`Oracle Corp., et al v. Crossroads Systems, Inc.
` IPR2014-01207 and IPR2014-1209
`
`1 of 10
`
`CROSSROADS EXHIBIT
`Oracle Corp. v. Crossroads Systems, Inc.
`IPR2015-0(cid:1005)(cid:1004)(cid:1010)(cid:1010)
`
`2314
`
`
`
`Verrazano Enclosure Specification
`
`Fioviaion -11
`
`Verrazano Enclosure Specification ,
`
`The information contained herein is confidential in nature and is to be used only with written
`permission from Crossroads Systems. Inc..
`
`The information contained in this document has been carefully checked and is believed to be
`entirely reliable.
`However. no respcnslaliity is assumed for
`inaccuracies.
`Furthermore.
`Crossroads Systems, Inc... reserves the right to change this document and product without notice
`and to make improvements in reliability. function and design without notice. crossroads Systems.
`Inc... neither assumes any liability arising out of the application or use or any product. software or
`circuit described herein. nor does it convey any license under its right or the rights or others.
`companies. names. and data used in examples herein are ilctitious unless otnemise noted. No
`part of this document may be reproduced or transmitted In any form or by any means, electronic.
`mechanical. tor any purpose. without the express written permission of Crossroads Systems. Inc..
`
`©1996 Crossroads Systems. inc. All rights reserved.
`
`Crossroads Systems is a
`countries.
`
`trademark of Crossroads Swtems.
`
`inc...
`
`in the USA and other
`
`Copyright 0 1997
`Crossroads Systems. Inc.
`Building 1. Ms 225
`8101 West Courtyeml Drive
`- Austin. Texas 78730
`
`tstaiaieaoaoo
`Hm rmmamomn
`
`inio@crossroads.oorn
`support@crossroads.oom
`http://www.crossroade.com
`
`Primed in the united States of America.
`
`confidential Document
`
`2
`ATTORNEYS’
`EYES ONLY
`
`crossroads Systems. inc.
`
`2oMo
`
`CRDS-T 04591
`
`2 of 10
`
`
`
`verrazano Enclosure Specification
`
`Revision 21
`
`Revision History
`
`
`
`Verrazano Enclosure Specification: Table of contents
`
`1.
`
`IuuuuuuuuuuuuIIIlIlII\!lIIllIIIlDllIIlI|lUh........nu-unnusluu------------InoulullllllillIOIIIII-n-can-Inn-upllll5
`
`......
`............
`............
`1.1 Overview .......
`...........
`1.1.1 Motivation ............
`.....................
`..........
`1.1.2 Ducriprion .............................
`.......
`......
`1.1.3 Features................................
`1.1.4 Implementation Standards ......................................
`
`.....
`.....
`...........
`........
`....................5
`.........................................
`..................5
`..........
`...............
`...............
`........
`.........
`
`....................
`
`20
`
`uu-"nunuuunnnnu............ --«nunnulnn.-nun---no-uuounuuna----------------uuununnaus
`
`.....
`
`............
`
`....................6
`.........
`.........................
`.................... .... ..........
`...... ..6
`....
`..........
`...............7
`............
`...........
`......
`....................................
`...............
`...........
`........................
`....
`...........
`....
`.........
`....... 7
`.........
`..............
`................
`.....
`.................8
`.
`
`. ..
`
`
`
`2.1 Appearance ..................
`2.1.1 Color Scheme
`..........................
`2.1.2 Finish.....
`2.1.3 Interim Fmrit Bazel.....................
`2.1.4 Molded Fron1BezeI..... .....
`2.2 System i/O
`2.2.1 Panel our-outs. .......
`2.2.2
`.........
`2.8 Mechanical Features
`23.1 Air flow assumptions .....
`2.3.2 Elecimmagnoric
`.....
`........
`2.3.3 om Tap....................
`2.3.4 Rad: Mountfng..........................-.. .........
`
`................
`
`...........................
`..............................
`.........
`
`....
`.......
`
`..................
`
`.....
`
`.........
`
`......
`
`....... ..8
`
`.............9
`...........9
`
` 2.4.2 Power supply.........
`
`2.4.3 Pfintod Circuit
`
`3|
`
`DATA-lnlianlclnolbulonlnnu--u.on-uuuuunu--u-nuns--------noun-co|llllll|lllI|'IlOuuuuuuuunuc-unu1o
`
`............
`..........
`3.1 Standards ...................
`3.2 Manufacturing Drawings .. ...................
`
`.........
`......
`
`..............
`..........
`
`..................10
`..........
`.................
`.........10
`
`Oénfldomlll Document
`
`3
`ATTORNEYS’
`
`eves ONLY
`
`crossroads systems. Inc.
`
`CRDB 14938
`
`3of1O
`
`CRDS-T 04592
`
`3 of 10
`
`
`
`verrazano Enclosure Speclfloatlon
`
`‘
`
`Flevlslon 2.1
`
`Verrazana Enclosure Specification: Llst of Figures
`
`r-“ngure 1. Approximate size of enclosum. The depth is 9'. The height and width am determined
`by the panel cut-om: on the backfaoe and any cleumnco necessary for assembly. ...............5
`Figure 2.
`lntetlm bezel design. ..............................................................
`.................................... ..7
`Figure 3. Front bezel layout. Provide for a wnflgurablo company logo and product logo............. ..7
`
`Verrazano Enclosure specification: Llst of Tables
`
`conlldontlnl Document
`
`4
`
`crossroads Systems. Inc.
`
`ATTORNEYS’
`EVES ONLY
`
`CRDS 14929
`
`4of10-
`
`'
`
`CRDS-T 04593
`
`4 of 10
`
`
`
`verrezano Enclosure Specification
`
`Revision 2-1
`
`1. introduction
`Document: DS30042
`
`This document specifies the enclosure design criteria and constraints for the Verrazano
`enclosure. The verrazeno enclosure will support both the OP-1100 and the CP4200 products.
`
`1.1 Overview
`
`This section briefly describes the strategy hehind the enclosure specification. General features are
`presented to give a ‘reel’ for the design. The criteria/constraints have been revised to include
`provisions tor the cP410D. This document contains the revised enclosure requirements. and
`supersedes requirements found in previous documents.
`
`1.1.1 Motivation
`
`The Verrezano product. as defined in the Verrezano Statement of Requirements, is a stand alone
`system that provides one or two scsl parallel bus connections and e Fibre channel connection.
`it translates (bridges) the SCSI protocol between the two media types. it is a sell-contained
`system consisting of a power supply, a microprocessor. several megabytes of memory. and
`controllers for SCSI, Fibre Channel, 802.3 Ethernet. and a serial connection.
`~
`
`The system is intended tor a standard commercial environment. primarily as a ‘desktop’ model.
`Provision for a rack mount is providing through mounting hardware.
`
`The attractiveness of the desktop configuration is of prime importance. other constraints to the
`design are physical size. electromagnetic emissions limits, and heat dissipation.
`
`1 .1.2 Description
`A rough drawing or verrazano is shown in Figure 1. This is the desktop configuration. Rubber
`"feel" are placed on the bottom. The back face contains connectors and the power entry.
`in order
`tcmatcit mount the unit. the rubberfeet are removed. and the box is attached to e 2U tail rack
`is e. .
`
`
`
`Figure 1. Approximate size or enclosure. The depth is 9". The height end
`width are determined by the panel out-cute on the back teoe and any
`clearance necessary tor eeeembiy.
`
`contidentiei D content
`
`5
`
`Crossroads Systems. inc.
`
`RTTORNEYS'
`EVES ONLY
`
`CRDS 14930
`
`5of1O
`
`'
`
`(VTRDS-T 04594
`
`5 of 10
`
`
`
`Verrazano Enclosure Specification
`
`Revision 2-1
`
`1.1.3 Features
`
`Enclosure feature highlights:
`
`v
`
`-
`
`o
`
`-
`
`-
`
`;l‘he enclosure consists of a base. a cover. and a bezel. Approximate Size: 15' (w), 2
`/a‘ (hi. 9" (Ci)-
`
`The cover is painted. The cover mates with the base to form a tight "EM!" seal.
`
`The base is not finished beyond material finish. The front edge or the base is covered
`by the bezel. and the most of the rear of the enclosure is covered with labels.
`
`The bezel design Is under development.
`
`Status LEDs are on the trout to indicate operational modes. power. end lault
`conditiono
`.
`
`1.1.4 Implementation standards
`Must conform to EIA-310 rack mounting when configured for rack installation. Provision for
`rock mounting will be a modem shell that is 2U (3.51 high.
`it is assumed the shelf will be no
`more that W in height. and that clearance ol ‘/4’ is needed. therefore total height of the
`enclosure is limited to 3' maximum.
`
`2. Design Criteria
`This section summarizes the design goals.
`
`2.1 Appearance
`Design considerations:
`
`-
`
`-
`
`-
`
`-
`
`’
`
`consideration should be given as to whether the color at the front panel should
`comrast with the color of the enclosure cover or match it.
`It should also coordinate
`with the logo color.
`
`The ‘Company Name and Logo is a anap-in plate that can be customized In OEM
`applications.
`
`The ‘Model NumberINarne" is e snap-in plate that can be customized in OEM
`applications.
`-
`
`it is desirable to utilize a light pipe mechanism so that the LEDa can surface mount
`devices. located on the main board (that is. no display board is required). However.
`this can be modilled to accommodate a '1<lller" bezel design.
`
`2.1.1 color Scheme
`
`Basic scheme is off-white background (Pantone 4270). black lettering, and crossroads logo '0'
`colored in maroon (Pantone 2090).
`
`Specifically:
`
`-
`
`Box cover: Olf-white. Pantone 4270
`
`- Bezel: Background matches box cover, Pantone 4270. Lettering in black. crossroads ‘C’ in
`Pantone 209C.
`
`Confidential Document
`
`6
`ATTORNEYS '
`EYES ONLY
`
`Crossroads Systems, inc.
`
`CRDS 14931
`
`6of1O
`
`. CRDS-T 04595
`
`6 of 10
`
`
`
`verrazano Enclosure specification
`
`Revision 2.1
`
`2.1.2 Finish
`Off-white surtaces finished with medium texture.
`
`system I/0 panel, Le. the exposed metal on rear of enclosure, is not painted or finished beyond
`material finish.
`
`2.1.3 interim Front Bezel
`This panel is screen printed with e 4 color design on 0.020“ Lexsn mane finish. polycarbonate.
`is titted with an adhesive backro attach it to the front face of the enclosure base.
`it is imended
`that this bezel is an interim solution umil a molded front bezel can be incorporated into production.
`
`it
`
`The approximate bezel design is shown in Figure 2. The "CrossPoint" and LED labels are Black
`Frutiger font.
`
`CnosePom'r 4100
`
`#' IIOIIIOAII
`I
`I
`;.g.._—————».__
`
`Figure 2. Interim bezel design.
`
`2.1.4 Molded From Bezel
`ideally. the front bezel can be installed without additional fasteners. by snapping on the enclosure.
`without the use of tools.
`it fasteners are needed for mounting. they will be installed from inside
`the enclosure. Figure 2 shows the components of the from panel layout.
`it is not intend to show
`the iinl placement of the bezel components.
`
`
`
`Floure 3- From bezel llyout. Provide tor a configurable company loco Ind product logo.
`
`The CP4100 bezel can be configured for specific customers by changing the company name
`and/0' Droduct model number labels on the bezel. LEDs are located on the Verrazano PCB
`Assembly. Llghtplpes are used to make the LEDs visible from the tram panel (this avoids the use
`of an LED PCB subaesembly).
`
`If necessary. the LEDs can be moved to anywhere on the bezel with a slight design change. ‘this
`not desired. but will be considered for proposed design. It is desired that the LED holes should be
`
`Ooflfldlflflll Document
`
`7
`
`Crossroads Systems. inc.
`
`ATTORNEYS’
`EYES ONLY
`
`cans 14932
`
`7of1O
`
`_
`
`CRDS—'I' 04596
`
`7 of 10
`
`
`
`Verrezano Enclosure Specification
`
`R9Vl5'°" 2-1
`
`'pluggab|e‘. that is they can be filled it not used. however, this is not a hard requirement.
`Provision for customizing the labels should be considered.
`
`2.2 system I/O Panel
`Metal panel thickness (base): 0.050 cold rolled steel.
`
`2.2.1 Panel cut-outs
`Panel cutouts should be accommodate a vertical tolerance of .040’ and a horizontal tolerance oi‘
`.020‘.
`
`'l'he out-outs in the enclosure a
`SCSI-3 connectors: AMP 786555-7 mounted on a ‘SIB board’.
`oversized around the SCSI connectors to accommodate an assembly tolerance of .oeo'..
`GLM connector: cut-out defined in Vrtesse V8071 B1 cuGLM data sheet. page 5. GLM envelope
`defined in general in the GLM Family specification. FCSI-301. page 6.
`RJ-45/11 cutout defined bycoroom connector. Oversize panel opening by 0.030‘ vertical and
`0.020“ horizontal. Connector dimensions on page 106-107 at coroom catalog.
`The power entry out-out is defined lor the Corcom PS series power entry modules. This power
`entry module should be evaluated for ailemate sources.
`
`2.2.2 Labels
`There are tour labels on the rear. I/O panel at the enclosure.
`
`.
`
`1. The prototype enclosure shall be labeled with: ‘This device is subject to FCC rules and will
`comply with the mice prior to delivery.‘ Any advance product literature must also contain this
`statement. as the device must be tested per FOG rules prior to being oltered for sale
`(including advertising).
`2. Label for power rating. fuse size. and other lntonhation required for UL registrations. The
`labels will meet UL standards.
`
`3. A connector label for the aerial port. Ethernet port. and the Fibre Channel.
`
`4. A SCSI differential or single ended label based on the SIB card.
`
`2.3 Mechanical Features
`
`Base material: 18 gauge galvanized cold rolled steel.
`
`cover material: 20 gauge galvanized cold rolled steel.
`
`2.3.1 Air tlow assumptions
`Air intake is lrom through the tan opening in the rear of the enclosure to insure maximum fan ilte..
`Air exhaust is through the sides of the enclosure. and since the enclosure does not take up a lull
`rack width. there should be adequate airflow.
`
`2.3.2 Electromagnetic Shielding
`Enclosure top and bottom attach with a clip joint. A clip welded on the top insures a tight mating
`surlaoe.
`—
`
`A threaded stud near the power entry module is used for a connection to ground. The PCB can
`connect to chassis ground through etandotls.
`Provision for V0 liners:
`
`Confidential Document
`
`3
`
`Crossroads Systems. Inc.
`
`9TTClRNEYS'
`EYES ONLY
`
`0
`
`caps 14933
`
`some
`
`CRDS-T 04597
`
`8 of 10
`
`
`
`verrazano Enclosure Specification
`
`Revision 2.1
`
`o
`
`0
`
`The RJ modules by Coroom are available in littered versions with no change.
`
`It make be necessary to include a gasket around the
`The GLM connector is what we get.
`GLM connector. A .250 clearance around the GLM out-out is incorporated for this option.
`
`- The SCSI connectors are attached to the panel with mounting screws. Gaskets are available
`it necessary.
`
`The power entry module is available in a filtered version if necessary.
`
`2.3.3 Desk Top
`Feet are vinyl, attached with a machine screw to the enclosure.
`
`- 2.3.4 Rack Mounting
`Flack mounting is provided by a shell whose height is constrained to be '/4'.
`A standard modem shell such as Equiptds 480-119-010 provides mounting on a 19' rack.
`
`2.4 Enclosure components
`The must be a ground stud that is marked near the power entry.
`
`2.4.1 Fan
`
`Fan lite is determined by the hearing. which is determined by the crease, which depends on
`operating temperature. The slowerthe fan. the less internal heat build up.
`Panasonic FBAOSA or Globe D24-B1OA-O4W3-‘I00 or equivalent. Dimensions: 60mm square x
`Zfigimthlck. This series of fans can supply 17-23 CFM of air.
`it operates with 12V at a maximum
`of
`power.
`
`2.4.2 Power Supply
`The system components consume a maximum power of 37 watts. A 40 watt power supply is
`specified to provide an operating margin. ‘this supply can support 55 watts with forced air cooling.
`
`Voltages: 5V ® 4A.
`
`2.4.3 Printed circuit Board
`The dimensions oi the CF41 00 main printed circuit board are 8.5‘ x 7.2‘.
`The PCB is .082“ thick.
`
`2.5 Assembly considerations
`Board assembly to enclosure tolerance is assumed to be 10.010 perpendicular to V0 panel
`vertical surface.
`
`Board will be placed in enclosure base against the front. and slide towards the rear so the
`connectors protrude through the lace. The light pipes are installed alter the board is attached to
`the base. Thus. a 250' clearance is needed between the front at the board the and the front
`enclosure wall.
`
`°°"’“"""3' 9°‘-‘umlflt
`
`9
`
`Crossroads Systems. inc.
`
`ATTORNEYS’
`EYES ONLY
`
`493,,
`
`‘"9 1
`
`9of10
`
`CRDS-T 04598
`
`9 of 10
`
`
`
`Verrazano Enclosure Specification
`
`Revision 2.1
`
`3. Engine rlng Data
`
`3. 1 Standards
`Rack standard: EIA-3103.
`
`Safety: Materiais must be compatible with UL 1950 standards.
`
`3.2 Manufacturing Drawings
`Drawing documam numbers ate summarized balaw.
`
`
`
`
`
`
`
`
`°S°‘°3°
`°5°‘°32
`
`°9°7°°°
`“°9‘“‘2
`
`
`
`
`
`
`
`Confidontial Document
`
`10
`
`Crossroads Systems. Inc
`
`ATTORNEYS '
`EYES ONLY
`
`CRDS 14935
`
`10 0f1O
`
`CRDS-'1' 04599
`
`10 of 10