throbber
Gregory W. Davis, Ph.D., P.E.
`Department of Mechanical Engineering
`Kettering University
`formerly known as
`GMI Engineering & Management Institute
`1700 University Ave.
`Flint, MI 48504
`(810) 309-9886/dr.gregory.w.davis@gmail.com
`
`
`Education & Credentials
` Ph. D. in Mechanical Engineering, The University of Michigan, Ann Arbor, 1991
`Thesis: "Comprehensive Diagnostic Software for Engine Cycle Analysis"
` Master of Science in Mechanical Engineering, Oakland University, 1986
` Bachelor of Science in Mechanical Engineering, The University of Michigan, Ann Arbor,
`1982
`
` Licensed Professional Engineer in the State of Michigan, License # 35473
`
`
`Professional Experience
`Fall 1997
`Professor of Mechanical Engineering & Director-Advanced Engine Research
`to Present
`Laboratory (AERL), Kettering University. Responsibilities include leading and
`coordinating automotive engineering curriculum including faculty and graduate
`research. Teaching graduate and undergraduate mechanical engineering
`courses along with directing all research and development activities in the
`AERL. The AERL specializes in development and testing of automotive
`systems including both laboratory and on-road data acquisition & control.
`Additional responsibilities
`include developing and
`teaching Automotive
`Engineering laboratories and curriculum. Serve as faculty advisor to the SAE
`Student Branch and Clean Snowmobile Challenge where we have developed
`alternative vehicles, including extensive modifications of the Powertrain and
`Body/Chassis systems, including fuel delivery, and powertrain calibrations and
`controls. Supervised over 80 graduate and undergraduate theses in engineering.
`
`Developer & Instructor, Continuing Professional Development Programs.
`Develop & Teach continuing education short courses for industrial clients.
`Courses include, “Introduction to Heat Transfer with Applications Related to
`Vehicle Passenger Compartment Cooling,” and “Application of Fluid
`Mechanics to Vehicle Cooling Systems.”
`
`Instructor, SAE Continuing Professional Development Programs. Develop,
`Teach, and co-teach short courses in continuing professional development
`directed to automotive powertrain systems and controls, braking, handling,
`chassis, and exterior body systems for SAE at its headquarters and at company
`locations. Clients include engineers and managers from all major original
`equipment managers and suppliers, governmental regulatory agencies, and other
`professionals involved in the automotive industry world-wide.
`
`
`
`Spring 2003
`to Present
`
`
`
`Fall 2009
`to Present
`
`Page 1 of 12
`
`FORD 1444
`
`

`

`Summer 1991
`To Present
`
`Winter 1995
`to Fall 1997
`
`
`Fall 1992
`to WI 1995
`
`
`Summer 1991
`to WI 1995
`
`
`Fall 1986
`to Summer
`1991
`
`
`Winter 1988
`to Fall 1988
`
`
`Spring 1987
`to 1999
`
`Engineering Consultant. As a licensed Professional Engineer in the State of
`Michigan (35473), I am actively engaged in a variety of engineering
`consultations with both governmental and industrial clients.
`Director, Master of Automotive Engineering Program and Associate Professor,
`Mechanical Engineering Department, Lawrence Technological University.
`Coordinated and taught graduate and undergraduate mechanical engineering
`courses. Master of Automotive Engineering program accomplishments include
`a complete restructuring of the program, moving from a “lockstep” model to a
`more traditional prerequisite model to better meet the needs of students.
`Advisor for 145 graduate and undergraduate project students. Faculty advisor
`to the FutureCar Program where we developed hybrid electric and alternative
`vehicles capable of achieving dramatically higher fuel economy and lower
`emissions.
` This was accomplished through extensive Powertrain and
`Body/Chassis system modifications to an existing vehicle.
` Developed
`automated mechanical transmission (AMT) system for the hybrid electric
`powertrain. Also served as Laboratory manager for the Vehicle Dynamics
`Laboratory.
`
`Lecturer, Whiting School Evening Programs in Engineering & Applied Science,
`Johns Hopkins University. Taught mechanical engineering courses in the
`undergraduate program.
`
`Assistant Professor, Mechanical Engineering Department, United States Naval
`Academy. Coordinated and taught courses in the fluid and thermal sciences
`areas of mechanical engineering. Past Chairman (1994) of the dept. curriculum
`development committee. Laboratory manager for the Internal Combustion
`Engines and Power Systems laboratories. Faculty advisor for the USNA
`Society of Automotive Engineers (SAE). Project director for the following
`student projects: 1991-5 Hybrid Electric Vehicle (HEV) Challenge Vehicles,
`1996 Formula. The Hybrid Vehicles were developed by extensively modifying
`the Powertrain and Body/Chassis systems.
`
`Ph.D. Candidate & Graduate Asst., College of Engrg., U. of Michigan, Ann
`Arbor. Successfully defended Ph.D. dissertation (July 1991). Thesis:
`"Comprehensive Diagnostic Software for Engine Cycle Analysis". Minority
`Engineering Program Office Engineering tutor. Taught courses in Mechanical
`Engineering and mentored graduate student teaching assistants.
`
`Engineering Co-Op., Advanced Engineering, AC-Rochester Div., General
`Motors Corp. Developed IC engine models used to conduct parametric studies
`of the influence of EGR on emissions, valve timing effects, etc.
`
`Consulting Engineer & Partner, Intellec Systems, Inc. Developed computer
`software for industrial clients.
`
`Page 2 of 12
`
`FORD 1444
`
`

`

`
`Summers 1986
`to 1987
`
`
`Winter 1985
`to Spring
`1986
`
`Summer 1982
`to Winter
`1985
`
`
`Winter 1979
`to WI 1980
`
`
`Summer Intern, Advanced & Plant Engineering, AC-Rochester Div., General
`Motors Corporation. Developed computer-aided software system for a
`manufacturing plant. Developed software combustion model to predict flame
`temperature, pressure, and resultant NOx formation in a SI engine.
`
`Graduate Research Asst. with Drs. Bhatt and Wedekind, School of Engineering,
`Oakland University. Developed & utilized computer-aided data acquisition
`control and analysis software for heating system research.
`
`Associate Engineer, Production Dept., St. Clair Power Plant Detroit Edison Co.
`Responsible for operation and maintenance of two 150 MW turbo-generating
`units. Promoted to Plant Thermal Performance Engineer; duties included
`performance testing, analyzing results, and conducting monthly plant & area
`staff meetings.
`
`Engineering Technician, Testing & Evaluation Section, Motor Vehicle
`Emissions. Lab., EPA. Supervised testing, collected & analyzed data, and
`drove vehicle tests.
`
`
`Awards and Honors
`Patents
` ENERGY CONSERVATION SYSTEMS AND METHODS, Jeffrey N. Yu, James W.
`Hill, Gregory W. Davis, U.S. Patent Application 20110125294, Issued May 26, 2011,
`Notice of Allowance September 25, 2013
`
`Teaching Awards
` 2004 Outstanding Teacher Award-Kettering University,
` 1995 U. S. Naval Academy Mechanical Engineering Department Teaching Excellence
`Award,
` 1994 SAE International Ralph R. Teetor Educational Award in Recognition of
`Significant Contributions to Teaching, Research and Student Development,
` Outstanding Teaching Assistant Fellowship (U of Michigan, 1990),
` Minority Engineering Program Tutor (U of Michigan, 1990),
` Letters of Commendation from College of Engineering Dean for Excellence in Teaching
`(U of Michigan, 1990)
`
`
`Professional Society Honors
` 2009 Small Engine Technology Conference, SAE and SAE of Japan, Certificate of
`Appreciation for significant contributions at the SETC conference,
` 2006 SAE International Outstanding Section Member Award-Mid-Michigan Section in
`Recognition of Extraordinary Achievement by a Mid-Michigan Section Member,
` 2006 American Society of Mechanical Engineers (ASME) recognition of long term
`membership
` 2002 SAE International Award for Excellence in Oral Presentation- Powertrain & Fluid
`Systems Conference,
`
`Page 3 of 12
`
`FORD 1444
`
`

`

` 1994 SAE Baltimore Section Recognition of Service Award for Outstanding Leadership
`as Section Activities Chair
`
`
`Advisory Boards & Directorships
` Elected to the Society of Automotive Engineers (SAE) International Board of Directors
`(2007-2010),
` Member of the Advisory Board, National Institute for Advanced Transportation
`Technology, Center for Clean Vehicle Technology, University of Idaho-Moscow, (2007-
`Present),
` Chair, SAE International Engineering Education Board (2002-2005),
` Member, SAE International Education Board (2010-2013),
` Director, SAE International Publications Board (2005-2008)
`
`
`Professional Society Membership & Activities
`Tau Beta Pi, Pi Tau Sigma, American Society of Engineering Educators (Author and Reviewer),
`American Society of Mechanical Engineers (Author and Reviewer), Triangle Fraternity, Trustee
`and Vice-President-Triangle Fraternity Education Foundation (2001-2003), Institution of
`Mechanical Engineers (Reviewer- Journal of Automobile Engineering)
`Society of Automotive Engineers:
` SAE International Board of Directors (Director, 2007-2010);
` Education Board (Chair, 2002-2005; Member, 1994-present);
` Publications Board of Directors (Director, 2005-2008);
` Collegiate Design Series (formerly University Programs Committee) (Chair, 1998-2004,
`2011-2014; member, 1994-2009),
` SAE Faculty Advisor (1992-95, 1998-present);
` Ralph Teetor Committee (Chair-2012-present, 2004-present);
` Member of Excellence in Engineering Education Award Committee;
` Clean Snowmobile Challenge Faculty Advisor (2000-present),
` A World in Motion Program Office (Member, 2003-2009);
` Student Relations Chairman (1995-96),
` Project Director for the 1991-5 Hybrid Electric Vehicle Challenges,
` and the 1996 Formula Competition,
` FutureCar Faculty Advisor (1996-97),
` Ethanol Challenge Faculty Advisor (1998-2000),
` Technical Paper Reviewer and Session Moderator
`
`
`Professional Consulting in Engineering Legal Proceedings:
`The following list summarizes my testimony with regard to professional consulting for engineering legal
`proceedings since 2009 (last four years).
`
`
` Consulting Expert, Paul, Weiss, Rifkind, Wharton & Garrison, LLP, 2013 to Present, provided
`Deposition and Hearing testimony
`
`o Hired expert witness on behalf of Respondents Trico Corporation, Trico Products and
`Trico Components SA de CV
` Re: Certain Windshield Wiper Devices and Components Thereof, Inv. No.
`337-TA-881, before the Honorable Charles E. Bullock, Chief Administrative
`
`Page 4 of 12
`
`FORD 1444
`
`

`

`Law Judge of the United States International Trade Commission, Washington,
`D.C.
` Consulting Expert, Brooks & Kushman, P. C., 2011 to Present, provided Deposition testimony
`
`o Hired on behalf of the Defendants Corea Autoparts Producing Corporation, CAP
`America Corporation, Inc., and PIAA Corporation, USA
` CERTAIN WIPER BLADES, Investigation No. 337-TA-816, before the Honorable
`Charles E. Bullock, Chief Administrative Law Judge of the United States
`International Trade Commission, Washington, D.C.
`
` Consulting Expert, Brinks Hofer Gilson & Lione, P. C., 2013 to Present
`
`o Hired on behalf of the Defendants Snap-On Inc. and Drew Technologies, Inc.,
` Robert Bosch LLC v. Snap-On Inc. and Drew Technologies, Inc., which is
`pending in the United States District Court, Eastern District of Michigan, Civil
`Action No. 12-11503-RHC-MAR
`
` Consulting Expert, Kimley-Horn and Associates, Inc., 2011 to 2013
`
`o Hired on behalf of the Defendants in the matter of
` Gamarra v. Gibraltar Cable Barrier Systems, et al., Case Number
`502008CA027405XXXXMBAG, Palm Beach County Circuit Court
`
` Consulting Expert, Brinks Hofer Gilson & Lione, P. C., 2011
`
`o Hired on behalf of the Respondents PROGRESSIVE CASUALTY INSURANCE
`COMPANY in the matter of
`
`
`INNOVATIVE GLOBAL SYSTEMS, LLC V ONSTAR, LLC ET AL E.D.
`TEXAS, CASE NO. 6:10-CV-00574
`
` Consulting Expert, Brooks & Kushman, P. C., 2009,
`
`o Hired on behalf of the Plaintiff Magnadyne Corporation
` CERTAIN AUTOMATIVE PARTS, Consolidated Civil Actions Case No. CV 09-
`1763 AHM (VBKx), & Case No. CV09-1937 FMC (FMOx), UNITED STATES
`DISTRICT COURT, CENTRAL DISTRICT OF CALIFORNIA, WESTERN
`DIVISION
`
` Consulting Expert, Brooks & Kushman, P. C., 2008 to 2009, provided Deposition testimony
`
`o Hired on behalf of the Complainant Ford Motor Corporation
` CERTAIN AUTOMATIVE PARTS, Inv. No. 337-TA-651, before the Honorable
`Theodore R. Essex of the United States International Trade Commission,
`Washington, D.C.
`
`
`
`Selected Publications & Presentations:
`
`Technical and Text Books
` Davis, G. W., Hoff, C. J., Borton, Z., Ratcliff, M. A., “Legacy Vehicle Fuel System
`Testing with Intermediate Ethanol Blends,” National Renewable Energy Laboratory,
`Technical Report NREL/TP-5400-53606, March 2012
`
`Page 5 of 12
`
`FORD 1444
`
`

`

` Davis, G. W., “Using E85 in Vehicles,” Chapter 9, Alcoholic Fuels, CRC Press Taylor &
`Francis Group, ISBN-10 0-8493-3944-8, ISBN-13 978-0-8493-3944-8, Minteer, S.
`Editor, 2006 (Invited Chapter).
`
` Hoff, C. J., and Davis, G. W., “Introduction to Automotive Powertrains,” Kettering
`University, 2000.
`
` Davis, G. W., Editor for World Book Encyclopedia, Various Automotive Articles, 2012-
`present.
`
`
`Refereed and Reviewed Publications
` Hoff, C. J., Aurandt, J., O’Toole, M. R., and Davis, G. W., “Motivating Student Learning
`Using Biofuel-based Activities,” Paper No. AC 2013-7533, American Society of
`Engineering Educators, 2013.
`
` Hoff, C. J., Davis, G. W., and Hoff, K., “A Peer-Tutor’s Perspective On Peer-Tutoring In
`Thermodynamics,” Paper No. AC 2012-3581, American Society of Engineering
`Educators, 2012.
`
` Hoff, K., Davis, G. W., and Hoff, C. J., “A Peer-Tutor’s Perspective On Peer-Tutoring In
`Thermodynamics,” Paper No. 174, World Engineering Education Forum (WEEF), 2012.
`
` Davis, G. W., Hoff, C, J., Riffe, W.J., “Incorporating Entrepreneurship into Mechanical
`Engineering Automotive Courses: Two Case Studies,” Technical Paper No. 279,
`European Society for Engineering Education (SEFI), 1st World Engineering Education
`Flash Week, 2011.
`
` Davis, G. W., Hoff, C, J., Riffe, W.J., “Incorporating Entrepreneurship into Mechanical
`Engineering Automotive Courses: Two Case Studies,” Paper No. AC2011-2443,
`American Society of Engineering Educators, 2011.
`
` Davis, G. W., Lazorcik, G., “Development of a Flexible Fueled Snowmobile Operating
`on Ethanol Blended Gasoline for the 2010 SAE Clean Snowmobile Challenge,”
`Technical Paper No. 2010SETC-0157/2010-32-0083, Society of Automotive Engineers,
`2010.
`
` Hoff, C. J., and Davis, G. W., “The Effect of Using Ethanol-blended Gasoline on the
`Performance and Durability of Fuel Delivery Systems in Classic Automobiles,”
`Technical Paper No. 2010-01-2135, Society of Automotive Engineers, 2010.
`
` Baker, A., and Davis, G. W., “Development of the Kettering University Snowmobile for
`the 2009 SAE Clean Snowmobile Challenge,” Technical Paper No. 2009-32-0177 /
`20097177,.
`
` Davis, G. W., Wilson, F., Schickel, B., Baker, A., “Development of Clean Snowmobile
`Technology for Operation on High-Blend Ethanol for the 2008 Clean Snowmobile
`Challenge,” Technical Paper No. 08SETC-0045/2008-32-0053, Society of Automotive
`Engineers, 2008.
`
` Davis, G. W., “Demonstrating the Use of High-Blend Ethanol (E85) in Snowmobiles,”
`ES2008-54189, Proceedings of Energy Sustainability 2008, August 10-14, 2008,
`Jacksonville, Florida USA.
`
`Page 6 of 12
`
`FORD 1444
`
`

`

` Davis, G. W., and Hoff, C., “Promoting Professional Development in Undergraduate
`Engineering Using Laboratory Team Projects: A Case Study,” Proceedings of the 2008
`American Society of Engineering Educators Conference, AC 2008-2369, June, 2008.
`
` Davis, G. W., Sanger, J., Schickel B., and Muxlow J., “Development of Snowmobile
`Technology for Operation on High-Blend Ethanol,” 2007-32-0114(SAE), Society of
`Automotive Engineers, 20076614(JSAE), Japanese SAE, 2007.
`
` Davis, G. W., and Hoff, C., “Using the SAE Collegiate Design Series to Provide
`Research Opportunities for Undergraduates,” Proceedings of the 2007 American Society
`of Engineering Educators Conference, 2007-2879, June, 2007.
`
` Swartz, C., et al, Davis, G. W.,” Development of Clean Snowmobile Technology for the
`2006 SAE Clean Snowmobile Challenge,” Paper No. 2006-32-0051, Society of
`Automotive Engineers, 2006.
`
` Davis, G. W., Grobelny, A. E., and Stimpson, J. C., “Testing of a Conventional Two-
`Stroke Snowmobile Engine using Ethanol-Blended Fuels,” 4rd Annual International
`Energy Conversion Engineering Conference, AIAA-2006-62923, June, 2006.
`
` Hoff, C., and Davis, G. W., “Using the SAE Collegiate Design Series to Provide Hands-
`on Team Project Experience for Undergraduates,” Proceedings of the 2006 American
`Society of Engineering Educators Conference, 2006-2130, June, 2006.
`
` Carrick, N., Davis, G. W., Warchuck, D., Block, C., and Maurer, J., “Development of
`Clean Snowmobile Technology for the 2005 SAE Clean Snowmobile Challenge,” SAE
`Powertrain and Fluids Conference, Paper No. 05FFL-131, SAE, October, 2005.
`
` Davis, G. W., and Pilger, C., “Effect of Biomass-based Lubricants on the Performance
`and Emissions of a Two-Stroke Snowmobile Engine,” 3rd Annual International Energy
`Conversion Engineering Conference, AIAA-2005-5508, August, 2005.
`
` Hoff, Craig J., and Davis, G. W., “The Integration of Hands-on Team Projects into an
`Engineering Course to Help Students Make the Transition from Student to Professional
`Engineer,” Proceedings of the 2005 American Society of Engineering Educators
`Conference, 2005-2130, June, 2005.
`
` Block, C., Carrick, N., Maurer, J., Davis, G. W., and Hoff, C. J., “The Development of a
`Clean Snowmobile for the 2004 SAE Clean Snowmobile Challenge,” SAE Small Engine
`Technology Conference, SAE, 04SETC-83, September 27-30, 2004.
`
` Davis, G. W., and Pilger, C., “Effect of Biomass-based Fuels and Lubricants on
`Snowmobiles,” Proceedings of IECEC ‘04 International Energy Conversion Engineering
`Conference, AIAA-2004-5681, August 16-19, 2004.
`
` Davis, G. W., “Modifications of the SR-30 Gas Turbine Experimental Apparatus to
`Improve Data Accuracy,” Proceedings of the 2004 ASEE Annual Conference, 2004-
`1385, Salt Lake City, UT, June 20-23, 2004.
`
` Carrick, N., Kampman, E., Davis, G. W., “Kettering University’s 2003 Design for the
`Clean Snowmobile Challenge,” SAE Small Engine Technology Conference, 03SETC-88,
`September, 2003.
`
`Page 7 of 12
`
`FORD 1444
`
`

`

` Davis, G. W., “Reduction In Snowmobile Emissions When Using High Blend Alcohol
`(E-85) Fuel,” Proceedings of IECEC ‘03 International Energy Conversion Engineering
`Conference, AIAA-2003-6025, August, 2003.
`
` Taylor, J., Davis, G. W., "The Design and Implementation of Kettering University’s
`Entry into the 2001 Clean Snowmobile Challenge." SAE Spring Fuels and Lubrication
`Conference, Reno, NV, May 6, 2002.
`
` Davis, G. W., "Using Hydrogen Reformation of E85 Fuel to Improve the Cold-Start
`Performance of an Engine," Proceedings of the 2002 Global Powertrain Congress, Ann
`Arbor, MI, 2002.
`
` Kampman, E., Davis, G. W., Taylor, J., Schwulst, K., “Kettering University’s Design of
`an Automotive Based Four-Stroke Powered Clean Snowmobile,” Published in the SAE
`2002 Transactions-Journal of Engines, also SAE Technical Publication 2002- 01-2757,
`and reprinted in SAE Special Publication, SP-1726, 2002.
`
` Davis, G. W., "The Determination Of Minimum Levels Of Hydrogen Supplementation
`To Produce Acceptable Cold Start Performance Of Engines Using A High-Blend Ethanol
`Fuel," Proceedings of the 37th Intersociety Energy Conversion Engineering Conference,
`Washington, D.C., July 31, ISBN 0-7803-7296-4, 2002.
`
` Davis, G. W., Wu, J., Heil, E. T., "The Development of a Partial Oxidation Hydrogen
`Reformer for Improved Cold Start on an E85 Fueled Engine,” Proceedings of the 2001
`Global Powertrain Congress, Detroit MI, 2001.
`
` Heil, E. T., Davis, G. W., Wu, J., "Determination Of The Concentration Of Hydrogen
`Produced Using A Cold Start Partial Oxidation Hydrogen Reformer For An E85 Fueled
`Engine," Proceedings of IECEC ‘01 36th Intersociety Energy Conversion Engineering
`Conference, Savannah, Georgia, IECEC2001-ES-38, 2001.
`
` Schwulst, K., Heil, E., Taylor, J., Davis, G. W., "The Design and Implementation of
`Kettering University’s Entry into the 2001 Clean Snowmobile Challenge." SAE
`Technical Publication, 2001-01-3654, reprinted in SAE Clean Snowmobile Challenge
`2001, SAE Special Publication SP-1649, 2001.
`
` Davis, G. W., Heil, E. T., “The Development and Performance of a High Blend Ethanol
`Fueled Vehicle,” Proceedings Paper No. 2000-01-1602, 2000 FutureCar Congress,
`Arlington VA, 2000.
`
` Davis, G. W., Heil, E. T., “The Near-Term Use of Hydrogen in Internal Combustion
`Engines,” Invited Paper, Proceedings of the 2000 Global Powertrain Congress, Detroit
`MI, 2000.
`
` Davis, G. W., Singh, S., Heil, E. T., “Hydrogen Supplemented E85 For Cold Start
`Improvement,” Proceedings of the 2000 Global Powertrain Congress, Detroit MI, 2000.
`
` Davis, G. W., Heil, E. T., Rust, R., “Ethanol Vehicle Cold Start Improvement When
`Using A Hydrogen Supplemented E85 Fuel,” Proceedings paper No. AIAA-2000-2849,
`35th Intersociety Energy Conversion Engineering Conference, 2000.
`
` Calabrese, J. L., Patchett, J. A., Davis, G. W., Grimston, K., Rice, G. W., “The Influence
`Of Injector Operating Conditions On The Performance Of A Urea – Water Selective
`
`Page 8 of 12
`
`FORD 1444
`
`

`

`Catalytic Reduction (SCR) System,” SAE Technical Publication, 2000-01-2814, re-
`printed in Diesel Aftertreatment, SAE Special Publication SP-1561, 2000.
`
` Davis, G. W., et al, "The Determination of Air/Fuel Ratio Differences Between Cylinders
`in a Production Engine Using Exhaust Gas Oxygen Sensors," SAE Technical Paper 1999-
`01-1170, reprinted in Electronic Engine Controls 1999: Sensors, Actuators, and
`Development Tools, SAE Special Publication SP-1418, 1999.
`
` Davis, G. W., et al, "The Effect of Multiple Spark Discharge on the Cold-Startability of
`an E85 Fueled Vehicle," SAE Technical Paper 1999-01-0609, 1999.
`
` Davis, G. W., et al, "The Effect of a Multiple Spark Discharge Ignition System and Spark
`Plug Electrode Configuration on Cold Starting of a Dedicated E85 Fueled Vehicle,"
`Technical Paper 1999-01-2664, Proceedings, 34th Intersociety Energy Conversion
`Engineering Conference, 1999.
`
` Davis, G. W., et al, "The Effect of SparkPlug Electrode Geometry and Choice of Ignition
`System on the Cold Start Ability of a Dedicated E85 Fueled Vehicle," Proceedings, 1999
`Global Powertrain Conference, 1999.
`
` Davis, G. W., "The Development of an Electro-Hydraulically Controlled, Five-Speed
`Transmission for a Hybrid Electric Vehicle,” SAE Technical Publication 980830, 1998.
`
` Davis, G. W., "The Development of an Electro-Hydraulically Controlled, Five-Speed
`Transmission for a Hybrid Electric Vehicle,” SAE Transactions – Journal of Passenger
`Cars, 1998.
`
` Davis, G. W., and Hoff, C. J., "The Design of an Electro-Hydraulically Controlled,
`Manual Transmission for a Hybrid Electric Vehicle,” 33rd Intersociety Energy
`Conversion Engineering Conference, IECEC-98-077, 1998.
`
` Davis, G. W., and Hoff, C. J., "Evaluation of an Electro-Hydraulically Controlled,
`Manual Transmission for a Hybrid Electric Vehicle,” 1998 Global Powertrain Congress,
`Proceedings, 1998.
`
` Davis, G. W., and Madeka, F. C., "The Effect of Regenerative Braking on the
`Performance and Range of the AMPhibian II Hybrid Electric Vehicle,” SAE Technical
`Publication 950957, re-printed in SAE Publication SP-1089, 1995.
`
` Davis, G. W., Hodges, G. L., and Madeka, F. C., "The Development and Performance of
`the AMPhibian Hybrid Electric Vehicle,” SAE Technical Publication 940337, 1994.
`
` Madeka, F. C., Davis, G. W., and Hodges, G. L., "The Selection of Lead-Acid Batteries
`for use in Hybrid Electric Vehicles,” SAE Technical Publication 940338, 1994.
`
` Davis, G. W., "The Effect of a Regenerative Braking System in the AMPhibian Hybrid
`Electric Vehicle,” 29th Intersociety Energy Conversion Engineering Conference, AIAA-
`94-4225-CP., 1994.
`
` Davis, G. W., Hodges, G. L., and Madeka, F. C., "The Development of a Series Hybrid
`Electric Vehicle for Near-Term Applications,” 28th Intersociety Energy Conversion
`Engineering Conference, Volume 2, 1993.
`
`
`
`Page 9 of 12
`
`FORD 1444
`
`

`

`Other Technical Publications
`
` Davis, G. W., Spohn, B., Maninger, M., Schaefer, E., and Heil, E. T., ”Development of
`an E85 Fueled Light Duty Truck,” technical paper in 2000 Ethanol Vehicle Challenge,
`SAE Special Publication SP-1618, 2001.
`
` Davis, G. W., “ETHANOL, Fueling America's Future!,” Brochure distributed at vehicle
`displays, 1999.
`
` Davis, G. W., et al, "The Kettering University Ethanol Challenge Vehicle,” 1999 SAE
`Congress, technical paper in 1998 Ethanol Vehicle Challenge, SAE Special Publication
`SP-1453, 1999.
`
` Davis, G. W., “ETHANOL, Fueling America's Future!,” Brochure distributed at vehicle
`displays, 1999.
`
` Davis, G. W., The Lawrence Technological University FutureCar Team, "Design and
`Development of Hyades, a Parallel Hybrid Electric Vehicle for the 1997 FutureCar
`Challenge,” technical paper in 1997 FutureCar Challenge, SAE Special Publication SP-
`1359, 1998.
`
` The Lawrence Technological University FutureCar Team, and Davis, G. W., "The
`Development of Hyades, a Parallel Hybrid Electric Vehicle for the 1996 FutureCar
`Challenge,” technical paper in 1996 FutureCar Challenge, SAE Special Publication SP-
`1234, 1997.
`
` Madeka, F. C., and Davis, G. W., "The Performance of a Dual Fueled, Series Drive,
`Hybrid Electric Vehicle Operating on CNG or Gasoline,” Prepared for 1996 SAE
`Congress, 1996.
`
` Madeka, F. C., Hodges, G. L., and Davis, G. W., "AMPhibian Evolution: The 1994
`United States Naval Academy Hybrid Electric Vehicle,” SAE SP-1103, 1995.
`
` Davis, G. W., Hodges, G. L., and Madeka, F. C., "The Development of the United States
`Naval Academy Hybrid Electric Vehicle: AMPhibian,” SAE Special Publication, 1994.
`
` Davis, G. W., Hodges, G. L., and Madeka, F. C., "The Development of a Series Hybrid
`Electric Vehicle for Near-Term Applications,” IEEE Aerospace and Electronics Systems
`Magazine (cover article), November 1993.
`
`
`
`Invited Presentations
`
` Davis, G. W., “What is the future for Collegiate Design Competitions in a Multi-
`Discipline, Diverse World?,” SAE 2013 World Congress & Exhibition, Engineering
`Education (B600) Session, Invited presentation, SAE International, Detroit, MI, April,
`2013.
`
` Davis, G. W., “Development of Kettering University’s Clean Snowmobile for High-
`Blend Ethanol Fuels,” Invited Lecture, State of Michigan Ethanol Coalition of Michigan,
`Lansing, MI, September 24, 2003.
`
`
`
`Page 10 of 12
`
`FORD 1444
`
`

`

`Select Conference Presentations
`
`
` Thompson, B., Grabo, K., and Davis, G. W., “Development of a Flexible Fueled
`Snowmobile Operating on Ethanol Blended Gasoline for the 2010 SAE Clean
`Snowmobile Challenge,” Small Engine Technology Conference, Society of Automotive
`Engineers, Linz, Austria, September 26-30, 2010.
`
` Hoff, C. J., and Davis, G. W., “The Effect of Using Ethanol-blended Gasoline on the
`Performance and Durability of Fuel Delivery Systems in Classic Automobiles,”
`Powertrain Technology Conference, Society of Automotive Engineers, San Diego CA,
`October 24-27, 2010.
`
` Baker, A., and Davis, G. W., “Development of the Kettering University Snowmobile for
`the 2009 SAE Clean Snowmobile Challenge,” Small Engine Technology Conference,
`Society of Automotive Engineers, Penang, Malaysia, Nov. 2-5, 2009.
`
` Klieman, Ross, Davis, G. W., A. “Development of Clean Snowmobile Technology for
`Operation on High-Blend Ethanol for the 2008 Clean Snowmobile Challenge,” Small
`Engine Technology Conference, Society of Automotive Engineers, Milwaukee WI, Sep, 9-
`11, 2008.
`
` Davis, G. W., “Demonstrating the Use of High-Blend Ethanol (E85) in Snowmobiles,”
`ES2008-54189, Energy Sustainability 2008, ASME, August 10-14, 2008, Jacksonville,
`Florida USA.
`
` Schickel B., Sanger, J., and Davis, G. W., “Development of Snowmobile Technology for
`Operation on High-Blend Ethanol,” Small Engine Technology Conference, Japan, 2007.
`
` Davis, G. W., “Using BioDiesel Blended Fuels in Un-Modified On-Road Vehicles,”
`Alternative Fuels & Vehicles National Conference + Expo, Anaheim, Ca., April 2, 2007.
`
` Sanger, J., Davis, G. W.,” Development of Clean Snowmobile Technology for the 2006
`SAE Clean Snowmobile Challenge,” , SAE Small Engine Technology Conference, Paper
`No. 2006-32-0051, Society of Automotive Engineers, November, 2006.
`
` Grobelny, A. E., and Davis, G. W., “Testing of a Conventional Two-Stroke Snowmobile
`Engine using Ethanol-Blended Fuels,” 4rd Annual International Energy Conversion
`Engineering Conference, June, 2006.
`
` Swartz, C. and Davis, G. W., “Development of Clean Snowmobile Technology for the
`2005 SAE Clean Snowmobile Challenge,” SAE Powertrain and Fluids Conference, Paper
`No. 05FFL-131, SAE, October, 2005.
`
` Pilger, C., and Davis, G. W., “Effect of Biomass-based Lubricants on the Performance
`and Emissions of a Two-Stroke Snowmobile Engine,” 3rd Annual International Energy
`Conversion Engineering Conference, AIAA-2005-5508, August, 2005
`
` Davis, G. W., and Pilger, C., “Effect of Biomass-based Fuels and Lubricants on
`Snowmobiles,” IECEC ‘04 International Energy Conversion Engineering Conference,
`AIAA-2004-5681, August 18, 2004.
`
`Page 11 of 12
`
`FORD 1444
`
`

`

` Carrick, N., and Davis, G. W., “Kettering University’s 2003 Design for the Clean
`Snowmobile Challenge,” SAE Small Engine Technology Conference, 03SETC-88,
`September, 2003.
`
`
`Conference Session Organization/Moderation
`
` Session Co-Chair, “Materials”, Small Engine Technology Conference, Society of
`Automotive Engineers, Linz, Austria, September 26-30, 2010.
`
` Session Co-Chair, Small Engine Technology Conference, Society of Automotive
`Engineers, Penang, Malaysia, Nov. 2-5, 2009.
`
` Panel Member, “Small Fry: Future Prospects for Light-Duty Biodiesel,” Alternative
`Fuels & Vehicles National Conference + Expo, Anaheim, Ca., April 2, 2007.
` Session Chair, “Novel Energy Conversion Systems,” 55-FREPS-9, 3rd Annual
`International Energy Conversion Engineering Conference, August, 2005.
`
` Panel Member, “Advancing the Choice 2005: Current Issues in Alternative Fuels,”
`Greater Lansing Area Clean Cities, Lansing, MI, Apr. 2, 2005.
`
` Panel Member, “Fuel Cells, Today and Tomorrow,” National Alternative Fueled Vehicle
`(AFV) Day Odyssey, Lansing, MI, Apr. 2, 2004.
`
` Panel Member, “The Impact of Feedstock Fuels,” National Alternative Fueled Vehicle
`(AFV) Day Odyssey, Lansing, MI, Apr. 2, 2004.
`
` Panel Member, “Technology Forum: The Future Of Fuel Cells,” Sponsored by the
`Central Michigan Research Alliance (CMRA), December 4, 2003.
`
`
`
`
`
`
`Page 12 of 12
`
`FORD 1444
`
`

This document is available on Docket Alarm but you must sign up to view it.


Or .

Accessing this document will incur an additional charge of $.

After purchase, you can access this document again without charge.

Accept $ Charge
throbber

Still Working On It

This document is taking longer than usual to download. This can happen if we need to contact the court directly to obtain the document and their servers are running slowly.

Give it another minute or two to complete, and then try the refresh button.

throbber

A few More Minutes ... Still Working

It can take up to 5 minutes for us to download a document if the court servers are running slowly.

Thank you for your continued patience.

This document could not be displayed.

We could not find this document within its docket. Please go back to the docket page and check the link. If that does not work, go back to the docket and refresh it to pull the newest information.

Your account does not support viewing this document.

You need a Paid Account to view this document. Click here to change your account type.

Your account does not support viewing this document.

Set your membership status to view this document.

With a Docket Alarm membership, you'll get a whole lot more, including:

  • Up-to-date information for this case.
  • Email alerts whenever there is an update.
  • Full text search for other cases.
  • Get email alerts whenever a new case matches your search.

Become a Member

One Moment Please

The filing “” is large (MB) and is being downloaded.

Please refresh this page in a few minutes to see if the filing has been downloaded. The filing will also be emailed to you when the download completes.

Your document is on its way!

If you do not receive the document in five minutes, contact support at support@docketalarm.com.

Sealed Document

We are unable to display this document, it may be under a court ordered seal.

If you have proper credentials to access the file, you may proceed directly to the court's system using your government issued username and password.


Access Government Site

We are redirecting you
to a mobile optimized page.





Document Unreadable or Corrupt

Refresh this Document
Go to the Docket

We are unable to display this document.

Refresh this Document
Go to the Docket