`EXHIBIT 2082
`
`
`
`
`
`From:
`Sent:
`To:
`Subject:
`
`Ying-Moh Liu <yml7245@yahoo.com>
`Monday, June 29, 2015 11:07 PM
`McCormack, Brian C
`Fw: Nitto HWF tests
`
`
`----- Forwarded Message -----
`From: Tom Carter <TCarter@creativedis.com>
`To: Ying-Moh Liu <yml7245@yahoo.com>
`Cc: Mahir Abrahim <MAbrahim@creativedis.com>
`Sent: Monday, October 16, 2006 9:50 AM
`Subject: RE: Nitto HWF tests
`
`Ying-Moh,
`
`I am going to pick up an RS-232 connector today at Fry’s. I hope to have the software and 705 talking by the end of
`today. We have located a light source which I think should work fine. It turns out that we actually had this source and
`collimating lens. We have, however, misplaced the fiber light pipe. I will be purchasing it today. My test plan ENB will be
`done tomorrow, perhaps you can give it a once over, specifically the Procedure section.
`
`
`Regarding the Z-screen, I appreciate the operating instructions but is it really necessary to use an alternating
`current? The liquid crystal should work just fine with a constant voltage. If it does need to be AC how will this affect the
`measurement? Do we need to get a chopper? Reviewing my notes, I see that the Z-screen test was left somewhat open
`with respect to procedure. Alternatively, I forgot to write the info down and the beer I had this weekend destroyed those
`brain cells which were grasping at that knowledge.
`
`
`Anyway I’ll give you a call about the Z-screen later on this week. I hope to have this testing completed by weeks end.
`
`-Tom
`
`
`
`From: Ying-Moh Liu [mailto:yml7245@yahoo.com]
`Sent: Friday, October 13, 2006 3:38 PM
`To: Tom Carter
`Subject: RE: Nitto HWF tests
`
`
`The main reason is to improve the signal to noise ratio with filtered white light. However, you are right, we
`might get good enough data without filters. So, let's start the experiments with unfiltered white light.
`
`
`How is PR-705 connection to PC with the RS-232 going?
`
`
`Ying-Moh
`
`Tom Carter <TCarter@creativedis.com> wrote:
`Good Afternoon Ying-Moh,
`
`
`Regarding our test set up. I am curious as to the reason you suggested using color filters in conjunction
`with the Spectroradiometer.
`
`-Tom
`
`1
`
`REALD INC.
`Exhibit 2082-1
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`
`
`
`Stay in the know. Pulse on the new Yahoo.com. Check it out.
`
`
`2
`
`REALD INC.
`Exhibit 2082-2
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035