`
`
`
`Report
`
`
`
`On
`
`
`
`Stability of Polypeptides and Proteins
`
`
`
`
`SUBMITTED BY:
`
`
`
`Sr. NO.
`
`NAME
`
`ID NO.
`
`1.
`
`Gunja Chaturvedi
`
`2008H146101
`
`
`
`Submitted for the partial fulfillment of the requirements of the course
`
`Advanced physical pharmaceutics (PHA G542)
`
`
`
`
`
`
`
`BIRLA INSTITUTE OF TECHNOLOGY AND SCIENCE
`
`PILANI (RAJASTHAN)
`
`AUGUST, 2009
`
`1
`
`
`
`
`
`Page 1
`
`NPS EX. 2039
`CFAD v. NPS
`IPR2015-01093
`
`
`
`Stability of Polypeptides and Proteins
`
`Background:
`
`Proteins comprise an extremely heterogeneous class of biological macromolecules. They are
`
`often unstable when not in their native environments, which can vary considerably among cell
`
`compartments and extracellular fluids. Their properties make them particularly difficult to
`
`formulate but, with right approach, they can be developed into effective therapies. Proteins
`
`and polypeptides are fast becoming an important segment of the pharmaceutical industry.
`
`Although there have been tremendous advances in production of the active pharmaceutical
`
`ingredient (API), production of the peptide-based drug products is still a significant challenge.
`
` Peptides are defined as polypeptides of less than 50 residues or so and lacking any organized
`
`tertiary or globular structure. Some do adopt secondary structure, although this tends to be
`
`limited, for example a single turn of an α-helix. While their smaller size makes them easier to
`
`deliver across biological barriers than larger proteins, their formulation can be problematic.
`
`
`
`Mainly because of their chemical instability or degradation like by hydrolysis and racemization
`
`and physical degradation depending upon their molecular weight, they undergo denaturation,
`
`aggregation and precipitation; they are very challenging to be formulated in desired dosage
`
`form.
`
`Proteins and peptides exhibit the following challenges to the formulation scientists:
`
` They exhibit maximal chemical instability.
`
`
`
`2
`
`Page 2
`
`
`
` They tend to self associate.
`
` They adopt multiple conformers.
`
` They can exhibit complex physical instabilities, such as gel formation.
`
`Chemical and physical properties of peptides and proteins have been studied extensively and
`
`the thermodynamics of protein structure have also been studied in detail and reported. But
`
`because of the complicated degradation mechanisms, it is generally more difficult to predict
`
`the stability of peptide and protein pharmaceuticals.
`
`
`
`Proteins and peptides undergo degradation by two mechanisms:
`
`a) Physical mechanisms
`
`b) Chemical mechanisms
`
`
`
`PHYSICAL INSTABILITY:
`
`Physical instability or noncovalent changes are generally observed in case of larger peptides
`
`and proteins. Physical degradation includes denaturation, self association, aggregation,
`
`adsorption, and gelation.
`
`
`
`Denaturation: protein Denaturation is mainly associated with any modification in conformation
`
`not accompanied by rupture of peptide bonds and ultimate step might correspond to a totally
`
`unfolded polypeptide structure which can be reversible or irreversible. It can also results in loss
`
`of bioactivity mainly because of the alteration the tertiary structure of the proteins.
`
`Furthermore, exposure of hydrophobic groups upon Denaturation often leads to adsorption on
`
`the surfaces, aggregation, and precipitation. Denaturation sometimes also triggers the chemical
`
`degradation pathways often not seen with the native or natural tertiary (and/or quaternary)
`
`structure. Other effects of Denaturation are:
`
` Decreased solubility
`
` Altered water binding capacity
`
` Destruction of toxins
`
`
`
`3
`
`Page 3
`
`
`
`
`
`
`
`
`
`Improved digestibility
`
`Increased intrinsic viscosity
`
`Inability to crystallize
`
`
`
`
`
`
` Denatured proteins
`
`
`Causes of protein Denaturation:
`
`1. Temperature fluctuation
`
`- Effect of increased temperature:
`
` Affect interactions of tertiary structure
`
`
`
`Increased flexibility → reversible
`
` H-bonds begin to break → water interaction
`
`
`
`
`
`Increased water binding
`
`Increased viscosity of solution
`
` Structures different from native protein
`
`
`
`
`
`- Effect of decreased temperature:
`
` Can result in Denaturation(for e.g.Gliadins, egg and milk proteins)
`
` Remain active( for e.g.Some lipases and oxidases and Release from sub-cellular
`
`compartments)
`
` Proteins with high hydrophobic/polar amino
`
`residues and structures dependent on hydrophobic interactions
`
`
`
`
`
`4
`
`Page 4
`
`
`
`2. Water content affects heat Denaturation
`
`3. Mechanical treatments
`
`4. Hydrostatic Pressure
`
`5. Irradiation
`
`6. Heavy metal salts act to denature proteins in much the same manner as acids and bases.
`
`Heavy metal salts usually contain Hg+2, Pb+2, Ag+1 Tl+1, Cd+2 and other metals with high
`
`atomic weights. Since salts are ionic they disrupt salt bridges in proteins. The reaction of
`
`a heavy metal salt with a protein usually leads to an insoluble metal protein salt.
`
`7. Heavy metals may also disrupt disulfide bonds because of their high affinity and
`
`attraction for sulfur and will also lead to the denaturation of proteins
`
`
`
` Self association: The propensity of peptides to self-associate is connected with their physical
`
`instability. While self-association of peptides for e.g. melittin and corticotrophin – releasing
`
`factor (CRF), the relationship between these metastable oligomeric species and larger
`
`aggregates has been investigated, but still unclear. Noncovalent aggregation has been
`
`suggested for many other proteins, but not always confirmed. For e.g. a conjugate formed
`
`between a vinca alkaloid and a monoclonal antibody exhibited aggregation in solution, the
`
`mechanism of which (covalent or noncovalent) was not clear. Aggregates formed upon
`
`agitation of insulin solutions in the presence of hydrophobic surfaces (Teflon) were dissociated
`
`with urea, suggesting noncovalent aggregation.
`
`
`
`Aggregation can lead to either amorphous or ordered forms. Ordered aggregates usually take
`
`the form of fibrils; these fibrillar structures are the basis for the most common type of the
`
`aggregation seen for peptides, namely gelation.Gelation is the last step in a pathway that starts
`
`with the formation of peptides protofibrils that exhibit β-sheet structure. The protofibrils then
`
`associate to form mature fibrils, which propagate and intertwine, resulting in gelation.
`
`Detection of aggregates: Insoluble aggregates can be detected by FTIR, Raman, and electron
`
`spin resonance spectroscopy, or light scattering techniques (UV absorption). Soluble aggregates
`
`can be detected by HP-SEC (High Performance Size Exclusion Chromatography), found in many proteins
`
`like hGH, insulin, interferon-2 (lL-2), anti trypsin-a1,IFN-g, basic fibroblast growth factor and IFN-b.
`
`
`
`5
`
`Page 5
`
`
`
`Adsorption: The interaction of proteins with the surface of their storage containers is
`
`potentially a significant problem. The amphiphilic nature of the protein molecule results in their
`
`adsorption to a wide variety of surfaces and also both their loss and destabilization. Adsorption
`
`of protein on surfaces is an important phenomenon, which should be considered while
`
`formulating and selecting container and closure for pharmaceutical products. This is extremely
`
`important
`
`in
`
`low dose drugs. Adsorption to a surface
`
`is problematic
`
`in parenteral
`
`administration.
`
`Detection of adsorption of proteins: X-ray and neutron reflection are used to study the
`
`adsorption of protein at liquid-gas and solid-liquid interfaces, and parameters like adsorbed
`
`amount, total thickness of the adsorbed layer, pH, and excipients.
`
`
`
`Gelation is the process that converts a fluid solution into a semi-solid mass. Microscopic
`
`examination reveals that the gel is composed of multiple peptide fibrils, intertwined in a
`
`complex mesh. It is known that pH, temperature and ionic strength all affect the rate of
`
`gelation, as well as the physical properties of the gel –for e.g. Transparency, gel stiffness,
`
`reversibility and so on. These factors all suggest that colloidal stability plays an important role in
`
`gel formation.
`
`Colloidal stability determines whether peptide molecules are attached to each other or
`
`repelled. Low colloidal stability means that the net forces between peptide molecules are
`
`attractive overall, which leads to decreased solubility and increased likelihood to assemble into
`
`larger structures, such as fibrils. Conversely, increased colloidal stability indicates net repulsive
`
`forces between peptides, which improves solubility and diminishes growth of organised fibrils.
`
`Stabilization: The problem of aggregation can be overcome, by modulating the solution
`
`conditions such as pH, buffer composition and ionic strength and by addition of other
`
`excipients. Like Cyclodextrins have been shown to improve the physical stability of peptides by
`
`shielding hydrophobic amino acids. For Glucagon the addition of cyclodextrins was found to
`
`delay the formation of insoluble aggregates. Similarly, the addition of sucrose has been shown
`
`to improve the physical stability of bioactive peptides. To overcome the problem of adsorption
`
`
`
`6
`
`Page 6
`
`
`
`of proteins to surfaces, the adsorption of an inert protein like serum albumin to saturate the
`
`container surface, or compounds that reduce surface interactions such as surfactants,
`
`carbohydrates or aminoacids, can be employed. In formulation, surfactant addition can reduce
`
`adsorption losses e.g., Tween 80 and Pluronic F68 have been shown to reduce the adsorption of
`
`calcitonin to a glass surface. The preservatives and surfactants are sometimes essential in
`
`protein formulation for prevention of microbial growth, and to prevent aggregation and
`
`adsorption.For avoiding the problem of Denaturation, Proteins and peptides are often
`
`formulated with excipients such as polyalcohols and polymers, to protect them during freeze-
`
`drying and storage. Polymers are also used to form a matrix, for controlled release. Excipients
`
`such as heparin, and anionic polymers, decreased the rate of covalent aggregation in
`
`recombinant human keratinocyte growth factor (rhKGF), at elevated temperatures.Polyhydric
`
`alcohols like mannitol, sorbitol, and non reducing sugars like dextrose, sucrose, and trehalose,
`
`are the most commonly used excipients in lyophilized protein and peptide formulations. Also
`
`the optimum conditions of temperature, pH , ionic strength and moisture are need for the
`
`stabilization of the proteins and peptides from the problem of gelation.
`
`
`
`CHEMICAL STABILITY
`
`Occurs through the following mechanisms:
`
` Deamidation
`
` Oxidation
`
` Cystine destruction and thiol- disulfide exchange
`
` Hydrolysis at aspartic acid residue
`
` C- terminal succinimide formation at asparagines residue
`
` Diketopiperazine formation
`
` Deglycosylation and desialylation
`
` Photodegradation of proteins
`
` Enzymatic proteolysis and autolysis
`
` Proteases activity during fermentation and cell culture
`
`
`
`7
`
`Page 7
`
`
`
`Deamidation: Deamidation is a common post-translational modification resulting in the
`
`conversion of an asparagine residue to a mixture of isoaspartate and aspartate. Deamidation of
`
`glutamine residues can occur but does so at a much lower rate. Deamidation can occur under
`
`acidic, neutral or alkaline conditions, although the chemical mechanism of hydrolysis is strongly
`
`dependent of pH.
`
`Deamidation has been observed and characterized in a wide variety of proteins. It has been
`
`shown to regulate some time-dependent biological processes and to correlate with others, such
`
`as development and aging. Deamidation can make protein prone to proteases and
`
`denaturation. This can affect the in vivo half-life, activity, and conformation of protein, and also
`
`increase the immunogenicity of certain protein. For e.g In insulin formulation lyophilized from
`
`acidic solutions (pH3-5), the rate determining first step involves intermolecular nucleophilic
`
`attack of the C-terminal AsnA 21 carboxylic acid onto the side chain amide carbonyl, to release
`
`ammonium, and to form reactive cyclic anhydride intermediate which can further react with
`
`various nucleophiles.
`
`The protein deamidation process involves the conversion of the amide side-chain moieties of
`
`asparagine and glutamine residues to carboxyl groups. This conversion is an unusual form of
`
`protein modification in that it requires catalysis by an intramolecular reaction where both the
`
`substrate (asparagine and glutamine side chains) and "catalytic site" (the peptide nitrogen of
`
`the succeeding residue) are constituents of several consecutive residues along the polypeptide
`
`chain. Deamidation of asparaginyl (Asn) and glutaminyl (Gln) residues to produce aspartyl (Asp)
`
`and glutamyl (Glu) residues causes structurally and biologically important alterations in peptide
`
`and protein structures. At neutral pH, deamidation introduces a negative charge at the reaction
`
`site and can also lead to structural isomerization. The rates of deamidation depend on primary
`
`sequence, three-dimensional (3D) structure, pH, temperature, ionic strength, buffer ions, and
`
`other solution properties.
`
`
`
`
`
`8
`
`Page 8
`
`
`
`Scheme showing the deamidation, isomerization, and racemization of peptides having
`asparagine oraspartic acid residues
`
`
`
`
`
`
`
`Detection: It is detected by charge, molecular weight, and formation of succinimide residues or
`
`isoaspartic acid residues and peptides maps, capillary electrophoresis, isoelectric focusing, and
`
`enzyme catalyzed radio labeling of the isoaspartyl sites. Also recently an advanced technique
`
`has been used which is probing Deamidation events by using anion exchange and RP- HPLC to
`
`isolate two deamidated forms of recombinant hirudin at pH 3 and 37o C .
`
`Stabilization: Formulation approaches include lowering of pH (desialylation can occur,
`
`therefore optimization essential), compatibility studies in presence of various buffers, because
`
`deamidation is also affected by buffer composition.
`
`
`
`9
`
`Page 9
`
`
`
`
`
`Oxidation: Oxidation generally occurs in Methionine, cystine, (more common) tryptophan,
`
`tyrosine residues. The oxidation of methionine residues has been associated with the loss of
`
`biological activity in a number of peptides and proteins. Its oxidation results in conversion of
`
`the thioether to its sulphoxide counterpart. But this is a reversible reaction in which the
`
`methionine residue can be generated either by reducing agents or enzymatically.
`
`Oxygen radicals can be generated in vitro by compounds commonly used in protein
`
`folding/unfolding studies. For e.g. small amount of copper in presence of glucose oxidizes a
`
`particular methionine residue in α1 – proteinase inhibitor, whereas the autooxidation of the
`
`reducing sugars can inactivate the enzyme rhodanese with a concomitant loss in sulfhydryl
`
`titer. In addition, air oxidation of DTT can lead to H2O2 generation and subsequent protein
`
`oxidation.
`
`Detection: Peptide maps are convenient for detecting methionine oxidation, and MS.RP- HPLC
`
`is used to separate the oxidized forms.
`
`Stabilization: Formulation approaches include addition of anti oxidants, (sodium thiosulphate,
`
`catalase, or platinum), and adjustment of environmental conditions (pH, or temperature).
`
`Cystine oxidation can be prevented by keeping low pH. Other Formulation approaches include,
`
`maintaining acidic pH, and avoiding potential reducing agents (like anti-oxidant excipients),
`
`lyophilization, substituting non critical cystine residues with other residues to reduce the
`
`potential instability of free thiols in presence of disulphide e.g. human interferon (IF-N) beta
`
`analogue.
`
`Cystine destruction and thiol- disulfide exchange: Cystine residues (disulfides) are naturally
`
`occurring crosslinks
`
`that covalently connect polypeptide chains either
`
`intra – or
`
`intermolecularly. Disulfides are formed by oxidation of thiol groups of cysteine residues by
`
`either thiol disulfide interchange or direct oxidation. Intracellular proteins usually lack such
`
`crosslinks and their atypical presence commonly reflects a role in enzyme’s catalytic mechanism
`
`or involvement in the regulation of its activity. In contrast, extracellular proteins frequently
`
`
`
`10
`
`Page 10
`
`
`
`contain disulfide bonds, probably reflecting the need for the increased stability of such
`
`proteins.
`
`Formation of a disulfide bond through oxidation of cysteine residues
`
`
`
`Covalent bond formation, other than disulfide bond formation, is also involved in other
`
`intermolecular cross-linkages. The covalent
`
`linkages
`
`in the aggregates of freeze-dried
`
`ribonuclease A appeared to result from the participation of lysine, asparagine, and glutamine
`
`residues as suggested by amino acid analysis of the aggregates.
`
`Detection: By a systematic approach using UV spectroscopy, size-exclusion HPLC, and reversed-
`
`phase chromatography. By running reduced and non reduced gel electrophoresis; SDS-PAGE
`
`,ellman’s reagents for thiols detection, peptide mapping and matrix assisted Laser Desorption
`
`Ionization MS.
`
`Stabilization: By avoiding the use of potential reducing agents and avoiding moisture i.e the
`
`proteins should be kept in anhydrous conditions.
`
`
`
`C- Terminal succinimide formation at asparagines residue: Succinimide formation at the
`
`asparagines residues can potentially lead to the spontaneous cleavage of polypeptide chains. In
`
`this case, the side chain amide nitrogen attacks the peptide bond to form a C- terminal
`
`succinimide residue and newly formed amino terminal.
`
`Diketopiperazine formation: Peptides and proteins that possess an N- terminal sequence in
`
`which ‘Pro’ is the penultimate residue undergo non – enzymatic hydrolysis yielding a
`
`Diketopiperazine (DKP),which arises from the first two amino acids , and truncated polypeptide.
`
`The mechanism of DKP formation involves nucleophilic attack of N- terminal nitrogen on
`
`carbonyl carbon of the peptide bond between the second and third amino acid residues in the
`
`primary sequence. This intramolecular aminolysis reaction occurs readily in aqueous solutions
`
`
`
`11
`
`Page 11
`
`
`
`and was shown to be catalyzed in both acidic and basic conditions. DKP formation was reported
`
`to occur in human growth hormone, bradykinin and histrelin.
`
`Diketopiperazine formation in proteins
`
`
`
`Detection: The DKP products can be detected by N- terminal sequence analysis ,MS and tryptic
`
`mapping. But before that the DKP products are separated by using hydrophobic interaction
`
`chromatography.
`
`Hydrolysis at aspartic acid residue: Hydrolysis is a pathway often observed during peptide and
`
`protein degradation. As shown in scheme. Aspartic acid residues in particular are susceptible to
`
`hydrolysis in theacidic pH range.for e.g. Secretin, apart from undergoing isomerization, also
`
`undergoes degradation by hydrolysis of its aspartic acid residues at position-3 and position-15.
`
`Hydrolysis of aspartic acid residues under acidic conditions has also been observed with
`
`recombinant human macrophage colony-stimulating factor,recombinant human interleukin-11
`
`,and a hexapeptide. Hydrolysis may also occur at serine and histidine residues. Peptides and
`
`proteins having an aspartic acid residue also undergo isomerization, and racemization via cyclic
`
`imide formation L-aspartic acid peptide can isomerize to L-iso-aspartic acid peptide via its L-
`
`cyclic imide. The L-cyclic imide intermediate is capable of undergoing racemization to the D-
`
`cyclic imide and thus forms the D-aspartic acid peptide and the D-iso-aspartic acid peptide on
`
`hydrolysis.
`
`
`
`12
`
`Page 12
`
`
`
`
`
`Pathways proposed for the hydrolysis of peptides at aspartic acid residues
`
`Deglycosylation and desialylation: In glycoproteins, sugars are attached either to the amide
`
`nitrogen atom in the side chain of asparagines (termed N-linkage), or to the oxygen atom in the
`
`side chain of serine or threonine (termed O-linkage). An asparagine residue can accept an
`
`oligosaccharide only, if the residue is part of an Asn-X-Thr sequence, where X can be any
`
`residue. Thus, a potential glycolisation site can be detected within aminoacid sequences. There
`
`are a number of glycosylated proteins that have sugar and sialic acid molecules covalently
`
`linked to peptide structure. e.g.,
`
`IFN-beta has greater stability to aggregation than
`
`corresponding protein produced by bacterial
`
`fermentation;
`
`in the non-glycosylated
`
`form.Desialylation can occur at acidic pH on storage. Differing sialic acid content has shown to
`
`be responsible for variability in the biological activity of highly purified pituitary lutinizing
`
`hormone isoforms. The modification of human insulin by the covalent attachment of
`
`monosaccharide moieties to insulin amino groups altered the aggregation and self association
`
`behavior, and improved both the pharmaceutical stability and biological response.
`
`
`
`Detection: Change in glycocylation can be detected by various gel methods including
`
`flurophore - assisted carbohydrate electrophoresis (FACE) and MS. Change in sialic acid content
`
`can be detected by measurement of free sialic acid. Oligosaccaride structure can be analyzed by
`
`
`
`13
`
`Page 13
`
`
`
`normal phase HPLC combined with MS, and high resolution of normal phase, by high pH anion
`
`exchange chromatography combined with MS.
`
`Photodegardation of proteins: Both ionizing and non ionizing radiations can cause protein
`
`inactivation. The effects of different types of ionizing radiations (γ- rays , X –rays ,electrons and
`
`α- particles)on protein molecule ( both in solid and solution states). Non –ionizing radiations
`
`like UV rays also may cause irreversible damage to the protein molecules. These effects are of
`
`particular concern biologically in understanding the mechanism of cataract formation and
`
`sunburn damage. The amino acids tryptophan, tyrosine and cysteine are particularly
`
`susceptible to UV-A (320- 400 nm) and UV- B ( 250 – 320nm) photolysis. The absorption of
`
`photon leads to the photoionization and the formation of photodegaradation products through
`
`either direct interaction with an amino acid or indirectly via various sensitizing agents (such as
`
`dyes,riboflavin or oxygen). Commonly observed photodegardation product in an aerated,
`
`neutral pH, aqueous protein solution include S-S bond fission , conversion of tyrosine to DOPA,
`
`3-(4- hydroxyphenyl)lactic acid and dityrosine as well as fragmentation byproducts and the
`
`conversion of tryptophan residues to kynurenine and N- formyl- kynurenine . It is also important
`
`to take into account, potential damage to the protein during analysis using circular dichorism (CD), UV or
`
`fluorescent measurements, where incident radiation is being used.
`
`Detection: UV spectroscopy can be used to study changes in secondary and tertiary structures of
`
`proteins. As protein is denatured, differences are observed in the absorption characteristics of the
`
`peptide bonds due to the disruption of the exciton system.
`
`Enzymatic proteolysis and autolysis: Some of enzymes have been identified in vivo that
`
`specifically interact with covalently modified proteins, including carboxymethyl transferases
`
`(which methylates isoaspartyl residues) and alkaline proteases (which degrades oxidized
`
`proteins). It has been proposed that covalent changes caused by in vivo protein oxidation are
`
`primarily responsible for the accumulation of catalytically compromised and structurally altered
`
`enzymes during aging.
`
`
`
`14
`
`Page 14
`
`
`
`Proteases activity during fermentation and cell culture: Presence of protease enzyme can
`
`result in the cleavage of recombinant protein. Protease inhibitors can minimize this to a certain
`
`extent.
`
`GENERAL CONSIDERATIONS FOR PROTEIN STORAGE
`
`Temperature:
`
` Generally, proteins are best stored at ≤ 4°C in clean, autoclaved glassware or
`
`polypropylene tubes. Storage at room temperature often leads to protein degradation
`
`and/or inactivity, commonly as a result of microbial growth. For short term storage (1
`
`day to a few weeks), many proteins may be stored in simple buffers at 4°C.
`
`
`
` For long term storage for 1 month to 1 year, some researchers choose to bead single-
`
`use aliquots of the protein in liquid nitrogen for storage in clean plastic containers under
`
`liquid nitrogen. This method involves adding the protein solution drop wise (about 100
`
`μl each) into a pool of liquid nitrogen, then collecting the drop-sized frozen beads and
`
`storing them in cryovials under liquid nitrogen.
`
` Frozen at -20°C or -80°C is the more common form of cold protein storage. Because
`
`freeze-thaw cycles decrease protein stability, samples for frozen storage are best
`
`dispensed and prepared in single-use aliquots so that, once thawed, the protein solution
`
`will not have to be refrozen. Alternatively, addition of 50% glycerol or ethylene glycol
`
`will prevent solutions from freezing at -20°C, enabling repeated use from a single stock
`
`without warming (i.e., thawing).
`
`
`
`
`
`Protein Concentration:
`
`Dilute protein solutions (< 1 mg/ml) are more prone to inactivation and loss as a result of low-
`
`level binding to the storage vessel. Therefore, it is common practice to add “carrier” or “filler”
`
`protein, such as purified bovine serum albumin (BSA) to 1-5 mg/ml (0.1-0.5%), to dilute protein
`
`solutions to protect against such degradation and loss.
`
`
`
`15
`
`Page 15
`
`
`
`Additives:
`
`Many compounds may be added to protein solutions to lengthen shelf life:
`
` Cryoprotectants such as glycerol or ethylene glycol to a final concentration of 25-50%
`
`help to stabilize proteins by preventing the formation of ice crystals at -20°C that
`
`destroy protein structure.
`
` Protease inhibitors prevent proteolytic cleavage of proteins like Benzamidine for Serine
`
`proteases, Pepstatin A for Acid proteases , Leupeptin for Thiol proteases etc.
`
` Anti-microbial agents such as sodium azide (NaN3) at a final concentration of 0.02-
`
`0.05% (w/v) or thimerosal at a final concentration of 0.01 % (w/v) inhibit microbial
`
`growth.
`
` Metal chelators such as EDTA at a final concentration of 1-5 mM avoid metal-induced
`
`oxidation of –SH groups andhelps to maintain the protein in a reduced state.
`
` Reducing agents such a dithiothreitol (DTT) and 2-mercaptoethanol (2-ME) at final
`
`concentrations of 1-5 mM also help to maintain the protein in the reduced state by
`
`preventing oxidation of cysteines.
`
`
`
`REFERENCES:
`
` Stability of drug and dosage form (Sumie Yoshioka and Valentino J. Stella)
` Protein stability and folding,Theory and practice (Bret A. Shirley)
` Pharmaceutical formulation development of peptides and proteins (Sven Frokjaer and Lars
`Hovgaard)
`
` Stability of proteins in aqueous solution and solid state( S.Jacob , AA Shirwaikar,KK Srinivasan;
`Manipal college of pharmaceutical sciences) IJPS(Year : 2006 ; Volume : 68 ; Issue : 2 ; Page :
`154-163)
` Deamidation in Proteins and Peptides(Glen Teshima)
` Amino Acid Degradation (Bryant Miles)
`
`16
`
`
`
`
`
`
`
`
`
`Page 16