`571-272-7822
`
` Paper 30
`Entered: March 10, 2016
`
`UNITED STATES PATENT AND TRADEMARK OFFICE
`____________
`
`BEFORE THE PATENT TRIAL AND APPEAL BOARD
`____________
`
`FORD MOTOR COMPANY,
`Petitioner,
`
`v.
`
`PAICE LLC & THE ABELL FOUNDATION, INC.,
`Patent Owner.
`____________
`
`Case IPR2014-01415
`Patent 8,214,097 B2
`____________
`
`Before SALLY C. MEDLEY, KALYAN K. DESHPANDE, and
`CARL M. DEFRANCO, Administrative Patent Judges.
`
`DEFRANCO, Administrative Patent Judge.
`
`FINAL WRITTEN DECISION
`35 U.S.C. § 318(a) and 37 C.F.R. § 42.73
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`
`I. INTRODUCTION
`
`
`
`Paice LLC & The Abell Foundation, Inc. (collectively, “Paice”) are
`
`the owners of U.S. Patent No. 8,214,097 B2 (“the ’097 patent”). Ford Motor
`
`Company (“Ford”) filed a Petition (Paper 3, “Pet.”) for inter partes review
`
`of the ’097 patent, challenging the patentability of claims 1–6, 8–16, 18–26,
`
`28–30, and 34 under 35 U.S.C. § 103. In a preliminary proceeding, we
`
`instituted trial because Ford demonstrated a reasonable likelihood that it
`
`would prevail in proving unpatentability of the challenged claims. Once
`
`trial was instituted, Paice filed a Patent Owner Response (Paper 21, “PO
`
`Resp.”), and Ford followed with a Reply (Paper 25, “Reply”). The parties
`
`waived oral argument here, choosing instead to rely on arguments presented
`
`during a prior, consolidated hearing conducted in several related
`
`proceedings, namely, IPR2014-00570, -571, -579, -875, -884, and -904.1
`
`Pursuant to our jurisdiction under 35 U.S.C. § 6(c), we conclude that Ford
`
`has proven, by a preponderance of the evidence, that the challenged claims
`
`are unpatentable.
`
`A.
`
`Related Cases
`
`II. BACKGROUND
`
`
`
`The instant Petition challenges a claim of the ’097 patent that was
`
`adjudicated previously in IPR2014-00570 (“the -570 proceeding”), only on
`
`different grounds. Specifically, that prior proceeding led to final written
`
`decision that claim 30 is unpatentable under 35 U.S.C. § 103, along with
`
`other claims of the ’097 patent. 2015 WL 5782083 (PTAB Sept. 28, 2015).
`
`We granted institution of trial in the instant proceeding in March 2015, well
`
`before our final written decision in the -570 proceeding.
`
`
`1 Transcripts have been entered into the record in those earlier proceedings.
`
`2
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`
`
`The ’097 patent is also the subject of co-pending district court actions,
`
`including Paice, LLC v. Ford Motor Co., No. 1:14-cv-00492 (D. Md.), filed
`
`Feb. 19, 2014, and Paice LLC v. Hyundai Motor Co., No. 1:12-cv-00499
`
`(D. Md.), filed Feb. 16, 2012. Pet. 1; PO Resp. 4 (referencing the district
`
`courts’ claim constructions).
`
`B.
`
`The ’097 Patent
`
`
`
`The ’097 patent describes a hybrid vehicle with an internal
`
`combustion engine, an electric motor, and a battery bank, all controlled by a
`
`microprocessor that controls the direction of torque transfer between the
`
`engine, the motor, and the drive wheels of the vehicle. Ex. 1101, 16:61–
`
`17:5, Fig. 4. The microprocessor monitors the vehicle’s instantaneous
`
`torque requirements, also known as “road load (RL),” to determine whether
`
`the engine, the electric motor, or both, will be used to propel the vehicle. Id.
`
`at 11:50–52. Aptly, the ’097 patent describes the vehicle’s various modes of
`
`operation in terms of an engine-only mode, an all-electric mode, or a hybrid
`
`mode. Id. at 35:14–36:4, 36:39–37:22.
`
`
`
`As summarized in the ’097 patent, the microprocessor selects the
`
`appropriate mode of operation “in response to evaluation of the road load,
`
`that is, the vehicle’s instantaneous torque demands and input commands
`
`provided by the operator of the vehicle.”2 Id. at 17:16–21. “[T]he
`
`microprocessor can effectively determine the road load by monitoring the
`
`response of the vehicle to the operator’s command for more power.” Id. at
`
`36:57–64. “[T]he torque required to propel the vehicle [i.e., road load]
`
`
`2 The ’097 patent contrasts the claimed invention to prior control strategies
`“based solely on speed,” which are “incapable of responding to the
`operator’s commands, and will ultimately be unsatisfactory.” Ex. 1101,
`13:24–28.
`
`3
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`varies as indicated by the operator’s commands.” Id. at 37:23–25. For
`
`example, the microprocessor “monitors the rate at which the operator
`
`depresses pedals [for acceleration and braking] as well as the degree to
`
`which [the pedals] are depressed.” Id. at 26:59–27:4. These operator input
`
`commands are provided to the microprocessor “as an indication that an
`
`amount of torque” from the engine “will shortly be required.” Id. at 27:6–
`
`22.
`
`The microprocessor then compares the vehicle’s torque requirements
`
`against a predefined “setpoint (SP)” and uses the results of the comparison
`
`to determine the vehicle’s mode of operation. Id. at 36:39–37:21, 39:27–59.
`
`The microprocessor utilizes a hybrid control strategy that runs the engine
`
`only in a range of high fuel efficiency, such as when the torque required to
`
`drive the vehicle, or road load (RL), reaches a setpoint (SP) of
`
`approximately 30% of the engine’s maximum torque output (MTO). Id. at
`
`20:37–45, 36:39–59; see also id. at 13:48–50 (“the engine is never operated
`
`at less than 30% of MTO, and is thus never operated inefficiently”).
`
`The microprocessor also limits the rate of increase of the engine’s
`
`torque output so that combustion of fuel occurs at a substantially
`
`stoichiometric air-fuel ratio and utilizes the electric motor to meet any
`
`shortfall in torque required to operate the vehicle in response to the
`
`operator’s command. See, e.g., id. at 27:31–35, 29:63–30:12, 37:2–6,
`
`38:62–39:14. Other operating parameters may also play a role in the
`
`microprocessor’s choice of the vehicle’s mode of operation, such as the
`
`battery’s state of charge and the operator’s driving history over time. Id. at
`
`19:40–47; see also id. at 36:34–38 (“according to one aspect of the
`
`invention, the microprocessor 48 controls the vehicle’s mode of operation at
`
`4
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`any given time in dependence on ‘recent history,’ as well as on the
`
`instantaneous road load and battery charge state”). According to the ’097
`
`patent, this microprocessor control strategy maximizes fuel efficiency and
`
`reduces pollutant emissions of the hybrid vehicle. Id. at 15:38–41.
`
`
`
`C.
`
`The Challenged Claims
`
`
`
`
`
`Of the challenged claims, claims 1, 11, 21, and 30 are independent.
`
`Claim 1 is illustrative:
`
`A method for controlling a hybrid vehicle, said
`1.
`vehicle comprising a battery, a controller, wheels, an internal
`combustion engine and at least one electric motor, wherein both
`the internal combustion engine and motor are capable of
`providing torque to the wheels of said vehicle, and wherein said
`engine has an inherent maximum rate of increase of output
`torque, said method comprising the steps of:
`
`
`
`operating the internal combustion engine of the hybrid
`vehicle to provide torque to operate the vehicle;
`
`
`
`operating said at least one electric motor to provide
`additional torque when the amount of torque provided by said
`engine is less than the amount of torque required to operate the
`vehicle; and
`
`
`
`employing said controller to control the engine such that
`a rate of increase of output torque of the engine is limited to
`less than said inherent maximum rate of increase of output
`torque, and wherein said step of controlling the engine such that
`the rate of increase of output torque of the engine is limited is
`performed such that combustion of fuel within the engine
`occurs at a substantially stoichiometric ratio; and comprising
`the further steps of:
`
`
`
`operating said internal combustion engine to provide
`torque to the hybrid vehicle when the torque required to operate
`the hybrid vehicle is between a setpoint SP and a maximum
`torque output (MTO) of the engine, wherein the engine is
`operable to efficiently produce torque above SP, and wherein
`SP is substantially less than MTO;
`
`
`
`5
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`
`operating both the at least one electric motor and the
`engine to provide torque to the hybrid vehicle when the torque
`required to operate the hybrid vehicle is more than MTO; and
`
`
`
`operating the at least one electric motor to provide torque
`to the hybrid vehicle when the torque required to operate the
`hybrid vehicle is less than SP.
`
`
`
`Ex. 1101, 56:47–57:14.
`
`D.
`
`The Instituted Grounds
`
`
`
`In the preliminary proceeding, we instituted trial because Ford made a
`
`threshold showing of a “reasonable likelihood” that:
`
`(1) claims 1, 2, 5, 6, 8–12, 15, 16, 18–22, 25, 26, 28, and
`29 were unpatentable as obvious over Severinsky3 and
`Anderson4;
`
`
`
`(2) claims 3, 13, and 23 were unpatentable as obvious
`over Severinsky, Anderson, and Yamaguchi5;
`
`
`
`(3) claims 4, 14, and 24 were unpatentable as obvious
`over Severinsky, Anderson, Yamaguchi, and Takaoka6; and
`
`
`
`(4) claims 30 and 34 were unpatentable as obvious over
`Severinsky and Takaoka.
`
`
`
`Dec. to Inst. 11–12. We now decide whether Ford has proven the
`
`unpatentability of these same claims by a “preponderance of the evidence.”
`
`35 U.S.C. § 316(e).
`
`
`3 U.S. Patent No. 5,343,970, iss. Sept. 6, 1994 (Ex. 1104, “Severinsky”).
`4 C. Anderson & E. Pettit, The Effects of APU Characteristics on
`the Design of Hybrid Control Strategies for Hybrid Electric Vehicles, SAE
`TECHNICAL PAPER 950493 (1995) (Ex. 1105, “Anderson”).
`5 U.S. Patent No. 5,865,263, iss. Feb. 2, 1999 (Ex. 1106, “Yamaguchi”).
`6 T. Takaoka et al., A High-Expansion Ratio Gasoline Engine for the Toyota
`Hybrid System, TOYOTA TECHNICAL REVIEW, vol. 47, no. 2 (Apr. 1998) (Ex.
`1107, “Takaoka”).
`
`6
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`
`A.
`
`Claim Construction
`
`III. ANALYSIS
`
`
`
`In an inter partes review, claim terms in an unexpired patent are given
`
`their broadest reasonable construction in light of the specification of the
`
`patent in which they appear. 37 C.F.R. § 42.100(b). Ford proposes a
`
`construction for three claim terms, namely, “rate of change,” “setpoint,” and
`
`“road load.” Pet. 13–19. Paice takes issue with Ford’s proposed
`
`construction of “setpoint,” and is silent on the other two terms. PO Resp. 3–
`
`7. We address all three terms, beginning with the parties’ dispute over the
`
`meaning of “setpoint.”
`
`1.
`
`“Setpoint” or “SP”
`
`
`
`The term “setpoint” or “SP” is found in independent claims 1, 11, and
`
`21, as well as dependent claims 8, 18, and 34. Ford proposes that “setpoint”
`
`be construed, in the context of the claims, as a “predetermined torque value.”
`
`Pet. 15, 17. In that regard, Ford correctly notes that the claims compare the
`
`setpoint against a torque value. Id. at 15–16. For example, claims 1 and 11
`
`speak of “setpoint” or “SP” as being the lower limit at which the engine can
`
`produce torque efficiently, i.e., “when the torque required to operate the
`
`hybrid vehicle is between a setpoint (SP) and a maximum torque output
`
`(MTO) of the engine, wherein the engine is operable to efficiently produce
`
`torque above SP.”7 Ex. 1101, 57:1–6, 58:11–16 (emphases added). Claim
`
`21 similarly compares the setpoint “SP” against the torque required to propel
`
`the vehicle “RL.” Id. at 59:7–11. These express recitations suggest that
`
`
`7 Paice’s declarant, Mr. Neil Hannemann, similarly testified that under the
`“most straightforward” approach for the claimed “comparison,” the “setpoint
`is a torque value.” Ex. 1132, 79:16–80:25.
`
`7
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`“setpoint” is not just any value, but a value that—per the surrounding claim
`
`language—equates to a measure of “torque.” See Phillips v. AWH Corp.,
`
`415 F.3d 1303, 1314 (Fed. Cir. 2005) (en banc) (“[T]he claims themselves
`
`provide substantial guidance as to the meaning of particular claim terms . . .
`
`[T]he context in which a term is used in the asserted claim can be highly
`
`instructive”).
`
`
`
`Paice, on the other hand, argues that “setpoint” is synonymous with a
`
`“transition” point, not a torque value. PO Resp. 4–7. Citing the
`
`specification, Paice urges that “setpoint” must be construed to indicate a
`
`point “at which a transition between operating modes may occur.” Id. at 4,
`
`7. Paice’s argument is misplaced. Although Paice is correct that sometimes
`
`the specification describes the setpoint in terms of a “transition point” (see
`
`id. at 5), the claim language itself makes clear that setpoint relates simply to
`
`a torque value, without requiring that it be a transition point. Indeed, the
`
`specification acknowledges that the mode of operation does not always
`
`transition, or switch, at the setpoint, but instead depends on a number of
`
`parameters. For instance,
`
`the values of the sensed parameters in response to which the
`operating mode is selected may vary . . . , so that the operating
`mode is not repetitively switched simply because one of the
`sensed parameters fluctuates around a defined setpoint.
`
`
`
`Ex. 1101, 19:45–51 (emphasis added). That disclosure suggests that a
`
`transition does not spring simply from the recitation of “setpoint.” Thus, we
`
`will not import into the meaning of “setpoint” an extraneous limitation that
`
`is supported by neither the claim language nor the specification. As such,
`
`we reject Paice’s attempt to further limit the meaning of setpoint to a
`
`transition between operating modes.
`
`8
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`
`
`We also regard as meaningful that nothing in the specification
`
`precludes a setpoint from being reset, after it has been set. The specification
`
`states that the value of a setpoint may be “reset . . . in response to a repetitive
`
`driving pattern.” Ex. 1101, 39:60–63. But, just because a setpoint may be
`
`reset under certain circumstances does not foreclose it from being “set,” or
`
`“fixed,” at some point in time.8 A setpoint for however short a period of
`
`time is still a setpoint. Thus, we construe “setpoint” as a “predetermined
`
`torque value that may or may not be reset.”
`
`
`
`Finally, Paice argues that any construction limiting the meaning of
`
`setpoint to a “torque value” is inconsistent with the construction adopted by
`
`two district courts in related litigation.9 PO Resp. 4. Although, generally,
`
`we construe claim terms under a different standard than a district court, and
`
`thus, are not bound by a district court’s prior construction, Paice’s emphasis
`
`on the district court’s construction compels us to address it. See Power
`
`Integrations, Inc. v. Lee, 797 F.3d 1318, 1327 (Fed. Cir. 2015) (“Given that
`
`[patent owner’s] principal argument to the board . . . was expressly tied to
`
`the district court’s claim construction, we think that the board had an
`
`obligation, in these circumstances, to evaluate that construction”).
`
`
`
`In that regard, the district court held:
`
`there is nothing in the claims or specification that indicate a
`given setpoint value is actually represented in terms of torque.
`
`
`8 The definition of “set” is “determined . . . premeditated . . . fixed . . .
`prescribed, specified . . . built-in . . . settled.” Merriam-Webster’s Collegiate
`Dictionary (10th ed. 2000). Ex. 3001.
`9 Paice LLC v. Toyota Motor Corp., No. 2:07-cv-00180, 2008 WL 6822398
`(E.D. Tex. Dec. 5, 2008); Paice LLC v. Hyundai Motor Co., No. 1:12-cv-
`00499, 2014 WL 3725652 (D. Md. July 24, 2014).
`
`
`9
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`
`In fact, the specification clearly indicates that the state of
`charge of the battery bank, ‘expressed as a percentage of its full
`charge’ is compared against setpoints, the result of the
`comparison being used to control the mode of the vehicle.
`
`
`
`Ex. 1120, 13 (discussing “setpoint” in the context of related U.S. Patent No.
`
`7,104,347 B2). But, as discussed above, although claims are read in light of
`
`the specification, it is the use of the term “setpoint” within the context of the
`
`claims themselves that provides a firm basis for our construction. See
`
`Phillips, supra. Here, the claims instruct us that “setpoint,” when read in the
`
`context of the surrounding language, is limited to a torque value. Thus, we
`
`construe “setpoint” as representing a torque-based value.
`
`2.
`
`“Road load” or “RL”
`
`
`
`The term “road load” or “RL” appears in independent claim 21, as
`
`well as dependent claims 8, 18, and 26. Both Ford and Paice appear to agree
`
`that “road load” means the instantaneous torque required to propel the
`
`vehicle. Pet. 18–19; PO Resp. 22, 29–30. That proposed construction
`
`comports with the specification, which defines “road load” as “the vehicle’s
`
`instantaneous torque demands, i.e., that amount of torque required to propel
`
`the vehicle at a desired speed.” Ex. 1101, 12:28–32.
`
`
`
`In further defining “road load,” the specification notes that:
`
`the operator’s depressing the accelerator pedal signifies an
`increase in desired speed, i.e., an increase in road load, while
`reducing the pressure on the accelerator or depressing the brake
`pedal signifies a desired reduction in vehicle speed, indicating
`that the torque being supplied is to be reduced or should be
`negative.
`
`
`
`Id. at 12:35–41 (emphases added). As such, the specification states that road
`
`load “can be positive or negative.” Id. at 12:41–47. Thus, consistent with
`
`the specification, we construe “road load” or “RL” as “the amount of
`
`10
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`instantaneous torque required to propel the vehicle, be it positive or
`
`negative.”
`
`3.
`
`“Rate of Change”
`
`Finally, Ford asks that the term “rate of change,” found in claims 21
`
`and 30, be construed to mean “rate of increase” because that construction is
`
`consistent with an amendment that was requested during prosecution of the
`
`’097 patent, but “mistakenly failed” to get entered, even though the
`
`amendment was entered with respect to other occurrences of the “rate of
`
`change” term found elsewhere in the claims. Pet. 13–14 (citing Ex. 1103,
`
`234). Without that construction, Ford argues, the term “rate of change” in
`
`claims 21 and 30 is left with “no antecedent basis.” Id. at 14. Paice does not
`
`oppose Ford’s proposed construction, and we see merit in reconciling the
`
`“rate of change” term with applicant’s clear intention that it be “rate of
`
`increase,” as evidenced by the prosecution history. Ex. 1103, 234. Thus, we
`
`conclude that the term “rate of change” is properly construed to mean “rate
`
`of increase.”
`
`Ground 1—Claims 1, 2, 5, 6, 8–12, 15, 16, 18–22, 25, 26, 28, and
`29—Obviousness over Severinsky and Anderson
`
`Ford relies on Severinsky and Anderson as together teaching the
`
`B.
`
`
`
`limitations of independent claims 1, 11, and 21, and dependent claims 2, 5,
`
`6, and 8–10, 12, 15, 16, 18–20, 22, 25, 26, 28, and 29. Pet. 20–44. Ford
`
`also advances a reason why a skilled artisan would have combined their
`
`teachings to arrive at the claimed invention. Id. at 44–45. Specifically, like
`
`the claimed invention, Severinsky discloses the essential components of a
`
`hybrid electric vehicle, including an internal combustion engine, an electric
`
`motor, a battery, and a microprocessor for controlling operation of the
`
`11
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`engine and motor.10 Compare Ex. 1104, Fig. 3 (Severinsky) with Ex. 1101,
`
`Fig. 4 (the ’097 patent). Also, Severinsky teaches that “stoichiometric
`
`combustion” is important “[t]o lower the toxic hydrocarbon and carbon
`
`monoxide emissions” of the engine. Ex. 1104, 12:13–17.
`
`
`
`Acknowledging that Severinsky does not disclose achieving
`
`stoichiometric combustion by limiting the “rate of increase,” or “rate of
`
`change,” of the engine’s output torque, as required by independent claims 1,
`
`11, and 21, Ford relies on Anderson as teaching this limitation. Pet. 22–23
`
`(citing Ex. 1105, 7). Notably, Anderson discloses a hybrid control strategy
`
`that “maintains the stoichiometric air fuel ratio” of the engine by limiting
`
`“engine starts and transients,” and more specifically, by performing “slow
`
`transients” so the “speed of the transient” is not “too fast.”11 Ex. 1105, 7.
`
`The benefit of this strategy, according to Anderson, is that “[hydrocarbon
`
`and carbon monoxide] emissions are minimized.” Id. In combining
`
`Severinsky and Anderson, Ford submits that supplementing Severinsky’s
`
`engine control strategy with Anderson’s “slow transients” strategy would
`
`have been obvious to a skilled artisan because both references correlate
`
`“stoichiometric” combustion with minimizing carbon emissions. Pet. 44
`
`(citing Ex. 1102 ¶¶ 546–550). We agree.
`
`
`10 Ford’s declarant, Dr. Jeffrey L. Stein, whose testimony we credit,
`confirms the teachings of Severinsky with respect to the basic elements and
`functions recited by claims 1, 11, and 21, i.e., the engine, motor, battery, and
`controller. Ex. 1102 ¶¶ 128–134, 266–272, 400–406.
`11 The term “transients” is used to describe relatively short-term events
`between steady-state conditions. The engine “transients” disclosed in
`Anderson refer to the relatively rapid changes in the output torque of the
`engine due to a change in the amount of torque requested. The speed of the
`transient refers to its rate of increase over time. Ex. 1102 ¶¶ 81–83, 152.
`
`12
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`
`
`Paice, in turn, argues several points in response to Ford’s reliance on
`
`the combination of Severinsky and Anderson: first, the references fail to
`
`teach or suggest the claimed “controller” and its associated functional
`
`limitations; and, second, the references cannot be combined because
`
`Severinsky’s “parallel” hybrid control strategy “teaches away” from
`
`Anderson’s “series” hybrid control strategy. PO Resp. 2, 12–32, 37–47. We
`
`are not persuaded by Paice’s arguments.
`
`
`
`
`
`1.
`
`The Claimed “Controller”
`
`Paice starts out by arguing that Ford has failed to prove that the
`
`combination of Severinsky and Anderson discloses or suggests a controller
`
`“responsive to an operator command.” PO Resp. 15, 17, 18. This argument
`
`fails for the simple reason that none of claims 1, 11, and 21 requires that the
`
`controller be responsive to an operator command; instead, this limitation is
`
`found in claim 30, which is part of a different ground.
`
`In any event, Severinsky discloses a controller in much the same way
`
`as the challenged claims, stating that “microprocessor 48 controls the flow
`
`of torque between the motor 20, the engine 40, and the wheels 34 responsive
`
`to the mode of operation of the vehicle.” Ex. 1104, 10:27–30. Likewise,
`
`Severinsky discloses that “microprocessor 48 is provided with all
`
`information relevant to the performance of the system, and appropriately
`
`controls torque transfer unit 28, internal combustion engine 40, switching
`
`unit 28, and electric motor 20 to ensure that appropriate torque is delivered
`
`to the wheels 34 of the vehicle.” Id. at 12:64–13:2. And, although not
`
`required by claims 1, 11, and 21, Severinsky further discloses that
`
`“microprocessor 48 . . . responds to operator commands received over
`
`control line 68.” Id. at 12:60–64; see also id., Fig. 3 (depicting input of
`
`13
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`“Operator Commands” to “µP Controller 48”). Based on these explicit
`
`disclosures, we find that Severinsky teaches the “controller” limitation of the
`
`challenged claims. See Ex. 1102 ¶¶ 138–148.
`
`2.
`
`Operating the Electric Motor “To Provide Additional Torque”
`When the Engine’s Torque is Inefficient or Insufficient
`
`Paice next argues that the combination of Severinsky and Anderson
`
`
`
`
`
`does not teach “a controller that supplements engine torque with motor
`
`torque.” PO Resp. 15. According to Paice, “[t]here is no disclosure in
`
`Severinsky that the electric motor is used to provide additional torque to
`
`propel the vehicle when the rate of increase of engine output torque is
`
`limited or when the engine is operating below its capabilities.” Id. at 17
`
`(emphasis added). We disagree.
`
`As required by claims 1, 11, and 21, the controller activates the
`
`electric motor “to provide additional torque” when the torque required to
`
`propel the vehicle exceeds the amount of torque provided by the engine. Put
`
`simply, the electric motor helps the engine drive the vehicle when the engine
`
`cannot do it alone. Severinsky teaches this limitation, expressly recognizing
`
`that the “[m]icroprocessor 48 monitors the operator’s inputs and the
`
`vehicle’s performance, and activates electric motor 20 when torque in
`
`excess of the capabilities of engine 40 is required.” Ex. 1104, 14:15–18
`
`(emphasis added). For example, “[t]he electric motor . . . is used to supply
`
`additional power as needed for acceleration and hill climbing, and is used to
`
`supply all power at low speeds, where the internal combustion engine is
`
`particularly inefficient, e.g., in traffic.” Id. at 9:52–57 (emphasis added); see
`
`also id. at 10:36–38 (“[i]f the vehicle then starts to climb a hill, the motor 20
`
`is used to supplement the output torque of engine 40”). Likewise,
`
`14
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`Severinsky specifies “a highspeed acceleration and/or hill climbing mode,
`
`wherein both internal combustion engine 40 and electric motor 20 provide
`
`torque to road wheels 34.” Id. at 14:22–25 (emphasis added). Those
`
`express disclosures by Severinsky are no different than what the claims
`
`require—that the controller activate the motor “to provide additional torque”
`
`when the torque provided by the engine is insufficient to drive the vehicle.
`
`See Ex. 1102 ¶¶ 143–147, 424–430. We find that Severinsky’s teaching of
`
`supplementing the torque of the engine with that of the motor meets squarely
`
`the functional limitation of the electric motor recited by challenged claims 1,
`
`11, and 21.
`
`
`
`
`
`3.
`
`Limiting the “Rate of Increase” of the Engine’s Output Torque
`To Achieve “Substantially Stoichiometric” Combustion
`
`
`
`Ford relies on the combination of Severinsky and Anderson for
`
`teaching that the controller limits the “rate of increase” of the engine’s
`
`output torque so that fuel combustion “occurs at a substantially
`
`stoichiometric ratio,” as required by claims 1, 11, and 21. Pet. 22–24; see
`
`also Ex. 1102 ¶¶ 148–161. To begin, Severinsky teaches that the
`
`“microprocessor controller 48 controls the rate of supply of fuel to engine
`
`40.” Ex. 1104, 10:4–6. According to Ford’s declarant, Dr. Stein, that
`
`teaching by Severinsky is “one way the microprocessor 48 limits the rate of
`
`increase of output torque of the engine 40.” Ex. 1102 ¶¶ 149–150; Ex. 1129
`
`¶¶ 41–42.
`
`With that foundation in mind, Ford proffers Anderson as teaching an
`
`additional hybrid control strategy—one that actively limits the rate of
`
`increase of the engine’s output torque “by only allowing slow engine
`
`transients,” with the objective of optimizing fuel economy and reducing
`
`15
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`harmful emissions. Pet. 23, 44–45 (emphasis added). Ford then surmises
`
`that supplementing Severinsky’s microprocessor strategy, which already
`
`limits the rate of increase of the engine’s output torque by controlling the
`
`rate of fuel supply to the engine, with Anderson’s “slow transients” strategy,
`
`would have been obvious to a skilled artisan because both references are
`
`concerned with hybrid control strategies for improving fuel economy and
`
`reducing harmful emissions. Id. at 44–45 (citing Ex. 1102 ¶¶ 541–550). We
`
`find Ford’s argument persuasive.
`
`
`
`Anderson is clearly focused on a hybrid control strategy that slows
`
`engine transients in an effort to reduce the carbon emissions associated with
`
`engine combustion. For instance, in describing an optimum hybrid control
`
`strategy for the engine (or “APU”), Anderson explains that “slower
`
`transients are desirable for reducing emissions” because:
`
`[t]ransients present an emissions problem that is largely
`related to the speed of the transient. . . . If the transient is too
`fast, the engine may run rich, increasing CO and HC emissions,
`or lean, increasing NOx emissions. Some of this effect can be
`reduced using a hybrid strategy that only allows slow
`transients, but this places greater strain on the LLD [battery].12
`
`
`12 We do not find persuasive Paice’s argument that Anderson’s recognition
`of certain tradeoffs (such as strain on the battery) would have discouraged a
`skilled artisan from using her “slow transients” control strategy. See PO
`Resp. 19. Recognizing that her “slow transients” strategy comes with
`certain tradeoffs, Anderson emphasizes that “the design of an optimum
`control strategy for that [hybrid] system should be concurrent to allow
`tradeoffs to be made while the designs are still fluid. An efficient
`optimization process must involve all aspects of the system . . . from the
`beginning.” Ex. 1105, 3. And, she later recognizes that “[t]he APU control
`strategy must be robust,” despite “[t]radeoffs . . . made between engine
`complexity, cost, fuel efficiency, and battery lifetime.” Id. at 7. Thus, while
`
`16
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`
`
`
`Ex. 1105, 7 (emphasis added). That disclosure of slower engine transients
`
`suggests limiting the rate of increase of the engine’s output torque. Ex. 1102
`
`¶ 153. Importantly, Ford’s declarant, Dr. Stein, testifies that a skilled artisan
`
`“would know that slowing engine transients means slowing the rate of
`
`increase of engine output torque to something less than the [engine’s]
`
`maximum rate of increase.” Ex. 1102 ¶ 666; see also id. ¶ 154. Thus, we
`
`find that Anderson’s “slow transients” strategy would have suggested to a
`
`skilled artisan a hybrid control strategy that limits the engine’s output torque
`
`“to less than [its] inherent maximum rate of increase of output torque,” as
`
`required by claims 1, 11, and 21. Ex. 1129 ¶¶ 32, 33, 43–45.
`
`
`
`With respect to limiting the engine’s output torque to achieve
`
`combustion at “a substantially stoichiometric ratio,” Anderson explains that
`
`engine transients make it “difficult” to maintain a “stoichiometric air fuel
`
`ratio”—the ratio at which complete combustion occurs. Ex. 1105, 7. On
`
`that point, Anderson elaborates as follows:
`
`Frequently, one of the principle aims of a hybrid vehicle is to
`reduce vehicle emissions to ULEV (Ultra Low Emission
`Vehicle) levels. Consequently, APU [engine] emissions are
`very important for system success. In general, emissions are
`minimized when a stoichiometric air to fuel ratio is maintained
`by a closed loop feedback system (using an oxygen sensor for
`feedback). In some operating regimes, such as engine starts
`and transients, the stoichiometric ratio is very difficult to
`maintain resulting in an increase in emissions.
`
`
`
`Id. (emphases added).
`
`
`Anderson recognizes certain tradeoffs in the design process, nowhere does
`she discourage the use of “slow transients” in her hybrid control strategy.
`
`17
`
`FORD 1453
`
`
`
`IPR2014-01415
`Patent 8,214,097 B2
`
`
`
`As a result, to resolve this difficulty, Anderson’s control strategy
`
`“maintains the stoichiometric air fuel ratio” by purposefully slowing “the
`
`speed of the transient” so it is not “too fast.” Id. Ford’s declarant, Dr. Stein,
`
`confirms as much, testifying that Anderson’s disclosure of slower engine
`
`transients (i.e., limiting a rate of increase of the engine’s output torque)
`
`“helps the vehicle’s closed loop feedback system maintain operation near the
`
`stoichiometric air/fuel ratio, thereby reducing emissions.” Ex. 1102 ¶ 161.
`
`Dr. Stein further testifies that “the slower engine transients provide more
`
`time for the closed loop feedback system to react to sensed oxygen levels
`
`and adjust the fuel rate so that stoichiometric combustion can occur.” Id.
`
`Paice responds that Anderson’s disclosure of “slow transients” is
`
`