throbber
3fiémh.mvm.mSZ0m
`
`
`
`
`
`
`
`a3:5magmakmbgcomtmumEmb8.0.3REG
`
`8.555%58:63
`
`
`
` mczooggfisoc.E“83955m9%:mmollmonamcaumagfimoa3:929:mafia
`
`
`aw.x0333.§6o
`............$33mcmflmhwn—
`
`
`amicowéaahdzz
`
`
`
`
`
`as»:693vaguefloor:039%;
`
`is. 3:5a.5.;£53..magmaE3.252858JHNMM”?
`
`
`
`
`__________:_____=_______
`
`ceammceooEommmom©
`E
`or"thmcmm
`
`
`
`
`
`
`
`QEAUCEQEGUuEmgoE_wm_o>v00>
`
`.xEummmn:0mfifimmg
`
`:33c_umucta
`
`Qualcomm, Exh. 2023, p. 1
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 1
`Apple v. Qualcomm, 2018-01277
`
`
`
`

`

`
`
`Read this first
`
`Before operating the unit, please read this
`manual thoroughly, and retain it for future
`reference.
`
`
`
`
`
`
`
`"to prevent fire or shock hazard,
`do not expose the unit to rain or
`moisture.
`
`CAUTION
`RISK OF ELECTRIC SHOCK
`DO N0? OPEN
`
`
`
`CAUTION: To REDUCE THE ntSK 0F ELECTWC SHOCK
`DO NOT REMOVE COVER (OR BACK).
`N3 USERvSEfiVlCEABLE PARTS lNSlDE.
`REFER SERVECHNG TO QUALEFEED SERVICE HERSGNNEL.
`
`This symbol is intended to
`alert the user to the presence
`of uninsulated “dangerous
`voitage" within the product’s
`enclosure. that may be of
`sufficient magnitude to
`constitute a risk. of electric
`
`shock to persons.
`
`This symbol is intended to
`aiert the user to the presence
`of important operating and
`maintenance (servicing)
`instructions in the iiteramre
`
`accompanying the appliance.
`
`Notice
`
`If static electricity or electromagnetism causes
`data transfer to discontinue midway (fail), restart
`the application or disconnect and connect the
`communication cable (USB, etc.) again.
`
`RECYCLING LITHIUM—IUN BAiTfifllES
`Lithiumwion batteries are
`
`
`
`recyclable. You can help preserve
`our environment by returning
`your used rechargeable batteries
`to the collection and recycling
`Eocation nearest you,
`For more information regarding recyciing of
`rechargeable batteries, caii toll free 1-800-822—
`8837, or visit http://wwwrbrcorg/
`
`Caution: Do not handle damaged or leaking
`Lithium—Ion batteries.
`
`“Memory Stick"
`
`This device complies with Part 15 of the FCC
`Rules. Operation is subject to the foliowing two
`conditions:
`
`(I) This device may not cause harmfui
`interference, and (2) this device must accept any
`interference received. including interference that
`may cause undesired operation.
`
`This Class B digital apparatus compiies with
`Canadian ICES-003.
`
`Qualcomm, Exh. 2023, p. 2
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 2
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`
`
`
`CAUTION
`
`If you have any questions about this product, you
`may call:
`Sony Customer Information Center lm8{)0~222-
`SONY (7669).
`The number below is for the FCC related matters
`
`only.
`
`Regulatory information
`
`Declaration of Conformity
`Trade Name: SONY
`Model No.: DCR—PCSS
`
`
`
`Responsible Party: Sony Electronics lnc.
`Address: 16450 W. Bernardo Dr, San Diego,
`CA 92127 U.S.A.
`
`Telephone No: 858~942~2230
`This device complies with Part 15 of the FCC
`Rules.
`
`Operation is subject to the following two
`conditions:
`
`(1) This device may not cause harmful
`interference, and (2) this device must
`accept any interference received, including
`interference that may cause undesired
`operation.
`
`Note
`
`DCR»PC55 is to be used with the Handycam
`Station Model DCRA-C 13% and AC Adaptor
`Model AC—LZOU.
`
`flwner’s Record
`
`The model and serial numbers are located on the
`
`bottom. Record the serial number in the space
`provided below. Refer to these numbers whenever
`you call upon your Sony dealer regarding this
`product.
`Model No. DCR-PCSS
`
`Serial No.
`
`Model No. AC~
`Serial No.
`
`You are cautioned that any changes or
`modifications not expressly approved in this
`manual could void your authority to operate this
`equipment.
`
`Note
`
`This equipment has been tested and found to
`comply with the limits for a Class B digital
`device, pursuant to Part l5 of the FCC Rules.
`These limits are designed to provide reasonable
`protection against harmful interference in a
`residential installation. This equipment generates,
`uses, and can radiate radio frequency energy and,
`if not installed and used in accordance with the
`
`instructions, may cause harmful interference to
`radio communications.
`
`However, there is no guarantee that interference
`will not occur in a particular installation. If
`this equipment does cause harmful interference
`to radio or television reception, which can be
`determined by turning the equipment off and
`on, the user is encouraged to try to correct the
`interference by one or more of the following
`measures:
`
`m Reorient or relocate the receiving antenna.
`m Increase the separation between the equipment
`and receiver.
`
`_ Connect the equipment into an outlet on a
`circuit different from that to which the receiver
`is connected.
`
`— Consult the dealer or an experienced radio/TV
`technician for help.
`
`The supplied interface cable must be used with
`the equipment in order to comply with the limits
`for a digital device pursuant to Subpart B of Part
`l5 of FCC Rules.
`
`Continued -> 3
`
`Qualcomm, Exh. 2023, p. 3
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 3
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`
`head this first {eentinaedi
`
`
`
`
`Your camcorder is supplied with two
`kinds of operations guides.
`
`w“Operating Guide” (This manual)
`~“First Step Guide” for using the supplied
`software (stored on the suppiied CD»
`ROM)
`
`0n the types of recording media you
`can use in yoer camcorder
`- A mini DV cassette marked with anv
`
`(mini DV cassettes with Cassette Memory
`are incompatible) (p. 99).
`. “Memory Stick Duo” marked with
`MEMORY S‘fiCK Dill], MEMORY SUCK PRU DUI]
`
`(p. 100).
`
`031 using the camcorder
`
`- Do not hold the camcorder by the
`foilowing parts.
`
`LCD panel
`
`
`
`
`Battery cover
`
`Shoe cover
`
`' Before connecting your camcorder to
`another device with a USB or i.LINK
`
`cabie, be sure to insert the connector
`
`plug in the proper direction. If you insert
`the connector plug forcibiy in the wrong
`direction, the terminai may be damaged,
`or this may cause a malfunction of your
`camcorder:
`
`' When disconnecting the AC Adaptor
`from the Handycam Station, hold both the
`DC plug and the Handycam Station and
`disconnect the AC Adaptor.
`- Be sure to turn the power of your
`camcorder off before inserting it into or
`removing it from the Handycam Station.
`
`On the menu items, LCD panet, and
`lens
`
`- A menu item that is grayed out is not
`available under the current recording 01‘
`playback conditions.
`- The LCD screen is manufactured using
`extremely highwpreciséon technology, so
`over 99.99% of the pixels are operational
`for effective use. However, there may
`be some tiny black points and/or bright
`points (white, red, blue, or green in coior)
`that appear constantly on the LCD screen.
`These points are normal results of the
`manufacturing process and do not affect
`the recording in any way.
`‘ Exposing the LCD screen or the lens to
`direct sunlight for long periods of time
`may cause malfunctions.
`- Do not aim at the sun. Doing so might
`cause your camcorder to malfunction.
`Take pictures of the sun only in low light
`conditions, such as at dusk.
`
`0n recording
`
`- Before starting to record, test the
`recording function to make sure the
`picture and sound are recorded without
`any probiems.
`- Compensation for the contents of
`recordings cannot be provided, even if
`recording or playback is not possible
`due to a malfunction of the camcorder,
`
`storage media, etc.
`- TV color systems differ depending on
`the countries/regions. To View your
`recordings on a TV, you need an NTSC
`system-based TV.
`0 Television programs, fiims, video tapes,
`and other materials may be copyrighted.
`Unauthorized recording of such materiais
`may be contrary to the copyright laws.
`
`Qualcomm, Exh. 2023, p. 4
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 4
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`
`On this manuai
`
`- The images of the LCD screen used in
`this manuai for iliustration purposes are
`captured using a digitai still camera, and
`therefore may appear different.
`- The cit—screen displays in each local
`language are used for illustrating the
`operating procedures. Change the screen
`language before using your camcorder if
`necessary (9. 16).
`
`About the Carl Zeiss lens
`
`Your camcorder is equipped with a Carl
`Zeiss lens, which was developed jointly
`by Carl Zeiss, in Germany, and Sony
`Corporation, and produces superior images.
`It adopts the MTF* measurement system
`for video cameras and offers a quality
`typical of a Carl Zeiss lens.
`* MTF stands for Modulation Transfer
`Function. The number value indicates the
`
`amount of light from a subject coming into
`the lens.
`
`Qualcomm, Exh. 2023, p. 5
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 5
`Apple v. Qualcomm, 2018-01277
`
`

`

`Table of Contents
`
`
`
`
`
`Step 1: Checking suppiied items ............................................................... 9
`
`Step 2: Charging the battery pack ........................................................... 10
`
`Step 3: Turning the power on and holding your camcorder firmly ........... 14
`
`Step 4: Adjusting the LCD panel ............................................................. 15
`
`Step 5: Using the touch panet ................................................................. 16
`Changing the language setting ..................................................................... 16
`Checking the screen indicators (Display guide) ........................................... 36
`
`Step 6: Setting the date and time ............................................................ 17
`
`Step 7: inserting a tape or a “Memory Stick Duo" .................................... t 8
`
` Recording/Playback
`
`Recording/Playback with ease (Easy Handycam) ................................... 20
`
`Recording ................................................................................................ 22
`
`Playback .................................................................................................. 23
`
`Functions used for recording/playback, etc. ............................................ 24
`Recording
`“0 use zoom
`
`*0 adjust the exposure for backlit subjects
`'0 adjust the focus for an off center subject (SPOT FOCUS)
`*0 fix the exposure for the selected subject (Fiexibée spot meter)
`*0 record in mirror mode
`
`
`
`'0 use a tripod
`Playback
`Viewing pictures with motion effects (SLIDE SHOW PLUS)
`”0 use PB zoom
`
`Recording/playback
`'“o check the remaining battery (Battery info)
`To turn off the operation confirmation beep (BEEP)
`*0 use specie? effects
`wo initialize the settings (RESET)
`Other part names and functions
`
`indicators displayed during recording/playback ....................................... 28
`
`Searching for the starting point ............................................................... 31
`
`Searching for the last scene of the most recent recording
`(END SEARCH) .............................................................................................. 31
`Searching manuatiy (EDIT SEARCH) ............................................................. 31
`Reviewing the most recently recordecfi scenes (Rec review) ......................... St
`
`Qualcomm, Exh. 2023, p. 6
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 6
`Apple v. Qualcomm, 2018-01277
`
`

`

`Remote Commander ............................................................................... 32
`
`Searching quickly for a desired scene (Zero set memory) ............................ 32
`Searching for a scene by date of recording (Date search) .......................... 33
`
`Playing the picture on a TV ..................................................................... 34
`
`
`fillsiing theMenu -
`_
`
`Using the menu items ............................................................ 36
`
`Menu items .............................................................................................. 38
`
` CAMERA SET menu .......................................................................... 40
`
`Settings to adjust your camcordet to the recording conditions (EXPOSURE!
`WHiTE BALt/STEADYSHOT. etc)
`
`
`
`MEMORY SET menu ......................................................................... 44
`
`Settings it)? the “Memory Stick Duo” (QUALITY/EMAGE SlZE/ALL ERASE/
`NEW FOLDER, etc.)
`
`
`5 “it-r PICT.APPLI. menu ............................................................................ 46
`
`Special effects on pictures or additional functions on recording/playback
`(FADER/PICT. EFFECT, etc.)
`
`
`
`EDIT/PLAY menu ............................................................................. 49
`
`Settiegs for editing or playing back in various modes (VARSPD PB/END
`SEARCH, etc»)
` STANDARD SET menu .................................................................... 50
`
`Settings while recording on a tape or other basic settings (REC MODE/
`MULTI-SOUND/LCD SET/'DlSP OUTPUT/USS) etc.)
`93% TlME/LANGU. menu ......................................................................... 53
`
`(CLOCK SEWWORLD TIME/LANGUAGE)
`
`Customizing Persona: Menu .................................................................... 54
`
`
`:5Dubhirig/Editing
`__
`_
`
`Connecting to a VCR or TV ..................................................................... 56
`
`Dubbing to another device such as a VCR, DVD recorder, etc ................ 5?
`
`Recording pictures from a VCR or TV ..................................................... 58
`
`Dubbing pictures from a tape to a “Memory Stick Duo” ........................... 59
`
`Dubbing sound to a recorded tape .......................................................... 60
`
`Deteting recorded pictures from the “Memory Stick Duo” ........................ 62
`
`Marking images on the “Memory Stick Duo” with specific informaiion
`(image protection/Print mark) ........................................................ 62
`
`Printing recorded images (PictBridge comptient printer) ......................... 63
`
`Jacks to connect externai devices ........................................................... 65
`Continued “i’ 7
`
`Qualcomm, Exh. 2023, p. 7
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 7
`Apple v. Qualcomm, 2018-01277
`
`

`

` insmgaciamputer 5:.
`..
`
`Before referring to the “First Step Guide” on your computer ................... 66
`
`Enstaliing the software and "First Step Guide” on a computer ................. 68
`
`Viewing “First Step Guide" ....................................................................... 72
`
`Creating a DVD (Direct Access to “Ciick to DVD”) ................................... 73
`
`Connecting an analog VCR to the computer via your camcorder (Signai
`convert function) ............................................................................ 76
`
`
`
`Troubieshooting ....................................................................................... 78
`
`Warning indicators and messages .......................................................... 94
`
`
`
`Using your camcorder abroad ................................................................. 98
`
`Usabte cassette tapes ............................................................................. 99
`
`About the “Memory Stick” ...................................................................... 100
`
`About the “infoLiTH|UM” battery pack ................................................... 102
`
`About i.L|NK .......................................................................................... 103
`
`Maintenance and precautions ............................................................... 104
`
`Specifications ........................................................................................ 108
`
`index ..................................................................................................... 11.0
`
`Qualcomm, Exh. 2023, p. 8
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 8
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`Step 1: Checking supplied items
`
`Make sure that you have following items
`supplied with your camcorder.
`The number in the parentheses inciicates the
`number of that item supplied.
`
`“Memory Stick Duo” 16MB (1) (p. 18, 100)
`
`A/V connecting cable (1) (p. 34. 56)
`m
`
`fiugttae.
`Operating Guide (This manual) (1)
`
`
`
`Memory Stick Duo adaptor (1) (p. 100)
`
`papers
`
`Foiéing the tip of the string makes it easier to
`run the string through the hook for the strap.
`
`Rechargeable battery pack NP-FASO (1)
`(p. 10, 102)
`
`(SD-ROM “Picture Package Ver.1.5“ (1)
`(p. 68)
`
`Haadycam Station (1) (p. 10)
`
`
`
`Wireless Remote Commander (1)
`(p. 32)
`
`
`
`A batten—type lithium battery is already installed.
`
`Qualcomm, Exh. 2023, p. 9
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 9
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`Step 2: Charging the battery pack
`
`You can charge the “InfoLITHIUM”
`battery pack {A series) (9. 102) after
`attaching it to your camcorder.
`
`- Only the “InfoLl'TH'IUM” battery pack (NP-
`FASU) can be used.
`
`POWER switch
`
`
`
`Handycam DC piug
`Station
`
`Power cord
`WW ‘
`To the wail outlet
`
`
`
`AC Adaptor
`
`1 Slide the battery cover in the
`direction of the arrow to open it.
`
`
`
`2 Insert the battery pack, atigning
`the top of the A mark on the side
`
`with the top of the A mark on
`
`your camcorder until it cticks.
`
`
`
`1B
`
`
`
`3 Close the battery cover.
`
`
`
`Be sure to close the cover completeiy.
`
`4 Slide the POWER switch up to
`OFF (CHG). (The defautt setting.)
`
`ONOFF MODEV“I3(CH6)
`
`POWER
`
`mPLAYED“MgMITAFE
`
`5 Connect the AC Adaptor to the
`DC 1N tack on the Handycam
`Station.
`
`
`
`
`
`
`With the A
`
`mark facing up
`
`DC iN jack
`
`6 Connect the power cord to the AC
`Adaptor and the wail outlet.
`
`Qualcomm, Exh. 2023, p. 10
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 10
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`
`
`
`7 install the camcorder onto the
`
`Handyoam Station.
`
`® Open the interface connector cover.
`
`
`
`® Place the camcorder on the Handycam
`Station properly aligned as shown in
`the illustration and gently push down
`at the point indicated by the arrow to
`fully install.
`
`
`
`The CHG (charge) lamp lights up and
`Charging starts.The CHG (charge)
`lamp turns off when the battery is fully
`charged.
`
`To charge the battery pack ustng only
`the AC Adaptor
`
`Turn off the power, then connect the
`AC Adaptor to the DC iN jack on your
`camcorder.
`
`- You can operate your camcorder
`connected to a power source such as a
`wall outlet as shown in the illustration.
`
`The battery pack will not lose its charge
`in this case.
`
`DC plug
`
`DC IN jack
`
`
`POWER Switch
`
`
`
`[3311918fiuauaa.
`
`To the wail outlet
`
`Continued-b 11
`
`Qualcomm, Exh. 2023, p. 11
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 11
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`
`
`
`Step 2: fihareiea the hattere aaek
`
`seatiaeeai
`
`To remove your camcorder from the
`Handyeam Station
`
`(D Turn the power of your camcorder off
`and then press the RELEASE button
`and remove the camcorder from the
`
`Charging time
`
`Approximate time (min) required when
`you foliy charge a fully discharged battery
`pack.
`
`
`Handycam Station.
`
`NP—FASO (supplied)
`
`125
`
`
`
`RELEASE button
`
`C2) Close the interface connector cover.
`
`
`
`To remove the battery pack
`
`Turn off the power. Open the battery cover
`and siide the battery out with your finger
`at the point indicated by the circle in the
`iiiustration.
`
`
`
`When storing the battery pack
`
`Fully discharge the battery before storing it
`for an extended period (p. 102).
`
`Recording time
`
`Approximate time (min) avaiiable when
`you use a fuily charged battery pack.
`
`
`
`NP—FASG
`
`(supplied)
`
`95
`
`1 10
`
`55
`
`65
`
`* Top: When the LCD backlight turns on.
`Bottom: When the LCD backiight turns off,
`- Typicai recording time shows the time when
`you repeat recording startfstop, turning the
`power onloff and zooming.
`
`Piaying time
`
`Approximate time (min) avaiiable when
`you use a fully charged battery pack.
`
`
`
`NP—FASO
`
`(supplied)
`
`105
`
`* When the LCD backlighr turns on.
`
`On the battery pack
`- Before changing the battery pack, slide the
`POWER switch up to OFF (CH6).
`- The CHG (charge) iamp flashes during
`charging. or the battery information (p. 26) wili
`not be correctly dispiayed under the following
`conditions.
`
`— The battery pack is not attached correctly.
`_ The battery pack is damaged.
`- The battery pack is fuiiy discharged. (For
`Battery info only.)
`
`12
`
`Qualcomm, Exh. 2023, p. 12
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 12
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`
`a:
`to
`=-:1
`a:
`0:Ft
`
`m7
`
`—S-m
`:1.
`
`
`
`' The power will not be supplied from the
`battery as long as the AC Adaptor is connected
`to the DC EN jack of your camcorder or the
`Handycam Station, even when the power cord is
`disconnected from the wall outlet.
`
`On the charginglrecordinglpiayback time
`- Times measured with the camcorder at
`25 0C (77 °F). (10 to 30 “C (50 DF to 86 °F) is
`recommended.)
`
`- The recording and playback time will be
`shorter when you use your camcorder in low
`temperatures.
`
`- The recording and playback time will be shorter
`depending on the conditions under which you
`use your camcorder.
`
`0n the AC Adaptor
`' Use the nearby wall outlet when using the AC
`Adaptor. Disconnect the AC Adaptor from the
`wall outlet immediately if any malfunction
`occurs while using your camcorder.
`- Do not use the AC Adaptor placed in a narrow
`space, such as between a wall and furniture.
`
`- Do not short-circuit the DC plug of the AC
`Adaptor or battery terminal with any metallic
`objects. This may cause a malfunction.
`
`PRECAUTEON
`
`- Even if your camcorder is turned off. AC power
`{house current) is still supplied to it while
`connected to the wall outlet via the AC Adaptor.
`
`13
`
`Qualcomm, Exh. 2023, p. 13
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 13
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`
`Step 3: Turning the power on and holding your
`camcorder firmly
`
`
`
`To record or play back, slide the POWER
`switch repeatedly to turn on the respective
`lamp.
`When using it for the first time, the
`{CLOCK SET] screen appears (p. 17).
`
`
`
`2 Hotd the camcorder correctly.
`
`
`
`POWER switch
`
`To turn off the power
`
`Slide the POWER switch up to OFF (CHG)
`while pressing the green button.
`
`0 At the time of purchase, the power will be
`set to turn off automatically if you leave your
`camcorder withoet any operation attempted for
`approximately 5 minutes, to save battery power.
`({ASHUT OFF}, p. 53).
`
`1 Slide the POWER switch
`
`repeatedly in the direction of the
`
`arrow to turn on the respective
`
`lamp.
`
`The lens cover opens automatically
`when the POWER switch is set to
`CAMERA-TAPE or CAMERA—MEM.
`
`
`
`If the POWER switch is
`
`set to OFF, slide it down
`while pressing the green
`button.
`
`Lamps that light up
`CAMERA-TAPE: To record on a tape.
`CAMERA-MEI“: To record on a “Memory
`Stick Duo.”
`
`PLAYIEDl-T: To play or edit pictures.
`
`. When you slide the POWER switch from OFF
`(CEO) to CAMERA-TAPE or CAMERA»
`MEM, the current date and time will be
`displayed on the LCD screen for about 5
`seconds.
`
`14
`
`Qualcomm, Exh. 2023, p. 14
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 14
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`Step 4: Adjusting the LCD panel
`
`
`TheCBpaneI
`
`Open the LCD panel 90 degrees to the
`camcorder (CD), then rotate it to the best
`angle to record or play (@).
`
`180 degrees
`
`90 degrees (max.)
`
`
`
`DISP/BATT INFO 90 Degrees to the
`camcorder
`
`- Do not press the buttons on the LCD frame
`accidentally when you open or adjust the LCD
`panel.
`
`- if you rotate the LCD panel 180 degrees to the
`lens side, you can close the LCD pane} with
`the LCD screen facing out. This is convenient
`during playback operations.
`
`Te darken the LCD screen
`
`Press and hoid DISP/BATT INFO for a few
`
`seconds until 353%; appears.
`This setting is practical when you use
`your camcorder in. bright conditions or
`where you want to save battery power. The
`recorded picture will not be affected by
`the setting. To turn on the LCD backlight,
`press and hold DISP/BATT INFO for a few
`seconds until EEBEF disappears.
`- See [LCD BRIGHT] (p. 50} to adjust the
`brightness of the LCD screen.
`
`
`
`panesflamesI
`
`15
`
`Qualcomm, Exh. 2023, p. 15
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 15
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`Step 5: Using the touch panel
`
`You can play back recorded pictures (1).
`23), or change the settings (p. 36) using the
`touch panel.
`
`1 Touch -
`
`Touch [MENEH during Easy Handycam
`operation (p. 20).
`
`PEace your hand on the rear side of
`the LCD panel to support it. Then,
`tou hth
`dis la ed on the
`mm P V
`
`Touch the button on the LCD screen.
`
`a h"
`-50."...
`
`El * MENU l
`l
`I E
`.
`as
`SPOT
`EFADER
`Focus
`[“3
`
`
`2 Touch [DISP GUIDE].
`
`The indicators vary depending on the
`
`
`settings. Select area let guide.
`
`
`é a ti? re.
`:Zjesraunt
`
`as
`
`3 Touch the area including the
`indicator that you want to check.
`The meanings of the indicators in the
`area are listed on the screen. If you
`cannot find the indicator you want to
`check, touch -/
`to toggle.
`When you touch -, the screen returns
`to the area selecting display.
`52
`
`DISP/BATT INFO
`- Perform the same actions as explained above
`when you press the buttons on the LCD frame.
`- Be careful not to press buttons on the LCD
`frame accidentally while using the touch panel.
`
`
`To hide the screen Indicators
`Press DISP/BATT INFO ‘0 toggle the
`screen indicators (such as time code, etc.)
`0“ or Off-
`
`
`
`You can change the onscreen displays
`to Show messages in a specified
`language. Select the screen language
`.
`.
`(31%
`1n {LANGUAGE} on the
`LANGU.) menu (p. 36, 53).
`
`(TIME/
`
`_
`.
`
`015? some
`
`
`FOCUS:
`mg?
`9 Wiggggfim
`,"v
`ssoruenr
`i“ 315;? saor:
`
`
`
`
`
`
`
`
`
`
`
`
`4 Touch [END].
`
`You can easily check the meaning of each
`indicator that appears on the LCD screen.
`
`16
`
`Qualcomm, Exh. 2023, p. 16
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 16
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`
`
`
`Step 6: Setting the date and time
`
`Set the date and time when using this
`camcorder for the first time. If you do not
`set the date and time, the [CLOCK SET]
`screen appears every time you turn on your
`camcorder or change the POWER switch
`position.
`‘ If you do not use your camcorder for about
`2 months, the buiit-in rechargeable battery
`gets discharged and the date and time settings
`may be cieared from the memory. In that case,
`charge the rechargeable battery and then set the
`date and time again (p. 107).
`
`
`
`POWER switch
`
`Skip to step 4 when you set the ciock for
`the first time.
`
`1 Touch
`
`« {MENU}.
`
`EXPOSURE
`
`0%.th
`SPOT METER
`
`2 Select 9% ('t‘lME/LANGU.) menu
`with (31$, then touch -.
`
`
`
`
`
`pawnsfiumae'
`
`3 Select [CLOCK SET} with film,
`then touch -.
`
`CLOCK SET
`
`§ ems
`
`3 22§05N JAM»!
`
`MWMJE;
`
`
`4 Set [Y] (year) with III/E}, then
`touch -.
`
`You can set any year up to the year
`207 9.
`
`
`
`
`
`5 Set {M} (month), [0} (day), hour
`and minute, then touch -.
`
`For midnight, set it to 12:00 AM.
`For midday, set it to 12:00 PM.
`The ciock starts.
`
`17
`
`Qualcomm, Exh. 2023, p. 17
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 17
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`Step 7: Inserting a tape or a “Memory Stick
`
`
`
`3 Ciose the iid.
`
`
`
`You can use mini DV WI)" cassettes only
`(p. 99).
`- The recordable time varies depending on [REC
`MODE] (p. 50).
`
`1 Slide and hold the i” OPEN!
`EJECT iever in the direction of
`
`the arrow and open the iid.
`
`i— OPEN/BEST lever
`
`
`
`Lid
`
`The cassette compartment automaticaliy
`comes out and opens up.
`
`2 insert a cassette with its window
`
`facing up, then press PUSH.
`
`PUSH
`
`Window
`
`
`
`Push the center of the
`back of the cassette
`
`lightiy.
`
`The cassette compartment automatically
`siides back in. Do not force the cassette
`
`into the compartment. This may cause a
`inaifunction.
`
`18
`
`To eject the cassette
`
`Proceed with the same steps as you would
`when inserting a cassette tape.
`
`
`
`You can use oniy a “Memory Stick
`Duo” marked with Mauser STICK Bus or
`
`MEMORY Sticx PRU Bun (p. 100).
`- The number and time of recordable pictures
`varies depending on the image quality or the
`image size. For details, see page 44.
`
`Insert the “Memory Stick Duo” into
`
`the “Memory Stick Duo” siot in the
`
`right direction until it clicks.
`
`Access temp
`
`
`
`With the A
`
`
`
`
`
`mark facing
`
`- If you force the “Memory Stick Duo”
`into the slot in the wrong ciirection, the
`“Memory Stick Duo,” the “Memory Stick
`{)uo” slot, or image data may be damaged.
`
`Qualcomm, Exh. 2023, p. 18
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 18
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`
`To eject a “Mammy Stick Duo”
`
`Lightly push the “Memory Stick Duo” in
`once.
`
`- When the access lamp is lit or flashing, your
`camcorder is reaciing/writing data. D0 net shake
`(it knock your camcorder, turn the power off,
`eject the “Memory Stick Duo,” or remove the
`battery pack. Otherwise, image data may be
`damaged.
`
`
`
`panelsfiumaa'
`
`19
`
`Qualcomm, Exh. 2023, p. 19
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 19
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`
`
`
`Bel’cording/lhakayc with ease
`(Easy Handvcaml
`
`
`
`With this Easy Handycam operation, most of the camera
`settings are automatically adjusted optimally, which frees
`you from detailed adjustment.
`Since only basic functions become available and screen font
`size increases for easy viewing, even first time users can
`enjoy easy operation.
`Go through the procedures described in steps 1 to 7 (p. 9 to
`18) Ibefore operation.
`
`
`
`
`
`
`
`in the direction of the arrow repeatedly to turn
`1 Slide the POWER switch
`on the respective lamp to select a recording medium.
`
`Recording movies -: Light up the
`CAMERA-TAPE lamp.
`
`
`Recording stiil images ”
`: Light up the
`CAMERAmMEM iamp.
`
`
`
`If the POWER
`switch
`is set to
`
`OFF, slide it down
`
`white pressing the
`green button.
`
`
`
`2 Press EASY I.
`
`EASY
`Sui: The EASY lamp lights u
`9 i\
`
`p
`
`in blue.
`
`ON
`
`Easy Hmdycam
`operation
`
`
`Press PHOTO LE].
`
`s
`
`JET:
`
`Beep
`
`P mom"
`
`
`
`
`
`Flashing w» Lights up
`Press and hold
`Press fully to record.
`iightly to adjust the
`focus.
`
`3 Start recording.
`
`Movies to
`
`Press REC START/STOP
`[[3])-
`
`(or
`
` START/STOP s
`
`The indicator {0) changes {STBY1 to
`iREC].
`
`To stop recording, press
`again.
`
`(or ED
`
`
`
`20“
`
`Qualcomm, Exh. 2023, p. 20
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 20
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`
`:3
`CD:3
`CI-!
`a.
`=
`ta‘I—
`EN
`‘<
`5'
`n:
`"
`
`O2
`
`
`
` Play!" hack
`
`
`1 Slide the POWER switch
`on the PLAYIEDIT lamp.
`
`in the direction of the arrow repeatedly to turn
`
`2 Press EASY I.
`
`EASY
`
`COD—EL:— The EASY lamp lights up in blue.
`
`I
`
`Easy Handycam
`operation
`
`ON
`
`3 Start playing back.
`
`Marries
`Touch ., then touch {Lt—JD to
`
`
`Touch
`m. CHI- to select
`
`a picture.
`
`
`WoLe
`T
`
`' +
`
`
`
`
`0 Tape playback
`9 Previous/Next
`
`0 Delete (p. 62)
`
`w Zoom (during recording) (p. 24)
`~ Turn the screen indicators onioff (p. 16)
`— “Playing the picture on a TV” (p. 34)
`~ “Bubbing to another device such as a VCR,
`DVB recorder, etc.” (p. 57)
`
`'- [lnvalid during Easy Handyeam operation]
`appears if operations not available during Easy
`Handycam are attempted.
`
`start playback.
`is available on
`Slow playback
`the Remote Commander.
`
`
`i’
`
`
`
`i I
`
`
`3 «ea [git ErikMENU]
`
`0 Stop
`
`3 Play/Pause toggles as you touch it
`0 Rewind/Fast forward
`
`To cancel Easy Handveam operation
`
`again.
`Press EASY
`The EASY lamp turns off and all the
`settings are returned to the previous
`situation.
`
`- The recording mode for tape and the image
`quality for “Memory Stick Duo" return to the
`default settings.
`0 What you can do during Easy Handycam
`operation
`— Adjust some menu settings (p. 38)
`If you touch {MENU}, adjustable items will
`be displayed. items not displayed return to
`the default settings.
`
`21
`
`Qualcomm, Exh. 2023, p. 21
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 21
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`Recording
`
`Lens cover
`
`Opens in accordance with the setting
`of the POWER switch.
`
`REC START/
`STOP
`
`7%
`
`PHOTO
`
` REC START/STOP
`
`POWER swrtch
`
`1 Slide the {POWER switch in the direction of the arrow repeatedly to turn on
`the respective lamp to select a recording medium.
`
`On a tape, light up the CAMERA—TAPE lamp.
`
`CAMBRA—MEM lamp.
`
` :‘ On a “Memory Stick Duo," light up the
`
`if the POWER
`
`switch is set to OFF,
`slide it down while
`
`pressing the green
`button.
`
`
`
`2 Start recording.
`
`
`"Movies. m 5e
`Press REC START/STOP
`(or
`Press and hold PHOTO lightiy to
`-).
`adjust the focus (0), then press it
`
`STOP
`START!
`
`The indicator (0) changes [STBY]
`(tape only) to {REC}.
`- The sound of a movie (MPEG MOVIE EX)
`recorded on a “Memory Stick Duo” will be
`monaurat
`
`
`
`Flashing W’ Lights up
`A shutter sound is heard. When
`fill disappears, the image has been
`recorded.
`
`To stop movie recording
`Press REC START/STOP again.
`- You can record a still image on a “Memory
`Stick Duo” while recording movies on a tape or
`in standby mode.
`
`To check the latest recording on a
`“Memory Stick Duo”
`Touch -_ To delete the picture, toech
`E] W, {YES}. Touch
`to return to the
`standby mode.
`
`22
`
`Qualcomm, Exh. 2023, p. 22
`Apple v. Qualcomm, 2018-01277
`
`Qualcomm, Exh. 2023, p. 22
`Apple v. Qualcomm, 2018-01277
`
`

`

`
`Playback
`
`1 Slide the POWER switch in the direction of the arrow repeatedty to turn on
`the PLAYIEDiT Eamp.
`
`
`
`-O
`u {f
`
`0NOFF MODEV—!I(CH3)
`AMERA MTAPE
`maPOWER
`
` m‘
`
`Touch MEMORY ,
`
`The most recently recorded image is
`displayed.
`
`
`‘i‘
`‘i
`
`
`
`

This document is available on Docket Alarm but you must sign up to view it.


Or .

Accessing this document will incur an additional charge of $.

After purchase, you can access this document again without charge.

Accept $ Charge
throbber

Still Working On It

This document is taking longer than usual to download. This can happen if we need to contact the court directly to obtain the document and their servers are running slowly.

Give it another minute or two to complete, and then try the refresh button.

throbber

A few More Minutes ... Still Working

It can take up to 5 minutes for us to download a document if the court servers are running slowly.

Thank you for your continued patience.

This document could not be displayed.

We could not find this document within its docket. Please go back to the docket page and check the link. If that does not work, go back to the docket and refresh it to pull the newest information.

Your account does not support viewing this document.

You need a Paid Account to view this document. Click here to change your account type.

Your account does not support viewing this document.

Set your membership status to view this document.

With a Docket Alarm membership, you'll get a whole lot more, including:

  • Up-to-date information for this case.
  • Email alerts whenever there is an update.
  • Full text search for other cases.
  • Get email alerts whenever a new case matches your search.

Become a Member

One Moment Please

The filing “” is large (MB) and is being downloaded.

Please refresh this page in a few minutes to see if the filing has been downloaded. The filing will also be emailed to you when the download completes.

Your document is on its way!

If you do not receive the document in five minutes, contact support at support@docketalarm.com.

Sealed Document

We are unable to display this document, it may be under a court ordered seal.

If you have proper credentials to access the file, you may proceed directly to the court's system using your government issued username and password.


Access Government Site

We are redirecting you
to a mobile optimized page.





Document Unreadable or Corrupt

Refresh this Document
Go to the Docket

We are unable to display this document.

Refresh this Document
Go to the Docket