`
`R. JACOB BAKER, PH.D., P.E.
`
`Professor of Electrical and Computer Engineering
`Department of Electrical and Computer Engineering
`
`6775 Agave Azul Court
`Las Vegas, NV 89120
`
`(725) 777‐3755
`
`Email: rjacobbaker@gmail.com
`Website: http://CMOSedu.com/jbaker/jbaker.htm
`
`
`EDUCATION
`Ph.D. in Electrical Engineering; December 1993; University of Nevada, Reno, GPA 4.0/4.0. Dissertation
`Title: Applying power MOSFETs to the design of electronic and electro‐optic instrumentation.
`M.S. and B.S. in Electrical Engineering: May 1986 and 1988; University of Nevada, Las Vegas. Thesis
`Title: Three‐dimensional simulation of a MOSFET including the effects of gate oxide charge.
`ACADEMIC EXPERIENCE
`January 1991 ‐ Present: Professor of Electrical and Computer Engineering at the University of Nevada,
`Las Vegas from August 2012 to present. From January 2000 to July 2012 held various positions at
`Boise State University including: Professor (2003 – 2012), Department Chair (2004 ‐ 2007), and
`tenured Associate Professor (2000 ‐ 2003). From August 1993 to January 2000 was a
`tenured/tenure track faculty member at the University of Idaho: Assistant Professor (1993 ‐ 1998)
`and then tenured Associate Professor (1998 ‐ 2000). Lastly, from January 1991 to May 1993 held
`adjunct faculty positions in the departments of Electrical Engineering at the University of Nevada,
`Las Vegas and Reno. Additional details:
` Research is focused on analog and mixed‐signal integrated circuit fabrication and design.
`Worked with multi‐disciplinary teams (civil engineering, biology, materials science, etc.) on
`projects that have been funded by EPA, DARPA, NASA, Army, DMEA, and the AFRL.
` Current and past research and development interests are:
`o Capacitive sensing techniques using delta‐sigma modulation and interfacing to sensors
`o Circuit design and fabrication for the control, use, and storage of renewable energy using
`thermoelectric generators
`o Design of electrical/biological circuits and systems using electrowetting on dielectric for
`automating and controlling biological experiments
`o Design of readout integrated circuits (ROICs) for use with focal plane arrays (FPAs)
`o Heterogeneous integration of III‐V photonic devices (e.g. FPAs and VCSELs) with CMOS
`o Methods (e.g., 3D packaging and capacitive interconnects) to reduce power consumption in
`semiconductor memories, memory modules, and digital systems
`o Analog and mixed‐signal circuit fabrication and design for communication systems,
`synchronization, energy storage, data conversion, and interfaces
`
`Page 1
`
`R. JACOB BAKER, PH.D., P.E.
`
`
`
`Page 1 of 30
`
`SAMSUNG EXHIBIT 1003
`
`
`
`
`
`in wireless
`
`o The design of writing and sensing circuitry for emerging nonvolatile memory technologies,
`focal planes, and displays
`(arrays)
`in nascent nanotechnologies
`(e.g. magnetic,
`chalcogenide)
`o Reconfigurable electronics design and fabrication using nascent memory technologies such
`as the memristor
`o Finding an electronic, that is, no mechanical component, replacement for the hard disk
`drive using nascent fabrication technologies
`o Power electronics circuit design for consumers and consumer electronics including power
`management and adaptive control to reduce power consumption
`o Design of bandpass delta‐sigma modulators
`for
`IQ demodulation
`communication systems
`o University prototyping, fabricating, and packaging of integrated circuits
`Led, as chair, the department in graduate curriculum (MS and PhD), program development, and
`ABET accreditation visits.
` Worked with established and start‐up companies to provide technical expertise and identify
`employment opportunities for students.
` Held various leadership and service positions including: ECE chair, graduate coordinator, college
`curriculum committee (chair), promotion and tenure committee, scholarly activities committee,
`faculty search committee, university level search committees, etc. Collaborate with College of
`Engineering faculty on joint research projects.
` Taught courses in circuits, analog IC design, digital VLSI design and fabrication, and mixed‐signal
`integrated circuit design to both on‐ and, via the Internet, off‐campus students. Research
`emphasis in integrated circuit design using nascent technologies.
`INDUSTRIAL EXPERIENCE
`2013 ‐ present: Working with Freedom Photonics and Attollo Engineering in the Santa Barbara area on
`the integration, fabrication and design, of optoelectronics with CMOS integrated circuits. Work
`includes the design of compact optical transceivers for range finding applications, high‐efficiency
`integrated silicon avalanche photodetectors for quantum key receivers, Geiger mode SiGe receivers
`for long‐range communications, and the fabrication of near‐infrared focal plane arrays. Packaging
`and testing of numerous chips fabricated in both CMOS and SiGe technologies.
`2013 ‐ present: Working with National Security Technologies, LLC,) on the Design and Fabrication of
`Integrated electrical/photonic application specific integrated circuit (ASIC) design for use in the
`implementation of diagnostic instrumentation.
`2013 ‐ 2015: Consultant for OmniVision. Working on integrating CMOS image sensors (CIS) with
`memory for very high‐speed consumer imager products. Design specialty DRAM, high‐speed
`interfaces between CIS and DRAM, packaging techniques to pair the CIS with DRAM.
`2010 ‐ 2013: Worked with Arete’ Associates on the design of high‐speed compressive transimpedance
`amplifiers for LADAR projects and the design of ROIC unit cells. Work funded by the U. S. Air Force.
`2013: Cirque, Inc. Consulting on the design of analog‐to‐digital interfaces for capacitive touch displays
`and pads.
`2012: Consultant at Lockheed‐Martin Santa Barbara Focal Plane Array. CMOS circuit design and
`fabrication for the development and manufacture of infrared components and imaging systems
`with an emphasis on highest sensitivity Indium Antimonide (InSb) focal plane arrays (FPAs) in linear
`through large staring formats. Product groups include FPAs, integrated dewar assemblies (IDCAs),
`camera heads, high‐speed interfaces between image processors and imaging systems, and infrared
`imaging systems.
`
`R. JACOB BAKER, PH.D., P.E.
`
`
`
`Page 2
`
`Page 2 of 30
`
`
`
`2010 ‐ 2012: Working with Aerius Photonics (and then FLIR Inc. when Aerius was purchase by FLIR) on
`the design of Focal Plane Arrays funded (SBIRs and STTRs) by the U.S. Air Force, Navy, and Army.
`Experience with readout integrated circuits (ROICs) and the design/layout of photodetectors in
`standard CMOS.
`2009 ‐ 2010: Sun Microsystems, Inc. (now Oracle) VLSI research group. Provided consulting on memory
`circuit design/fabrication and proximity connection (PxC) interfaces to DRAMs and SRAMs for lower
`power, 3D packaging, for memory modules.
`2009 ‐ 2010: Contour Semiconductor, Inc. Design of NMOS voltage and current references as well as
`the design of a charge pump for an NMOS memory chip.
`1994 ‐ 2008: Affiliate faculty (Senior Designer), Micron Technology. Designed CMOS circuits for DRAMs
`including DLLs, PLLs for embedded graphics chips, voltage references and regulators, data
`converters, field‐emitting display drivers, sensing for MRAM (using delta‐sigma data conversion
`topologies), SRAMs, CMOS active pixel imagers and sensors, power supply design (linear and
`switching), input buffers, etc. Worked on a joint research project between Micron and HP labs in
`magnetic memory fabrication and design using the MTJ memory cell. Worked on numerous
`projects (too many to list) resulting in numerous US patents (see following list). Considerable
`experience working with product engineering to ensure high‐yield from the production line from
`fabrication to test. Co‐authored a book on DRAM circuit design through the support of Micron.
`Gained knowledge in the entire memory design process from fabrication to packaging. Developed,
`designed, and tested circuit design techniques for multi‐level cell (MLC) Flash memory using signal
`processing.
`January 2008: Consultant for Nascentric located in Austin, TX. Provide directions on circuit operation
`(DRAM, memory, and mixed‐signal) for fast SPICE circuit simulations.
`May 1997 ‐ May 1999: Consultant for Tower Semiconductor, Haifa, Israel. Designed CMOS integrated
`circuit cells for various modem chips, interfaces, and serial buses including USB circuits, charging
`circuits based upon power up/down circuits using an MOS or bandgap reference, pre‐amplifiers,
`comparators, etc.
`Summer 1998: Consultant for Amkor Wafer Fabrication Services, Micron Technology, and Rendition,
`Inc., Design PLLs and DLLs for custom ASICs and a graphics controller chip.
`Summers 1994 ‐ 1995: Micron Display Inc. Designing phase locked loop for generating a pixel clock for
`field emitting displays and a NTSC to RGB circuit on chip in NMOS. These displays are miniature
`color displays for camcorder and wrist watch size color television. Worked on the fabrication and
`design of video peripheral circuits for these displays.
`September ‐ October 1993: Lawrence Berkeley Laboratory. Designed and constructed a 40 A, 2 kV
`power MOSFET pulse generator with a 3 ns rise‐time and 8 ns fall‐time for driving Helmholtz coils.
`Summer 1993: Lawrence Livermore National Laboratory, Nova Laser Program. Researched picosecond
`instrumentation, including time‐domain design for impulse radar and imaging.
`December 1985 ‐ June 1993: (from July 1992 to June 1993 employed as a consultant while finishing up
`my Ph.D.), E.G.&G. Energy Measurements Inc., Nevada, Senior Electronics Design Engineer.
`Responsible for the design and manufacturing of instrumentation used in support of Lawrence
`Livermore National Laboratory's Nuclear Test Program. Responsible for designing and fabricating
`over 30 electronic and electro‐optic instruments including: CCD camera design, fiber optic
`transmitters employing high speed laser drive electronics, receivers employing envelop tracking for
`DC voltage restoration and regeneration of received information, receiver low noise amplifier
`design, frame synchronizers for re‐assembling transmitted images, high‐speed SRAM memory
`system design with battery back‐up, calibration equipment design such as a tunnel diode pulse
`generator for testing compensation of oscilloscopes and DAC design for calibrating CCD readout
`
`Page 3
`
`R. JACOB BAKER, PH.D., P.E.
`
`
`
`Page 3 of 30
`
`
`
`electronics, power supply and battery charger designs, sweep circuits for streak cameras, Pockel’s
`cell drive electronics, vertical amplifier design using HBTs for analog oscilloscopes used at the
`Nevada Test Site, and 10 kV ramp designs using a planar triode to name some of the designs.
`This position provided considerable fundamental grounding in EE with a broad exposure to PC
`board design to the design of cable equalizers. Summarizing, I gained experience in circuit design
`technologies including: bipolar, vacuum tubes (planar triodes for high voltages), hybrid integrated
`circuit fabrication and design, GaAs (high speed logic and HBTs), krytrons, power MOSFETs,
`microwave techniques, fiber optic transmitters/receivers, etc.
`Summer 1985: Reynolds Electrical Engineering Company, Las Vegas, Nevada. Gained hands on
`experience in primary and secondary power system design, installation and trouble‐shooting
`electric motors on mining equipment.
`MEMBERSHIPS IN PROFESSIONAL AND SCHOLARLY ORGANIZATIONS
`IEEE (student, 1983; member, 1988; senior member, 1997; Fellow, 2013)
`Member of the honor societies Eta Kappa Nu and Tau Beta Pi
`Licensed Professional Engineer
`HONORS AND AWARDS
`Consolidated Students of the University of Nevada, Las Vegas (CSUN) Faculty Award, 2017
`
`Tau Beta Pi UNLV Outstanding Professor of the Year in 2013 ‐ 2016
`
` UNLV ECE Department Distinguished Professor of the Year in 2015
`IEEE Fellow for contributions to the design of memory circuits ‐ 2013
`
` Distinguished Lecturer for the IEEE Solid‐State Circuits Society, 2012 ‐ 2015
`IEEE Circuits and Systems (CAS) Education Award ‐ 2011
`
`Twice elected to the Administrative Committee of the Solid‐State Circuits Society, 2011 ‐ 2016
`
`Frederick Emmons Terman Award from the American Society of Engineering Education ‐ 2007
`
`President’s Research and Scholarship Award, Boise State University ‐ 2005
`
` Honored Faculty Member ‐ Boise State University Top Ten Scholar/Alumni Association 2003
` Outstanding Department of Electrical Engineering faculty, Boise State 2001
`Recipient of the IEEE Power Electronics Society’s Best Paper Award in 2000
`
` University of Idaho, Department of Electrical Engineering outstanding researcher award, 1998‐99
` University of Idaho, College of Engineering Outstanding Young Faculty award, 1996‐97
`
`SERVICE
`Reviewer for IEEE transactions on solid‐state circuits, circuits and devices magazine, education,
`instrumentation, nanotechnology, VLSI, etc. Reviewer for several American Institute of Physics
`journals as well (Review of Scientific Instruments, Applied Physics letters, etc.) Board member of
`the IEEE press (reviewed dozens of books and book proposals). Reviewer for the National Institutes
`of Health. Technology editor and then Editor‐in‐Chief for the Solid‐State Circuits Magazine.
`Led the Department on ABET visits, curriculum and policy development, and new program
`development including the PhD in electrical and computer engineering. Provided significant
`University and College service in infrastructure development, Dean searches, VP searches, and
`growth of academic programs. Provided university/industry interactions including starting the ECE
`department’s advisory board. Held positions as the ECE department Masters graduate coordinator
`and coordinator for the Sophomore Outcomes Assessment Test (SOAT).
`Also currently serves, or has served, on the IEEE Press Editorial Board (1999‐2004), as a member of the
`first Academic Committee of the State Key Laboratory of Analog and Mixed‐Signal VLSI at the
`University of Macau, as editor for the Wiley‐IEEE Press Book Series on Microelectronic
`
`Page 4
`
`R. JACOB BAKER, PH.D., P.E.
`
`
`
`Page 4 of 30
`
`
`
`Systems (2010‐present), on the IEEE Solid‐State Circuits Society (SSCS) Administrative Committee
`(2011‐2016), as an Advisory Professor to the School of Electronic and Information Engineering at
`Beijing Jiaotong University, as a Distinguished Lecturer for the SSCS (2012‐2015), as the Technical
`Program Chair for the IEEE 58th 2015 International Midwest Symposium on Circuits and Systems,
`MWSCAS 2015, as advisor for the student branch of the IEEE at UNLV (2013‐present), and as the
`Technology Editor (2012‐2014) and Editor‐in‐Chief (2015‐present) for the IEEE Solid‐State Circuits
`Magazine,.
`ARMED FORCES
`6 years United States Marine Corps reserves (Fox Company, 2nd Battalion, 23rd Marines, 4th Marine
`Division), Honorable Discharge, October 23, 1987. Military Occupational Specialty was Machine
`Gunner (MOS 0331)
`TEXTBOOKS AUTHORED
`Baker, R. J., "CMOS Circuit Design, Layout and Simulation, Third Edition" Wiley‐IEEE, 1174 pages. ISBN
`978‐0470881323 (2010) Over 50,000 copies in print.
`Baker, R. J., “CMOS Mixed‐Signal Circuit Design,” Wiley‐IEEE, 329 pages. ISBN 978‐0470290262 (second
`edition, 2009) and ISBN 978‐0471227540 (first edition, 2002)
`Keeth, B., Baker, R. J., Johnson, B., and Lin, F., “DRAM Circuit Design: Fundamental and High‐Speed
`Topics”, Wiley‐IEEE, 2008, 201 pages. ISBN: 978‐0‐470‐18475‐2
`Keeth, B. and Baker, R. J., “DRAM Circuit Design: A Tutorial”, Wiley‐IEEE, 2001, 201 pages. ISBN 0‐7803‐
`6014‐1
`Baker, R. J., Li, H.W., and Boyce, D.E. "CMOS Circuit Design, Layout and Simulation," Wiley‐IEEE, 1998,
`904 pages. ISBN 978‐0780334168
`BOOKS, OTHER (edited, chapters, etc.)
`Saxena, V. and Baker, R. J., “Analog and Digital VLSI,” chapter in the CRC Handbook on Industrial
`Electronics, edited by J. D. Irwin and B. D. Wilamowski, CRC Press, 2009 second edition.
`Baker, R. J., “CMOS Analog Circuit Design,” (A self‐study course with study guide, videos, and tests.)
`IEEE Education Activity Department, 2000. ISBN 0‐7803‐4822‐2 (with textbook) and ISBN 0‐7803‐
`4823‐0 (without textbook)
`Baker, R. J., “CMOS Digital Circuit Design,” (A self‐study course with study guide, videos, and tests.) IEEE
`Education Activity Department, 2000. ISBN 0‐7803‐4812‐5 (with textbook) and ISBN 0‐7803‐4813‐3
`(without textbook)
`Li, H.W., Baker, R. J., and Thelen, D., “CMOS Amplifier Design,” chapter 19 in the CRC VLSI Handbook,
`edited by Wai‐kai Chen, CRC Press, 1999 (ISBN 0‐8493‐8593‐8) and the second edition in 2007 (ISBN
`978‐0‐8493‐4199‐1)
`INVITED TALKS AND SEMINARS
`Have given over 50 invited talks and seminars at the following locations: AMD (Fort Collins), AMI
`semiconductor, Arizona State University, Beijing Jiaotong University, Boise State University,
`Carleton University, Carnegie Mellon, Columbia University, Dublin City University (Ireland), E.G.&G.
`Energy Measurements, Foveon, the Franklin Institute, Georgia Tech, Gonzaga University, Hong
`Kong University of Science and Technology, ICySSS keynote, IEEE Electron Devices Conference
`(NVMTS), IEEE Workshop on Microelectronics and Electron Devices (WMED), Indian Institute of
`Science (Bangalore, India), Instituto de Informatica (Brazil), Instituto Tecnológico y de Estudios
`Superiores de Monterrey (ITESM, Mexico), Iowa State University, Lawrence Livermore National
`Laboratory, Lehigh University, Lockheed‐Martin, Micron Technology, Nascentric, National
`
`Page 5
`
`R. JACOB BAKER, PH.D., P.E.
`
`
`
`Page 5 of 30
`
`
`
`India), Southern
`Semiconductor, Princeton University, Rendition, Saintgits College (Kerala,
`Methodist University, Sun Microsystems, Stanford University, ST Microelectronics (Delhi, India),
`Temple University, Texas A&M University, Tower Semiconductor (Israel), University of Alabama
`(Tuscaloosa), University of Arkansas, University of Buenos Aires (Argentina), University of Houston,
`University of Idaho, University of Illinois (Urbana‐Champaign), Université Laval (Québec City,
`Québec), University of Macau, University of Maryland, Université de Montréal (École Polytechnique
`de Montréal), Xilinx (Ireland), University of Nevada (Las Vegas), University of Nevada (Reno),
`University of Toronto, University of Utah, Utah State University, and Yonsei University (Seoul, South
`Korea).
`RECENT RESEARCH FUNDING
`Recent funding listed below. In‐kind, equipment, and other non‐contract/grant funding [e.g., MOSIS
`support, money for travel for invited talks, etc.] not listed.
` Baker, R. Jacob, (2017‐2019) "Quantum Cryptography Detector Chip," Defense MicroElectronics
`Activity (DMEA), $266,029
` Baker, R. Jacob, (2017‐2019) “Advanced Printed Circuit Board Design Methods for Compact Optical
`Transceiver,” U.S. Army/DOD, $299,605
` Baker, R. Jacob, (2016‐2018) "High‐Sensitivity Monolithic Silicon APD and ROIC," U.S. Air
`Force/DOD, $299,665
`Integrated Circuit Collaboration,"
` Baker, R. Jacob, (2017‐2018) "Transimpedance Amplifier
`Department of Energy, National Security Technologies, LLC, $100,436
` Baker, R. Jacob, (2017) “Geiger Mode SiGe Receiver for Long‐Range Optical Communications,”
`NASA, $30,000
` Baker, R. Jacob, (2016‐2017) "Testing and development of BiCMOS photodetectors and diagnostic
`instrumentation," Department of Energy, National Security Technologies, LLC, $181,605
` Baker, R. Jacob, (2016‐2017) "Dual‐Mode, Extended Near Infrared, Focal Plane Arrays fabricated
`with a Commercial SiGe BiCMOS Process," DARPA, $41,892
` Baker, R. Jacob, (2015‐2016) "Photodetectors and high‐speed electronics using Silicon Germanium
`(SiGe) Bipolar/CMOS (BiCMOS) integrated circuits," Department of Energy, National Security
`Technologies, LLC, $100,000
` Baker, R. Jacob, (2015‐2016) “Advanced Printed Circuit Board Design Methods for Compact Optical
`Transceiver,” U.S. Army/DOD, $45,000
` Baker, R. Jacob, (2015) "Quantum Cryptography Detector Chip," Defense MicroElectronics Activity
`(DMEA), $45,000
` Baker, R. Jacob, (2014‐2015) "NSTec ASIC Integrated Circuit Collaboration," Department of
`Energy, National Security Technologies, LLC, $90,000
` Baker, R. Jacob, (2014‐2015) "Silicon Photonic‐Electronic System Level Integration," U.S. Air
`Force/DOD, $54,607
` Baker, R. Jacob, (2013‐2014) "NSTec ASIC Integrated Circuit Collaboration," Department of
`Energy, National Security Technologies, LLC, $162,074
`DOCTORAL STUDENT SUPERVSION
`7.
`Yiyan Li – Portable High Throughput Digital Microfluidics and On‐Chip Bacteria Cultures (2016)
`6.
`Yacouba Moumouni – Designing, Building, and Testing a Solar Thermoelectric Generation, STEG,
`for Energy Delivery to Remote Residential Areas in Developing Regions (2015)
`5. Qawi IbnZayd Harvard – Low‐Power, High‐Bandwidth, and Ultra‐Small Memory Module Design
`(2011)
`Vishal Saxena – K‐Delta‐1‐Sigma Modulators for Wideband Analog‐to‐Digital Conversion (2010)
`Robert Russell Hay – Digitally‐Tunable Surface Acoustic Wave Resonator (2009)
`
`Page 6
`
`4.
`3.
`
`R. JACOB BAKER, PH.D., P.E.
`
`
`
`Page 6 of 30
`
`
`
`1.
`
`2.
`
`Xiangli Li (the first Boise State University College of Engineering PhD graduate) – MOSFET
`Modulated Dual Conversion Gain CMOS Image Sensors (2008)
`Feng Lin, Research and Design of Low Jitter, Wide Locking‐Range Phase‐Locked and Delay‐Locked
`Loops (2000)
`MASTERS STUDENT SUPERVISION
`73. Claire Tsagkari – Design, Fabrication and Testing of a Capacitive Sensor Using Delta‐Sigma
`Modulation (2017)
`72. Kevin Buck – Fast Transient Digitzer and PCB Interface (2015)
`71. Marzieh Sharbat Maleki (2015)
`70. Angsuman Roy – Design, Fabrication and Testing of Monolithic Low‐Power Passive Sigma‐Delta
`Analog‐to‐Digital Converters (2015)
`69. Daniel Anderson – Design and Implementation of an Instruction Set Architecture and Instruction
`Execution Unit for the RZ9 Coprocessor System (2014)
`Jared Gordon – Design and Fabrication of an Infrared Optical Pyrometer ASIC (2013)
`68.
`Justin Butterfield (2012)
`67.
`66. Adam Johnson – Methods and Considerations for Testing Resistive Memories (2012)
`65. Ben Millemon – CMOS Characterization, Modeling, and Circuit Design in the Presence of Random
`Local Variation (2012)
`Justin Wood (2012)
`64.
`63. Chamunda Ndinawe Chamunda (2011)
`62. Gary VanAckern – Design Guide for CMOS Process On‐Chip 3D Inductors using Thru‐Wafer Vias
`(2011)
`61. Lucien Jan Bissey – High‐Voltage Programmable Delta‐Sigma Modulation Voltage‐Control Circuit
`(2010)
`60. Kaijun Li (2010)
`59. Yingting Li (co‐supervised with Maria Mitkova) (2010)
`58. Lael Matthews (co‐supervised with Said Ahmed‐Zaid) (2010)
`57. Priyanka Mukeshbhai Parikh (2010)
`56. Todd Plum (co‐supervised with Jeff Jessing) – Design and Fabrication of a Chemicapacitive Sensor
`for the Detection of Volatile Organic Compounds (2010)
`55. Rahul Srikonda (2010)
`54. Avani Falgun Trivedi (2010)
`53. Kuang Ming Yap – Gain and Offset Error Correction for CMOS Image Sensors using Delta‐Sigma
`Modulation (2010)
`52. Mahesh Balasubramanian – Phase Change Memory ‐ Array Development and Sensing Circuits
`using Delta‐Sigma Modulation (2009)
`51. Lincoln Bollschweiler (2009)
`50. Shantanu Gupta (2009)
`49. Qawi Harvard – Wide I_O DRAM Architecture Utilizing Proximity Communication (2009)
`48. Avinash Rajagiri (2009)
`47. Ramya Ramarapu (2009)
`46. Harikrishna Rapole (2009)
`45. Aruna Vadla (2009)
`44. Hemanth Ande (2008)
`43. Curtis Cahoon – Low‐Voltage CMOS Temperature Sensor Design using Schottky Diode‐Based
`References (2008)
`42. Prashanth Busa (2008)
`41.
`John McCoy III (2008)
`
`R. JACOB BAKER, PH.D., P.E.
`
`
`
`Page 7
`
`Page 7 of 30
`
`
`
`40. Dennis Montierth – Using Delta‐Sigma‐Modulation for Sensing in a CMOS Imager (2008)
`39. Rudi Rashwand (2008)
`38. Barsha Shrestha (co‐supervised with Zhu Han) – Wireless Access in Vehicular Environments using
`Bit Torrent and Bargaining (2008)
`37. Eric Becker – Design of an Integrated Half‐Cycle Delay Line Duty Cycle Corrector Delay Locked
`Loop (2007)
`36. Matthew Leslie – Noise‐Shaping Sense Amplifier for Cross‐Point Arrays (2007)
`35.
`Jose Monje (2007)
`34. Sanghyun Park (2007)
`33. Vishal Saxena – Indirect Feedback Compensation Techniques for Multi‐Stage Operational
`Amplifiers (2007)
`32. Meshack Appikatla (2006)
`31. Eric Booth – Wide Range, Low Jitter Delay‐Locked Loop Using a Graduated Digital Delay Line and
`Phase Interpolator (2006)
`30. Sucheta Das (2006)
`29. Krishna Duvvada – High Speed Digital CMOS Input Buffer Design (2006)
`28. Krishnamraju Kurra (2006)
`27. Soumya Narasimhan (2006)
`26. Roger Porter (2006)
`25. David Butler – Low‐Voltage Bandgap Reference Design Utilizing Schottky Diodes (2005)
`24. Dragos Dimitriu (2005)
`23. Surendranath Eruvuru – Sensing Circuit Design for an Ion Mobility Spectrometer (2005)
`22. Sandhya Sandireddy (2005)
`21. Harish Singidi (2005)
`20.
`Indira Vemula – Delta‐Sigma Modulator Used in CMOS Imagers (2005)
`19. Bhavana Kollimarla – A 1‐Bit Analog‐to‐Digital Converter Using Delta Sigma Modulation for
`Sensing in CMOS Imagers (2004)
`18. Sandeep Pemmaraju – High Voltage Charge Pump Circuit for an Ion Mobility Spectrometer (2004)
`17. Ravindra Puthumbaka – Circuit Design for an Ion Mobility Spectrometer (2004)
`16. Brandon Roth – Comparison of Asynchronous vs. Synchronous Design Technologies using a 16‐bit
`Binary Adder (2004)
`Jennifer Taylor – Reading and Writing Flash Memory Using Delta‐Sigma Modulation (2004)
`15.
`Jing Plaisted – Methods for Memory Testing (2003)
`14.
`13. Murugesh Subramaniam – Flash Memory Sensing Using Averaging (2003)
`12. Brian Johnson – Application of an Asynchronous FIFO in a DRAM Data Path (2002)
`11. Scott Ward – Electrostatic Discharge (ESD) Protection in CMOS (2002)
`10. Tyler Gomm – Design of a Delay‐Locked Loop with a DAC‐Controlled Analog Delay Line (2001)
`9.
`Gexin Huang (2001)
`8.
`Chris Atkins (2000)
`7.
`Thaddeus Black (2000)
`6.
`Zuxu Qin (2000)
`5.
`Hao Chen (1999)
`4.
`Doug Hackler (co‐supervised with Steve Parke) – TMOS: A Novel Design for MOSFET Technology
`(1999)
`Song Liu – Design of a CMOS 6‐bit Folding and Interpolating Analog‐to‐Digital Converter (1999)
`Ben Ba (1997)
`Brent Keeth – A Novel Architecture for Advanced High Density Dynamic Random Access Memories
`(1996)
`
`3.
`2.
`1.
`
`Page 8
`
`R. JACOB BAKER, PH.D., P.E.
`
`
`
`Page 8 of 30
`
`
`
`GRANTED US PATENTS
`148. Baker, R. J. and Parkinson, W. “NMOS regulated voltage reference,” 9,753,481, September 5,
`2017.
`147. Baker, R. J., “Digital Filters with Memory,” 9,734,894, August 15, 2017.
`146. Baker, R. J. and Keeth, B., "Optical interconnect in high‐speed memory systems," 9,697,883, July
`7, 2017
`145. Baker, R. J., “Comparators for delta‐sigma modulators,” 9,641,193, May 2, 2017.
`144. Baker, R. J., “Quantizing circuits having improved sensing,” 9,449,664, September 20, 2016.
`143. Baker, R. J., “Error detection for multi‐bit memory,” 9,336,084, May 10, 2016.
`142. Baker, R. J. and Keeth, B., “Optical interconnect in high‐speed memory systems,” 9,299,423,
`March 29, 2016.
`141. Baker, R. J., “Methods for sensing memory elements in semiconductor devices,” 9,299,405, March
`29, 2016.
`140. Baker, R. J., “Comparators for delta‐sigma modulators,” 9,135,962, September 15, 2015.
`139. Baker, R. J., “Resistive memory element sensing using averaging,” 9,081,042, July 14, 2015.
`138. Baker, R. J., “Digital Filters with Memory,” 9,070,469, June 30, 2015.
`137. Baker, R. J., "Reference current sources,” 8,879,327, November 4, 2014.
`136. Baker, R. J. and Beigel, K. D., “Multi‐resistive integrated circuit memory,” 8,878,274, November 4,
`2014.
`135. Baker, R. J., “Methods for sensing memory elements in semiconductor devices,” 8,854,899,
`October 7, 2014.
`134. Baker, R. J., “Quantizing circuits with variable parameters,” 8,830,105, September 9, 2014.
`133. Baker, R. J., “Integrators for delta‐sigma modulators,” 8,754,795, June 17, 2014.
`132. Baker, R. J., “Methods of quantizing signals using variable reference signals,” 8,717,220, May 6,
`2014.
`131. Baker, R. J. and Keeth, B., “Optical interconnect in high‐speed memory systems,” 8,712,249, April
`29, 2014.
`130. Baker, R. J., “Resistive memory element sensing using averaging,” 8,711,605, April 29, 2014.
`129. Baker, R. J., “Memory with correlated resistance,” 8,681,557, March 25, 2014.
`128. Baker, R. J., “Reference current sources,” 8,675,413, March 18, 2014.
`127. Baker, R. J., “Methods for sensing memory elements in semiconductor devices,” 8,582,375,
`November 12, 2013.
`126. Linder, L. F., Renner, D., MacDougal, M., Geske, J., and Baker, R. J., “Dual well read‐out integrated
`circuit (ROIC),” 8,581,168, November 12, 2013.
`125. Li, W., Schoenfeld, A., and Baker, R. J., “Method and apparatus for providing symmetrical output
`data for a double data rate DRAM,” 8,516,292, August 20, 2013.
`124. Baker, R. Jacob, “Resistive memory element sensing using averaging,” 8,441,834, May 14, 2013.
`123. Qawi, Q. I., Drost, R. J., and Baker, R. Jacob, "Increased DRAM‐array throughput using
`inactive bitlines," 8,395,947, March 12, 2013.
`122. Baker, R. Jacob, “Memory with correlated resistance,” 8,289,772, October 16, 2012.
`121. Lin, F. and Baker, R. Jacob, “Phase splitter using digital delay locked loops,” 8,218,708, July 10,
`2012.
`120. Baker, R. Jacob, “Subtraction circuits and digital‐to‐analog converters for semiconductor
`devices,” 8,194,477, June 5, 2012.
`119. Baker, R. J., “Digital Filters for Semiconductor Devices,” 8,149,646, April 3, 2012.
`118. Baker, R. J., “Error detection for multi‐bit memory,” 8,117,520, February 14, 2012.
`117. Baker, R. J., “Integrators for delta‐sigma modulators,” 8,102,295, January 24, 2012.
`
`Page 9
`
`R. JACOB BAKER, PH.D., P.E.
`
`
`
`Page 9 of 30
`
`
`
`internal data storage
`
`including analog‐to‐digital converters for
`116. Baker, R. J., “Devices
`locations,” 8,098,180, January 17, 2012.
`115. Baker, R. J. and Beigel, K. D., “Multi‐resistive integrated circuit memory,” 8,093,643, January 10,
`2012.
`114. Baker, R. J., “Quantizing circuits with variable parameters,” 8,089,387, January 3, 2012.
`113. Baker, R. J., “Reference current sources,” 8,068,367, November 29, 2011.
`112. Baker, R. J., “Methods of quantizing signals using variable reference signals,” 8,068,046,
`November 29, 2011.
`111. Baker, R. J., “Systems and devices including memory with built‐in self‐test and methods of making
`using the same,” 8,042,012, October 18, 2011.
`110. Baker, R. J., “Memory with correlated resistance,” 7,969,783, June 28, 2011.
`109. Baker, R. J. and Keeth, B., “Optical interconnect in high‐speed memory systems,” 7,941,056, May
`10, 2011.
`108. Baker, R. J., “K‐delta‐1‐sigma modulator,” 7,916,054, March 29, 2011.
`107. Li, W., Schoenfeld, A., and Baker, R. J., “Method and apparatus for providing symmetrical output
`data for a double data rate DRAM,” 7,877,623, January 25, 2011.
`106. Lin, F. and Baker, R. J., “Phase splitter using digital delay locked loops,” 7,873,131, January 18,
`2011.
`105. Hush, G. and Baker, R. J., “Complementary bit PCRAM sense amplifier and method of
`operation,” 7,869,249, January 11, 2011.
`104. Baker, R. J., “Subtraction circuits and digital‐to‐analog converters for semiconductor devices,”
`7,839,703, November 23, 2010.
`103. Baker, R. J., “Digital Filters with Memory” 7,830,729, November 9, 2010.
`102. Baker, R. J., “Systems and devices including memory with built‐in self test and methods of making
`using the same,” 7,818,638, October 19, 2010.
`101. Baker, R. J., “Integrators for delta‐sigma