EXHIBIT 2075
`EXHIBIT 2075
`
`
`
`

`
`From:
`Sent:
`To:
`Subject:
`
`Ying-Moh Liu <yml7245@yahoo.com>
`Saturday, June 27, 2015 6:42 PM
`McCormack, Brian C
`Fw: RFQ EML 06-1009 (Drawing Number 105-1012 Rev 2 with
`exceptions/modifications)
`
`
`----- Forwarded Message -----
`From: Ying-Moh Liu <yml7245@yahoo.com>
`To: Jerry Carollo <JCarollo@creativedis.com>
`Cc: Tom Carter <TCarter@creativedis.com>
`Sent: Wednesday, October 11, 2006 4:01 PM
`Subject: RE: RFQ EML 06-1009 (Drawing Number 105-1012 Rev 2 with exceptions/modifications)
`
`Jerry and Tom:
`
`It may be a good idea for me to come tomorrow at noon to go over the tests. Please let me know if it
`is OK and if you are convenient.
`
`
`Ying-Moh
`
`Jerry Carollo <JCarollo@creativedis.com> wrote:
`Sure, get involved as you see fit.
`
`
`
`
` J
`
`
`
`From: Ying-Moh Liu [mailto:yml7245@yahoo.com]
`Sent: Wednesday, October 11, 2006 10:26 AM
`To: Jerry Carollo; Mahir Abrahim
`Cc: Tom Carter; Michael Hoppe
`Subject: RE: RFQ EML 06-1009 (Drawing Number 105-1012 Rev 2 with exceptions/modifications)
`
`
`Jerry:
`
`I understand you want Tom to do the tests and I would be happy to help on the side. I would suggest
`that we think about the few configurations that we want to characterize, e.g., the film between crossed
`polarizers and the film with the Z-screen, etc. The angular properties are of interests as well. These
`measurements will help our understanding of on-screen performance of our module.
`
`
`Ying-Moh
`
`Jerry Carollo <JCarollo@creativedis.com> wrote:
`Guys:
`
`I recommend Tom do the test.
`
`
`
`
` J
`
`1
`
`REALD INC.
`Exhibit 2075-1
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`

`
`
`
`From: Mahir Abrahim
`Sent: Wednesday, October 11, 2006 9:13 AM
`To: Ying-Moh Liu
`Cc: Tom Carter; Michael Hoppe; Jerry Carollo
`Subject: RE: RFQ EML 06-1009 (Drawing Number 105-1012 Rev 2 with exceptions/modifications)
`
`
`Ying-Moh,
`
`I¡¦m not familiar with optical validation tests. Would you mind coming to do the testing? Either that or
`Tom could take a look at them if he¡¦s not busy.
`
`-Mahir
`
`
`
`
`From: Ying-Moh Liu [mailto:yml7245@yahoo.com]
`Sent: Tuesday, October 10, 2006 9:36 AM
`To: Mahir Abrahim ; Jerry Carollo ; Michael Hoppe
`Cc: David Lynch ; Bill Maffucci
`Subject: RE: RFQ EML 06-1009 (Drawing Number 105-1012 Rev 2 with exceptions/modifications)
`
`It may be useful to test the Nitto HWF in between two crossed polarizers and backlit with
`filtered white light to see its chromatic leakage. A silicon detector with a collection lens can be
`used to quantify it.
`
`
`Ying-Moh
`
`Mahir Abrahim <MAbrahim@creativedis.com> wrote:
`I just received the Nitto half-wave films. I will put them with the Nitto polarizing films that RealD
`sent us.
`
`
`
`
`From: Ying-Moh Liu [mailto:yml7245@yahoo.com]
`Sent: Tuesday, October 10, 2006 9:09 AM
`To: Jerry Carollo ; Mahir Abrahim ; Michael Hoppe
`Cc: David Lynch ; Bill Maffucci
`Subject: RE: RFQ EML 06-1009 (Drawing Number 105-1012 Rev 2 with
`exceptions/modifications)
`
`
`Jerry:
`
`I am still working with Newport Glass to see if they can agree to be the prime for a
`coated mirror with Cascade to be the sub for the coating. Do you agree with this
`approach? Once I confirm that one way or the other, we can place the order.
`
`I believe the Proflux is ready to go. So, if you like, we can place the order now. I
`assume someone in CDS will prepare the PO , right?
`
`I asked Nitto Denko to ship some half-wave films to CDS address under my
`name. Please let me know when you receive them. I am not sure if you want to
`characterize them in your lab and I would be happy to do that with someone in
`CDS. Please think about it and let me know.
`
`
`2
`
`REALD INC.
`Exhibit 2075-2
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`

`
`I am not sure what to do with Colorlink at this point. Lenny was gonna talk to Josh,
`their CEO, and see if Josh could push CL. No further news so far. Do you want me to
`continue my dialog with Lenny or you may be more effective in taking care of this?
`
`
`Ying-Moh
`
`Jerry Carollo <JCarollo@creativedis.com> wrote:
`I would place it now.
`
`
`
`
` J
`
`
`
`From: Ying-Moh Liu [mailto:yml7245@yahoo.com]
`Sent: Monday, October 09, 2006 4:12 PM
`To: Jerry Carollo ; Mahir Abrahim ; Michael Hoppe
`Subject: Fwd: RFQ EML 06-1009 (Drawing Number 105-1012 Rev 2 with
`exceptions/modifications)
`
`
`Jerry:
`
`
`Here is the quote for the fabrication of the 12" mirror. I have a separate quote
`for the enhanced aluminum coating for the mirror from Cascade as attached. I
`will talk to both vendors to decide which vendor will be the prime. When do
`we need to place the order?
`
`
`Ying-Moh
`
`Newport Glass <newportglass@earthlink.net> wrote:
`Date: Mon, 09 Oct 2006 14:56:19 -0700
`To: Ying-Moh Liu <yml7245@yahoo.com>
`From: Newport Glass <newportglass@earthlink.net>
`Subject: RFQ EML 06-1009 (Drawing Number 105-1012 Rev 2 with
`exceptions/modifications)
`
`Per your request ~
`
`
`
`Material = Pyrex, Fine annealed
`Part Number = 105-1012 Rev A (mirror, 12" diameter, D-Cut)
`
`Diameter = Requested 12.000" +/- .005" ~ Offered = 12.000" +/- .010"
`Thickness = .500" +/- .005"
`Circumference = machine ground
`Circumference reference flat = Requested 4.500" +/- .005" from the
`center ~
`Offered 4.500" +/- .010" from the center
`Edges = Requested B evel .020" +.010 - .000" ~ Offered = .020" +
`.015" - .005"
`Face 1 = machine ground and polished
`= flatness = 1/2 wave or better at 633 nm ~~ (best effort
`due to the thickness of the substrate)
`
`3
`
`REALD INC.
`Exhibit 2075-3
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`

`
`= scratch/dig = 80/50
`= clear aperture 2.5mm from the circumference
`Face 2 = ground
`Coating = none
`
`Qty = 2 pcs.
`Price/each =$573.80
`________________________________________________________
`____
`
`Terms
`
`FO B Stanton, CA. ( Los Angeles Metropolitan Area)
`
`Estimated processing time is 20 to 25 working days prior to shipment.
`
`Payment terms ~ credit card
`
`Orders are to be submitted in writing, e.g., e-mail, fax (714-484-7600)
`showing the " ship to" and "bill to" address and a telephone number
`where
`you can reached during normal business hours.
`
`This quotation is valid for 30 days
`
`Respectfully
`
`Ray Larsen
`
`
`
`At 01:55 PM 10/3/2006 -0700, you wrote:
`
`>Ray:
`>
`>The drawing shows a flat cut on the mirror for mechanical reasons.
`Per
`>our conversation, I may be able to live with a 0.5" clearance if 0.25"
`>costs a lot more. We may be able to live with 1 wave flatness if it
`saves
`>a little money. Please advise the differences. Please also separate the
`>fabrication charge from the coating charge. You may call me @
`>(949)241-4799 anytime for questions. Look forward to receiving
`your quote
`>today if possible. Thank you.
`>
`>Ying-Moh
`>
`
`
`4
`
`
`
`REALD INC.
`Exhibit 2075-4
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`

`
`Get your email and more, right on the new Yahoo.com
`
`
`
`Get your email and more, right on the new Yahoo.com
`
`
`
`All-new Yahoo! Mail - Fire up a more powerful email and get things done faster.
`
`
`
`Get your email and more, right on the new Yahoo.com
`
`
`
`
`
`
`
`
`
`Get your own web address for just $1.99/1st yr. We'll help. Yahoo! Small Business.
`
`
`5
`
`REALD INC.
`Exhibit 2075-5
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035