`By:
`Timothy M. Nitsch (Reg. No. 58,016)
`Robert S. Rigg (Reg. No. )
`VEDDER PRICE P.C.
`222 N. LaSalle St., Suite 2600
`Chicago, Illinois 60601
`Tel: (312) 609-7500
`rrigg@vedderprice.com
`tnitsch@vedderprice.com
`
`UNITED STATES PATENT AND TRADEMARK OFFICE
`
`____________________________________________
`
`BEFORE THE PATENT TRIAL AND APPEAL BOARD
`____________________________________________
`
`SATCO Products, Inc.
`Petitioner,
`
`v.
`
`LIGHTING SCIENCE GROUP CORP.
`Patent Owner.
`
`____________________________________________
`
`IPR Trial No.: 2017-01643
`Patent 8,672,518
`____________________________________________
`
`PETITION FOR INTER PARTES REVIEW OF
`UNDER 35 U.S.C. §§ 311-319 AND 37 C.F.R. § 42.100 ET SEQ.
`
`CHICAGO/#2981596
`
`
`
`TABLE OF CONTENTS
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`Page
`
`I.
`II.
`
`III.
`
`MANDATORY NOTICES AND CERTIFICATION ....................................................... 1
`OVERVIEW OF THE ‘518 PATENT ............................................................................... 2
`Technology ........................................................................................................................ 2
`The ‘518 Patent .................................................................................................................. 3
`Prosecution History of the ‘518 Patent and ‘968 Patent .................................................... 5
`OVERVIEW OF THE PRIOR ART.................................................................................. 8
`A.
`Overview of Chou .................................................................................................. 8
`B.
`Overview of Zhang ................................................................................................. 9
`C.
`Overview of Tickner ................................................................................ 10
`D.
`Overview of Van De Ven ........................................................................ 10
`E.
`Overview of Sung .................................................................................... 11
`F.
`Overview of OptoElectronix ULE5000 ................................................... 12
`G.
`Lightolier Model 6618 Lighting Fixture .................................................. 13
`CLAIM CONSTRUCTION ............................................................................................. 15
`SUMMARY OF SPECIFIC GROUNDS FOR PETITION............................................. 16
`GROUND 1: CLAIMS 1-2 AND 5-8 ARE Anticipated by TIckner.............................. 16
`Claim 1 ............................................................................................................................. 17
`Claim 2 ............................................................................................................................. 21
`Claim 3 ............................................................................................................................. 21
`Claim 5 ............................................................................................................................. 22
`Claim 6 ............................................................................................................................. 23
`Claim 7 ............................................................................................................................. 23
`Claim 8 ............................................................................................................................. 24
`VII. GROUND 2: CLAIM 4 is RENDERED OBVIOUS BY Tickner in LIGHT of
`ULE5000 .......................................................................................................................... 24
`Claim 4 ............................................................................................................................. 24
`VIII. GROUND 3: CLAIMS 10-12 ARE RENDERED OBVIOUS BY TICKNER in
`LIGHT OF CHOU, LIGHTOLIER AND SUNG ............................................................ 25
`Claim 10 ........................................................................................................................... 25
`
`IV.
`V.
`VI.
`
`
`CHICAGO/#2981596
`
`-i-
`
`
`
`
`
`U.S. Patent 8,201,968
`Petition for Inter Partes Review
`
`TABLE OF CONTENTS
`(continued)
`
`Page
`
`Claim 11 ........................................................................................................................... 26
`Claim 12 ........................................................................................................................... 26
`GROUND 4: CLAIMs 1 and 3-6 are Rendered obvious by chou in view of
`tickner .............................................................................................................................. 26
`Claim 1 ............................................................................................................................. 26
`Claim 3 ............................................................................................................................. 32
`GROUND 5: CLAIMs 1, 3 and 6 are Rendered obvious by Zhang in view of
`tickner .............................................................................................................................. 34
`Claim 1 ............................................................................................................................. 34
`Claim 3 ............................................................................................................................. 38
`Claim 6 ............................................................................................................................. 39
`CONCLUSION ................................................................................................................ 39
`
`IX.
`
`X.
`
`XI.
`
`
`CHICAGO/#2981596
`
`-ii-
`
`
`
`
`
`TABLE OF AUTHORITIES
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`
`
`Page(s)
`
`Cases
`
`Cuozzo Speed Techs., LLC v. Lee, 136 S. Ct. 2131, 2142, --- U.S. --- (2016) ............................. 15
`
`In re Gleave, 560 F.3d 1331, 1334 (Fed. Cir. 2009)............................................................... 26, 27
`
`In re Translogic Tech., Inc., 504 F.3d 1249, 1257 (Fed. Cir. 2007) ............................................. 15
`
`Statutes
`
`35 USC § 112 .................................................................................................................................12
`
`Other Authorities
`
`37 C.F.R. § 42.8(b)(1) ......................................................................................................................1
`
`37 C.F.R. § 42.8(b)(2) ......................................................................................................................1
`
`37 C.F.R. § 42.8(b)(3) and (4) .........................................................................................................1
`
`37 C.F.R. § 42.15(b) ........................................................................................................................2
`
`37 C.F.R. § 42.100(b) ....................................................................................................................11
`
`37 C.F.R. § 42.103(a).......................................................................................................................2
`
`37 C.F.R. § 42.104(a).......................................................................................................................1
`
`37 C.F.R. § 42.104(b) ......................................................................................................................2
`
`
`CHICAGO/#2981596
`
`iii
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`LIST OF EXHIBITS
`
`Exhibit
`Ex. 1001
`Ex. 1002
`
`Ex. 1003
`Ex. 1004
`Ex. 1005
`Ex. 1006
`Ex. 1007
`Ex. 1008
`Ex. 1009
`Ex. 1010
`Ex. 1011
`Ex. 1012
`Ex. 1013
`
`Description
`U.S. Patent No. 8,672,518
`Declaration of Victor Roberts in Support of Petition for Inter Partes Review of
`U.S. Patent No. 8,672,518 (“Roberts Decl.”)
`Original Application 12/775310
`Original claims of Application 12/775310
`Preliminary Amendment
`Notice of Allowance
`Amendment After Notice of Allowance
`U.S. Patent No. 7,670,021 (“Chou”)
`U.S. Patent No. 7,722,227 (“Zhang”)
`U.S. Patent Pub. No. 2009/0086476 (“Tickner”)
`U.S. Patent No. 8,777,449 (“Van De Ven”)
`U.S. Patent No. 6,292,375 (“Sung”)
`OptoElctronix ULE5000 Series Data Sheet (“ULE 5000”)
`
`
`CHICAGO/#2981596
`
`iv
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`I.
`
`MANDATORY NOTICES AND CERTIFICATION
`
`Real Party-in-Interest.1 The petitioner is Satco Products, Inc. (“Satco”).
`
`Related Matters.2 The instant petition concerns U.S. Patent No. 8,672,518 (“‘518
`
`Patent”) (Ex. 1001). The owner of the patent, Lighting Science Group Corp. (“LSG”), has
`
`asserted the ‘518 patent in the following civil actions against the following defendants in the
`
`Middle District of Florida: 6:16-cv-00338 (Sea Gull Lighting Products, LLC et al.); 6:16-cv-
`
`00343-PGB-TBS (Hyperikon, Inc.); 6:16-cv-00344 (U.S.A. Light & Electric, Inc.); 6:16-cv-
`
`00413 (Nicor, Inc.); 6:16-cv-00677 (Sunco Lighting Inc.); 6:16-cv-00678 (Panor Corp. d/b/a
`
`Maxxima); 6:16-cv-00679 (Sels Inc.); 6:16-cv-00680 (Eel Company Ltd.); 6:16-cv-00681
`
`(GlobaLux Lighting LLC); 6:16-cv-01084 (Hubbell Inc. et al.); 6:16-cv-01087 (American De
`
`Rosa Lamparts, LLC); 6:16-cv-01228 (Titch Industries Inc); 6:16-cv-1256 (Satco Products d/b/a
`
`Nuvo Lighting); 6:16-cv-01255 (Technical Consumer Products, Inc.); 6:16-cv-01320 (Wangs
`
`Alliance Corp. et al.); and 6:16-cv-01321 (Amax Lighting).
`
`Designation of Counsel.3 The counsel and service information are identified in the
`
`signature block of this Petition. Petitioner consents to service by email.
`
`Certification of Grounds for Standing.4 Petitioner certifies that the patent for which
`
`review is sought is available for inter partes review and that Petitioner is not barred or estopped
`
`from requesting an inter partes review on the grounds identified in this Petition.
`
`1 37 C.F.R. § 42.8(b)(1).
`
`2 37 C.F.R. § 42.8(b)(2).
`
`3 37 C.F.R. § 42.8(b)(3) and (4).
`
`4 37 C.F.R. § 42.104(a).
`
`
`CHICAGO/#2981596
`
`1
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`Filing fees.5 The required fees are submitted herewith in accordance with 37 C.F.R.
`
`§§ 42.103(a) and 42.15(b). If any additional fees to be paid by the Petitioner are due during this
`
`proceeding, the Office is authorized to charge such fees to Deposit Account No.22-0259.
`
`Identification of Challenge and Relief Requested.6 Petitioner requests inter partes
`
`review and cancellation of claims 1-3, 5, 7, 9-10, 12, 14, 16, 17, and 20-24 of the ‘844 Patent on
`
`the grounds set forth below. Petitioner’s detailed statement of the reasons for relief requested is
`
`set forth in sections V-XIV below.
`
`II.
`
`OVERVIEW OF THE ‘518 PATENT
`
`Technology
`
`Lighting fixtures come in a variety of shapes and sizes. One particular shape is a low-
`
`profile fixture such as a low-profile ceiling fixture. Low-profile fixtures generally sit close to the
`
`wall or ceiling and do not protrude substantially into the room. Low-profile fixtures are
`
`commonly constructed of metal, plastic and glass in a wide variety of forms or trims, reflecting a
`
`wide variety of aesthetic choices. Low profile fixtures include fixtures that sit entirely on a
`
`surface, such as a wall or ceiling, and have a lateral extent that is significantly greater than their
`
`“height” as measured from the surface; plus fixtures that have a portion that extends into an
`
`opening in the surface while the exposed portion has a lateral dimension that is significantly
`
`greater than the “height” of the fixture above the surface.
`
`Some lighting fixtures, including low profile lighting fixtures, use light emitting diodes
`
`(“LEDs”) to produce light. LEDs produce heat. That heat must be dissipated. The waste heat
`
`from LEDs that produce light that can illuminate a surface or room, as opposed to low power
`
`5 37 C.F.R. §§ 42.103(a) and 42.15(b).
`
`6 37 C.F.R. § 42.104(b).
`
`
`CHICAGO/#2981596
`
`2
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`LEDs used as indicators, is commonly dissipated by means of a heat sink – one or more pieces
`
`of thermally conductive material (e.g. metal) that carry the heat away from the LEDs and
`
`dissipate it into the air.
`
`LEDs also require power conditioning. Rather than using residential or commercial line
`
`voltage (e.g. 120 volts AC), LEDs commonly require lower-voltage, current-controlled, DC
`
`power. LED power converters (commonly referred to as “drivers”) come in a wide variety of
`
`sizes, shapes and power levels.
`
`The ‘518 Patent
`
`The ‘518 Patent generally concerns heat dissipation in LED-based lighting fixtures,
`
`including low-profile lighting fixtures; and means to connect said fixtures to the building power
`
`lines. ‘518 Patent at Abstract; 1:15-17, 2:42-58. The luminaire of the ‘518 Patent includes one
`
`or more LEDs, a heat spreader, a heat sink, and an optic for focusing or diffusing light into the
`
`illuminated area. Id. at 1:46-53. The LED generates heat; the heat spreader transfers the heat to
`
`a heat sink; and the heat sink dissipates the heat into the air. Id. 1:47-53, , 2:23-32. The ‘518
`
`Patent defines “low-profile” in terms of the height-to-diameter ratio of the combined heat
`
`spreader, heat sink, and optic. Id. at 1:53-56, 2:16-19, 4:52-56. Essentially, the ‘518 Patent
`
`describes using the fixture’s own trim as the heat sink in order to keep the fixture cool and low-
`
`profile.
`
`Specifically, the ‘518 Patent claims a luminaire comprising a heat spreader, a “ring
`
`shaped” heat sink around its outer periphery, an optic, an LED light source, and a means to
`
`connect the fixture to the building power lines, wherein the heat sink, heat spreader and optic in
`
`combination have a combined height-to-diameter ratio of 0.25 and are sized to cover the opening
`
`of a standard 4-inch light can fixture or junction box.
`
`1.
`
`Claim 1 is illustrative:
`
`
`CHICAGO/#2981596
`
`3
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`1. A luminaire and accessory kit in combination, the combination comprising:
`
`a luminaire, comprising:
`
`a heat spreader; a heat sink disposed in thermal communication with the heat spreader;
`
`light source comprising a plurality of light emitting diodes (LEDs) disposed in
`
`thermal communication with the heat spreader; a power supply electrically
`
`connected to the light source; an electrical supply line having a first end
`
`connected to the power supply, and a second end connected to a plug-in
`
`connector; and, an optic disposed in optical communication with the LEDs; and
`
`an accessory kit, comprising:
`
`at least one of: a first pre-wired jumper comprising a pair of insulated electrical wires
`
`having a first plug-in connector electrically connected at one end and an Edison
`
`base electrically connected at the other end; and, a second pre-wired jumper
`
`comprising a pair of insulated electrical wires having a second plug-in connector
`
`electrically connected at one end and cut wire ends at the other end;
`
`wherein the plug-in connector of the first pre-wired jumper and the second pre-wired jumper are
`
`each configured to electrically engage with the plug-in connector of the electrical supply line.
`
`Figure 12 of the ‘518 Patent illustrates an embodiment of Claim 1.
`
`Id. at Fig. 12.
`
`
`CHICAGO/#2981596
`
`4
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`As shown in Figure 12, the LED light source 120 is mounted on the “heat spreader” 105
`
`which is in thermal communication with heat sink 110. An outer optic 115 spans the heat
`
`spreader 105. A power conditioner 140, 160 mounted on the heat spreader 105 provides DC
`
`power to the LEDs 120. The heat spreader 105, heat sink 110, and outer optic 115 in
`
`combination define an overall outer dimension (i.e. diameter) of the light fixture large enough to
`
`cover the opening of a standard four-inch light can fixture and standard four-inch junction box
`
`(not shown). ‘518 Patent at 6:7-31.
`
`FIG. 31 depicts the claimed accessory kit.
`
`The accessory kit includes a first pre wired jumper 520 and a second pre wired jumper
`
`525 with each pre wired jumper including a pair of wires 521 and 526 and a plug in male
`
`connector 535. The first pre wired jumper 520 includes a pre wired Edison base 540. The
`
`second pre wired jumper 525 includes open wire ends 527. ’518 Patent at 10:58-11:24.
`
`Prosecution History of the ‘518 Patent and ‘968 Patent
`
`The ‘518 Patent was filed on May 21, 2012 as U.S. Application No. 13/476,388 as a
`
`Continuation in Part Application of Application No. 12/775,310, now Pat. No. 8,201,968
`
`claiming the benefit of priority to U.S. Provisional Application No. 61/248,665 filed October 5,
`
`
`CHICAGO/#2981596
`
`5
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`2009. The ‘968 Patent issued on June 19, 2012. In allowing the claims, the Examiner stated
`
`“Claim 1 is allowed because the prior art of record failed to teach a kit in combination with the
`
`luminaire which includes a luminaire and accessory kit in combination.”
`
`The prosecution history of the ‘968 Patent is particularly relevant to this Petition as 1) the
`
`‘518 patent is a continuation in part of the ‘968 Patent, and 2) the claims of the ‘968 Patent are
`
`similar to the claims of the ‘518 Patent. U.S. Application No. 12/775,310 originally contained
`
`twenty claims. Ex. 1006 (Original Claims). In the first and only office action, the Examiner
`
`rejected claims 1-8 and 10-16 as anticipated by Roberge et al. (WO 2008/137732)7 (“Roberge”)
`
`and rejected claims 1-3, 7-10, and 17-20 as anticipated by Chou (U.S. Appl. Pub.
`
`No. 2009/0086474)8 (“Chou”). Ex. 1007 (Office Action mailed October 12, 2011). No claims
`
`were allowed. Id. at 1.9
`
`In response, Applicants amended independent claims 1 and 17 to define the shape of the
`
`heat sink as “substantially ring-shaped” and “ring-shaped,” respectively.10 Ex. 1008 (Reply to
`
`7 The International PCT Publication WO 2008/137732 is equivalent to the disclosure in U.S. Pat.
`
`No. 7,828,465 to Roberge et al. filed May 2, 2008 and issued Nov. 9, 2010. Ex. 1011.
`
`8 U.S. Appl. Pub. No. 2009/0086474 is equivalent to the disclosure in U.S. Pat. No. 7,670,021 to
`
`Chou filed May 20, 2008 and issued March 2, 2010. Ex. 1010.
`
`9 Claim 17 was renumbered to claim 20 upon issuance of the ‘968 Patent.
`
`10 Applicants also amended the claims to require that the LEDs be “disposed on” the heat
`
`spreader, id. at 2, 5 (Amended Claims), and then analogized the Roberge “bezel plate” to a heat
`
`spreader, and found the Roberge heat sink “not disposed around and coupled to an outer
`
`periphery of the heat spreader,” id. at 7 (Remarks). Petitioner is unsure what to make of the
`
`discussion. The bezel of Roberge has little to do with heat management.
`
`
`CHICAGO/#2981596
`
`6
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`Office Action) at 2, 5. Applicants further amended the independent claims to recite that the
`
`LEDs “are disposed on the heat spreader such that the heat spreader dissipates heat from the
`
`LEDs.” Id. at 2, 5. Applicants amended claim 17 to add a 0.25 height/diameter ratio limitation
`
`(a limitation previously found anticipated by Roberge and Chou in the Examiner’s rejection of
`
`claim 1). Id. at 5.
`
`As to the Examiner’s rejection of claim 1 over Roberge, Applicants did not contest that
`
`Roberge discloses the claimed height/diameter ratio of 0.25 but pointed instead to Fig. 3B and
`
`argued that the heat sink in Roberge is not “ring-shaped.” Id. at 7 (Remarks). Applicants did not
`
`point to the portion of Roberge disclosing that the heat sink can instead have a “diameter” and
`
`may be “round.” Id. at 7; Roberge at 24:21-24 (“diameter”); Provisional at ¶112 (“round”).11
`
`As to the Examiner’s rejection of Claims 1 and 17 over Chou, Applicants pointed to
`
`“heatsink 14” and argued it (i) is not substantially ring-shaped and (ii) causes Chou to not meet
`
`the 0.25 H/D ratio limitation. Id. at 8. Applicants did not point to the thermally conductive trim
`
`12 of Chou, which is a heat sink of a shape and profile nearly identical to the trim of Fig. 12
`
`(110) of the ‘968 Patent.
`
`Without further comment, the Examiner allowed all claims on the basis of “[a]pplicant’s
`
`amendment and accompanying remarks.” Ex. 1009 (‘968 Notice of Allowance) at 2.
`
`11 The Roberge provisional was incorporated by reference in the Roberge ‘465 Patent. Ex. 1011
`
`at 1:7-15.
`
`
`CHICAGO/#2981596
`
`7
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`III.
`
`OVERVIEW OF THE PRIOR ART
`
`As set forth below, several prior art references accomplish the same goal in the same
`
`manner as the ‘968 Patent: dissipating heat from a low-profile LED fixture by using the fixture’s
`
`own trim or periphery as a heat sink.
`
`A.
`
`Overview of Chou
`
`U.S. Pat. No. 7,670,021 (“Chou”) (Ex. 1010), which issued on March 2, 2010 from an
`
`application filed on May 20, 2008, claiming priority to provisional application 60/975,657 filed
`
`on October 10, 2007, discloses a low-profile ceiling LED luminaire that dissipates heat into the
`
`surrounding air via an exterior trim. Chou at 1. Chou discloses one embodiment as follows:
`
`Chou at Fig. 2a, 2b.
`
`Chou dissipates heat in two ways. The first is through a metal trim 12 on the underside
`
`of the fixture. Id. at 3:44-47, 4:4-16, Fig. 2b at 12. LEDs 15 are mounted on the underside of
`
`the trim 12. An LED driver, circuit board 17, is mounted on the top side. Id. at 4:21-27. The
`
`center portion of the trim transfers heat out to the outer portion of the trim, flange 22. Id. at 5:1-
`
`11. From there it is dissipated into the air. Id. at 5:5-11, 7:44-46. The “trim” in Chou thus has
`
`two portions: (1) a flat interior portion that spreads the heat, and (2) an outer, ring-shaped flange
`
`that dissipates the heat into the air. See also Figs. 4a and 4b (showing flat portion and flange).
`
`
`CHICAGO/#2981596
`
`8
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`The trim’s height (including optic) is 42 mm; its diameter 200 mm; the ratio is 0.21. Id. at 5:24-
`
`28.
`
`The second way in which Chou dissipates heat is through an additional, secondary
`
`heatsink 14, mounted on the top side of the fixture, which extends up into a conventional ceiling
`
`“can.” Id. at Fig. 2b, 3, 8; 4:40-54. Because the upper heat sink is trapped up inside the can, “a
`
`majority of the heat [is] dissipated [through the] trim 12 outside the housing,” i.e., into the room.
`
`Id. at 5:9-10.
`
`B.
`
`Overview of Zhang
`
`U U.S. Pat. No. 7,722,227 (“Zhang”), which issued on May 25, 2010 upon an application
`
`filed on October 10, 2008 claiming priority to provisional application 60/979068, filed on
`
`October 10, 2007, likewise discloses a low-profile ceiling fixture that dissipates heat to the
`
`surrounding air via a ring-shaped trim. Zhang at 1. An illustration of Zhang is as follows:
`
`Zhang at Figs. 5 and 10.
`
`
`CHICAGO/#2981596
`
`9
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`Zhang dissipates heat as follows: The LEDs and a driver are mounted onto a thermally-
`
`conductive “trim cup” (112) at the top of the fixture. Id. at 8:10-12, 9:44-48. The trim cup
`
`spreads the LED-generated heat to a peripherally surrounding baffle/heat sink/trim combination
`
`(98, 100, 52). Id. 7:63-8:1, 9:37-47, Fig. 5. The baffle/heat sink/trim combination is shaped like
`
`a top hat. The trim portion of the top hat is ring-shaped. Id. at Fig 5 (item 52). The trim portion
`
`dissipates the heat into the air. Id. at 7:9-13, 7:31-34.
`
`C.
`
`Overview of Tickner
`
`Tickner, U.S. Patent Pub. No. 2009/0086476, was filed on September 22, 2008. Because
`
`the Tickner was filed more than twelve months before the ‘844 patent, it is valid prior art under
`
`35 U.S.C. 102 and 35 U.S.C. 103. An illustration of Tickner is as follows:
`
`For purposes of the Petition, the relevant portions of Tickner are the heat spreader 330,
`
`heat sink 320, LED package 305, power driver 315 and junction box 315. Tickner discloses that
`
`the heat spreader 310 is in thermal communication with the heat sink 320. Tickner, para. [0052].
`
`Tickner also discloses a power driver 315 supplying power to the LED package 305.
`
`Tickner, Fig. 8; para. [0045]. Tickner also discloses the Edison base adapter that removable
`
`connects to the driver of the fixture. See Figs 15 and 16 of Tickner.
`
`D.
`
`Overview of Van De Ven
`
`Van De Ven, U.S. Patent No. 8,777,449, was filed on September 25, 2009 and is also valid prior
`
`art under 35 U.S.C. 102 and 35 U.S.C. 103. An illustration of Van De Ven is below:
`
`
`CHICAGO/#2981596
`
`10
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`The relevant portions of Van De Ven include the trim element 102, light emitting diodes 113,
`
`driver circuit board 105, outer optic 119 and trim element 109. See Figs 5 and 7. Van de Ven
`
`discloses that the trim element 109 is in thermal communication with the trim element 102 and
`
`the light emitting diodes 113 via a thermally conductive pad 111. Van De Ven at 18:53-64,
`
`25:38-26:13, 27:35-41
`
`E.
`
`Overview of Sung
`
`Sung, U.S. Patent No. 6,292,375, was filed on January 5, 2000 and is also valid prior art under
`
`35 U.S.C. 102 and 35 U.S.C. 103. An illustration of Sung is below:
`
`
`CHICAGO/#2981596
`
`11
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
` Sung at Figs. 4a, 4b & 4c.
`
`Sung teaches a lighting device with a light source, a power supply, Edison screw base, and a
`
`removable translucent cover through which the light passes, where the translucent cover can be
`
`retained by interlocking tabs that are rotationally attached and detached. Sung at Abstract, 1:6-
`
`7, 1:13-16, 1:63-64, 2:6-8, 2:13-30, 3:6-16, 3:38-43 and Fig’s 4a, 4b & 4c.
`
`F.
`
`Overview of OptoElectronix ULE5000
`
`The OptoElectonix ULE5000 was advertised in a document titled “OptoElectonix Plug-
`
`&Play LED Light Engine Products” with a copyright of 2008 and is also valid prior art under 5
`
`U.S.C. 102 and 35 U.S.C. 103. An illustration of ULE5000 is shown below:
`
`
`CHICAGO/#2981596
`
`12
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`Using the dimensions of displayed in the document, the ratio of the height (1.44”) to the
`
`(8.09”) is 0.17.
`
`G.
`
`Lightolier Model 6618 Lighting Fixture
`
`The Lightolier Model 6618 lighting fixture shown in the images below was commercially
`
`available in the late 1980’s.
`
`The label of the fixture shows the manufacturer, Lightolier, the model number, 6618, and the
`manufacturing date: the 16th week of 1987.
`
`Label on Lightolier Model 6618 Lighting Ficture
`
`The Lightolier Model 6618 lighting fixture has a removable lens that is rotationally attached use
`
`three tabs on the base of the fixture and three tabs on the cover.
`
`
`CHICAGO/#2981596
`
`13
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`Lightolier Model 6618 Operating
`
`Lightolier Model 6618 with Lens Removed
`Showing Three Tabs Used to Hold the Lens
`And Instructions to Rotate the Lens to Remove or Attach
`
`Open/Lock Instructions and One Lens Attachment Tab on Lightolier Model 6618
`
`
`CHICAGO/#2981596
`
`14
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`Lightolier Model 6618 Lens
`
`One of Three Attachment tabs on Lens of Lightolier Model 6618 Lighting Fixture
`
`IV.
`
`CLAIM CONSTRUCTION
`
`A claim in an inter partes review of an unexpired patent is given the “broadest reasonable
`
`construction in light of the specification.” 37 C.F.R. § 42.100(b); Cuozzo Speed Techs., LLC v.
`
`Lee, 136 S. Ct. 2131, 2142, --- U.S. --- (2016). Claim terms are given their ordinary and
`
`customary meaning, as would be understood by one of ordinary skill in the art in the context of
`
`the entire disclosure. In re Translogic Tech., Inc., 504 F.3d 1249, 1257 (Fed. Cir. 2007).
`
`1.
`
`“heat spreader” and “heat sink”
`
`The term, “heat spreader,” ordinarily refers to a device used to move thermal energy from
`
`a (typically concentrated) heat source to another location where the thermal energy can be
`
`
`CHICAGO/#2981596
`
`15
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`absorbed or dissipated. Roberts Decl, ¶49. The heat spreader can be integrated into the heat
`
`sink, or can be a small thermal gap pad sandwiched between a heat source and a heat sink to
`
`accommodate small geometric discontinuities, or it can be a separate device made from
`
`thermally conducting material. Id. The broadest reasonable interpretation of these terms, in light
`
`of the specification, is that the “heat spreader” is that which moves heat from the heat source to
`
`the heat sink. The “heat sink” is that which dissipates the heat into the air. Id.
`
`2.
`
` “ring-shaped”
`
`The broadest reasonable interpretation of “ring-shaped” is: generally round with a hole or
`
`cavity in the middle. Roberts Decl, ¶50. A “ring-shaped” structure surrounds a space or cavity.
`
`Id. It need not be perfectly circular nor perfectly smooth. Id. Similarly, the interior hole need
`
`not be perfectly round nor perfectly smooth. Id. The specification neither defines, limits, nor
`
`uses the term – further suggesting a broad interpretation.
`
`V.
`
`SUMMARY OF SPECIFIC GROUNDS FOR PETITION
`
`Ground Reference(s)
`1
`Anticipated by Tickner
`2
`Rendered Obvious by Tickner in light of ULE 5000
`3
`Rendered Obvious by Tickner in light of Chou,
`Lightolier and Sung
`Rendered Obvious by Chou in light of Tickner
`Rendered Obvious by Zhang in view of Tickner
`
`4
`5
`
`Basis
`§ 102
`§ 103
`§ 103
`
`§ 103
`§ 103
`
`Claims
`1-3, 5-8
`4
`10-15
`
`1-6
`1, 3, 6
`
`VI.
`
`GROUND 1: CLAIMS 1-2 AND 5-8 ARE ANTICIPATED BY TICKNER
`
`Tickner teaches elements corresponding to each and every limitation of claims 1-3 and 5-
`
`8, arranged as in the claims.
`
`
`CHICAGO/#2981596
`
`16
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`Claim 1
`
`1.
`
` “a heat spreader; a heat sink disposed in thermal communication with the heat
`spreader”
`
`FIG. 8 of the Tickner shows a heat spreader 310a that forms the bottom surface of heat
`
`sink 310. Id. at para. [0050]. (“As illustrated in FIG. 10, the heat sink 310 is configured to
`
`dissipate heat from the LED package 305 along a heat-transfer path that extends from the LED
`
`package 305, through the bottom surface 310a of the heat sink, and to the fins 311 via the core
`
`905.) Further, the specification of the Ticker states “In certain exemplary embodiments, the
`
`reflector housing is formed integrally with the heat sink” and “the reflector housing 320 is
`
`configured to act as a secondary heat sink for conducting heat away from the LEDs.” Tickner,
`
`¶0052. Therefore, Tickner discloses the claimed heat spreader and heat sink in thermal
`
`communication.
`
`
`CHICAGO/#2981596
`
`17
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`2.
`
`“a light source comprising a plurality of light emitting diodes dispose in
`thermal communication with the heat spreader”
`
`Tickner discloses a LED package 305 in thermal communication with the heat spreader
`
`310. Tickner, FIG. 8.
`
`3.
`
`“a power supply electrically connected to the light source”
`
`Tickner discloses a power driver 315 supplying power to the LED package 305. Fig. 8,
`
`Tickner, ¶0045.
`
`4.
`
`“an electrical supply line having a first end connected to the power supply, and
`a second end connected a plug in connector”
`
`Tickner discloses “In step 1425, the person plugs wiring 1530 from the LED module 300
`
`into the Edison base adapter 1520. For example, the person can plug one or more quick-connect
`
`or plug connectors 350 from driver 315 into Edison base adapter 1520.” Tickner, ¶0063 and Fig.
`
`15.
`
`
`CHICAGO/#2981596
`
`18
`
`
`
`U.S. Patent 8,672,518
`Petition for Inter Partes Review
`
`5.
`
`“an optic disposed in optical communication with the LEDs”
`
`Tickner discloses “An optic coupler can be mounted to the reflector housing, for covering
`
`electrical connections at the substrate of the LED package and/or for guiding or reflecting light
`
`emitted by the LED package.” Tickner, ¶0011.
`
`6.
`
` “an accessory kit, comprising, at least one of a first pre-wired jumper
`comprising a pair of insulated electrical wires having a first plug in connector
`electrically connected at one end and an Edison base electrically connected on
`the other end.”
`
`Tickner discloses
`
`“In step 1425, the person plugs wiring 1530 from the LED module 300 into the
`Edison base adapter 1520. For example, t