If
`
`UNITED STATES DEPARTMENT Of? COMMERCE
`Patent end trademark Office
`„
`' ■ .
`
`NOTICE OF ALLOWANCE AND ISSUE FEE DUE
`
`RAYMOND f JOAO
`122 BELLEVUE PLACE
`YONKERS i'Y 10203
`
`■
`
`WM01/0604
`'
`•
`’
`
`.
`
`.
`
`'
`
`.
`
`■ .
`
`•
`
`'
`
`.
`
`'
`
`'
`
`,
`
`'
`
`'
`
`.
`
`APPLICATION NO:
`
`|
`
`. fflUNQ DATE''
`
`- . .TOTAL CLAIMS : | . .-
`
`' EXAVBN6R AND QROUP ART UNIT ,
`
`'
`
`1 •"' DATE MAILED' - ■
`
`,
`
`09/277,9'.; 5
`RrstNamed , .
`’
`Applicant
`JOAO;. •
`
`03/29/95
`
`003 .
`
`TRIEU, V‘
`
`'
`
`2632’
`
`06/04/0.1
`
`.. 35 use 154 <b) term ext., «
`
`.0 Days. .
`
`.
`
`.
`
`mvraitnNREMOTE-COfiTROLLED CONTROL, MONITORING AND 7 OR SECURITY ..APPARATUS AND
`METHOD <~QI: VEHICLES, MOTOR VEHICLES, MARINE VESSELS AND VEHICLES, .■
`, RESIDENTIAL PREMISES AND / OR
`RECREATIONAL VEHICLES
`AIRCRAFT,
`1. PREMISES
`•
`.
`' COMMERCIA
`| ' -pLASSeUBCLASS. ,
`. eATQH NO:,;. '• I,'.Appln.-type ... |.- SMALL* ENTITY-: |' FEE DUE ; |
`- attvs.docket.no..
`
`.
`
`DATE DUE i
`
`:
`
`RJ01S
`
`'
`
`340-539.000
`
`. HQ9- UTILITY
`
`YES
`
`*620.00 •
`
`09/04/01
`
`THE APPLICATION IDENTIFIED ABOVE HAS BEEN EXAMINED AND IS ALLOWED FOR ISSUANCE AS A' PATENT.
`PROSECUTION ON THE MERITS IS CLOSED; y
`.
`
`THE ISSUE.FEE MUST BE PAID WITHIN THREE MONTHS FROM THE MAILING DATE OF THIS NOTICE OR THIS
`APPLICATION SHALL BE REGARDED AS ABANDONED^ THIS STATUTORY PERIOP CANNOT BE EXTENDED:
`
`I
`
`"Ii
`
`\
`
`I
`(
`I
`
`■4
`
`HOW TO RESPOND TO THIS NOTICE:
`I. Review the'SMALL ENTITY status shown above; -
`If the SMALL ENTITY is shown as YES, verify your
`current SMALL ENTITY status:
`
`A. If the-status Is changed, pay twice the amount.of the
`FEE DUE shown above and notify the Patent and .
`Trademark Office of the change in status, or
`B. If the status is the same, pay the FEE DUE shown
`above.
`, .
`"
`"■
`
`It the SMALL ENTITY is shown as NO:
`
`,]: A. Pay FEE DUE shown.aboye, dr .
`
`B. File verified statement of.Small Entity Status before, or with,
`payment of i/2 the FEE DUE shown above.
`II. Part B-lssue Fee Transmittal should be completed.andTeturned to the Patent and Trademark Office (PTO) with your '•
`ISSUE FEE. Even. if the, ISSUE FEE has already, been paid by charge-to deposit.acdount, Parts Issue Fee Transmittal
`should becompleted and returned, If you are.eharglng the. ISSUE.FEE to your deposit account, section-“4b" of Part
`B-lssue Fee Transmittal should be completed and an extra copy ofthe form should be submitted.
`III; All communlcalipns regarding this eppllcation;must, giveapplication number-and batch number. ••
`. Please direct a.ll;communieatl<5hs;piidr.toisstiance'tC!Bdx.lS.SUE.FEE unless advised;to the contrary. •
`
`■
`
`•.
`
`IMPORTANT REMINDER: Utility patents Issuing on applications filed pn or after Dec. 12; 1980 May require payment of
`■
`. maintenance fees; It Is patentee’s responsibility, to ensure timely payment of maintenance
`.
`-.
`-. ■■ fees when. due. ■■■■■:
`.. .•
`PATENT AND TRADEMARK OFFICE COPY
`PTOL-85(REV. 10-96)Apnravsdte.usw IhrouBhOMJO/99.(0051-0033)
`■ . . ' -
`
`,
`
`■
`
`JCCOX-004079
`
`Petitioners - Exhibit 1005 Page 1
`
`

`

`Notice of Allowability
`
`Application No.
`
`Applicant(s)
`
`09/277,935
`Examiner
`
`Van TTrieu
`
`JOAO, RAYMOND ANTHONY
`Art Unit
`
`2632
`
`The MAILING DATE of this communication appears on the cover sheet with the correspondence address-
`All claims being allowable, PROSECUTION ON THE MERITS IS (OR REMAINS) CLOSEO In this application, If not Included.
`herewith (or previously mailed), a Notice of Allowance and Ibsus Fee Due or other appropriate communication will be mailed in due course.
`THIS NOTICE OF ALLOWABILITY IS NOT A GRANT OF PATENT RIGHTS. This application Is subject to withdrawal from Issue at the
`initiative of the Office or upon petition by the applicant. See 37 CFR 1.313 and MPEP 1308.
`
`1. □ This communication Is responsive to the Supplemental Amendment tiled on May 17. 2001.
`2. (3 The allowed claim(s) is/are 21-53.
`3. □ The drawings filed on_____ are acceptable as formal drawings.
`4. □ Acknowledgment is made of a claim for foreign priority under 35 U.S.C. s 119(a)-(d) or (f).
`a) □ All bjQSome* c) □ None of the:'
`.
`1. □ Certified copies of the priority documents have been received.
`'
`2. Q Certified copies of the priority documents have been received in Application No._____ .
`3. □ Copies of the certified copies of the priority documents have been received in this national stage application from the
`International Bureau (PCT Rule 17.2(a)).
`1
`* Certified copies not received:_____ .
`5. □ Acknowledgement is made of a claim for domestic priority under 35 U.S.C. § 119(e).
`
`.
`
`Applicant has THREE MONTHS FROM THE ‘MAILING DATE” of this communication to file a reply complying with the requirements noted
`below. Failure to timely comply will result In ABANDONMENT of this application. THIS THREE-MONTH PERIOD IS NOT EXTENDABLE
`FOR SUBMITTING NEW FORMAL DRAWINGS , OR A SUBSTITUTE OATH OR DECLARATION. This three-month period for
`complying with the REQUIREMENT FOR THE DEPOSIT OF BIOLOGICAL MATERIAL Is extendable under 37 CFR 1.136(a).
`
`6. □ Note the attached EXAMINER'S AMENDMENT or NOTICE OF INFORMAL APPLICATION (PTO-152) which gives reason(s) why
`the oath or declaration Is deficient. A SUBSTITUTE OATH OR DECLARATION IS REQUIRED.
`
`.
`'
`7. E] Applicant MUST submit NEW FORMAL DRAWINGS
`(a) □ including changes required by the Notice of Draltsperson's Patent Drawing Revlew( PTO-948) attached
`1) □ hereto or 2) El to Paper No. Z'
`(b) El Including changes required by the proposed drawing correction filed 17 May 2001. which has been approved by the examiner.
`(c) O including changes required by the attached Examiner's Amendment / Comment or in the Office action of Paper No._____ .
`
`.
`
`Identifying indicia such as the application number (see 37 CFR 1.84(c)) should be written on the drawings. The drawings
`should be filed as a separate paper with a transmittal letter addressed to the Official Draftsperson.
`
`8. O Note the attached Examiner's comment regarding REQUIREMENT FOR THE DEPOSIT OF BIOLOGICAL MATERIAL..
`
`Any reply to this letter should include, In the upper right hand corner, the APPLICATION NUMBER (SERIES CODE / SERIAL NUMBER). If
`applicant has received a Notice of Allowance and Issue Fee Due, the ISSUE BATCH NUMBER and DATE ofthe NOTICE OF
`.
`ALLOWANCE should also be included. •
`.
`■
`
`Attaohment(s)
`
`1 □ Notice of References Cited (PTO-892)
`3D Notice of Draftperson's Patent Drawing Review (PTO-948)
`5D Information Disclosure Statements (PTO-1449), Paper No.
`7D Examiner's Comment Regarding Requirement for Deposit
`of Biological Material .
`'
`
`2D Notice of Informal Patent Application (PTO-152)
`4D Interview Summary (PTO-413), Paper No.____ .
`6D Examiner's Amendment/Comment
`8ISJ Examiner’s Statement of Reasons for Allowance
`9D Other .
`
`U,S. Patent and Trademark Office '
`PTO-37 (Rev. 01-01)
`
`..... •
`
`Notice of Allowability
`
`Part of Paper No. 18 .
`
`JCCOX-004074
`
`Petitioners - Exhibit 1005 Page 2
`
`

`

`t
`
`/ '
`
`Appl/oailon/Control Number: 99/277,935
`Art Unit: 2932
`
`Page 2
`
`DETAILED ACTION
`
`Allowable Subject Matter
`
`The following is an examiner's statement of reasons for allowance: there are no
`
`references teaching of a control apparatus for controlling of at least one of activating,
`
`deactivating, enabling and disabling of at least one of a premises having at least one of
`
`system, subsystem, component, equipment and appliance, wherein the first control
`
`device is responsive to a second signal and the second signal is at least generated by a
`
`a second control device which is located remote from the premises. And further
`
`wherein the second control device is responsive to a third signal which is generated by
`
`a third control device which is located at a location remote from the premises and
`
`remote from the second control device.
`
`. Any comments considered necessary by applicant must be submitted no later
`
`than the payment of the issue fee and, to avoid processing delays, should preferably,
`
`accompany the issue fee. Sucfi submissions should be clearly labeled "Comments on
`
`Statement of Reasons for Allowance."
`
`1,
`
`Any inquiry concerning this communication or earlier communications from
`
`the examiner should be directed to examiner Van Trieu whose telephone number is
`
`(703) 308-5220. The examiner can normally be reached on Mon-Fri from 7:00 am to
`
`4:00 pm.
`
`JCCOX-004075
`
`Petitioners - Exhibit 1005 Page 3
`
`

`

`Application/Control Number;' 09/277,935
`
`Art Unit: 2632
`
`Page 3
`
`If attempts to reach the examiner by telephone are unsuccessful, the examiner's
`
`supervisor, Mr. Jeffery Hofsass, can be reached on (703) 305-4717. The office
`
`facsimile number is (703) 308-6743. Any inquiry of a general nature or relating to the
`
`status of this application or proceeding should be directed to the Group receptionist
`
`whose telephone number is (703)305-4700, Mon-Fri, 8:30 am to 5:00 pm.
`
`Primary Examiner: Van Trieu
`Group:2632
`Date: 05/30/01
`
`Petitioners - Exhibit 1005 Page 4
`
`

`

`I hereby certify that this correspondence is being hand
`delivered to the United States Patent and Trademark Office
`on August 19,. 2002.
`'
`!
`
`RJ015
`
`IN THE UNITED STATES PATENT AND TRADEMARK OFFICERS’
`— rr,cso
`IS
`CO co
`
`:vm.'COCO
`
`TOm
`om
`•c
`mo
`
`APPLICANT : RAYMOND A. JOAO
`SERIAL NO.: 09/277,935
`FILED : MARCH 29, 1999
`FOR
`: CONTROL APPARATUS AND METHOD FOR VEHICLES
`AND/OR FOR PREMISES.
`■
`EXAMINER : V. TRIEU
`GROUP
`! 2632
`ALLOWED : AUGUST 6, 2002
`CONFIRMATION NO.: 4303
`
`■
`
`'
`
`Box ISSUE FEE
`Commissioner for Patents
`Washington, D.C. 20231
`
`COMMENTS ON STATEMENT OF REASONS FOR ALLOWANCE
`
`Sir:
`
`This is Applicant's Comments on Statement of Reasons
`.
`for Allowance in the above-identified application. Entry
`
`JCCOX-004520
`
`Petitioners - Exhibit 1005 Page 5
`
`

`

`of this Comments on Statement of Reasons for Allowance is
`respectfully requested.
`
`■
`
`Regarding Claim 21, Applicant respectfully
`•
`submits that the prior art does not disclose or suggest
`a. control apparatus, comprising: a first control device,
`wherein the first control device at least one of generates
`and transmits a first signal for at least one of
`activating, de-activating, disabling, and re-enabling, at
`least one of a premises system, a premises device, a
`premises equipment, a premises equipment system, and a
`premises appliance, of a premises, wherein the first
`control device is located at the premises, wherein the
`first control device is responsive to a second signal,
`wherein the second signal is at least one of generated by
`and' transmitted from a second control device, wherein the
`second control device is located at a location which is
`remote from the premises, wherein the second signal is
`transmitted from the second control device to the first
`control device, and further wherein the second signal is
`automatically .received by the first control device, wherein
`the second control device is responsive to a third signal,
`wherein the third signal is at least one- of generated by
`and transmitted from a third control device, wherein the
`
`’ 2
`
`JCCOX-004521
`
`Petitioners - Exhibit 1005 Page 6
`
`

`

`third control device is located at a location which is
`remote from the premises and remote from the second control
`device, wherein the third signal is transmitted from the
`third control device to the second control device, and
`further wherein the third signal is automatically received
`by the second control device.
`
`Regarding Claim 31, Applicant respectfully
`submits that the prior art does not disclose or suggest
`a control apparatus, comprising: a first control device,
`wherein the first control device at least one of generates
`and transmits a first signal for at least one of
`activating, de-activating, disabling, and re-enabling, at
`least one of a premises system, a premises device, a
`premises equipment, a premises equipment system, and a
`premises appliance, of a premises, wherein the first .
`control device is located at a location remote from the
`premises, and further .wherein the first control device is
`responsive to a second signal, wherein the second signal is
`at least one of generated by and transmitted from a second
`control device, wherein the second control device is
`located at a location which is remote from the first
`control device and remote from the premises, wherein the
`second signal is transmitted from the . second control device
`
`3
`
`JCCOX-004522
`
`Petitioners - Exhibit 1005 Page 7
`
`

`

`to the first control device, and further wherein the second
`signal is automatically received by the first control
`device, wherein the first signal is transmitted from
`the first control device to a third control- device, wherein
`the third control device is located at the premises, and
`further wherein the first signal is automatically received
`by the third control device, wherein the third control
`device at least one of generates and transmits a third
`•signal for at least one of activating, de-activating,
`disabling, ajid re-enabling, the at least one of a premises
`system, a premises device, a premises equipment, a premises
`equipment system, and a premises appliance, in response to
`'
`'
`■
`the first signal.
`
`.
`
`Regarding Claim 37, Applicant respectfully
`submits that the prior art does not disclose or suggest .
`a method for providing control, comprising: transmitting a
`first signal from a first control device to a second
`control device, wherein the first control device is located
`at a location remote from a premises and remote from the
`second control device, wherein the second control device is
`located at a location remote from the premises, and further
`wherein the first signal is automatically received by the
`second control device; transmitting a second signal from
`
`4
`
`JCCOX-004523
`
`Petitioners - Exhibit 1005 Page 8
`
`

`

`the second control device to a third control device in
`response to the first signal, wherein the third control
`device is located at the premises, and wherein the second
`signal is automatically received by the third control
`device; generating a third signal with the third control
`device in response to the second signal; and at least one
`of activating, de-activating, disabling, and re-enabling,
`at least one of a premises system, a premises device, a
`premises equipment, a premises equipment system, and a
`premises appliance.
`
`’ Regarding Claim 41, Applicant respectfully
`submits that the prior art does not disclose or suggest
`a control apparatus, comprising: a first control device,
`wherein the first control device at least one of generates
`and transmits a first signal for at least one of
`activating, de-activating, disabling, and re-enabling, at
`least one of a vehicle system, a vehicle component, a
`vehicle device, a vehicle equipment, a vehicle equipment
`system, and a vehicle appliance, of a vehicle, wherein the
`first control device is located at the vehicle, wherein the
`first control device is responsive to a second signal,
`wherein the second signal is at least one of generated by
`and transmitted from a second control device, wherein the
`
`-
`
`5
`
`JCCOX-004524
`
`Petitioners - Exhibit 1005 Page 9
`
`

`

`second control device is located at a location which is
`remote from the vehicle, wherein the second signal is
`transmitted from the second control device to the first
`control device, and further wherein the second signal is
`automatically received by the first control device,
`wherein the second control device is responsive to a third
`signal, wherein the third signal is at least one of
`generated by and transmitted from a third control device,
`wherein the third control device is located at a location
`which is remote from the vehicle and remote from the second
`control device, wherein the third signal is transmitted
`from the third control device to the second control device,
`and further wherein the third signal is automatically
`received by the second control device, wherein the at least
`one. of a vehicle system, a vehicle component, a vehicle
`device, a vehicle equipment, a vehicle equipment system,
`and a vehicle appliance, is at least one of a vehicle
`ignition system, a vehicle fuel pump system, a vehicle
`alarm system, a vehicle door locking device, a vehicle hood
`locking device, a vehicle trunk locking device, a wheel
`locking device, a brake locking device, a horn, a vehicle
`light, a vehicle lighting system, a refrigerator, an air
`conditioner, an oven, a vehicle window locking device, a
`video recording device, an audio recording device, a
`
`Petitioners - Exhibit 1005 Page 10
`
`

`

`camera, an intercom device, a microphone, a locking device,
`a monitoring device for monitoring at least one of fuel
`supply, water or coolant supply, generator operation,
`alternator operation, battery charge level, and engine
`temperature, fire extinguishing equipment, radar equipment,
`hydraulic equipment, pneumatic equipment, a winch, a self­
`defense system, a weapon system, a gun, an electronic-
`warfare system, a pumping device, sonar equipment, a
`locking device for preventing unauthorized access to a
`vehicle compartment, and landing gear.
`.
`
`.
`
`Regarding Claim 50, Applicant respectfully
`submits that the prior art does not disclose or suggest
`a control apparatus, comprising:, a first control device,
`wherein the first control device at least one of generates
`and transmits a first signal for at least one of
`activating, de-activating, disabling, and re-enabling, at
`least one of a vehicle system, a vehicle component, a
`vehicle device, a vehicle equipment, a vehicle equipment
`system, and a vehicle appliance, of a vehicle, wherein the
`first control device is located at a location remote from
`the vehicle, and further wherein the first control device
`is responsive to a second signal, wherein the second signal
`is at least one of generated by and transmitted from a
`
`■
`
`7
`
`'
`
`JCCOX-004526
`
`Petitioners - Exhibit 1005 Page 11
`
`

`

`second control device, wherein the second control device is
`located at a location which is remote from the first
`control device and remote from the vehicle, wherein the
`second signal is transmitted from the second control device
`to the first control device, and further wherein the second
`signal is automatically received by the first control
`device, wherein the first signal is transmitted from the
`first control device to a third control device, wherein the
`third control device is located at the vehicle, and further
`wherein the first signal is automatically received by the
`third control device, wherein the third control device at
`least one of generates and transmits a third signal for at
`least one of activating, de-activating, disabling, and re­
`enabling, the at least one of a vehicle system, a vehicle
`component, a vehicle device, a vehicle equipment, a' vehicle
`equipment system, and a vehicle appliance, in response to .
`the first signal, wherein the at least one of a vehicle
`system, a vehicle component, a vehicle device, a vehicle
`equipment, a vehicle equipment system, and a vehicle
`appliance, is at least one of a vehicle ignition system, a
`vehicle fuel pump system, a vehicle alarm system, a vehicle
`door locking device, a vehicle hood locking device, a
`vehicle trunk locking device, a wheel locking device, a
`brake locking'device, a horn, a vehicle light, a vehicle
`
`8
`
`JCCOX-004527
`
`Petitioners - Exhibit 1005 Page 12
`
`

`

`lighting system, a refrigerator, an air conditioner, an
`oven, a vehicle window locking device, a video recording
`device, an audio recording device, a camera, an intercom
`device, a microphone, a locking device, a monitoring device
`for monitoring at least one of fuel' supply, water or
`coolant supply, generator operation, alternator operation,
`battery charge level, and engine, temperature, fire •
`extinguishing equipment, radar equipment, hydraulic
`equipment, pneumatic equipment, a winch, a self-defense
`system, a weapon system, a gun, an electronic warfare
`system, a pumping device, sonar equipment, a locking device
`for preventing unauthorized access to a vehicle
`compartment, and landing gear.
`
`Regarding Claim 51, Applicant respectfully
`submits that the prior art does not disclose or suggest
`a method for providing control, comprising: transmitting a
`first signal from a first control device to a second
`control device, wherein the first control device is located
`at a location remote from a vehicle and remote from the
`second control device, and further wherein the first signal
`is automatically received by the second control device;
`transmitting a second signal from the second control device
`to a third control device, wherein the third control device
`
`9
`
`JCCOX-004528
`
`Petitioners - Exhibit 1005 Page 13
`
`

`

`is located at the vehicle, and further wherein the second
`control device is located at a location remote from the,
`vehicle, wherein the second signal is automatically
`received by the third control device; generating a third
`signal with the third control device in response to the
`second signal; and at least one of activating, de­
`activating, disabling, and re-enabling, at least one of a
`vehicle system, a vehicle component, a vehicle device, a
`vehicle equipment, a vehicle equipment system, and a •
`vehicle appliance, in response to the third signal,
`wherein the at least one of a vehicle system, a vehicle
`component, a vehicle device, a vehicle equipment, a vehicle
`equipment system, and a vehicle appliance, is at least one
`of a vehicle ignition system, a vehicle fuel pump system, a
`vehicle alarm system, a vehicle door locking device, a
`vehicle hood-locking device, a vehicle trunk locking
`device,-a wheel locking device, a brake locking device, a
`horn, a vehicle light, a vehicle lighting system, a
`refrigerator, ah air conditioner, an oven, a vehicle window
`locking device, a video recording device, an audio
`recording device, a camera, an intercom device, a
`microphone, a locking device, a monitoring device for
`monitoring at least one of fuel supply, water or coolant
`supply, generator operation, alternator operation, battery
`
`10
`
`JCCOX-004529
`
`Petitioners - Exhibit 1005 Page 14
`
`

`

`charge level, and engine temperature, fire extinguishing
`equipment,' radar equipment, hydraulic equipment, pneumatic
`equipment, a winch, a self-defense system, a weapon system,
`a gun, an electronic warfare system, a pumping device,
`sonar equipment, a locking device for preventing
`unauthorized .access to a vehicle compartment, and landing
`gear.
`
`Regarding Claim 57, Applicant respectfully
`submits that the prior art does not disclose or suggest
`a control apparatus, comprising: a first control device,
`wherein the first control device is capable of at least one
`of activating, de-activating, disabling, and re-enabling,
`one or more of a plurality of at least one of a vehicle
`system, a vehicle component, a vehicle device, a vehicle
`equipment, a vehicle equipment system, and a vehicle
`appliance, of a vehicle, wherein the first control device
`at least one of generates and transmits a first signal for
`at least one of activating, de-activating, disabling, and
`re-enabling, the at least one of a vehicle system, a
`vehicle component, a vehicle device, a vehicle equipment, a
`vehicle equipment system, and .a vehicle appliance, wherein
`the first control device is located at the vehicle, and
`further wherein the first .control device is responsive to a
`
`11
`
`JCCOX-004530
`
`Petitioners - Exhibit 1005 Page 15
`
`

`

`second signal, wherein the second signal is at least one of
`generated by and transmitted from a second control device,
`wherein the second control device is located at a location
`which is remote from the vehicle, and wherein the second
`signal is transmitted from the second control device to the
`first control device, and further wherein the second signal
`is automatically received by the first control device,
`wherein the second control device is responsive to a third
`signal, wherein the third signal is at least one of
`generated by and transmitted from a third control device,
`wherein the third control device is located at a location
`which is remote from the vehicle and remote from the second
`control device, wherein the third signal is transmitted
`from the third control device to the second control device,
`and further wherein the third signal is automatically
`received by the second control device.
`
`Regarding Claim 58, Applicant respectfully
`submits that the prior art does not disclose or suggest
`a control apparatus, comprising: a first control device,
`wherein the first control device at least one of generates
`and transmits a first signal for at least one of
`activating, de-activating,, disabling, and re-enabling, at
`least one of a vehicle system, a vehicle component, a
`
`12
`
`JCCOX-004531
`
`Petitioners - Exhibit 1005 Page 16
`
`

`

`vehicle device, a vehicle equipment, a vehicle equipment
`system, and a vehicle appliance, of a vehicle, wherein the
`first control device is located at a location remote from
`the vehicle, and further wherein the first control device
`is responsive to a second signal, wherein the second signal
`is at least one of generated by and transmitted from a
`second control device, wherein the second control device is
`located at a location which is remote from the first
`control device and remote from the vehicle, wherein the
`second signal is transmitted from the second control device
`to the first control device, and further wherein the second
`signal is automatically received by the first control
`device, wherein the first signal is transmitted from the
`first control device to a third control device, wherein the
`third control device is capable of at least one of
`activating, de-activating, disabling, and re-enabling, one
`or more of'a plurality of the at least one of a vehicle
`system, a vehicle component, a vehicle device, a vehicle
`equipment, a vehicle equipment system, and a vehicle
`appliance, and wherein the third control device is located
`at the vehicle, and further wherein' the first signal is
`automatically received by the third control device, wherein
`the third control device at least one of generates and
`transmits a third signal for at least one of activating,
`
`.
`
`■
`
`13
`
`■
`
`JCCOX-004532
`
`Petitioners - Exhibit 1005 Page 17
`
`

`

`de-activating, disabling, and re-enabiing, the at least one
`of a vehicle system, a vehicle component, a vehicle device,
`a vehicle equipment, a vehicle equipment system, and a
`vehicle appliance.
`
`Regarding Claim 59, Applicant respectfully
`submits that the prior art does not disclose or suggest
`a control apparatus, comprising: a first control device,
`wherein the first control device is capable of at least one
`of activating, de-activating, disabling, and re-enabling,
`one or more of a plurality of at least one of a premises
`system, a premises device, a premises equipment, a premises
`equipment system, and a premises appliance, of- a premises,
`wherein the first control device at least one of generates
`and transmits a first signal for at least one of
`activating, de-activating, disabling, and re-enabling, the
`at least one of a premises system, a premises device, a
`premises equipment, a premises equipment system, and a
`premises appliance, wherein the first control device is
`located at the premises, wherein the first control device
`is responsive to a second.signal, wherein the second signal
`is at least one of generated by and transmitted from a
`second control device, wherein the second control device is
`located at a location which is remote from the premises,
`
`,
`
`14
`
`JCCOX-004533
`
`Petitioners - Exhibit 1005 Page 18
`
`

`

`wherein the second signal is transmitted from the second
`control device to the first control device, and further
`wherein the second signal is automatically received by the
`first control device, wherein the second control device is
`responsive to a third signal, wherein the third signal is
`at least one of generated by and transmitted from a third
`control device, wherein the third control device is located
`at a location which is remote from the premises and remote
`from the second control device, wherein the third signal is
`transmitted from the third control device to the second
`control device, and further wherein the third signal is
`automatically received by the second control device.
`
`Regarding Claim 60, Applicant respectfully
`submits that the prior art does not disclose or suggest
`a control apparatus, comprising: a first control device,
`wherein the first control device at least one of generates
`and transmits a first signal for at least one of
`activating, de-activating, disabling, and re-enabling, at
`least one of a premises system, a' premises device, a .
`premises equipment, a premises equipment system, and a
`premises appliance, of a premises, wherein the first .
`control, device is located at a location remote from the
`premises, and further wherein the first control device is
`
`15
`
`JCCOX-004534
`
`Petitioners - Exhibit 1005 Page 19
`
`

`

`responsive to a second signal, wherein the second signal is
`at least one of generated by and transmitted from a second
`control device, wherein the second control device is ■
`located at a location which is remote from the first
`control device and remote from the premises, wherein the
`second signal is transmitted from the second control device
`to the first control device, and further wherein the second
`signal is automatically received by the first control
`device, wherein the first signal is transmitted from
`the first control device to a third control device, wherein
`the third control device is capable of at’ least one of
`activating, de-activating, disabling, and re-enabling, one'
`or more of a plurality of the at least one of a premises
`system, a-premises device, a premises equipment, a premises
`equipment system, and a premises appliance, and wherein the
`third control device is located at the premises, and
`further wherein the first signal is automatically received
`by the third control device, wherein the third control
`device, at least one of generates and transmits a third
`signal for at least one of activating, de-activating,
`disabling, and re-enabling, the at least one of a premises
`system, a premises device, a premises equipment, a premises
`equipment system, and a premises appliance, in response to
`the first signal, .
`/
`
`16
`
`JCCOX-004535
`
`Petitioners - Exhibit 1005 Page 20
`
`

`

`Regarding Claim 61, Applicant respectfully .
`submits that the prior art does not disclose or suggest
`a method for providing control, comprising: transmitting a
`first signal from a first control device to a. second
`control device, wherein the first control device is located
`at a location remote from a vehicle and remote from the
`second control device, and further wherein the first.signal
`is automatically received by.the second control device;
`transmitting a second signal from the second, control device
`to a third control device, wherein, the third control device
`is located at the vehicle, and further wherein the second
`control device is located at a location remote from the
`vehicle, wherein the second signal is automatically
`received by the third control device, and further wherein
`the third control device is capable of at least one of
`activating, de-activating, disabling, and re-enabling, one'
`or more of a plurality of at least one of a vehicle system,
`a vehicle component, a vehicle device, a vehicle equipment,
`a vehicle equipment system, and a vehicle appliance; .
`generating a third signal with the third control device in
`response to the second signal; and at least one of
`activating, de-activating, disabling, and re-enabling, the
`
`17
`
`JCCOX-004536
`
`Petitioners - Exhibit 1005 Page 21
`
`

`

`at least one of a vehicle system, a vehicle component, a
`vehicle device, a vehicle equipment, a vehicle equipment
`system, and a vehicle appliance.
`
`Regarding Claim 62, Applicant respectfully
`submits that the prior art does not disclose or suggest
`a method for providing control, comprising: transmitting a
`first signal from a first control device to a second
`control device, wherein the first control device is located
`at a location remote from a premises and remote from the
`second control device, and further wherein the first signal
`is automatically received by the second control device;
`transmitting a second signal from the second control device
`to a third control device, wherein the third control device
`is located at the premises, and further wherein the second'
`control device is located at a location remote from the
`premises, wherein the second signal is automatically
`received by the third control device, and further wherein,
`the third control device is capable of at least one of
`activating, de-activating, disabling, and re-enabling, one
`or more of a plurality of