Curriculum Vitae: Reza S. Abhari
`
`Biographical Summary:
`
`Dr. Reza S. Abhari is professor of Energy Technologies at ETH
`Zurich, Switzerland. He is the Head of the Laboratory for
`Energy Conversion (LEC) at ETH Zurich (www.lec.ethz.ch).
`Established in 1892 with about 70 to 80 highly qualified students
`and staff researchers, LEC is involved in fundamental and
`applied research and education related to technology and
`economics of turbomachinery, gas turbine technology, wind
`energy, power generation systems, aerospace, and
`semiconductor industries.
`
`
`
`Reza Abhari is a member of the Swiss National Academy of Engineering Sciences (www.satw.ch).
`He is also a Fellow of American Society of Mechanical Engineers (ASME), as well as the recipient
`of many scientific awards, including election as the Christensen Fellow of St Catherine’s College,
`Oxford University in 2010. He was a speaker and the Chairman of the Forum on Innovation on
`energy system in the 2010 World Future Energy Summit in Abu Dhabi.
`
`He is the author/co-author of over 250 scientific articles and journal publications. He is currently or
`has been in the past a member of a number of scientific editorial boards, including the Editorial
`Board of Journal of Power and Energy. He was also a member of advisory committee at NASA
`Glenn Research Centre as well as the Swiss Representative on the Board of ISABE.
`
`• Member of Supervisory Board of PNE Wind AG (PNE3.DE), a publicly traded company and
`a leader in wind energy development with headquarters in Germany. (2008- 2015), In
`addition, Chairman of Audit Committee (2009- 2015)
`
`• Member and Vice-Chairman of Supervisory Board of First Climate AG, a global leader in
`carbon asset development (2008- 2013)
`
`• Member of Board of Directors of ASME International Gas Turbine Institute (IGTI), (2004-
`2010)
`
`•
`
`Interim Senior Vice President of Engineering and Manufacturing in an Italian optical system
`company. (While on sabbatical leave in 2006)
`
`• Management and technology consulting activities for a number of multi-national
`corporations in Europe, USA and Japan.
`
`• Has been in the past and present involved as a founder, director or early stage team
`member in a number of start-up companies in the past 20 years.
`
`• Contributing professor to the Renewable Energy Management (REM) program at University
`of St Gallen executive business school (2011- present)
`
`• Created and responsible for “New Enterprises for Engineers” at ETH Zurich. This course
`introduces and supports multiple teams of 40 Masters and PhD graduate students per year
`from all the engineering and science departments in their pursuit of the establishment of a
`technologically focused start up. (http://www.nefe.ethz.ch)
`
`page 1/24
`
`
`
`
`
`GE-1004.001
`
`

`
`Education
`
`
`1991 PhD in Aeronautics and Astronautics, Massachusetts Institute of Technology
`
`1984 BA (First Class Honors), MA, Engineering Science, Oxford University
`
`Professional Career:
`
`ETH Zurich, Switzerland
`
`
`1999 – present Full Professor of Aerothermodynamics Director, Laboratory for Energy
`Conversion
`
`
`2011 – 2014
`
`2005 – 2010
`
`2003 – 2005
`
`2001 – 2003
`
`
`
`Head, Institute of Energy Technology
`
`Delegate of the Rector Academic and Career Advisory Program, ACAP
`
`Department Head, Department of Mechanical and Process Engineering
`
`Head, Institute of Energy Technology
`
`Associate Professor of Aeronautical Engineering Department (with Tenure),
`joint appointment with Mechanical Engineering Department
`
`Assistant Professor of Aeronautical Engineering Department (tenure track),
`joint appointment with Mechanical Engineering Department
`
`Associate Director, Gas Turbine Laboratory
`
`The Ohio State University, Columbus, Ohio, USA
`
`
`1997 – 1999
`
`
`1995 – 1997
`
`
`1995 – 1999
`
`
`
`Calspan Advanced Technology Center, Buffalo, NY, USA
`
`
`1994 – 1995
`
`Section Head, Propulsion and Energy Research
`
`
`Textron Lycoming, Stratford, CT, USA
`
`
`1991 – 1994
`
`Senior Research and Development Engineer
`
`
`MIT, Cambridge, MA, USA
`
`
`1985 – 1990
`
`Research Assistant
`
`
`Engineering Department, Oxford University, Oxford, England
`
`
`page 2/24
`
`Research Engineer
`
`1984 – 1985
`
`
`
`
`
`
`
`GE-1004.002
`
`

`
`Research
`Fundamental and applied fluid dynamics and thermodynamics, turbomachinery
`aerothermodynamics, wind energy, fluid-structure interaction, numerical simulation,
`experimental techniques, measurement technology, plasma science and engineering.
`
`
`Teaching and Supervision
`Supervision of a total of over 300 Semester and Masters projects as well as 30 PhD theses in
`applied fluid dynamics, propulsion, turbomachinery, power generation, instrumentation,
`modeling, cycle analysis, wind energy, and plasma science. Responsible for teaching courses
`in Applied Thermodynamics, Aerospace Propulsion, Turbomachinery Design, Gas Turbine
`Mechanics and Dynamics, Wind Energy, New Enterprises for Engineers.
`
`
`Conference Organization and selected Keynotes:
`
`
`2014
`
`2014
`
`
`2014
`
`2014
`
`2013
`
`2013
`
`2013
`
`2013
`
`2011
`
`2010
`
`2009
`
`2006 – 2007
`
`2006
`
`2005 – 2006
`
`2005
`
`2003
`
`Keynote speaker ESC Swiss grid dialogue, Zurich, Switzerland
`
`Presentation to Polish Congressional committee on energy and environment,
`Warsaw, Poland
`
`Panel speaker, Frankfurt International Finance group, Germany
`
`Keynote speaker, Lublin, Poland
`
`Keynote speaker, Innoasia 2013, Hong Kong
`
`Opening Plenary Session Speaker, 8th Energy Forum,‘ EU Energy Policy: in
`Search of a Compromise’, Sopot, Poland
`
`Plenary Session Speaker, The New Industry Congress 2013, October 16-17,
`Warsaw, Poland
`
`Plenary Session Speaker, Financial Times (FT) Renewable Summit, London,
`England
`
`Keynote Speaker, Japanese International Gas Turbine Conference (IGTC),
`Osaka, Japan
`
`Keynote Speaker, 1st Asian Gas Turbine Conference, Seoul, South Korea
`
`Keynote Speaker, AIAC, Ankara, Turkey
`
`Chair of Conferences, ASME IGTI TE07
`
`Keynote Speaker, Minnowbrook Conference on Unsteady Flows, Syracuse
`
`Review Chair, ASME IGTI Turbo Expo 2005 Conference in Barcelona, Spain.
`
`Keynote Speaker, 1st Asia Conference on Gas Turbine (ACGT), Seoul, Korea
`
`Co-Chairman, Minnowbrook Conference on Unsteady Flows in
`Turbomachines, Syracuse University, USA
`
`
`
`
`page 3/24
`
`GE-1004.003
`
`

`
`2003
`
`1997 – 1998
`
`1996 – 1998
`
`Technical Program Chair, ASME IGTI Turbo Expo 2004 in Vienna, Austria
`
`Point of Contact, IGTI Heat Transfer Committee, Stockholm, Sweden
`
`Session Organizer, IGTI Conferences
`
`
`
`Honors and Awards
`
`2014
`
`R. Tom Sawyer Award of ASME
`inscription: ‘For significant contributions to the gas turbine industry in both the
`U.S. and Europe, and for exemplary service to the IGTI’
`
`Wind Energy Committee, IGTI, Best Paper Award
`
`Steam Turbine, IGTI, Best Paper Award
`
`Structures & Dynamics, IGTI, Best Paper Award
`
`Measurement Science and Technology Journal, Outstanding Paper in Fluid
`Mechanics for 2008
`
`Controls, Diagnostics & Instrumentation, IGTI, Best Paper Award
`
`Member, Swiss National Academy of Engineering Sciences (SATW)
`
`Fellow, ASME
`
`ASME-K14 Gas Turbine Heat Transfer, Best Paper Award
`
`MIT Enterprise Forum Award
`
`ATV Scholar, St. Catherine’s College, Oxford
`
`
`2013.
`
`2011
`
`2009
`
`2008
`
`
`2008
`
`2007
`
`2001
`
`1993
`
`1989
`
`1981 – 1984
`
`
`SERVICE TO PROFESSIONAL SOCIETIES
`
` •
`
` Member of Board of Directors of ASME International Gas Turbine Institute (GTI) (2004 – 2010)
`
`• Swiss National delegate, Board of International Society of Airbreathing Engines (2005 to Present)
`
`• Member of the International Scientific Advisory Committee of Japanese Gas Turbine Society
`
`• Member of the International Scientific and Program Committee of Conference on Modeling Fluid
`Flow, Budapest, Hungary.
`
`• Associate Editor of Journal of Turbomachinery (1999- 2004)
`
`• Editorial Board, Journal of Power and Energy, (2001- 2006)
`
`
`
`
`page 4/24
`
`GE-1004.004
`
`

`
`•
`
`•
`
`IGTI, Chair of Turbomachinery Committee (2001 – 2003)
`
`IGTI, Vice-Chair of Turbomachinery Committee (1999 – 2001)
`
`• ASME National Nominating Committee (NNC), (1999- 2001)
`
`• ASME NNC, Second Alternate member (98- 99)
`
`IGTI Heat Transfer Committee, Point of Contact, Stockholm (97-98)
`
`• ASME Central Ohio Section, Industrial Liaison, (1996-1997)
`
`IGTI conferences, Session Organizer, (1996, 1997 & 1998).
`
`IGTI Turbomachinery Committee, Member (1995 – Present)
`
`• AIAA Student Advisor, Ohio State University (1996 -1999)
`
`• ASME Student Advisor, student section of ASME in Switzerland (2002- 2004)
`
`• Gas Turbine Heat Transfer (K14) Committee, Member (1992 – Present)
`
`
`•
`
`•
`
`•
`
`
`OTHER PROFESSIONAL SERVICE
`
` •
`
` Expert witness on energy related technologies for a number of legal proceedings and arbitral
`tribunals
`
`• Committee member, Engineering Science Department Review for the Educational Policy and
`Standards Committee (EPSC) of Oxford University (2002)
`
`• Member, Swiss peer review committee responsible for the evaluation of Mechanical Engineering
`program at the Horw University of Applied Sciences, Luzern, Switzerland. (2001)
`
`• Organizer and Group Leader, “ETH-Industry Dialog for Future” (2001)
`
` “ETH-Industry Dialog for Future” (2001, 2002)
`
`• Steering Committee Member of GUIde (US Government, University, Industry) (1992 – 1994).
`
`•
`
`
`
`
`
`page 5/24
`
`GE-1004.005
`
`

`
`PUBLICATIONS: Reza S. Abhari
`
`2015
`1.
`
`
`2.
`
`
`3.
`
`
`4.
`
`Bosdas I., Mansour M., Kalfas A., Abhari R., Senoo S., “Unsteady Steam Flow Field
`Measurements in the Last Stage of Low Pressure Steam Turbine”, ASME Turbo Expo 2015,
`GT 2015-43504 (2015)
`
`Dimitrova E., Vinklers J., Chokani N., Abhari R.S., “Integrated Biomass Assessment and
`Optimized Power Generation”, Energy Technology, Vol. 3, No. 3 (2015-03)
`
`Eser P., Singh A., Chokani N., Abhari R.S., “High Resolution Simulations of Increased
`Renewable Penetration on Central”, European Transmission Grid, Proc. of IEEE (2015)
`
`Frau E., Kress Ch., Chokani N., Abhari R.S., “Comparison of performance and unsteady
`loads of multimegawatt downwind and upwind turbines”, Journal of Solar Energy
`Engineering, Vol. 137, No. 4 (2015-08)
`
`
`5. Gambino N., Rollinger B., Hudgins D., Abhari R.S., “Spectral emission properties of a laser-
`produced plasma light source in the sub-200 nm range for wafer inspection applications”,
`Journal of Micro/Nanolithography MEMS and MOEMS, Vol. 14, No. 3 (2015-08)
`
`
`6. Gambino N., Rollinger B., Hudgins D., Abhari R.S., Abreau F., “Spectral emission properties
`of a LPP light source in the sub-200nm range for wafer inspection applications”, Metrology,
`Inspection, and Process Control for Microlithography XXIX, Vol. 9424 (2015-03)
`
`
`7. Giovannini A., Abhari R.S., “Rarefied flow expansion in linear aerospikes”, Physics of Fluids,
`Vol. 27, No. 6
` (2015-06)
`
`
`8. Giovannini A., Barendregt I., Haslinde T., Hubbs Ch., Abhari R.S., “Self-confined plasma in a
`magneto-plasma compressor and the influence of an externally imposed magnetic field”,
`Plasma Sources Science and Technology, Vol. 24, No. 2 (2015-02)
`
`
`9. Giovannini A., Gambino N., Rollinger B., Abhari R.S., “Angular ion species distribution in
`droplet-based laser-produced plasmas”, J. of Applied Physics, Vol. 117, No. 3 (2015-01)
`
`
`10. Gu L., Zemp A., Abhari R.S., “Numerical study of the heat transfer effect on a centrifugal
`compressor performance”, Journal of mechanical engineering science, Vol. 229, No. 12
`(2015-08)
`
`
`11. Jafari S., Basol A., Chokani N., Abhari R.S., “A preconditioned multigrid for simulation of
`atmospheric flow and wind turbine wakes”, Computers & Fluids, Vol. 122 (2015-11)
`
`
`12. Kress Ch., Chokani N., Abhari R.S., “Downwind wind turbine yaw stability and performance”,
`Renewable Energy, Vol. 83 (2015-11)
`
`
`13. Kress Ch., Chokani N., Abhari R.S., “Economical and Operational Merits of Offshore Multi-
`Megawatt Downwind Turbines”, EWEA Offshore Conference (2015)
`
`
`14. Lutum E., Cottier F., Crawford M., Laveau B., Abhari R.S., “A computational investigation of
`the effect of surface roughness on heat transfer on the stator endwall of an axial turbine”,
`Journal of Power and Energy | Proceedings of the Institution of Mechanical Engineers, Part
`A, Vol. 229, No. 5 (2015-08)
`
`
`15. Mansour M., Rebholz P., Kalfas A.I., Abhari R.S., “An On - Board Wireless Multi - Sensor
`Measurement System for Rotating Turbomachinery Application”, International Gas Turbine
`Congress, IGTC 2015 (2015-11)
`
`
`
`page 6/24
`
`GE-1004.006
`
`

`
`
`16. Rollinger B., Gambino N., Hudgins D., Sanders A., Brandstätter M., Abhari R.S., Abreau F.,
`“LPP Light Source for Actinic HVM Inspection Applications”, Extreme ultraviolet (EUV)
`lithography VI, Vol. 9422 (2015-02)
`
`
`17. Singh A., Eser P., Chokani N., Abhari R.S., “High Resolution Modelling of the Impacts of
`Exogenous Factors on Power Systems”, Energies | Open Access Energy Research,
`Engineering and Policy Journal, Vol. 8, No. 12 (2015-12)
`
`
`18. Singh A., Eser P., Chokani N., Abhari R.S., “Improved modelling of demand and generation
`in high resolution simulations of interconnected power systems”, 12th International
`Conference on the European Energy Market (EEM) 2015 (2015-05)
`
`
`19. Singh A., Willi D., Chokani N., Abhari R.S., “Increasing On-Shore Wind Generated Electricity
`in Germany's Transmission Grid”, Journal of Engineering for Gas Turbines and Power, Vol.
`137, No. 2 (2015-02)
`
`
`20. Subramanian, B., Chokani, N., Abhari, R.S., “Experimental analysis of wakes in a utility scale
`wind farm”, Journal of Wind Engineering and Industrial Aerodynamics, Vol. 138 (2015-03)
`
`
`21. Subramanian, B., Chokani, N., Abhari, R.S., “Drone-Based Experimental Investigation of
`Three-Dimensional Flow Structure of a Multi-Megawatt Wind Turbine in Complex Terrain”,
`Journal of Solar Energy Engineering, Vol. 137, No. 5 (2015-10)
`
`
`22. Vogel K., Abhari R.S., Zemp A., “Experimental and Numerical Investigation of the Unsteady
`Flow Field in a Vaned Diffuser of a High-Speed Centrifugal Compressor”, Journal of
`Turbomachinery, Vol. 137, No. 7 (2015-07)
`
`
`
`2014
`23. Basol A., Raheem A., Abhari R.S., Huber M. , “Full-Annular Numerical Investigation of the
`Rim Seal Cavity Flows Using GPU’S”, ASME Turbo Expo 2014, GT2014-26755
`
`24. Chokani N., Subramanian B., Abhari R.S., “Instrumented Drone Measurements of 3D Flow
`Structure of Multi-MW Wind Turbines” , European Wind Energy Conference EWEA 2014
`
`25. Gambino N., Brandstätter M., Rollinger B., Abhari R.S., ‘Temporal and Spatial Dynamic of a
`Laser Produced Plasma Through a Multiple Langmuir Probe Detector’, 2014 SPIE Advanced
`Lithography Conference, Paper 9048-89
`
`26. Giovannini A., Abhari R.S., ‘Three-Dimensional Plasma Shape Effects on the EUV Emission
`Distribution in Laser Droplet Interactions’, 2014 SPIE Advanced Lithography Conference,
`Paper 9048-48
`
`27. Giovannini A., Abhari R.S., ‘Three-Dimensional Plasma Shape Effects on the EUV Emission
`Distribution in Laser Droplet Interactions’, Applied Physics Letters 104, 194104 (2014)
`
`28. Jafari S., Chokani N., Abhari R. S., ‘Estimation of Array Loss in Onshore and Offshore Wind
`Farms Using RANS’, European Wind Energy Conference EWEA 2014
`
`29. Jafari S., Chokani N., Abhari R.S., ‘Simulation of Wake Interactions in Wind Farms Using an
`Immersed Wind Turbine Model’, Journal of Turbomachinery, Vol 136, issue 6, pages
`061018-1 to 061018-7
`
`
`
`
`page 7/24
`
`GE-1004.007
`
`

`
`30. Laveau B., Abhari R.S., Crawford M., Lutum E., ‘High Resolution Heat Transfer
`Measurements on the Stator Endwall of an Axial Turbine’, ASME Turbo Expo 2014, GT2014-
`26105
`
`31. Mansour M., Schmid T., Chokani N., Abhari R. S., ‘Power Curve Assessment of a 2MW Wind
`Turbine Located in Complex Terrain’, European Wind Energy Conference EWEA 2014
`
`32. Regina K., Basol A., Jenny Ph., Kalfas A.I., Abhari R.S., ‘Hot Streak Shaping and Migration
`in an Axial Turbine’, Journal of Gas Turbine, Propulsion and Power Systems (JGPP), Vol 5,
`Issue 1, pages 30-36
`
`33. Regina K., Kalfas A., Abhari R.S., Lohaus A., Voelker S., auf dem Kampe T., ‘Aerodynamic
`Robustness of End Wall Contouring Against Rim Seal Purge Flow’, ASME Turbo Expo 2014,
`GT2014-26007
`
`34. Regina K., Kalfas A.I., Abhari R.S., ‘Experimental Investigation of Purge Flow Effects on a
`High Pressure Turbine Stage’, ASME Journal of Turbomachinery
`
`35. Rollinger B., Gambino N., Giovannini A.Z., Bozinova L., Alickaj F., Hertig K., Abhari R.S.,’
`Clean and Stable LPP Light Source for HVM Inspection Application’, 2014 SPIE Advanced
`Lithography Conference, SPIE 9048-91
`
`36. Singh A., Willi D., Chokani N., Abhari R.S., ‘Effect of Increased Wind Generation on
`Germany’s Transmission Grid’, ASME Turbo Expo 2014, GT2014-26093
`
`37. Singh A., Willi D., Chokani N., Abhari R.S., ‘Optimal Power Flow Analysis of Switzerland’s
`Transmission System for Long-Term Capacity Planning’,
`Renewable & Sustainable Energy Reviews, Vo. 34, pp. 596-607
`
`38. Tsalicoglou C., Jafari S., Chokani N., Abhari R.S., ‘RANS Computations of MEXICO Rotor in
`Uniform and Yawed Inflow’, Journal of Engineering for Gas Turbines and Power, Vol. 136,
`issue, 1, pp 011202-1 to 011202-8
`
`39. Vogel K., Zemp A., Abhari R.S., ‘Experimental and Numerical Investigation of the Unsteady
`Flow Field in the Vaned Diffuser of a High-Speed Centrifugal Compressor’, ASME Turbo
`Expo 2014, GT2014-25862
`
`40. Zehndehbad M., Chokani N., Abhari R. S., ‘Large Area Measurements of Wind Speed Using
`a Mobile-Based LIDAR’, European Wind Energy Conference EWEA 2014
`
`41. Zendehbad M., Chokani N., Abhari R.S., ‘Experimental Study of Aero-mechanical Damping
`on Full-Scale Wind Turbines’, ASME Turbo Expo 2014, GT2014-25436
`
`
`2013
`42. Basol A., Abhari R.S., “Performance Improvements of Centrifugal Compressors Through
`Shroud Cavity Leakage Management”, ASME Turbo Expo 2013, GT2013-95809
`
`43. Barber S., Chokani N., Abhari R.S., “Effect of Wake Flow Nonuniformity on Wind Turbine
`Performance and Aerodynamics,” 2013, Journal of Turbomachinery, Vol. 135, No. 1, 011012
`
`
`
`
`page 8/24
`
`GE-1004.008
`
`

`
`44. Giovannini, A., Abhari, R.S., ‘Three-dimensional extreme ultraviolet emission from a droplet-
`based laser-produced plasma’, J. of Applied Physics, Vol. 114, pages 033303-1 to 033303-8
`
`45. Jafari S., Chokani N., Abhari R. S., “Wind Farm in Complex Terrain: Numerical Simulation of
`Wind and Wake for Optimized Micrositing,” 2013, European Wind Energy Conference EWEA
`2013.
`
`46. Jafari S., Chokani N., Abhari R.S., „Simulation of Wake Interactions in Wind Farms Using an
`Immersed Wind Turbine Model“, 2013, ASME Turbo Expo 2013, GT2013-96035
`
`47. Jenny, P., Abhari R.S., Rose M.G., Gier J., Engel K., Brettschneider, M., ‘Unsteady Rotor
`Hub Passage Vortex Behavior in the Presence of Purge Flow in an Axial Low Pressure
`Turbine’, ASME J. of Turbomachinery, Vol 135, Issue 6, 061017-1 to 061017-8
`
`48. Laveau B., Abhari R.S., Crawford M., Lutum E., ‘High Resolution Heat Transfer
`Measurement on Flat and Contoured Endwalls in a Linear Cascade’, ASME J. of
`Turbomachinery, Vol 135, issue 4, pages 041020-1 to 041020-9
`
`49. Mansour M., Atalayer C., Chokani N., Abhari R.S., „Time-Resolved Near-Wake
`Measurements of a 2MW Wind Turbine“, 2013, ASME Turbo Expo 2013, GT2013-95742
`
`50. Regina K., Kalfas A.I., Abhari R.S., „Sensitivity of Purge Flow Effects to Different High Work
`Turbine Designs“, 2013, 21st International Association of Airbreathing Engines Conference,
`ISABE 2013-1152
`
`51. Rebholz P., Kalfas A.I., Abhari R.S., „Experimental and Numerical Investigation of the Impact
`of a Tip Shroud Leading and Trailing Edge Platform Cutback on the Efficiency of a State of
`the Art Low Pressure Gas Turbine Stage“, 2013, 21st International Association of
`Airbreathing Engines Conference, ISABE 2013-1159
`
`52. Roald L., Jonkman J., Roberston A., Chokani N., „Effect of Second-Order Hydrodynamics on
`Floating Offshore Wind Turbines“, 2013, 10th Deep Sea Offshore Wind R&D Conference.
`
`53. Rose M.G., Jenny P., Gier J., Abhari, R.S., ‘Experimentally Observed Unsteady Work at Inlet
`to and Exit From an Axial Flow Turbine Rotor’, ASME Journal of Turbomachinery, Vol 135,
`issue 6, pages 061017-1 to 061017-8
`
`54. Singh A, Chokani N., Abhari R.S., „Optimizing Synergy of Utility-Scale Wind and Pumped
`Hydro Storage“, 2013, ASME Turbo Expo 2013, GT2013-94552
`
`55. Singh A., Giannoulakis S., Chokani N., Abhari R.S., “Large-Area Identification of Wind Farms
`and Optimization of Turbine Layout,” 2013, European Wind Energy Conference EWEA 2013.
`
`56. Tsalicoglou C., Jafari S., Chokani N., Abhari R.S., „RANS Computations of Wind Turbine
`Near-Wake Aerodynamics in Uniform and Yawed Inflow“, 2013, ASME Turbo Expo 2013,
`GT2013-96034
`
`57. Zemp A., Abhari R.S., “Vaned Diffuser Induced Impeller Blade Vibrations in a High-Speed
`Centrifugal Compressor,” 2013, Journal of Turbomachinery, Vol. 135, No. 1, 021015.
`
`
`
`
`
`page 9/24
`
`GE-1004.009
`
`

`
`2012
`58. Abhari R.S., Rollinger B., Giovannini, A., Morris, O., Henderson, I., Ellwi, S. S., “Laser-
`Produced Plasma Light Source for Extreme-Ultraviolet Lithography Applications,” 2012,
`Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 11, No. 2, 021114.
`
`59. Barmpalias K.G., Chokani N., Kalfas A.I., Abhari R.S., “Data Adaptive Spectral Analysis of
`Unsteady Leakage Flow in an Axial Turbine,” 2012, International Journal of Rotating
`Machinery, vol. 2012, 121695.
`
`60. Barmpalias K.G., Kalfas A.I., Abhari R.S., Shibukawa N., Sasaki T., “Design Considerations
`for Axial Steam Turbine Rotor Inlet Cavity Volume and Length Scale,” 2012, Journal of
`Turbomachinery, Vol. 134, No. 5, 051031.
`
`61. Barmpalias K.G., Kalfas A.I., Abhari R.S., Shibukawa N., Sasaki T., “The Impact of Rotor
`Inlet Cavity Volume and Length Scale on Efficiency,” 2012, ASME Turbo Expo 2012,
`GT2012-68076.
`
`62. Basol A., Regina K., Kalfas A.I., Abhari R.S., “Integrated Combustor Turbine Design for
`Improved Aerothermal Performance: Effect of Dilution Air Control,” 2012, Journal of
`Engineering for Gas Turbines and Power, Vol. 134, No. 9, 091501.
`
`63. Jafari S., Sommer T., Chokani N., Abhari R.S., “Wind Resource Assessment Using a
`Mesoscale Model: The Effect of Horizontal Resolution,” 2012, ASME Turbo Expo 2012,
`GT2012-69712.
`
`64. Jafari S., Chokani N., Abhari R.S., “An Immersed Boundary Method for Efficient Simulation of
`Wind Flow over Complex Terrain,” 2012, Journal of Solar Energy Engineering, Vol. 134, No.
`1, 011006.
`
`65. Jenny P., Lenherr C., Abhari R.S., Kalfas A.I., “Effect of Hot Streak Migration on Unsteady
`Blade Row Interaction in an Axial Turbine,” 2012, Journal of Turbomachinery, Vol. 134, No.
`9, 051020.
`
`66. Jenny P., Abhari R.S., Rose M.G., Gier,J., Engel K. Brettschneider, M., “Unsteady Rotor Hub
`Passage Vortex Behavior in the Presence of Purge Flow in an Axial Low Pressure Turbine,”
`2012, ASME Turbo Expo 2012, GT2012-69256.
`
`67. Jenny P., Abhari R.S., Rose M.G., Brettschneider, M., Gier,J., “A Low Pressure Turbine With
`Profiled Endwalls and Purge Flow Operating With a Pressure Side Bubble,” 2012, Journal of
`Turbomachinery, Vol. 134, No. 6, 061038.
`
`68. Kocer G., Chokani N., Abhari R.S., “Detailed Measurements in the Wake of a 2MW Wind
`Turbine,” 2012 Proc. EWEA 2012.
`
`69. Kocer G., Chokani N., Abhari R.S., “Wake Structure of a 2MW Wind Turbine Measured
`Using an Instrumented UAV,” 2012, AIAA Paper 2012- 0231, 50th AIAA Aerospace Sciences
`Meeting.
`
`70. Kochman, E., Singh, A., Chokani N., Abhari R.S., “Large-Area Assessment of Performance
`Risk,” 2012 Proc. EWEA 2012.
`
`
`
`
`page 10/24
`
`GE-1004.010
`
`

`
`71. Kress C., Barber S., Chokani N., Abhari R.S., “A New Kinematic Model for Improved
`Modeling of Wakes,” 2012, German Wind Energy Conference DEWEK, Bremen, Germany.
`
`72. Laveau B., Abhari R.S., Crawford M., Lutum E., “High Resolution Heat Transfer
`Measurement on Flat and Contoured Endwall in a Linear Cascade,” 2012, ASME Turbo
`Expo 2012, GT2012-69737.
`
`73. Mansour M., Chokani N., Kalfas A.I., Abhari R.S., “Impact of Time-Resolved Entropy
`Measurement on a One-and-One-Half-Stage Axial Turbine Performance,” 2012, Journal of
`Turbomachinery, Vol. 134, No. 2, 021008.
`
`74. Morris, O., Gambino, N., Giovannini, A., Henderson, I., Abhari R.S., “Extreme Ultraviolet and
`Out-of-Band Radiation Emission from a Tin Droplet based LPP Source
`2012, Proc. SPIE Vol. 8322, Paper 8322-17.
`
`75. Rollinger, B, Mansour, M., Abhari, R. S., “High Temperature Fast Response Pressure Probe
`for Use in Liquid Metal Droplet Dispensers,” 2012, Review of Scientific Instruments, Vol.
`83, 065002.
`
`76. Rollinger B., Giovannini, A., Abhari R.S., “Tin Droplets for EUV Sources,” 2012, Proc. SPIE
`Vol. 8322, Paper 8322-98.
`
`77. Rose M.G., Jenny P., Gier J., Abhari, R.S., “Experimentally Observed Unsteady Work at
`Inlet to and Exit from an Axial Flow Turbine Rotor,” 2012, ASME Turbo Expo 2012, GT2012-
`69207.
`
`78. Regina K., Kalfas A.I., Abhari R.S., “Experimental Investigation of Purge Flow Effects on a
`High Pressure Turbine Stage,” 2012, ASME Turbo Expo 2012, GT2012-69466.
`
`79. Singh A, Chokani N., Abhari R.S., “Large-Area Assessment of Transmission Capacity for
`Wind Power Dispatch,” 2012, German Wind Energy Conference DEWEK, Bremen,
`Germany.
`
`80. Subramanian B., Chokani N., Abhari R.S., “Full-Scale HAWT: Structure of Near-Wake
`Turbulence Measured with an Instrumented UAV,” 2012, EUROMECH Colloquium 528,
`Oldenburg, Germany.
`
`81. Subramanian B., Chokani N., Abhari R.S., “Full-Scale HAWT: Near-Wake Turbulence
`Structure Measured with an Instrumented UAV,” 2012, Proc. EWEA 2012.
`
`82. Tsalicoglou C., Barber S., Chokani N., Abhari R.S., “Effect of Flow Inclination on Wind
`Turbine Performance,” 2012, ASME Turbo Expo 2012, GT2012-68473.
`
`83. Tsalicoglou C., Barber S., Chokani N., Abhari R.S., “Effect of Flow Inclination on Wind
`Turbine Performance,” 2012, Journal of Engineering for Gas Turbines and Power, Vol. 134,
`No. 12, 122601.
`
`84. Zemp A., Abhari R.S., “Vaned Diffuser Induced Impeller Blade Vibrations in a High-Speed
`Centrifugal Compressor,” 2012, ASME Turbo Expo 2012, GT2012-69400.
`
`
`
`
`
`page 11/24
`
`GE-1004.011
`
`

`
`2011
`85. Aga V., Abhari R.S., “Influence of Flow Structure on Compound Angled Film Cooling
`Effectiveness and Heat Transfer,” 2011, Journal of Turbomachinery, Vol. 131, No. 3, 031029.
`
`86. Basol, A.M. Jenny P., Ibrahim M., Kalfas A.I., Abhari R.S., “Hot Streak Migration in a Turbine
`Stage: Integrated Design to Improve Aero-Thermal Performance,” 2011, Journal of
`Engineering for Gas Turbines and Power, Vol. 133, 019011.
`
`87. Basol A., Regina K., Kalfas A.I., Abhari R.S., “Integrated Combustor – Turbine Design for
`Improved Aerothermal Performance: Effect of Dilution Air Control,” 2011, ASME Turbo Expo
`11, GT2011-46354.
`
`88. Barber S., Chokani N., Abhari R.S., “Assessment of Wind Turbine Performance in Alpine
`Environments,” 2011, Wind Engineering, Vol. 35, pp. 313-328.
`
`89. Barber S., Chokani N., Abhari R.S., “Effect of Wake Flow Non-Uniformity on Wind Turbine
`Performance and Aerodynamics,” GT2011-46230, 2011, Proc. ASME Turbo Expo 2011.
`
`90. Barber S., Wang Y., Jafari S., Chokani N., Abhari R.S., “The Impact of Ice Formation on
`Wind Turbine Performance and Aerodynamics,” 2011, Journal of Solar Energy Engineering,
`Vol. 133, No. 1, 011007.
`
`91. Barber S., Chokani N., Abhari R.S., “Wind Turbine Performance and Aerodynamics in Wakes
`within Wind Farms,” 2011, Proc. EWEA 2011.
`
`92. Barmpalias K.G., Kalfas A.I., Abhari R.S., Hirano T., Shibukawa N., Sasaki T., “Design
`considerations for axial steam turbine rotor inlet cavity volume and length,” scale GT2011-
`45127, 2011, Proc. ASME Turbo Expo 2011.
`
`93. Barmpalias K.G., Kalfas A.I., Abhari R.S., Shibukawa N., “Impact Of Rotor Inlet Cavity
`Geometry On Shrouded Turbine Efficiency,” 2011, European Turbomachinery Conference
`ETC 11 Istanbul, Turkey.
`
`94. Barmpalias K.G., Kalfas A.I., Abhari R.S., Hirano T., Shibukawa N., Sasaki T., “Controlling
`Mixing at the Interaction Zone Through Systematic Variation of the Inlet Rotor Cavity Volume
`and Length Scale,” GTC2011-0002, 2011, International Gas Turbine Congress Osaka, 10th
`Congress in Japan, IGTC '11 Osaka.
`
`95. Barmpalias K.G., Kalfas A.I., Abhari R.S., Shibukawa N., Sasaki T., “Integrated Design of
`Rotor Leading Edge and Cavity Flows in an Axial Shrouded Turbine,” 2011, International
`Society For Airbreathing Engines, ISABE 2011, 20th ISABE Conference.
`
`96. Jafari S., Chokani N., Abhari R.S., “An Immersed Boundary Method for Efficient Simulation of
`Wind Flow over Complex Terrain,” 2011, Proc. EWEA 2011.
`
`97. Jafari S., Chokani N., Abhari R.S., “Terrain Effects On Wind Flow: Simulations With An
`Immersed Boundary Method,” 2011, GT2011-46240, ASME Turbo Expo, Vancouver,
`Canada.
`
`
`
`
`page 12/24
`
`GE-1004.012
`
`

`
`98. Jenny, P., Abhari, R. S., Rose, M. G., Brettschneider, M. and Gier, J., “A Low Pressure
`Turbine with Profiled End Walls and Purge Flow Operating with a Pressure Side Bubble,”
`ASME Turbo Expo, Vancouver, 2011, GT2011-46309.
`
`99. Jenny, P., Abhari, R.S., Rose, M.G., Brettschneider, M., Gier, J., Engel, K., “Low-Pressure
`Turbine End Wall Design Optimisation and Experimental Verification in the Presence of
`Purge Flow,” 2011, 20th International Symposium on Air-Breathing Engines, Gothenburg,
`Sweden, ISABE Paper Presentation.
`
`100. Kocer G., Mansour M., Chokani N., Abhari R.S., Müller M., “Full-Scale Wind Turbine Near-
`Wake Measurements Using an Instrumented Uninhabited Aerial Vehicle,” 2011, Journal of
`Solar Energy Engineering, Vol. 133, No. 4, 041011.
`
`101. Kocer G., Mansour M., Chokani N., Abhari R.S., Müller M., “Full-Scale Wind Turbine Wake
`Measurements Using an Instrumented UAV,” 2011, Proc. EWEA 2011.
`
`102. Kochman, E., Jafari S., Chokani N., Abhari R.S., “Impact of Shear, Swirl and Yaw on Wind
`Turbine Performance,” 2011, Proc. EWEA 2011.
`
`103. Lenherr C., Kalfas A.I., Abhari R.S., “High Temperature Fast Response Aerodynamic Probe,”
`2011, Journal of Engineering for Gas Turbines and Power, Vol. 133, No. 1, 011603.
`
`104. Giovannini A.Z., Morris O., Henderson I., Abhari R.S., Ellwi S., “EUV Brightness, Stability
`and Contamination Measurements at the Intermediate Focus Module,” 2011, Proc. SPIE Vol.
`7969, Paper 7969-105.
`
`105. Mansour M., Chokani N., Kalfas A.I., Abhari R.S., “Impact of Time-Resolved Entropy
`Measurement on a One-and-One-Half-Stage Axial Turbine Performance,” 2011, Journal of
`Turbomachinery, Vol. 133, 022104.
`
`106. Mansour M., Kocer G., Lenherr C., Chokani N., Abhari R.S., “Seven-Sensor Fast-Response
`Probe for Full-Scale Wind Turbine Flowfield Measurements,” 2011, Journal of Engineering
`for Gas Turbines and Power, Vol. 133, 017102.
`
`107. Mischo B., Burdet A., Abhari R.S., “Influence of Stator-Rotor Interaction on the Aerothermal
`Performance of Recess Blade Tips,” 2011 Journal of Turbomachinery, Vol. 133, No. 1,
`011023.
`
`108. Morris O., Abhari R.S., “High Brightness EUV Source for EUVL Applications,” 2011, 2011
`International Workshop on EUV and Soft X-Ray Sources.
`
`109. Schuepbach P., Abhari R., Rose M., Gier J., “Influence of Rim Seal Purge Flow on the
`Performance of an Endwall-Profiled Axial Turbine,” 2011 Journal of Turbomachinery, Vol.
`133, No. 2, 021011.
`
`110. Regina K., Basol A., Jenny P., Kalfas A., Abhari R.S., “Hot Streak Shaping and Migration in
`an Axial Turbine, IGTC2011-ABS-0020,” 2011, International Gas Turbine Congress Osaka,
`10th Congress in Japan, IGTC '11 Osaka.
`
`
`
`
`page 13/24
`
`GE-1004.013
`
`

`
`111. Rollinger B., Morris O., Abhari R.S., “Stable Tin Droplets for LPP EUV Sources,” 2011, Proc.
`SPIE Vol. 7969, Paper 7969-104.
`
`112. Zemp A., Abhari R.S., “Experimental Investigation of Forced Response Impeller Blade
`Vibration in a Centrifugal Compressor with Variable Inlet Guide Vanes - Part 1: Blade
`Damping,” 2011, Proceedings of ASME Turbo Expo 2011 GT2011, Vancouver, Canada.
`
`113. Zemp A., Abhari R.S., “Experimental Investigation of Forced Response Impeller Blade
`Vibration in a Centrifugal Compressor with Variable Inlet Guide Vanes - Part 2: Forcing
`Function and FSI Computations,” 2011, Proceedings of ASME Turbo Expo 2011 GT2011,
`Vancouver, Canada.
`
`
`2010
`114. Barber S., Wang Y., Jafari S., Chokani N., Abhari R.S., “The Effect of Icing on Wind Turbine
`Performance and Aerodynamics,” 2010 Proc. EWEC 2010.
`
`115. Barmpalias K., Kalfas A.I., Abhari R.S., Hirano T., Shibukawa N., “Effects of Design
`Variations of Rotor Entry Cavity Geometry on Shrouded Steam Turbine Performance,” 2010,
`ASME Turbo Expo 2010, GT2010-22279.
`
`116. Basol, A.M. Jenny P., Ibrahim M., Kalfas A.I.,