throbber

`
`www.archive.org
`415.561.6767
`
`415.840-0391 e-fax
`
`Internet Archive
`300 Funston Avenue
`
`San Francisco, CA 94118
`
`AFFIDAVIT OF CHRISTOPHER BUTLER
`
`1. | am the Office Managerat the Internet Archive, located in San Francisco,
`California. I make this declaration of my own personal knowledge.
`2. The Internet Archiveis a website that provides accessto a digital library of
`Internetsites and othercultural artifacts in digital form. Like a paperlibrary, we provide
`free accessto researchers,historians, scholars, and the general public. The Internet
`Archive has partnered with and receives support from variousinstitutions, including the
`Library of Congress.
`3. The Internet Archive has created a service known as the Wayback Machine. The
`Wayback Machine makesit possible to surf more than 450 billion pages stored in the
`Internet Archive's web archive. Visitors to the Wayback Machinecansearch archives
`by URL(i.e., a website address). If archived records for a URL are available, the visitor
`will be presented with a list of available dates. The visitor may select one of those
`dates, and then begin surfing on an archived version of the Web. Thelinks on the
`archived files, when served by the Wayback Machine,point to other archivedfiles
`(whether HTML pagesor images).If a visitor clicks on a link on an archived page, the
`Wayback Machinewill serve the archived file with the closest available date to the page
`upon whichthe link appeared and wasclicked.
`4. The archived data made viewable and browseable by the Wayback Machineis
`compiled using software programs knownas crawlers, which surf the Web and
`automatically store copies of web files, preserving thesefiles as they exist at the point of
`time of capture.
`5. The Internet Archive assigns a URL onits site to the archivedfiles in the format
`http://web.archive.org/web/[Year in yyyy][Month in mm][Day in dd][Time code in
`hh:mm:ss]/[Archived URL]. Thus, the Internet Archive URL
`http://web.archive.org/web/19970126045828/http://www.archive.org/ would be the
`URLforthe record of the Internet Archive home page HTML file
`(http://www. archive.org/) archived on January 26, 1997 at 4:58 a.m. and 28 seconds
`(1997/01/26 at 04:58:28). A web browser maybeset such that a printout from it will
`display the URL of a webpagein the printout’s footer. The date assigned by the Internet
`Archive applies to the HTML file but not to imagefiles linked therein. Thus imagesthat
`appear on a page maynot havebeen archived on the same date as the HTML file.
`Likewise, if a website is designed with "frames," the date assigned bythe Internet
`Archive applies to the frameset as a whole, and not the individual pages within each
`frame.
`6. Attached hereto as Exhibit A are true and accurate copiesof printouts of the
`Internet Archive's records of the HTML files or PDF files for the URL andthe dates
`specified in the footer of the printout (HTML) orattached coversheet (PDF).
`7. I declare under penalty of perjury that the foregoingis true andcorrect.
`
`
`
`DATE: [[32/ (t Ce<2|
`
`Christopher Butler
`
`Page | of 11
`
`SAMSUNG EXHIBIT 1008
`
`
`
`
`SAMSUNG EXHIBIT 1008
`
`Page 1 of 11
`
`

`

`CALIFORNIA JURATenaeeeee
`
`See Attached Document.
`
`A notary public or other officer completing this
`certificate verifies only the identity of the
`individual who signed the documentto whichthis
`certificate is attached, and notthe truthfulness,
`
`accuracy, or validity of that document.
`
`Subscribed and sworn to (or affirmed) before me on
`this
`
`State of California
`County of San Francisco
`
`Cy eroce
`
` See LAUREL KARR
`
`
`5 a5)
`Commission # 2172222
`2
`j —_
`My Comm. Expires Nov 17. 20208
`
`
`
`Page 2 of 11
`
`th
`
`30 day of
`Christopher Butler,
`
`oben
`
`7 dol . by
`
`>
`
`aaa
`
`proved to me onthebasis ofsatisfactory evidence to be
`the person who appeared before me.
`
`erae f Vl ie
`
`Page 2 of 11
`
`

`

`
`Exhibit A
`
`Exhibit A
`
`Page 3 of 11
`
`Page 3 of 11
`
`

`

`SunSPOTWorld - Project Sun SPOT Documentation
`
`1 of 1
`
`Project Sun SPOT > >
`
` Documentation
`
`Documentation
`
`Media
`
`Resources
`
`Frequently Asked Questions:
`
`General FAQ
`
`html General questions about Sun SPOTs: what are they, how do I order them, what hardware/software do
`they use, etc.
`
`Troubleshooting FAQ
`
`html Help troubleshooting problems with your Sun SPOT.
`
`Release-Specific Documentation:
`
`v1.0
`(Green)
`
`v2.0
`(Orange)
`
`Sun Spot Library APIs (javadoc)
`
`html
`
`html
`
`Sun Spot User's Guide
`
`Sun Spot Release Notes
`
`Sun Spot Developer's Guide
`
`Sun Spot Theory of Operation
`
`pdf
`
`pdf
`
`pdf
`
`pdf
`
`pdf
`
`pdf
`
`pdf
`
`Tutorial
`
`html
`
`html
`
`Application Notes:
`
`Using the LIS3L02AQ
`Accelerometer
`
`pdf The Sun SPOT demo sensor board includes an LIS3L02AQ accelerometer that can be used to
`measure the orientation or motion of the SPOT. This application note describes how to use and
`calibrate the LIS3L02AQ accelerometer.
`
`Using the AT91
`Timer/Counter
`
`pdf The Sun SPOT processor board includes two AT91 Timer Counters that can be used in a variety of
`ways. This application note describes both how to use the AT91 Timer Counter to measure elapsed
`time and to perform a periodic task.
`
`Remote Control
`Camera
`
`pdf How to attach Servo Motors to a Sun SPOT to create a remote-controlled pan-and-tilt Web Camera
`including BaseStation webserver for web-based control.
`
`Contact Us | Copyright 2007 Sun Microsystems, Inc. All rights reserved. | Privacy | Terms of Use | Trademarks
`
`http://web.archive.org/ web/20071005194810/http://www.sunspotworld.com:80/docs/
`
`Page 4 of 11
`
`

`

`https://web.archive.org/web/20070720102052/http://sunspotworld.com/docs/A
`ppNotes/AccelerometerAppNote.pdf
`
`Page 5 of 11
`
`

`

` A SUN SPOT APPLICATION NOTE
`
`Using the LIS3L02AQ Accelerometer
`Ron Goldman
`
`>
`
`The Sun SPOT demo sensor board includes an LIS3L02AQ accelerometer that can be used to measure
`the orientation or motion of the SPOT. This application note describes how to use and calibrate the
`LIS3L02AQ accelerometer.
`
`The LIS3L02AQ is a low-power, three-axis linear accelerometer that is mounted on the demo sensor board of the
`Sun SPOT. The accelerometer can be used to measure the motion of the SPOT. It can also measure the SPOT's
`orientation with respect to gravity. The Z-axis is perpendicular to the Sun SPOT boards. The X-axis is parallel to
`the row of LEDs on the sensor board. The Y-axis is parallel to the long edge of the sensor board.
`
`Figure 1. Accelerometer X, Y and Z axes
`
`In Figure 1, the plus (+) on the end of an axis indicates that when the device's acceleration vector increases in
`that direction, the associated accelerometer readings will grow larger. If the SPOT is sitting flat on a table then
`the acceleration due to the Earth's gravity will be 1g along the positive Z-axis, and 0g along the X and Y axes.
`Note that while gravity is pointing down (along the negative Z-axis) this is equivalent to a uniform upwards
`acceleration of 1g according to the Einstein equivalence principle even though the SPOT is not moving.
`
`The LIS3L02AQ accelerometer consists of a Micro-Electro-Mechanical System (MEMS) sensor element that is
`displaced from its nominal position when a linear acceleration is applied, causing an electrical imbalance that
`is read via the demo sensor board's analog-to-digital converter. The raw voltage value is then converted to
`g-force units. The accelerometer can be set to measure accelerations over a scale of either ± 2g or ± 6g. For a
`full description of the technical specifications of the LIS3L02AQ accelerometer please refer to the
`STMicroelectronics documentation available at http://www.st.com/stonline/products/literature/od/9321.pdf.
`
`The SPOT library includes both the IAccelerometer3D interface that defines the basic methods that any
`three-axis accelerometer should support, and the LIS3L02AQAccelerometer class that implements that
`interface along with several other methods specific to the LIS3L02AQ.
`
`The Basic IAccelerometer3D API
`
`The basic methods used to read the current acceleration in G's along each axis are getAccelX(),
`getAccelY() and getAccelZ(). A fourth method, getAccel(), returns the magnitude of the current total
`acceleration, ∣a∣. This is the vector sum of the acceleration along the X, Y & Z axes, ∣a∣= ax
`2.2  ay2  az
`
`
`
`Page 6 of 11
`
`

`

` Page 2 Using the LIS3L02AQ Accelerometer
`
`www.sunspotworld.com
`
`Here is a code fragment that will loop until the acceleration along the X-axis exceeds ¼ g:
`
`import com.sun.spot.sensorboard.EDemoBoard;
`import com.sun.spot.sensorboard.IAccelerometer3d;
`import com.sun.spot.util.Utils;
`
` IAccelerometer3D acc = EdemoBoard.getInstance().getAccelerometer();
`
` while (true) {
` double ax = acc.getAccelX();
` if (ax >= 0.25) {
` System.out.println(“X acceleration above threshold: ” + ax);
` break;
` }
` Util.sleep(250); // check every 1/4 second
` }
`
`Here's another fragment to detect when the SPOT is in motion by checking for the total acceleration to deviate
`from the 1g of gravity:
`
` public boolean isMoving() throws IOException {
` double mag = acc.getAccel();
` return Math.abs(mag – 1.0) >= 0.1;
` }
`
`Measuring relative acceleration
`Another set of methods, getRelativeAccelX(), getRelativeAccelY(), getRelativeAccelZ() and
`getRelativeAccel(), return the current acceleration relative to a previously measured acceleration. This
`allows one to zero out the force of gravity on the SPOT and measure the relative acceleration only. The
`method, setRestOffsets(), computes the current acceleration along each axis and saves it, establishing a
`new zero reading to be used by the above methods. Here is the above code example rewritten using the
`relative acceleration routines:
`
` acc.setRestOffsets(); // zero out the current forces on the SPOT
`
` public boolean isMoving() throws IOException {
` return acc.getRelativeAccel() >= 0.1;
` }
`
`Measuring tilt
`A third set of methods, getTiltX(), getTiltY() and getTiltZ(), use the acceleration along an axis in order
`to compute the inclination, or tilt, of that axis with respect to the total acceleration the SPOT is experiencing. If
`the SPOT is at rest then the tilt is measured with respect to gravity.
`
`total acceleration
`
`level
`
`axis
`

`
`Ɵ|
`
`|ā
`
`tilt angle
`
`aaxis
`
`Figure 2. Computing the tilt
`
`Page 7 of 11
`
`

`

` Page 3 Using the LIS3L02AQ Accelerometer
`
`www.sunspotworld.com
`
`
`
`As shown in Figure 2 the tilt angle can be computed as Ɵ = arcsin  aaxis∣a∣  where Ɵ is the tilt angle measured
`
`), aaxis is the acceleration measured along the given axis, and ∣a∣ is
`
`π 2
`
`π 2
`
`in radians (with a range of −
`the total acceleration.
`
` to 
`
`Here is a code example to measure the tilt of the SPOT and display the tilt in the LEDs like a bubble in a level:
`
` public void demoBubbleLevel() {
` for (int i = 0; i < 8; i++) {
` // turn off all LEDs
` leds[i].setOff();
` leds[i].setColor(LEDColor.BLUE); // set them to be blue when lit
` }
`
` while (true) {
` try {
` int tiltX = (int)Math.toDegrees(acc.getTiltX()); // returns [-90, +90]
` int offset = -tiltX / 15; // so bubble goes to higher side [6, -6]
` if (offset < -3) offset = -3; // clip angle to range [3, -3]
` if (offset > 3) offset = 3;
` leds[3 + offset].setOn(); // use 2 LEDs to display "bubble""
` leds[4 + offset].setOn();
` Utils.sleep(50); // update 20 times per second
` leds[3 + offset].setOff(); // clear display
` leds[4 + offset].setOff();
` } catch (IOException ex) {
` System.out.println("Error reading accelerometer: " + ex);
` }
` }
` }
`
`The above example is installed with the Sun SPOT SDK and can be found in:
`Demos/CodeSamples/AccelerometerSampleCode
`
`For most SPOT programs the functionality defined by IAccelerometer3D will be all that is needed.
`
`The LIS3L02AQAccelerometer API
`
`The LIS3L02AQ accelerometer can be set to measure accelerations over a scale of either ± 2g or ± 6g. The
`method setScale(int) is used to select the desired scale. it takes one argument, either the constant
`SCALE_2G or SCALE_6G.
`
`import com.sun.spot.sensorboard.EDemoBoard;
`import com.sun.spot.sensorboard.LIS3L02AQAccelerometer;
`
` LIS3L02AQAccelerometer acc =
`(LIS3L02AQAccelerometer)EdemoBoard.getInstance().getAccelerometer();
`
` acc.setScale(LIS3L02AQAccelerometer.SCALE_2G);
`
`// use the 2G scale
`
`The method getCurrentScale() returns an integer (either SCALE_2G or SCALE_6G) indicating which scale is
`currently selected. The method getScales() returns an array of integers, { 2, 6 }, that list the scales the
`accelerometer supports. Note that the constants, SCALE_2G and SCALE_6G, can be used as indices into this
`array. So after the code snippet above to select the 2G scale, the statement:
`
` int scale = acc.getScales()[acc.getCurrentScale()];
`
`would set the variable scale to a value of 2.
`
`The methods getRawX(), getRawY() and getRawZ() are used to get the raw voltage values read from each axis
`of the accelerometer. They return a value in the range 0 to 1023. To convert this value to G's requires two
`
`Page 8 of 11
`
`

`

` Page 4 Using the LIS3L02AQ Accelerometer
`
`www.sunspotworld.com
`
`steps: subtracting off the zero offset value for that axis which will shift the range to –offset to +offset, and then
`dividing by the gain for the axis to scale the value to G's.
`
`a =
`
`raw − zeroOffset
`gain
`
`The nominal zero offset value is 465.5 and the nominal gain for the 2G scale is 186.2, while for the 6G scale it is
`62.
`
`The routines getZeroOffsets() and getGains() each return a two-dimensional array, [2][3], giving the
`values for each axis at each scale. The routine getRestOffsets() returns a similar array containing the offsets
`for computing the relative acceleration. So the code to convert from a raw value into G's looks like:
`
` int scale = acc.getCurrentScale();
` double[][] gains = acc.getGains();
` double[][] zeroOffsets = acc.getZeroOffsets();
` double[][] restOffsets = acc.getRestOffsets();
`
` double accX = (acc.getRawX() - zeroOffsets[scale][0]) / gains[scale][0];
` double relX = (acc.getRawX() - restOffsets[scale][0]) / gains[scale][0];
`
`The zero offset and gain of each axis can differ by ±10% from one accelerometer to the next, or between axes
`of the same accelerometer. To get the greatest accuracy it is important to calibrate each SPOT's accelerometer
`as described below. Once the proper gains and zero offset values have been determined they can be passed to
`the accelerometer code with the methods setZeroOffsets(double[2][3]) and setGains(double[2][3]).
`There is also the routine setRestOffsets(double[2][3]) that can be used to specify the offsets for
`calculating the relative acceleration. The method saveCalibration() takes the current arrays of gains, zero
`offsets and rest offsets and saves them to the flash memory on the demo board. When the accelerometer code
`is initialized it tries to read the calibration values back in—if they do not exist it will default to using the
`nominal values.
`
`The LIS3L02AQ accelerometer has a self-test mode that is described in the Sun SPOT Theory of Operation
`document. The routine to enter/exit self-test mode is selfTest(boolean). The routine isInSelfTest()
`returns true if the accelerometer is currently in self-test mode.
`
`The final method that needs mention is reset(), which ensures that the accelerometer is not in self-test mode
`and also sets it to use the 2G scale.
`
`Calibrating the accelerometer
`
`A simple way to determine the correct zero offset and gain for a given axis of the accelerometer is to take two
`readings, one with the axis pointing straight upwards and one with it pointing straight downwards. Since both
`reading are aligned with gravity the average of the two readings is the zero offset, while one half of the
`difference between the two readings is the proper gain. This needs to be done for both scales.
`
`The zero offset value can also be computed by taking a reading when an axis is perpendicular to the Earth’s
`gravity—when one axis is pointing up or down the other two axes will read zero acceleration.
`
`An application to do this calibration is part of the Sun SPOT SDK. It can be found in the Demos directory in the
`CalibrateAccelerometer folder. If you deploy it to a SPOT and run it you will be able to calibrate the
`SPOT's accelerometer. The program uses 6 LEDs to indicate which orientations need to be calibrated (red) and
`which already have (green). When the SPOT's orientation lines up with an uncalibrated orientation the
`corresponding LED will turn white. To make a reading along the current orientation press switch 1 (just below
`
`Page 9 of 11
`
`

`

` Page 5 Using the LIS3L02AQ Accelerometer
`
`www.sunspotworld.com
`
`the LEDs on the left). The SPOT will signal that it is about to take a reading (flashing LEDs) and then for each
`axis take the average of 50 readings at the 2G scale, and then again using the 6G scale. If the SPOT's print
`output is being displayed, then the minimum, maximum and average values for each axis and scale will be
`printed. When readings have been taken along all 6 orientations the computed zero offsets and gains values
`will be printed.
`
`This calibration process is done twice. The second time uses the values from the first to tighten the constraints
`on what is an acceptable orientation.
`
`After the calibration process the accelerometer performs a self test (blue LEDs)—push switch 1 to start. If it
`passes then the calibration values, will be stored as persistent properties in the demo sensor board's Flash
`memory and used whenever a SPOT application uses the accelerometer in the future.
`
`A Word on Sampling Rates
`
`The rate at which an application needs to read the accelerometer will vary greatly and depends on the type of
`accelerometer data being measured. For an application concerned with measuring the SPOT's orientation a
`sample rate of 10-20 readings per second will usually suffice; likewise for gesture recognition. For measuring
`the motion of the SPOT when mounted in a toy slot car, a rate of 100 readings per second was more than
`adequate. If one wishes to measure vibrations then the Nyquist-Shannon sampling theorem tells us that the
`sampling frequency needs to be greater than twice the signal bandwidth. The question then is how high a
`sample rate is possible.
`
`Figure 3 shows the various components involved in reading accelerometer values.
`
`ADT7411
`analog-to-digital
`converter
`
`ARM9 processor
`
`x zy
`
`MEMS
`sensor
`
`sample
`and hold
`
`low-pass
`filter
`
`LIS3L02AQ accelerometer
`
`Figure 3. Components involved in reading the accelerometer
`
`The MEMS sensors of the LIS3L02AQ accelerometer are capable of measuring accelerations over a maximum
`bandwidth of 4.0 KHz for the X and Y axis and 2.5KHz for the Z axis. They are sampled internally at 66KHz. To
`implement low-pass filtering for antialiasing and noise reduction each output pin from the accelerometer has a
`capacitor to provide a simple, single-pole low-pass filter. The capacitor used on the SPOT demo sensor board is
`0.01µF which results in a cutoff frequency of 160Hz. Replacing this capacitor one can raise the cutoff frequency
`to 2.5KHz.
`
`The ADT7411 analog-to-digital converter can operate in either a round-robin or single channel mode. Reading a
`single channel it can perform a conversion every 45 microseconds, a sampling rate of 22.2KHz. In round-robin
`mode the a-to-d converts each of its 8 analog inputs every 579 microseconds, yielding a sampling rate of
`1.7KHz.
`
`The SPOT application running on the ARM9 processor takes about 124 microseconds to read a single raw
`accelerometer value from the a-to-d, which gives a maximum sampling rate of 8.1KHz. To also convert these to
`G's takes 151 microseconds per reading for a maximum sampling rate of 6.6KHz. Reading raw values for all
`three axes requires 370 microseconds, a sampling rate of 2.7KHz. Converting to G's takes 460 microseconds for
`
`Page 10 of 11
`
`

`

` Page 6 Using the LIS3L02AQ Accelerometer
`
`www.sunspotworld.com
`
`all three axes, or 2.2KHz. These maximum sample rates are only possible if the SPOT application is 100%
`dedicated to reading the accelerometer. If any other computation is performed in other threads that will
`decrease the sample rate and introduce jitter in when samples are taken and possibly even cause missed
`samples.
`
`Putting all of these factors together implies that the maximum sample rate is 320Hz, or slightly higher, to
`match up with the cutoff frequency of 160Hz. This means taking a set of readings every 3 .125 milliseconds,
`which is a rate that can be sustained and still allow for other computation to be done---including real-time
`analysis of the incoming accelerometer values. If radio packets are sent while reading the accelerometer, it
`might cause a sample period to be missed as it takes about 4 milliseconds to send a packet. Sample readings
`may also be lost due to garbage collection, though since a generational collection scheme is used by the
`Squawk Java VM, the expected delays from GC are only about 20-30 milliseconds.
`
`Replacing the capacitor to raise the cutoff frequency to 850Hz would allow all three axes to be read at a
`maximum rate of 1.7KHz. If only a single axis needs to be read then it should be possible to read one channel
`at a rate of 5KHz after raising the cutoff frequency to 2.5KHz---though at this rate samples could probably only
`be taken for a limited time.
`
`Note: To learn how to take samples at regular intervals please refer to the Sun SPOT Application Note on Using
`the AT91 Timer/Counters.
`
`About Sun Labs
`
`Established in 1990, Sun Microsystems Laboratories is the applied research and advanced development arm of
`Sun Microsystems, Inc., with locations in California and Massachusetts. Sun Labs is one of the ways Sun invests
`in the future, and is responsible for many of the technology advancements that have made Sun a technology
`powerhouse—including asynchronous and high-speed circuits, optical interconne cts, 3rd-generation Web
`technologies, sensors, network scaling and Java technologies. Although many companies have R&D groups,
`Sun Labs can claim one of the highest rates of technology transfer in the industry.
`
`Sun Microsystems, Inc. 4150 Network Circle, Santa Clara, CA 95054 USA Phone 1-650-960-1300 or 1-800-555-9SUN Web sun.com
`
`©2007 Sun Microsystems Inc. All rights reserved Sun, Sun Microsystems, the Sun logo,Solaris, Java, and HotSpot is are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. All
`SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. in the US and other countries. Products bearing SPARC trademarks are based upon an architecture developed by
`Sun Microsystems, Inc. 02/23/07
`
`Page 11 of 11
`
`

This document is available on Docket Alarm but you must sign up to view it.


Or .

Accessing this document will incur an additional charge of $.

After purchase, you can access this document again without charge.

Accept $ Charge
throbber

Still Working On It

This document is taking longer than usual to download. This can happen if we need to contact the court directly to obtain the document and their servers are running slowly.

Give it another minute or two to complete, and then try the refresh button.

throbber

A few More Minutes ... Still Working

It can take up to 5 minutes for us to download a document if the court servers are running slowly.

Thank you for your continued patience.

This document could not be displayed.

We could not find this document within its docket. Please go back to the docket page and check the link. If that does not work, go back to the docket and refresh it to pull the newest information.

Your account does not support viewing this document.

You need a Paid Account to view this document. Click here to change your account type.

Your account does not support viewing this document.

Set your membership status to view this document.

With a Docket Alarm membership, you'll get a whole lot more, including:

  • Up-to-date information for this case.
  • Email alerts whenever there is an update.
  • Full text search for other cases.
  • Get email alerts whenever a new case matches your search.

Become a Member

One Moment Please

The filing “” is large (MB) and is being downloaded.

Please refresh this page in a few minutes to see if the filing has been downloaded. The filing will also be emailed to you when the download completes.

Your document is on its way!

If you do not receive the document in five minutes, contact support at support@docketalarm.com.

Sealed Document

We are unable to display this document, it may be under a court ordered seal.

If you have proper credentials to access the file, you may proceed directly to the court's system using your government issued username and password.


Access Government Site

We are redirecting you
to a mobile optimized page.





Document Unreadable or Corrupt

Refresh this Document
Go to the Docket

We are unable to display this document.

Refresh this Document
Go to the Docket