`
`NDKIA®
`9000i
`
`OWNER’S MANUAL
`
`Page 1 of 72
`
`SAMSUNG EXHIBIT 1026
`
`RIM v. MMI
`|PR2013-00036
`Exhibit 1030. D. 1
`
`RIM v. MMI
`IPR2013-00036
`Exhibit 1030, p. 1
`
`Page 1 of 72
`
`SAMSUNG EXHIBIT 1026
`
`
`
`or install equipment. Use only approved
`accessories and batteries.
`
`INTERFERENCE All mobile phones may
`get interference which could affect
`performance.
`EMERGENCY CALLS Close the device
`cover. If the phone interface is not on,
`switch it on (press the (D key). Hold 0
`briefly to clear the display. Enter the
`emergency number, then press (I
`Give your location and mobile number.
`Do not end the call until told to do so.
`
`MAKE BACKUP COPIES Remember to
`make backup copies of all important
`data.
`
`INFRARED PRECAUTIONS Do not
`point the IR beam at anyone's eye or al—
`low it to interfere with other IR devices.
`
`CONNECTING TO OTHER DEVICES
`When connecting the communicator to
`any other device. read its user's guide
`for detailed safety instructions. Do not
`connect incompatible products.
`
`I
`
`
`
`use the communicator while drivmg;
`park!
`
`SWITCH OFF IN HOSPITALS Follow
`any regulations or rules. SWItch off
`near medical equment.
`
`USE SENSIBLY Use only in the normal
`position (to ear). Don't touch the an—
`tenna unnecessarily.
`SWITCH OFF WHEN REFUELING
`Don't use the phone interface at a
`refueling point.
`
`SWITCH OFF NEAR BLASTING Always
`follow special regulations. Don't use
`near chemicals, fuel, etc.
`MAKING CALLS VIA THE PHONE
`INTERFACE Close the cover and switch
`on the phone interface. Enter the phone
`number, including the area code, then
`press (“.To end a call pressl: To
`answer a call press ’.
`
`The GEOSG’ software of this product includes Nimbus (1 from Digital Typeface Corp and typefaces from URW, GmbH.
`General Software, Inc
`This device contains Embedded BlOSlTMJ software Copyright T995 General Software, Inc Embedded BIOS and General Software are trademarks of
`
`This devrce contains TrueFFSlR) Flash File System software Copyright 1995 M-Systerns Flash Disk Pioneers Ltd TrueFFS Is a registered trademark of M-
`Systems Flash Disk Pioneers Ltd , and the TrueFFSlR) Flash File System software Is protected by US Patent No 5,404,485,
`Class 1 fax drivers copyrrght© 1992—1935 Global Village Communication, Inc
`HP Database Engine Version 1 O copyright© Hewlett—Packard Company 1994 All rights reserved
`The PPP software 15 copyright 0 1991. 1992, 1993. 1994 Morning StarTechnologIes, all rights reserved It contains software developed at Carnegie
`Mellon Universrty, which is copyright‘9 1989 Carnegie Mellon UniverSIty, all rights reserved It contains software developed at the University of
`California, Berkeley, which Is copyright©1989 Regents of the University of California, all rights reserved It contains software that IS copyright o 1990.
`RSA Data Security, Inc , all rights reserved
`C—client Internet mail routines original version copyright 1988 by the Leland Stanford Junior UniverSIty. copyright 1995 by the Universrry of Washington
`The University of Washington and the Leland Stanford Junior University disclaim all warranties, express or implied, With regard to this softwareI
`including Without limitation all Implied warranties of merchantability and fitness for a particular purpose, and In no event shall the University of
`Washington or the Leland Stanford Junior University be liable for any special, Indirect or consequential damages or any damages whatsoever resulting
`‘rorn loss of use, data or profits, whether In an action of contract, tort (including negligence] or strict liability, arismg out of or in connection With the
`use or performance of this software
`This product Includes software based in part on the work of the Independent JPEG group
`CellularWare is a trademark of Nokia Mobile Phones
`AT IS a trademark of Hayes Microcomputer Products, Inc
`Hayes is a registered trademark of Hayes Microcomputer Products, Inc
`Microsoft and M57005 are registered trademarks and Windows Is a trademark of Microsoft corporation
`Geoworks® and GEOS® are Registered deemarks of Geoworks, and GeoDOS is a Trademark of Geoworks In the United States of America and other
`countries
`
`C€
`The products described in this manual conform to the European Council directives EMC Directive [89/3361EECI and TTE Directive [91(263/EEC}
`
`9357106
`Issue 1.1 US
`
`Page 2 of 72
`
`RIM v. MMI
`IPR2013-00036
`Exhibit 1030, p. 2
`
`Page 2 of 72
`
`
`
`First start-up ....................................... 2—1
`SIM card .......................................... 2—2
`Connectors ........................................ 2—4
`Battery ........................................... 2—4
`Communicator interface ............................. 2-7
`Communicator applications .......................... 2—9
`indicators ........................................ 2—10
`Special features ................................... 2-12
`Useful settings information .......................... 2—15
`3. Contacts
`
`4.
`
`5.
`
`6.
`
`Contacts settings ................................... 3—1
`Contact cards ...................................... 3—2
`Records ........................................... 3—5
`
`Telephone
`Telephone settings .................................. 4—1
`Making a call ...................................... 4—4
`Conference call ..................................... 4—7
`Fax
`
`Fax settings ........................................ 5—1
`Sending faxes ...................................... 5—3
`Received faxes ..................................... 5-4
`
`Short messages
`SMS settings ....................................... 6—2
`Sending messages .................................. 6—3
`Received messages .................................. 6—5
`Business cards ..................................... 6—6
`
`
`
`WWW settings .................................... 7—11
`Hotlist .......................................... 7—12
`Connecting to WWW .............................. 7—12
`Telnet ....................................... 7-16
`Define Telnet connections .......................... 7—1 6
`
`Terminal ..................................... 7—1 8
`Define Terminal connections ........................ 7—l8
`
`8. Notes
`
`Notes settings ..................................... 8—1
`Sending documents ................................. 8—3
`Printing documents ................................. 8—4
`
`9.
`
`Calendar
`
`Calendar settings .................................. 9—1
`Monthly schedule .................................. 9-1
`Daily schedule ..................................... 9—2
`Weekly schedule ................................... 9—4
`Calendar booking .................................. 9—5
`To-do list ......................................... 9—6
`
`10. System
`System settings ................................... 10—1
`Security ......................................... lO—2
`User data ........................................ 10—5
`Fax modem ...................................... 10—5
`Connecting to a PC ................................ iO-6
`File transfer ...................................... 10—6
`install/Remove software ............................ 10—8
`Backup/Restore ................................... 10—8
`Import/Export contacts ............................. 10—9
`
`Page 3 of 72
`
`RIM v. MMI
`IPR2013-00036
`Exhibit 1030, p. 3
`
`Page 3 of 72
`
`
`
`Wireless data backup ............................... 11—8
`
`12. Document outbox
`
`13. Phone interface
`
`Display indicators .................................. 13—2
`Making a call ..................................... 13—3
`Receiving a call ................................... 13—3
`Sending DTMF tones ............................... 13—3
`Using memory ..................................... 13—4
`Menu shortcuts ................................... 13—6
`Detailed menus list ................................ 13—8
`Help ............................................ 13—15
`
`14. Troubleshooting
`Communicator activation and system trouble ........... 14—1
`Establishing communication ......................... 14—2
`Connectivity and printing ........................... 14—4
`Miscellaneous ..................................... 14—5
`
`15. Care and maintenance
`
`Warranty information .............................. 15-1
`
`16.
`
`Important safety information
`Facts about wireless data transmission ................ 16—3
`
`17.
`
`Index
`
`tor, with a mobile phone, messaging device, In—
`ternet access terminal and palmtop organizer all
`in one compact unit, is more than just the sum
`of its components. The communicator applica—
`tions are designed to work together to provide
`you with the information you need when you
`need it. where you need it
`This introduction helps you understand how the
`Nokia 9000i Communicator operates.
`
`
`
`
`
`
`
`
`
`/®
`
`@\,
`
`
`
`
`
`monly used functions and their corresponding
`pathways is found at the end of Chapter 2.
`The rest of this manual deals with the communi—
`cator interface applications and the phone inter-
`face functions.
`
`lfyou are an experienced mobile phone and mo-
`bile of'fice user, read at least this introductory
`chapter and the "Getting started " chapter. Basic
`information about the communicator applica—
`tions is always available in the context sensitive
`help, which can be activated by pressing the Help
`button on the communicator interface keyboard.
`
`The phone and communicator interfaces
`The Nokia 9000i Communicator has two inter—
`faces. The phone interface [Figure 1—1] is on the
`
`
`
`Figure 17 1: Phone Interface
`
`Figure 1—2.' Communicator interface
`
`Page 4 of 72
`
`RIM v. MMI
`IPR2013-00036
`Exhibit 1030, p. 4
`
`Page 4 of 72
`
`
`
`
`
`IMPORTANT! Do not switch on the phone
`interface when mobile phone use is prohib—
`ited or when it may cause interference or
`
`
`danger (see Chapter 16 "Important safety
`
`information" on page 16—1.
`The phone interface is designed for quickly mak-
`ing and receiving calls. It looks and operates like
`other Nokia mobile phones (except that the ear—
`piece and microphone are on the backside ofthe
`device). The phone interface is switched on and
`off by pressing the ® button on the cover
`
`dustry Canada can require you to stop using your
`communicator if such interference cannot be
`eliminated. If you need assistance, contact your
`home network operator.
`This device complies with part 15 of the FCC
`rules. Operation is subject to the condition
`that this device does not cause harmful
`interference.
`Caution: Changes or modifications not expressly
`approved by Nokia could void the user's authority
`to operate the equipment.
`
`
`
`Things to remember
`
`Services
`
`In order to utilize the communication capabilities
`of the Nokia 9000i Communicator, you may have
`to subscribe to certain services, such as fax, SMS
`or data services. separately. If the service requires
`a separate phone number or specific settings for
`any of these services, they must be stored in the
`communicator's settings. For example.
`0 To send and receive faxes, your network must
`support fax service and your SIM card must
`be activated for fax service.
`0 To use the communicator as a fax modem,
`your network must support data serVIce and
`your SIM card must be activated for data
`service.
`
`0
`
`Internet access also requires that data service
`is supported by the network you are usmg and
`activated for your SIM card. In addition, to
`access the Internet. you must have obtained
`an Internet Access Point from an Internet
`service provider [contact your retailer for
`details).
`
`Access codes
`The communicator uses several access codes to
`protect against unauthorized use ofyour commu—
`nicator and the SIM card. You can make changes
`to the lock code, PIN and PUK codes from the
`communicator interface in the Security applica-
`tion by pressing Settings. The PIN and PUK codes
`can also be changed Via the phone interface usmg
`Menu 5.
`
`Personal Identity Number (PIN) code (provided
`with the SIM card). The access codes are de-
`scribed in more detail in Chapter 10 "System:
`Security" on page 10—2. See also Chapter 13
`"Phone interface: Detailed menus list — Security
`options (Menu 5)" on page 1341.
`
`Contact information
`
`All the contact information (names, addresses,
`phone numbers, e—mail addresses, etc.) you store
`goes into the Contacts directory. Each applica—
`tion and interface has its own view of the Con—
`tacts directory. The information shown depends
`on the information the selected application can
`use. For example. when you are making a call via
`the phone interface, you can view the name and
`the phone number[s) of the contact — possible
`fax numbers, e—mail addresses, job titles. etc..
`are not shown.
`
`You can customize your contact information
`according to your preferences. see Chapter 3
`"Contacts: Contact cards — Customizing contact
`cards" on page 3—3. Customizing only affects
`new contact information; existing contacts will
`not be affected. If you customize your contact
`card template in an early phase, you will not
`have to edit your contact cards manually.
`
`Texts
`With the communicator interface's text editor,
`you can create new texts in many applications
`
`manager called the Document outbox. When you
`send faxes, short messages and e-mail. they al—
`ways go first to the Document outbox. The Out—
`box prepares your fax, short message or e-mail
`and then sends it through the phone interface. If
`the phone interface is off or the network signal
`strength is inadequate, the document will not be
`sent until the phone interface IS switched on and
`the signal strength is sufficient. You do not have
`to worry about whether the phone or fax called
`might be off or busy: after the first attempt, the
`Document outbox tries to send the document
`nine more times. A document will remain in the
`Document outbox until it is successfully sent or
`you cancel the send.
`The Document outbox can be accessed in the Fax,
`SMS, E—mail and Notes applications' main views,
`where it is shown at the bottom ofthe folders list.
`The Document outbox is discussed in more detail
`in Chapter 12 "Document outbox" on page 12—1.
`There is no Document inbox. When you receive
`faxes, short messages or download e—mail, they
`go directly in their own received document fold—
`ers. Each application shows a received document
`folder containing documents that can be viewed
`within that application. For example, the Fax ap—
`plication shows a Received faxes folder, the
`E-mail application shows a Received e—mail folder.
`
`Page 5 of 72
`
`RIM v. MMI
`IPR2013-00036
`Exhibit 1030, p. 5
`
`Page 5 of 72
`
`
`
`0 Extended Li—lon Battery, see the Accessories
`Guide
`- Adapter, see the Accessories Guide
`. Rapid Travel Charger, see the Accessories
`Guide
`
`a Nokia Connectivity software on diskette [see
`Chapter 10 "System: Connecting to a PC" on
`page 10-6]
`0 Puma IntelliSync and IntelliMigrate software
`on CD—ROM
`
`I RS—232 Adapter Cable, see the Accessories
`Guide
`0 A sticker with the eommunicator's serial
`number and the lock code (see Chapter 10
`"System: Security" on page 10—2)
`For information about other Nokia 9000i Com—
`municator accessories, see the Accessories Guide.
`
`see "Connectors" on page 2-4 and "Battery"
`on page 2-5.
`0 How to personalize your communicator, see
`"First start~up" on page 2-1.
`0 How the communicator operates, see
`"Communicator interface" on page 2-7 and
`"Communicator applications" on page 2—9.
`"Special features" on page 2—12 contains
`information about the common features of
`all the applications.
`"Shortcuts" on page 2—13 explains the
`shortcuts of the document applications.
`
`0
`
`0
`
`Note: In this User's Manual, the command
`names appear in bold and item names,
`entries and values shown in the applica—
`tion area are in italics.
`
`First start—up
`_—fi——
`
`The first start—up allows you to set your home
`location, the time and date, and your personal
`information.
`
`Note that whenever you open the communicator
`cover after having removed and replaced the
`battery, you will see a welcome screen while the
`device performs a self—test. The following steps,
`however, occur only the first time the communi—
`cator is activated. or after it has been reformatted.
`
`To change any of the following settings after the
`initial start-up. see "First start-up: Changing
`start-up settings" on page 2—2.
`(D lfyou have not already installed your SIM
`card, install the SIM card, as described in "SIM
`card: Installing the SIM card" on page 2—3, and
`switch on the phone interface. If you do not
`have a SIM card yet, ignore this step. Although
`you do not need a SIM card to use the commu—
`nicator interface, a SIM card is required to
`send and receive calls and documents.
`
`Page 6 of 72
`
`RIM v. MMI
`IPR2013-00036
`Exhibit 1030, p. 6
`
`Page 6 of 72
`
`
`
`2-2
`
`SIM card
`
`(2) Open the cover. This activates the communi—
`cator interface.
`
`(3 Use the scroll keys on the left ofthe screen to
`scroll to your home location in the list, then
`press the button on the right of the screen
`next to the command 0K.
`
`(9 Use the arrow keys to navigate and the back—
`space key to erase, and accept or change the
`date shown, then press UK. Date format is
`mm—dd-yy.
`(5) Accept or change the time shown and press
`OK.
`
`© Enter your personal user data and press OK.
`The start—up procedure is now completed.
`
`Changing start-up settings
`You may change any of these settings at any
`time after the initial start—up.
`To change the Home location, Date or Time:
`0) Press the Extras application key.
`(2) Scroll to Clockand press Select.
`(3) Press Settings.
`
`Home location: Highlight Home location and
`press Change. Type the first letter of the
`state you want or scroll through the list.
`Highlight your state and press UK.
`Time: Highlight Time, and enter the time.
`
`Note: To change between the 12 and 24 hour
`clock or alter the date format, go to the
`System application, press Settings, high—
`light Preferences and select Change. You
`may set the time and date format as well
`as the unit of measure from this screen.
`
`Date: Highlight Date, and enter the date.
`
`@ Select Close, then Close again to return to
`the Extras main menu.
`
`To change the User data:
`® Press the System application key.
`(3 Highlight User data and press Select.
`(3 You may change any information in your user
`data from this screen.
`
`(4) Select Close to return to the System applica—
`tion main menu.
`
`SIM card
`
`
`A SIM (Subscriber Identity Module] card is a
`"smart chip" that is used with all handsets oper—
`ating on GSM networks. The SIM contains all the
`information the GSM19OO network needs to
`identify the network user and also performs spe—
`cific functions required by the network. Among
`other things, the SIM card contains subscriber
`and billing information, makes periodic location
`updates with the network, and provides en—
`hanced security features.
`The SIM card can also store contact information.
`The number of contacts that can be stored on a
`SIM will vary from manufacturer to manufactur—
`er. The SIM memory is referred to as Memory A,
`and the phone memory as Memory B. You can
`copy contact information from one memory loca—
`
`tion to the other using the phone interface
`Menu 8 3, see Chapter 13 "Phone interface: De—
`tailed menus list — Memory functions (Menu 8)"
`on page 13-13.
`
`A valid SIM card (supplied by your network op—
`erator) is required for making and receiving calls.
`The network operator may prevent the use ofthe
`communicator with any other but the operator's
`own SIM cards. If an unacceptable SIM card is
`inserted, the message INVALID SIM CARD will be
`displayed. Should this happen. contact your re-
`tailer or network operator.
`
`Note: Keep all SIM cards out of small children’s
`reach.
`
`Chapter 2 — Getting started
`
`SIM card contents
`
`Normally, a new SIM card will not contain any
`contact information. After the personalization
`procedure, ifthe SIM does contain stored names
`or numbers, you will be asked if you want to
`copy the SIM card contents into the communi~
`cator's memory. If the phone interface is
`switched off, the question will be asked the next
`time the phone interface is on and you activate
`the communicator interface.
`
`If you do not want to copy this information, or
`want to do so at a later time, answer no. You
`may copy information between SIM and phone
`memory locations via the phone interface.
`
`Note: All phone numbers copied from the SIM
`memory to phone memory will go to the
`Telfield of the contact cards. To send SMS
`messages, the recipient's phone number
`must be in the Tel {GSM} field. Be sure all
`GSM numbers are in the Tel (GSM) field.
`(see Chapter 3 "Contacts: Contact cards -
`Customizing contact cards" on page 3—3).
`
`Installing the SIM card
`
`Before installing the SIM card, close the device
`cover and switch off the phone (use GI:
`0) Remove the battery: press the catch (1) at the
`bottom of the battery [2] and lift away the
`battery (Figure 2-1).
`
`2-3
`
`G) Slide the card into the SIM card slot
`(Figure 2—2]. Make sure that the metal
`contacts of the SIM card are facing down
`and the bevelled corner is on the right side.
`
`
`
`Figure 2—2: SIM installation
`
`When the SIM card is properly inserted into the
`SIM card slot, the bevelled corner will remain
`visible (Figure 2-3).
`
`Figure 2—3: Installed SIM card
`
`When you are 5U“? that the SIM card is correctly
`'hStallCd. replace the battery:
`0) Insert the battery so that the side with the four
`metal connector plates goes in first (Figure 2-4).
`
`
`Figure 2-4: Inserting the battery
`
`Figure 2— l: Inserting the battery
`
`® Push the battery down towards the catch un-
`til it clicks into place. Make sure the battery
`is properly installed before switching on the
`power.
`
`Page 7 of 72
`
`RIM v. MMI
`|PR2013-00036
`Exhibit 1030. D. 7
`
`RIM v. MMI
`IPR2013-00036
`Exhibit 1030, p. 7
`
`Page 7 of 72
`
`
`
`2—4
`
`Connectors
`
`Chapter 2 — Getting started
`
`2—5
`
`Note: The battery does not fit into place if the
`SIM card is not correctly installed. Do not
`force the battery into place! Check that
`
`you have inserted the SIM card into the
`slot as described above.
`
`Battery
`
`Connectors
`
`[1] erA—SIR infrared port for connecting to a PC
`or a printer (Figure 2—5]. For more information
`on infrared connections, see Chapter 10 " System:
`Connecting to a PC" 0” page lO'G'
`[2] Antenna connector for car installation
`[Figure 2—5).
`
`(3) System connector for car installation and for
`the adapter (Figure 2—6)
`(4] Adapter for connecting the charger and the
`RS—232 cable to the communicator. The connec—
`tor on the left side (5) of the adapter is for the
`RS-232 cable plug and the one on the right (6]
`is for the charger plug (Figure 2—6).
`
`(3)
`
`
`
`Figure 2-5: /r port and antenna connector
`
`Figure 2-6: Adopter connector
`
`Your Nokia 9000i Communicator is powered by a
`rechargeable Lithium—Ion battery. The Extended
`Li—lon Battery provides up to three hours of talk/
`fax/terminal time or up to 30 hours of standby
`time. Use only batteries approved by the com-
`municator manufacturer.
`
`Charging the battery
`Use only those chargers approved by the commu-
`nicator manufacturer for charging a Lithium—Ion
`battery. The communicator can be used during
`charging. To charge a battery with the adapter
`and a charger:
`(D Insert the battery.
`® Attach the adapter to the bottom of the come
`municator as shown in Figure 2~7. lnsert the
`curved pin into the right-hand side aperture
`at the end ofthe communicator. Push the left
`side of the adapter gently towards the com-
`municator until the left locking pin engages.
`(If you try to force the adapter into place up-
`side down, you may accidentally break offthe
`curved guiding pin.)
`
`
`
`Figure 2—7:Attoching the adapter
`
`(3 Connect the charger lead to the adapter, as
`shown in Figure 2—8.
`
`
`
`Figure 2-8: Charger lead
`
`GD Connect the charger to an 120 V AC wall out—
`let. If the phone interface is switched on, the
`CHARGING message appears on the display
`and segments of the battery indicator bar on
`the righthand side ofthe phone interface dis
`play will start scrolling. [Charging information
`is also shown on the communicator interface
`
`display, see "Indicators" on page 2—10.)
`(5) When the battery is fully charged, the battew
`indicator bar will stop scrolling and display
`five solid bars. You may remove the adapter
`from the communicator:
`6) Hold down the release button on the left side
`of the adapter (Figure 2—7). and turn the
`adapter away from the communicator.
`When the charge is low and only a few minutes
`ofoperation time remain, a warning tone will be
`heard, and the message BATTERY LOW will be re—
`peated at regular intervals on the display. When
`the charge level becomes too low for operation,
`the RECHARGE BATTERY message will be dis—
`played, accompanied by a warning tone. If you
`do not connect the communicator to a charger,
`the communicator automatically switches itself
`off. If the tones have been switched off, only the
`display messages will appear (see Chapter 13
`"Phone interface: Detailed menus list — All
`sounds (Menu 10)" on page 13-15).
`
`Page 8 of 72
`
`RIM v. MMI
`IPR2013-00036
`Exhibit 1030. p. 8
`
`RIM v. MMI
`IPR2013-00036
`Exhibit 1030, p. 8
`
`Page 8 of 72
`
`
`
`_
`
`2—6
`
`Note: No information or user data will be lost if
`the battery is removed or completely
`discharged. User data is automatically
`retained by the flash memory and is
`unaffected by the status of the battery.
`
`Using the battery
`Use only batteries approved by the communicator
`manufacturer. With approved chargers and acces-
`sories, the battery can be charged continuously.
`The battery need not be fully discharged before
`recharging. When a charger is not in use, discon—
`nect it from the power source.
`The battery can be charged and discharged hun-
`dreds of times. but it will eventually wear out.
`When the operation time [talk—time and stand—by
`time) is noticeably shorter than normal. it is time
`to buy a new battery.
`Temperature extremes will affect the ability of
`your battery to charge: it may require cooling or
`warming first.
`Factors affecting battery operation time:
`O Whether both interfaces are in use.
`
`O Radio signal strength.
`O Various phone settings.
`O Length of the communicator interface's
`screen power—down period (set in System
`application's settings, see Chapter 10
`"System: System settings" on page 10-1].
`
`Battery
`
`Chapter 2 — Getting started
`
`2—7
`
`Always keep a charged battery in the communica—
`tor. Keeping the battery charged maximizes the
`lifetime ofthe backup battew supplying power to
`the communicator's real-time clock. In the un—
`likely event that the backup battery is drained, it
`may be replaced by qualified personnel.
`Always close the device cover before removing
`the battery. Closing the cover automatically
`saves all data.
`
`Note:
`
`O Use the battery only for its intended purpose.
`O Never use any charger or battery which is
`damaged or worn out.
`O Do not short circuit the battery. Accidental
`short circuiting can occur when contact with
`a metal object (coin, paperclip or pen) causes
`direct connection ofthe + and — terminals of
`the battery. This could occur when you carry
`a spare battery in your pocket or purse. Short
`circuiting the terminals may damage the
`battery or the connecting object.
`O Leaving the battery in hot or cold places, such
`as in a closed car in summer or winter condi—
`tions, will reduce the capacity and battery
`lifetime. Try to keep the battery between
`+59°F [+15°C) and +77°F (+25°C). A hot or
`cold battery may temporarily not work, even
`when the battery is fully charged. Li-Ion
`batteries' performance is particularly limited
`in temperatures below +32“F (0°C).
`O Dispose of used batteries in accordance with
`local regulations. Recycle! Do not dispose of
`batteries in a fire!
`
`Communicator interface
`
`
`
`
`
`
`
`
`Figure 2-9: Communicator interface
`
`To activate the communicator interface press the
`cover lock catch and open the cover (Figure 2—9).
`The applications are run in the middle of the dis—
`play. The indicators [Figure 2—10) show applica—
`tion and system—related information (see
`"Indicators" on page 2—10).The commands always
`relate to the column offour command buttons on
`the right side of the display cover.
`
`Communicator display
`Display — The screen where applications are run.
`Indicators — Show application a nd system related
`information (see "Indicators" on page 2—10].
`Selection frame —The highlighted line within a
`menu area. You can select items by moving
`the selection frame with the scroll buttons to
`the left of the display or the up/down arrow
`
`keys on the keyboard [see "Keyboard" on
`page 2-11).
`Commands ~ The column of four command but-
`tons to the right ofthe display.
`Scroll buttons — To the left of the display. Use
`the scroll buttons to navigate up and down
`through the display text.
`Scroll bar — Indicates your relative position
`within the display text.
`Search field — At the bottom of the display text
`area. When the search field appears, you can
`search for items by entering text in the
`search field.
`
`Select the item you want, then press the appro—
`priate command button. For example, to view the
`contact information for an individual in the list of
`contacts. select the individual. then press Open.
`
`Page 9 of 72
`
`RIM v. MMI
`|PR2013-00036
`Exhibit 1030. D. 9
`
`RIM v. MMI
`IPR2013-00036
`Exhibit 1030, p. 9
`
`Page 9 of 72
`
`
`
`I
`8N
`
`Communicator interface
`
`Chapter 2 — Getting started
`
`2-9
`
`Indicators
`
`Selection frame
`
`Commands
`
`
`
`
`pg; Contacts director;|
`Ashford David
`Bailey William
`Bruce Naomi
`Callahan Jane
`Carr Tom
`Dillinger Sylvia
`
`ABC Design Co.
`TransCo Tech. :5
`Bruce Graphic Arts
`Product Research Ltd.
`ChemTech, |nc..
`Ambassador Travel
`
`Search field
`
`Scroll bar
`
`Figure 2— 10: Communicator display
`
`Open (:)
`
`
`
`New gr \)
`V
`a;
`Records [iv Q
`
`Menu (#3
`
`Command buttons
`
`Communicator applications
`
`The nine colored application buttons across the
`top of the communicator interface keyboard are
`used to start the corresponding applications [de—
`scribed in the following chapters of this manual).
`
`Tel. — Telephone is used for managing voice
`calls.
`
`Fax — Fax enables you to send any of your
`own documents as a fax. Received faxes can
`be read or forwarded.
`
`SMS ~ Short Message Service enables you to
`send short text messages. Received short mes—
`sages can be read, forwarded or replied to.
`
`Internet — Internet applications include Inter—
`net and modem-based applications: E—mail,
`World Wide Web, Telnet and Terminal (VTlOO
`compliant).
`
`Contacts — Contacts is used for managing
`your contact information: names, numbers
`and addresses. You can exchange contact
`information as business cards via the SMS
`application.
`
`Notes —- Notes is used for text editing, print—
`ing and document management. You can also
`send documents as short messages, faxes or
`e—mail from the Notes application.
`
`Calendar — Calendar contains an appoint—
`ment book and a to—do list. You can set
`alarms and attach memos to events.
`
`System — System contains desktop connec-
`tivity, security and other system—related
`applications.
`
`Extras — The Extras application group in—
`cludes Text Web, Calculator, Clock, Composer.
`Converter. and Wireless data backup.
`
`Using the applications
`When the cover is opened, the application which
`was active when you closed the cover appears in
`the state in which you left it. However, if you
`have made or answered a voice call via the
`phone interface and switch to the communica—
`tor interface by opening the device cover, the
`Telephone application activates automatically,
`see Chapter 4 "Telephone" on page 4—1.
`To switch to another application, press the cor—
`responding application button. You can do this
`even during an active call.
`
`Note:You need not "exit" any application before
`starting another. All inactive applications
`are run in the background until they are
`activated again. If the battery is removed
`or completely discharged, all data will be
`saved, and the applications will return to
`their default states.
`
`Information need not be specifically saved (there
`is no "Save" command). The Nokia 9000i Come
`municator saves all data automatically.
`To send or receive with any of the communica—
`tions applications, remember that the phone in—
`terface must be switched on and in a service
`area with adequate GSMlQOO network signal
`strength.
`
`Communicator interface conventions
`
`The following figures illustrate certain communi—
`cator interface conventions [Figure 2—11, 2—12).
`
`Description:
`l
`Reserve:
`Date.
`Start:
`Date:
`End:
`Alarm the NW2
`Frequency
`
`Daily Close.
`
`-
`-
`
`. . .
`
`.
`
`.
`
`.‘fima;
`-‘lirne:
`
`2.
`
`Memo
`Calendar
`honking
`
`Figure 2-11: Example ofcommands
`(1) When a command appears dimmed, the com—
`mand cannot be used.
`
`(2) When a value appears on a dotted line with a
`cursor, enter a new value manually via the
`keyboard.
`
`fl Spend dlals: Er slim 51m |m
`TeliHomel 57
`"BM
`.
`TollGSM)‘
`1 A\milhalln Illu‘m
`I
`
`3 rlallad Flinlf.4 5w! Min-
`5 Sturlwl L'filBlnmn'J
`i Ii 55': Support
`
`
`
`3
`
`'
`
`Figure 2- 12: Example of a pop-up box
`[3) When a pop—up box appears. choose an item
`and press OK or Cancel.
`
`When a setting with D next to it is selected,
`pressing Change toggles the value [e.g. on/off]
`or opens a pop-up box (Figure 2—12].
`When a setting with 2| next to it is selected,
`pressing Change opens a new settings view.
`When you press a command with I’ next