For more information and technical
`assistance contact:
`
`Chevron Phillips Chemical Company LP
`P.O. Box 4910
`The Woodlands, TX 77387-4910
`800.231.1212
`
`haht.product_family: HDPE, haht.material_numbers: , haht.trade_name: EHM 6007, haht.conversion_process: Blow Molding; ; , haht.product_name: Polyethylene,
`haht.content_type: TDS, cpchem.advancedSearch.section: =strFinalString%>
`
`PREMIUM EXTRUSION AND RIGID PACKAGING RESINS
`
`Marlex EHM 6007
`®
`
`HIGH DENSITY POLYETHYLENE
`
`This high molecular weight ethylene homopolymer is tailored
`for lightweight blow molded containers that require:
`Excellent stiffness
`Low taste and low aroma transfer
`
`Typical blow molded applications for EHM 6007 include:
`Dairy bottles
`Liquid food packaging
`
`This resin meets these specifications:
`ASTM D4976 - PE 244
`FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per
`21 CFR 176.170(c)
`Listed in the Drug Master File
`
`(1)
`NOMINAL PHYSICAL PROPERTIES
`
`SI
`English
`0.964 g/cm
`---
`Density
`ASTM D1505
`Melt Index,
`0.70 g/10 min
`---
`ASTM D1238
`190/2.16
`Tensile Strength at Yield,
`30 MPa
`4,400 psi
`ASTM D638
`2 in/min, Type IV bar
`Elongation at Break,
`>300%
`>300%
`ASTM D638
`2 in/min, Type IV bar
`Flexural Modulus,
`1,650 MPa
`240,000 psi
`ASTM D790
`Tangent - 16:1 span:depth, 0.5 in/min
`ESCR,
`15 h
`15 h
`ASTM D1693
`Condition A (100% Igepal), F 50
`Brittleness Temperature,
`<-75°C
`<-103°F
`ASTM D746
`Type A, Type I specimen
`1. The nominal properties reported herein are typical of the product, but do not reflect normal testing variance and therefore should not be used for specification
`purposes. Values are rounded. The physical properties were determined on compression molded specimens that were prepared in accordance with
`Procedure C of ASTM D4703, Annex A1.
`
`Method
`
`3
`
`MSDS #240370
`
`Revision Date January, 2005
`
`Before using this product, the user is advised and cautioned to make its own determination and assessment of the safety and
`suitability of the product for the specific use in question and is further advised against relying on the information contained herein as
`it may relate to any specific use or application. It is the ultimate responsibility of the user to ensure that the product is suited and the
`information is applicable to the user's specific application. Chevron Phillips Chemical Company LP does not make, and expressly
`disclaims, all warranties, including warranties of merchantability or fitness for a particular purpose, regardless of whether oral or
`written, express or implied, or allegedly arising from any usage of any trade or from any course of dealing in connection with the use
`of the information contained herein or the product itself. The user expressly assumes all risk and liability, whether based in contract,
`tort or otherwise, in connection with the use of the information contained herein or the product itself. Further, information contained
`herein is given without reference to any intellectual property issues, as well as federal, state or local laws which may be encountered
`in the use thereof. Such questions should be investigated by the user.
`
`