`
`
`EXHIBIT 2128EXHIBIT 2128EXHIBIT 2128
`
`
`
`
`
`RE: Cristie Projection Lens
`
`From:
`Lenny Lipton <"/o=reald/ou=first administrative group/cn=recipients/cn=llipton">
`To:
`Jerry Carollo <jcarollo@creativedis.com>, Matt Cowan <mcowan@reald.com>
`Cc:
`Mahir Abrahim <mabrahim@creativedis.com>, Michael Hoppe <mhoppe@creativedis.com>, Ying-Moh
`Liu <yml7245@yahoo.com>
`Date:
`Tue, 12 Sep 2006 08:36:00 -0700
`
`OK -- so what lens do we need? If we have something in inventory
`that's the way to go -- I need to know which.
`
`
`Also -- what theater are we going to test this in? If it's the Clarity we
`want to fill the screen.
`
`From: Jerry Carollo [mailto:JCarollo@creativedis.com]
`Sent: Tuesday, September 12, 2006 8:28 AM
`To: Matt Cowan; Lenny Lipton
`Cc: Mahir Abrahim; Michael Hoppe; Ying-Moh Liu
`Subject: RE: Cristie Projection Lens
`
`All:
`
`
`We have no issue cutting the lens. So let us know. We’ll get back to you on the geometry.
`
`jerry
`
`
`From: Matt Cowan [mailto:mcowan@reald.com]
`Sent: Tuesday, September 12, 2006 8:14 AM
`To: Jerry Carollo; Lenny Lipton
`Cc: Mahir Abrahim; Michael Hoppe; Ying-Moh Liu
`Subject: RE: Cristie Projection Lens
`
`
`I believe we have an inventory of a few lenses - check with Drew. This is a proof of concept - we need to
`do wht it takes to make itr work. I recommenf that we just cut the lens. I suspect that Jerry could do a
`better job at this than we could.
`
`Based on geometries we should be using the 1.8 to 2.4 lens (from memory - I'm on the road...). I believe
`that this lens touches the eidesr angle in our current spec.
`
`If we need the lens nipped off in production I'm sure we can work something.
`
`Jerry - can you confirm the lens ratio?
`
`Matt.
`
`
`
`
`
`
`REALD INC.
`Exhibit 2128-1
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
` -----Original Message-----
`From: Jerry Carollo [mailto:JCarollo@creativedis.com]
`Sent: Tue Sep 12 08:02:23 2006
`To: Lenny Lipton
`Cc: Mahir Abrahim; Michael Hoppe; Ying-Moh Liu; Matt Cowan
`Subject: RE: Cristie Projection Lens
`
`Lenny:
`
`
`
`For the demonstration system we need it cut down - or select and other
`lens. We can do this but it may be better for Real D to perform this
`operation.
`
`
`
`Jerry
`
`
`
`________________________________
`
`From: Lenny Lipton [mailto:llipton@reald.com]
`Sent: Monday, September 11, 2006 5:52 PM
`To: Jerry Carollo
`Cc: Mahir Abrahim; Michael Hoppe; Ying-Moh Liu; Matt Cowan
`Subject: RE: Cristie Projection Lens
`
`
`
`Jerry,
`
`
`
`We don't know enough about other Konica-Minolta lenses in the series.
`Some of them do not have the front element recessed very much and some
`do.
`
`
`
`
`
`We need that infomration.
`
`Are you saying that Real D should supply you with the lens mount cut?
`Or are you asking if it should be cut at all?
`
`
`
`It has to be cut for the demonstrator but I am wondering about the
`product and what the configuration will be for that -- for various
`lenses. Which lenses are most likely to be used? Will we offer a
`lens/BPS combo. Seems like we have to to make this thing work -- that
`means that the design may be restricted to some focal lengths.
`
`
`REALD INC.
`Exhibit 2128-2
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`
`
`
`
`I'll have to find out about this.
`
`________________________________
`
`From: Jerry Carollo [mailto:JCarollo@creativedis.com]
`Sent: Mon 9/11/2006 4:21 PM
`To: Lenny Lipton
`Cc: Mahir Abrahim; Michael Hoppe; Ying-Moh Liu
`Subject: Cristie Projection Lens
`
`Lenny:
`
`
`
`We really need to have Real D "cut" off the subject lens shroud. The
`lens is recessed 1.5". If we do not it will make the system too large
`and the polarizer we are using is too small or will vignette the full
`field. Please clarify. At this time we are assuming that is will be
`cut for this demonstrator.
`
`
`
`Jerry Carollo
`
`President/CEO
`5909 Sea Lion Pl. Suite A
`Carlsbad, CA 92010
`(w) 760.476.0339 x202
`(f) 760.476.0620
`(c) 760.889.2875
`
`
`
`************************************************************************
`***********************
`This email and any files transmitted with it are confidential and
`intended solely
`for the use of the individual or entity to whom they are addressed and
`may
`contain confidential and privileged information. No one else is
`authorized to
`distribute, forward, print, copy or act upon any information contained
`in this email.
`If you are not the intended recipient, please contact the sender by
`reply email
`and destroy all copies of the original message.
`************************************************************************
`************************
`
`REALD INC.
`Exhibit 2128-3
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
Accessing this document will incur an additional charge of $.
After purchase, you can access this document again without charge.
Accept $ Charge
Still Working On It
This document is taking longer than usual to download. This can happen if we need to contact the court directly to obtain the document and their servers are running slowly.
Give it another minute or two to complete, and then try the refresh button.
A few More Minutes ... Still Working
It can take up to 5 minutes for us to download a document if the court servers are running slowly.
Thank you for your continued patience.
This document could not be displayed.
We could not find this document within its docket. Please go back to the docket page and check the link. If that does not work, go back to the docket and refresh it to pull the newest information.
Your account does not support viewing this document.
You need a Paid Account to view this document. Click here to change your account type.
Your account does not support viewing this document.
Set your membership
status to view this document.
With a Docket Alarm membership, you'll
get a whole lot more, including:
- Up-to-date information for this case.
- Email alerts whenever there is an update.
- Full text search for other cases.
- Get email alerts whenever a new case matches your search.
One Moment Please
The filing “” is large (MB) and is being downloaded.
Please refresh this page in a few minutes to see if the filing has been downloaded. The filing will also be emailed to you when the download completes.
Your document is on its way!
If you do not receive the document in five minutes, contact support at support@docketalarm.com.
Sealed Document
We are unable to display this document, it may be under a court ordered seal.
If you have proper credentials to access the file, you may proceed directly to the court's system using your government issued username and password.
Access Government Site
