning"
`Set a Reminder Timer for "Aerobic Conditioning"
`Return to Guide
`
`Continued on next page
`
`16
`
`
`
`Scheduling VCR Recording, Continued
`Using the VCR Timer
`The VCR timer sets your VCR Commander service to record
`programs at specific days and times. Use your remote control to
`set the channel, day, start time, and stop time of the program or
`programs you want to record. You can select/choose up to eight
`timers including the timers set from the IPG.
`Important: Do not overlap program times when setting up the
`VCR timer. A program that you set to record will not begin
`recording until the previous VCR timer event has stopped.
`
`1. Turn on the power to your
`Explorer DHCT.
`2. Press twice while
`SETTINGS
`viewing a full-screen TV
`program.
`
`3. Press s or t to scroll to the
`Timer: VCR New option; then,
`press .
`SELECT
`
`PREFERENCE
`
`CURRENT STATUS
`CURRENT FAVORITES:
`37 TWC
`
`General Settings
`Highlight a Preference, press SELECT to change its setting(s).
`Timer: Turn Off
`Timer: VCR New
`Timer: Wake-Up
`Viewer: Favorites
`Viewer: Power On
`Audio: Digital Out
`Audio: Range
`
`1 Total Favorites
`
`PREFERENCE
`
`CURRENT STATUS
`
`General Settings
`Highlight a Preference, press SELECT to change its setting(s).
`Timer: Remind New
`Timer: Sleep
`Timer: Turn Off
`Timer: VCR New
`Timer: VCR 1
`Timer: VCR 2
`Timer: Wake-Up
`
`6 Available
`
`Continued on next page
`
`17
`
`
`
`Scheduling VCR Recording, Continued
`
`PREFERENCE
`
`CHAN
`
`DAY
`
`START
`
`STOP
`
`General Settings
`Highlight a START TIME, press SELECT to go to next setting.
` 7
` 8
` 9
`6 : 0 0 pm
` 1
` 2
`Tomorrow Never Dies 6:00pm-8:00pm
`Cancel Changes
`Accept
`
`Timer: VCR 1
`
`225 SHOE
`
`Sun 2/13
`
`8 : 0 0 pm
`
`PREFERENCE
`
`General Settings
`Highlight a START TIME, press SELECT to go to next setting.
`VCR Timer Alert
`CHAN
`DAY
`START
` 7
`Before this program starts:
` 8
`(cid:129) Put a tape in your VCR.
` 9
`(cid:129) On your VCR, set the input to Audio-Video
`Timer: VCR 1
`6 : 0 0 pm
`225 SHOE
`Sun 2/13
`(cid:129) Turn your VCR off.
` 1
` 2
`Continue
`Tomorrow Never Dies 6:00pm-8:00pm
`Cancel Changes
`Accept
`
`STOP
`
`8 : 0 0 pm
`
`Continued on next page
`
`4. Follow the on-screen
`instructions to set the recording
`time. Refer to your Interactive
`Program Guide for Explorer®
`Digital Home Communications
`Terminal User’s Guide for
`detailed instructions to
`set the VCR Timer.
`
`5. Press to accept the timer
`A
`settings.
`6. Put a blank tape in your VCR;
`then, set the Input option you
`selected on your VCR.
`7. Turn off the VCR.
`SELECT
`8. Press to set the timer;
`EXIT
`then, press to return to the
`TV program.
`
`18
`
`
`
`Scheduling VCR Recording, Continued
`Clearing a VCR Timer
`You can delete a scheduled VCR Timer program from the VCR
`Timer.
`
`1. Turn on the power to your
`Explorer DHCT.
`SETTINGS
`2. Press twice while
`viewing a full-screen TV
`program.
`
`3. Press s or t to scroll to the
`Timer: VCR preference number
`for the VCR Timer you want
`to delete.
`
`4. Press to clear the timer;
`C
`then, press to return to
`EXIT
`the TV program.
`Note: The program name
`appears in the current CHAN
`column.
`C
`5. Press twice to clear the
`timer.
`
`PREFERENCE
`
`CURRENT STATUS
`CURRENT FAVORITES:
`37 TWC
`
`General Settings
`Highlight a Preference, press SELECT to change its setting(s).
`Timer: Turn Off
`Timer: VCR New
`Timer: Wake-Up
`Viewer: Favorites
`Viewer: Power On
`Audio: Digital Out
`Audio: Range
`
`1 Total Favorites
`
`PREFERENCE
`
`CURRENT STATUS
`
`General Settings
`Highlight a Preference, press SELECT to change its setting(s).
`Timer: Sleep
`Timer: Turn Off
`Timer: VCR New
`Timer: VCR 1
`Timer: VCR 2
`Timer: Wake-Up
`Viewer: Favorites
`Clear VCR Timer 1
`
`225 SHOE Sun 2/13 6:00pm 8:00pm
`
`PREFERENCE
`
`CHAN
`
`DAY
`
`START
`
`STOP
`
`General Settings
`Highlight a CHANNEL, press SELECT to go to next setting.
`220 Bravd
`222 HGTV2
`224 ESPNC
`225 SHOE
`226 SH2E2
`227 SHO3E
`Tomorrow Never Dies 6:00pm-8:00pm
`Cancel Changes
`Accept
`
`Timer: VCR 1
`
`Sun 2/13 6 : 0 0 pm 8 : 0 0 pm
`
`19
`
`
`
`Manufacturer’s VCR Codes
`
`Find the code for your brand of VCR and use this code in Setting
`Up the VCR Commander Service procedure. Start with the first
`code in the list and continue through the choices. The most
`common codes are listed first.
`VCR Brand Name Code
`Action
`331
`Admiral
`062, 562
`Advantz
`370
`Adventura
`014
`Aiko
`292, 792
`Aiwa
`014, 051, 420, 450, 482, 551, 651, 751, 851
`Akai
`067, 055, 063, 075, 120, 170, 256, 555, 655, 755
`American High
`049
`Asha
`254, 754, 854
`Audiovox
`051, 551, 651, 751, 851
`Beaumark
`254, 754, 854
`Bell & Howell
`118, 618, 718
`Broksonic
`016, 135, 198, 223, 225, 309, 375, 493, 516,
`635, 698, 723, 893
`086, 292, 586, 792
`051, 551, 651, 751, 851
`049, 116, 181
`034, 534
`095, 160
`292, 792
`051, 292, 551, 651, 751, 792, 851
`086, 586
`051, 061, 086, 254, 285, 551, 561, 586, 651, 751,
`754, 851, 854
`049, 055, 069, 074, 176, 555, 655, 755
`065, 254, 754, 854
`034, 031, 059, 101, 292, 534, 559, 792
`034, 534
`056, 058, 556, 558
`014
`051, 551, 651, 751, 851
`
`Curtis Mathes
`Cybernex
`Daewoo
`Daytron
`Denon
`Dynatech
`Electrohome
`
`CCE
`Calix
`Canon
`Capehart
`Carver
`Cineral
`Citizen
`Colt
`Craig
`
`20
`
`Continued on next page
`
`
`
`Manufacturer’s VCR Codes, Continued
`
`VCR Brand Name Code
`Electrophonic
`051, 551, 651, 751, 851
`Emerex
`046, 546
`Emerson
`014, 016, 050, 051, 057, 075, 082, 102, 135, 198,
`222, 223, 225, 226, 292, 308, 309, 375, 493, 516,
`524, 551, 557, 635, 651, 657, 698, 723, 751, 792,
`824, 851, 893
`061, 068, 080, 118, 561, 618, 718
`Fisher
`047, 049, 547
`Fuji
`014
`Funai
`062, 049, 069, 074, 079, 216, 254, 562, 754, 854
`GE
`014
`Garrard
`246, 293, 364, 446, 540
`Go Video
`032, 051, 052, 494, 551, 651, 751, 851, 894
`GoldStar
`014, 022, 422, 522
`Gradiente
`209
`Grundig
`061, 561
`HI-Q
`Harley Davidson 014
`Harman/Kardon 052, 089
`Harwood
`082, 086, 586
`Headquarter
`060, 560
`Hitachi
`014, 055, 056, 058, 079, 096, 119, 180, 249,
`306, 555, 556, 558, 596, 655, 755
`081, 083, 022, 055, 220, 221, 398, 522, 555, 581,
`583, 655, 720, 721, 755, 898
`055, 555, 655, 755
`051, 292, 551, 651, 751, 792, 851
`086, 586
`081, 083, 052, 055, 398, 555, 581, 583, 655, 755,
`898
`049, 051, 551, 651, 751, 851
`051, 551, 651, 751, 851
`014, 222
`086, 586
`049
`057, 075, 254, 557, 657, 754, 854
`
`Kodak
`LXI
`Lloyd’s
`Logik
`MEI
`MGA
`
`JVC
`
`Jensen
`KEC
`KLH
`Kenwood
`
`Continued on next page
`21
`
`
`
`Manufacturer’s VCR Codes, Continued
`
`VCR Brand Name Code
`MGN Technology
`254, 754, 854
`MTC
`014, 254, 754, 854
`Magnasonic
`292, 792
`Magnavox
`014, 049, 053, 095, 117, 163, 553
`Magnin
`254, 754, 854
`Marantz
`049, 095, 160, 175
`Marta
`051, 551, 651, 751, 851
`Matsushita
`049, 176
`Memorex
`060, 062, 014, 049, 051, 053, 061, 118, 176, 254,
`282, 313, 551, 553, 560, 561, 562, 618, 651, 718,
`751, 754, 851, 854
`056, 119, 058, 556, 558
`081, 083, 062, 057, 075, 089, 187, 228, 256,
`457, 557, 562, 581, 583, 657, 687
`062, 049, 562
`014, 086, 586
`072
`081, 083, 052, 054, 055, 064, 096, 118, 471,
`555, 581, 583, 596, 618, 655, 718, 755
`051, 551, 651, 751, 851
`048, 267, 548
`254, 754, 854
`240, 049
`072, 062, 051, 118, 176, 446, 551, 562, 618, 651,
`718, 751, 851
`076
`016, 198, 309, 493, 516, 698, 893
`240, 049, 091, 116, 176, 239, 241, 260, 392
`049, 051, 052, 054, 056, 058, 068, 254, 551, 556,
`558, 651, 751, 754, 851, 854
`056, 058, 079, 119, 556, 558
`049, 223, 493, 723, 893
`049, 076, 095, 417
`051, 551, 651, 751, 851
`081, 072, 083, 176, 182, 581, 583
`
`Minolta
`Mitsubishi
`
`Motorola
`Multitech
`NAD
`NEC
`
`Nikko
`Nikon
`Noblex
`Olympus
`Optimus
`
`Optonica
`Orion
`Panasonic
`Penney
`
`Pentax
`Philco
`Philips
`Pilot
`Pioneer
`
`22
`
`Continued on next page
`
`
`
`Manufacturer’s VCR Codes, Continued
`
`Radio Shack
`Radix
`Randex
`Realistic
`
`Ricoh
`Runco
`STS
`Salora
`Samsung
`Sanky
`Sansui
`
`VCR Brand Name Code
`Portland
`034, 534
`Profitronic
`254, 754, 854
`Proscan
`069, 074, 216
`Protec
`086, 586
`Pulsar
`053, 065, 553
`Quarter
`060, 560
`Quartz
`060, 169, 560, 669
`Quasar
`049, 091, 176
`RCA
`062, 049, 056, 058, 069, 074, 079, 091, 119, 120,
`163, 216, 254, 291, 467, 556, 558, 562, 754, 854
`014, 051, 551, 651, 751, 851
`051, 551, 651, 751, 851
`051, 551, 651, 751, 851
`060, 062, 014, 049, 051, 061, 076, 080, 118,
`551, 560, 561, 562, 618, 651, 718, 751, 851
`048, 267, 548
`053, 553
`056, 058, 556, 558
`089
`067, 059, 065, 254, 559, 754, 854
`062, 053, 553, 562
`081, 083, 014, 055, 096, 285, 493, 555, 581, 583,
`596, 655, 755, 893
`060, 061, 118, 254, 282, 386, 560, 561, 618, 718,
`754, 854
`057, 059, 135, 198, 224, 225, 226, 559, 635, 698
`060, 014, 049, 051, 056, 058, 061, 068, 071, 080,
`118, 119, 551, 556, 557, 558, 560, 561, 618, 651,
`657, 718, 751, 851
`059, 559
`062, 076, 562
`086, 586
`065, 254, 754, 854
`086, 586
`
`Sanyo
`
`Scott
`Sears
`
`Semp
`Sharp
`Shintom
`Shogun
`Singer
`
`Continued on next page
`
`23
`
`
`
`Manufacturer’s VCR Codes, Continued
`
`VCR Brand Name Code
`Sony
`048, 047, 014, 025, 036, 046, 049, 267, 289,
`546, 547, 548
`267
`014, 049, 057, 095, 117, 557, 657
`014
`050, 222, 254, 754, 854
`055, 555, 655, 755
`014, 055, 555, 655, 755
`049, 176, 260
`014, 049, 051, 066, 551, 651, 751, 851
`014
`057, 059, 071, 080, 224, 226, 380, 557, 559, 657
`051, 254, 551, 651, 751, 754, 851, 854
`254, 754, 854
`059, 559
`052, 054
`054, 059, 075, 235, 559
`254, 754, 854
`062, 014, 049, 056, 058, 061, 069, 074, 076, 086,
`095, 163, 175, 226, 254, 556, 558, 561, 562, 586,
`754, 854
`
`Sunpak
`Sylvania
`Symphonic
`TMK
`Tatung
`Teac
`Technics
`Teknika
`Thomas
`Toshiba
`Totevision
`Unitech
`Vector
`Vector Research
`Video Concepts
`Videosonic
`Wards
`
`White
`Westinghouse
`XR-1000
`Yamaha
`Zenith
`
`292, 792
`014, 049, 086, 586
`052
`048, 047, 014, 053, 547, 548, 553
`
`24
`
`
`
`Troubleshooting
`
`Check the following list for possible problems. If a problem
`occurs, you may be able to easily resolve it before calling your
`cable service provider.
`
`Message
`or Problem
`VCR Commander
`service did not
`turn on the power
`to the VCR for the
`scheduled
`recording and/or
`did not begin
`recording.
`
`The VCR
`Commander Menu
`option does not
`appear on the screen.
`After entering
`your VCR code,
`the VCR will not
`turn on.
`
`Possible
`Cause
`A blank tape is
`not in the VCR.
`The VCR is not off.
`The IR Blaster
`is improperly
`positioned.
`
`VCR Timer is
`improperly set.
`
`Your DHCT is not
`authorized for VCR
`Commander service.
`
`The VCR code is
`incorrect.
`
`Your VCR
`powered on
`but did not
`begin recording.
`
`A blank tape is
`not in the VCR.
`The incorrect VCR
`code was entered.
`
`You recorded an
`on-screen message
`(blocked barker),
`which states the
`channel was not
`authorized.
`
`The channel, time, or
`rating was blocked
`after the program
`timer was set.
`Program became
`blocked after One-
`Touch recording
`started.
`
`Check and
`Correct
`Insert a blank tape.
`
`Power off the VCR.
`Move the IR Blaster around until
`you are in front of or within 3
`inches of the sensor window on
`the VCR.
`See Using the VCR Timer
`in the Scheduling VCR
`Recording section.
`Call your cable service
`provider.
`
`Try another VCR code for
`your VCR brand or enter
`0000. See the instructions in
`the section on Setting Up the
`VCR Commander Service.
`Insert a blank tape.
`
`Try another VCR code for
`your VCR brand or enter
`0000. See the instructions in
`the section on Setting Up the
`VCR Commander Service.
`Blocking should be done
`before setting the program
`timer.
`
`Make sure Parental Control
`is off before starting a One-
`Touch recording.
`
`25
`
`
`
`FCC Compliance
`
`This equipment has been tested and found to comply with the
`applicable limits of Part 15 of FCC Rules. These limits are
`designed to provide reasonable protection against harmful
`interference in a residential installation.
`This equipment generates, uses, and can radiate radio frequency
`energy and, if not installed and used in accordance with the
`instructions, may cause harmful interference to radio or television
`reception, which can be determined by turning this equipment off
`or on. The user is encouraged to try to correct the interference by
`one or more of the following measures.
`• Reorient or relocate the receiving antenna.
`• Increase the separation between this equipment and the
`receiver.
`• Consult your cable service provider or an experienced radio/
`television technician for help.
`
` Caution:
`Any changes or modification to this equipment not
`expressly approved by Scientific-Atlanta could void the
`user’s authority to operate this equipment.
`
`26
`
`
`
`NotesNotes
`
`27
`
`27
`
`27
`
`
`
`Scientific-Atlanta, Inc., Scientific Atlanta, the Scientific-Atlanta logo and
`Explorer are registered trademarks of Scientific-Atlanta, Inc.
`VCR Commander is a trademark of Scientific-Atlanta, Inc.
`Product and service availability are subject to change without notice.
`
`All other trademarks shown are trademarks of their respective owners.
`
`United States: Scientific-Atlanta, Inc., 4261 Communications Drive,
`P. O. Box 6850, Norcross, GA 30091-6850; Tel: 770-903-5000;
`TWX: 810-799-4912; Telex: 0542898
`Europe: Scientific-Atlanta Western Europe Limited, Home Park Estate,
`Kings Langley, Herts WD4 8LZ, England; Tel: +44-1-923-266133;
`Fax: +44-1-923-269018
`Asia-Pacific: Scientific-Atlanta (HK), Ltd., Suite 56-57, 5/F New Henry
`House, 10 Ice House Street, Central, Hong Kong; Tel: 852-2522-5059;
`Fax: 852-2522-5624
`www.scientificatlanta.com
`© 2000 Scientific-Atlanta, Inc.
`Printed in USA
`Part No. 738164 Rev A
`
`All rights reserved.
`
`September 2000
`
`®
`
`28
`
`