`
`BEFORE THE PATENT TRIAL AND APPEAL BOARD
`
`LOWE’S COMPANIES, INC.,
`LOWE'S HOME CENTERS, LLC AND L G SOURCING, INC,
`Petitioners
`v.
`NICHIA CORPORATION,
`Patent Owner
`
`U.S. Patent No. 7,915,631
`
`“Light Emitting Device and Display”
`
`DECLARATION OF DR. ERIC BRETSCHNEIDER
`IN SUPPORT OF PETITION FOR INTER PARTES REVIEW OF U.S.
`PATENT NO. 7,915,631
`
`3470526 v1
`
`LOWES 1003, Page 1
`
`VIZIO Ex. 1003 Page 0001
`
`
`
`TABLE OF CONTENTS
`BACKGROUND AND QUALIFICATIONS ................................................... 1
`
`I.
`
`II. ASSIGNMENT AND MATERIALS REVIEWED .......................................... 3
`
`III. STATE OF THE ART ........................................................................................ 8
`A.
`The Principles of Color Mixing ............................................................. 8
`B. Measuring Color .................................................................................. 10
`C.
`In 1996, YAG Phosphors Were Well Known For Converting
`Blue Emissions To Yellow In Lighting Products ................................ 12
`Emergence of Commercially Viable Blue LEDs................................. 21
`The Blue Plus Yellow Approach to Making A White LED was
`a Natural And Obvious Progression .................................................... 23
`LED Controllers .................................................................................. 25
`
`D.
`E.
`
`F.
`
`IV. THE ‘631 PATENT .......................................................................................... 26
`A.
`The ‘631 Patent Specification .............................................................. 26
`B.
`The ‘631 Prosecution History .............................................................. 28
`
`V. CLAIMS OF THE ‘631 PATENT ................................................................... 28
`
`VI. CLAIM CONSTRUCTION.............................................................................. 31
`A.
`General Legal Standards ...................................................................... 31
`B.
`Terms Requiring Construction ............................................................ 34
`1.
`“transparent material” ............................................................... 34
`2.
`“diffuses” ................................................................................... 35
`
`VII. PATENTABILITY ANALYSIS ...................................................................... 36
`A.
`Legal Standards for Patentability ........................................................ 36
`B.
`The Cited Prior Art .............................................................................. 40
`1.
`Baretz ........................................................................................ 40
`2.
`Shimizu ..................................................................................... 40
`3.
`Matoba ....................................................................................... 41
`4.
`Pinnow ...................................................................................... 42
`
`3470526 v1
`
`LOWES 1003, Page 2
`
`-i-
`
`VIZIO Ex. 1003 Page 0002
`
`
`
`C.
`
`D.
`
`E.
`
`F.
`
`Nakamura .................................................................................. 43
`5.
`Ground 1: Baretz, Shimizu and Matoba Render Claims 1-2, 6,
`and 10-11 Obvious .............................................................................. 44
`b.
`Baretz Discloses Claim 2 .......................................................... 60
`c.
`Baretz Discloses Claim 6 .......................................................... 60
`d.
`Baretz Discloses Claim 10 ........................................................ 60
`e.
`Baretz Discloses Claim 11 ........................................................ 61
`Ground 2: Baretz, Shimizu, Matoba, and Pinnow Render
`Claims 4 and 7-8 Obvious ................................................................... 61
`1.
`Baretz, Shimizu, and Pinnow Disclose Claim 4 ........................ 62
`2.
`Pinnow Discloses Claim 7......................................................... 70
`3.
`Pinnow Discloses Claim 8......................................................... 71
`Ground 3: Baretz, Shimizu, Matoba, and Nakamura Render
`Claim 9 Obvious .................................................................................. 71
`a.
`Nakamura Discloses Claim 9 .................................................... 71
`b.
`A POSITA Would Have Been Motivated To
`Combine Baretz, Shimizu, Matoba, and Nakamura
`And Had a Reasonable Expectation of Success ........................ 72
`Ground 4: Matoba, Shimizu and Pinnow Render Claims 1, 4, 6-
`8, and 10-11 Obvious .......................................................................... 74
`a.
`Independent Claim 1 ................................................................. 75
`b.
`Matoba, Shimizu, and Pinnow Disclose Claim 4 ...................... 88
`c.
`Matoba, Shimizu, and Pinnow Disclose Claim 6 ...................... 89
`d.
`Matoba, Shimizu, and Pinnow Disclose Claim 7 ...................... 89
`e.
`Matoba, Shimizu, and Pinnow Disclose Claim 8 ...................... 89
`f.
`Matoba, Shimizu, and Pinnow Disclose Claim 10 .................... 90
`g.
`Matoba, Shimizu, and Pinnow Disclose Claim 11 .................... 90
`
`VIII. CONCLUSION ................................................................................................. 90
`
`3470526 v1
`
`LOWES 1003, Page 3
`
`-ii-
`
`VIZIO Ex. 1003 Page 0003
`
`
`
`I, Eric Bretschneider, do hereby declare and state as follows:
`
`I.
`
`BACKGROUND AND QUALIFICATIONS
`1.
`I have over 25 years of experience with lighting and LEDs, including a
`
`comprehensive background on the full range of LED production technologies,
`
`including MOCVD hardware/process, fabrication, LED chip and package testing
`
`and reliability, optical design, thermal management, color conversion, and SSL
`
`fixture/lamp design, integration, and reliability.
`
`2.
`
`I am currently the Chief Technology Officer at EB Designs &
`
`Technology. In that capacity, I am (among other things) responsible for the design
`
`of solid-state lighting technologies for clients ranging from startups to Fortune 100
`
`companies.
`
`3.
`
`I am also currently a member of the University of Florida Department
`
`of Chemical Engineering Advisory Board. And I have been a Conference Chair for
`
`LED Measurement and Standards. I am also a member of a number of professional
`
`societies, including SPIE, Materials Research Society, Illuminating Engineering
`
`Society (I am a member of the Science Advisory Panel as well as a member of
`
`numerous committees, most notably the IES Test Procedures Committee where I
`
`chair the Solid-State Lighting subcommittee).
`
`4.
`
`Prior to my position at EB Designs & Technology, I served as the
`
`Director of Engineering at HeathCo, LLC. In that capacity, I was responsible for
`
`advanced technology/product development related to solid state lighting, sensors,
`
`3470526 v1
`
`LOWES 1003, Page 4
`
`-1-
`
`VIZIO Ex. 1003 Page 0004
`
`
`
`notifications and control products.
`
`5.
`
`Prior to my position as Director of Engineering at HeathCo, I was
`
`positioned at the Elec-Tech International Co., Ltd., where I held the positions of
`
`Chief Engineer, ETi Lighting Research Institute and VP of Research and
`
`Development, ETi Solid State Lighting. In that capacity, my responsibilities
`
`included developing all technology and product roadmaps for markets in North
`
`America, China, Europe, and Japan.
`
`6.
`
`Between 2008 and 2011, I was positioned at Lighting Science Group
`
`Corp., first as a product development manager, and my responsibilities included
`
`developing solid state lighting products, then as VP of Research, and my
`
`responsibilities included developing advancedgdtgte LED models for product
`
`development and production control.
`
`7.
`
`Between 2004 and 2008, I was positioned at Toyoda Gosei North
`
`America, where I was a sales manager, and my responsibilities included managing
`
`and developing LED die and package sales accounts form the eastern region of North
`
`America.
`
`8.
`
`Between 2003 and 2004, I was positioned at Beeman Lighting, where I
`
`was Director of Solid State Lighting Engineering, and my responsibilities included
`
`leading development of solid state lighting systems and materials.
`
`9.
`
`I have also authored and presented more than a total of 30 publications,
`
`3470526 v1
`
`-2-
`
`LOWES 1003, Page 5
`
`VIZIO Ex. 1003 Page 0005
`
`
`
`presentations, and seminars, and I am a named inventor on 30 issued patents and
`
`over 25 pending patents.
`
`10.
`
`I have held various other positions, in addition to pursuing my Ph.D
`
`between 1989, when I earned my BSE in Chemical Engineering from Tulane
`
`University in 1989, and 2003. I earned a Ph.D. in Chemical Engineering from the
`
`University of Florida in 1999, where my graduate work focused on development of
`
`optoelectronic devices, including novel silicon based visible LEDs and sulfide based
`
`TFELD structures and zinc selenide blue LEDs.
`
`11. Based on the above education and experience, I believe that I have a
`
`detailed understanding of the state of the art during the relevant period, as well as a
`
`sound basis for opining how persons of skill in the art at that time would understand
`
`the technical issues in this case.
`
`12.
`
`I presently hold over 30 patents related to LED technology.
`
`13. A copy of my curriculum vitae is attached hereto as Appendix A.
`
`II.
`
`ASSIGNMENT AND MATERIALS REVIEWED
`I submit this declaration in support of the petition for Inter Partes
`14.
`
`Review of U.S. Patent No. 7,915,631 (“the ‘631 patent”) submitted by Lowe’s
`
`Companies, Inc., Lowe’s Home Centers, LLC and L G Sourcing, Inc (collectively,
`
`“Lowe’s Petitioners”).
`
`15.
`
`I am not an employee of Lowe’s Petitioners or of any affiliate or subsidiary
`
`thereof.
`
`3470526 v1
`
`-3-
`
`LOWES 1003, Page 6
`
`VIZIO Ex. 1003 Page 0006
`
`
`
`16.
`
`I am being compensated for my time at the rate of $400 per hour.
`
`17. My compensation is in no way dependent upon the substance of the
`
`opinions I offer below, or upon the outcome of Lowe’s Petitioners’ petition for
`
`Inter Partes review (or the outcome of the Inter Partes review, if trial is instituted).
`
`18.
`
`I have been asked to provide certain opinions relating to the
`
`patentability of the ‘631 patent. Specifically, I have been asked to provide my
`
`opinions regarding (i) the level of ordinary skill in the art to which the ‘631 patent
`
`pertains, and (ii) whether claims 1-2, 4 and 6-11 of the ‘631 patent are anticipated
`
`by or would have been obvious in view of the prior art.
`
`19.
`
`The opinions expressed in this declaration are not exhaustive of my
`
`opinions on the patentability of claims 1-2, 4 and 6-11 of the ‘631 patent. Therefore,
`
`the fact that I do not address a particular point should not be understood to indicate
`
`any opinion on my part that any claim otherwise complies with the patentability
`
`requirements.
`
`20.
`
`In forming my opinions, I have reviewed the ‘631 patent and its
`
`prosecution history, and the art cited during its prosecution history, as well as prior
`
`art to the ‘631 patent including:
`
`a) U.S. Patent No. 6,600,175 (“Baretz”) (Ex. 1005)
`
`b) Japanese Examined Patent Application Publication No. H08-7614 (“Ex.
`
`1006”)
`
`3470526 v1
`
`-4-
`
`LOWES 1003, Page 7
`
`VIZIO Ex. 1003 Page 0007
`
`
`
`c) Certified Translation of Japanese Examined Patent Application Publication
`
`No. H08-7614 (“Shimuzu”) (“Ex. 1007”)
`
`d) Japanese Unexamined Patent Application Publication No. H07-99345 (Ex.
`
`1008)
`
`e) Certified Translation of Japanese Unexamined Patent Application Publication
`
`No. H07-99345 (“Matoba”) (Ex. 1009)
`
`f) Japanese Laid Open Patent Application Publication No. H05-152609 (Ex.
`
`1010)
`
`g) Certified Translation of Japanese Laid Open Patent Application Publication
`
`No. H05-152609 (“Tadatsu”) (Ex. 1011)
`
`h) U.S. Patent No. 3,699,478 to Pinnow et al. (“Pinnow”) (Ex. 1012)
`
`i) U.S. Patent No. 3,816,576 to Auzel (“Auzel”) (Ex. 1013)
`
`j) U.S. Patent No. 5,796,376 to Banks (“Banks”) (Ex. 1014)
`
`k) Nakamura et. al., “High-power InGaN single-quantum-well-structure blue
`
`and violet light-emitting diodes,” Appl. Phys. Lett. 67 (13), 25 September
`
`1995 (“Nakamura”) (Ex. 1015)
`
`l)
`
`. Blasse et al., “Luminescent Materials,” Springer-Verlag (New York), 1994
`
`(“Blasse”) (Ex. 1016)
`
`m) W. O’Mara, “Liquid Crystal Flat Panel Displays,” Van Nostrand Reinhold,
`
`New York (1993) (“O’Mara”) (Ex. 1017)
`
`3470526 v1
`
`-5-
`
`LOWES 1003, Page 8
`
`VIZIO Ex. 1003 Page 0008
`
`
`
`n) M. Hoffman, “Improved color rendition in high pressure mercury vapor
`
`lamps,” Journal of the Illuminating Engineering Society, Vol. 6 No. 2, Jan.
`
`1997 (“Hoffman”) (Ex. 1021)
`
`o) U.S. Patent No. 3,691,482 to Pinnow et al. (Ex. 1022)
`
`p) H. Rossotti, “Colour,” Princeton University Press, 1983 (Ex. 1023)
`
`q) S. Nakamura et al., “Candela-class high brightness InGaN/AlGaN double-
`
`heterostructure blue-light emitting diodes,” Applied Physics Letters, No. 64
`
`No. 13 (Mar. 28, 1994) (Ex. 1024)
`
`r) G. Blasse et al., “A New Phosphor for Flying-Spot Cathode-Ray Tubes for
`
`Color Television: Yellow-Emitting Y3Al5O12-Ce3+, Applied Physics Letters,
`
`Vol. 11 No. 2 (Jul. 15, 1967) (Ex. 1025)
`
`s) G. Blasse et al, “Investigation of Some Ce3+-Activated Phosphors,” The
`
`Journal of Chemical Physics, Vol. 47 No. 12 (Dec. 15, 1967) (Ex. 1026)
`
`t) D.A. Pinnow et al., “Photoluminescent Conversion of Laser Light for Black
`
`and White and Multicolor Displays,” Applied Optics (Jan. 1971) (Ex. 1027)
`
`u) Herbert Maruska, Dissertation, Gallium Nitride Light-Emitting Diodes,
`
`Chapter 1 (Nov. 1974) (“Maruska”) (Ex. 1028)
`
`v) U.S. Patent No. 4,727,283 to van Kemenade et al. (“Phillips”) (Ex. 1026)
`
`w) U.S. Patent No. 3,740,570 to Kaelin et al. (“Kaelin”) (Ex. 1030)
`
`x) U.S. Patent No. 4,090,189 to Fisler (“Fisler”) (Ex. 1030)
`
`3470526 v1
`
`-6-
`
`LOWES 1003, Page 9
`
`VIZIO Ex. 1003 Page 0009
`
`
`
`y) U.S. Patent No. 3,819,974 to Stevenson et al. (“Stevenson”) (Ex. 1031)
`
`21.
`
`Likewise, in forming my opinions, I have reviewed the materials listed
`
`below:
`
`a) German Patent Application No. DE 19638667 A1 to Schlotter et al. (Ex.
`
`1018)
`
`b) Certified Translation of German Patent Application No. DE 19638667 A1 to
`
`Schlotter et al. (“Osram”) (Ex. 1019)
`
`c) U.S. Patent No. 7,078,732 to Reeh et al. (Ex. 1020)
`
`d) Class for Physics of the Royal Swedish Academy of Sciences, “Efficient Blue
`
`Light-Emitting Diodes Leading to Bright and Energy-Saving White Light
`
`Sources,” Kungl. Vetenskaps-Akademien (Oct. 7, 2014) (Ex. 1033)
`
`e) In re Cree Re-examination Examiner Decision (Ex. 1034)
`
`f) Trial Transcript in Everlight et al. v. Nichia Corp. et al., No. 12-cv-11758
`
`(E.D.Mich. Apr. 17, 2015) (Ex. 1035)
`
`g) U.S. Patent No. 7,531,960 to Shimizu et al (“’960 patent”) (Ex. 1036)
`
`h) U.S. Patent No. 5,998,925 to Shimizu et al (“’925 patent”) (Ex. 1037)
`
`i) BASF – The Chemical Company: Lumogen® F Yellow 083 Data Sheet (Ex.
`
`1038)
`
`j) BASF – The Chemical Company: Lumogen® F Orange 240 Data Sheet (Ex.
`
`1039)
`
`3470526 v1
`
`-7-
`
`LOWES 1003, Page 10
`
`VIZIO Ex. 1003 Page 0010
`
`
`
`k) Sinloihi’s EL Color Conversion Pigment – FA-000 Series (Ex. 1040)
`
`l)
`
`Institution Decision in IPR2017-00551 (Ex. 1041)
`
`m) Institution Decision in IPR2017-00552 (Ex. 1042)
`
`n) Institution Decision in IPR2017-00556 (Ex. 1043)
`
`o) Institution Decision in IPR2017-00558 (Ex. 1044)
`
`III.
`
`STATE OF THE ART
`
`A.
`22.
`
`The Principles of Color Mixing
`Persons of ordinary skill in the art working in lighting are generally
`
`focused on three principles: efficiency, lifetime, and quality of light, including the
`
`ability to render colors accurately. This has, essentially, been the focus of lighting
`
`for over the hundred years, and it has been the particular focus of LED lighting since
`
`the creation of the field.
`
`23. More generally, individuals have understood for centuries that various
`
`colors of light can be created by mixing light. These principles have been well-
`
`known for over 300 years since, in 1704, since described by Isaac Newton in 1704;
`
`for instance, Newton pointed out that “white” light could be produced by mixing
`
`blue and yellow light or by mixing red, green, and blue light. Color is detected in
`
`the human eye by cells in the retina that are sensitive to red, green, and blue light.
`
`These are the only colors that the human eye is capable of perceiving; all other colors
`
`are mixtures of red, green, and blue.
`
`3470526 v1
`
`-8-
`
`LOWES 1003, Page 11
`
`VIZIO Ex. 1003 Page 0011
`
`
`
`24. Different colors and mixes of colors correlate to different given
`
`wavelengths, as shown in the following chart:
`
`25.
`
`For example, as shown in the chart above, light having a wavelength of
`
`between 560 and 590 is perceived as shades of yellow, even if the perceived
`
`“yellow” light is generated by mixing green and red. Humans perceive white when
`
`the red, green, and blue cones within the eye are stimulated roughly equally. This is
`
`reflected by white appearing in the center of the color wheel, shown below:
`
`3470526 v1
`
`-9-
`
`LOWES 1003, Page 12
`
`VIZIO Ex. 1003 Page 0012
`
`
`
`26. As shown in the color wheel, white light can be generated in different
`
`ways, such as by mixing roughly equal parts red, green, and blue; or by mixing blue
`
`and yellow, which itself is a mixture of red and green. In Newton’s paper published
`
`in 1704, he described this basic principle – how white can be made either by mixing
`
`equal parts red, green, and blue or by combining blue and yellow.
`
`B. Measuring Color
`27. Color technology was developed and refined to the point that the first
`
`chromaticity diagrams were developed in the 1920s and 1930s. See generally CIE
`
`1931 2° Standard Observer (x-y coordinates). A chromaticity diagram reduces color
`
`mixing from an art to a science—precision and reproducibility are possible on such
`
`a diagram merely by setting out a set of x,y coordinates. Id. This precision relates
`
`to measurement of the light produced by a light source and its interaction with an
`
`object under the light source, but not necessarily to subjective human judgment
`
`about the quality of a color. Id.
`
`28.
`
`In particular, in 1931, the International Commission for Illumination
`
`(CIE) devised a chromaticity diagram. The CIE is the standards body that defines
`
`the “standard observer” and the CIE chromaticity curve. This diagram quantifies
`
`the relationship between physical pure colors (e.g., wavelengths) and the visible
`
`spectrum, as perceived by the human eye. A line connecting any two primary colors
`
`on the x and y axes will show the possible colors visible by combining those two
`
`3470526 v1
`
`-10-
`
`LOWES 1003, Page 13
`
`VIZIO Ex. 1003 Page 0013
`
`
`
`colors. In the below chart, for example, a line drawn between yellow light (550nm)
`
`and blue light (450nm) shows that those two colors will combine to make a white
`
`light. The “e” at the center of the diagram roughly correlates to a shade of white,
`
`although the diagram does not provide a specific definition of any particular white
`
`color. Adding more yellow to the blue-yellow combination will produce a more
`
`yellowish colored white, while adding more blue will produce a more blueish-
`
`colored white.
`
`3470526 v1
`
`-11-
`
`LOWES 1003, Page 14
`
`VIZIO Ex. 1003 Page 0014
`
`
`
`C.
`
`In 1996, YAG Phosphors Were Well Known For Converting Blue
`Emissions To Yellow In Lighting Products
`29. A phosphor absorbs light of one color and emits light of a different
`
`color. Because of this unique property, phosphors have been commonly used since
`
`at least the 1930s to mix colors. This color mixing is accomplished by placing a
`
`phosphor over a light source where the phosphor converts a portion of the light
`
`emitted by the light source to a different color and the remainder of light is emitted
`
`unaltered. The overall effect is the emission of light of two different colors, which
`
`will be perceived by the eye as a mixture of these two colors.
`
`30. Color-conversion of LEDs using phosphors, in particular, has been
`
`used since at least the 1960s. The first high-efficiency LEDs emitted in infrared,
`
`and researchers used phosphors to convert infrared to visible light, including colors
`
`like blue and green. Since that time, there has been a continual effort to improve the
`
`efficiency of LEDs, find new phosphor materials, and improve the efficiency of
`
`phosphor materials. This trend parallels the development of lighting sources and
`
`phosphors for fluorescent light, where most efforts were focused on making “white”
`
`light because of market expectations. Fluorescent light laid the foundation of
`
`conversion from short to long wavelength light.
`
`31. As part of the research on color-conversion of light from short to long
`
`wavelengths, individual researchers developed materials commonly referred to as
`
`“YAG” phosphors (among other rare-earth based phosphors) in the 1960s as one of
`
`3470526 v1
`
`-12-
`
`LOWES 1003, Page 15
`
`VIZIO Ex. 1003 Page 0015
`
`
`
`the finite number of design choices for particular types of conversions. At the time,
`
`these researchers were exploring the use of YAG and other rare-earth based
`
`phosphors for applications such as fluorescent tubes, incandescent lamps, and
`
`displays. Below I set forth just some of the relevant disclosures from this work,
`
`showing that YAG was known as proper substance for use in high-temperature
`
`environments with high light output, and specifically was suited for use with light
`
`of the range of wavelengths that would eventually be produced by GaN or InGaN
`
`LEDs:
`
`• Blasse & Bril, 1967: “Y3Al5O12-Ce shows a bright yellow emission under
`
`excitation with cathode rays as well as with blue radiation…. The emission
`
`from Y3Al5O12-Ce under cr [cathode ray] excitation … lies almost entirely in
`
`the visible with a broad band peaking at 550 nm…. Figure 2 shows that
`
`Y3Al5O12-Ce is most efficiently excited by 460 nm radiation. Ex. 1025,53-
`
`54. They explained that “YAG is most efficiently excited by 460 nm
`
`radiation,” which means that YAG is excited by a blue light source. Id.,54.
`
`Another key YAG characteristic was that it showed “a bright yellow
`
`emission.” Id.,53.1
`
`1
`
`I am very familiar with the Blasse & Bril (June 1967) and Blasse & Bril
`
`(December 1967) publications, and have previously reviewed them in a professional
`
`3470526 v1
`
`-13-
`
`LOWES 1003, Page 16
`
`VIZIO Ex. 1003 Page 0016
`
`
`
`• Hoffman, 1977: “The YAG:Ce phosphor is not excited by 254 nanometers
`
`and only weakly by 365 nanometers from the Hg arc. The excitation spectra
`
`… shows the very strong dependence of the emission intensity on the 436-nm
`
`Hg radiation.” “The emission of the phosphor is in a band peaking at about
`
`540 nanometers at 25° C shifting to about 560 nanometers at 300° C…. This
`
`is at the maximum eye sensitivity and close to the calculated peak of 590 nm
`
`for good lumen output in the system.” Ex. 1021,89.
`
`• Pinnow, 1972: “From the compositional standpoint, a preferred embodiment
`
`of the invention utilizes a screen coated with cerium-doped yttrium aluminum
`
`garnet (YAG) energized by an argon-ion laser arranged so as to emit at 4,880
`
`Ǻ. The cerium-activated phosphor emits over a broad range of wavelengths
`
`centering about 5,500 Ǻ.” Ex. 1012,1:43-46; see also
`
` id.,1:49-56
`
`(“Variations include other laser sources, such as a cadmium-ion laser which
`
`may emit at 4,416 Ǻ. as well as variations in the phosphor composition. All
`
`such compositions are cerium-activated and utilize a host of the garnet
`
`capacity prior to my involvement in this proceeding. Based on that review, I have
`
`determined that Exhibits 1025 and 1026 are true and correct copies of the Blasse &
`
`Bril publications, as were published in 1967. However, I do not rely on either Blasse
`
`& Bril reference as prior art, but rather as background to explain the state of the art.
`
`3470526 v1
`
`-14-
`
`LOWES 1003, Page 17
`
`VIZIO Ex. 1003 Page 0017
`
`
`
`structure (i.e.[,] the structure of Y3Al5O12) since this is the only known
`
`combination to produce reemission of the appropriate color and brightness.”).
`
`• Pinnow et al., 1971: “In order to test some of the above concepts, a display
`
`screen was fabricated by dusting YAG:Ce powder over a white cardboard
`
`sheet that had been coated with a transparent glue. This screen was used in
`
`conjunction with a real time test display system which used an argon ion laser
`
`source (4880 Ǻ) and solid state, acoustoopic deflectors.” Ex. 1027,156-157
`
`(“Similarly the combination of 4880-A light and converted light from a
`
`YAG:Ce phosphor will produce a somewhat yellowish-white appearance
`
`since the line connecting these primaries passes above illuminant C. To
`
`achieve a truer white with this phosphor requires a shorter laser wavelength
`
`such as the less intense 4579-A line of the argon laser or the 4416-A line of
`
`the Cd-He laser.” Pinnow et al. (1971) also discloses YAG:Ce emission on a
`
`CIE diagram at Figure 1:2
`
`2 I am very familiar the Pinnow 1971 publication, and have previously reviewed it
`
`in a professional capacity prior to my involvement in this proceeding. Based on that
`
`review, I have determined that Exhibit 1027 is a true and correct copy of the Pinnow
`
`1971 publication, as was published in 1967. However, I do not rely on Pinnow 1971
`
`as prior art, but rather as background to explain the state of the art.
`
`3470526 v1
`
`-15-
`
`LOWES 1003, Page 18
`
`VIZIO Ex. 1003 Page 0018
`
`
`
`• Philips, 1988. Describing YAG as well known for its absorption range and
`
`efficiency, and ability to reduce color temperature: “A low-pressure mercury
`
`vapour discharge lamp of the kind described in the opening paragraph is
`
`characterized according to the invention in that the lamp is provided with an
`
`absorption layer comprising an aluminate activated by trivalent cerium and
`
`having a garnet crystal structure…. The said garnet is a known luminescent
`
`material…, which absorbs shortwave ultraviolet radiation, but especially
`
`absorbs radiation having a wavelength between about 400 and 480 nm and
`
`converts it into radiation in a wide emission band (half-value width of about
`
`110 nm) with a maximum at about 560 nm. It has been found that the use of
`
`such a luminescent garnet in an absorption layer for three-band fluorescent
`
`3470526 v1
`
`-16-
`
`LOWES 1003, Page 19
`
`VIZIO Ex. 1003 Page 0019
`
`
`
`lamps leads to a shift of the colour point of the radiation emitted by the lamp
`
`and allows for a reduction of the colour temperature of the lamp…. A
`
`reduction of the colour temperature in itself could be attained with any yellow
`
`pigment absorbing blue radiation. However, a yellow pigment leads to a
`
`reduction (unacceptable for this lamp type) of the relative luminous flux so
`
`that it cannot be used. The use of the luminescent garnet in lamps according
`
`to the invention has the advantage that the absorbed radiation is no lost, but is
`
`converted with a high efficiency into visible radiation so that high relative
`
`luminous fluxes are obtained.” Ex. 1029,2:43-60,2:61-3:2.
`
`32.
`
`In general, the goal was to use YAG and other rare-earth based
`
`phosphors to make the light for a given application brighter, making it appropriate
`
`for use with lamps, projection displays and other “white light” technology. By the
`
`late sixties and early seventies, YAG and other rare-earth based phosphors were
`
`standard industrial materials (YAG itself had an industry standard number—“P46”
`
`(YAG with cerium) and "P53" (YAG with terbium), and, based on what was known
`
`about their characteristics in lighting, they were a standard material to use with any
`
`high-intensity blue light source because they allowed for broad emission and
`
`potentially improved quality of light.
`
`33.
`
`Indeed, as described above, since its discovery in the 1960s, YAG
`
`became the go-to phoshor to create white light from a blue light source. In 1969,
`
`3470526 v1
`
`-17-
`
`LOWES 1003, Page 20
`
`VIZIO Ex. 1003 Page 0020
`
`
`
`researchers were using YAG with, for instance, argon-ion laser beams which
`
`produced blue light, and it was well understood that YAG-type phosphors would
`
`work well with light within particular wavelength ranges, as described in the
`
`references cited immediately above. Likewise, in the 1970s, GE applied YAG to
`
`another commercially viable blue light source – mercury vapor lamps – as described
`
`in Hoffman above. Mercury vapor lamps emit light in the blue color region, with
`
`some lamps emitting too much blue. Similarly, Phillips taught the use of YAG
`
`Phosphors with blue mercury vapor lamps to “emit white light at a given color
`
`temperature.” Ex.1029,1:40-41, 3:9-18.
`
`34.
`
`These earlier publications also taught that YAG withstands harsh
`
`operating conditions. For instance, Hoffman taught that the temperature in mercury
`
`vapor lamps was 300° C. Ex. 1021,p. 91. The Pinnow references disclose the use
`
`of YAG with a laser that has anywhere from 50 to over 600 times the intensity of
`
`sunlight. Ex. 1027,p. 154. Blasse and Bril taught the use of YAG with cathode ray
`
`tubes, which would have been known to have a high radiation density. Ex. 1025,pp.
`
`53-54.
`
`35.
`
`Thus, by the early seventies, YAG and other rare-earth based phosphors
`
`were standard industrial materials (YAG itself had an industry standard number—
`
`“P46” (YAG with cerium) and "P53" (YAG with terbium), and, based on what was
`
`known about their characteristics in lighting, they were a standard material to use
`
`3470526 v1
`
`-18-
`
`LOWES 1003, Page 21
`
`VIZIO Ex. 1003 Page 0021
`
`
`
`with any high-intensity blue light source because they allowed for broad emission
`
`and potentially improved quality of light. YAG had been used by two of largest
`
`lighting companies in the world (Philips and GE) and one of the leading research
`
`laboratories in the U.S. (Bell Labs) to partially down-convert blue light emission
`
`into yellow light in order to make white light.
`
`36. At roughly the same time, researchers such as Stevenson and Maruska
`
`were working to grow GaN materials structures for use in blue LEDs. See, e.g.,
`
`Herbert Maruska, Dissertation, Gallium Nitride Light-Emitting Diodes, Chapter 1
`
`(Nov. 1974) (Ex. 1028); U.S. Patent No. 3,819,974 (Ex. 1032) (June 25, 1974 (listing
`
`inventors David A. Stevenson, Walden C. Rhines, and Herbert P Maruska)). By the
`
`mid-1970s, individuals understood that LEDs will be the light source of the future,
`
`given the potential efficiency, lifetime, and ability to create all colors of light by
`
`color-conversion techniques such as the use of phosphors with the LEDs. Early
`
`development in this field produced bright infrared LEDs (which were used with
`
`upconverting phosphors), and then yellow and green LEDs. It was understood that,
`
`charting out the development of the field, that what was needed was an efficient blue
`
`LED light source, as that would allow for the creation of “white” light using standard
`
`color-converting/color mixing techniques, including using standard down-
`
`3470526 v1
`
`-19-
`
`LOWES 1003, Page 22
`
`VIZIO Ex. 1003 Page 0022
`
`
`
`converting phosphors like YAG or other rare-earth phosphors.3 The researchers in
`
`this field were generally a small group who were well aware of various developments
`
`and work toward creating blue LEDs. Prior to the development of blue LEDs into
`
`high intensity light sources, much progress was made getting existent LEDs to
`
`produce brighter light by controlling starting materials and reducing impurity levels
`
`in the materials.
`
`37.
`
`To make blue LEDs, individuals worked with a variety of materials,
`
`including zinc selenide, zinc sulfide, silicon carbide, and boron nitride. For instance,
`
`within the zinc selenide line of development, Sumitomo eventually developed an
`
`elegant solution to creating white light by using a zinc selenide chip and a phosphor
`
`substrate. Additionally, researchers working with wide band-gap materials and
`
`structures to create blue LEDs began to use down-converting phosphors to convert
`
`the light.
`
`38. What developed within the field was that every time a new LED light
`
`source was developed, researchers suggested using a phosphor with that light source
`
`3 Down-conversion” refers to converting a light emission to a lower frequency
`
`emission and thus a higher wavelength, e.g., converting blue light at 450 nm
`
`wavelength to yellow light at 570 nm. Partial down-conversions means that some
`
`the original light (e.g., blue) is not converted.
`
`3470526 v1
`
`-20-
`
`LOWES 1003, Page 23
`
`VIZIO Ex. 1003 Page 0023
`
`
`
`that matched the light source's emission in order to make other colors. This is
`
`straightforward, because the ability