JAMES L. GLANCEY, PH.D., P.E.
`CU R R I C U L U M VI T A E (S I N C E P R O M OT I O N T O A S S OC I A T E P R OF E S SO R I N 1997)
`
`Glancey CV - 1
`Last Update: 27 May 2020
`
`1991
`1987
`1985
`
`9/18 - present
`7/16 – present
`9/15 - present
`7/03 - present
`7/03 - present
`9/03 – present
`
`REGISTERED PROFESSIONAL ENGINEER (MECHANICAL): DELAWARE REG. NO. 19743
`EDUCATION
`University of California, Davis
`Ph.D.
`(cid:120)
`University of California, Davis
`(cid:120) M.S.
`University of Delaware
`(cid:120) B.S.
`PROFESSIONAL EXPERIENCE
`Professor, Mechanical Engineering & the College of Agriculture and
`(cid:120)
`7/12 - present
`Natural Resources, University of Delaware
`9/97 – 6/12
`(cid:120) Associate Professor, Mechanical Engineering, University of Delaware
`7/97 – 6/12
`(cid:120) Associate Professor, Bioresources Engineering, University of Delaware
`1/91 - 6/97
`(cid:120) Assistant Professor, Bioresources Engineering, University of Delaware
`Principle and Owner, Mechanical Design and Forensic Analysis LLC, Middletown, DE 6/99 – present
`(cid:120)
`Partner, Structural Mechanics Associates, Haverford, PA
`7/12 – 6/19
`(cid:120)
`OTHER ACADEMIC APPOINTMENTS
`(cid:120) Academic Contact, Concentration in Manufacturing Systems, Dept. of Mech Engr.
`Faculty Coordinator, Student Machine Shop, College of Engineering
`(cid:120)
`Faculty Advisor, Alpha Gamma Rho, Univ. of Delaware Chapter
`(cid:120)
`(cid:120) Affiliate Faculty, Center for Composite Materials, Univ. of Delaware
`(cid:120) Engineer, Cooperative Extension Service, Univ. of Delaware
`Faculty Member, Center for Biomedical Engineering Research, Univ. of Delaware
`(cid:120)
`(now the Center for Biomechanical Engineering Research, Univ. of DE)
`RECOGNITION AND AWARDS
`(cid:120) The University of Delaware George M. Worrilow Award for Outstanding Alumni. 2017.
`(cid:120) The Delaware Farm Bureau Distinguished Service to Agriculture Award. 2014.
`(cid:120) The Water Resources Association of the Delaware River Basin’s 2011 Government Award - (co-recipient with
`Governor Jack Markell; Secretary of Environment and Energy Collin O’Mara; Secretary of Agriculture for the State
`of Delaware, Edwin Kee; Mayor of Middletown, Delaware, Kenneth Branner; and President of Artesian Water,
`Dian Taylor). 2011.
`(cid:120) The Delaware Vegetable Growers Association Distinguished Service Award. 2011.
`Selected as Associate Editor, Power and Machinery Division, The American Society of Agricultural and Biological
`(cid:120)
`Engineers, 2004-2012.
`(cid:120) Nominated for Excellence in Academic Advising, University of Delaware, 2006.
`Inducted into the University of Delaware’s Mentors’ Circle. 2001.
`(cid:120)
`(cid:120) Dean’s Merit Award, University of Delaware, 2001.
`(cid:120) Nominated for Excellence in Teaching Award, University of Delaware College of Engineering, 2000.
`(cid:120) North Central Campus Senior-Faculty Recognition Award, University of Delaware, 2000.
`(cid:120) Excellence in Academic Advising, University of Delaware. 1997.
`Society of Automotive Engineers Recognition Award. 1997, 2004 Off-Highway and Powerplant Exposition.
`(cid:120)
`(cid:120) Awards Received by Student Advisees:
`(cid:131) American Society of Mechanical Engineers (ASME), Delaware Section Student Design Award. 2019. Harper
`Drake, Mary Galanek, John Hughes, Jess Tentindo. $500.
`(cid:131) American Society of Mechanical Engineers (ASME), Delaware Section Student Design Award. 2013.
`Benjamin J. Hockman, Gerad M. Lieb, Gregory N. Ohnemus, Luke A. Walmer. $500.
`(cid:131) American Society of Mechanical Engineers (ASME), Delaware Section Student Design Award. 2013. Brett A.
`Davis, David L. A. Eisensmith, Laura E. Quinn, Stephen J. Schafer. $500
`(cid:131) The 2009 American Society of Mechanical Engineers (ASME) International Student Design Competition,
`Second Place Award Recipients (Raquel Ciappi, Brad Miller, Steve Petfield, Chris Uthgenannt). $1000.00.
`
`- 1 -
`
`IPR2019-01050
`PRECISION PLANTING v. DEERE
`EXHIBIT 1072
`
`

`

`Glancey CV - 2
`
`(cid:131) The 2008 ASME International Student Design Competition, Tied for First Place Award (Sean Collins, Sarah
`Mabel, Dan Shannon, and Doug Erikson). $2,500.
`(cid:131) The 2008 ASME International Student Design Competition, Tied for First Place Award (Jess Dibelka, Julianne
`Twomey, and Mark Steimer). $2,500.
`(cid:131) Sigma Xi (University of Delaware Chapter) Undergraduate Research Thesis Award (Janelle Konchar)
`(cid:131) Society for the Advancement of Materials and Processing (SAMPE) 2006 National Research Award (Michael
`Fuqua, 2nd Place), $1,000.
`(cid:131) Honors Degree with Distinction Thesis (Kerrie Smith, Richard Herseim, Scott Kasprzak, Michael Fuqua)
`(cid:131) Degree with Distinction Thesis (Janelle Konchar, Dan Brisach, Matt Griffith)
`(cid:131) Honors Program Undergraduate Research Summer Fellowship (Scott Kasprzak, Michael Fuqua)
`(cid:131) Hayward Fellowship for Undergraduate Research (Kerrie Smith, Richard Herseim, Scott Kasprzak)
`(cid:131) Nowinski Award for Undergraduate Research in Mechanical Engineering (Rich Herseim)
`(cid:131) Science and Engineering Scholars (Richard Herseim, Ian Cosden, Michael Fuqua, Janelle Konchar, Jessie
`Krisher, John Nasr, Mathew Griffith, Stephan Petfield, Connie Helstosky)
`(cid:131) Delaware Water Resources Center Summer Internship (Kerrie Smith, Mathew King)
`(cid:131) Undergraduate Research Supply & Expense Grants (Daniel Brisach (2), Matthew Griffith (3), John Nasr, Scott
`Kasprzak (2), Janelle Konchar (3), Jesse, Krisher, Mike Fuqua (2), Dan Muhlenforth, James Moore, Jennifer
`Lawrence, Dominic Schiavoni, Eric Busby, Richard Herseim (2), Gwen Thorsen (2), Dustin Fryberger, Kerrie
`Smith (2), Dawn Cintavey, Tony Nasr, Annie Tseng, Mike Fyock, Dan Meckley, Chad Stover, Dan
`Hoffstetter) ($5,000 total for all students).
`(cid:131) Colonial Academic Alliance Undergraduate Research Symposium Invited Presenter (Janelle Konchar, Kerrie
`Smith)
`(cid:131) Center for Biomedical Engineering Research Symposium Presenters (Justin Alms, Jennifer Lawrence, James
`Moore, Dominic Schiavoni, Dan Muhlenforth, Jonathan Fitzgibbons, Barbara Tuesday, Rich Herseim, Janelle
`Konchar, Jessie Krisher)
`(cid:131) Center for Composite Materials Undergraduate Research Fellowship (Michael Fuqua, Matt Griffith, Steven
`Petfield)
`(cid:131) Outstanding Senior Researcher, Center for Composite Materials (Scott Kasprzak, Daniel Brisach)
`(cid:131) Center for Composite Material Graduate Achievement Award (Justin Alms, co-advised w/ S. Advani)
`(cid:131) College of Engineering Graduate Student Laird Fellowship (Jingbo Wang, co-advised w/ J. Vinson)
`(cid:131) Center for Composite Materials R.L. McCullough Scholars Award (Justin Alms, co-advised with S. Advani)
`
`PROFESSIONAL SOCIETIES
`● Society of Automotive Engineers
`(cid:120) American Society of Mechanical Engineers
`● Delaware Association of Professional Engineers
`(cid:120) American Society of Agricultural & Biological Engineers
`(cid:120) Society for the Advancement of Material and Process Engineering ● American Society of Safety Professionals
`
`TEACHING
`COURSES TAUGHT AT UNIVERSITY OF DELAWARE
`Freshman Seminar (96F, 97F, 98F).
`(cid:120) EGTE 125/167
`(cid:120) EGTE/BREG 209 Computer-Aided Drafting (06S, 08S, 09S, 10S, 11S).
`Machinery Design (96F, 98S, 01S, 03S, 05S, 07S).
`(cid:120) EGTE 435
`(cid:120) EGTE 450
`Practicum in Industry (06S).
`(cid:120) EGTE 467
`Issues in Production Agriculture (02S).
`(cid:120) EGTE 366/466
`Undergraduate Independent Study (01F, 02S, 03F, 04S, 06F, 07W, 07S).
`(cid:120) AGEG 666
`Graduate Independent Study (97S).
`(cid:120) BREG 666
`Graduate Independent Study (08F, 10S).
`(cid:120) MEEG 202
`Computer-Aided-Engineering Design (05S, 11S, 12S).
`(cid:120) MEEG 301
`Machine Design: Kinematics (11F - 19F).
`(cid:120) MEEG 304
`Machine Design: Elements (99S, 00S, 12S-20S).
`(cid:120) MEEG 401
`Senior Design (99F/S, 00F-05F, 07F-19F).
`(cid:120) MEEG 445
`Senior Research (00-06).
`(cid:120) MEEG 366/466
`Independent Study (06-19S).
`(cid:120) MEEG 467
`Special Topics in Engineering Design (03S, 04S).
`
`- 2 -
`
`

`

`(cid:120) MEEG 666
`(cid:120) MEEG 866
`(cid:120) UNIV 111
`(cid:120) UNIV 401/402
`(cid:120) UNIV 401/402
`
`Graduate Independent Study (08S, 09F, 19S).
`Graduate Research (02F, 03S, 03F, 04S).
`First Year Experience Freshman Seminar (08F).
`Senior Thesis, University-Wide Instructor of Record (07F, 08S).
`Senior Thesis Advisor (02F, 03S, 03F, 04S, 04F, 05S, 05F, 06S, 06F, 07S).
`
`Glancey CV - 3
`
`
`
`INVITED LECTURES
`(cid:120) MEEG 653/463, Manufacturing Processes. Two Lectures: Computer-Aided Engineering and Manufacturing &
`Automation for Manufacturing. (2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2013, 2014, 2015, 2016,
`2017, 2018, 2019).
`(cid:120) MEEG 304, Machine Design. Developing Design Packages for Communicating Engineering Solutions. (2008).
`(cid:120) EGTE 440, Plant Layout. Basics of Vibration and Noise-Related Industrial Hygiene and Engineering Controls to
`Reduce Exposures and Injuries. (2007).
`(cid:120) UNIV 401, Senior Thesis. Developing an Effective Research Presentation: Fall Meeting of the Senior Thesis
`Candidates. (2004, 2005, 2006).
`(cid:120) UNIV 401, Senior Thesis. Using and Not Abusing Technologies to Deliver Research Presentations (a.k.a.
`Avoiding Death by PowerPoint). (2005, 2006).
`(cid:120) PLSC 302, Vegetable Science. Precision Ag for Horticultural Crops. (2000).
`(cid:120) ANFS 421, Poultry Production. Pollution Prevention Technologies for the Delmarva Poultry Industry. (1999).
`(cid:120) PLSC 302, Vegetable Science. Mechanization & Engineering in Production Horticulture & Introduction to GPS
`Technologies. (1999, 2010).
`(cid:120) EGTE 443, Instrumentation. Basics of GPS and DGPS. (1998).
`
`
`GRADUATE AND UNDERGRADUATE THESIS
`(cid:120)
`Ph. D. Students:
`(cid:131) First Advisor:
`o Justin Alms, Ph.D. in Mechanical Engineering (with Dr. Suresh Advani, 2006-2010).
`Thesis: Closed Loop Control Strategies with VARTM for Manufacturing Large-Scale Composites.
`(cid:131) Committee Member:
`o Hao Liu, Ph.D. in Mechanical Engineering (2018)
`o Thomas Cender, Ph.D. in Mechanical Engineering (2017)
`o Hatice Sas, Ph.D. in Mechanical Engineering (2015)
`o Hao Lu, Ph.D. in Mechanical Engineering (2014)
`o John Gandolf, Ph.D. in Mechanical Engineering (2014)
`o Parag Nittur, Ph.D. in Mechanical Engineering (2013).
`o Thomas Cender, Ph.D. in Mechanical Engineering (2013).
`o Hatice Sas, Ph.D. in Mechanical Engineering (2013).
`o Liang Chen, Ph.D. in Mechanical Engineering (2010).
`o Swapnil Garge, Ph.D. in Chemical Engineering (2007).
`o Kalyan Mankala, Ph.D. in Mechanical Engineering (2006).
`o Jeff Lawrence, Ph.D. in Mechanical Engineering (2005).
`o Jie Sheng, Ph.D. in Mechanical Engineering (2005).
`o Chris Foster, Ph.D. in Mechanical Engineering (2005).
`o Xiangyu Wang, Ph.D. in Mechanical Engineering (2004).
`o Luis Crespo, Ph.D. in Mechanical Engineering (2002).
`
`
`(cid:120) M.S. Students:
`(cid:131) First Advisor:
`o Ajit R Nalla, Master in Mechanical Engineering (2006).
`Thesis: Modeling and Adaptive Control of Vacuum Assisted Resin Transfer Molding Systems with
`Segmented Injection and Vacuum Lines.
`o Jingbo Wang, Master in Mechanical Engineering (with J. Vinson, 2002),
`Thesis: Transverse Shear and Non-Linear Deformation Effects on the Physical Properties of Sandwich
`and Laminate Composite Plates.
`
`- 3 -
`
`

`

`Glancey CV - 4
`
`
`o Manu Krishnan, Master in Mechanical Engineering (with J. Sun, 2000).
`Thesis: Adaptive Control Strategies for Precision Agriculture Machines.
`
`(cid:131) Committee Member:
`
`o Jeff Lugo Master of Mechanical Engineering. (2013).
`o Joe Walther, Master of Mechanical Engineering. (2011).
`o Kenneth Okonkwo, Master of Mechanical Engineering. (2010).
`o Piyush Bubna, Master of Mechanical Engineering (2010).
`o Justin Merotte, Master of Mechanical Engineering (2009).
`o Darren Brown, Master of Mechanical Engineering (2008).
`o Prabhas Bhat, Master of Mechanical Engineering (2007).
`o John Fader, Master of Mechanical Engineering (2006).
`o Thomas Shipman, Master of Mechanical Engineering (2006).
`o Stephanie Frangakis, Master of Mechanical Engineering (2005).
`o Sean McIntosh, Master of Mechanical Engineering (2005).
`o Yeliz Karakaya, Master of Mechanical Engineering (2005).
`o Scott Lynch, Master of Environmental and Energy Policy (2004).
`o James Arters, Master of Mechanical Engineering (2004).
`o Rajkiran Madangopal, Master of Mechanical Engineering (2004).
`o Mathieu Devillard, Master of Mechanical Engineering (2003).
`o Mark Lynch, Master in Food & Resource Economics (1998).
`
`
`
`
`
`(cid:120) Undergraduate Degree with Distinction and Honors Degree with Distinction Thesis
`(cid:131) First Advisor:
`
`o Daniel Brisach, Degree with Distinction in Mechanical Engineering (2006-07).
`Thesis: Vibration Transmission Measurements in the Hand and Arm from Impacting Components.
`o Matt Griffith, Degree with Distinction in Mechanical Engineering (2006-07).
`Thesis: High Strain Rate Characteristics of Mineral Reinforced Polymers.
`o Janelle Konchar, Degree with Distinction in Mechanical Engineering (2005-06).
`Thesis: Modeling & Testing of a New Polymer-Based Impact Tool Design to Reduce Biomechanical
`Injuries.
`o Michael Fuqua, Honors Degree with Distinction in Mechanical Engineering (2005-06).
`Thesis: A Port Injection System and Controller for VARTM.
`o Scott Kasprzak, Honors Degree with Distinction in Mechanical Engineering (2004-05).
`Thesis: VARTM Flow Modification with Machine Vision and Robotic Control.
`o Richard Herseim, Honors Degree with Distinction in Mechanical Engineering (2003-04).
`Thesis: A Full Scale Apparatus for Measuring the Forces Exerted on the Human Femur During Falls.
`o Kerrie Smith, Honors Degree with Distinction in Mechanical Engineering (2002-03).
`Thesis: An Autonomous Whole Water Column Environmental Monitoring System with Telemetry.
`
`(cid:131) Second Advisor:
`
`o Rossiny Beaucejour
`o John Eisenbrey
`o Michael Kutzer
`o Thomas Shipman
`o Kristin Huesmann
`o Karin Wood
`
`o Ryan Jost
`
`
`(cid:131) Third Reader:
`o Yuk-J Leung
`
`o Jennifer Bruhns
`o Casey Casalnuovo
`o Vikramjit Rathee
`
`2013-14
`(Mechanical Engineering)
`2004-05
`(Mechanical Engineering)
`2004-05
`(Mechanical Engineering)
`2003-04
`(Mechanical Engineering)
`2002-03
`(Mechanical Engineering)
`2002-03
`(Bioresources Engineering)
`(Food & Resource Economics) 2000-01
`
`(Mathematical Sciences)
`(Computer & Info. Science)
`(Computer & Info. Science)
`(Biological Sciences)
`
`- 4 -
`
`2012-13
`2012-13
`2012-13
`2012-13
`
`
`
`
`
`
`
`
`

`

`Glancey CV - 5
`
`
`2012-13
`2012-13
`2012-13
`2011-12
`2011-12
`2011-12
`2011-12
`2010-11
`2010-11
`2010-11
`2010-11
`2010-11
`2009-10
`2009-10
`2008-09
`2008-09
`2008-09
`2008-09
`2008-09
`2008-09
`2007-08
`2007-08
`2007-08
`2007-08
`2007-08
`2007-08
`2006-07
`2006-07
`2006-07
`2006
`2005-06
`2005-06
`2005-06
`2005-06
`2005-06
`2005-06
`2004-05
`2004-05
`2004-05
`2004-05
`2004-05
`2003-04
`2003-04
`
`o Matthew Saponaro
`o Ricky Shum
`
`o Matthew Stagitis
`o Rebecca Aiken
`o Michelle Allen
`o Cory Bart
`
`o Nicholas Troup
`o Stephanie Countess
`o Kent Davidson
`o Craig Davis
`
`o Geoffrey Dilg
`o Christine Sutkowski
`o Nathan Mayercsik
`o Melissa Stewart
`o Jeffrey Bosco
`
`o Michael Daugherty
`o Emily Gardinier
`o Katherine Monahan
`o Jeff Rockwell
`o Jason Schoenfeld
`o Adam Blomberg
`o Zachary Fry
`
`o Andrew Gearhart
`o Hailey Guerriero
`o Joshua Kirby
`o Donald Andre Scott
`o Steven Anton
`
`o Todd Molnar
`
`o Daniel Osborne
`o Ming-Jay Shiao
`o Patrick Collar
`
`o Janine Janoski
`o Kathryne Sharp
`o Zachary Loman
`o Peter Steijn
`
`o Ming-Jay Shiao
`o Anteneh Anteneh
`o Michael Brennan
`o Lewis Fishgold
`o Ki-Yong Kim
`
`o Brendan Farmer
`o Michael Lowinger
`o Richard Lunt
`
`
`(Mathematical Sciences)
`(Mathematical Sciences)
`(Computer & Info. Science)
`(Civil Engineering)
`
`(Computer Science)
`
`(Computer Science)
`
`(Physics & Astronomy)
`(Civil Engineering)
`
`(Civil Engineering)
`
`(Civil Engineering)
`
`(Civil Engineering)
`
`(Civil Engineering)
`
`(Civil Engineering)
`
`(Civil Engineering)
`
`(Chemical Engineering)
`(Health & Exercise Science)
`(Physical Therapy)
`
`(Health & Exercise Science)
`(Civil Engineering)
`
`(Health & Exercise Science)
`(Physics & Astronomy)
`(Computer & Info. Science)
` (Computer & Info. Science)
`(Physics & Astronomy)
`(Computer & Info. Science)
`(Computer & Info. Science)
`(Physics & Astronomy)
`(Mathematical Sciences)
`(Physics & Astronomy)
`(Electrical Engineering)
`(Computer & Info. Science)
`(Mathematical Sciences)
`(Mathematical Sciences)
`(Electrical Engineering)
`(Computer & Info. Science)
`(Electrical Engineering)
`(Computer & Info. Science)
`(Computer & Info. Science)
`(Computer & Info. Science)
`(Computer & Info. Science)
`(Mathematical Sciences)
`(Chemical Engineering)
`(Chemical Engineering)
`
`
`VISITING SCHOLARS AND STUDENTS
`(cid:120) Guillaume Lecore. 4th Year Plastics & Composites Process Engineering, Ecole des Mines de Douai, Douai,
`France. Automation of the VIPR process for composite manufacturing. (co-advised w/Dr. Suresh Advani). 2009.
`(cid:120) Laurent Garnier, 4th Year Mechanical Engineering, Ecole des Mines de Douai, Douai, France. Evaluation of
`VARTM control strategies to improve resin filling characteristics. (co-advised w/Dr. Suresh Advani). 2008.
`(cid:120) Aude Catry, 4th Year Mechanical Engineering, Ecole des Mines de Douai, Douai, France. Evaluation of VARTM
`control strategies to improve resin filling characteristics. (co-advised w/Dr. Suresh Advani). 2008.
`(cid:120) Benoit Lelievre. M.S., Department of Mechanical Engineering, Universite de Bretagne Sud, Lorient, France.
`Measurement and Control of the Resin Flow in Composite Pre-forms with Flow Disturbances and Variable
`Permeability. 2003.
`(cid:120) Yuen-Yong Leong, M.S., Electrical Engineering, Imperial College London, South Kensington campus, London,
`England. System Identification and Controller Design for a Hydrostatic Drive New Holland Windrower. 2002.
`- 5 -
`
`

`

`Glancey CV - 6
`
`
`(cid:120) Dr. Zhang Zong, Ph. D. Associate Professor, Department of Mechanical Engineering, Beijing University of
`Technology, Beijing, China. Modeling and Experimental Evaluation of the Wear in a Miniature Vane Pump Used
`for the Evaluation of Hydraulic Fluid Performance. 1999-2001 (w/ Dr. Michael Keefe).
`
`SPECIAL EDUCATIONAL PROGRAMS AND ACTIVITIES
`(cid:120) Solar Decathlon Competition. (2000-2001). Nationwide design competition to develop and operate an 800 ft2
`solar powered house – the team consisted of three faculty advisors, 30 students, 40 industrial sponsors, and
`several technical consultants. The University of Delaware house, along with the 9 other houses from universities
`in the U.S. and Puerto Rico, was built and operated on the National Mall in Washington, D.C. for a 10-day period
`in October, 2002. Over 90,000 visitors toured the site, and the U of D house placed sixth in the competition.
`Faculty Advisors: Drs. Lian Ping Wang, Ajay Prasad, and James Glancey.
`(cid:120) Travel Abroad Program to California/Mexico. Winter Session 2002. Co-Sponsored by the Departments. of Plant
`and Soil Sciences & Bioresources Engineering. Faculty Directors: Ed Kee and James Glancey. Cancelled due
`to terrorist activities of September 11, 2001.
`(cid:120) Charter High School Senior Research Project Advisor
`(cid:131) Derrek Jones. 2004-05. Performance of a non-contact temperature sensor for avian egg embryo temperature
`measurement. Senior Research Project for the Charter School of Wilmington.
`(cid:131) Phillip Franklin. 2004-05. Biomechanics of a human climbing a fiberglass step ladder. Senior Research
`Project for the Charter School of Wilmington.
`(cid:120) Summer Research Internship
`(cid:131) Kurt Hayes. 2011. Comparison of flashspun high-density polyethylene fibers to other conventional polymer
`fabrics for the separation of oil from water. Rowen University, Glassboro, DE.
`(cid:131) Erin McCaul. 2005. Estimating physical properties required for computing the forces on the upper femur
`during falls. St. Marks High School, Wilmington, DE.
`(cid:120) High School Sophomore Science Fair Project Advisor
`(cid:131) Samir Streatfield. 2011-12. Design of a grinder to accelerate composting of food wastes. Unionville High
`School. Delaware Valley Science Fair, Unionville, PA.
`(cid:131) Amee Raval. 2006-07. Measuring the Heating Value from Several Different Bio-Diesel and E-Diesel Fuels.
`Sophomore Science Fair for the Charter School of Wilmington, Wilmington, DE.
`(cid:131) Sam Nobles, 2005-06. Testing of Ethanol-Based and Soy Oil-Based Diesel Fuels in Commercial and
`Industrial Engines. Sophomore Science Fair for the Charter School of Wilmington.
`(cid:131) Shane Furn. 2005-06. Particulate Emission Measurements from Several Biofuels in Commercial and
`Industrial Engines. S
`(cid:131) Sophomore Science Fair for the Charter School of Wilmington.
`(cid:131) Coach for the Science Olympiad. Lectures and Demonstrations on Simple Machines. Mario Musumeci and
`Adam Smith. (2008).
`(cid:120) New Castle County Annual Science Fair Judge and American Society of Mechanical Engineers Award Presenter.
`(2006, 2008, 2009, 2010). Stanton, DE.
`(cid:120) Presentations and Career Fairs for High School Student Groups:
`(cid:131) Engineering as a Profession. 2012. Middletown High School, Middletown, DE.
`(cid:131) What’s a Professional Engineer? 2008, 2009. Middletown and Appoquinimink High Schools Career Fair.
`(cid:131) Engineering as a Profession. 2007. St. Marks High School Career Fair, Wilmington, DE.
`(cid:131) Biomechanics: Engineering for (and of) Humans. 2004. Outreach seminar for the Resources for Successful
`Engineers (RISE) program, Students from the Philadelphia School District, Newark , DE.
`(cid:131) Who’s Really Protecting Me? Engineers Who Design and Develop Products! 2003. Outreach seminar for
`the Resources for Successful Engineers (RISE) program, Students from the Philadelphia School District,
`Newark, DE.
`
`
`UNDERGRADUATE STUDENT PROJECTS ADVISED FOR CREDIT (INDEPENDENT STUDY OR HONORS
`DEGREE REQUIREMENT), 3 CREDITS UNLESS OTHERWISE NOTED
`1. Anuj Gandhi. 2019. Scaling of a silica column manufacturing process for gas chromatographs. Sponsored by
`Advanced Materials Technology, Wilmington, DE. (Graduate Student)
`2. Greg Driscoll and Drew McQuiston. 2019. Integration of a cooperative robot into the assembly process for
`silica-based reactive columns in liquid chromatographs. Newport Manufacturing Site, Agilent Technologies,
`Wilmington, Delaware.
`
`- 6 -
`
`

`

`Glancey CV - 7
`
`
`3. Mary Galanek. 2018. Fatigue analysis of a four bar linkage. Sponsored by Siemen Healthcare Diagnostics.
`(Honors Degree Requirement).
`4. Michael Palmer. 2018. Testing of an angled gear worm drive for medical display devices. Sponsored by Southco
`Inc., Concordville, PA. (Honors Degree Requirement).
`5. Greg Driscoll. 2018. Stepper motor sizing as an alternative drive for a cooperative robot tube feeding system.
`Sponsored by Newport Manufacturing Site, Agilent Technologies. (Honors Degree Requirement).
`6. Drew McQuiston. 2018. Staticially significant testing of a tube singulation mechanism. Sponsored by Newport
`Manufacturing Site, Agilent Technologies. (Honors Degree Requirement).
`7. Kanak Chattopadhyay. 2018. Evaluation of an automated bottle cap torqueing system for the filling line of
`consumables reagent bottles. Sponsored by Siemens Healthineers, Glasgow, DE.
`8. Matt Blasi, Tom Celenza, Matt Seitel, Alex Nugent. 2018. Implementation of a cooperative robot for Computer
`Numerical Control fabrication of Plexiglas shields. Sponsors by Norwalt Design.
`9. Luke Szewczak. 2018. Software and laboratory assignment development for the 3-axis Mazak milling machine
`in Spencer Lab. Sponsored by the Department of Mechanical Engineering (6 credits)
`10. Matt Hall, Sarah Ago, and Ricky Hahn. 2018. Redesign of a 3d adjustment system for an optical HASMAT
`chemical detector. Sponsored by Smith Detection, Edgewood, Maryland.
`11. Marisa Bisram. 2017. Modeling the enclosure environment on a 3-axis mill using coolant mist. Sponsored by
`Depuy Synthes. (Honors Degree Requirement).
`12. Shannon Russell. 2017. Semi-automated extrusion loader for reagent vessels. Sponsored by Siemens Healthcare
`Diagnostics.
`13. Connor Bydlon. 2016. Hopper transfer process for extruded plastic cuvette holders. Sponsored by Siemens
`Healthcare Diagnostics. (Honors Degree Requirement).
`14. Steven Davis and Adam Smith. 2016. Test system for qualifying silicon lids on reagent delivery trays.
`Sponsored by Siemens Healthcare Diagnostics.
`15. Michael Junken. 2015. Optimized design for the next generation plate lifting system for composite sample
`manufacturing. Sponsored by GE Aviation.
`16. Steve Todderud. 2015. Developing of a tailgate-based bale weighing system for large round balers. Sponsored
`by Case-New Holland Industrial, New Holland, PA.
`17. Hunter Bachman. 2015. Preventative maintenance statistical analysis for a tube manufacturing process.
`Sponsored by Superior Tube. Collegeville, PA (Honors Degree Requirement).
`18. Rebecca Runkle. 2014. Automation of composite preforms into an autoclave for curing. Sponsored by GE
`Aviation, Newark, DE. (Honors Degree Requirement).
`19. Michael McClintock. 2014. Integration of load measurement pins into the rear door of a round baler. (Honors
`Degree Requirement).
`20. Derrick Herr. 2013. Modeling and testing of a robotically inserted surgical needle. Sponsored by Dr. Peter
`Popper.
`21. Adrian Sawyer. 2013. Automation of honeycomb structure curing during manufacturing. Sponsored by Alcore,
`Edgewood, MD. (Honors Degree Requirement).
`22. David Chun and Devon Prate. 2012. Development of a manufacturing process for composite honeycomb
`structures for aerospace applications. Sponsored by Alcore, Edgewood, MD.
`23. David Eisensmith. 2012. Improved welding method for precision wound temperature sensors for aircraft
`applications. Sponsored by Sensing Devices, Inc.
`24. Chanel Aldrich. 2012. Modeling and testing for a composite cap for impact tools. Sponsored by Hard Cap, LLC.
`25. Michael Yeager. 2011. Forming process for composite plate manufacturing. Sponsored by the The Dupont Co.
`(Honors Degree Requirement).
`26. Eric Wurtzel. 2011. Laminated aluminum expandable structures. Sponsored by Alcore, Edgewood, MD.
`(Honors Degree Requirement).
`27. Daniel Russach. 2010. Failure modes analysis of a blood analysis machine using FMEA and Fault Tree
`techniques. Sponsored by Siemens Healthcare Diagnostics.
`28. John Zerhusen. 2010. Implementation and validation of a non-contact torque test for a blood pump assembly
`process. Sponsored by Terumo Cardiovascular.
`29. Connie Helstosky. 2010. Photovoltaic system sizing for a solar powered facility for the University of Delaware
`Creamery.
`30. Kristen Saksa. 2010. Computer-Aided drafting methods for the University of Delaware Botanical Gardens. (1
`credit).
`
`- 7 -
`
`

`

`Glancey CV - 8
`
`
`31. Jennifer Iskai. 2009. Design of an automatic adhesive application process to attach an acrylic impeller to a pump
`motor shaft for the artificial heart-lung oxygenator. Sponsored by Terumo Cardiovascular.
`32. Christopher Uthgenannt. 2009. Measurement of airflow characteristics of various disc mower design
`configurations. Sponsored by Case-New Holland. (6 credits)
`33. Ronit Lilu. 2008. Implementation plan for lean manufacturing of an artificial heart-lung oxygenator.
`Sponsored by Terumo Cardiovascular.
`34. Kasey Gust. 2008. Integration of an automated pressure regulator setting system for oxygen bottle
`manufacturing. Sponsored by Siemens Corp.
`35. Daniel Brisach. 2008-09. Development of PWM charging strategies for ultracapacitors used on mobile
`equipment for energy storage. Sponsored by Case New Holland.
`36. Mark Steimer. 2008. Control circuit simulation and prototyping of vehicle energy storage systems using
`ultracapacitors. Sponsored by Case New Holland
`37. Michael Brill. 2008. Design and prototyping of a novel sanitary fly swatter (US Patent No. 6,957,510).
`Sponsored by Laura Simon, Esquire, Wilmington, DE.
`38. Sean Collins and Doug Ericson. 2008. Modeling and experimental validation of an on-board hydraulic bale
`weighing system for round balers. Sponsored by Case New Holland. (3 credits for each student)
`39. Dan Pron. 2007. Confined compression characteristics of a mineral reinforced polymer. Sponsored by Hard
`Cap, LLC.
`40. Daniel Gempeshaw. 2007. Kinematic analysis of a composite marine seat structure for military applications.
`Sponsored by Revenge Composites (in fulfillment of his Honors Capstone Requirement).
`41. Tom Coombes. 2007. Design and development of a hand-crank dynamometer as a hands-on museum activity.
`Sponsored by the Delaware Ag Museum. (4 credits)
`42. Dan Pron. 2006-07. Testing of polymers for impact durability on a hammer face. Sponsored by Hard Cap, LLC.
`43. Jesse Krisher. 2006. Development of an ALGOR finite element model for the prediction of femoral fractures
`from human falls. Sponsored by the DuPont Co.
`44. Beth Miller, Erik Pearson, and James Woodhouse. 2006. Embedded controller development and vehicle testing
`of a drive-by-wire propulsion system for a windrower. 2006. Sponsored by CNH America, LLC. (3 credits each)
`45. Matt Griffith. 2006. High strain rate testing of reinforced polymer inserts for power tools using a Split Hopkins
`Bar. Sponsored by Hard Cap, LLC.
`46. John Armstrong and Greg Stewart. 2005. Design and testing of a mechanical harvesting system for indoor,
`closed system tilapia production. Sponsored by Blair View Aquaculture Farm. (3 credits each).
`47. Julia Levinson. 2005. Automated measurement of laminate bond strength for substrates bonded to Teflon
`membranes. Sponsored by W.L. Gore and Associates.
`48. Craig Livingston. 2005. Computer-aided-drafting fundamentals (1 credit).
`49. Barry Levinson. 2005. Solid modeling with mechanical desktop (1 credit).
`50. Mark Deaver. 2004-05. Parametric modeling and finite element analysis of disposable testing components for
`measuring laminate bond strength. Sponsored by W.L. Gore and Associates.
`51. Gwen Thorsen. 2003-04. Software development and testing for the automatic transmission of data via a cellular
`modem. Sponsored by the Delaware Department of Natural Resources and Environmental Control. (6 credits)
`52. Eric Busby. 2004. Development of a remote controlled drip tape cutter for drip tape laying equipment. Sponsored
`by Busby Farms.
`53. Jennifer Lawrence and James Moore. 2004. Development of a test stand for the vibration analysis of power
`tools. Sponsored by Baltimore Tool Works, Inc. (3 credits each)
`54. Dominic Schiavoni. 2004. Design of a drop tower for constant energy impact testing. Sponsored by Baltimore
`Tool Works, Inc.
`55. Dan Muhlenforth. 2004. Design and testing of low vibration accessories for hand-struck tools. Sponsored by
`Baltimore Tool Works, Inc.
`56. Derrick Dickerson. 2004. Development of an automated test device for evaluating the wear characteristics of
`poultry nipple drinkers. Sponsored by the Delaware Cooperative Extension Service. (co-advised w/ Gary Van
`Wicklen).
`57. Eric Busby. 2004. Development and testing of a device for accelerated life testing of an Air Pogo toy. Sponsored
`by Leavis and Rests, P.C.
`58. Dan Muhlenforth. 2003-04. Software and sensor arrangement for determining the frequency content of hand-
`mounted accelerometers. Sponsored by Baltimore Tool Works, Inc.
`59. Dominic Schiavoni. 2003-04. Measurement of vibration transmitted to the hand from hand-struck and power
`tools. Sponsored by Baltimore Tool Works, Inc.
`
`- 8 -
`
`

`

`Glancey CV - 9
`
`
`60. Dominic Pellegrenio. 2003. Design of a steel frame flooring system with EPS foam insulation. Sponsored by
`Ecothermal Panel Systems, Inc.
`61. Mike Fyock and Dan Meckley. 2003. Structural analysis and hydraulic automation of a prototype kicker for
`round balers. Sponsored by Case New Holland, Inc. (3 credits each)
`62. Annie Tseng. 2003. An automated testing machine and methodology for ceramic wafer substrates used for blood
`sample analysis. Sponsored by Dade Behring.
`63. Matt Mitch. 2002. Development of a computer design tool for the cooling systems on skid-loaders. Sponsored
`by Case-New Holland, Inc