`__________________
`
`BEFORE THE PATENT TRIAL AND APPEAL BOARD
`__________________________________________________________________
`
`VOLKSWAGEN GROUP OF AMERICA, INC.
`
`Petitioner
`
`
`Patent No. 7,237,634
`Issue Date: July 3, 2007
`Title: HYBRID VEHICLES
`__________________________________________________________________
`
`PETITION FOR INTER PARTES REVIEW
`OF U.S. PATENT NO. 7,237,634
`PURSUANT TO 35 U.S.C. § 312 and 37 C.F.R. § 42.104
`
`Case No. IPR2017-00234
`__________________________________________________________________
`
`
`
`
`
`
`
`
`
`I.
`II.
`III.
`
`TABLE OF CONTENTS
`Mandatory Notices (37 C.F.R. § 42.8) ........................................................... 1
`Grounds for Standing (37 C.F.R. § 42.104(a)) ............................................... 2
`Identification of Challenge (37 C.F.R. § 42.104(b)(1)-(3)) and Relief
`Requested (37 C.F.R. § 42.22(a)(1)) .............................................................. 2
`A.
`The ’634 Patent .................................................................................... 2
`B.
`Prosecution History of the ’634 Patent ................................................ 3
`Inter Partes Review of the ’634 Patent ................................................ 5
`C.
`D.
`Patents and Printed Publications Relied On ......................................... 8
`E.
`Statutory Grounds for Challenge (37 C.F.R. § 42.104(b)(1)-(2)) ........ 9
`F.
`Claim Construction (37 C.F.R. § 42.104(b)(3)) ................................... 9
`IV. How Challenged Claims Are Unpatentable (37 C.F.R. § 42.104(b)(4)-
`(5)) ................................................................................................................ 10
`A.
`Claims 215, 226, 227, 229, 230, 240, 241, 252, 253, 255, 256,
`259, and 266, are Obvious in View of Barske, Gray, and
`Vittone ................................................................................................ 14
`1.
`Independent Claims 215 and 241 ............................................. 16
`2.
`Dependent Claims 226, 227, 229, 230, 240, 252, 253,
`255, 256, 259, and 266 ............................................................. 26
`Obviousness in View of Barske, Gray, and Vittone ................ 31
`3.
`Claim Charts ............................................................................ 35
`4.
`Claims 231, and 257 are Obvious in View of Barske, Gray,
`Vittone, and Lateur ............................................................................. 49
`1.
`Claims 231 and 257 ................................................................. 50
`2.
`Obviousness in View of Barske, Gray, Vittone and
`Lateur ....................................................................................... 50
`Claim Charts ............................................................................ 51
`3.
`Claims 239, 258, and 265 are Obvious in View of Barske, Gray,
`Vittone, and Severinsky ’970 ............................................................. 53
`1.
`Claims 239, 258, and 265 ........................................................ 54
`2.
`Obviousness in View of Barske, Gray, Vittone, and
`Severinsky ’970 ........................................................................ 55
`i
`
`B.
`
`C.
`
`
`
`
`
`V.
`
`3.
`Claim Charts ............................................................................ 56
`Conclusion .................................................................................................... 58
`
`
`
`ii
`
`
`
`
`
`Exhibit 1001
`
`Exhibit 1002
`
`Exhibit 1003
`
`
`Exhibit 1004
`
`Exhibit 1005
`
`
`Exhibit 1006
`
`Exhibit 1007
`
`Exhibit 1008
`
`
`Exhibit 1009
`
`
`Exhibit 1010
`
`
`Exhibit 1011
`
`
`
`LISTING OF EXHIBITS
`
`U.S. Patent No. 7,237,634 to Severinsky et al.
`
`Declaration of Scott Andrews
`
`German Published Patent Application No. 44 44 545,
`including certified English-language translation
`
`U.S. Patent No. 5,495,912 to Gray, Jr. et al.
`
`Vittone et al., FIAT Research Centre, Fiat Conceptual
`Approach to Hybrid Cars Design, 12th International
`Electric Vehicle Symposium (1994)
`
`U.S. Patent No. 5,823,280 to Lateur et al.
`
`U.S. Patent No. 5,343,970 to Severinsky
`
`Record of Oral Hearing, Held July 1, 2015, IPR2014-
`00570 (Paper 44, August 3, 2015)
`
`February 22, 2005 Amendment, U.S. Patent Application
`Serial No. 10/382,577, U.S. Patent No. 7,104,347
`
`Kalberlah, “Electric Hybrid Drive Systems for Passenger
`Cars and Taxis,” SAE (Society of Automotive Engineers)
`International Congress
`and Exposition, Detroit,
`Michigan, February 26-March 1, 1991 (1991)
`
`Paefgen et al., Der Audi Duo – das erste serienmäßige
`Hybridfahrzeug, ATZ Automobiletechnische Zeitschrift
`99
`(1997),
`including
`certified English-language
`translation
`
`iii
`
`
`
`
`
`I. Mandatory Notices (37 C.F.R. § 42.8)
`
`
`
`Real-Party-in Interest:
`
`Volkswagen Group of America, Inc. (“VWGoA”), which is a subsidiary of
`
`Volkswagen AG.
`
`Related Matters:
`
`The following judicial matters may affect, or be affected by, a decision in
`
`this inter partes review: Paice LLC, et al. v. Ford Motor Co., 1:14-cv-00492 (D.
`
`Md.); Paice LLC, et al. v. Hyundai Motor Co., et al., 1:12-cv-00499 (D. Md.);
`
`Paice LLC v. Toyota Motor Corp., et al., 2:07-cv-00180 (E.D. Tex.).
`
`The following administrative matters may affect, or be affected by, a
`
`decision in this inter partes review: Hybrid Electric Vehicles and Components
`
`Thereof, ITC-337-TA-998, in which VWGoA is a respondent; IPR2014-00904,
`
`IPR2014-01416, IPR2015-00606, IPR2015-00722, IPR2015-00758, IPR2015-
`
`00784,
`
`IPR2015-00785,
`
`IPR2015-00787,
`
`IPR2015-00790,
`
`IPR2015-00791,
`
`IPR2015-00799, IPR2015-00800, IPR2015-00801, IPR2016-00246, IPR2016-
`
`00247, IPR2016-00248, IPR2016-00249, IPR2016-00251.
`
`Lead Counsel:
`
`Michael J. Lennon (Reg. No. 26,562)
`
`Backup Counsel:
`
`Clifford A. Ulrich (Reg. No. 42,194)
`1
`
`
`
`
`
`Service:
`
`VWGoA agrees to electronic service at the following email addresses:
`
`mlennon@kenyon.com
`culrich@kenyon.com
`
`Service may be made at the following address:
`
`Andrews Kurth Kenyon LLP
`One Broadway
`New York, NY 10004
`Telephone: 212-425-7200
`Facsimile: 212-425-5288
`
`II. Grounds for Standing (37 C.F.R. § 42.104(a))
`
`VWGoA certifies that U.S. Pat. No. 7,237,634 (“the ’634 patent,” Ex. 1001)
`
`is available for inter partes review and that VWGoA is not barred or estopped
`
`from requesting an inter partes review challenging claims 215, 226, 227, 229, 230,
`
`231, 239-241, 252, 253, 255-259, 265, and 266 on the grounds identified in this
`
`petition.
`
`III. Identification of Challenge (37 C.F.R. § 42.104(b)(1)-(3)) and
`Relief Requested (37 C.F.R. § 42.22(a)(1))
`
`Claims 215, 226, 227, 229, 230, 231, 239-241, 252, 253, 255-259, 265, and
`
`266 of the ’634 patent are invalid under 35 U.S.C. § 103.
`
`A. The ’634 Patent
`
`The ’634 patent describes a hybrid vehicle that includes an internal
`
`combustion engine, an electric motor, and a battery, all of which are controlled by
`2
`
`
`
`
`
`a microprocessor in accordance with the vehicle’s instantaneous torque demands
`
`(i.e., road load). Ex. 1002, ¶ 3. The engine is capable of operating efficiently
`
`between a lower-level setpoint (“SP”) and a maximum torque output (“MTO”). Ex.
`
`1002, ¶ 3. The vehicle can operate in a number of operating modes, including a
`
`“low-load mode” (also referred to as “Mode I”), in which the vehicle is propelled
`
`only by the electric motor, a “highway cruising mode” (also referred to as “Mode
`
`IV”), in which the vehicle is propelled only by the engine, and an “acceleration
`
`mode” (also referred to a “Mode V”), in which the vehicle is propelled by both the
`
`engine and the electric motor. Ex. 1002, ¶ 3. The microprocessor determines the
`
`mode of operation based on road load. If the road load is below the setpoint (SP),
`
`the vehicle operates in Mode I (motor only); if the road load is between the
`
`setpoint (SP) and the maximum torque output (MTO) of the engine, the vehicle
`
`operates in Mode IV (engine only); if the road load is above the maximum torque
`
`output (MTO) of the engine, the vehicle operates in Mode V (motor and engine).
`
`Ex. 1002, ¶ 3.
`
`B. Prosecution History of the ’634 Patent
`
`The ’634 patent is a division of the application that lead to the issuance of
`
`U.S. Patent No. 7,104,347 (“the ’347 patent”) and was originally filed with 16
`
`claims, which were subsequently canceled in a preliminary amendment filed on
`
`May 8, 2006; the preliminary amended added application claims 17-75. In the first
`
`3
`
`
`
`
`
`Office Action (dated August 10, 2006), the Examiner rejected independent
`
`application claim 49, e.g., as obvious over U.S. Patent No. 5,495,912 (“Gray,” Ex.
`
`1004) and U.S. Patent No. 5,935,040 (“Tabata”). According to the Examiner, Gray
`
`describes nearly all of the limitations of application claim 49: determining
`
`instantaneous road load, operating an electric motor to propel a vehicle when the
`
`road load is below a setpoint, operating an engine to propel the vehicle when the
`
`road load is between a setpoint and a maximum torque output (MTO), wherein the
`
`engine is operable to efficiently produce torque above the setpoint, and wherein the
`
`setpoint is substantially less than the MTO, and operating the motor and engine
`
`when the road load is greater than the MTO. August 8, 2006 Office Action, 4-5.1 In
`
`the same Office Action, the Examiner indicated that dependent application claims
`
`67 and 70 for example, which added the limitations, respectively, “regeneratively
`
`charging a battery of the hybrid vehicle when instantaneous torque output of the
`
`engine the RL is negative, and/ or when braking is operator of the hybrid vehicle,”
`
`and “controlling the engine such that combustion of fuel within the engine occurs
`
`
`1 Although the Examiner indicated that Gray does not show an electric motor and
`
`battery, Gray states that “the power storage device could be, for example, the
`
`combination of a storage battery, generator/alternator and an electric motor.” Gray,
`
`3:36-39.
`
`4
`
`
`
`
`
`substantially at a stoichiometric ratio, wherein said controlling the engine
`
`comprises limiting a rate of change of torque output of the engine; and if the
`
`engine is incapable torque required to propel the of supplying instantaneous hybrid
`
`vehicle, supplying additional torque from the at least one electric motor,” included
`
`allowable subject matter. 2 Id., 5.
`
`Applicants did not dispute the Examiner’s findings regarding Gray. Instead,
`
`Applicants chose to add to application claim 235 the limitations of application
`
`claim 67, and add to application claim 261 the limitations of application claim 70.
`
`See November 22, 2006 Amendment. The claims were thereafter allowed, without
`
`comment from the Examiner.
`
`C. Inter Partes Review of the ’634 Patent
`
`As of the filing date of this petition, the ’634 patent is, or has been involved
`
`in eighteen other inter partes reviews proceedings, identified above in Section I.
`
`Throughout those proceedings, the Patent Owner (“Paice”) acknowledged that
`
`“road load” is “a very well-known concept in automotive design” (Ex. 1008, p. 40)
`
`
`2 The Examiner further required a Terminal Disclaimer over the ’347 patent,
`
`which Applicants later submitted. According to the Examiner, the claims of the
`
`’634 patent were not “patentably distinct” from the claims of the ’347 patent.
`
`5
`
`
`
`
`
`but characterized the use of road load as an input to a hybrid control strategy as a
`
`“completely new idea” and as the distinguishing limitation over the prior art. Id.:
`
`JUDGE MEDLEY: So that was well known at the time of the
`invention what road load was?
`MR. CORDELL [Paice’s counsel]: The term “road load” was,
`yes. Yes. But it being used as a control input for a hybrid was never
`done. Completely new idea. (Ex. 1008, p. 40).
`* * *
`MR. CORDELL: … But road load has been around forever,
`and pedal position has been around forever, and it’s not as if the idea
`that you, you know, the pedal position can’t affect road load is
`something new. That’s not new. What’s new is using the road load as
`the control variable, the controlling variable, to pick the mode, or to
`start the engine, or to activate the various systems involved. So, the
`idea that there is an output of the engine that will change, that is true,
`but we don’t use the output of the engine as the control variable, the
`controlling variable, it’s the road load. So that’s the important
`distinction, although a little bit different. (Ex. 1008, p. 127).
`
`
`As used in the ’634 patent, the term “road load” does not carry a special
`
`definition and is not a coined term. Instead, according to Paice, “road load is a
`
`“textbook concept that’s very, very well known,” Ex. 1008, p. 62, and the ’634
`
`patent uses the term “road load” according to its “very standard definition:”
`
`6
`
`
`
`
`
`MR. CORDELL: I think Mr. Angileri [Ford Motor Company’s
`counsel] suggested that we were advocating some special definition of
`road load that included vehicle acceleration in it, but that’s really not
`true. I mean, that vehicle acceleration is right there in the formula for
`road load. So, you’re using a very standard definition of road load.
`Could there be differences between different designs? Sure, but this is
`a generally-accepted definition of what road load is. (Ex. 1008, pp.
`97-98).
`* * *
`JUDGE DeFRANCO: … we’re talking about the inventor’s use
`of the term “road load” in terms of the ’347 patent. So, let’s focus on
`the intrinsic record.
`MR. CORDELL: Okay. He uses it in a standard way, Your
`Honor, and the definition we have seen several times through the
`specification is what he uses. (Ex. 1008. p, 128).
`
`
`As described by Paice, the “standard definition” of “road load” is “the torque
`
`required to propel the vehicle:”
`
`MR. CORDELL: … the parties agree that the terms are the
`same, whether it’s recited in claim 1 as the torque required to propel
`the vehicle, or road load, that those really mean the same thing. (Ex.
`1008, p. 130).
`
`
`As more fully set forth below, the prior art cited herein discloses the use of
`
`“road load” as the controlling variable in a hybrid control strategy to switch
`
`7
`
`
`
`
`
`between motor-only, engine-only, and engine-and-motor modes in the same
`
`manner as claimed in the ’634 patent, such that claims 215, 226, 227, 229, 230,
`
`231, 239-241, 252, 253, 255-259, 265, and 266 are unpatentable.
`
`D. Patents and Printed Publications Relied On
`
`1. German Published Patent Application No. 44 44 545 (“Barske,” Ex. 1003,
`
`including certified English-language translation), published on June 29, 1995,
`
`which constitutes prior against the ’634 patent under 35 U.S.C. § 102(b).
`
`
`
`2. U.S. Patent No. 5,495,912 (“Gray,” Ex. 1004), issued on March 5, 1996,
`
`which constitutes prior art against the ’634 patent under 35 U.S.C. § 102(b).
`
`
`
`3. Vittone et al., FIAT Research Centre, Fiat Conceptual Approach to Hybrid
`
`Cars Design, 12th International Electric Vehicle Symposium (1994) (“Vittone,”
`
`Ex. 1005) published December 5, 1994, which constitutes prior art against the ’634
`
`patent under 35 U.S.C. § 102(b).
`
`
`
`4. U.S. Patent No. 5,823,280 (“Lateur,” Ex. 1006), filed on January 12, 1995
`
`and issued on October 20, 1998, which constitutes prior art against the ’634 patent
`
`at least under 35 U.S.C. §§ 102(a) and (e).
`
`
`
`5. U.S. Patent No. 5,343,970 (“Severinsky ’970,” Ex. 1007), issued on
`
`September 6, 1994, which constitutes prior art against the ’634 patent under 35
`
`U.S.C. § 102(b).
`
`8
`
`
`
`
`
`E. Statutory Grounds for Challenge (37 C.F.R. § 42.104(b)(1)-(2))
`
`1. Claims 215, 226, 227, 229, 230, 240, 241, 252, 253, 255, 256, 259, and 266
`
`are obvious under 35 U.S.C. § 103(a) in view Barske, Gray, and Vittone.
`
`2. Claims 231 and 257 are obvious under 35 U.S.C. § 103(a) in view Barske,
`
`Gray, Vittone, and Lateur.
`
`3. Claims 239, 258, and 265 are obvious under 35 U.S.C. § 103(a) in view of
`
`Barske, Gray, Vittone, and Severinsky ’970
`
`F. Claim Construction (37 C.F.R. § 42.104(b)(3))
`
`The claim terms in an unexpired patent should be given their broadest
`
`reasonable construction in view of the specification. 37 C.F.R. § 42.100(b). The
`
`specification of the ’634 patent does not present special definitions for any claim
`
`term, and the original prosecution history of the ’634 patent does not include any
`
`claim construction arguments, so that all claim terms should be given their
`
`broadest reasonable construction.
`
`As described above, Paice has characterized “road load” as a “text book
`
`concept that’s very, very well known” and as meaning “torque required to propel
`
`the vehicle.” Thus, for the purposes of this proceeding, the broadest reasonable
`
`construction of “road load” should be understood to mean “torque required to
`
`propel the vehicle,” as advocated by Paice in other inter partes review proceedings
`
`and as used in the specification of the ’634 patent, e.g.:
`
`9
`
`
`
`
`
` “The vehicle operating mode is determined by a microprocessor
`
`responsive to the ‘road load’, that is, the vehicle’s instantaneous
`
`torque demands.” (Ex. 1001, 11:63-65).
`
` “[T]he vehicle operating mode is determined by a microprocessor
`
`responsive to the ‘road load’, that is, the vehicle’s instantaneous
`
`torque demands, i.e., that amount of torque required to propel the
`
`vehicle at a desired speed.” (Id., 12:42-46).
`
` “[A]pplicants’ ‘road load’, i.e., the torque required to propel the
`
`vehicle.” (Id., 14:18-22).
`
` “Figure 6 illustrates the several modes of vehicle operation with
`
`respect to the relationship between the vehicle’s instantaneous torque
`
`requirements or ‘road load.’ ” (Id., 35:18-20).
`
` “[T]he vehicle’s instantaneous torque requirement, that is, the ‘road
`
`load.’” (Id., 38:37-38).
`
` “[T]he vehicle’s instantaneous torque requirement, i.e., the ‘road load’
`
`RL.” (Id., 40:20-21).
`
`IV. How Challenged Claims Are Unpatentable (37 C.F.R. §
`42.104(b)(4)-(5))
`
`Since the mid-1970s, Volkswagen and Audi have been developing hybrid
`
`vehicle technologies, including hybrid drive systems that control the application of
`
`10
`
`
`
`
`
`torque from either an internal combustion engine, an electric motor, or both,
`
`depending on driving parameters. Ex. 1002, ¶ 4.
`
`For example, Barske, filed
`
`in 1994, describes certain aspects of
`
`Volkswagen’s hybrid technology. Ex. 1002, ¶ 5. Barske describes a parallel hybrid
`
`vehicle having an internal combustion engine and an electric motor, with a battery,
`
`for propelling the vehicle. Ex. 1002, ¶ 5. Barske describes using a crankshaft to
`
`couple or decouple modules of the engine and the motor from the drive train,
`
`depending on certain factors identified in Table II, reproduced below. Barske, 2:6-
`
`8, 3:31-4:5, Table II; Ex. 1002, ¶ 5. Specifically, Table II indicates that the
`
`determination of which power source will be used to propel the vehicle (the
`
`electric motor, the first engine module, the second engine module, or some
`
`combination thereof), is based on load: “small load,” “medium load,” or “full
`
`load.” Ex. 1002, ¶ 5.
`
`11
`
`
`
`
`
`
`
`
`
`Barske’s control strategy is based on load in the same manner claimed in the
`
`’634 patent. Ex. 1002, ¶ 6. For example, Barske describes mode “a),”
`
`corresponding to Paice’s “low load mode I,” in which the vehicle is propelled by
`
`only the electric motor under conditions of “small load.” Ex. 1002, ¶ 6. Barske also
`
`describes modes “b)” and “d),” corresponding to Paice’s “highway cruising mode,”
`
`in which the vehicle is propelled by only the internal combustion engine (either by
`
`12
`
`
`
`
`
`the first module of the internal combustion engine or both the first module and the
`
`second module of the internal combustion engine) under conditions of “medium
`
`load” or “full load.” Ex. 1002, ¶ 6. Barske describes mode “e),” corresponding to
`
`Paice’s “acceleration mode V,” in which the vehicle is propelled by the internal
`
`combustion engine (both the first module and the second module of the internal
`
`combustion engine) and the electric motor for “great acceleration.” Ex. 1002, ¶ 6.
`
`Gray, for example, describes a hybrid vehicle, in which the control strategy
`
`is based on “road load” in the same manner claimed in the ’634 patent. Ex. 1002, ¶
`
`7. For example, Gray describes an operating mode (“mode 4”), corresponding to
`
`Paice’s “low load mode I,” in which the vehicle is propelled by only the electric
`
`motor under conditions of “small road load.” Gray, 9:12-17; Ex. 1002, ¶ 7. Gray
`
`also describes an operating mode (“mode 2”), correspondence to Paice’s “highway
`
`cruising mode IV,” in which the vehicle is propelled by only the internal
`
`combustion engine under conditions where the engine is operated “within the range
`
`of optimal efficiency.” Gray, 8:52-63; Ex. 1002, ¶ 7. Gray further describes an
`
`operating mode (“mode 1”), corresponding to Paice’s “acceleration mode V,” in
`
`which the vehicle is propelled by both the internal combustion engine and the
`
`electric motor under conditions where demand is “greater than that deliverable at
`
`optimum efficiency by the engine.” Gray, 8:40-51; Ex. 1002, ¶ 7.
`
`13
`
`
`
`
`
`Vittone, for example, also describes a parallel hybrid vehicle featuring an
`
`electronic control unit which implements the “working strategies of the vehicle” by
`
`activating the two drive trains in hybrid drive: the electric motor and thermal
`
`engine. Vittone, 463-465; Ex. 1002, ¶ 8. Vittone describes that one of the
`
`objectives of the hybrid drive is “to introduce only the electric traction in the
`
`phases in which the thermal engine would be requested to work in low efficiency
`
`conditions.” Vittone, 464; Ex. 1002, ¶ 8.
`
`A. Claims 215, 226, 227, 229, 230, 240, 241, 252, 253, 255, 256, 259, and
`266, are Obvious in View of Barske, Gray, and Vittone
`
`Barske is described above, and was not cited during the prosecution of the
`
`’634 patent, or during any review of the ’634 patent before the Board.
`
`As noted above, during the original prosecution of the ’634 patent the
`
`Examiner determined that Gray describes: determining instantaneous road load,
`
`operating an electric motor to propel a vehicle when the road load is below a
`
`setpoint, operating an engine to propel the vehicle when the road load is between a
`
`setpoint and a maximum torque output (MTO), wherein the engine is operable to
`
`efficiently produce torque above the setpoint, and wherein the setpoint is
`
`substantially less than the MTO, and operating the motor and engine when the road
`
`load is greater than the MTO. August 8, 2006 Office Action, 4-5. Gray has not
`
`been presented to the Board in any previous petition for inter partes review of the
`
`’634 patent.
`
`14
`
`
`
`
`
`Gray describes a parallel hybrid powertrain vehicle including a primary
`
`engine and a power storage device. Ex. 1002, ¶ 9. The engine may be an internal
`
`combustion engine, and the power storage device may be a combined storage
`
`battery and electric motor. Gray, 3:13-39; Ex. 1002, ¶ 9. As illustrated in Figures
`
`2A-2D, Gray describes a system for controlling which power source will drive the
`
`vehicle, based on “road load,” the very same hybrid operating strategy that Paice
`
`has described as a “[c]ompletely new idea” and absent from the prior art. Gray,
`
`8:35-9:16, Figs. 2A-2D; Ex. 1002, ¶ 9; see e.g. Aug. 3, 2015 IPR2014-00570,
`
`Paper 43, 40:12-14; Aug. 11, 2016, IPR2015-00787, Paper No. 34, 47:4-9; August
`
`11, 2016, IPR2015-00785, Paper No. 30, 58:15-18.
`
`According to Gray, “[t]he load placed on the engine any at any given instant
`
`is directly determined by the total road load at that instant, which varies between
`
`extremely high and extremely low load.” Gray, 1:31-34; Ex. 1002, ¶ 9. Gray
`
`discloses that control of the hybrid propulsion system is provided for by, for
`
`example, “a torque (or power) demand sensor for sensing torque (or power)
`
`demanded of the vehicle by the driver.” Gray, 3:43-49; Ex. 1002, ¶ 9. Depending
`
`upon the road load, Gray switches between operating modes in the same manner as
`
`claimed in the ’634 patent, as described in more detail below. Ex. 1002, ¶ 9.
`
`Vittone was not cited during the original prosecution of the ’634 patent.
`
`Vittone was cited to the Board by the Petitioner (Ford Motor Company) in
`
`15
`
`
`
`
`
`IPR2015-00787 and IPR2015-00801. In IPR2015-00787, the Board found claims
`
`241, 252, 253, 255, 256, and 259 obvious in view of U.S. Patent No. 5,789,882
`
`(“Ibaraki ’882”) and Vittone. In IPR2015-00801, the Board found claims 241 and
`
`266 obvious in view of Severinsky ’970, Vittone, and U.S. Patent No. 5,632,104
`
`(“Suga”).
`
`The question of whether claims 215, 226, 227, 229, 230, 240, 241, 252,
`
`253, 255, 256, 259, and 266 are obvious in view of Barske, Gray, and Vittone has
`
`never been presented to the Board.
`
`
`
`1. Independent Claims 215 and 241
`
`Barske describes a parallel hybrid vehicle, having an internal combustion
`
`engine, an electric motor, a battery, two modules of the internal combustion engine
`
`and a control procedure that makes it possible to “use the engine modules and the
`
`electric motor in an optimum manner.” Ex. 1002, ¶ 10.
`
`Gray describes a hybrid control system that relies on the determined “road
`
`load” for controlling the application of power from the engine and/or the electric
`
`motor to drive the vehicle. Ex. 1002, ¶ 11.
`
`Barske and Gray describe the limitation that was the basis for allowance of
`
`claim 215, “regeneratively charging a battery of the hybrid vehicle when
`
`instantaneous torque output of the engine>the RL, when the RL is negative, and/or
`
`when braking is initiated by an operator of the hybrid vehicle,” and Vittone
`
`16
`
`
`
`
`
`describes the limitation that was the basis for allowance of claim 241, “controlling
`
`the engine such that combustion of fuel within the engine occurs substantially at a
`
`stoichiometric ratio, wherein said controlling the engine comprises limiting a rate
`
`of change of torque output of the engine; and if the engine is incapable torque
`
`required to propel the of supplying instantaneous hybrid vehicle, supplying
`
`additional torque from the at least one electric motor.”
`
`i. Barske, Gray, and Vittone describe a method for
`controlling a hybrid vehicle (Claims 215, 241)
`
`Barske describes a parallel hybrid vehicle, having an internal combustion
`
`engine, an electric motor, a battery, two modules of the internal combustion engine
`
`and a control procedure that makes it possible to “use the engine modules and the
`
`electric motor in an optimum manner.” Barske, 8, 10:5-13; Ex. 1002, ¶ 12.
`
`Gray also describes a parallel hybrid drive system, having an internal
`
`combustion engine, a storage battery, and an electric motor. Gray, 3:13-39; Ex.
`
`1002, ¶ 13. Gray describes operating the engine near peak efficiency by adding
`
`load or adding power as needed, according to the road load as illustrated in Figures
`
`2A-2D. Gray, 4:61-67, 8:35-9:16; Ex. 1002, ¶ 13.
`
`Vittone also describes a parallel hybrid vehicle featuring an electronic
`
`control unit which implements the “working strategies of the vehicle” by activating
`
`the two drive trains in hybrid drive: the electric motor and thermal engine. Vittone,
`
`463-465; Ex. 1002, ¶ 14. Vittone describes that one of the objectives of the hybrid
`17
`
`
`
`
`
`drive is “to introduce only the electric traction in the phases in which the thermal
`
`engine would be requested to work in low efficiency conditions.” Vittone, 464; Ex.
`
`1002, ¶ 14.
`
`ii. Barske, Gray, and Vittone describe determining the
`instantaneous road load (RL) required to propel the
`hybrid vehicle responsive to an operator command
`(Claims 215, 241)
`
`According to Barske, an electric motor and two modules of an internal
`
`combustion engine are managed “in an optimum manner.” Barske, 8; Ex. 1002, ¶
`
`15. For example, under “small load,” the electric motor propels the vehicle; under
`
`“medium load,” the first module of the engine propels the vehicle; under “full
`
`load,” both modules of the engine propel the vehicle; and during “acceleration” or
`
`“great acceleration,” the electric motor and the engine propel the vehicle. Barske,
`
`8; Ex. 1002, ¶ 15.
`
`Gray describes determining the instantaneous road load required to propel
`
`the vehicle, responsive to operator command. Ex. 1002, ¶ 16. Gray describes that
`
`engine load is directly determined by road load. Gray, 1:31-35 (“The load placed
`
`on the engine at any given instant is directly determined by the total road load at
`
`that instant, which varies between extremely high and extremely low load.”); Ex.
`
`1002, ¶ 16. Figures 2A-2D illustrate different modes of applying power from the
`
`engine and/or motor, according to road load. Ex. 1002, ¶ 16.
`
`18
`
`
`
`
`
`
`iii. Barske, Gray, and Vittone describe operating at least
`one electric motor to propel the hybrid vehicle when
`the RL required to do so is less than a setpoint (SP)
`(Claims 215, 241)
`
`According to Barske, an electric motor and two modules of an internal
`
`combustion engine are managed “in an optimum manner.” Barske, 8; Ex. 1002, ¶
`
`17. For example, under “small load,” the electric motor propels the vehicle.
`
`Barske, 8; Ex. 1002, ¶ 17.
`
`Gray describes “mode 4,” shown in Fig. 2D and corresponding to Paice’s
`
`“low-load mode I,” in which “an unusually small road load is experienced.” Gray,
`
`9:11-12; Ex. 1002, ¶ 18. Under these conditions, “the engine cannot deliver such a
`
`small amount of power at acceptable efficiency,” and “the pump/motor 7 (acting as
`
`a motor) provides power by itself.” Gray, 9:12-16, Fig. 2D; Ex. 1002, ¶ 18.
`19
`
`
`
`
`
`
`iv. Barske, Gray, and Vittone describe operating an
`internal combustion engine of the hybrid vehicle to
`propel the hybrid vehicle when the RL required to do
`so is between the SP and a maximum torque output
`(MTO) of the engine, wherein the engine is operable
`to efficiently produce torque above the SP, and
`wherein the SP is substantially less than the MTO
`(Claims 215, 241)
`
`According to Barske, an electric motor and two modules of an internal
`
`combustion engine are managed “in an optimum manner.” Barske, 8; Ex. 1002, ¶
`
`19. For example, under “medium load,” the first module of the engine propels the
`
`vehicle. Barske, 8; Ex. 1002, ¶ 19. Further, under “full load,” both modules of the
`
`engine propel the vehicle. Barske, 8; Ex. 1002, ¶ 19.
`
`Gray describes “mode 2,” shown in Fig. 2B and corresponding to Paice’s
`
`“highway cruising mode IV,” in which a road load is within the range of optimal
`
`efficiency of the engine (between levels A and B), and the engine drives the
`
`vehicle alone. Gray, 8:52-63 (“[W]hen power demanded of engine 1 is within the
`20
`
`
`
`
`
`range of optimum efficiency … all of the power is provided by the engine 1.”),
`
`Fig. 2B; Ex. 1002, ¶ 20.
`
`
`
`Gray describes an efficient range of the engine between power levels A and
`
`B of Figures 2A-2D. Ex. 1002, ¶ 21. Point A (corresponding to the claimed
`
`setpoint) is the low end of the range of optimum efficiency and substantially less
`
`than point B (corresponding to the claimed maximum torque output). Gray, 8:35-
`
`39, Fig. 2B; Ex. 1002, ¶ 21.
`
`Before the earliest filing date claimed on the face of the ’634 patent, a
`
`person of ordinary skill in the art would have found it obvious for the torque output
`
`at the setpoint (point A) to be substantially less than the MTO (point B) of the
`
`engine. During prosecution of a similar limitation in the parent ’347 patent, the
`
`Applicant conceded that this limitation is not “mathematically precise,” but argued
`
`21
`
`
`
`
`
`that the application describes examples minimum torque values of “typically at
`
`least 30% of MTO” and “normally not in excess of 50% of MTO.” February 22,
`
`2005 Amendment, at 15 (Ex. 1009). As described by the ’634 patent, Severinsky
`
`’970 describes that an internal combustion engine is “substantially” more efficient
`
`when operated at torque output levels of at least 35% of MTO. At this level, the
`
`engine propels the vehicle, while below this level, the motor propels the vehicle.
`
`Ex. 1001, 25:4-15. At least 35% of peak torque is within the range cited by the
`
`Applicants as examples of torque values “substantially less” than MTO. Further,
`
`referring to Severinsky ’970, it was also known that the efficient operational point
`
`of an internal combustion engine “produces 60-90% of its maximum torque
`
`whenever operated” Severinsky ’970, 20:63-67. As neither the claims, nor the
`
`specification, of the ’634 patent identifies torque values that define “substantially
`
`less” than MTO, these values, wh