`___________________________________________________________________________
`
`GLEN STEVICK, Ph.D., P.E.
`Mechanical Engineer, Principal
`
`Bio/Summary
`Dr. Stevick has over 25 years of experience in failure analysis and design of structures,
`consumer products, industrial equipment and medical devices, specifically mechanical-
`electrical systems; aortic, hip and knee implants; medical cauterizing forceps; turbines and
`reciprocating engines; automotive and aircraft components; offshore platforms and drilling
`equipment including pressure vessels/piping/containers, blowout and breakaway devices,
`heat exchangers and combustion analysis. Engineering projects have involved testing and
`mathematical analysis of hydraulic systems, fire causation and spread, explosion causation
`and prevention, structural dynamics, electronic control systems, material behavior, heat
`transfer and structure/fluid interaction.
`
`Select Industry Experience
`
`• Oil & Gas Industry
`• Ultra-Deepwater Well
`Control, Offshore Drilling
`•
`Earthquake Engineering
`• Automobile / Truck /
`Motorcycle
`• Medical Implants
`• Medical Devices
`• Manufacturing
`• Heavy Equipment
`• Offshore Oil Platforms
`
`•
`•
`
`• Maritime
`•
`Blowout and Breakaway
`Devices
`Plastics / Metals /Ceramics
`Combustible Fluid
`Containers; Explosions;
` Fire Propagation &
`Suppression
`• Aviation
`•
`Roofs
`•
`Elevators
`
`•
`Construction
`•
`Structural Dynamics
`•
`Concussion/Whiplash
`• Heat Exchangers
`•
`Piping, Pipelines &
`Pressure Vessels
`Bridge Dampening
`Calculations
`Transportation
`Large Structures
`Ships / Sailboats
`
`•
`•
`•
`
`•
`
`Education
`Ph.D. in Mechanical Engineering from U.C. Berkeley
`M.S. in Mechanical Engineering from U.C. Berkeley
`B.S. in Mechanical Engineering from Michigan Technological University
`
`Professional Affiliations
`Registered Mechanical Engineer, State of California, Nevada, Utah, Louisiana
`American Society of Mechanical Engineers
`Society of Forensic Engineer and Scientists
`Vibrations Institute
`Berkeley Engineering And Research, Inc. · 808 Gilman Street, Berkeley, CA 94710
`www.bearinc.com · glen@bearinc.com · 510-549-3300x1
`
`IRONBURG EX2002, Page 1
`
`
`
`Curriculum Vitae
`___________________________________________________________________________
`
`Member of ASTM Committee F15.1
`
`Work Experience
`
`Since 1986 Principal, Consultant
`Berkeley Engineering And Research, Inc., Berkeley, CA
`Provide consultation in the areas of failure analysis and design failures, including analysis of
`codes and standards, medical devices and industrial equipment. Failure analysis work has
`varied from assessing the failure of cranes, medical implants, bone fractures, ladders, chairs,
`industrial presses, aircraft turbine engines, and propane/natural gas equipment and
`electronics to the analysis of defective safety devices on compressor/heat exchanger
`systems and fire investigation. Design projects have included the redesign of an electro-
`hydraulic, variable position hospital bed for burn victims; medical implants (spine rod, heart
`valve, aorta insert, pacemaker, hip, knee and fatigue design); the design of a powered
`wheelchair that provides standing and sitting positions; the analysis and redesign of high
`temperature/high pressure piping and pressure vessels; the design of fire safe storage vaults
`for electronic media; dynamic damping devices for tall structures and bridges subject to
`wind and earthquake loading; the redesign of pistons and valves for high pressure hydrogen
`compressors; and, electronic sensors for structural health monitoring.
`
`Fire investigation, electrical, and combustion analysis cases have included the evaluation of
`over 200 home fires; dozens of propane and natural gas fired equipment fires, including
`barbecues, heaters, furnaces and cooking appliances; refinery, chemical plant, power plant
`and coal processing plant fires and explosions; and the evaluation of fuel containers,
`including propane tanks, charcoal lighter fluid cans, and gasoline containers from 1 gallon
`consumer containers to tanks containing thousands of gallons. More than 200 gasoline fire
`and explosion tests have been conducted at BEAR as well as hundreds of magnetic field,
`electric field and spark tests. Design projects have included the design and evaluation of
`hydrocarbon handling equipment (towers, tanks, pumps, compressors, piping, valves, heat
`exchangers and furnaces), burner and flow modeling, leak detection methods for tanks,
`flame arrestors for storage, relief and vapor recovery systems, and burn/spark/fire resistant
`cauterizing forceps for surgery.
`
`8/90 - 1/91, Mechanical Engineering Instructor, U.C. Berkeley
`Instructor for the Department's senior design course: ME-102B, "Mechanical Engineering
`Design". Conducted lectures on the design of bolted joints, springs, gears, bearings, chain
`drives, wire ropes, and other mechanical components. Guided students through a major
`design project.
`
`Berkeley Engineering And Research, Inc. · 808 Gilman Street, Berkeley, CA 94710
`www.bearinc.com · glen@bearinc.com · 510-549-3300x1
`
`IRONBURG EX2002, Page 2
`
`
`
`Curriculum Vitae
`___________________________________________________________________________
`
`3/82 - 1/89, Engineering Mechanics Specialist, Chevron Corporation
`Handled highly technical projects and provided technical consultation to field engineers in
`the areas of failure analysis and design. Projects included the redesign of compressor and
`turbine components, and the design of processing equipment for service temperatures
`above 1400 degrees Fahrenheit. Consultation varied from giving design advice on how to
`avoid structural vibration to calculating crack growth rates for offshore platforms in the
`North Sea.
`
`9/81-3/82, Project Engineer, Chevron USA Production
`Responsibilities included the design, and construction management of oil/water separation
`plants and gas recovery plants in the Bakersfield and Colinga oil fields.
`
`Patents
`“Thermo-electric Container for Heating and Cooling Liquids,” G.R. Stevick and H. Sherback.
`
`“Method and Apparatus for Dynamic Space-Time Imaging System,” G.R. Stevick, J. Singer,
`and D. Rondinone.
`
`"Method and Apparatus for Magnetic Response Imaging," Jerome R. Singer, Glen Stevick,
`David Rondinone, John Zalabak.
`
`Publications and Selected Reports
`Stevick, Glen, Joseph Zicherman, David Rondinone, and Allan Sagle. "Failure Analysis and
`Prevention of Fires and Explosions with Plastic Gasoline Containers." Journal of
`Failure Analysis and Prevention 11.5 (2011): 455-65.
`
`Stevick, G.R., D. Rondinone, A. Sagle, J. Zicherman. “Fire Incidents and Explosions
`Involving Portable Plastic Gasoline Containers And Their Prevention.” Journal of
`Failure Analysis and Prevention (2011).
`
`Stevick, G.R., D. Rondinone, A. Sagle, J. Zicherman. “Portable Gasoline Container Explosions
`and Their Prevention.” Society of Forensic Engineers and Scientists Winter Seminar,
`19-21 March 2010.
`
`Rondinone, D., A. Sagle, G.R. Stevick. “API Aboveground Tank Leak Detection Liquid
`Level Measurement Technique Evaluation,” for The American Petroleum Institute,
`09 Nov. 2009.
`Berkeley Engineering And Research, Inc. · 808 Gilman Street, Berkeley, CA 94710
`www.bearinc.com · glen@bearinc.com · 510-549-3300x1
`
`IRONBURG EX2002, Page 3
`
`
`
`Curriculum Vitae
`___________________________________________________________________________
`
`Rondinone, D., G.R. Stevick. “Olympic Spirit Vapor Recovery System Fire Investigation and
`System Review,” for Tesoro Corporation, by Berkeley Engineering And Research,
`Inc.,18 May 2009.
`
`Stevick, G.R. “Marine Crude Oil Transfer Breakaway, Hawaii Single Point Mooring Terminal,”
`for Tesoro Corporation, by Berkeley Engineering And Research, Inc., 19 May 2008.
`
`Stevick, G., J. Hart, C. Lee, F. Dauby. “Fracture Analysis for Pipeline Girth Welds in High
`Strain Applications.” Pipeline and Gas Technology Jan. 2006.
`
`Stevick, G.R., et al. “Golden Gate Bridge, Phase II Seismic Retrofit, Calibration Testing of
`Pylons S1 and S2 - Fort Point Arch Longitudinal and Transverse Energy Dissipation
`Devices,” for The Golden Gate Bridge District, by Berkeley Engineering And
`Research, Inc., 01 July 2005. (Note: This project won the American Society of
`Civil Engineers 2007 Opal Award for the Most Outstanding Civil Engineering
`Achievement.)
`
`Berkeley Engineering And Research, Inc. “Rolling Mill Structure and Mandrel Finite
`Element Analysis,” for USS-POSCO Industries, 20 Aug. 2002.
`
`Berkeley Engineering And Research, Inc. “Effect of the Windshield on Roof Strength and
`Displacement,” for James Collins and Associates, 6 Oct. 2000.
`
`Warner, Paul, Glen Stevick, Thomas Eager. “Main Propulsion Unit, Aft Second Reduction
`Gear Bearing Failure Assessment,” for Northrup Grumman and the US Navy, 9 April
`1999.
`
`Maple, J.A. and Associates, SSD Engineering Consultants, Glen Stevick and Berkeley
`Engineering And Research, Inc. “Study of Effects of Vibrations Due to Pressure
`Pulses on the Integrity of the Trans-Alaska Pipeline,” for Alyeska Pipeline Service
`Company, 26 Jan. 1997.
`
`Berkeley Engineering And Research, Inc. “Computation of the Stresses in a Shaft Due to
`Torsion,” for EC Engine Components, Inc., 19 Aug. 1996.
`
`Berkeley Engineering And Research, Inc. “Excel Spreadsheet-Based Fitness For Service
`Model Providing Inspection Interval and Remaining Life of Coke Drums,” for
`Chevron Research & Technology Company, 12 Jan. 1996.
`
`Berkeley Engineering And Research, Inc. · 808 Gilman Street, Berkeley, CA 94710
`www.bearinc.com · glen@bearinc.com · 510-549-3300x1
`
`IRONBURG EX2002, Page 4
`
`
`
`Curriculum Vitae
`___________________________________________________________________________
`
`Berkeley Engineering And Research, Inc. "An Independent Review of Structural Methods
`Used to Evaluate the Integrity of the Trans-Alaska Pipeline," for Alyeska Pipeline
`Service Company, 1 July 1995.
`
`Berkeley Engineering And Research, Inc. “Coke Drum Material Crack Growth Tests,” for
`Chevron Research & Technology Company, 2 Aug. 1995.
`
`Berkeley Engineering And Research, Inc., SSD Engineering Consultants, Inc. "Fracture
`Evaluation of Fillet Welded Pipe Sleeves," for Alyeska Pipeline Service Company, 01
`July 1994.
`
`Stevick, G.R. "Failure of Welds at Elevated Temperatures," Welding Research Council
`Bulletin 390, Welding Research Council, April 1994.
`
`SSD Engineering Consultants, Inc., Berkeley Engineering And Research, Inc. "Structural
`Serviceability of the Salcha River Crossing," for Alyeska Pipeline Service Company,
`17 Nov. 1993.
`
`Stevick, G.R., B.R. Cuzzillo. "Batch-Reactor Heater-Coil Thermal & Fatigue Analysis," for
`Chevron Research and Technology Company, Inc., 25 Aug. 1993.
`
`Finnie, I., G.R. Stevick, J.R. Ridgley. "Influence of Impingement Angle on the Erosion of
`Ductile Materials." Wear 152 (1992): 91-98.
`
`Stevick, G.R. "Stress Analysis of Hospital Bed Frame Components," for American Life
`Support Technology, 01 July 1991.
`
`Stevick, G.R., I. Finnie. "Stress Concentrations Resulting from Longitudinal Butt-Welds in
`Piping at Elevated Temperatures." Creep in Structures. (Ed. M. Zyczkowski),
`
`Berlin: Springer-Verlag, 1991. 629-636.
`
`Stevick, G.R., I. Finnie. "Failure Assessment of Weldments at Elevated Temperatures."
`Mechanical Behavior of Materials-VI, Vol 2. Ed. M. Jono, T. Inoue. Oxford: Pergamon,
`1991. 149-154.
`
`Stevick, G.R. “Redesign of an 8000 psi Test Vessel Using Bolted Construction” (2 reports),
`for SAIC Rock Mechanics Laboratory, 5 Sept. 1990, 12 Dec. 1990.
`
`Berkeley Engineering And Research, Inc. · 808 Gilman Street, Berkeley, CA 94710
`www.bearinc.com · glen@bearinc.com · 510-549-3300x1
`
`IRONBURG EX2002, Page 5
`
`
`
`Curriculum Vitae
`___________________________________________________________________________
`
`Marsili, D., G.R. Stevick. "Ductile Fracture Protection of the Canyon Reef Carrier Natural
`Gas Pipeline," Proceedings of the 65th annual Society of Petroleum Engineering
`Conference, New Orleans, Louisiana, Sept. 1990.
`
`Stevick, G.R. "Structural Analysis of Fluidized Catalytic Cracking Unit Regenerator
`Internals,"for Chevron USA El Segundo Refinery, 22 June 1990.
`
`Stevick, G.R. "High Pressure Toxic Filter/Pressure Vessel Design," for Filterdyne Systems,
`Inc., 17 Jan. 1990.
`
`Stevick, G.R. "Whitney Canyon/Carter Creek, WY - Gathering System H2S Risk
`Assessment," for Chevron Engineering Technology Department, Nov. 1988.
`
`Stevick, G.R. "Crane Turrett Bolt Failure Analysis," for Dave's Mobile Crane Service, Los
`Altos, CA, June 1988.
`
`Stevick, G.R. "El Segundo, CA - Buckling Integrity of Column C-6 for Wind and Earthquake
`Loads," for Chevron Engineering Technology Department, June 1988.
`
`Stevick, G.R., B.G. Burke. "An Experimental Assessment of The Damping Provided By
`Chain Dampers on a Tall, Slender Stack," Proceedings of the International Chimney
`Conference, London, England. April 1988.
`
`Stevick, G.R., W.A. Ebert. "Recommended Practice, RP-33, Vibration Guidelines," for
`Chevron Engineering Technology Department, Dec. 1987.
`
`Stevick, G.R. “Diffusion of Gasoline Vapors Within the Annulus of Double-Wall
`Underground Storage Tanks,” for Chevron Engineering Department, Nov. 1987.
`
`
`
`Stevick, G.R. "Gaviota, CA - Onshore Pipelines Weld Flaw Acceptance Criteria," for,
`Chevron Engineering Technology Department, June 1987.
`
`Stevick, G.R. "DNL Construction Crane Failure," for George Ashford & Associates,
`Honolulu,Hawaii, May 1987.
`
`Stevick, G.R. "Fiberglass Underground Storage Tank Design Methodology for External
`Loads," for Chevron Engineering Department, Nov. 1986.
`
`Berkeley Engineering And Research, Inc. · 808 Gilman Street, Berkeley, CA 94710
`www.bearinc.com · glen@bearinc.com · 510-549-3300x1
`
`IRONBURG EX2002, Page 6
`
`
`
`Curriculum Vitae
`___________________________________________________________________________
`
`Stevick, G.R., W.A. Ebert. "El Paso, TX - Failure Analysis and Design of a New FCCU Flue
`Gas Cooler," for Chevron Engineering Department, May 1986.
`
`Stevick, G.R. "Richmond, CA - Isomax Plant Compressor Valve Failure and Redesign, K-
`950, K-960,"for Chevron Engineering Department, April 1986.
`
`Stevick, G.R., S. Soemantri, I. Finnie. "An Analysis of the Loaded Abrasive Column type
`Wear Tester." Wear 101 (1985): 77- 80.
`
`Stevick, G.R. “Heber – Geothermal Pump Seals,” for Chevron Engineering Department,
`Jan. 1985.
`
`Stevick, G.R. "Gaviota, CA - Fatigue Analysis and Redesign of the 40.5 inch Diameter Gas
`Compressor Pistons," for Chevron Engineering Department, Jan. 1985.
`
`Stevick, G.R. “Vapor Recovery Piping – Taft Sec. 36B,” for Chevron Engineering
`Department, Aug. 1984.
`
`Stevick, G.R., B.G. Burke. "Tension Leg Platform Production Riser Crack Growth Analysis,"
`for Chevron Engineering Department, May 1984.
`
`Stevick, G.R. “Platform Grace Gas Pipeline – Ductile Fracture,” for Chevron Engineering
`Department, 2 April 1984.
`
`Stevick, G.R. “20 inch Casing Connector Fatigue Life Evaluation for the Manteo Block,” for
`Chevron Engineering Department, April 1984.
`
`Stevick, G.R. “Platform Hidalgo Gas Pipeline – Ductile Fracture,” for Chevron Engineering
`Department, March 1984.
`
`Cheng, W., I. Finnie, G.R. Stevick. "Prediction of Stress Intensity Factor for an Internal
`Circumferential Crack at a Butt-Weld Between Cylinders Using the Plane Strain
`Solution." Journal of Engineering Materials and Technology 106 (1984): 21-24.
`
`Berkeley Engineering And Research, Inc. · 808 Gilman Street, Berkeley, CA 94710
`www.bearinc.com · glen@bearinc.com · 510-549-3300x1
`
`IRONBURG EX2002, Page 7
`
`