SERVICE MANUAL
`
`HEADPHONES jacks (stereo minijacks)
`
`REW 11+ (rewind) button
`
`~ FF (fast forward) button
`
`~ PLAY button
`
`• STOP button
`
`WM-DDill
`
`Refer t MDR-15L Service Manual issued previously
`for informati n of headphones supplied with this set.
`AEP Model
`
`VOLUME control
`
`BATTERY indicator
`
`DOLBY NR switch
`
`TAPE selector
`
`Dolby noise reduction manufactured under license from
`Dolby Laboratories Licensing Corporation.
`"DOLBY" and the double-D symbol DO are trademarks of
`Dolby Laboratories Licensing Corporation.
`
`PHOTO: BLACK TYPE
`
`SPECIFICATIONS
`
`Similar Mechanism Set
`
`Tape track
`4-track 2-channel stereo
`Fast winding time
`Approx. 2 min. with Sony Cassette C-60
`Frequency response
`40-15,000 Hz
`Wow and flutter
`±0.13% (DIN)
`0.08% WRMS (NAB)
`Power output
`Headphones:
`20 mW + 20 mW (at 10% harmonic distortion)
`load impedance 32 ohms
`at DC operation
`Outputs
`Two HEADPHONES jacks (stereo minijacks)
`load impedance 8-300 ohms
`Power requirements
`3 V DC, two R6 (size AA) batteries
`DC IN 3 V jack accepts:
`EBP-500 battery case (optional) for use on
`two R20 (size D) batteries
`AC-D2M AC power adaptor (optional) for use
`on 220 V AC, 50 Hz
`DCC-70 or DCC-127A car battery cord (optional) for use with 12 V
`car battery
`(For connection with the DCC-127A, the optional PC-200 DC plug
`adaptor is required.)
`Battery life
`
`Batteries
`
`Continuous playback hours
`
`Sony batteries SUM-3 (NS)
`
`Sony alkaline batteries AM3
`
`Approx. 4
`
`Approx. 9
`
`For maximum performance we recommend the use of alkaline
`batteries.
`
`WM-00
`
`00-100
`
`Tape Transport Mechanism Type
`
`Dimensions
`Approx. 79.7x110x32.8mm (w/h/d)
`(3 1/ 4 x43fax 15/ 16 inches)
`incl. projecting parts and controls
`Weight
`Approx. 290 g (10.3 oz) incl. batteries,
`not incl. other accessories
`
`Note: If a car battery cord or an AC power adaptor not manufactured by Sony
`is used, a fuse must be installed in the battery cord or the AC power
`adaptor and the polarity of the plug must be as illustrated.
`
`FEATURES
`
`• Disc Drive system assures accurate and stable tape trans(cid:173)
`port, greatly reducing wow and flutter.
`• Dolby NR system reduces tape hiss noise.
`• Tape selector for optimum playback with standard tapes
`as well as high-performance tapes.
`• Two HEADPHONES jacks allow two persons to listen to
`tape playback together.
`
`STEREO CASSETTE PLAYER
`SONY.
`
`Apple Inc., et al.
`Exhibit 1009
`Apple Inc., et al. v. Global Touch Solutions, Inc.
`IPR2015-01175
`
`Exhibit 1009, Page 001
`
`

`
`WM-DDm
`
`Replacing chip components
`All chip components should be connected and disconnect(cid:173)
`ed, using a tapered soldering iron [temperature of the iron
`tip: less than 280°C (536°F)], a pair of tweezers and braid(cid:173)
`ed wire.
`
`Precautions for replacement
`1. Do not disconnect the chip component forcefully.
`Otherwise, the pattern may peel off.
`2. Never re-use a disconnected chip component. Dispose of
`all old chip components.
`3. To protect the chip component, heating time for attach(cid:173)
`ing the component should be within 3 seconds.
`
`o Removing chip components
`(l) Removing solder at electrode
`Remove the solder at the electrode, using a thin
`braided wire. Do not remove the solder of the part
`(chip component) attached adjacent to the electrode.
`
`(3) Smoothing the soldered surface
`After disconnecting the chip component, remove the
`solder by using a braided wire to sinooth the land
`surface.
`
`o Connecting chip components
`The value of chip components is not displayed on the
`main body. Take due precautions to avoid mixing new
`chip components with other ones.
`
`( 1) Applying s<>lder to land on one side
`Apply a thin layer of solder to the land on one side
`where the chip component is to be connected. Too
`much solder may cause bridging.
`
`(2) Speedy soldering
`Hold the chip component at the desired position,
`using tweezers, and apply the soldering iron in the
`arrow-marked direction. To protect the chip compo(cid:173)
`nent, heating time should be within 3 seconds.
`
`Braided wire
`
`(2) Disconnecting chip components
`Turn the tweezers with the soldering iron alternately
`applied to both electrodes, and the chip component
`will be disconnected. Take careful precautions while
`disconnecting, because if the chip component is force(cid:173)
`fully removed the land may peel off.
`Never re-use a disconnected chip component.
`
`~~~,~-------------
`\ ~ I
`\
`
`Land
`
`Printed circuit board
`
`(3) Speedy soldering of electrode on the other side
`Solder the electrode on the other side in the same
`way as in (2) above.
`
`-2-
`
`Exhibit 1009, Page 002
`
`

`
`SECTION 1
`MECHANICAL OPELATION
`MECHANICAL OPERATION in this set is the same
`as that of model WM-DD, so refer to WM-DD service
`manual previously issued for MECHANICAL OPERA(cid:173)
`TION.
`SECTION 2
`DISASSEMBLY
`
`Note: Follow the disassembly procedure in the numerical order given.
`
`Cassette Panel
`
`8 Remove cassette panel.
`
`0 panel screw
`
`I
`
`Control Panel
`
`0 precision screw
`P 1.4x 2.5, TYPE 1
`
`Note: Control panel can be removed with
`cassette panel installed.
`
`8 panel screw
`
`8 Push FF, REW buttons.
`
`8 precision screw
`P 1.4x 2.5, TYPE 1
`
`Note for reassembling:
`
`(A)
`
`(B)
`
`Chassis
`
`WM-DDm
`
`WM-DDm
`
`Main B ard 8 precision screw
`
`M1.4x3, TYPE3
`
`Motor
`
`precision screw
`P 1.4x 1.8, TYPE 3
`
`Lift up main board in the
`direction of arrow taking care
`not to break lead wires.
`
`motor
`
`Chassis
`0 precision screw
`P 1.4x 5, TYPE 3
`
`chassis
`
`8 chassis panel
`
`, . Remove mechBIIism deck.
`
`Lift the take up reel side of
`the mechanism block in the beginning.
`
`control panel
`
`(Installing the compression spring)
`
`A) Insert the portion (A) of DOLBY BUTTON and TAPE
`BUTTON into the slit as shown.
`B) Set the control panel up. Set DOLBY SWITCH and TAPE
`SWITCH on the main board at OFF position and METAL.
`Then put the mechanical unit into the control panel
`following the numbers(]) and @ .
`
`Cassette holder
`
`Turn cassette holder a half turn in the
`direction of arrow and remove it taking
`care the projecting parts.
`
`8 precision screw
`P 1.4x 2.5, TYPE 1
`~/
`
`~,,_
`""'
`Be careful not to~XJ)~'--7:r.!'"v"-."1-
`/
`lose these parts.
`.
`.
`pro1ectmg
`/
`parts
`precision screw
`p t.4x 2,5, TYPE 1
`cassette holder
`
`-3-
`
`-4-
`
`Pinch roller and head
`can be replaced.
`
`Exhibit 1009, Page 003
`
`

`
`PRECAUTION
`
`SECTION 3
`ADJUSTMENTS
`
`WM-DDm
`
`1. Clean the following parts with a denatured(cid:173)
`alcohol-moistened swab:
`
`playback head
`capstan
`
`pinch roller
`
`2. Demagnetize the playback head with a head
`demagnetizer.
`
`3. Do not use a magnetized screwdriver for the
`adjustments.
`
`4. After the adjustments, apply suitable locking
`compound to the parts adjusted.
`
`5. The adjustments should be performed with the
`rated power supply voltage unless otherwise
`noted.
`
`3-1. MECHANICAL ADJUSTMENT
`
`Torque Measurement
`
`Perform with 2.5 V DC power.
`
`Torque
`meter
`
`Meter reading
`
`FWD
`
`CQ-102C
`
`FF, REW
`
`CQ-201B
`
`Back
`Tension
`
`Tape Pull-
`ing Force
`
`CQ-102C
`
`CQ-403
`
`22-46 g•cm
`(0.3- 0.63 oz•inch)
`
`More than 65 g·cm
`(More than 9.04 oz•inch)
`1- 3.5 g•cm
`(0.01- 0.05 oz•inch)
`More than 80 g•cm
`(More than 11.12oz•inch)
`
`Head Height Adjustment
`
`1. Prepare an adjustment cassette as shown below.
`
`C-120
`tape cassette
`
`Cut out hatched
`portions.
`
`2.
`
`In playback mode and viewing from the front,
`adjust the head heights to eliminate tape curl
`and tape twist at portions shown by the arrow.
`
`playback head
`
`~-A
`
`~T~ ~ ~~
`
`3-578-138-01 (t = 0.1)
`3-578-138-11 (t = 0.2)
`Shim, head height adjustment
`
`3.
`
`If necessary, adjust the height of the tape-guide
`by turning the adjustment screw.
`
`adjustment screw
`
`Pinch Roller Pressure Adjustment
`
`- Playback Mode -
`
`4. Apply locking compound on adjustment screw.
`
`1 . Pull the spring scale in the direction shown by
`the arrow.
`
`2. Slowly return the pinch roller and read the
`spring scale just when the pinch roller starts
`
`rotating. p
`
`,
`'f'
`S
`pect tcahon:
`170 ± 20 g (5.3 "'6.7 oz)
`
`I
`•
`'~:. -:._"~ __ -~
`
`1
`
`-5-
`
`Exhibit 1009, Page 004
`
`

`
`WM-DDm
`
`1. Motor section installation
`
`Tighten loosely.
`8 Tighten firmly.
`
`2. Wow & flutter and motor position
`
`1. Adjust with the adjustment screw so that rotor
`thrust play is within O.lmm. (When confirming
`play, press motor down so that the motor
`pulley and rotor rubber section do not touch.)
`
`2. Wow & flutter adjustment
`
`Setting:
`Power supply voltage: 2.5V
`Tape: Adjust by using end portion of tape.
`VOLUME control: mechanical mid
`TAPE SELECT switch: NORM
`DOLBY NR switch: OFF
`
`Procedure:
`CD Mode:
`
`playback
`
`wow & flutter
`meter
`
`HEADPHONES
`
`Turn the adjustment screw so that the wow
`and flutter meter reads minimum (less than
`0.12% W·RMS).
`
`~ At 2V power supply voltage, confirm normal
`FWD operation.
`® When CD and (2) are not satisfied, repeat adju1)t(cid:173)
`ment again starting with "Motor Section
`Installation".
`
`0 Tighten screw loosely.
`8 Tighten screw while pressing
`the motor section lightly
`in the direction of the arrow.
`0 Tighten the screw.
`
`Press down
`
`Motor
`
`adjustment screw
`(wow & flutter)
`
`-6-
`
`Exhibit 1009, Page 005
`
`

`
`2-2. ELECTRICAL ADJUSTMENTS
`
`Tape Speed Adjustment
`
`Playback Head Azimuth Adjustment
`
`WM-DDm WM-DDm
`
`Setting:
`
`mechanical mid
`VOLUME control:
`TAPE SELECT switch: NORM
`DOLBY NR switch: OFF
`Procedure:
`
`Mode: playback
`
`test tape
`WS-48A
`(3kHz, OdB)
`
`digital frequency
`counter
`
`set ·k~ ~
`
`HEADPHONES
`
`1. Open the solder bridge shown below.
`
`2. Turn RV601 so that frequency reading be(cid:173)
`comes in 3090Hz± 10Hz. (at the ending part
`of the test tape)
`
`3. Resolder the adjustment patterns opened in
`step 2 above. Now frequency reading should be(cid:173)
`comes in 3000 Hz ± 9 Hz.
`
`Specification:
`
`Digital frequency counter
`
`3000Hz± 9Hz
`
`Adjustment Location:
`
`-main board-
`
`Adjustment
`patterns
`
`Setting:
`mechanical mid
`VOLUME control:
`TAPE SELECT switch: NORM
`DOLBY NR switch: OFF
`
`Procedure:
`
`1. Mode: playback
`
`32n.
`
`HEADPHONES
`
`VTVM El
`
`2. Turn the adjustment screw for the maximum
`output levels. If these levels do not match, turn
`the adjustment screw until both of output
`levels match together within 1 dB.
`
`L·CH
`
`~; ~~:;
`@hk
`
`Screw
`position
`
`peak
`
`.-_.----'-within
`--::~~-+---:~_...-~or- 1 dB
`
`-angle
`
`L·CH
`peak
`
`R·CH
`peak
`
`3. Phase Check
`Mode: playback
`
`test tape
`P-4-A063
`(6.3kHz, -10d8)
`
`L-CH
`
`320
`
`RV601
`
`HEADPHONES
`
`Screen pattern
`
`0@@(§)Q
`
`90°
`lin phase 45'
`1
`~------v----J
`good
`
`t 135'
`
`18CfJ
`
`wrong
`
`Adjustment Location:
`
`adjustment screw
`
`-7-
`
`-8-
`
`Playback Level Adjustment
`
`Setting:
`mechanical mid
`VOLUME control:
`TAPE SELECT switch: NORM
`DOLBY NR switch: OFF
`
`Procedure:
`Mode: playback
`test tape
`P-4-L300
`(315Hz, OdB)
`
`VTVM
`
`DOLBY out
`Refer to the following figure)
`for DOLBY out point.
`
`(
`
`Specification:
`
`1)
`
`2)
`
`DOLBY out level: 0.073 V ( -20.5 ± 0.2 dB)
`If necessary, adjust RV 1 0 1 ( L-CH) and R V20 1
`(R-CH) for the specification.
`
`Confirm that the output level of DOLBY out
`is not changed when. repeating playback and
`stop .
`
`Adjustment Location:
`- main board -
`
`IR26
`UI!
`
`RV101
`(L-CH)
`
`;.__,_..-..._ RV201
`(R-CH)
`
`R-CH DOLBY out
`
`Exhibit 1009, Page 006
`
`

`
`SECTION 4
`DIAGRAMS
`
`Semiconductor Lead Layouts
`
`MSM58141RS
`
`8 7 6 5
`
`0
`
`I 2 3 4
`(Top view)
`
`2SA812
`2SC1623
`2SB624-BV4
`
`BA3304F
`NJM2063AM
`TA7688F
`CX20084
`
`"~·
`
`1
`
`8
`
`2SD596 Q 2SB798
`
`E
`
`8
`
`c
`
`~ E
`
`B
`
`FMW1
`
`2 1
`
`3~
`~:[1
`
`3
`
`2
`
`182837
`
`ca!hode
`
`"A
`
`I~ anode
`
`anode
`
`SR506D
`
`RD7.5M-B1
`
`f
`
`onodo
`
`clldlodo ~
`ri •c
`
`1
`
`1
`
`]
`
`I
`
`Semiconductor Location
`
`Ref. N
`
`Descripti n
`
`R f. No. Description
`
`0301
`0302
`0303
`0701
`
`IC301
`IC302
`IC303
`IC601
`IC602
`
`0-18
`J-15
`0-10
`P-5
`
`M-17
`0-14
`L-12
`0-7
`N-6
`
`0302
`0303
`0304
`0305
`0601
`0602
`0701
`0702
`0703
`
`K-13
`0-10
`P-10
`N-11
`R-6
`N-9
`P-5
`U-5
`0-5
`
`N te:
`o-- : parts extracted from the component side.
`• e - : parts extracted from the conductor side.
`•
`•
`: part mounted on the conductor side.
`® : Through hole.
`tt:::::::;:;::::: component-side pattern.
`
`-9-
`
`-10-
`
`Exhibit 1009, Page 007
`
`

`
`1
`
`3
`
`4
`
`2
`3-2. SCHEMATIC DIAGRAM
`r------ - ------ - ------ - ------ - ------ - ------ - ------ - ------ - ------ - ------ - ~ - ------ - ------ - ------ - ------ - ------ - ------ - ------ - ------ - ------ - ------ -
`[ MAIN BOARD 1
`
`5
`
`6
`
`7
`
`9
`
`10
`
`11
`
`12
`
`13
`
`14
`
`WM-DDm WM-DDm
`
`15
`
`,j,.
`
`CHASSIS)
`EARTH
`
`(
`
`RVIOI
`2. 2k IOBl
`
`.n
`
`C102
`10
`4V
`+
`
`R313
`10
`
`C302
`220
`4V
`
`R110
`5. 6k
`
`C119
`3. 3
`25~
`
`C320
`lOOP
`
`C319
`lOOp
`
`C306
`0.01
`
`Cl04
`3. 3
`4V
`
`R106
`47k
`
`2. ~
`16
`
`~1. 4
`15
`
`2~8~
`C108
`:l;l108
`~01--33-+--4-------.3. 3k
`C106
`0.68
`C109
`20V
`0. 0068
`f---4~-----<~H+....__.
`C105
`o. 047
`
`1'1.45
`12
`
`II
`
`1.25 ~1.06 1.4
`10
`9
`
`o~68h
`RI09
`47k~
`
`C305
`to+
`6. 3V r
`
`R,V301-1
`IOK (Cl
`
`Rill
`I. 5k
`
`C111
`1
`
`IHEADPHONESI
`,.--------E-.t./1.'\ .,'uv'~ J301-1
`~
`
`T
`
`T
`C307
`3.3 C113 .1J;l113
`4 v + o. 22
`1. 5k
`
`R114
`330
`
`C311
`o. 001
`lt--41------ldis
`~ cNo4
`R112.r.-..++f--_.--+----+----+-+-t-----lcl ls
`
`4V
`
`0.001
`
`,j,.
`
`CHASSIS)
`EARTH
`
`(
`
`1.4
`
`~3
`13
`
`t2. 3
`12
`
`3. 9
`~2. 3
`II
`
`10
`
`1.4
`
`o. 001
`
`4_
`
`16 1"',.'--1.._
`
`._---Jif----, jPB LEVELj
`C103 ~
`RI03 0. 0039
`••
`n8~
`•• •• 15.,_6_ao_k.._-w.-__.
`R104
`1.4
`33k
`
`PB HEAD
`HP901-1
`
`1. _i I '•
`'•,"-
`
`12.
`
`3
`
`"
`
`A
`
`8
`
`t----+-1•. _4 '"'~'
`T
`C301
`
`2r ~86~.L
`
`_
`
`I C301
`BA3304F
`(PRE AMPl
`
`'
`
`5
`
`6
`
`~
`R105
`39k-I1
`~ ITAPEI
`8301-1
`
`13
`
`INORMI--
`8301-2
`
`12
`
`11 D
`
`METAL
`C r 02
`
`PB HEAD
`
`7
`
`R204
`33k
`
`R202 •
`
`150k
`
`c
`
`D
`
`Cf.
`4V
`
`10~. 4
`Rl~k5
`C20~201
`R203
`HP901-2
`• _, •• ••••
`680k
`""
`o. 00 47k
`~-
`:_.'!"= l+~f=o~-.tr-=""*'=*--....__==f=l .=·_it( 8 •• ••
`>..:---..---11---::-'
`9 ·~1. 35 C203 ~ 8302
`o. 0039 ~ c202
`.n 1e
`' - - - - - '
`IDOLBY NRI
`'------R-IV2~0-I ...__+...t,.f--J IQITJ- [illj]
`2. 2k IOBl
`
`0 34'
`
`JL
`
`1.~
`13
`
`I C302 NJM2063 AM
`
`;
`
`VR301
`IVOLUMEI
`
`15
`16
`\, ~-,. m • ~ .,.,,.,.~ ~ ~ ~., ~- _ . . , ._ ~.,"' . . . ., ~"',. .. ,. , . , . .. ,. ,. ., ,. . , . , "',. , . , . , . . , .. ,.,.,.,.1
`
`IC303 TA7688F
`
`IDOLBY AMPl
`~ .............................. ;
`6
`7
`'
`I. 45 ~I. 25 ~I. 06
`I. 4• C205
`~
`o. 047
`4---i 1--+--i p+~ C207 R20k9
`47
`B~~~
`C209
`0. 0047
`0. 0068
`V
`20
`
`5
`
`8
`
`R206
`47k
`
`R211
`1. 5k
`
`C211
`I
`
`RV301-2
`!OK !Cl
`
`I. 3~ ~1. 36
`
`CHEAD PHONE AMPl
`~ ....................................................................................................... :
`2
`6
`7
`5
`I
`~1. 4
`"2. 3
`~0
`R212
`3. 9
`
`R303
`22k
`
`I. 4
`
`+ C308
`22
`4V
`
`R301
`lk
`
`C208
`o. 033
`
`R208
`R207
`3. 3k
`430k
`.-----+---+--+----_._-+-----'C210
`3. 3
`R210
`5. 6k
`25V
`
`C303 + C304
`0.1
`
`, g
`
`C321
`lOOp
`
`R115
`R215
`D302
`1S2r-83_7__,..--~471r-k--r-lf?~ ~ 47k
`~o o'~~
`
`R302
`lOOk
`
`Q302
`FMWI
`
`MUTING
`
`.__ ___ ....... -e-___.:AV~ J301-2
`1m
`I
`
`C312
`o. 001
`
`CHASSIS)
`EARTH
`
`(
`
`+ C317
`1
`16V
`
`C214
`220
`4V
`
`Q305
`
`R21 6 ~¥2 l ;;. .-Rw.l3.-101_--,~...__
`3 lg~+L...t\,_1*-:I:+H--t RW M\
`2. 45 C310 3iJ
`
`~
`
`R304
`lOOk
`
`C309
`33+
`4V
`
`8~~}-~~~~
`
`330
`
`1. 85
`
`\;;,IX'
`
`Q60 1 2SB798
`
`C6l o
`SWITCHING
`Jv +
`:0. R
`/REGULATOR
`611
`0
`3· 3K C616
`., -~ 0.047
`1. 45
`5~M
`C609
`•-H-
`~~ t----~~~~
`
`R610
`lOOK
`
`C612
`o. 01
`
`C61~
`o. 01
`
`R612
`220k
`
`...
`
`~2. 4
`15
`
`~2. 3
`U
`
`R609
`150k
`
`R614
`!OK
`.to. 06 ~o. 45 ~o. s ~ o
`13
`12
`II
`10
`·~I
`NOTE
`
`IC601 CX20084
`CSERVO AMP>
`
`Q305
`MUTING
`
`D301
`SR506D
`
`IBATTERYI
`
`Q303
`2SB624
`
`REGULATOR
`
`2. 2 5 -+--"11~-t
`R308
`R307
`22k
`330
`
`~ 0. 16
`9
`
`R701
`:.· :k
`
`8
`,?.
`
`Q703
`2SC1623
`RECTIFIER
`
`L701
`I
`27P
`)r-..... •r;,_3,_---f----:.T.:.:.:tR~
`
`T701
`DC-DC
`
`3
`
`2
`icl06
`
`0.0018
`
`,
`
`5
`
`6
`
`1
`
`3
`
`8
`
`3
`
`62k
`
`'" ,.,?,',1,1.,
`
`RE2GSQUlLP6A12T30R
`
`1 C313
`o. 1
`
`o. 6
`
`R310
`2. 2M
`
`0303
`
`.---o---"'·~1...0. CNJ301
`~~--~----[DC IN 3VI
`®-.-e
`
`R602
`2. 2k
`
`R601
`!OK
`
`R605
`1M
`
`PLL ON/OFF AP
`
`~6. 5 :l
`
`7
`
`6
`
`o. 65
`
`5
`
`8
`
`IC602 MSM58141RS
`CPLLl
`
`1
`
`2
`
`3
`
`4
`
`T
`
`12
`
`Vp-p
`
`•3 3
`
`.
`
`I
`
`I
`
`E
`
`F
`
`G
`
`I
`I
`I
`I ~ 36pS __j
`I
`L
`
`I
`
`I
`
`I ~~~ !!81
`r lUI
`~/~9~Hz
`
`R604
`
`1M
`
`C16~P1
`
`2
`WP
`
`~630P3
`
`/ " ! AT
`.._6_. 4---1--' V \ / . '1':605 I
`lmS H
`1-----
`
`0.015
`
`6<11
`
`Q602
`
`--Q: 2SC1623
`~86~
`
`SWITCHING
`
`RAOJ
`
`R606
`
`2. 4k
`
`C604
`o. 1
`
`+ C615
`' g5~
`
`I . 25 •o. 8 ~ ~,:,
`I ' RV601
`1
`
`C607
`
`o. otT T6:gv
`
`+ C608
`
`22k tOBl
`~
`SPEED
`
`H
`
`J
`
`u l ·~
`'----..._ _ ___. __ ...._ _ ___..,___f-----+-----41-----f---.--_. _____ .._l _ _. _______ ___ --+---------..... ----t_-..._ __ _. ___ c _ _ _. ___ --4.,___.._-t----_..---.. Ao-U-T_o_oF_F_._+---<;r---'T SIZE"AA''
`L....---------1-------l------l------+----------------------------------------~----------------------------------------------------~
`- ------ - ------ - ------ - ------ - ----~--~r--~r---¢---- - ------ - ------ - ------ - ------ - ------ - ------ - ------ - ------ - ------ - ------ - ------ - ------ - -----~
`l®--
`L@-
`
`~
`~ ";\
`(!:)/
`2~~~6
`
`C701
`1160
`V +
`
`,...
`
`cr:r
`
`0.
`
`5:~4~1
`
`-.0. 35
`
`DE-sDc
`
`/.'1R704
`
`4. 7k
`
`'R702
`
`470
`
`4V
`
`m~
`
`.----+'-"-----~-6-8~-0-.-3-7.....
`
`~ 82837
`r-._l-1-' --+--0'"'-HJ-~ +
`Cj83 + Clz'o\
`4V • ~ j
`C33.134 ~ 0. 7 Cl4zV106
`+
`~---
`4V
`Q304 FMWI
`
`R309
`47k
`I"'" o. 125
`o. 7
`
`y
`
`I
`./_..--PLAY 76mA
`""
`FF
`SOmA
`REW
`65mA
`
`-=DRY BATTERY
`
`(IEC DE~:NATION)
`
`2PCS 3V
`
`N te:
`All capacitors are in ,uF unless otherwise noted. pF: .u.uF
`50WV or less are not indicated except for electrolytics
`and tantalums.
`All resistors are in n and 1/4 W or less unless otherwise
`specified.
`
`L-CH signal path
`- • ...... : R-CH signal path
`
`-11-
`
`M901
`MNR-1601A
`MOTOR
`
`FG901
`
`FG COl L
`
`• -= B+bus.
`c=J : adjustment for repair.
`Power voltage is 3 V and fed with regulated de power
`supply from
`Voltage variations may be noted due to normal produc(cid:173)
`tion tolerances.
`
`Waveforms are taken to ground in PLAY mode by using
`oscilloscope.
`Voltage variations may be noted due to normal produc(cid:173)
`tion tolerances.
`Switches:
`
`Ref. No.
`
`Switch
`
`S301
`S302
`S901
`
`TAPE
`DOLBY NR
`POWER
`
`Positi n
`
`NORM
`OFF
`ON
`
`•
`
`*1
`• Touching the pin No. 11 of IC601 with the tester probe
`causes an extra vibration inside the IC, which will be
`heard from the phones as a high-pitched sound.
`If the pin No. 11 of IC601 is touched with the tester
`probe, the voltage there will increase, and after about 1
`seco11d it will get higher than O.SV, so that the motor
`M901 will stop.
`-12-
`
`Exhibit 1009, Page 008
`
`

`
`IC BLOCK DIAGRAMS
`
`IC301 BA3304F
`
`IC601 CX20084
`
`1-
`:::::>
`0
`
`!
`
`!!':
`I
`
`E
`<(
`
`!!':
`+
`!
`
`u
`0
`
`1-
`:::>
`0
`....
`a:
`LL
`LL
`:::>
`CD
`
`0
`:z:
`<!)
`
`i ~
`
`1-
`:z
`
`....
`~
`
`1-
`:z
`
`....
`:IE
`;::
`
`WM-DDm
`
`LL
`LL
`0
`
`~
`
`IC302 NJM2063AM
`
`1-
`:::::>
`0
`
`a:
`,_
`0
`~
`;3
`(.!)
`:z
`
`~
`
`1-
`:::>
`c...
`:z
`
`>
`
`1-
`:::::>
`0
`u
`
`.... a:
`
`,_
`:z
`
`i
`
`....
`~
`
`!!':
`+
`
`!
`
`<!)
`LL
`
`!!':
`
`!
`
`<!)
`LL
`
`,_
`:::>
`0
`
`E"
`
`<(
`
`<!)
`LL
`
`i !::;!0
`
`CJ ,_
`.... :::>
`
`-'
`co
`t;
`
`,_
`:z
`
`....
`:IE
`;::
`
`!!':
`-'
`-'
`Cl.
`
`>
`
`LL
`LL
`0
`:z
`0
`a:
`w
`
`~
`
`• IC602 MSM58141RS
`
`GND
`8
`
`4/5 SELECT
`
`PC.OUT
`
`>
`
`0
`:z
`(.!)
`
`OSC2
`
`OSC3
`
`4
`Bt
`
`-13-
`
`Exhibit 1009, Page 009
`
`'C ....
`<=CJ
`00
`u..."'
`u..."-'
`
`1-
`:::::>
`c...
`
`~~ :z
`., ....
`
`a:O
`:z~
`
`"'
`,_
`:::::>
`0
`u
`~
`
`"'
`
`1-
`:::>
`0
`a:
`0
`1-
`:z
`0
`::;;
`
`N
`
`....
`
`...1
`CD
`<(
`0::
`;;
`
`1-
`:z
`<(
`1-
`en
`:z
`0
`<..:>
`w
`:IE
`;::
`
`N
`a:
`~
`
`~
`~
`
`<!)
`
`z
`
`~
`
`IC303 TA7688F
`
`

`
`WM-DD. I
`jREVISEDI
`
`SECTION 5
`EXPLODED VIEWS AND PARTS LIST
`
`NOTE:
`·The mechani ca 1 parts with no reference
`number in the exploded views are not
`supplied.
`·Items marked 11 * 11 are not stocked since
`they are seldom required for routine
`service. Some delay should be antici(cid:173)
`pated when ordering these items.
`
`5-1.
`
`•The construction parts of an assembled
`part are indicated with a collation
`number in the remark column.
`
`16
`
`·Color Indication of Appearance Parts
`Example:
`(RED) ..... KNOB, BALANCE
`(WH~TE)
`Parts' Color
`
`Cabinet's Color
`
`l
`
`20
`
`~7
`
`No.
`
`15
`
`16
`
`17
`18
`20
`21
`
`22
`23
`24
`25
`
`Part No.
`
`Description
`
`Remarks
`
`3-578-232-00
`3-578-232-11
`3-578-232-21
`
`(SILVER) ••• ORNA14ENT, ADJUSTMENT HOLE
`(RED) ••.••• ORNAMENT, ADJUSTMENT HOLE
`(BLACK) •••• ORNAMENT, ADJUSTMENT HOLE
`
`X-3310-953-1
`X-3310-954-1
`X-3310-955-1
`
`(SILVER) ••• PANEL ASSY, CASSETTE
`(BLACK) •••• PANEL ASSY, CASSETTE
`(RED) •••••. PANEL ASSY, CASSETTE
`
`3-578-101-00 PLATE, ORNAMENTAL
`*3-701-999-00 LABEL, SERIAL NUMBER
`3-578-236-00 SPRING (BATTERY)
`3-578-115-00 LID, BATTERY CASE
`
`*3-324-415-01 CUSHION
`3-578-114-0D PANEL, CHASSIS
`7-627-850-58 SCREW, PRECISION +P 1.4X3.5
`3-324-431-01 KNOB, VOL
`
`26
`27
`901
`
`3-310-979-01 BUTTON, SELECTION, TAPE
`3-310-978-01 BUTTON, SELECTION, NR (DOLBY)
`PC BOARD ASSY, MAIN
`A-3216-178-A
`
`--not supplied--
`
`No.
`
`Part No.
`
`rJescription
`
`Remarks
`
`X-3310-950-1
`X-3310-951-1
`X-3310-952-1
`
`(SILVER) ••• PANEL ASSY, CONTROL
`(BLACK) ••.• PANEL ASSY, CONTROL
`(RED) •••••• PANEL ASSY, CONTROL
`
`3-704-246-31
`3-704-246-32
`
`(SILVER) •••••• SCREW (P1.4X2.5)
`(BLACK,RED) ••• SCREW (P1.4X2.5)
`
`3-310-947-00 SPRING, COMPRESSION
`3-310-983-02 BUTTON, LOCK
`a 3~4 495 et
`3 324 436 11
`
`!5ftrE~.~E~) ..• t~B~t~ ~ not supp I i ed--
`( BLAGK) •••••••• LP.BEL , Bt __ 00t supp I i ed--
`(SILVER) •••••• LABEL, MODEL NUMBER
`(BLACK,RED) ••• LABEL, MODEL NUMBER
`
`*3-324-430-01
`*3-324-430-11
`
`3-307-831-00 SCREW, PANEL
`SCREW (M1.4X3), TOOTHED LOCK
`3-335-797-21
`3-831-441-11 CUSHION (B)
`9-911-838-XX CUSHION, METER
`
`9-911-816-01 CLOTH, DRAWER, BATTERY
`3-831-441-XX SPACER
`3-703-710-01 STICKER, SONY SYMBOL (12)
`3-578-109-00 CONTACT
`
`--
`
`2
`
`3
`4
`
`5
`
`6
`
`7
`8
`9
`10
`
`11
`12
`13
`14
`
`-14-
`
`Exhibit 1009, Page 010
`
`

`
`WM-DDm
`
`5-2.
`68
`
`~~
`
`69
`
`56
`
`No.
`
`Part No.
`
`Description
`
`Remarks
`
`No.
`
`Part No.
`
`Description
`
`Remarks
`
`~50
`
`50
`51
`52
`53
`54
`
`r:;r
`--::>
`56
`57
`58
`59
`
`60
`61
`62
`63
`64
`
`3-578-158-00
`3-578-123-00
`3-310-958-00
`X-3578-126-0
`X-3578-115-0
`
`GEAR, S
`SPRING, COMPRESSION
`WASHER
`CLAW ASSY , REEL
`CLAW ASSY, REEL
`
`*X-3578-105-0
`3-578-254-00
`3-578-181-00
`3-310-971-01
`7-627-553-37
`
`CHASSIS ASSY, HEAD
`RING, RETAINING, E1.2
`SPRING, HEAD
`HOOK, SPRING
`SCREW, PRECISION +P 2X3
`
`7-627-554-17
`7-627-553-98
`3-578-146-00
`X-3578-137-0
`3-578-220-00
`
`SCREW, PRECISION +P 2X3.5
`SCREW, PRECISION +P 2X8
`SPRING
`PINCH ROLLER ASSY
`SPRING, TENSION
`
`65
`66
`67
`68
`69
`
`70
`71
`72
`73
`74
`
`3-545-588-00 SPRING, TENSION
`X-3310-935-1 COVER ASSY, ERASE HEAD
`3-578-128-00 SPRING, COMPRESSION
`7-627-551-28 SCREW, PRECISION +P 1.4X2.5
`X-3310-908-0 HOLDER ASSY
`
`X-3310-910-0 CHASSIS ASSY
`7-627-850-48 +P 1.4X1.6
`7-671-112-01 STEEL, BALL (2m/m)
`3-578-127-00 SPRING, COMPRESSION
`7-627-851-27 SCREW, PRECISION +P 1.4X5
`
`SEAM (t=0.1)
`3-578-138-01
`75
`SEAM ( t=O . 2)
`3-578-138-11
`76
`HP901 1-543-423-11 HEAD, MAGNETIC (PLAYBACK)
`
`-15-
`
`Exhibit 1009, Page 011
`
`

`
`WM-DDm
`
`5-3.
`
`No.
`
`101
`102
`103
`
`104
`105
`106
`
`107
`108
`109
`
`110
`112
`113
`
`114
`115
`116
`
`118
`119
`120
`
`121
`123
`125
`
`126
`127
`128
`
`129
`130
`131
`
`132
`133
`134
`
`Part No.
`
`Description
`
`Remarks
`
`*X-3310-909-0 CHASSIS ASSY, SUB
`7-627-451-87 SCREW, PRECISION +K 1.4X2.2
`X-3310-907-0 STATOR ASSY
`
`3-701-438-01 WASHER
`X-3310-905-0 ROTOR ASSY
`7-627-850-79 SCREW, PRECISION +P 1.4X1.8 TYPE3
`
`3-310-930-00 PLATE, THRUST
`3-547-625-00 SCREW, THRUST ADJUST
`3-310-939-00 RUBBER, VIBRATION PROOF
`
`3-310-938-00 PLATE, SHIELD
`7-624-102-04 STOP RING 1.5, TYPE -E
`3-310-993-01 SPRING, COMPRESSION
`
`3-310-948-00 SPRING, TENSION
`7-627-851-17 SCREW, PRECISION +P 1.4X4.5
`3-310-921-00 SPRING, COMPRESSION
`
`X-3310-932-1 MOTOR BRAKET
`3-578-154-00 LEVER, DETECTION
`3-578-124-00 SPRING, COMPRESSION
`
`3-578-244-01 GEAR, FF
`3-310-914-00 GEAR, FWD
`3-578-249-00 SPRING, COMPRESSION (FWD BUTTON)
`
`X-3310-949-1 BUTTON ASSY, PLAY
`3-310-916-00 PLATE (B), HYSTERESIS
`3-310-920-00 PLATE (C), HYSTERESIS
`
`3-310-915-11 GEAR (B), DRIVING
`3-578-276-11 WASHER (10)
`3-578-224-00 WASHER (1.2 t=0.25)
`
`3-578-130-00 SPRING
`X-3578-121-0 LEVER ASSY, FWD
`3-578-224-11 WASHER (1.2 t=0.188)
`
`Remarks - - -
`
`No.
`
`135
`137
`138
`139
`
`140
`
`141
`142
`143
`
`144
`145
`146
`
`147
`148
`149
`
`150
`151
`152
`
`153
`154
`155
`
`156
`158
`159
`
`160
`163
`164
`
`Part No.
`
`Description
`
`3-310-959-00 SPRING, TENSION
`X-3578-142-0 LEVER (A) ASSY, DRIVING
`3-578-199-00 SPRING, COMPRESSION
`3-578-265-00 WASHER
`
`3-310-992-01 WASHER (t=0.13)
`3-310-992-11 WASHER (t=0.1)
`3-310-992-21 WASHER (t=0.08)
`3-578-162-00 GEAR, REW
`3-578-221-00 SPRING, COMPRESSION
`3-578-267-00 SCREW (+P1.4X1.6), PRECISION
`
`*3-578-149-00 SHAFT, LEVER (A), SHUT-OFF
`3-578-157-00 LEVER (B), SHUT-OFF
`3-578-214-00 SHAFT, GEAR, SHUT-OFF
`
`3-578-126-00 SPRING, TENSION
`3-305-509-00 LEVER (A), SHUTT-OFF
`3-578-178-00 GEAR, SHUT-OFF
`
`3-578-151-00 SHAFT, GEAR, FWD
`X-3310-948-1 BUTTON ASSY, STOP
`3-578-121-00 SPRING, COMPRESSION
`
`X-3578-114-0 PLATE ASSY, LOCK
`3-310-935-00 LEVER, SWITCH
`3-561-627-00 SPRING, TENSION
`
`3-578-277-00 SPRING, TENSION
`*3-578-196-00 HOOK, SPRING
`X-3310-947-1 BUTTON ASSY, F.R
`
`3-578-278-00 SPRING, COMPRESSION
`3-578-183-00 LEVER, RETURN, S
`7-627-850-18 SCREW, PRECISION +P 1.4X2.5
`
`X-3310-936-1 BRACKET ASSY, PANEL
`167
`M901 X-3310-922-1 MOTOR
`1-553-226-00 SWITCH, LEAF (POWER)
`S901
`-16-
`
`Exhibit 1009, Page 012
`
`

`
`WM-DDm
`
`SECTION 6
`ELECTRICAL PARTS LIST
`
`NOTE:
`Items marked " *" are not stocked since
`they are seldom required for routine
`service. Some delay should be a~tici-
`pated when ordering these items.
`If there are two or more same circuitsin a
`set such as a stereophonic machine, only
`typical circuit parts may be indicated and
`capacitors and resistors in other same
`circuits may be omitted.
`
`CAPACITORS:
`MF:]JF, P~:]J]JF.
`RESISTORS
`· All resistors are in ohms.
`· F : nonflammable
`COILS
`· MMH : mH, UH : 1JH
`SEMICONDUCTORS
`In each case, U : lJ, for example:
`UA •.• : ]JA •.. , UPA ..• : ]JPA •.. , UPC •.• : ]JPC,
`UPD ... : ]JPD ...
`
`ELECTRICAL PARTS
`
`ELECTRICAL PARTS
`
`Ref.No. Part No.
`
`Description
`
`Ref .No. Part No.
`
`Description
`
`901
`
`C101
`C102
`C103
`
`C104
`C105
`C106
`
`C107
`C108
`C109
`
`CllO
`C111
`Cll2
`
`C113
`Cll4
`C115
`
`C201
`C202
`C203
`
`A-3216-178-A
`
`PC BOARD ASSY, MAIN
`
`1-163-141-00 CERAMIC CHIP 0.001MF
`1-135-104-00 TANTAL. CHIP 10MF
`1-163-016-00 CERAMIC CHIP 0.0039MF
`
`1-135-103-00 TANTAL. CHIP 3.3MF
`1-163-035-00 CERAMIC CHIP 0.047MF
`1-135-087-21 TANTAL. CHIP 0.68MF
`
`1-163-017-00 CERAMIC CHIP 0.0047MF
`1-163-034-00 CERAMIC CHIP 0.033MF
`1-163-019-00 CERAMIC CHIP 0.0068MF
`
`3.3MF
`1-124-436-00 ELECT
`1-162-638-11 CERAMIC CHIP 1MF
`1-163-141-00 CERAMIC CHIP 0.001MF
`
`1-163-081-00 CERAMIC CHIP 0.22MF
`220MF
`1-124-434-00 ELECT
`1-163-141-00 CERAMIC CHIP 0.001MF
`
`1-163-141-00 CERAMIC CHIP 0.001MF
`1-135-104-00 TANTAL. CHIP 10MF
`1-163-016-00 CERAMIC CHIP 0.0039MF
`
`10%
`20%
`10%
`
`20%
`10%
`10%
`
`5%
`5%
`10%
`
`20%
`
`10%
`
`20%
`10%
`
`10%
`20%
`10%
`
`50V
`4V
`50V
`
`4V
`25V
`20V
`
`50V
`25V
`50V
`
`25V
`16V
`·50V
`
`25V
`4V
`50V
`
`50V
`4V
`50V
`
`4V
`25V
`20V
`
`C316
`C317
`C318
`
`C319
`C320
`C321
`
`C601
`C602
`C603
`
`C604
`C605
`C606
`
`C607
`C608
`C609
`
`C610
`C611
`C612
`
`C613
`C614
`C615
`
`220MF
`1-124-434-00 ELECT
`1-135-091-00 TANTA~. CHIP 1MF
`1-163-117-00 CERAMIC CHIP 100PF
`
`1-163-117-00 CERAMIC CHIP 100PF
`1-163-117-00 CERAMIC CHIP 100PF
`1-163-117-00 CERAMIC CHIP 100PF
`
`1-163-097-00 CERAMIC CHIP 15PF
`1-163-097-00 CERAMIC CHIP 15PF
`1-163-105-00 CERAMIC CHIP 33PF
`
`1-163-038-00 CERAMIC CHIP 0.1MF
`1-163-023-00 CERAMIC CHIP 0.015MF
`1-163-012-00 CERAMIC CHIP 0.0018MF
`
`0.01MF
`1-130-483-00 MYLAR
`1-124-435-00 ELECT
`10~1F
`1-163-021-00 CERAMIC CHIP 0.01MF
`
`1-135-091-00 TANTAL. CHIP 1MF
`1-163-810-00 CERAMIC CHIP 0.03MF
`1-163-021-00 CERAMIC CHIP 0.01MF
`
`1-163-021-00 CERAMIC CHIP 0.01MF
`0.033MF
`1-130-489-00 MYLAR
`1-135-070-00 TANTAL. CHIP 0.1MF
`
`20%
`10%
`10%
`
`10%
`10%
`10%
`
`5%
`5%
`5%
`
`10%
`10%
`
`5%
`20%
`5%
`
`10%
`10%
`5%
`
`5%
`5%
`20%
`
`4V
`16V
`50V
`
`50V
`50V
`50V
`
`50V
`50V
`50V
`
`25V
`50V
`50V
`
`50V
`6.3V
`50V
`
`16V
`25V
`50V
`
`50V
`50V
`35V
`
`C204
`C205
`C206
`
`C207
`C208
`C209
`
`C210
`C211
`C212
`
`C213
`C214
`C215
`
`C301
`C302
`C303
`
`C304
`C305
`C306
`
`C307
`C308
`C309
`
`C310
`C311
`C312
`
`C313
`C314
`C315
`
`1-135-103-00 TANTAL. CHIP 3.3MF
`1-163-035-00 CERAMIC CHIP 0.047MF
`1-135-087-21 TANTAL. CHIP 0.68MF
`
`1-163-017-00 CERAMIC CHIP 0.0047MF
`1-163-034-00 CERAMIC CHIP 0.033MF
`1-163-019-00 CERAMIC CHIP 0.0068t~F
`
`3.3MF
`1-124-436-00 ELECT
`1-162-638-11 CERAMIC CHIP 1MF
`1-163-141-00 CERAMIC CHIP 0.001MF
`
`1-163-081-QO CERAMIC CHIP 0.22MF
`220MF
`1-124-434-00 ELECT
`1-163-141-00 CERAMIC CHIP O.OOlMF
`
`33MF
`1-124-431-00 ELECT
`220MF
`1-124-434-00 ELECT
`1-163-038-00 CERAMIC CHIP 0.1MF
`
`47MF
`1-124-432-00 ELECT
`10MF
`1-124-435-00 ELECT
`1-163-021-00 CERAMIC CHIP 0.01MF
`
`1-135-103-00 TANTAL. CHIP 3.3MF
`22MF
`1-124-430-00 ELECT
`33MF
`1-124-431-00 ELECT
`
`1-135-103-00 TANTAL. CHIP 3.3MF
`1-163-141-00 CERAMIC CHIP 0.001MF
`1-163-141-00 CERAMIC CHIP 0.001MF
`
`1-163-038-00 CERAMIC CHIP 0.1MF
`1-135-103-00 TANTAL. CHIP 3.3MF
`220MF
`1-124-434-00 ELECT
`
`20%
`10%
`10%
`
`5%
`5%
`10%
`
`20%
`
`10%
`
`20%
`10%
`
`20%
`20%
`
`20%
`20%
`5%
`
`20%
`20%
`20%
`
`20%
`10%
`10%
`
`20%
`20%
`
`50V
`25V
`SO'J
`
`25V
`16V
`50V
`
`25V
`4V
`50V
`
`4V
`4V
`25V
`
`4V
`6.3V
`50V
`
`4V
`4V
`4V
`
`4V
`50V
`.50V
`
`25V
`4V
`4V
`
`C616
`C701
`C702
`
`C703
`C704
`C705
`
`1-163-035-00 CERAMIC CHIP 0.047MF
`10MF
`1-124-462-00 ELECT
`4. 714F
`1-124-461-11 ELECT
`
`1-135-104-00 TANTAL. CHIP 10MF
`1-163-081-00 CERAMIC CHIP 0.22MF
`1-163-117-00 CERAMIC CHIP 100PF
`
`10%
`20%
`20%
`
`20%
`
`10%
`
`25V
`16V
`16V
`
`4V
`25V
`50V
`
`CNJ 301 1-507-723-00
`
`JACK, EXTENTION POWER
`
`D301
`D302
`D303
`D701
`
`8-719-104-37 LED SR506D
`8-719-100-05 DIODE 1S2837
`8-719-100-05 DIODE 1S2837
`8-719-106-22 DIODE R07.5M-B1
`
`HP901 1-543-423-11 HEAD, MAGNETIC (PLAYBACK)
`
`IC301 8-759-910-18
`IC302 8-759-701-07
`IC303 8-759-200-95
`
`IC BA3304F
`IC NJt12063AM
`IC TA7688F
`
`IC601 8-759-909-45
`IC602 8-759-958-14
`
`IC CX20084
`IC MSM58141RS
`
`J301
`
`L701
`
`1-507-727-00
`
`JACK 2P (PHONES)
`
`1-410-209-51
`
`INDUCTOR CHIP
`
`27UH
`
`M901 X-3310-922-1 MOTOR
`
`Q302
`Q303
`Q304
`
`8-729-903-10 TRANSISTOR FMW1
`8-729-106-44 TRANSISTOR 2SB624-BV4
`8-729-903-10 TRANSISTOR FMW1
`
`-17-
`
`Exhibit 1009, Page 013
`
`

`
`WM-DDm
`
`ELECTRICAL PARTS
`
`ELECTRICAL PARTS
`
`Ref .No. Part No.
`
`Description
`
`Ref .No. Part No.
`
`Description
`
`Q305
`Q601
`Q602
`
`Q701
`Q702
`Q703
`
`RlOl
`Rl02
`R103
`
`Rl04
`Rl05
`R106
`
`R107
`R108
`Rl09
`
`R110
`R111
`R112
`
`Rll3
`R114
`Rl15
`
`8-729-100-76 TRANSISTOR 2SA812
`8-729-101-07 TRANSISTOR 2SB798
`8-729-100-66 TRANSISTOR 2SC1623
`
`8-729-100-66 TRANSISTOR 2SC1623
`8-729-159-64 TRANSISTOR 2SD596
`8-729-100-66 TRANSISTOR 2SC1623
`
`1-216-089-00 METAL CHIP
`1-216-101-00 METAL CHIP
`1-216-117-00 METAL CHIP
`
`1-216-085-00 METAL CHIP
`1-216-748-11 METAL CHIP
`1-216-089-00 METAL CHIP
`
`1-216-112-00 METAL CHIP
`1-216-061-00 METAL CHIP
`1-216-089-00 METAL CHIP
`
`1-216-067-00 METAL CHIP
`1-216-053-00 METAL CHIP
`1-216-306-11 METAL CHIP
`
`1-216-053-00 METAL CHIP
`1-216-037-00 METAL CHIP
`1-216-089-00 METAL CHIP
`
`47K
`150K
`680K
`
`33K
`39K
`47K
`
`430K
`3.3K
`47K
`
`5.6K
`1.5K
`3.9
`
`1.5K
`330
`47K
`
`5%
`5%
`5%
`
`5%
`5%
`5%
`
`5%
`5%
`5%
`
`5%
`5%
`5%
`
`5%
`5%
`5%
`
`5%
`5%
`5%
`
`1/lOW
`1/lOW
`1/lOW
`
`1/lOW
`1/lOW
`1/lOW
`
`1/lOW
`1/lOW
`1/lOW
`
`1/lOW
`1/lOW
`1/10W
`
`1/lOW
`l/10W
`1/lOW
`
`1/10W
`1/lOW
`1/lOW
`
`R606
`R607
`R608
`
`R609
`R610
`R611
`
`R612
`R613
`R614
`
`R701
`R702
`R703
`R704
`
`1-216-058-00 METAL CHIP
`1-216-093-00 METAL CHIP
`1-216-092-00 METAL CHIP
`
`1-216-101-00 METAL CHIP
`1-216-097-00 METAL CHIP
`1-216-061-00 METAL CHIP
`
`1-216-105-00 METAL CHIP
`1-216-097-00 METAL CHIP
`1-216-073-00 METAL CHIP
`
`1-216-061-00 METAL CHIP
`1-216-041-00 METAL CHIP
`1-216-113-00 METAL CHIP
`1-216-065-00 METAL CHIP
`
`2.4K
`68K
`62K
`
`150K
`lOOK
`3.3K
`
`220K
`lOOK
`lOK
`
`3.3K
`470
`470K
`4.7K
`
`5%
`5%
`5%
`
`5%
`5%
`5%
`
`5%
`5%
`5%
`
`5%
`5%
`5%
`5%
`
`1/lOW
`1/lOW
`1/lOW
`
`1/lOW
`1/lOW
`1/lOW
`
`1/lOW
`1/lOW
`1/lOW
`
`1/lOW
`1/lOW
`1/lOW
`1/lOW
`
`RVlOl 1-237-299-11 RES, ADJ, METAL GLAZE 2.2K (PB LEVEL)
`RV201 1-237-299-11 RES, ADJ, METAL GLAZE 2.2K (PB LEVEL)
`RV301 1-230-485-11 RES, VAR, CARBON lOK/lOK (VOLUME)
`RV601 1-237-301-11 RES, ADJ, METAL GLAZE 22K (SPEED)
`
`S301
`S302
`S901
`
`T701
`
`X601
`
`1-553-280-00 SWITCH, SLIDE (NOR/METAL Cr02)
`1-554-585-00 SWITCH, SLIDE (M-N)(DOLBY NR)
`1-553-226-00 SWITCH, LEAF (POWER)
`
`1-447-697-00 TRANSFORMER, DC-DC CONVERTOR
`
`1-567-260-11 VIBRATOR, CRYSTAL (27.77kHz)
`
`R201
`R202
`R203
`
`R204
`R205
`R206
`
`R207
`R208
`R209
`
`R210
`R211
`R212
`
`R213
`R214
`R215
`
`R301