3-865-674-11 (1)
`
`GB
`
`ES
`
`SE
`
`PT
`
`FM/MW/LW
`Cassette
`Car Stereo
`
`Operating Instructions
`Manual de instrucciones
`Bruksanvisning
`Manual de instruções
`
`For installation and connections, see the supplied installation/connections
`manual.
`
`Para obtener información sobre la instalación y las conexiones, consulte el manual
`de instalación/conexiones suministrado.
`
`Vi hänvisar till det medföljande häftet angående montering/anslutningar.
`
`Para a instalação e as ligações, consulte o manual de instalação/ligações
`fornecido.
`
`XR-C5120R
`XR-C5110R
`XR-C4120
`
` 1999 by Sony Corporation
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0001
`
`ª
`

`

`Welcome !
`Thank you for purchasing this Sony Cassette
`Player. This unit lets you enjoy a variety of
`features as well as a rotary commander
`(supplied for XR-C4120, optional for
`XR-C5120R/C5110R).
`
`In addition to the cassette playback and radio
`operations, you can expand your system by
`connecting an optional CD/MD unit*1.
`
`Table of Contents
`
`This Unit Only
`
`Location of controls ............................................ 3
`
`Getting Started
`Resetting the unit ................................................ 4
`Detaching the front panel .................................. 4
`Setting the clock .................................................. 5
`
`Cassette Player
`Listening to a tape ............................................... 6
`Playing a tape in various modes ....................... 7
`
`Radio
`Memorizing stations automatically
`— Best Tuning Memory (BTM) .................... 7
`Memorizing only the desired stations ............. 8
`Receiving the memorized stations .................... 8
`
`RDS (XR-C5120R/C5110R only)
`Overview of the RDS function .......................... 9
`Displaying the station name .............................. 9
`Retuning the same programme automatically
`— Alternative Frequencies (AF) .................. 9
`Listening to traffic announcements ................. 11
`Presetting the RDS stations with the AF
`and TA data .................................................... 11
`Locating a station by programme type .......... 12
`Setting the clock automatically ....................... 13
`
`When you operate this unit or a connected
`optional CD unit with the CD TEXT function,
`the CD TEXT information will appear in the
`display when you play a CD TEXT disc*2.
`
`*1 You can connect a CD changer, an MD changer,
`a CD player, or an MD player.
`*2 A CD TEXT disc is an audio CD that includes
`information such as the disc name, artist name,
`and track names.
`This information is recorded on the disc.
`
`Other Functions
`Labelling the rotary commander .................... 14
`Using the rotary commander .......................... 14
`Adjusting the sound characteristics ............... 16
`Attenuating the sound ..................................... 16
`Changing the sound and display settings ..... 16
`Boosting the bass sound
`— D-bass ....................................................... 17
`
`With Optional Equipment
`CD/MD Unit
`Playing a CD or MD ......................................... 18
`Playing tracks repeatedly
`— Repeat Play .............................................. 19
`Playing tracks in random order
`— Shuffle Play .............................................. 19
`
`Additional Information
`Precautions ......................................................... 20
`Maintenance ....................................................... 21
`Dismounting the unit ....................................... 21
`Specifications ..................................................... 22
`Troubleshooting guide ..................................... 23
`
`2
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0002
`
`

`

`Location of controls
`
`MODE
`
`SEEK / AMS
`
`SOUND
`
`SOURCE
`
`6
`
`–
`
`PRESET
`DISC
`
`+
`
`DSPL
`
`PTY
`
`AF/TA
`
`D-BASS
`
`OFF 1
`
`2
`
`3
`
`RELEASE
`
`OFF
`
`SHIFT
`
`1
`
`SET UP
`2
`
`PLAY MODE
`3
`
`4
`
`5
`
`6
`
`XR-C5120R/C5110R
`
`Refer to the pages listed for details.
`
`1 SEEK/AMS (seek/Automatic Music
`Sensor/manual search) control
`6, 8, 10, 13, 19
`2 MODE (*)button
`During tape playback:
`Playback direction change 6
`During radio reception:
`BAND select 7, 8
`During CD or MD playback:
`CD/MD unit select 18
`3 SOURCE (TAPE/TUNER/CD/MD) button
`6, 7, 8, 11, 18
`4 Dial (volume/bass/treble/left-right/rear-
`front control) 5, 16
`5 SOUND button 16
`6 Display window
`7 DSPL (display mode change) button
`6, 8, 9, 18
`8 6 (eject) button 6
`9 PTY button (XR-C5120R/C5110R only)
`RDS Programme 13
`
`!… PRESET/DISC button
`During radio reception:
`Preset stations select 8
`During CD/MD playback:
`Disc change 19
`!` AF/TA button (XR-C5120R/C5110R only)
`9, 10, 11, 12
`!“ RELEASE (front panel release) button
`4, 21
`!£ Reset button (located on the front side
`of the unit behind the front panel) 4
`!¢ OFF button 4, 6
`!¥
`SHIFT button
`PLAY MODE 7, 8, 10, 12, 19
`SET UP 5, 13, 16, 18
`!⁄ POWER SELECT switch
`(located on the bottom of the unit)
`See “POWER SELECT switch” in the
`Installation/Connections manual.
`!ƒ Number buttons 8, 10, 12
`!¥ D-BASS control 17
`
`3
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0003
`
`

`

`Getting Started
`
`Attaching the front panel
`Attach part a of the front panel to part b of
`the unit as illustrated and push the left side
`into position until it clicks.
`
`a
`
`b
`
`Notes
`• Be sure not to attach the front panel upside
`down.
`• Do not press the front panel too hard against the
`unit when attaching it.
`• Do not press too hard or put excessive pressure
`on the display window of the front panel.
`• Do not expose the front panel to direct sunlight
`or heat sources such as hot air ducts, and do not
`leave it in a humid place. Never leave it on the
`dashboard of a car parked in direct sunlight or
`where there may be a considerable rise in
`temperature.
`
`Caution alarm
`If you turn the ignition key switch to the OFF
`position without removing the front panel, the
`caution alarm will beep for a few seconds
`(only when the POWER SELECT switch on the
`bottom of the unit is set to the A position).
`If you connect an optional power amplifier and
`do not use the built-in amplifier, the beep
`sound will be deactivated.
`
`Resetting the unit
`Before operating the unit for the first time or
`after replacing the car battery, you must reset
`the unit.
`Remove the front panel and press the reset
`button with a pointed object, such as a
`ballpoint pen.
`
`Reset button
`
`Note
`Pressing the reset button will erase the clock
`setting and some memorized functions.
`
`Detaching the front panel
`You can detach the front panel of this unit to
`protect the unit from being stolen.
`
`1 Press (OFF).
`
`2 Press (RELEASE), then slide the front
`panel a little to the left, and pull it off
`towards you.
`
`(OFF)
`
`(RELEASE)
`
`Notes
`• Be sure not to drop the panel when detaching it
`from the unit.
`• If you detach the panel while the unit is still
`turned on, the power will turn off automatically
`to prevent the speakers from being damaged.
`• When carrying the front panel with you, use the
`supplied front panel case.
`
`4
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0004
`
`

`

`2 Press (SHIFT).
`
`The clock starts.
`3 Press (SHIFT).
`After the clock setting is complete, the
`display returns to normal playback mode.
`
`Note
`If the POWER SELECT switch on the bottom of the
`unit is set to the B position, turn the power on
`first, then set the clock.
`
`Setting the clock
`The clock uses a 24-hour digital indication.
`
`Example: To set the clock to 10:08
`1 Press (SHIFT), then press (2) (SET UP)
`repeatedly until “CLOCK” appears.
`
`1 Press (4) (n).
`
`The hour indication flashes.
`
`2 Set the hour.
`
`to go backward
`
`to go forward
`
`3 Press (4) (n).
`
`The minute indication flashes.
`
`4 Set the minute.
`
`to go backward
`
`to go forward
`
`5
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0005
`
`

`

`Cassette Player
`
`Listening to a tape
`
`Insert a cassette.
`Playback starts automatically.
`
`If a cassette is already inserted, press
`(SOURCE) repeatedly until “FWD” or “REV”
`appears to start playback.
`
`The side facing up is played.
`
`The side facing down is played.
`
`Tip
`To change the tape‘s playback direction, press
`(MODE) (*).
`
`To
`
`Stop playback
`Eject the cassette
`
`Press
`
`(OFF)
` 6
`
`Fast-winding the tape
`
`During playback, push the SEEK/AMS
`control up or down and hold.
`
`SEEK / AMS
`
`Fast-forward
`
`Rewind
`
`To start playback during fast-forwarding or
`rewinding, press (MODE) (*).
`
`Locating a specific track
`— Automatic Music Sensor (AMS)
`
`During playback, push the SEEK/AMS
`control up or down and release for each
`track you want to skip.
`You can skip up to nine tracks at one time.
`
`SEEK / AMS
`
`To locate
`succeeding tracks
`
`To locate
`preceding tracks
`
`Note
`The AMS function may not work when:
`— the blanks between tracks are shorter than
`four seconds
`— there is noise between tracks
`— there are long sections of low volume or quiet
`sections.
`
`Changing the display item
`Each time you press (DSPL), the item changes
`as follows:
`z Tape playback
`
`z Clock
`
`Frequency* Z
`
`* While either of the following functions are
`activated.
`— ATA function
`— AF/TA function (XR-C5120R/C5110R)
`
`After you select the desired item, the display
`will automatically change to the Motion
`Display mode after a few seconds.
`In the Motion Display mode, all the above
`items are scrolled in the display one by one in
`order.
`
`Tip
`The Motion Display mode can be turned off. (See
`“Changing the sound and display settings” on
`page 16).
`
`6
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0006
`
`

`

`Playing a tape in various
`modes
`You can play the tape in various modes:
`•REP (Repeat Play) repeats the current track.
`•METAL (Metal)* lets you play a metal or
`CrO2 tape.
`•BL SKP (Blank Skip) skips blanks longer than
`eight seconds.
`•ATA (Automatic Tuner Activation) turns on
`the tuner automatically when fast-winding
`the tape.
`1 During playback, press (SHIFT).
`“SHIFT-ON” appears in the display.
`
`2 Press (3) (PLAY MODE) repeatedly until
`the desired play mode appears.
`Each time you press (3) (PLAY MODE),
`the item changes as follows:
`REP n METAL*n BL SKP n ATA
`* XR-C5120R/C4120 only
`
`3 Press (4) (n) to select “ON.”
`
`Play mode starts.
`
`4 Press (SHIFT).
`
`Radio
`
`Memorizing stations
`automatically
`— Best Tuning Memory (BTM)
`
`The unit selects the stations with the strongest
`signals and memorizes them in the order of
`their frequencies. You can store up to 6 stations
`on each band (FM1, FM2, FM3, MW, and LW).
`
`Caution
`When tuning in stations while driving, use
`Best Tuning Memory to prevent accidents.
`
`1 Press (SOURCE) repeatedly to select the
`tuner.
`Each time you press (SOURCE), the source
`changes as follows:
`z TUNER z CD* z MD* z TAPE
`
`* If the corresponding optional equipment is
`not connected, this item will not appear.
`
`2 Press (MODE) repeatedly to select the
`band.
`Each time you press (MODE), the band
`changes as follows:
`z FM1 z FM2 z FM3 z MW z LW
`
`To return to normal playback mode, select
`“OFF” in step 3 above.
`
`3 Press (SHIFT), then press (3) (PLAY
`MODE) repeatedly until “B.T.M” appears.
`
`Note
`If the “SFT” indication appears, press (SHIFT) to
`complete the mode setting.
`
`4 Press (4) (n).
`The unit stores stations in the order of their
`frequencies on the number buttons.
`A beep sounds when the setting is stored.
`
`5 Press (SHIFT).
`
`Notes
`• The unit does not store stations with weak
`signals. If only a few stations can be received,
`some number buttons will retain their former
`setting.
`• When a number is indicated in the display, the
`unit starts storing stations from the one currently
`displayed.
`
`7
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0007
`
`

`

`Memorizing only the
`desired stations
`You can preset up to 18 FM stations (6 each for
`FM1, 2, and 3), up to 6 MW stations, and up to
`6 LW stations in the order of your choice.
`
`1 Press (SOURCE) repeatedly to select the
`tuner.
`
`2 Press (MODE) repeatedly to select the
`band.
`
`3 Push the SEEK/AMS control up or down
`to tune in the station that you want to
`store on the number button.
`
`4 Press and hold the desired number
`button ((1) to (6)) until “MEM” appears.
`The number button indication appears in
`the display.
`
`Note
`If you try to store another station on the same
`number button, the previously stored station will
`be erased.
`
`Receiving the memorized
`stations
`1 Press (SOURCE) repeatedly to select the
`tuner.
`
`2 Press (MODE) repeatedly to select the
`band.
`
`3 Press the number button ((1) to (6)) on
`which the desired station is stored.
`
`Tip
`Press either side of (PRESET/DISC) to receive the
`stations in the order they are stored in the
`memory (Preset Search Function).
`
`If you cannot tune in a preset
`station
`
`Push and release the SEEK/AMS control
`up or down to search for the station
`(automatic tuning).
`Scanning stops when the unit receives a
`station. Push the SEEK/AMS control up or
`down repeatedly until the desired station is
`received.
`
`Note
`If the automatic tuning stops too frequently, press
`(SHIFT), then press (3) (PLAY MODE) repeatedly
`until “LOCAL” (local seek mode) is displayed. Then
`press (4) (n) to select “LOCAL-ON.” Press (SHIFT).
`Only the stations with relatively strong signals will
`be tuned in.
`
`Tip
`If you know the frequency of the station you want
`to listen to, push the SEEK/AMS control up or
`down and hold until the desired frequency
`appears (manual tuning).
`
`If FM stereo reception is poor
`— Monaural Mode
`1 During radio reception, press (SHIFT),
`then press (3) (PLAY MODE) repeatedly
`until “MONO” appears.
`
`2 Press (4) (n) repeatedly until “MONO-
`ON“ appears.
`The sound improves, but becomes
`monaural (“ST” disappears).
`
`3 Press (SHIFT).
`
`To return to normal mode, select “MONO-
`OFF” in step 2 above.
`
`Changing the display item
`Each time you press (DSPL), the item changes
`as follows:
`Frequency (Station Name)* (cid:247) Clock
`
`* When you tune in an FM station that transmits
` RDS data, the station name appears (XR-C5120R/
`C5110R only).
`
`After you select the desired item, the display
`will automatically change to the Motion
`Display mode after a few seconds.
`In the Motion Display mode, all the above
`items are scrolled in the display one by one in
`order.
`
`Tip
`The Motion Display mode can be turned off. (See
`“Changing the sound and display settings” on
`page 16).
`
`8
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0008
`
`

`

`Tip
`The Motion Display mode can be turned off. (See
`“Changing the sound and display settings” on
`page 16).
`
`Note
`“NO NAME” appears if the received station does
`not transmit RDS data.
`
`Retuning the same
`programme automatically
`— Alternative Frequencies (AF)
`
`The Alternative Frequencies (AF) function
`automatically selects and retunes the station
`with the strongest signal in a network. By
`using this function, you can continuously
`listen to the same programme during a long-
`distance drive without having to retune the
`station manually.
`
`Frequencies change automatically.
`
`98.5MHz
`
`96.0MHz
`
`Station
`
`102.5MHz
`1 Select an FM station (page 7).
`
`2 Press (AF/TA) repeatedly until “AF-ON”
`appears.
`The unit starts searching for an alternative
`station with a stronger signal in the same
`network.
`
`Note
`When there is no alternative station in the area
`and you do not need to search for an alternative
`station, turn the AF function off by pressing
`(AF/TA) repeatedly until “AF TA-OFF” appears.
`
`RDS (XR-C5120R/C5110R only)
`
`Overview of the RDS
`function
`Radio Data System (RDS) is a broadcasting
`service that allows FM stations to send
`additional digital information along with the
`regular radio programme signal. Your car
`stereo offers you a variety of services. Here are
`just a few: retuning the same programme
`automatically, listening to traffic
`announcements, and locating a station by
`programme type.
`
`Notes
`• Depending on the country or region, not all of
`the RDS functions are available.
`• RDS may not work properly if the signal strength
`is weak or if the station you are tuned to is not
`transmitting RDS data.
`
`Displaying the station
`name
`The name of the current station lights up in the
`display.
`Select an FM station (page 7).
`When you tune in an FM station that
`transmits RDS data, the station name
`appears in the display.
`
`Note
`The “*” indication means that an RDS station is
`being received.
`
`Changing the display item
`Each time you press (DSPL), the item changes
`as follows:
`Station Name (Frequency) (cid:247) Clock
`
`After you select the desired item, the display
`will automatically change to the Motion
`Display mode after a few seconds.
`In the Motion Display mode, all the above
`items are scrolled in the display one by one in
`order.
`
`9
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0009
`
`

`

`Local link function
`(United Kingdom only)
`The Local Link function lets you select other
`local stations in the area, even if they are not
`stored on your number buttons.
`
`1 Press a number button that has a local
`station stored on it.
`
`2 Within five seconds, press the number
`button of the local station again.
`
`3 Repeat this procedure until the desired
`local station is received.
`
`Changing the display item
`Each time you press (AF/TA), the item changes
`as follows:
` (cid:211) TA-ON (cid:211) AF TA-ON*
`
`AF-ON (cid:210) AF TA-OFF (cid:210)
`* Select this to turn on both the AF and TA
`functions.
`
`Notes
`• When “NO AF” and the station name flash
`alternately, it means that the unit cannot find an
`alternative station in the network.
`• If the station name starts flashing after selecting
`a station with the AF function on, this indicates
`that no alternative frequency is available. Push
`the SEEK/AMS control up or down while the
`station name is flashing (within eight seconds).
`The unit starts searching for another frequency
`with the same PI (Programme Identification) data
`(“PI SEEK” appears and no sound is heard). If the
`unit cannot find another frequency, “NO PI”
`appears, and the unit returns to the previously
`selected frequency.
`
`Listening to a regional programme
`The “REG-ON” (regional on) function lets you
`stay tuned to a regional programme without
`being switched to another regional station.
`(Note that you must turn the AF function on.)
`The unit is factory preset to “REG-ON,” but if
`you want to turn off the function, do the
`following.
`
`1 During radio reception, press (SHIFT),
`then press (3) (PLAY MODE) repeatedly
`until “REG” appears.
`
`2 Press (4) (n) repeatedly until “REG-OFF”
`appears.
`
`3 Press (SHIFT).
`Note that selecting “REG-OFF” might cause
`the unit to switch to another regional
`station within the same network.
`
`To return to regional on, select “REG-ON” in
`step 2 above.
`
`Note
`This function does not work in the United
`Kingdom and in some other areas.
`
`10
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0010
`
`

`

`Listening to traffic
`announcements
`The Traffic Announcement (TA) and Traffic
`Programme (TP) data let you automatically
`tune in an FM station that is broadcasting
`traffic announcements even if you are listening
`to other programme sources.
`
`Press (AF/TA) repeatedly until “TA-ON”
`or “AF TA-ON” appears.
`The unit starts searching for traffic
`information stations. “TP” appears in the
`display when the unit finds a station
`broadcasting traffic announcements.
`When the traffic announcement starts,
`“TA” flashes. The flashing stops when the
`traffic announcement is over.
`
`Tip
`If the traffic announcement starts while you are
`listening to another programme source, the unit
`automatically switches to the announcement and
`goes back to the original source when the
`announcement is over.
`
`Notes
`• “NO TP” flashes for five seconds if the received
`station does not broadcast traffic announcements.
`Then, the unit starts searching for a station that
`broadcasts it.
`• When “EON” appears with “TP” in the display,
`the current station makes use of broadcast traffic
`announcements by other stations in the same
`network.
`
`To cancel the current traffic
`announcement
`
`Press (AF/TA) or (SOURCE).
`To cancel all traffic announcements, turn off
`the function by pressing (AF/TA) until “AF
`TA-OFF” appears.
`
`Presetting the volume of traffic
`announcements
`You can preset the volume level of the traffic
`announcements beforehand so you won’t
`miss the announcement. When a traffic
`announcement starts, the volume will be
`automatically adjusted to the preset level.
`
`1 Select the desired volume level.
`
`2 Press (AF/TA) for two seconds.
`“TA” appears and the setting is stored.
`
`Receiving emergency
`announcements
`If an emergency announcement comes in while
`you are listening to the radio, the programme
`will automatically switch to it. If you are
`listening to a source other than the radio, the
`emergency announcements will be heard if
`you set AF or TA to on. The unit will then
`automatically switch to these announcements
`no matter which source you are listening to at
`the time.
`
`Presetting the RDS
`stations with the AF and
`TA data
`When you preset RDS stations, the unit stores
`each station’s data as well as its frequency, so
`you don’t have to turn on the AF or TA
`function every time you tune in the preset
`station. You can select a different setting (AF,
`TA, or both) for individual preset stations, or
`the same setting for all preset stations.
`
`11
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0011
`
`

`

`Presetting the same setting for all
`preset stations
`1 Select an FM band (page 7).
`
`2 Press (AF/TA) repeatedly to select either
`“AF-ON,” “TA-ON” or “AF TA-ON” (for
`both AF and TA functions).
`Note that selecting “AF TA-OFF” stores not
`only RDS stations, but also non-RDS
`stations.
`
`3 Press (SHIFT), then press (3) (PLAY
`MODE) repeatedly until “B.T.M” appears.
`
`4 Press (4) (n) until “B.T.M” flashes.
`
`5 Press (SHIFT).
`
`Presetting different settings for
`each preset station
`1 Select an FM band, and tune in the
`desired station.
`
`2 Press (AF/TA) repeatedly to select either
`“AF-ON,” “TA-ON” or “AF TA-ON” (for
`both AF and TA functions).
`
`3 Press the desired number button and
`hold until “MEM” appears.
`Repeat from step 1 to preset other stations.
`
`Tip
`If you want to change the preset AF and/or TA
`setting after you tune in the preset station, you
`can do so by turning the AF or TA function on or
`off.
`
`Locating a station by
`programme type
`You can locate the station you want by
`selecting one of the programme types shown
`below.
`
`Programme types
`News
`Current Affairs
`Information
`Sports
`Education
`Drama
`Culture
`Science
`Varied
`Popular Music
`Rock Music
`Easy Listening
`Light Classical
`Classical
`Other Music Type
`Weather
`Finance
`Children’s Programmes
`Social Affairs
`Religion
`Phone In
`Travel
`Leisure
`Jazz Music
`Country Music
`National Music
`Oldies Music
`Folk Music
`Documentary
`Not specified
`
`Display
`NEWS
`AFFAIRS
`INFO
`SPORT
`EDUCATE
`DRAMA
`CULTURE
`SCIENCE
`VARIED
`POP M
`ROCK M
`EASY M
`LIGHT M
`CLASSICS
`OTHER M
`WEATHER
`FINANCE
`CHILDREN
`SOCIAL A
`RELIGION
`PHONE IN
`TRAVEL
`LEISURE
`JAZZ
`COUNTRY
`NATION M
`OLDIES
`FOLK M
`DOCUMENT
`NONE
`
`Note
`You cannot use this function in some countries
`where no PTY (Programme Type selection) data is
`available.
`
`12
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0012
`
`

`

`1 Press (PTY) during FM reception until
`“PTY” appears.
`
`The current programme type name appears
`if the station is transmitting the PTY data.
`“- - - - -” appears if the received station is
`not an RDS station, or if the RDS data has
`not been received.
`
`2 Press (PTY) repeatedly until the desired
`programme type appears.
`The programme types appear in the order
`shown in the above table. Note that you
`cannot select “NONE” (Not specified) for
`searching.
`
`Setting the clock
`automatically
`The CT (Clock Time) data from the RDS
`transmission sets the clock automatically.
`
`1 During radio reception, press (SHIFT),
`then press (2) (SET UP) repeatedly until
`“CT” appears.
`
`2 Press (4) (n) repeatedly until “CT-ON”
`appears.
`The clock is set.
`
`3 Push the SEEK/AMS control up or down.
`The unit starts searching for a station
`broadcasting the selected programme type.
`When the unit finds the programme, the
`programme type appears again for five
`seconds.
`“NO” and the programme type appear
`alternately for five seconds if the unit
`cannot find the programme type. It then
`returns to the previously selected station.
`
`3 Press (SHIFT) to return to the normal
`display.
`
`To cancel the CT function
`
`Select “CT-OFF” in step 2 above.
`
`Notes
`• The CT function may not work even though an
`RDS station is being received.
`• There might be a difference between the time
`set by the CT function and the actual time.
`
`13
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0013
`
`

`

`Other Functions
`
`You can also control the optional CD or MD
`units with the rotary commander*.
`
`* Supplied for XR-C4120, optional for XR-C5120R/
`C5110R
`
`Labelling the rotary
`commander
`Depending on how you mount the rotary
`commander, attach the appropriate label as
`shown in the illustration below.
`
`SOUND
`MODE
`DSPL
`
`DSPL
`MODE
`SOUND
`
`Using the rotary
`commander
`The rotary commander works by pressing
`buttons and/or rotating controls.
`
`By pressing buttons
`(the SOURCE and MODE buttons)
`
`(SOURCE)
`
`(MODE)
`
`Each time you press (SOURCE), the
`source changes as follows:
`TUNER n CD* n MD* n TAPE
`
`Pressing (MODE) changes the operation
`in the following ways;
`• Tape :
`playback direction
`FM1 n FM2 n FM3 n MW
`• Tuner :
`n LW
`• CD unit* : CD1 n CD2 n …
`• MD unit* : MD1 n MD2 n …
`
`* If the corresponding optional equipment is
`not connected, the item will not appear.
`
`Tip
`When the POWER SELECT switch is set to position
`B, you can turn on this unit by pressing (SOURCE)
`on the rotary commander.
`
`14
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0014
`
`

`

`By rotating the control
`(the SEEK/AMS control)
`
`Press (SOUND) to
`adjust the volume
`and sound menu.
`
`Press (DSPL) to change
`the displayed items.
`
`Changing the operative direction
`The operative direction of controls is factory-
`set as shown below.
`To increase
`
`To decrease
`
`If you need to mount the rotary commander on
`the right hand side of the steering column, you
`can reverse the operative direction.
`
`GB
`
`Rotate the control and release it to:
`•Locate the beginnings of tracks on the
`tape. Rotate and hold the control, and
`release it to fast-wind the tape. To start
`playback while fast-winding the tape,
`press (MODE).
`•Locate a specific track on a disc. Rotate
`and hold the control until you locate the
`specific point in a track, then release it to
`start playback.
`•Tune in stations automatically. Rotate and
`hold the control to find a specific station.
`
`By pushing in and rotating the
`control (the PRESET/DISC control)
`
`Push in and rotate the control to:
`•Receive the stations memorized on the
`number buttons.
`•Change the disc.
`
`Press (SOUND) for two seconds while
`pushing the VOL control.
`
`Tip
`You can also change the operative direction of
`these controls with the unit (see “Changing the
`sound and display settings” on page 16).
`
`Press (ATT) to
`attenuate the
`sound.
`
`OFF
`
`Press (OFF) to turn
`off the unit.
`
`Other operations
`
`Rotate the VOL control to
`adjust the volume.
`
`15
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0015
`
`

`

`Adjusting the sound
`characteristics
`You can adjust the bass, treble, balance, and
`fader.
`You can store the bass and treble levels
`independently for each source.
`
`1 Select the item you want to adjust by
`pressing (SOUND) repeatedly.
`VOL (volume) n BAS (bass) n
`TRE (treble) n BAL (left-right) n
`FAD (front-rear)
`
`2 Adjust the selected item by rotating the
`dial.
`Adjust within three seconds after selecting
`the item. (After three seconds, the dial
`function reverts to volume control.)
`
`Changing the sound and
`display settings
`The following items can be set:
`•CLOCK (page 5).
`•CT (Clock Time)*1 (page 13).
`•AMBER/GREEN – to change the
`illumination colour to amber or green.
`•BEEP – to turn the beep sound on or off.
`•RM (Rotary Commander) – to change the
`operative direction of the rotary
`commander*2.
`— Select “NORM” to use the rotary
`commander as the factory-set position.
`— Select “REV” when you mount the rotary
`commander on the right side of the
`steering column.
`•M.DSPL (Motion Display) – to turn the
`motion display on or off.
`•A.SCRL (Auto Scroll)*3 (page 18).
`
`1 Press (SHIFT).
`
`Attenuating the sound
`
`2 Press (2) (SET UP) repeatedly until the
`desired item appears.
`
`Press (ATT) on the rotary commander*.
`“ATT-ON” flashes momentarily.
`
`* Supplied for XR-C4120, optional for
`XR-C5120R/C5110R
`
`To restore the previous volume level, press
`(ATT) again.
`
`Tip
`The unit decreases the volume automatically when
`a telephone call comes in (Telephone ATT
`function) (XR-C5120R/C4120 only).
`
`Each time you press (2) (SET UP), the item
`changes as follows:
`CLOCK n CT*1 n AMBER/GREEN n BEEP n
`RM n M.DSPL n A.SCRL*3
`
`*1 XR-C5120R/C5110R only
`*2 Supplied for XR-C4120, optional for XR-
`C5120R/C5110R
`*3 When no CD or MD is playing, this item will
`not appear.
`
`16
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0016
`
`

`

`Boosting the bass sound
`— D-bass
`
`You can enjoy a clear and powerful bass
`sound. The D-bass function boosts the low
`frequency signal with a sharper curve than
`conventional bass boost.
`You can hear the bass line more clearly even
`while the vocal volume remains the same. You
`can emphasize and adjust the bass sound
`easily with the D-BASS control.
`
`D-BASS 3
`
`D-BASS 2
`
`D-BASS 1
`
`Level
`
`0dB
`
`Frequency (Hz)
`
`Adjusting the bass curve
`Turn the D-BASS control to adjust the
`bass level (1, 2, or 3).
`“D-BASS” appears in the display.
`
`GB
`
`To cancel, turn the control to OFF.
`
`Note
`If the bass sound becomes distorted, adjust the
`D-BASS control or volume.
`
`3 Press (4) (n) to select the desired
`setting (Example: ON or OFF).
`
`4 Press (SHIFT).
`After the mode setting is complete, the
`display returns to normal playback mode.
`
`Note
`If the “SFT” indication appears, press
`complete the mode setting.
`
`(SHIFT) to
`
`17
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0017
`
`

`

`After you select the desired item, the display
`will automatically change to the Motion
`Display mode after a few seconds.
`In the Motion Display mode, all the above
`items are scrolled in the display one by one in
`order.
`
`Tip
`The Motion Display mode can be turned off. (See
`“Changing the sound and display settings” on
`page 16).
`
`Automatically scrolling a disc name
`— Auto Scroll
`If the disc name, artist name, or track name on
`a CD TEXT disc or MD exceeds 8 characters
`and the Auto Scroll function is on, information
`automatically scrolls across the display as
`follows:
`• The disc name appears when the disc has
`changed (if the disc name is selected).
`• The track name appears when the track has
`changed (if the track name is selected).
`
`If you press (DSPL) to change the display
`item, the disc or track name of the MD or CD
`TEXT disc is scrolled automatically whether
`you set the function on or off.
`
`1 During playback, press (SHIFT).
`
`2 Press (2) (SET UP) repeatedly until
`“A.SCRL” appears.
`
`3 Press (4) (n) to select “A.SCRL-ON.”
`
`4 Press (SHIFT).
`
`To cancel Auto Scroll, select “A.SCRL-OFF” in
`step 3 above.
`
`Note
`For some discs with very many characters, the
`following cases may happen:
`— Some of the characters are not displayed
`— Auto Scroll does not work.
`
`Tip
`To manually scroll the long name of an MD or CD
`TEXT disc after activating the Auto Scroll function,
`press (SHIFT), then (1) ( N) (manual scroll).
`
`With Optional Equipment
`CD/MD Unit
`
`This unit can control a maximum of ten
`external CD/MD units in this configuration:
`CD unit – maximum of five
`MD unit – maximum of five
`Any combination up to ten will work.
`If you connect an optional CD unit with the
`CD TEXT function, the CD TEXT information
`will appear in the display when you play a CD
`TEXT disc.
`
`Playing a CD or MD
`1 Press (SOURCE) repeatedly to select CD
`or MD.
`
`2 Press (MODE) until the desired unit
`appears.
`CD/MD playback starts.
`
`When a CD/MD unit is connected, all the
`tracks play from the beginning.
`
`Changing the display item
`Each time you press (DSPL) during CD, CD
`TEXT, or MD playback, the item changes as
`follows:
`
`$
`Elapsed playback time
`
`$
`Disc name*1/Artist name*2
`
`$
`Track name*3
`
`$
`Clock
`
`$
`FM1 frequency*4
`
`*1 If you have not labelled the disc or if there is no
`disc name prerecorded on the MD, “NO NAME”
`appears in the display.
`*2 If you play a CD TEXT disc, the artist name
`appears in the display after the disc name. (Only
`for CD TEXT discs with the artist name.)
`*3 If the track name of a CD TEXT disc or MD is not
`prerecorded, “NO NAME” appears in the
`display.
`*4 While the AF/TA function is activated
`(XR-C5120R/C5110R only).
`
`18
`
`Petitioner Toyota Motor Corp. Exhibit 1010
`1010.0018
`
`

`

`Locating a specific track
`— Automatic Music Sensor (AMS)
`
`During playback, push the SEEK/AMS
`control up or down and release for each
`track you want to skip.
`
`SEEK / AMS
`
`To locate
`succeeding tracks
`
`To locate
`preceding tracks
`
`Playing tracks repeatedly
`— Repeat Play
`
`You can select:
`•REP-1 – to repeat a track.
`•REP-2 – to repeat a disc.
`
`1 During playback, press (SHIFT), then
`press (3) (PLAY MODE) repeatedly until
`“REP” appears.
`
`Locating a specific point in a track
`— Manual Search
`
`During playback, push the SEEK/AMS
`control up or down and hold. Release
`when you have found the desired point.
`
`2 Press (4) (n) repeatedly until the
`desired setting appears.
`z REP-1