`
`Date : 08.19.2016.
`
`1. PRODUCT AND COMPANY INFORMATION
`Product Name : Tavaborole, 98%
`Product No.
`: SL-264
`Product Use : For laboratory research use only, not for drug, household or other
`uses.
`Manufacture & Supplier : SynInnova Laboratories Inc,
`4-105A NINT Innovation Center,
`11421 Saskatchewan Drive,
`Edmonton, AB, Canada T6G 2M9.
`Tel : 780 485 2962, Fax : 780 485 2963
`e-mail : sales@syninnova.com, www.syninnova.com
`2. HAZARDS IDENTIFICATION
`Hazardous statement(s) : H301 : May toxic if swallowed
`H315 : Causes skin irritation
`H319 : Causes serious eye irritation
`H335 : May cause respiratory irritation
`Precautionary statement(s) : P301 + P310 IF SWALLOWED : Immediately call a POISON CENTER or
`doctor/ physician.
`P261 : Avoid breathing dust/fume/gas/mist/vapours/spray.
`P305+P351+P338 :
`IF IN EYES: Rinse cautiously with water for
`several minutes. Remove contact lenses if present and easy to do -
`continue rinsing.
`Inhalation : May be harmful if inhaled. May cause respiratory tract
`irritation.
`Skin : May be harmful
`irritation.
`Eyes : May cause eye irritation.
`Ingestion : May be harmful if swallowed.
`3. COMPOSITION / INFORMATION ON INGREDIENTS
`Ingredient Name : Tavaborole
`Synonym : AN2690
`CAS No.
`: 174671-46-6
`Molecular formula : C7H6BFO2
`Molecular weight : 151.93
`Chemical concentration : <=100%
`
`if absorbed through skin. May cause skin
`
`Potential Health Effects :
`
`www.syninnova.com
`
`page 1/3
`
`4-105A NINT Innovation Center,
`11421 Saskatchewan Drive,
`Edmonton, AB, Tel : +1 780 485 2962
`Canada T6G 2M9. Fax : +1 780 485 2963
`E-mail: sales@syninnova.com
`.
`
`CFAD v. Anacor, IPR2015-01776, CFAD EXHIBIT 1068 - Page 1 of 3
`
`
`
`4. FIRST AID MEASURES
`
`Eye contact :
`
`Skin contact :
`
`Immediately wash skin with copious amounts of water for at least 15
`minutes while removing contaminated clothing and shoes.
`If
`irritation persists, seek medical attention.
`Immediately wash skin with copious amounts of water for at least 15
`minutes. Assure adequateflushing of the eyes by separating the
`eyelids with fingers. If irritation persists, seek medicalattention.
`Inhalation : Remove to fresh air. In severe cases or if symptoms persist, seek
`medical attention.
`Ingestion : Wash out mouth with copious amounts of water for at least 15
`minutes. Seek medical attention.
`5. FIRE FIGHTING MEASURES
`
`In the event of a fire involving this material, alone or in combination
`with other materials, use dry powder or
`carbon dioxide
`extinguishers. Protective clothing and self-contained breathing
`apparatusshould be worn.
`6. ACCIDENTAL RELEASE MEASURES
`
`Personal precautions : Wear suitable personal protective equipment which performs satisfactorily
`and meets local/state/national standards.
`Respiratory precaution : Wear approved mask/respirator
`
`Hand precaution : Wear suitable gloves/gauntlets
`
`Skin protection : Wear suitable protective clothing
`
`Eye protection : Wear suitable eye protection
`
`Methods for cleaning up : Mix with sand or similar inert absorbent material, sweep up and keep in a
`tightly closed container for disposal. See section 12.
`Environmental precautions : Do not allow material to enter drains or watercourses.
`
`7. HANDLING AND STORAGE
`
`Handling : This product should be handled only by, or under the close supervision of,
`those properly qualifiedin the handling and use of potentially hazardous
`chemicals, who should take into account the fire,health and chemical hazard
`data given on this sheet.
`Storage : Keep container tightly closed under nitrogen or argon and kept at -20oC for
`long-term storage.
`8. EXPOSURE CONTROLS / PERSONAL PROTECTION
`
`Engineering Controls : Use only in a chemical fume hood.
`
`Personal protective equipment : Wear laboratory clothing, chemical-resistant gloves, safety goggles and
`appropriate respirator mask.
`General hygiene measures : Wash thoroughly after handling. Wash contaminated clothing before reuse.
`
`www.syninnova.com
`
`page 2/3
`
`4-105A NINT Innovation Center,
`11421 Saskatchewan Drive,
`Edmonton, AB, Tel : +1 780 485 2962
`Canada T6G 2M9. Fax : +1 780 485 2963
`E-mail: sales@syninnova.com
`.
`
`CFAD v. Anacor, IPR2015-01776, CFAD EXHIBIT 1068 - Page 2 of 3
`
`
`
`9. PHYSICAL AND CHEMICAL PROPERTIES
`
`Appearance : White solid
`Boiling point : No data available
`Melting point : 118-120oC
`Flash point : No data available
`Density : No data available
`10. STABILITY AND REACTIVITY
`
`Conditions to avoid : Heat, flames and sparks.
`Materials to avoid : Strong-oxidizing agents.
`: Carbon dioxide, Carbon monoxide, nitrogen oxides (NOx), and other
`Possible hazardous
`decomposition products.
`combustion products
`11. TOXICOLOGICAL INFORMATION
`
`12. ECOLOGICAL INFORMATION
`
`No data available
`
`No data available
`
`13. DISPOSAL CONSIDERATION
`
`Arrange disposal as special waste, by licensed disposal company, in
`consultation with local waste disposal authority, in accordance with
`national and regional regulations.
`14. TRANSPORTATION INFORMATION
`
`Non-hazardous for air and ground transportation.
`
`15. REGULATORY INFORMATION
`
`16. OTHER INFORMATION
`
`This product has been classified in accordance with the hazard
`criteria of
`the Controlled Products Regulations and the MSDS
`contains all the information required by the Controlled Products
`Regulations.
`
`This MSDS is correct to the best of our knowledge at the date of
`publication but we cannot accept liability for any loss, injury or
`damage, which may result from its use.
`
`Powered by TCPDF (www.tcpdf.org)
`
`www.syninnova.com
`
`page 3/3
`
`4-105A NINT Innovation Center,
`11421 Saskatchewan Drive,
`Edmonton, AB, Tel : +1 780 485 2962
`Canada T6G 2M9. Fax : +1 780 485 2963
`E-mail: sales@syninnova.com
`.
`
`CFAD v. Anacor, IPR2015-01776, CFAD EXHIBIT 1068 - Page 3 of 3