3-865-814-11(1)
`
`FM/AM Cassette
`Car Stereo
`
`Operating Instructions
`
`US
`
`Owner’s Record
`The model and serial numbers are located on the bottom of the unit.
`Record the serial number in the space provided below.
`Refer to these numbers whenever you call upon your Sony dealer regarding this
`product.
`
`Model No. XR-C5120/4890 Serial No.
`
`For installation and connections, see the supplied installation/connections
`manual.
`
`XR-C5120
`XR-4890
`
` 1999 by Sony Corporation
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0001
`
`ª
`

`
`Welcome !
`Thank you for purchasing this Sony Cassette
`Player. This unit lets you enjoy a variety of
`features as well as an optional rotary
`commander.
`
`In addition to the cassette playback and radio
`operations, you can expand your system by
`connecting an optional CD/MD unit*.
`
`* You can connect a CD changer, an MD changer, a
`CD player, or an MD player
`(XR-C5120 only).
`
`Warning
`This equipment has been tested and found to
`comply with the limits for a Class B digital
`device, pursuant to Part 15 of the FCC Rules.
`These limits are designed to provide
`reasonable protection against harmful
`interference in a residential installation. This
`equipment generates, uses, and can radiate
`radio frequency energy and, if not installed
`and used in accordance with the instructions,
`may cause harmful interference to radio
`communications. However, there is no
`guarantee that interference will not occur in a
`particular installation. If this equipment does
`cause harmful interference to radio or
`television reception, which can be determined
`by turning the equipment off and on, the user
`is encouraged to try to correct the interference
`by one or more of the following measures:
`— Reorient or relocate the receiving antenna.
`— Increase the separation between the
`equipment and receiver.
`— Connect the equipment into an outlet on a
`circuit different from that to which the
`receiver is connected.
`— Consult the dealer or an experienced radio/
`TV technician for help.
`
`You are cautioned that any changes or
`modifications not expressly approved in this
`manual could void your authority to operate
`this equipment.
`
`2
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0002
`
`

`
`Table of Contents
`
`This Unit Only
`
`Location of controls ............................................ 4
`
`Getting Started
`Resetting the unit ................................................ 5
`Detaching the front panel .................................. 5
`Setting the clock .................................................. 6
`
`Cassette Player
`Listening to a tape ............................................... 7
`Playing a tape in various modes ....................... 8
`
`Radio
`Memorizing stations automatically
`— Best Tuning Memory (BTM) .................... 8
`Memorizing only the desired stations ............. 9
`Receiving the memorized stations .................... 9
`
`Other Functions
`Labeling the rotary commander ..................... 10
`Using the rotary commander .......................... 10
`Adjusting the sound characteristics ............... 12
`Attenuating the sound ..................................... 12
`Changing the sound and display settings ..... 12
`Boosting the bass sound
`— D-bass ....................................................... 13
`
`With Optional Equipment
`CD/MD Unit (XR-C5120 only)
`Playing a CD or MD ......................................... 13
`Playing tracks repeatedly
`— Repeat Play .............................................. 15
`Playing tracks in random order
`— Shuffle Play .............................................. 15
`
`Additional Information
`Precautions ......................................................... 15
`Maintenance ....................................................... 16
`Dismounting the unit ....................................... 17
`Specifications ..................................................... 18
`Troubleshooting guide ..................................... 19
`
`3
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0003
`
`

`
`Location of controls
`
`MODE
`
`SEEK / AMS
`
`SOUND
`
`SOURCE
`
`–
`
`PRESET
`DISC
`
`+
`
`6
`
`DSPL
`
`D-BASS
`
`OFF 1
`
`2
`
`3
`
`RELEASE
`
`OFF
`
`SHIFT
`
`1
`
`SET UP
`2
`
`PLAY MODE
`3
`
`4
`
`5
`
`6
`
`XR-C5120
`
`Refer to the pages listed for details.
`
`1 SEEK/AMS (seek/Automatic Music
`Sensor/manual search) control
`7, 9, 14
`2 MODE (*) button
`During tape playback:
`Playback direction change 7
`During radio reception:
`BAND select 8, 9
`During CD or MD playback*:
`CD/MD Unit select 13
`3 SOURCE (TAPE/TUNER/CD*/MD*) button
`7, 8, 9, 13
`4 Dial (volume/bass/treble/left-right/
`rear-front control) 6, 12
`5 SOUND button 12
`6 Display window
`7 DSPL (display mode change) button
`7, 9, 13, 14
`8 6 (eject) button 7
`
`9 XR-C5120:
`PRESET/DISC button
`XR-4890:
`PRST button
`During radio reception:
`Preset stations select 9
`During CD/MD playback*:
`Disc change 14
`0 RELEASE (front panel release) button
`5, 17
`!` Reset button (located on the front side
`of the unit behind the front panel) 5
`!“ OFF button 5, 7
`!£ SHIFT button
`PLAY MODE 8, 9, 15
`SET UP 6, 12, 14
`!¢ POWER SELECT switch (located on the
`bottom of the unit)
`See “POWER SELECT switch” in the
`Installation/Connections manual.
`!¥ Number buttons 9
`!⁄ D-BASS control 13
`
`* XR-C5120 only
`
`4
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0004
`
`

`
`Getting Started
`
`Attaching the front panel
`Attach part a of the front panel to part b of
`the unit as illustrated and push the left side
`into position until it clicks.
`
`Resetting the unit
`Before operating the unit for the first time or
`after replacing the car battery, you must reset
`the unit.
`Remove the front panel and press the reset
`button with a pointed object, such as a ball-
`point pen.
`
`Reset button
`
`Note
`Pressing the reset button will erase the clock
`setting and some memorized functions.
`
`Detaching the front panel
`You can detach the front panel of this unit to
`protect the unit from being stolen.
`
`1 Press (OFF).
`
`2 Press (RELEASE), then slide the front
`panel a little to the left, and pull it off
`towards you.
`
`(OFF)
`
`(RELEASE)
`
`Notes
`• Be sure not to drop the panel when detaching it
`from the unit.
`• If you detach the panel while the unit is still
`turned on, the power will turn off automatically
`to prevent the speakers from being damaged.
`• When carrying the front panel with you, use the
`supplied front panel case.
`
`a
`
`b
`
`Notes
`• Be sure not to attach the front panel upside
`down.
`• Do not press the front panel too hard against the
`unit when attaching it.
`• Do not press too hard or put excessive pressure
`on the display window of the front panel.
`• Do not expose the front panel to direct sunlight
`or heat sources such as hot air ducts, and do not
`leave it in a humid place. Never leave it on the
`dashboard of a car parked in direct sunlight or
`where there may be a considerable rise in
`temperature.
`
`Caution alarm
`If you turn the ignition key switch to the OFF
`position without removing the front panel, the
`caution alarm will beep for a few seconds
`(only when the POWER SELECT switch on the
`bottom of the unit is set to the A position).
`If you connect an optional power amplifier and
`do not use the built-in amplifier, the beep
`sound will be deactivated.
`
`5
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0005
`
`

`
`2 Press (SHIFT).
`
`The clock starts.
`
`3 Press (SHIFT).
`After the clock setting is complete, the
`display returns to normal playback mode.
`
`Note
`If the POWER SELECT switch on the bottom of the
`unit is set to the B position, turn the power on
`first, then set the clock.
`
`Setting the clock
`The clock uses a 12-hour digital indication.
`
`Example: To set the clock to 10:08
`1 Press (SHIFT), then press (2) (SET UP)
`repeatedly until “CLOCK” appears.
`
`1 Press (4) (n).
`
`The hour indication flashes.
`
`2 Set the hour.
`
`to go backward
`
`to go forward
`
`3 Press (4) (n).
`
`The minute indication flashes.
`
`4 Set the minute.
`
`to go backward
`
`to go forward
`
`6
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0006
`
`

`
`Cassette Player
`
`Listening to a tape
`
`Insert a cassette.
`Playback starts automatically.
`
`If a cassette is already inserted, press
`(SOURCE) repeatedly until “FWD” or “REV”
`appears to start playback.
`
`The side facing up is played.
`
`The side facing down is played.
`
`Tip
`To change the tape‘s playback direction, press
`(MODE) (*).
`
`To
`
`Stop playback
`Eject the cassette
`
`Press
`
`(OFF)
`6
`
`Fast-winding the tape
`
`During playback, push the SEEK/AMS
`control up or down and hold.
`
`SEEK / AMS
`
`Fast-forward
`
`Rewind
`
`To start playback during fast-forwarding or
`rewinding, press (MODE) (*).
`
`Locating a specific track
`— Automatic Music Sensor (AMS)
`
`During playback, push the SEEK/AMS
`control up or down and release for each
`track you want to skip.
`You can skip up to nine tracks at one time.
`
`SEEK / AMS
`
`To locate
`succeeding tracks
`
`To locate
`preceding tracks
`
`Note
`The AMS function may not work when:
`— the blanks between tracks are shorter than
`four seconds
`— there is noise between tracks
`— there are long sections of low volume or quiet
`sections.
`
`Changing the display item
`Each time you press (DSPL), the item changes
`as follows:
`z Tape playback z Clock
`
`Frequency* Z
`
`* While the ATA function is activated.
`
`After you select the desired item, the display
`will automatically change to the Motion
`Display mode after a few seconds.
`In the Motion Display mode, all the above
`items are scrolled in the display one by one in
`order.
`
`Tip
`The Motion Display mode can be turned off. (See
`“Changing the sound and display settings” on
`page 12).
`
`7
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0007
`
`

`
`Playing a tape in various
`modes
`You can play the tape in various modes:
`•REP (Repeat Play) repeats the current track.
`•BL SKP (Blank Skip) skips blanks longer than
`eight seconds.
`•ATA (Automatic Tuner Activation) turns on
`the tuner automatically while fast-winding
`the tape.
`
`1 During playback, press (SHIFT).
`“SHIFT-ON” appears in the display.
`
`2 Press (3) (PLAY MODE) repeatedly until
`the desired play mode appears.
`Each time you press (3) (PLAY MODE),
`the item changes as follows:
`REP n BL SKP n ATA
`
`3 Press (4) (n) to select “ON.”
`
`Play mode starts.
`
`4 Press (SHIFT).
`
`To return to normal playback mode, select
`“OFF” in step 3 above.
`
`Note
`If the “SFT” indication appears, press (SHIFT) to
`complete the mode setting.
`
`8
`
`Radio
`
`Memorizing stations
`automatically
`— Best Tuning Memory (BTM)
`
`The unit selects the stations with the strongest
`signals and memorizes them in the order of
`their frequencies. You can store up to 6 stations
`on each band (FM1, FM2, FM3, AM1, and
`AM2).
`
`Caution
`When tuning in stations while driving, use
`Best Tuning Memory to prevent accidents.
`
`1 Press (SOURCE) repeatedly to select the
`tuner.
`Each time you press (SOURCE), the source
`changes as follows:
`z TUNER
`
`z CD*
`
`TAPE Z
`
`MD* Z
`
`* If the corresponding optional equipment is
`not connected, this item will not appear
`(XR-C5120 only).
`
`2 Press (MODE) repeatedly to select the
`band.
`Each time you press (MODE), the band
`changes as follows:
`z FM1 z FM2 z FM3
`
`AM2 Z AM1 Z
`
`3 Press (SHIFT), then press (3) (PLAY
`MODE) repeatedly until “B.T.M” appears.
`
`4 Press (4) (n).
`The unit stores stations in the order of their
`frequencies on the number buttons.
`A beep sounds when the setting is stored.
`
`5 Press (SHIFT).
`
`Notes
`• The unit does not store stations with weak
`signals. If only a few stations can be received,
`some number buttons will retain their former
`setting.
`• When a number is indicated in the display, the
`unit starts storing stations from the one currently
`displayed.
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0008
`
`

`
`Memorizing only the
`desired stations
`You can preset up to 18 FM stations (6 each for
`FM1, 2, and 3) and up to 12 AM stations (6
`each for AM1 and 2) in the order of your
`choice.
`
`1 Press (SOURCE) repeatedly to select the
`tuner.
`
`2 Press (MODE) repeatedly to select the
`band.
`
`3 Push the SEEK/AMS control up or down
`to tune in the station that you want to
`store on the number button.
`
`4 Press and hold the desired number
`button ((1) to (6)) until “MEM” appears.
`The number button indication appears in
`the display.
`
`Note
`If you try to store another station on the same
`number button, the previously stored station will
`be erased.
`
`Receiving the memorized
`stations
`1 Press (SOURCE) repeatedly to select the
`tuner.
`
`2 Press (MODE) repeatedly to select the
`band.
`
`3 Press the number button ((1) to (6)) on
`which the desired station is stored.
`
`Tip
`Press either side of (PRESET/DISC) or (PRST) to
`receive the stations in the order they are stored in
`the memory (Preset Search Function).
`
`If you cannot tune in a preset
`station
`
`Push and release the SEEK/AMS control
`up or down to search for the station
`(automatic tuning).
`Scanning stops when the unit receives a
`station. Push the SEEK/AMS control up or
`down repeatedly until the desired station is
`received.
`
`Note
`If the automatic tuning stops too frequently, press
`(SHIFT), then press (3) (PLAY MODE) repeatedly
`until “LOCAL” (local seek mode) is displayed. Then
`press (4) (n) to select “LOCAL-ON.” Press (SHIFT).
`Only the stations with relatively strong signals will
`be tuned in.
`
`Tip
`If you know the frequency of the station you want
`to listen to, push the SEEK/AMS control up or
`down and hold until the desired frequency
`appears (manual tuning).
`
`If FM stereo reception is poor
`— Monaural Mode
`1 During radio reception, press (SHIFT),
`then press (3) (PLAY MODE) repeatedly
`until “MONO” appears.
`
`2 Press (4) (n) repeatedly until “MONO-
`ON“ appears.
`The sound improves, but becomes
`monaural (“ST” disappears).
`
`3 Press (SHIFT).
`
`To return to normal mode, select “MONO-
`OFF” in step 2 above.
`
`Changing the display item
`Each time you press (DSPL), the item changes
`as follows:
`Frequency (cid:247) Clock
`After you select the desired item, the display
`will automatically change to the Motion
`Display mode after a few seconds.
`In the Motion Display mode, all the above
`items are scrolled in the display one by one in
`order.
`
`Tip
`The Motion Display mode can be turned off. (See
`“Changing the sound and display settings” on
`page 12).
`
`9
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0009
`
`

`
`Other Functions
`
`You can also control this unit with an optional
`rotary commander.
`
`Labeling the rotary
`commander
`Depending on how you mount the rotary
`commander, attach the appropriate label as
`shown in the illustration below.
`
`Using the rotary
`commander
`The rotary commander works by pressing
`buttons and/or rotating controls.
`
`By pressing buttons
`(the SOURCE and MODE buttons)
`
`(SOURCE)
`
`SOUND
`MODE
`DSPL
`
`DSPL
`MODE
`SOUND
`
`(MODE)
`
`Each time you press (SOURCE), the
`source changes as follows:
`TUNER n CD* n MD*n TAPE
`Pressing (MODE) changes the operation
`in the following ways;
`• Tape :
`playback direction
`FM1 n FM2 n FM3 n AM1 n
`• Tuner :
`AM2
`• CD unit* : CD1 n CD2 n …
`• MD unit* : MD1 n MD2 n …
`* If the corresponding optional equipment is
`not connected, this item will not appear
`(XR-C5120 only).
`
`Tip
`When the POWER SELECT switch is set to position
`B, you can turn on this unit by pressing (SOURCE)
`on the rotary commander.
`
`10
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0010
`
`

`
`11
`
`By rotating the control
`(the SEEK/AMS control)
`
`Press (SOUND) to
`adjust the volume
`and sound menu.
`
`Press (DSPL) to change the
`displayed items.
`
`Changing the operative direction
`The operative direction of controls is factory-
`set as shown below.
`To increase
`
`To decrease
`If you need to mount the rotary commander on
`the right hand side of the steering column, you
`can reverse the operative direction.
`
`Rotate the control and release it to:
`•Locate the beginnings of tracks on the
`tape. Rotate and hold the control, and
`release it to fast-wind the tape. To start
`playback while fast-winding the tape,
`press (MODE).
`•Locate a specific track on a disc. Rotate
`and hold the control until you locate the
`specific point in a track, then release it to
`start playback (XR-C5120 only).
`•Tune in stations automatically. Rotate and
`hold the control to find a specific station.
`
`By pushing in and rotating the
`control (the PRESET/DISC control)
`
`Push in and rotate the control to:
`•Receive the stations memorized on the
`number buttons.
`•Change the disc (XR-C5120 only).
`
`Other operations
`
`Rotate the VOL control to
`adjust the volume.
`
`Press (SOUND) for two seconds while
`pushing the VOL control.
`
`Tip
`You can also change the operative direction of
`these controls with the unit (page 12).
`
`Press (ATT) to
`attenuate the
`sound.
`
`OFF
`
`Press (OFF) to turn
`off the unit.
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0011
`
`

`
`Adjusting the sound
`characteristics
`You can adjust the bass, treble, balance, and
`fader.
`You can store the bass and treble levels
`independently for each source.
`
`1 Select the item you want to adjust by
`pressing (SOUND) repeatedly.
`VOL (volume) n BAS (bass) n
`TRE (treble) n BAL (left-right) n
`FAD (front-rear)
`
`2 Adjust the selected item by rotating the
`dial.
`Adjust within three seconds after selecting
`the item. (After three seconds, the dial
`function reverts to volume control.)
`
`Attenuating the sound
`
`Press (ATT) on the optional rotary
`commander or wireless remote.
`“ATT-ON” flashes momentarily.
`
`To restore the previous volume level, press
`(ATT) again.
`
`Changing the sound and
`display settings
`The following items can be set:
`•CLOCK (page 6).
`•BEEP – to turn the beep sound on or off.
`•RM (Rotary Commander) – to change the
`operative direction of the rotary commander.
`— Select “NORM” to use the rotary
`commander as the factory-set position.
`— Select “REV” when you mount the rotary
`commander on the right side of the
`steering column.
`•M.DSPL – to turn the Motion Display on or
`off.
`•A.SCRL (Auto Scroll)* (page 14).
`1 Press (SHIFT).
`
`2 Press (2) (SET UP) repeatedly until the
`desired item appears.
`
`Each time you press (2) (SET UP), the item
`changes as follows:
`CLOCK n BEEP n RM n M.DSPL n A.SCRL*
`* When no MD is playing, this item will not
`appear (XR-C5120 only).
`
`Note
`The displayed item will differ depending on
`the source.
`
`3 Press (4) (n) to select the desired
`setting (Example: ON or OFF).
`
`4 Press (SHIFT).
`After the mode setting is complete, the
`display returns to normal playback mode.
`
`Note
`If the “SFT” indication appears, press (SHIFT) to
`complete the mode setting.
`
`12
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0012
`
`

`
`With Optional Equipment
`CD/MD Unit (XR-C5120 only)
`
`This unit can control a maximum of ten
`external CD/MD units in this configuration:
`CD unit – maximum of five
`MD unit – maximum of five
`Any combination up to ten will work.
`
`Playing a CD or MD
`1 Press (SOURCE) repeatedly to select CD
`or MD.
`
`2 Press (MODE) until the desired unit
`appears.
`CD/MD playback starts.
`
`When a CD/MD unit is connected, all the
`tracks play from the beginning.
`
`Changing the display item
`Each time you press (DSPL) during CD, or
`MD playback, the item changes as follows:
`
`$
`Elapsed playback time
`
`$
`Disc name*1
`
`$
`Track name*2
`
`$
`Clock
`
`*1 If there is no disc name prerecorded on the MD,
`“NO NAME” appears in the display.
`*2 If the track name of an MD is not prerecorded,
`“NO NAME” appears in the display.
`
`After you select the desired item, the display
`will automatically change to the Motion
`Display mode after a few seconds.
`In the Motion Display mode, all the above
`items are scrolled in the display one by one in
`order.
`
`Tip
`The Motion Display mode can be turned off. (See
`“Changing the sound and display settings” on
`page 12).
`
`13
`
`Boosting the bass sound
`— D-bass
`
`You can enjoy a clear and powerful bass
`sound. The D-bass function boosts the low
`frequency signal with a sharper curve than
`conventional bass boost.
`You can hear the bass line more clearly even
`while the vocal volume remains the same. You
`can emphasize and adjust the bass sound
`easily with the D-BASS control.
`
`D-BASS 3
`
`D-BASS 2
`
`D-BASS 1
`
`Level
`
`0dB
`
`Frequency (Hz)
`
`Adjusting the bass curve
`Turn the D-BASS control to adjust the
`bass level (1, 2, or 3).
`“D-BASS” appears in the display.
`
`To cancel, turn the control to OFF.
`
`Note
`If the bass sound becomes distorted, adjust the
`D-BASS control or volume.
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0013
`
`

`
`Automatically scrolling a disc name
`— Auto Scroll
`If the disc name or track name on an MD
`exceeds 8 characters and the Auto Scroll
`function is on, information automatically
`scrolls across the display as follows:
`• The disc name appears when the disc has
`changed (if the disc name is selected).
`• The track name appears when the track has
`changed (if the track name is selected).
`
`If you press (DSPL) to change the display
`item, the disc or track name of the MD is
`scrolled automatically whether you set the
`function on or off.
`
`1 During playback, press (SHIFT).
`
`2 Press (2) (SET UP) repeatedly until
`“A.SCRL” appears.
`
`3 Press (4) (n) to select “A.SCRL-ON.”
`
`4 Press (SHIFT).
`
`To cancel Auto Scroll, select “A.SCRL-OFF” in
`step 3 above.
`
`Note
`For some MDs with very many characters, the
`following cases may happen:
`— Some of the characters are not displayed
`— Auto Scroll does not work.
`
`Tip
`To manually scroll the long name of an MD after
`activating the Auto Scroll function, press (SHIFT),
`then (1) (N) (manual scroll).
`
`Locating a specific track
`— Automatic Music Sensor (AMS)
`
`During playback, push the SEEK/AMS
`control up or down and release for each
`track you want to skip.
`
`SEEK / AMS
`
`To locate
`succeeding tracks
`
`To locate preceding
`tracks
`
`Locating a specific point in a track
`— Manual Search
`
`During playback, push the SEEK/AMS
`control up or down and hold. Release
`when you have found the desired point.
`
`SEEK / AMS
`
`To search forward
`
`To search backward
`
`Changing Discs
`
`During playback, press either side of
`(PRESET/DISC) momentarily.
`The desired disc in the current unit begins
`playback.
`
`–
`
`PRESET +
`DISC
`
`For preceding
`discs
`
`For succeeding
`discs
`
`Disc
`
`Track number
`
`14
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0014
`
`

`
`Playing tracks repeatedly
`— Repeat Play
`
`Additional
`Information
`
`Precautions
`• If your car was parked in direct sunlight
`resulting in a considerable rise in temperature
`inside the car, allow the unit to cool off before
`operating it.
`• If no power is being supplied to the unit,
`check the connections first. If everything is in
`order, check the fuse.
`• If no sound comes from the speakers of a
`two-speaker system, set the fader control to
`the center position.
`• When the tape is played back for a long
`period, the cassette may become warm
`because of the built-in power amplifier.
`However, this is not a sign of malfunction.
`
`If you have any questions or problems
`concerning your unit that are not covered in
`this manual, please consult your nearest Sony
`dealer.
`
`To maintain high quality sound
`If you have drink holders near your audio
`equipment, be careful not to splash juice or
`other soft drinks onto the car audio. Sugary
`residues on this unit or cassette tapes may
`contaminate the playback heads, reduce the
`sound quality, or prevent sound reproduction
`altogether.
`Cassette cleaning kits cannot remove sugar
`from the tape heads.
`
`You can select:
`•REP-1 – to repeat a track.
`•REP-2 – to repeat a disc.
`
`1 During playback, press (SHIFT), then
`press (3) (PLAY MODE) repeatedly until
`“REP” appears.
`
`2 Press (4) (n) repeatedly until the
`desired setting appears.
`z REP-1 z REP-2
`
`REP-OFF Z
`
`Repeat Play starts.
`
`3 Press (SHIFT).
`
`To return to normal playback mode, select
`“REP-OFF” in step 2 above.
`
`Playing tracks in random
`order — Shuffle Play
`You can select:
`•SHUF-1 – to play the tracks on the current
`disc in random order.
`•SHUF-2 – to play the tracks in the current
`unit in random order.
`•SHUF-ALL – to play all the tracks in all the
`units in random order.
`
`1 During playback, press (SHIFT), then
`press (3) (PLAY MODE) repeatedly until
`“SHUF” appears.
`
`2 Press (4) (n) repeatedly until the
`desired setting appears.
`z SHUF-1
`
`z SHUF-2
`
`SHUF-OFF Z
`Shuffle Play starts.
`
`3 Press (SHIFT).
`
` SHUF-ALL Z
`
`To return to normal playback mode, select
`“SHUF-OFF” in step 2 above.
`
`15
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0015
`
`

`
`Notes on Cassettes
`Cassette care
`• Do not touch the tape surface of a cassette, as
`any dirt or dust will contaminate the heads.
`• Keep cassettes away from equipment with
`built-in magnets such as speakers and
`amplifiers, as erasure or distortion on the
`recorded tape could occur.
`• Do not expose cassettes to direct sunlight,
`extremely cold temperatures, or moisture.
`• Slack in the tape may cause the tape to be
`caught in the machine. Before you insert the
`tape, use a pencil or a similar object to turn
`the reel and take up any slack.
`
`Maintenance
`Fuse Replacement
`When replacing the fuse, be sure to use one
`matching the amperage rating stated on the
`original fuse. If the fuse blows, check the
`power connection and replace the fuse. If the
`fuse blows again after replacement, there may
`be an internal malfunction. In such a case,
`consult your nearest Sony dealer.
`
`Fuse (10 A)
`
`Slack
`
`• Distorted cassettes and loose labels can cause
`problems when inserting or ejecting tapes.
`Remove or replace loose labels.
`
`Warning
`Never use a fuse with an amperage rating
`exceeding the one supplied with the unit as
`this could damage the unit.
`
`• The sound may become distorted while
`playing the cassette. The cassette player head
`should be cleaned after each 50 hours of use.
`
`Cassettes longer than 90 minutes
`The use of cassettes longer than 90 minutes is
`not recommended except for long continuous
`play. The tape used for these cassettes is very
`thin and tends to stretch easily. Frequent
`playing and stopping of these tapes may cause
`them to become entangled in the cassette deck
`mechanism.
`
`16
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0016
`
`

`
`Cleaning the Connectors
`The unit may not function properly if the
`connectors between the unit and the front
`panel are not clean. In order to prevent this,
`open the front panel by pressing (RELEASE),
`then detach it and clean the connectors with a
`cotton swab dipped in alcohol. Do not apply
`too much force. Otherwise, the connectors may
`be damaged.
`
`Dismounting the unit
`1
`
`Release key (supplied)
`
`2
`
`3
`
`4
`
`Main unit
`
`Back of the front panel
`
`Notes
`• For safety, turn off the engine before cleaning
`the connectors and remove the key from the
`ignition switch.
`• Never touch the connectors directly with your
`fingers or with any metal device.
`
`17
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0017
`
`

`
`Specifications
`AUDIO POWER SPECIFICATIONS
`POWER OUTPUT AND TOTAL HARMONIC DISTORTION
`17 watts (for XR-C5120)/13 watts (for XR-4890) per channel
`minimum continuous average power into 4 ohms, 4 channels
`driven from 20 Hz to 20 kHz with no more than 1 % total
`harmonic distortion.
`Other specifications
`
`Cassette player section
`Tape track
`4-track 2-channel stereo
`Wow and flutter
`0.08 % (WRMS)
`Frequency response
`30 – 18,000 Hz
`Signal-to-noise ratio
`58 dB
`
`General
`Outputs
`
`Tone controls
`
`Power requirements
`
`Dimensions
`
`Mounting dimensions
`
`Mass
`Supplied accessories
`
`Optional accessories
`
`Optional equipment
`
`Audio output
`Power antenna relay
`control lead
`Power amplifier control
`lead
`Bass –8 dB at 100 Hz
`Treble –8 dB at 10 kHz
`12 V DC car battery
`(negative ground)
`Approx. 188 · 58
` 181 mm
`(7 1/2 · 2 3/8 · 7 1/4 in.)
`(w/h/d)
`Approx. 182 · 53
` 164 mm
`(7 1/4 · 2 1/8 ·
` 6 1/2 in.)
`(w/h/d)
`Approx. 1.2 kg (2 lb 10 oz)
`Parts for installation and
`connections (1 set)
`Front panel case (1)
`Rotary commander
`RM-X4S
`XR-C5120:
`BUS cable (supplied with
`an RCA pin cord)
`RC-61 (1 m), RC-62 (2 m)
`XR-C5120:
`CD changer (10 discs)
`CDX-828, CDX-727
`MD changer (6 discs)
`MDX-65
`Other CD/MD changers
`with the Sony-BUS system
`Source selector
`XA-C30
`
`Tuner section
`FM
`Tuning range
`Antenna terminal
`Intermediate frequency
`Usable sensitivity
`Selectivity
`Signal-to-noise ratio
`
`87.5 – 107.9 MHz
`External antenna connector
`10.7 MHz
`9 dBf
`75 dB at 400 kHz
`65 dB (stereo),
`68 dB (mono)
`Harmonic distortion at 1 kHz
`0.7 % (stereo),
`0.4 % (mono)
`35 dB at 1 kHz
`30 – 15,000 Hz
`
`Separation
`Frequency response
`
`AM
`Tuning range
`Antenna terminal
`Intermediate frequency
`Sensitivity
`
`530 – 1,710 kHz
`External antenna connector
`10.7 MHz/450 kHz
`30 m V
`
`Power amplifier section
`Outputs
`Speaker outputs
`(sure seal connectors)
`4 – 8 ohms
`Speaker impedance
`Maximum power output XR-C5120:
`40 W · 4 (at 4 ohms)
`XR-4890:
`35 W · 4 (at 4 ohms)
`
`18
`
`Design and specifications are subject to change
`without notice.
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0018
`
`·
`·
`

`
`Troubleshooting guide
`The following checklist will help you remedy the problems you may encounter with your unit.
`Before going through the checklist below, check the connections and operating procedures.
`
`General
`Problem
`No sound.
`
`The contents of the memory
`have been erased.
`
`Indications do not appear in the
`display.
`
`Tape playback
`Problem
`The sound is distorted.
`
`The AMS does not operate
`correctly.
`
`Cause/Solution
`•Cancel the ATT function.
`•Set the fader control to the center position for two-speaker
`systems.
`•Rotate the dial clockwise to adjust the volume.
`• The power cord or battery has been disconnected.
`• The reset button was pressed.
`n Store again into the memory.
`Remove the front panel and clean the connectors. See
`“Cleaning the connectors” (page 17) for details.
`
`Cause/Solution
`
`The tape head is contaminated.
`n Clean the head with a commercially available dry-type
`cleaning cassette.
`• There is noise in the space between tracks.
`• The blank space is too short (less than four seconds).
`• The SEEK/AMS control was pushed up immediately before
`the following track.
`• The SEEK/AMS control was pushed down immediately after
`the track starts.
`• A long pause, or a passage of low frequencies or very low
`sound level is treated as a blank space.
`
`Radio reception
`Problem
`Preset tuning is not possible.
`
`Automatic tuning is not
`possible.
`The “ST” indication flashes.
`
`Cause/Solution
`• Memorize the correct frequency.
`• The broadcast signal is too weak.
`The broadcast signal is too weak.
`n Use manual tuning.
`•Tune in the frequency accurately.
`•The broadcast signal is too weak.
`n Set to MONO mode (page 9).
`
`CD/MD playback
`Problem
`The sound skips.
`
`Cause/Solution
`A dirty or defective disc.
`
`19
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0019
`
`

`
`Error displays (when an optional CD/MD unit is connected) (XR-C5120 only)
`The following indications will flash for about five seconds, and an alarm sound will be heard.
`Solution
`
`Cause
`
`The disc magazine is not inserted in
`the CD/MD unit.
`No disc is inserted in the CD/MD unit.
`
`Insert the disc magazine in the CD/
`MD unit.
`Insert discs in the CD/MD unit.
`
`A CD/MD cannot play because of
`some problem.
`A CD is dirty or inserted upside
`down.*2
`An MD does not play because of some
`problem.*2
`No tracks have been recorded on an
`MD.*2
`The CD/MD unit cannot be operated
`because of some problem.
`The lid of the MD unit is open or MDs
`are not inserted properly.
`The ambient temperature is more than
`50(cid:176) C (122(cid:176) F).
`
`Insert another CD/MD.
`
`Clean or insert the CD correctly.
`
`Insert another MD.
`
`Play an MD with tracks recorded on
`it.
`Press the reset button of the unit.
`
`Close the lid or insert the MDs
`properly.
`Wait until the temperature goes
`down below 50(cid:176) C (122(cid:176) F).
`
`Display
`NO MAG
`NO DISC
`NG DISCS
`
`ERROR
`
`*1
`
`*1
`
`BLANK
`RESET
`NO READY
`HI TEMP
`
`*1 When an error occurs during playback of a CD or MD, the disc number of the CD or MD does not appear
`in the display.
`*2 The disc number of the disc causing the error appears in the display.
`
`If the above-mentioned solutions do not help improve the situation, consult your nearest Sony
`dealer.
`
`20
`Sony Corporation Printed in Thailand
`
`Petitioner Toyota Motor Corp. Ex. 1005
`1005.0020