`
`6470399 | wentl
`
`
`
`
`
`ISSUECLASSIFICATIONL.
`
`3a
`
`gB C
`
`lass
`
`U.S. UTILITY PATENT APPLICATION
`OCT 2 2 2002
`MaSCANNEDCCZ
`LD
`SUBCLASS
`
`O.1.P.E.
`
`PATENT DATE.
`
`|secron [cLass —
`
`ART UNIT
`
`EXAMINER |
`
`[_]FICHE
`FILED WITH: [_] DISK (CRF)
`{Attachedin pocket onright inside flap)
`
`
`
`PREPARED AND APPROVED FORISSUE
`ISSUING CLASSIFICATION
`i“€ross REFERENCE(S)
`
`ORIGINAL
`
`C1 continued on Issue Slip Inside File Jacket
`
`aN
`
`
`
`ee
`
`DISCLAIMER
`
`C1 a) The term of this patent
`subsequentto
`has been disclaimed.
`
`C1 b)The term of this patent/Shall
`not extend beyond the onpupion date,
`of U.S Patent. No.
`
`.
`
`months of
`1 C] c) The terminal
`this patent have been disclaimed.
`
`(Assistant Examiner)
`
`THOMAS LEE
`SUPERVISORY PATENT: EXAMINER
`ECHNOLOGYnen mo
` {Primary——
`
`Amount Due
`‘BI280”
`
`Date Paid
`
`Silomcre
`ISSUE BATCH NUMBER
`
`WARNING:
`
`The information disclosed herein may be restricted. Unauthorized disclosure@ may be prohibited by the United States CodeTitle 35, Sections 122, 181 and 368.
`Possession outside the U.S. Patent & Trademark Office is restricted: to'at
`Form PTO-436A
`(Rev. 6/98)
`~*~
`
`
`
`(LABEL AREA)
`
`
`
`(FACE)
`
`OLYMPUS EX.1002 - 1/317
`
`HUAWEI EX. 1002 - 1/317
`
`OLYMPUS EX. 1002 - 1/317
`
`
`
`
`
`
`
`PATENT APPLICATION SERIAL NO. Of 33/002 _
`
`U.S. DEPARTMENT. OF COMMERCE
`PATENT AND TRADEMARK OFFICE
`FEE RECORD SHEET
`
`06/18/1999 WCLAYBRO O0000005 09381002 ©
`O1 FC2971
`"420.00 OF
`
`OLYMPUS EX.1002 - 2/317
`
`HUAWEI EX. 1002 - 2/317
`
`OLYMPUS EX. 1002 - 2/317
`
`
`
`
`
`
`
`“SETAC NUMBER
`
`09/331, 003
`
`2085/1014
`
`z MICHAEL TASLER, WUR@BURG, Pip RED GRRMANY.
`
`fasa.
`2
`
`
`
`
`VA
`
`*ACONTINUING DOMESTIC DATAX HA take RAHA tee
`VERIFIED
`oo
`DS
`pe
`*4371 (NAT'L STAGE) DAPARERRekaiotans ite
`VERIFIED
`THIS APPLN tS A 371 oF
` fper/EP98/01187
`
`03/03/98
`
`19708755.8
`
`03/04/97
`
`
`
`«| Veritied and Acknowledged: >...
`Exaininor stnitiols
`
`,
`
`nw
`ittale:
`
`DEX
`
`
`
`“ eEPORBIGN APPLTCATIONS #4444 4 Ha dota
`VERIFIED
`FED REP GERMANY ©
`a:
`Ms wp
`
`
`
`IF RUQUIRED, FoRMICN FILING LicRNH GRANTED. 07/27/99 ** SMALL ENTITY 4+
`Foreign,Frlont claimed
`STATEOF BAAé
`NBEP
`
`35U
`(8-d) conditions met Byes BhEine Liat after Allowance
`
`.
`ie
`
`ADORESS
`
`i Pee vilee
`
`On.
`
`SOOLT
`
`PHON®:
`
`(303)449-9497
`
`| FILING REE =
`
`RECEIVED
`
`afees (Filing)
`FEES: Authotityhas been given in Papér-
`1.17 Fees (Procéssing Ext. off tne)
`No.
`to ohetgesorea DEPOSITACCOUNT
`$420
`' 1.48 Féés(Issue)
`| NO. for the following:
`:
`;
`(lL) Other
`CT Credit=tst~CS~S
`
`OLYMPUSEX. 1002 _ 3/317
`
`HUAWEI EX. 1002 - 3/317
`
`OLYMPUS EX. 1002 - 3/317
`
`
`
`Waw.uspio.gov
`
`
`
`
`
`COMMISSIONERFOR PATENTS
`UNITED STATES PATENT AND TRADEMARK:OFFICE
`WASHINGTON, D.C, 20231
`
`CONFIRMATION.NG.1117
`*BIRBDATASHEET*
`
`Bib Data Sheet
`. n
`
`
`
`
`FILING DATE
`
`
`
`ATTORNEY:
`‘| GROUP ART UNIT
`06/14/1999
`
`
`DOCKET NO.
`
`
`2055/101
`
`SERIAL NUMBER
`09/331,002
`
`
`
`.
`
`
`APPLICANTS
`
`MICHAEL TASLER, WURZBURG;.GERMANY;
`
`
`
`* CONTINUING DATA REKRERERRERNRRERERRRRENE
`:
`
`THISAPPLICATIONISA371 OF PCT/EP98/0118703/03/1998 res
`TH
`
`
`7
`ek FOREIGN APPLICATIONS.HRREREAAREAERERERERE
`.
`,
`yf
`jay. (GERMANY 19708755.8 03/04/1997
`| pad
`mo
`
`
`
`Foreign
`Priority
`claimed |
`a
`3
`:
`
`
`
`
`ESUSC 19(0)condiions STATEOR|SHEETS|TOTALqn gy
`
`
`et yesbdno!Metafter Allowance}: *
`
`
`
`
`
`
`
`erified and
`| a
`“CQUNTRY | DRAWING’
`| CLAIMS
`
`w,
`
`LC!
`ITLE
`-(\_ FLEXIBLEJNTEREACE
`
`wo | FILING FEE |FEES:Authority has been givenin1 Paper
`
`
`to charge/credit DEPOSIT ACCOUNT
`No.
`
`RECEIVED jNo.
`__
`forfollowing:
`420
`
`
`
`bewtinne wih...
`
`
`
`OLYMPUS EX.1002 - 4/317
`
`HUAWEI EX. 1002 - 4/317
`
`OLYMPUS EX. 1002 - 4/317
`
`
`
`
`
` http://iieo:8000/preexanyJavaProxy/jsp/bibdata/transform.)
`
`os eeeieaNSuCSEG
`
`2 6f2
`
`5/22/02 11:29 AM ,
`
`
`
`OLYMPUS EX.1002 - 5/317
`
`HUAWEI EX. 1002 - 5/317
`
`OLYMPUS EX. 1002 - 5/317
`
`
`
`
`
`f
`
`Unrrep States PATENT AND TRADEMARKC OFFICE _| .
`
`
`_
`~ SOMMISSIONER FOR PATENTS
`UNITED STares PATENT ANO TRADEMARK OFFICE
`WASHINOTON, D.C, 20231
`www.uspto.gov
`
`
`
`http://ne0:8000/preexam/J:avdProxy/jsp/bibdata/transfortn.jap
`
`|
`
`
`
`-
`
`conrRomion no. tt
`
`THENWOON
`
`Bib Data Sheet
`
`—~
`
`
`
`
`SERIAL NUMBER | 06/14/1999
`09/331,002.
`|
`7
`
`.
`
`FILING DATE
`
`:
`
`;
`
`RULE
`
`
`
`|
`
`CLASS
`| GROUP ART UNIT |
`|
`o18s
`“40
`
`1
`.
`
`|
`
`ATTORNEY
`DOCKET NO,
`3055/101
`
`APPLICANTS
`
`MICHAEL TASLER, WURZBURG, GERMANY;
`.
`
`ae CONTINUING DATA {annIndeinneleeniiteir
`{THIS APPLICATION IS A 371 OF PCT/EP98/01187 03/03/1998
`
`me FOREIGN APPLICATIONS Jann
`|GERMANY 19708755,.8 03/04/1997
`
`
`poy.
`
`| STATE OR,|
`
`JADDRESS
`24283
`PATTON BOGGS
`PO BOX 270930
`LOUISVILLE:, CO
`3
`
`
`
`420}
`
`INTERFACE FOR COMMUNICATION BETWEEN A HOSTAND AN ANALOG 1/0 DEVICE
`
`
`THETYPE.OFTHE
`
`V/O DEVICE
`
`Ri
`
`All Fees
`
`FILING FEE FEES: Authority has been given in Paper
`No.
`;
`to charge/credit DEPOSIT ACCOUNT
`RECEIVED INo. ______ for following:
`
`+ike
`
`5/22/02 11:29 AM
`
`
`
`
`OLYMPUS EX.1002 - 6/317
`
`HUAWEI EX. 1002 - 6/317
`
`OLYMPUS EX. 1002 - 6/317
`
`
`
`
`
`a“
`a
`-_
`a ¢ ee oo
`4igRecdPPTO 14 JUN 99
`
`PATENT
`:
`|
`:
`Practitioner'sDocketNo. 2055/101.
`IN THE UNITED STATES PATENT AND TRADEMARK OFFICE
`In re application of:
`Tasler, Michael
`ApplicationNo.:
`AppliedFor
`Filed:
`Herewith
`‘For:
`FLEXIBLE INTERFACE
`
`Group No.:
`Examiner:
`
`Unknown
`Unknown.
`
`.
`
`-
`Attention: EO/US .
`Box PCT
`Assistant Commissioner for Patents’
`Washington, DC 20231
`
`|
`
`EXPRESS MAIL CERTIFICATE
`
`“Express Mail" Label Number: EL304928607US
`Date of Deposit:
`06/14/99.
`I hereby state that the following attached papersor fee:
`1.
`Check No, 5994 in the amount of $420.00
`9.
`.
`‘Transmittal Letter to.the United States Elected Office (EO/US) (Entryinto U.S. National Phase
`- Under Chapter IEG pages)
`3.
`Copy ofGerman Application filed with thePCT (36 pages)
`4.
`Translation ofPCT Application PCT/EP98/01187 as originally filed (26 pages)
`5.
`Copy ofthe PER (6 pages)
`]
`.
`6.
`FirstPreliminary Amendmentand Remarks (2 pages) .
`7,
` . FinalversionofPCT/EP98/01187 fortheprosecutionattheUSPTOtobefiledasfirstpreliminary
`amendment (28 pages)
`8.
`Declaration and Power ofAttorney For Patent Application (28 pages)
`9.
`Verified Statement (Declaration) Claiming Small Entity Status - IndependentInventor(1 page)
`10.
`Copy ofInterhational Search Report (7 pages)
`i.
`IDS Transmittal (1 page)
`42,
`IDS Form PTO/SB/08A and 08B (2 pages)
`“«, Concise explanation ofdocuments citedin examinationproceedings ofcorresponding foreign and
`— io
`international applications (4 pages)
`IDS References(7 for a total of 92 pages)
`14.
`arebeing depositedwiththeUnited States Postal Service "ExpressMail Post Officeto Addressee" service
`under 37 CFR 1.10, onthe date indicatedabove andis addressedtoAttention: EO/US,BoxPCT, Assistant
`Commissioner for Patents, Washington, DC 20231.
`Elaine C. VonSpreckelsen
`
`.
`
`bees
`
`
`C. Yo
`
`
`person mailitig papers or fee
`Signature of
`
`
`
`(Express Mail Certificate—page | of 1)
`
`OLYMPUS EX.1002 - 7/317
`
`HUAWEI EX. 1002 - 7/317
`
`OLYMPUS EX. 1002 - 7/317
`
`
`
`
`
`Practitioner’s.Docket No.._ 3/101 -
`
`1gReco.
`
`7PTO.
`
`1.4 JUN 1899
`
`CHAPTER I
`
`TRANSMITTALLETTER |
`
`0 9/ 3 3 10 02 -
`
`TO THE UNITED STATES ELECTED OFFICE (EO/US)
`
`(ENTRY INTO U.S. NATIONAL PHASE UNDER CHAPTERII)
`
`
`
`PCT/EP98/01187
`
`International Application Number
`
`
`
`-
`
`03 March 1998 (3.03.98)
`
`=
`
`
`
`
`
`04 March 1997 (4.03.97)
`
`a
`.
`
`
`
`
`
`
`TITLE OF INVENTION:
`APPLICANT(S): -
`
`FLEXIBLE INTERFACE
`Tasler, Michael
`
`Attention; EO/US
`Box PCT
`Assistant Commissioner for Patents
`Washington DC 20231
`1.
`Applicant herewith submits to the United States Elected Office (EO/US)the following items under
`35 U.S.C. §371: -
`Zo
`a.
`This express request to immediately begin national examination procedures (35 U.S.C.
`§371@)).
`
`b.
`
`The U.S. National Fee (35 U.S.C. §371(c)(1)) and other fees (37 C.F.R. §1.492) as-indicated
`below:
`
`CERTIFICATION UNDER37 C.E.R. 1.10*
`(Express Mail label. number is mandatory.)
`(Express Mail certification is optional.)
`Thereby certify that this correspondence and the documentsreferred to as. attached therein are being deposited withthe United
`, in an envelope as “Express Mail Post Office to
`cat 14, £993
`States Postal Service on this date
`Addressee,” Mailing Label NumberEL304928607US,addressed to Attention: EO/US, Box PCT, Assistant Commissiongefor
`Patents, Washington, D.C. 20231.
`a
`e
`
`eGHTSGBOOTEERO
`
`. Elaine. C; VonSpreckelsen
`(type or print name ofperson mailingpaper)
`.
`. a
`.
`Okan
`[Oo
`_ Signature of person mailing paper
`
`-
`
`.
`
`WARNING:
`
`-
`
`Certificate ofmailing. (first class) orfacsimile transmission procedures of37 C.F.R. 1.8 cannot be used to
`obtain a date ofmailing or transmissionfor this correspondence.
`
`'
`
`«WARNING:
`
`Each paperorfeefiled by “Express Mail” must-have the number ofthe “Express Mail” mailing label
`placed thereon prior to mailing. 37 C.F.R. 1.10(b).
`“Since the filing ofcorrespondence under .§1.10 without.the Express Mail mailing label thereon is an -
`oversight that can be avoided by theexercise ofreasonable care, requestsfor waiver ofthis requirementwill
`. not be granied on petition.” Notice ofOct. 24, 1996, 60 Fed. Reg. 56,439, at 56,442.
`(Transmittal Letter to the United States Elected.Office (EO/US)—page.1 of3)
`
`
`
`OLYMPUS EX.1002 - 8/317
`
`HUAWEI EX. 1002 - 8/317
`
`OLYMPUS EX. 1002 - 8/317
`
`
`
`
`
`
`
`2.
`
`|
`
`Fees
`
`—
`
`~
`
`Toa!
`
`
` . (4) RATE
`(3) NUMBER |
`EXTRA
`
`$0.00
`
`.
`
`
`
` MULTIPLE DEPENDENT CLAIM(S)(if applicable) + $260.00 -
`
`
`
`
`
`
`BASIC FEE
`
`$840.00
`
`
`
`
`hGhTAI"SOOTEEGO
`
`
`
`' Total National Fee|$420.00;
`
`U.S. PTO WAS NOT INTERNATIONAL
`PRELIMINARY EXAMINATION AUTHORITY
`Where no international preliminary examination fee as set
`forth in §1.482 has been paid to the U.S. PTO, and
`paymentofan international search fee as set forth in
`
`
`§1.445(a)(2) to the U.S. PTO:
`
`
`where a search report on the international
`
`
`application has been prepared by the European
`
`
`Patent Office or the Japanese Patent’ Office (37
`
`CLF.R. §1.492(a)(5)) ovsesversersreees $840.00
`
`
`Total of above Calculations|= $840.00 oP
`
`Reduction by % for filing by small entity, ifapplicable. Affidavit
`| - $420.00
`
`must be filed. (note 37 CFR §§1.9, 1.27,-1.28)
`
`
`Subtotal|$420.00
`
`
`
`C.FR.§1.21(h)). Seeattached“ASSIGNMENTCOVERSHEET”. jse0°|
`Fee for recording the enclosed assignment document $40.00 (37
`
`
`
`
`
`
`
`
`$0;00
`
`
`
`Total Fees enclosed|$420.00
`
`
`*See attached Preliminary Amendment Reducingthe NumberofClaims.
`
`A checkin the amount of $420.00to coverthe above fees is enclosed.
`
`3. A.copyofthe International application as filed: (35 U.S.C. §371(c)(2)) is transmitted herewith.
`4, A translation of the International, application into the English language (35 U.S.C. §371(¢)(@)) is -
`
`transmitted herewith.
`
`5. Accopyofthe international examination report (PCT/IPEA/409)is transmitted herewith.
`
`6. There were no annex(es) to the international preliminary examination report.
`
`7, A translation ofthe annexestothe international preliminary examination report is not required as there.
`were no annexes,
`
`(Transmittal Letter tothe United States:Bléoted Office (EO/US)—page 2 of3):
`
`
`
`
`
`OLYMPUS EX.1002 - 9/317
`
`HUAWEI EX. 1002 - 9/317
`
`OLYMPUS EX. 1002 - 9/317
`
`
`
`
`
`
`
`Anoath or declaratic.__.d-tie inventor (35U.S.C. §371(c)(4)) cétfipsying with 35 U.S.C. Shsisis
`- submitted herewith, and‘such oathor declaration is attached to the application.
`
`. Other document(s).or information included:
`
`AnInternational SearchReport(PCTIISA/210) orDeclarationunderPCTArticle 17(2)(a)is.transmitted
`
`- herewith.
`
`¢
`
`SonTS"Baresed
`
`10.
`
`AnInformation Disclosure Statement under 37 C.F.R. §§1.97 and 1.98 is transmitted herewith. Also
`transmitted herewith are Forms PTO-1449 PTO/SB/08A and 08B, Explanation of documentscited in .
`the examination proceedings of corresponding foreign and international applications, and copies of
`citationslisted.
`
`11,
`
`Additional documents:,
`
`a. Preliminary amendment (37 C.F.R. §1.121)
`b. Verified Statement (Declaration) Claiming Small Entity Status
`c.. Express Mail Certificate
`d. Return Postcard
`
`12. The above itemsare’being transmitted before 30 months from any claimedpriority date.
`.- AUTHORIZATIONTO CHARGE ADDITIONAL FEES
`“TheCommissionerisherebyauthorizedtochargethefollowingadditionalfeesthatmayberequiredbythis
`paper and during the entire pendencyofthis application to Account No.: 04-1697
`37 CER. §1,492(a)(1), (2), (3), and (4) (filing fees)
`37 C.E.R. §1,.492(b), (c), and (d) (presentation of extra claims)
`37 C.F.R. §1.17 (application processing fees)
`37 C.F.R. §1.17(a)(1)-(5) (extension fees pursuant to 1.136(a))
`37 C.F.R. §1,492(e) and (£) (surcharge fees for filing the declaration and/or filing aian English
`translation of an International Application later than 30 monthsafter the priority date).
`
`
`
`.
`Tel. No.: (303) 449-9497
`Fax No.: (303) 449-0814
`
`
`
`Carl A. Forest
`Duft, Graziano & Forest, P.C.
`1790 - 30th Street, Suite 140
`- Boulder, CO 80301-1018 USA
`
`(Transmittal Letter to the United States Elected Office (EO/US)—page 3 of 3)
`
`OLYMPUS EX. 1002 - 10/317
`
`HUAWEI EX. 1002 - 10/317
`
`OLYMPUS EX. 1002 - 10/317
`
`
`
`
`
`QPRTS
`7
`
`:
`
`09/331002
`_
`910 Rocd PCTPTO 14 JUN'1999
`
`Flexible Interface—
`
`Description
`
`The present invention relates to the transfer of data and in particular to interface
`
`devices
`
`for communication between a computer or host device and a data
`
`transmit/receive device from which data is to be acquired or with which two-way
`communication is to take place.
`
`Existing data acquisition systems for computers are very limited in their areas of
`
`application. Generally such systemscan beclassified into two groups.
`
`In the first group host devices or computer systems are attached by means of an
`
`interface to a device whose data is to be acquired. The interfaces of this group are
`
`normally standard interfaces which, with specific driver software, can be used with a
`
`variety of host systems. An advantage of such interfaces is that they are largely
`independentof the host device. However, a disadvantage is that they generally require
`very sophisticated drivers which are prone to malfunction and which limit data
`transferrates between the device connected to the interface and the host device and
`
`vice versa. Further, it is often very difficult to implement such interfaces for portable
`systems and they offer few possibilities for adaptation with the result that such
`
`systemsoffer little flexibility.
`
`The devices from which data is to be acquired cover the entire electrical engineering
`spectrum. In a typical case,it is assumed that a customer who operates, for example,a
`diagnostic radiology system in a medical engineering environmentreports a fault. A
`field service technician of the system manufacturer visits the customer and reads
`system log files generated by the diagnostic radiology system by means a portable
`computer or laptop for example. If the fault cannot be localized or if the fault is
`intermittent, it will be necessary for the service technician to read not only an error
`log file but also data from current operation.It is apparent that in this case fast data
`
`transfer and rapid data analysis are necessary.
`
`OLYMPUS EX. 1002 - 11
`
`{
`
`[347
`
`HUAWEI EX. 1002 - 11/317
`
`OLYMPUS EX. 1002 - 11/317
`
`
`
`
`
`Another case requiring the use of an interface could be, for example, when an
`electronic measuring device, e.g. a multimeter, is attached to a computer system to
`transfer the data measured by the multimeter to the computer. Particularly when long-
`term measurements or large volumes of data are involved is it necessary for the
`interface to support a high data transfer rate.
`
`From these randomly chosen examples it can be seen that an interface may be put to
`totally different uses..It is therefore desirable that an interface be sufficiently flexible
`to permit attachment of very different electrical or electronic systems to a host device
`by meansofthe interface. To prevent operatorerror, it is also desirable that a service
`technician is not required to operate different interfaces in different ways for different
`applications but that, if possible, a universal method of operating the interface be
`provided for a large numberofapplications.
`
`To increase the data transfer rates across an interface, the route chosen in the second
`group of data acquisition systems for the interface devices was to specifically match
`the interface very closely to individual host systems or computer systems. The
`advantage of this solution is that high data transfer rates are possible. However, a
`disadvantage is that the drivers for the interfaces of the second group are very closely
`matched to a single host system with the result that they generally cannot be used with
`other host systems or their use is very ineffective. Further, such types of interface
`have the disadvantage that they must be installed inside the computer casing to
`achieve maximum data transfer rates as they access the internal host bus system. They
`are therefore generally not suitable for portable host systems in the form of laptops
`whose minimum possible size leaveslittle internal space to plug in an interface card.
`
`A solution to this problem is offered by the interface devices of IOtech (business
`address: 25971 Cannon Road, Cleveland, Ohio 44146, USA) which are suitable for
`laptops such as the WaveBook/512 (registered trademark). The interface devices are
`connected by means of a plug-in card, approximately the size of a credit card, to the
`PCMCTIA interface which is now a standard feature in laptops. The plug-in card
`converts the PCMCIAinterface into an interface known in the art as IEEE 1284. The
`~ said plug-in card provides a special printer interface which is enhanced as regards the
`data transfer rate and delivers a data transfer rate of approximately 2 MBps as
`
`OLYMPUS EX. 1002 - 12/317
`
`ue
`ia
`
`Ef
`
`e
`:
`a
`be
`-
`iG
`
`HUAWEI EX. 1002 - 12/317
`
`OLYMPUS EX. 1002 - 12/317
`
`
`
`
`
`compared with a rate of approx. 1 MBps for known printer interfaces. The known
`interface device generally consists of a driver component, a digital signal processor, a
`
`buffer and a hardware module which terminates in a connector to which the device
`
`whose data is to be acquired is attached. The driver componentis attached directly to
`
`the enhanced printer interface thus permitting the known interface device to establish
`a connection between a computer and the device whose data is to be acquired.
`
`In order to work withthe said interface, an interface-specific driver must be installed
`on the host device sothat the host device can communicate with the digital signal
`processorof the interface card. As described above, the driver mustbe installed on the
`
`host device. If the driver is a driver developed specifically for the host device, a high
`
`data transfer rate is achieved but the driver cannot be easily installed on a different
`
`host system. However,if the driver is a general driver which is as flexible as possible
`
`and which can be. used on many host devices, compromises must be accepted with.
`
`regard to the data transferrate.
`
`Particularly in an application for multi-tasking systems in which several different
`
`tasks such as data acquisition, data display and editing are to be performed quasi-
`
`simultaneously, each task is normally assigned a certain priority by the host system. A
`driver supporting a special task requests the central processing system of the host
`device for processor resources in order to perform its task. Depending on the
`particular priority assignment method and on the driver implementation, a particular
`share of processor resources is assigned to a special task in particular time slots.
`Conflicts arise if one or more drivers are implemented in such a way that they have
`the highestpriority by default, ie. they are incompatible, as happens in practice in
`many applications. It may occur that both drivers are set to highest priority which, in
`the worst case, can result in a system crash.
`
`EP 0685799 Al discloses an interface by means of which several peripheral devices
`can be attached to a bus. An interface is connected between the bus of a host device
`
`and various peripheral devices. The interface comprises a finite state machine and
`
`several branches each of which is assigned to a peripheral device. Each branch
`. comprisesa data manager, cycle control, user logic and a buffer. This known interface
`
`ee
`
`OLYMPUS EX.1002 - 13/317
`
`HUAWEI EX. 1002 - 13/317
`
`OLYMPUS EX. 1002 - 13/317
`
`
`
`Ry¥fe3.
`
`Sich?So"SOOree
`
`device provides optimal matching between a host device and a specific peripheral
`device.
`
`The specialist publication IBM Technical Disclosure Bulletin, Vol. 38, No. 05, page —
`245; "Communication Method between Devices through FDD Interface" discloses an
`interface which connects a host device to a peripheral device via a floppy disk drive
`
`interface. The interface consists in particular of an address generator, an MFM
`encoder/decoder,a serial/parallel adapter and a format signal generator. The interface
`makesit possible to attach not only a floppy disk drive but also a further peripheral
`device to the FDD host controller of a host device. The host device assumes that a
`
`floppy disk drive is always attached to its floppy disk drive controller and
`
`communicationis initiated if the address is correct. However, this document contains
`
`no information as to how communication should be possible if the interface is
`
`connected to a multi-purpose interface instead of to a floppy disk drive controller.
`
`invention to provide an interface device for
`the object of the present
`is
`It
`communication between a host device and a data transmit/receive device whose use is
`host device-independent and which delivers a high data transferrate.
`
`This object is achieved by an interface device according to claim 1 or 12 and by a
`method according to claim 15,
`
`The present invention is based on the finding that both a high data transfer rate and
`host device-independent use can be achieved if a driver for an input/output device
`customary in a host device, normally present in most commercially available host
`devices,is utilized. Drivers for input/output.devices customary in a host device which
`are found in practically all host devices are, for example, drivers for hard disks, for
`graphics devices or for printer devices. As however the hard disk interfaces in
`common host devices which can be, for example, IBM PCs, IBM-compatible PCs,
`Commodore PCs, Apple computers or even workstations, are the interfaces with the
`highest data transfer rate, the hard disk driver is utilized in the preferred embodiment
`of the interface device of the present invention. Drivers for other storage devices such
`as floppy disk drives, CD-ROM drives ortape drives could also be utilized in order to
`implementthe interface device according to the presentinvention.
`
`OLYMPUS EX. 1002 - 14/317
`
`HUAWEI EX. 1002 - 14/317
`
`OLYMPUS EX. 1002 - 14/317
`
`
`
`
`
`
`fe
`es
`
`Asdescribed in the following, the interface device according to the present invention
`is to be attached to a host device by means of a multi-purpose interface of the host
`device which can be implemented, for example, as an SCSI interface or as an
`enhanced printer interface. Multi-purpose interfaces comprise both an interface card
`and specific driver software for the interface card. The driver software can be
`designed so that it can replace the BIOS driver routines. Communication between the
`host device and the devices attached to the multi-purpose interface then essentially
`takes place by meansofthe specific driver software for the multi-purpose interface
`and. no longer primarily by means of BIOS routines of the host device. Recently
`however drivers for multi-purpose interfaces can also already be integrated in the
`BIOS system of the host device as, alongside classical input/output interfaces, multi-
`purpose interfaces are becoming increasingly commonin host devices. It is of course
`also possible to use BIOSroutines in parallel with the specific driver software for the
`multi-purpose interface,if this is desired.
`
`The interface device according to the present invention comprises a processor means,
`a memory means, a first connecting device for interfacing the host device with the
`interface device, and a second connecting device for interfacing the interface device
`with the data transmit/receive device. The interface device is configured by the
`processor means and the memory meansin such a way that the interface device, when
`receiving an inquiry from the host device via the first connecting device as to the type
`of a device attached to the host device, sends a signal, regardless of the type of the
`data transmit/receive device,
`to the host device via the first connecting device which
`signals to the host device thatit is communicating with an input/output device. The
`interface device according to the present invention therefore simulates, both in terms
`of hardware and software, the way in which a conventional input/output device
`functions, preferably that of a hard disk drive. As support
`for hard disks is
`implemented as standard inall commercially available host systems, the simulation of
`a hard disk, for example, can provide host device-independent use. The interface
`device according to the present invention therefore no longer communicates with the
`host device or computer by means of a specially designed driver but by means of a
`program which is present in the BIOS system (Basic Input/Output System) and is
`normally precisely matched to the specific computer system on which it is installed,
`
`ivi, dad eae
`OLYMPUSEX.1002 - 1 5/317
`
`HUAWEI EX. 1002 - 15/317
`
`OLYMPUS EX. 1002 - 15/317
`
`
`
`
`
`1myees
`
`it
`
`Poa
`
`or by meansof a specific program for the multi-purpose interface. Consequently, the
`interface device according to the present invention combines the advantages of both
`
`groups. On the one hand, communication between the computer and the interface
`takes place by means of a host device-specific BIOS program or by means of a driver
`program whichis matched to the multi-purpose interface and which could be regarded
`
`the BIOS program or a
`as a "“device-specific driver". On the other hand,
`corresponding multi-purpose. interface program which operates one of the common
`input/output interfaces in host systems is therefore present in all host systems so that
`
`the interface device according to the present invention is host device-independent.
`
`In the following, preferred embodiments of the present invention will be explained in
`
`more detail with reference to the drawings enclosed, in which:
`
`Fig. 1
`
`showsa general block diagram of the interface device according to the
`present invention; and
`
`Fig. 2 showsa detailed block diagram of an interface device according to a preferred
`embodimentofthe presentinvention.
`
`Fig.
`
`1 shows a general block diagram of an interface device 10 according to the
`
`present invention. A first connecting device 12 of the interface device 10 can be
`
`attached to a host device (not shown) via a host line 11. The first connecting device is
`
`attached both to a digital signal processor 13 and to a memory means 14. The digital
`
`signal processor 13 and the memory means 14 are also attached to a second
`
`connecting device 15 by means of bi-directional communication lines (shown for all
`
`lines by means of two directional arrows). The second connecting device can be
`
`attached by means of an output line 16 to a data transmit/receive device which is to
`
`receive data from the host device or from which data is to be read, ie. acquired, and
`transferred to the host device. The data transmit/receive device itself can also
`communicate actively with the host device via the first and second connecting device,
`as described in more detail in the following.
`
`. Communication between the host system or host device and the interface device is
`
`based on known standard access commands as supported by all known operating
`
`OLYMPUS EX. 1002 - 16/317
`
`HUAWEI EX. 1002 - 16/317
`
`OLYMPUS EX. 1002 - 16/317
`
`
`
`[OSESSara
`
`systems (e.g. DOS, Windows, Unix). Preferably, the interface device according to the
`
`present
`
`invention simulates a hard disk with a root directory whose entries are
`
`"virtual" files which can be created for the most varied functions. When the host
`
`device system with which the interface device according to the present invention is
`
`connected is booted and a data transmit/receive device is also attached to the interface
`device 10, usual BIOS routines or multi-purpose interface programs issue an
`instruction, known by those skilled in the art as the INQUIRY instruction, to the
`
`input/output interfaces in the host device. The digital signal processor 13 receives this
`
`inquiry instruction via the first connecting device and generates a signal which is sent
`to the host device (not shown) again via the first connecting device 12 and the host
`line 11. This signal indicates to the host device that, for example, a hard disk drive is
`attached at the interface to which theINQUIRYinstruction was sent. Optionally, the
`host device can send an instruction, known by those skilled in the art as "Test Unit
`
`Ready", to the interface device to request more precise details regarding the queried
`
`device.
`
`Regardless of which datatransmit/receive, device at the output line 16 is attached to
`the second connecting device, the digital signal processor 13 informs the host device
`
`that it
`
`is communicating with a hard disk drive. If the host device receives the
`
`responsethat a drive is present, it then sends a request to the interface device 10 to
`
`read the boot sequence which, on actual hard disks, normally resides on the first
`
`sectors of the disk. The digital signal processor 13, whose operating system in stored
`
`in the memory means 14, respondsto this instruction by sending to the host device a
`
`virtual boot sequence which, in the case of actual drives, includes the drive type, the
`
`Starting position and the length of the file allocation table (FAT), the number of
`sectors, etc., known to those skilled in the art. Once the host device has received this
`data, it assumes that the interface device 10 according to a preferred embodiment of
`
`the present invention is a hard disk drive. In reply to an instruction from the host
`
`device to display the directory of the "virtual" hard disk drive simulated by the
`interface device 10 with respect to the host device, the digital signal processor can
`
`respondto the host device in exactly the same way as a conventional hard disk would,
`
`namely by reading on requestthe file allocation table or FAT on a sector specified in
`"the boot sequence, normally the first writable sector, and transferring it to the host
`
`device, and subsequently by transferring the directory structure of the virtual hard
`
`OLYMPUS EX. 1002 - 17/317
`
`HUAWEI EX. 1002 - 17/317
`
`OLYMPUS EX. 1002 - 17/317
`
`
`
`aidaf,we
`
`rao"SOQTEES
`
`>
`
`disk. Further, it is possible that the FAT is not read until immediately prior to reading
`or storing the data of the "virtual" hard disk and not already atinitialization.
`
`In a preferred embodiment of the present invention, the digital signal processor 13,
`which need not necessarily be implemented as a digital signal processor but may be
`any other kind of microprocessor, comprises a first and a second command
`interpreter. The first commandinterpreter carries out the steps described above whilst
`the second command interpreter carries out the read/write assignment to specific
`functions. If the user now wishes to read data from the data transmit/receive device
`via the line 16, the host device sends a command, for example "readfile xy", to the
`interface device. As described above, the interface device appears to the host device
`as a hard disk. The second commandinterpreter of the digital signal processor now
`interprets the read command of the host processor as a data transfer command, by
`decoding whether
`"xy"
`denotes,
`for
`example,
`a
`"real-time
`input"
`file,
`a
`"configuration" file or an executablefile, whereby the same begins to transfer data
`from the data transmit/receive device via the second connecting device to the first
`connecting device and via the line 11 to the host device.
`
`Preferably, the volume of data to be acquired by a data transmit/receive device is
`specified in a configuration file described in the following by the user specifying in
`the said configuration file that a measurementis to last, for example, five minutes. To
`the host device the "real-time input" file then appears as a file whose length
`correspondsto the anticipated volume of data in those five minutes. Those skilled in
`
`the art know that communication between a processor and a hard disk consists of the
`
`processor transferring to the hard disk the numbersof the blocks or clusters or sectors
`whosecontentsit wishes to read. By reference to the FAT the processor knows which
`information. is contained in which block. In this case, communication between the
`host device and the interface device according to the pr