`
`GOLD STANDARD EXHIBIT 2025
`US ENDODONTICS v. GOLD STANDARD
`CASE IPR2015-01476
`
`
`
`HIGH PERFORMANCE THIN·FILM COATINGS FOR CUTTING TOOLS & WEAR PARTS
`
`
`
`HIGH PERFORMANCE
`
`THIN-FILM COATINGS
`
`FOR CUTTING TOOLS & WEAR PARTS
`The importance of advanced coatings in ·
`achieving dramatic gains in cutting tool
`and wear part performance cannot be
`overstated. Properly applied, coatings
`improve many tool and part characteristics.
`They increase surface hardness, lower the
`friction coefficient and thermal conductivity,
`and provide a chemically inert surface.
`Performance benefits include: significantly
`increased tool and part life, reduced friction
`and heat buildup, and high resistance to
`edge buildup, galling and fissure
`propagation. Applying the right coating can increase tool and
`part productivity from 100% to over 1000%!
`
`TECHNOLOGICAL LEADER. As a cutting tool manufacturer,
`GUHRING offers a level of technical expertise without equal
`in the industry. GUHRING was the first to introduce TiN
`coating (Titanium Nitride) to cutting tools in 1980 and has
`remained a global leader in developing and applying new
`coating technology to improve both cutting tool and wear
`part performance. Today, GUHRING offers a full range of
`high performance thin-film coatings to meet customers'
`diverse needs, including:
`• TiN (Titanium Nitride),
`• TiAIN (Titanium Aluminum Nitride),
`• TiCN (Titanium Carbonitride),
`• FIREX® (special TiN-TiAIN multilayer hard coating),
`• AlliN (Aluminum Titanium Nitride),
`• MolyGiide® (Molybdenum Disulfide-based soft coating),
`and other advanced hard, soft and combined coatings.
`
`Each application presents different performance challenges,
`and GUHRING's advanced coating selection provides
`application-specific solutions,
`delivering higher hardness,
`increased heat and shock
`resistance, and greater lubricity as
`required. By effectively matching
`the right high performance coating
`to each application, GUHRING
`Coating Services maximizes tool
`and wear part productivity and
`cost effectiveness- providing
`absolute value for money.
`
`./ LONGER TOOL & WEAR PART LIFE
`./ FASTER OPERATING SPEEDS & FEEDS
`./ SIGNIFICANTLY INCREASED PRODUCTIVITY
`
`STATE-OF-THE-ART EQUIPMENT. Coatings are only as
`good as the process used to apply them. Advanced
`equipment, special training and experience are vital.
`GUHRING utilizes both state-of-the-art cathodic arc and
`reactive ion coating systems to deliver superior coating
`adhesion, uniform thickness and structure, and batch-to(cid:173)
`batch reproducibility.
`
`Advanced climate control
`systems maintain optimum
`facility air temperature,
`humidity and pressure,
`while removing dust and
`other airborne impurities.
`A custom-designed, fully
`automated ultrasonic
`cleaning system maximizes tool and part pre-coating
`cleanliness, while precision stereo dynascopes enhance
`both pre- and post-coating visual inspection. Coating
`adhesion and thickness are closely monitored utilizing
`calotest and other advanced measuring equipment.
`
`UNIQUE APPROACH. What takes place in the coating
`chamber is widely considered the most critical step in the
`coating process. However, if tools and parts are not properly
`prepared, coating quality can be severely compromised. At
`GUHRING, we take the time to prepare each job properly.
`First, we clean each tool and part thoroughly in our special
`five-stage ultrasonic cleaning system. Second, we sort
`each job by tool and part size, geometry, and material type
`to promote optimum coating uniformity and thickness.
`Properly cleaned and sorted, the tools and parts are then
`placed in the coating chamber. We monitor the coating
`process closely to ensure that neither the structural
`integrity nor geometry of the tools
`and parts is altered.
`
`In sum, GUHRING's approach to
`coating combines high technology
`with personal attention to detail
`'
`resulting in a level of coating
`quality and service few can match.
`
`
`
`TiN • S-coat
`Titanium Nitride
`The gold S-coat is an excellent. all-around , cost-effective high performance coating which increases tool and part surface hardness to over
`80 Rc, greater than tungsten carbide. As such , S-coated tools and parts last up to five times longer than uncoated tools and parts, and can
`be run at more aggressive speeds and feeds. Amoog TiN coating providers, no competitor has been able to match the performance profile of
`Guhring's S-coat.
`
`TiAI N • A-coat
`Titanium Aluminum Nitride
`The black-violet A-coat is recommended when extra hard ness and heat resistance are required , as when machining abrasive materials such as
`cast iron and high silicon-content aluminum alloys. During cutting, an oxide (AI203) layer forms over the A-coat, providing extremely high heat
`resistance. A-coat also performs equally well in high thermal stress conditions, such as high speed turning, near-d ry and dry machining, and
`deep and small diameter holemaking where cutting fluids have difficulty penetrating.
`
`AI TiN
`Aluminum Titanium Nitride
`Now, for application in materials 40 Rc and higher, there's a new Guhring coating- AITiN! This dark gray coating is unique in its ability to
`provide the high heat resistance, high hardness and high friction coefficient needed to dramatically improve cutting tool performan ce in
`hardened materials. AITiN is ideal for high speed, high velocity drilling, milling and turning of hard and/or abrasive materials, plus dry
`machining applications.
`
`KEY
`
`CHARACTERISTICS
`TiN
`Titanium Nitride
`
`OF GUHRING HIGH
`TiCN
`TiAIN
`Titanium Carbonitride
`Titanium Aluminum Nitride
`
`PERFORMANCE COATINGS
`FIREX®
`MolyGiide®
`AlliN
`Aluminum Titanium Nitride
`MoS
`
`Type
`
`Hard • Wear-resistant
`
`Hard • Wear-resistant
`
`Hard • Wear-resistant
`
`Hard • Wear-resistant
`
`Hard • Wear-resistant
`
`Soft • Lubricating
`
`Identifying Color
`
`Gold
`
`Gray Violet
`
`Black Violet
`
`Red Violet
`
`Dark Gray
`
`Silver
`
`Coating Process
`
`Coating Temperature
`
`Layer Structure
`
`Thickness (pm)
`
`Nanohardness (Gpa)
`
`friction Coefficient (Fetting)
`
`Thermal Stability
`
`Application Data
`
`PVD
`Physical Vapor Deposition
`930 'F
`500 'C
`
`PVD
`PVD
`Physical Vapor Deposition Physical Vapor Deposition
`930 ' F
`930 ' F
`500 ' C
`500 ' C
`
`PVD
`PVD
`PVD
`Physical Vapor Deposition Physical Vapor Deposition Physical Vapor Deposition
`930 'F
`930 ' F
`305 'F
`500 'C
`500 'C
`150 'C
`
`Monolayer
`
`1.5·5.0
`
`24
`
`0.50
`
`1100 'F
`595 ' C
`
`Gradient
`
`1.5·5.0
`
`30
`
`0.25
`
`840 ' F
`450 ' C
`
`Monolayer
`
`1.5·5.0
`
`33
`
`0.50
`
`1470 ' F
`800 'C
`
`Multilayer
`
`1.5-5.0
`
`30-33
`
`0.50
`
`1470 'F
`800 'C
`
`Monolayer
`
`1.5-5.0
`
`38
`
`0.60
`
`1650 ' F
`900 'C
`
`Monolayer
`
`1.0
`
`n.a.
`
`0.10
`
`1470 'F
`800 'C
`
`Broad application
`Cutting, forming &
`injection molding
`
`High toughness &
`shock resistance lor
`punching , stamping
`milling, hobbing
`& tapping
`
`High hardness &
`heat resistance lor
`drilling, turning &
`dry high speed machining
`
`Broad application
`Increased Al·content delivers Significantly increases
`High toughness, hardness very high heat restance lor
`tool/wear part lubricity,
`& heat resistance
`hard machining (>40 HRC), withstands high temperatures,
`high speed machining, & & can be applied over
`dry high speed machining
`hard coatings
`
`All above coatings are applied at Guhring's Brookfield, Wisconsin or New Hudson, Michigan manufacturing facilities.
`
`
`
`GUHRING HIGH PERFORMANCE COATINGS SELECTION GUIDE
`The table below provides general recommendations for optimum tool and part performance with GUHRING high performance
`TiN, TiCN, TiAIN, FIREX®, A/TiN and MolyGiide® coatings. GUHRING COATING SERVICES coats many types of tools and wear
`parts, including driffs, reamers, taps, countersinks, turning inserts, end miffs, miffing cutters, hobs, miffing inserts, punches,
`dies, forming tools, gears, pistons, die casting molds and components, and plastic injection molds and components. Coatings
`can be applied to high speed steel, stainless steel, tool steel, carbide and many other materials.
`
`TiN
`Titanium
`Nitride
`
`TiCN
`Titanium
`Carbonitride
`
`TiAIN
`Titanium Alu minum
`Nitride
`
`FIREX®
`Alternating ultra-thin
`TiN-TiAIN layers
`
`Titanium Nitride
`
`Integrated lubricant
`soft coating
`MolyGiide®
`Molybdenum
`Disulfide-based
`
`CUTTING TOOLS - Continuous Chip
`Drills • Reamers • Taps • Countersinks • Turning Inserts
`
`.I
`
`.I
`
`.I
`
`.I
`
`.I
`
`CUTTING TOOLS - Interrupted Cut
`End Mills • Milling Cutters • Hobs • Milling -Inserts
`
`PUNCHES, DIES & FORMING TOOLS
`
`WEAR PARTS
`
`DIE CASTING MOLDS & COMPONENTS
`PLASTIC INJECTION MOLDS & COMPONENTS
`
`No one offers more
`
`®
`
`For technical assistance and pricing information, contact:
`GUHRING COATING SERVICES P.O. Box 643, Brookfield, WI 53008-0643
`Tel {262) 784-6730 (800) 776-6170
`Fax (262) 784-9291
`Shipping Address 1445 Commerce Aven ue, Brookfield, WI 53045
`
`ISO 9001:2000 CERTIFIED MANUFACTURER
`
`© Guhring, Inc. 2003
`
`FORM 01-9901 (11 /03)