`
`IPR2018-00042
`
`Dynacraft BSC,Inc.
`Exhibit 1011
`
`
`
`ey
`
`Dynacraft v. Mattel
`
`
`
`
`
`Distributors for North, Central, and South America:
`Kluwer Academic Publishers ©
`.
`101 Philip Drive
`:
`Assinippi Park
`Norwell, Massachusetts, 02061 USA
`Telephone (781) 871-6600
`Fax (781) 871-6528
`E-mail <kluwer@wkap.com>
`
`Distributors for all other countries:
`Kluwer Academic Publishers Group
`Distribution Centre
`Post Office Box 322
`
`3300 AH Dordrecht, THE NETHERGANDS
`Telephone 31 78 6392 392
`Fax 31 78 6546 474
`E-mail <orderdept@wkap.nl>
`LY Electronic Services <http://www.wkap.nl>
`
`
`
`Library of Congress Cataloging-in-Publication Data
`
`Rosato, Donald V.
`Concise encyclopediaofplastics / Donald V. Rosato, Marlene G.
`Rosato, Dominick V. Rosato
`.
`cm,
`
`Includes bibliographical references and index.
`ISBN 0-7923-8496-2 (acid-free paper)
`1. Plastics Encyclopedias.
`I. Rosato, M. G.
`Dominick V.
`III. Title.
`TP1110.R66
`1999
`668.4’03—dc21
`
`II. Rosato,
`
`Copyright © 2000 by Kluwer Academic Publishers.
`
`All rights reserved. No part of this publication may be reproduced, stored in a
`retrieval system, or transmitted in any form or by any means, mechanical,
`photocopying,recording, or otherwise, withoutthe prior written permission ofthe
`publisher, Kluwer Academic Publishers, 101 Philip Drive, Assinippi Park, Norwell,
`Massachusetts 02061.
`
`Printed on acid-free paper.
`
`Printed in the United States of America.
`
`
`
` 364
`
`Concise Encyclopedia of Plastics
`
`evenly, and the ability to endure sustained production
`withoutconstant maintenance. Using low-cost material to
`meet high performance requirements will compromise
`mold integrity. For example, for more than 90% ofthe
`molds, the cost of the cavity and core materials is less than
`5% ofthe total mold cost. See cost, product; mold cost.
`mold cavity, debossed. Depressed or indented let-
`tering or designs in the cavity that produce bossed impres-
`sions on the molded part. See decorating, fill-and-
`wipe.
`mold-cavity deposit A plastic build-up on a cavity’s
`surface that is due to plate out of the plastic and usually is
`attributed to the use of certain additives.
`mold-cavity draft On most molded parts, features
`mustbe cutinto the surface of the mold perpendicular to
`the moldingpartingline. To properly release the part from
`the tool, parts almost alwaysincludea taper. The amount
`of mold draft required will depend onfactors such as type
`ofplastic being processed, processing conditions, and sur-
`face finish. For example, a highly polished surface will re-
`quire less than an unpolished mold. Any surface texture
`will increase the draft at least 1° per side for every 0,001
`in. (0.003 cm) depth oftexture. Special mold-cavity sur-
`face action can be used. Elastomeric material has a rubbery
`condition and maynotrequire the draft for ejection. Also
`called draft in the direction of the mold. See mold-parting
`line; mold release agent.
`mold cavity, duplicate-plate A removable plate that
`retains cavities and is used where a two-plate operation is
`necessary for loadinginserts.
`mold cavity, etched A surface that is treated with an
`acid, leaving relief to form the desired design texture on
`the moldedpart. See chemical etching; photoetching
`tool; surface treatment; texturizing.
`mold-cavity ejector Various mechanical means that
`are used to eject or remove the molded part from the
`cavity.
`Theindentedhalf of a mold that
`mold cavity, female
`is designed to receive the male half. See mold cavity,
`male.
`mold-cavity fill and pack See injection molding,
`boost cut-off or two-stage control.
`mold-cavity filling See mold-filling monitoring.
`mold-cavity finish, SPI/SPE Mold Standard See
`surface finish.
`to
`Plastic melt begins
`frozen-layer
`mold cavity,
`“freeze” (solidify) as it fills an injection-molding mold
`cavity. Thefrozen layer can easily vary in thickness as the
`moldfills, producing differentfrictional shear forces. As a
`result, flow (filling) and solidification (thermoplastic cool-
`ing) should be evaluated together. See freeze-off.
`mold-cavity grit blasting Blowing steel grit or sand
`onto the cavity wall to produce a roughsurface. This sur-
`face treatment may be required to permit air to leave the
`mold during moldingor to provide a desired surface finish
`on thepart. See cleaning, abrasion.
`mold-cavity hobbing Forming single or multiple
`
`moldcavities by forcing a hob intoa relatively s
`blank. Hobbingis a technique where a master n
`hardenedsteel is used to sink the shape ofthe cay
`a heated mild steel, such as beryllium copper. Th
`larger than thefinished plastic molded part becai
`hobbing, the metal shrinks during cooling. See ¢
`erosive cutting and sinking.
`mold-cavity honing Using a fine-grained wl
`or equivalent to obtain precise accuracy of the
`finish.
`mold cavity, injection The two halves oftk
`have a flat parting line. When the two halves me
`halfis literally making contact by one flat surface
`anotherflat surface. Pressure on the injected mel
`cavity is through theplasticator’s pressure-ram ac
`the melt. See clamping; mold cavity, compr
`molding pressure required.
`mold-cavity land Thelengthin thedifferentg;
`figurations that influence melt flow.
`mold cavity, male The extended half of am
`is designed to match the female half. Also called
`See mold-cavity filling.
`mold-cavity melt-flow analysis A compre
`understanding of the moldfilling process, Detaile
`mation is generated concerning the influence oi
`filling conditions on the distribution flow patter
`vectors, shear stresses, frozen skin, temperatures, ar
`sures. From these data, conclusions regarding e.
`tolerances as well as part quality strength, appearar
`weld line can be drawn. Thelikelihood of warpi
`face, blemishes, and strength reductions due to hig
`stress can be anticipated. Onthis analysis, the best a:
`practical mold-filling conditions can beselected. Si
`model; injection-molding melt flow; injection
`ing process-control parameter; melt-flow a1
`processing fundamental; temperature transiti
`mold-cavity melt fountain flow The melt
`that enters the cavity (injection molding) by for
`fountain (balloon) stretching effect. The stretchin
`front-oriented outer surface covers the inside wal
`cavity. Melt that follows basically fills in the founta:
`Theresult is a nonuniform orientation in the cross-
`ofthe molded part; however,partscan still meet part
`mance requirements. The degree ofballooning or
`formation is controllable so that specific desired pri
`can be obtained. See injection-molding melt fic
`mold-cavity packing See cushion; mold
`monitoring; packing factor.
`mold-cavity plating See mold-cavity coatir
`mold-cavity pressure The cavity pressure can
`corded via a transducer such as one beinglocatec
`cavity near the gate. It can plot a profile that record:
`ent information suchasfilling, packing, and holdir
`sures. See injection molding mold-cavity pri
`injection molding, programmed; molding pri
`required.
`mold-cavity register An angle face on the mc
`
`