`
`______________________
`
`BEFORE THE PATENT TRIAL AND APPEAL BOARD
`
`______________________
`
`RUBICON COMMUNICATIONS, LP
`
`Petitioner,
`
`v.
`
`LEGO A/S
`
`Patent Owner.
`
`________________________
`
`Case IPR2016-01187
`
`Patent 8,894,066
`
`DECLARATION OF DR. JAY P. KESAN
`
`Rubicon Communications, LP
`Ex. 1036
`Rubicon Communications, LP v. LEGO A/S
`IPR2016-01187
`
`
`
`Petition for Inter Partes Review of U.S. Patent No. 8,894,066
`
`Declaration of Dr. Jay P. Kesan
`
`
`
`I, Jay Kesan, do hereby declare and state, that all statements made herein of
`
`my own knowledge are true and that all statements made on information and belief
`
`are believed to be true; and further that these statements were made with the
`
`knowledge that willful false statements and the like so made are punishable by fine
`
`or imprisonment, or both, under Section 1001 of Title 18 of the United States
`
`Code.
`
`
`
`
`
`Executed August 30, 2017, in Champaign, IL.
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`____________________
`
`Dr. Jay P. Kesan
`
`1
`
`
`
`INTRODUCTION
`
`I.
`
`1. The facts set forth below are known to me personally and I have
`
`firsthand knowledge of them. I am a U.S. citizen over eighteen years of age. I
`
`am fully competent to testify as to the matters addressed in this Declaration. I
`
`understand that this Declaration is being submitted along with Petitioner’s Reply
`
`in the Inter Partes Review by the Patent Trial and Appeal Board (“PTAB”) for
`
`US Patent No. 8,894,066 (hereinafter, “the ’066 Patent”) in IPR2016-01187.
`
`A. Engagement
`
`2. I have been retained as a technical expert by Petitioner to study and provide my
`
`opinions on the technology claimed in, and the patentability or nonpatentability
`
`of Claims 1-8 of the ’066 Patent.
`
`B. Background and Qualifications
`
`3. I have summarized in this section my educational background, work
`
`experience, and other relevant qualifications. A true and accurate copy of
`
`my curriculum vitae is attached as Exhibit 1037.
`
`4. I am a Professor and H. Ross & Helen Workman Research Scholar at the
`
`University of Illinois at Urbana-Champaign, where I am appointed in the College of
`
`Law, the Department of Electrical and Computer Engineering, the Coordinated
`
`Science Laboratory, and the Information Trust Institute. I have a Ph.D. in Electrical
`
`2
`
`
`
`and Computer Engineering from the University of Texas at Austin and a J.D., summa
`
`cum laude from Georgetown University. I have also worked as a research scientist
`
`at the IBM T.J. Watson Research Center, and I am a named inventor on several
`
`United States patents. I have also served as a technical expert and legal expert in
`
`patent infringement lawsuits. I have been appointed to serve as a Special Master in
`
`patent disputes. Additionally, I have been appointed and served as a Thomas Edison
`
`Distinguished Scholar at the United States Patent and Trademark Office (“USPTO”).
`
`5. From 1984 to 1989, while working on my Master’s and Ph.D. degrees in
`
`electrical and computer engineering at the University of Texas at Austin, I was a
`
`graduate research assistant and I researched and developed RF (radio
`
`frequency) technologies, specifically microwave and millimeter wave devices
`
`and integrated circuits and published my research work extensively in these fields.
`
`From 1989 to 1993, I worked as a research scientist at the IBM T.J. Watson
`
`Research Center, and I researched various exploratory high-speed integrated circuit
`
`technologies for analog and wireless communication applications and published
`
`my research work extensively in these fields. From 2000 to the present, I have
`
`also been working on radio-frequency identification (RFID) technologies and
`
`systems, and I am an inventor on numerous U.S. patents directed at RFID and
`
`related technologies. In the past few years, I have also been working on security
`
`issues and risk assessment in network, cloud, and wired and wireless communication
`
`3
`
`
`
`technologies. From 1998 to the present, I have worked as a consulting expert in
`
`various electrical, communication and computer technologies and intellectual
`
`property protection for such technologies. From 1998 to the present, I have been
`
`involved as a technical expert with numerous patent lawsuits involving
`
`semiconductor and integrated circuits, set-top boxes processing multimedia content,
`
`wireless audio players including control of rendering audio in such equipment, and
`
`various wired, wireless and generations of cellular communication technologies
`
`and their applications.
`
`C. Compensation and Prior Expert Witness Experience
`
`6. I am being compensated for the time I spend on this case at my normal
`
`consulting rate of $550 an hour. I am also being reimbursed for reasonable
`
`and customary expenses associated with my work and testimony in this
`
`investigation. My compensation is not contingent upon the outcome of this matter
`
`or the substance of my testimony.
`
`7. A complete list of cases in which I have testified at trial, hearing, or by
`
`deposition within the preceding four years is provided in my curriculum vitae,
`
`which is attached as Exhibit 1037.
`
`
`
`
`
`4
`
`
`
`D. Information Considered
`
`8. My opinions are based on my years of education, research and experience, as
`
`well as my investigation and study of relevant materials. In forming my opinions,
`
`I have considered the materials that I identify in this report, including those listed
`
`below:
`
`• Exhibit 1001 – U.S. Patent No. 8,894,066
`
`• Exhibit 1002 – File History of the ’066 Patent
`
`• Paper 1 – Petition for Inter Partes Review of U.S. Patent No. 8,894,066
`
`• Exhibit 1017 – Philo’s Home Page (“Philo”)
`
`• Exhibit 1005 – Building Robots, Chapter 6
`
`• Exhibit 1020 – U.S. Patent Appl. Pub. No. 2002/0196250 (“Anderson”)
`
`• Paper 20 – Patent Owner’s Corrected Preliminary Response
`
`• Exhibit 2006 – Declaration of Elizabeth B. Knight
`
`• Exhibit 2007 – Curriculum Vitae of Elizabeth B. Knight
`
`• Paper 38 – Decision Granting Institution of Inter Partes Review
`
`• Paper 70 – Patent Owner’s Response
`
`• Exhibit 2026 – Declaration of Elizabeth B. Knight
`
`5
`
`
`
`• Exhibit 1038 – Merriam-Webster’s Collegiate Dictionary, “join”
`
`• Exhibit 1039 – Merriam-Webster’s Collegiate Dictionary, “portion”
`
`• Exhibit 1040 – Merriam-Webster’s Collegiate Dictionary, “tactile”
`
`• Exhibit 1041 – U.S. Patent No. 4,242,664
`
`• Exhibit 1042 – U.S. Patent No. 5,508,836
`
`• Exhibit 1043 – Internet Archive capture of Engadget, “Treo 650 is
`
`Official!”
`
`• Exhibit 1044 – U.S. Patent No. 6,219,797
`
`9. I may rely upon these materials and/or additional materials to respond to
`
`arguments raised by the Petitioner. I may also consider additional documents and
`
`information in forming any necessary opinions – including documents that may not
`
`yet have been provided to me.
`
`10. My analysis of the materials produced in this investigation is ongoing and I
`
`will continue to review any new material as it is provided. This declaration
`
`represents only those opinions I have formed to date. I reserve the right to
`
`revise, supplement, and/or amend my opinions stated herein based on new
`
`information and on my continuing analysis of the materials already provided.
`
`
`
`6
`
`
`
`II.
`
`LEGAL STANDARDS
`
`11. In expressing my opinions and considering the subject matter of the claims
`
`of the ’066 Patent, I am relying upon certain basic legal principles that counsel has
`
`explained to me.
`
`12. First, I understand that for an invention claimed in a patent to be found
`
`patentable, it must be, among other things, new and not obvious from what
`
`was known before the invention was made.
`
`13. I understand the information that is used to evaluate whether an invention is
`
`new and not obvious is generally referred to as “prior art” and generally includes
`
`patents and printed publications (e.g., books, journal publications, articles on
`
`websites, product manuals, etc.).
`
`14. I understand that in this proceeding Petitioner has the burden of proving that the
`
`claims of the ’066 Patent are anticipated or obvious in view of the prior art by a
`
`preponderance of the evidence. I understand that “a preponderance of the evidence”
`
`is evidence sufficient to show that a fact is more likely true than it is not.
`
`15. I understand that in this proceeding, the claims must be given their
`
`broadest reasonable interpretation consistent with the specification. The claims
`
`after being construed in this manner are then to be compared to the information
`
`in the prior art.
`
`7
`
`
`
`16. I understand that in this proceeding, the information that may be evaluated
`
`is limited to patents and printed publications. My analysis below compares the
`
`claims to patents and printed publications that are prior art to the claims.
`
`17. I understand that there are two ways in which prior art may render a patent
`
`claim unpatentable. First, the prior art can be shown to “anticipate” the claim,
`
`which I understand requires a single reference to explicitly or inherently disclose
`
`every feature of a claim arranged in the same manner as in the claim. Second, the
`
`prior art can be shown to have made the claim “obvious” to a person of ordinary
`
`skill in the art. I set forth my understanding of the obviousness standard as
`
`follows:
`
`18. I understand that a claimed invention is not patentable if a prior art
`
`reference discloses every element of the claimed invention, either explicitly or
`
`inherently and that those elements must be arranged or combined in the same way
`
`as the claim. I further understand that being arranged or combined in the same way
`
`does not require an identity of terminology.
`
`19. I understand that “prior art” includes patents and printed publications that
`
`existed before the earliest filing date (the “effective filing date”) of the claim in the
`
`patent. I also understand that a patent will be prior art if it was filed before the
`
`effective filing date of the claimed invention, while a printed publication will
`
`8
`
`
`
`be prior art if it was publicly available before that date. I also understand that a
`
`reference qualifies as prior art for an obviousness determination under § 103 only
`
`when it is analogous to the claimed invention.
`
`20. It is my further understanding that a claimed invention is unpatentable if the
`
`differences between the invention and the prior art are such that the subject
`
`matter as a whole would have been obvious at the time the invention was made to
`
`a person having ordinary skill in the art to which the subject matter pertains.
`
`21. I understand that the ultimate conclusion of whether a claim is (non)
`
`obvious should be based upon a determination of several factual considerations:
`
`•
`
`•
`
`•
`
`•
`
`The scope and content of the prior art;
`
`The differences between the prior art and the claims at issue;
`
`The knowledge of a person of ordinary skill in the pertinent art; and
`
`Whatever objective factors indicating obviousness or non-obviousness
`
`may be present in any particular case.
`
`22. I understand that the existence of each and every element of the claimed
`
`invention in the prior art does not necessarily prove obviousness and that most, if
`
`not all, inventions rely on building blocks of prior art. In considering whether a
`
`claimed invention is obvious, I understand that one may find obviousness if at the
`
`time of the claimed invention there was a reason that would have prompted a
`
`9
`
`
`
`person having ordinary skill in the field to combine the known elements in a way
`
`the claimed invention does, taking into account such factors as (1) whether the
`
`claimed invention was merely the predictable result of using prior art elements
`
`according to their known function(s); (2) whether the claimed invention provides
`
`an obvious solution to a known problem in the relevant field; (3) whether the prior
`
`art teaches or suggests the desirability of combining elements claimed in the
`
`invention; (4) whether the prior art teaches away from combining elements in the
`
`claimed invention; (5) whether it would have been obvious to try the combinations
`
`of elements, such as when there is a design need or market pressure to solve a
`
`problem and there are a finite number of identified, predictable solutions; and (6)
`
`whether the change resulted more from design incentives or other market forces. I
`
`understand that to find it rendered the invention obvious, one must find that the
`
`prior art provided a reasonable expectation of success and that each claim must be
`
`considered separately.
`
`23. I understand that one should not use hindsight when considering
`
`obviousness. I also understand that in assessing obviousness, that one should take
`
`into account any objective evidence (sometimes called “secondary considerations”)
`
`that may have existed at the time of the invention and afterwards that may shed light
`
`on the obviousness or not of the claimed invention, such as: (a) Whether the
`
`invention was commercially successful as a result of the merits of the claimed
`
`10
`
`
`
`invention (rather than the result of design needs or market-pressure advertising or
`
`similar activities); (b) Whether the invention satisfied a long-felt need; (c) Whether
`
`others had tried and failed to make the invention; (d) Whether others invented the
`
`invention at roughly the same time; (e) Whether others copied the invention; (f)
`
`Whether
`
`there were changes or
`
`related
`
`technologies or market needs
`
`contemporaneous with the invention; (g) Whether the invention achieved
`
`unexpected results; (h) Whether others in the field praised the invention; (i) Whether
`
`persons having ordinary skill in the art of the invention expressed surprise or
`
`disbelief regarding the invention; (j) Whether others sought or obtained rights to the
`
`patent from the patent holder; and (k) Whether the inventor proceeded contrary to
`
`accepted wisdom in the field.
`
`III. OVERVIEW OF THE PATENT
`
`24. Patent Owner contends that the ’066 Patent “claims methods for creating a
`
`user-designed controller for manipulating displayed images or symbols during play
`
`activity.” Patent Owner’s Response (“Response”) at 2 (emphasis added). In my
`
`opinion, this characterization does not clearly reflect the ’066 Patent’s purported
`
`inventive contribution.
`
`25. Specifically, the ’066 Patent does not purport to have invented a “controller”
`
`per se. Indeed, in its “Background Information” section, the ’066 Patent
`
`acknowledges that a “prevalent type of manual controller comprises a control
`
`11
`
`
`
`section having a plurality of buttons that the user presses to enter commands and
`
`hand grips that the user holds when the user operates the manual controller.” ’066
`
`Patent at 1:43-47. More generally, the ’066 Patent acknowledges that existing
`
`manual controllers include “joysticks” and “game pads,” among other devices. Id.
`
`at 1:38-40. That is, as the ’066 Patent acknowledges, many types of “controllers”
`
`were known in the prior art.
`
`26. Patent Owner states that the ’066 Patent “explicitly claims one of the two
`
`embodiments” described in the specification: the embodiment illustrated in Fig. 1,
`
`which is reproduced below. Response at 2-3.
`
`
`
`12
`
`
`
`27. As Fig. 1 shows, the controls within housing 14 are separate from the casing 16
`
`that receives housing 14. Unlike the second preferred embodiment of Fig. 4, which
`
`the ’066 Patent acknowledges is “built around a remote controller in the form of a
`
`Wii™ remote controller,” 5:6-9, the ’066 Patent does not acknowledge the origin of
`
`the illustrated controls. However, in my opinion, these controls bear more than a
`
`passing resemblance to other prior art controllers such as the PlayStation 2
`
`controller.
`
`28. When considering Fig. 1 in conjunction with the controllers that the ’066 Patent
`
`considers to be prior art and with claim 1, it is my opinion that the ’066 Patent is
`
`not directed to a “user-designed controller,” as Patent Owner states. Rather, the
`
`’066 Patent is directed to a customizable casing for a controller. Specifically, claim
`
`1 recites “providing a main casing configured to conformably fit around . . . [and]
`
`receive the housing of the controller,” and further “providing” building elements
`
`“configured for a user to build on the patterned surface portion of the main casing”
`
`(emphasis added).
`
`29. That is, in my opinion, the ’066 Patent is not directed to “methods for creating
`
`a user-designed controller,” as Patent Owner asserts. Rather, it is the provided
`
`“casing” that, via its patterned surface, facilitates expression of the user’s creative
`
`preferences, and is the focus of the embodiment to which the ’066 Patent is
`
`directed. The “controller” itself that is “received”—many instances of which are
`
`13
`
`
`
`acknowledged as prior art by the ’066 Patent—is in my estimation merely an object
`
`or workpiece that is transformed by the claimed method.
`
`IV. CLAIM CONSTRUCTION
`
`A. “casing”
`
`30. Patent Owner has proposed that the claim term “casing” be construed to mean
`
`“[a] structure that is separate from and covers one or more surfaces of the housing
`
`of the manual controller.” Response at 8. Patent Owner points to the fact that the
`
`’066 Patent describes casing 16 of Fig. 1 as being “separable” from controller
`
`housing 14. Id. at 9 (quoting ’066 Patent at 3:7-8). I note, however, that the
`
`claims do not include the terms “separable,” “removable,” or similar terms. On its
`
`face, Patent Owner’s proposed construction merely requires the “casing” to be
`
`distinguishable from the “housing.”
`
`31. I note that with respect to Patent Owner’s Preliminary Response, the Board
`
`found that Patent Owner failed to provide “reasoning or evidence to explain why a
`
`structure inseparably attached to a housing cannot constitute a ‘casing configured
`
`to conformably fit around a portion of the exterior surface of and thereby receive
`
`the housing.’” Institution Decision at 11. I agree with the Board’s position and
`
`note that nothing in Patent Owner’s Response or the intrinsic record of the ’066
`
`14
`
`
`
`Patent precludes an inseparably attached “casing” from nevertheless being
`
`“separate” (i.e., distinguishable) from the “housing” to which it is attached.
`
`32. In particular, I note that a “casing” that is separate and distinguishable from a
`
`“housing” prior to assembly of the casing and housing does not cease to be
`
`“separate and distinct” (in Patent Owner’s words) even if the two are inseparably
`
`assembled. Consider again the embodiment of Fig. 1 of the ’066 Patent. As Patent
`
`Owner notes, the ’066 Patent characterizes the illustrated casing as being
`
`“separable” from the housing. Response at 9. Suppose that spot amounts of
`
`adhesive were applied to housing 14 of Fig. 1 so that, when inserted into casing 16,
`
`housing 14 became inseparably attached to casing 16. In my opinion, one of
`
`ordinary skill would conclude that once so assembled, casing 16 nevertheless
`
`remains “separate” and distinguishable from housing 14.1
`
`33. Moreover, Patent Owner has asserted that in order for the “casing” to “fit
`
`around” and “receive” the housing as recited in claim 1, it is necessary for the
`
`“casing” and “housing” to be “separate and distinct components.” Response at 10.
`
`
`1 If, hypothetically, inseparable assembly of the housing and casing were
`
`considered to fall outside the scope of the claims, this would be tantamount to
`
`asserting that the embodiment of Fig. 1 would escape infringement if adhesive
`
`were used in the manner proposed above—a conclusion that beggars logic.
`
`15
`
`
`
`But in my view, inseparable assembly does not defeat these aspects of claim 1.
`
`Return to the hypothetical of the previous paragraph, in which housing 14 of Fig. 1
`
`is hypothetically inseparably attached to casing 16. If casing 16 “fit[s] around”
`
`and “receive[s]” housing 14 before the adhesive is set (i.e., at a time when the two
`
`are separable), one of ordinary skill would recognize that it does not cease to do
`
`simply by operation of the adhesive’s curing.
`
`34. Finally, I note that the Board expressed the view that Patent Owner failed to
`
`establish that “casing” and “building elements” cannot overlap in scope, and found
`
`“a reasonable likelihood of Petitioner demonstrating that other building elements
`
`shown in the Brick Simon compose a separately distinguishable ‘casing.’”
`
`Institution Decision at 9-10, 19. I agree that the ’066 Patent does not preclude the
`
`possibility that the “casing” itself could be constructed from “building elements,”
`
`so long as the “building elements” corresponding to such a “casing” are distinct
`
`from the “subset of building elements” that are used to build “a customized replica
`
`of at least a portion of a play item,” as recited in claim 1. Specifically, I note that
`
`claim 1 uses the open-ended transitional term “comprising,” which I understand
`
`permits the claim scope to extend to embodiments that include elements beyond
`
`those specifically recited in the claim. Therefore, claim 1 remains open to the
`
`possibility that the “casing” may be constructed from additional “building
`
`elements.”
`
`16
`
`
`
`B. “conformably fit”
`
`35. Patent Owner proposes that the term “conformably fit” should be construed as
`
`“[j]oining of parts relying on matching forms and dimensions,” and the term
`
`“mating” should be construed as “[j]oining of building element(s) to the patterned
`
`surface using cylindrical bosses and recesses.” Response at 8. The term “join” can
`
`connote that “joined” items are fastened or connected. See Exhibit 1038 (defining
`
`“join” to mean “to put or bring together so as to form a unit” or “to come together
`
`so as to be connected”).
`
`36. However, as discussed above, Patent Owner contends that the claims of the
`
`’066 Patent are directed to the embodiment of Fig. 1. The specification does not
`
`use any terms of fastening or connection, such as “join” or the like, to describe
`
`how housing 14 relates to casing 16. Indeed, as Patent Owner notes, the ’066
`
`Patent indicates that housing 14 and casing 16 can be “separable,” although as
`
`discussed above, the claims do not require this. Response at 9 (quoting ’066 Patent
`
`at 3:7-8). This cuts against any suggestion that “joining” requires “fastening” or
`
`the like.
`
`37. Specifically, Fig. 1 appears to show that housing 14 slides or inserts into
`
`casing 16. Absent further details, one of ordinary skill would understand from Fig.
`
`1 that housing 14 is “joined” to casing 16 by abutment rather than fastening or
`
`connection. That is, to the extent that the claim terms “conformably fit” or
`
`17
`
`
`
`“mating” involve “joining,” joining by abutment would suffice, and fastening,
`
`connection, or linking are not necessary.
`
`C. “manipulate”
`
`38. Patent Owner proposes that the term “manipulate” be construed to mean
`
`“changing in a skillful manner,” relying on a dictionary definition that reads in full,
`
`“to treat or operate with or as if with the hands or by mechanical means especially
`
`in a skillful manner.” Response at 9, 12 (citing Exhibit 2027). I disagree that one
`
`of ordinary skill would interpret “manipulate” in the manner Patent Owner
`
`proposes.
`
`39. First, Patent Owner’s construction focuses only on the part of the definition
`
`that, by its own terms, is optional. One of ordinary skill would understand
`
`“especially in a skillful manner” to connote that, while the definition gives weight
`
`to whether the conduct is “skillful,” conduct that is not “skillful” nevertheless may
`
`fall within the scope of the definition.
`
`40. Second, “skillful” is subjective and a relative term of degree. The
`
`specification does not use the term “skillful” in the context of the controller, much
`
`less provide an ascertainable standard by which it can be evaluated. In short, one
`
`of ordinary skill would find this construction to be unworkable, because it is not
`
`18
`
`
`
`possible to determine from the construction what does or does not fall within the
`
`scope of “changing in a skillful manner.”
`
`41. In my opinion, one of ordinary skill would more correctly understand
`
`“manipulate” to mean “changing with or as if with the hands, or by mechanical or
`
`electronic means.” This construction incorporates the majority of Patent Owner’s
`
`cited dictionary definition while omitting the optional and otherwise problematic
`
`“skillful manner” language. It also comports with the terminology used by the
`
`’066 Patent, which refers to numerous electronic controllers. ’066 Patent at 1:39-
`
`43.
`
`V. ANALYSIS OF GROUND III – PHILO
`
`42. In my opinion, one of ordinary skill would readily identify all of the features of
`
`claim 1 within the Brick Simon model disclosed in Philo. In particular, I disagree
`
`with Patent Owner’s contentions that “Philo do[es] not show any putative casing
`
`configured to conformably bit around a portion of the RCX brick,” and that “no
`
`putative casing is shown to join the RCX brick relying on matching forms and
`
`dimensions, as the flat piece in the Brick Simon page … appears to join the RCX
`
`brick using cylindrical bosses and recesses.” Response at 18-19.
`
`43. Philo’s Brick Simon model includes the RCX brick, which controls game
`
`operation, and is thus a “controller” that is enclosed within a plastic shell, or
`
`“housing,” as shown in the annotated view reproduced below.
`
`19
`
`
`
`
`
`Exhibit 1017 at 10 (annotated). The controller “housing” is mounted and thus
`
`“received” within a “casing.” As shown in this view, the “casing” contacts the left
`
`and bottom sides of the “housing” of the RCX brick.
`
`44. Because the central theme of Philo is constructing models from Lego building
`
`elements, the “casing,” like the remainder of Brick Simon, is formed from Lego
`
`elements. As I stated above at ¶ 34, I agree with the Board’s view that the ’066
`
`Patent does not preclude building a “casing” out of Lego elements, as Philo does.
`
`Not all elements of Brick Simon are part of the “casing,” however. For example,
`
`Philo shows yellow ornamental elements mounted to the surface of the black casing
`
`along with button elements that provide for user input.
`
`20
`
`
`
`45. Philo provides a bottom view of the Brick Simon model, reproduced in
`
`annotated form below.
`
`
`
`
`
`Exhibit 1017 at 12 (annotated). The front surface of the RCX brick, shown on the
`
`right in the view above, appears here in the bottom left corner. As can be seen in
`
`this view, several long black Lego elements secure the bottom surface of the RCX
`
`brick “housing,” forming part of the “casing” that receives and at least partially
`
`surrounds the RCX brick.
`
`21
`
`
`
`46. Philo also provides a view of the right side of the Brick Simon model,
`
`reproduced in annotated form below:
`
`
`
`Exhibit 1017 at 13 (annotated). Here, Philo shows the use of additional vertically-
`
`oriented Lego elements that attach to the black casing element below the RCX
`
`brick. These elements appear to attach to, and at least abut the RCX brick, and
`
`function as further elements of the “casing” that receives the controller “housing.”
`
`47. Based on the foregoing images, it is my view that Philo discloses a “main
`
`casing” that abuts or contacts the “housing” of the RCX brick on at least its bottom,
`
`22
`
`
`
`left, and right sides. I note that the ’066 Patent does not define the term “portion,”
`
`but its use of the term is consistent with its ordinary meaning of “part,” which is a
`
`broad term. Exhibit 1039. I also note that Patent Owner has not proposed a
`
`construction for the term “portion” that would differ from its ordinary meaning.
`
`Accordingly, because several “parts” of the RCX brick are abutted or contacted by
`
`Lego elements forming the “main casing,” it is my opinion that one of ordinary skill
`
`would recognize Philo to disclose a “casing” that fits around a “portion” of the
`
`RCX brick.
`
`48. As discussed above, various Lego elements of the “casing” are mated to the
`
`bottom and right sides of the RCX brick. Patent Owner has conceded the “mating”
`
`of Lego elements “could constitute one way to conformably fit.” Response at 11.
`
`Accordingly, by Patent Owner’s own terms, the “casing” of Brick Simon
`
`“conformably fits” the RCX brick wherever it is actually mated to the RCX brick.
`
`49. The left side of the RCX brick appears, at a minimum, to abut the “casing” of
`
`Brick Simon, although it is unclear whether it is “mated” in a manner similar to
`
`other surfaces of the RCX brick. Nevertheless, as I argued above at ¶ 37, joining by
`
`abutment is sufficient to “conformably fit.” Viewed holistically, there is no
`
`apparent gap between the left side (or, for that matter, the bottom side) of the RCX
`
`brick and the elements of the “casing.” Moreover, the RCX brick aligns flush with
`
`the “casing” such that it does not protrude or recede relative to the “casing.”
`
`23
`
`
`
`Accordingly, the “casing” of Brick Simon is joined to the “housing” of the RCX
`
`brick “relying on matching forms and dimensions,” and thus “conformably fits”
`
`according to Patent Owner’s proposed construction.
`
`50. Importantly, the “casing” of Brick Simon “conformably fits” at least to the
`
`same extent as the embodiment of Fig. 1 of the ’066 Patent. That is, Patent Owner
`
`argues that the claims of the ’066 Patent are directed to the embodiment of Fig. 1.
`
`Response at 2-3. If Patent Owner’s assertion is true, then the “casing” of Fig. 1
`
`must “conformably fit” the illustrated “housing.” I see no credible reason why one
`
`of ordinary skill, given Fig. 1 as an example of “conformably fitting,” would
`
`conclude that this feature is absent from Philo’s Brick Simon.
`
`51. Separately, Patent Owner contends that “Philo does not disclose any
`
`manipulation of images or symbols,” and that “[a]t most, Philo indicates that
`
`numbers are displayed, without any ‘manipulating’ or change by the user.”
`
`Response at 20. I disagree. Patent Owner appears to have overlooked Philo’s
`
`discussion of how a game is initialized by Brick Simon, which is described in
`
`detail in Exhibit 1017 at 12 and quoted in the Petition at 26.
`
`52. These passages state: “Brick Simon will first ask for the play difficulty level.
`
`RCX LCD shows a walking 1234 pattern, waiting for a key to be pressed”; once
`
`selected, “[t]he chosen difficulty level is then displayed as 1111, 2222, 3333 or
`
`4444” and play begins. That is, Brick Simon first displays a pattern of numbers,
`
`24
`
`
`
`which are inherently alphanumeric symbols. This “walking 1234 pattern” serves
`
`as a prompt for the user to decide which of four difficulty levels to choose. As
`
`Philo states, the blue, red, yellow, and green keys respectively correspond to levels
`
`1-4. Exhibit 1017 at 12. When the user enters the selected difficulty level by
`
`pressing a particular key, Brick Simon confirms the user’s choice by changing the
`
`display from the “walking 1234 pattern” to the number corresponding to the
`
`chosen difficulty level.
`
`53. That is, the initially displayed “walking 1234 pattern” changes in response to
`
`the user’s keypress that selects the entered difficulty level. Manual action by the
`
`user directly results in a change to the digits displayed by the RCX brick. One of
`
`ordinary skill would readily recognize from this description that the digits or
`
`“symbols” displayed by the RCX brick are “chang[ed] with or as if with the hands,
`
`or by mechanical or electronic means,” and are thus “manipulated” when that term
`
`is properly construed as proposed above.
`
`54. Regarding claim 4, Patent Owner mistakenly asserts that “Philo does not
`
`describe that touch sensors produce signals for manipulating images or symbols.”
`
`Response at 22. As shown in the three images reproduced above, Brick Simon
`
`includes four different-colored keys that are its primary interface for user input.
`
`The purpose of keys is to be pressed, and indeed Philo illustrates an actual
`
`keypress occurring in the image reproduced above at ¶ 46.
`
`25
`
`
`
`55. When pressed, Brick Simon’s keys communicate input to the RCX brick. For
`
`example, as discussed above at ¶¶ 52-53, during initialization, keypresses cause
`
`manipulation of the symbol patterns displayed on the RCX brick in order to
`
`confirm the user’s selected difficulty level. The ordinary meaning of “tactile”
`
`relevant to the context of the ’066 Patent is “of, [or] relating to … the sense of
`
`touch.” Exhibit 1040. Because a keypress invol