`EXHIBIT 2041
`
`
`
`
`
`From:
`Sent:
`To:
`Subject:
`
`Ying-Moh Liu <yml7245@yahoo.com>
`Saturday, June 27, 2015 5:59 PM
`McCormack, Brian C
`Fw: Proflux part drawing
`
`
`----- Forwarded Message -----
`From: Ying-Moh Liu <yml7245@yahoo.com>
`To: Mahir Abrahim <MAbrahim@creativedis.com>
`Sent: Tuesday, September 19, 2006 3:45 PM
`Subject: RE: Proflux part drawing
`
` I
`
` think TA stands for transmission axis. I have used this callout before, so let's do it as he indicated. I
`don't think it is necessary to go all the way across. Also, we want to change from VC4 to VC2 as
`noted. Thank you.
`
`
`Ying-Moh
`
`Mahir Abrahim <MAbrahim@creativedis.com> wrote:
`Hi Ying-Moh,
`
`
`What does the TA stand for on Raymond’s markup? I’m not familiar with that acronym. Also, is this callout
`normally drawn across the face of the view as pictured, or can I just attach a “TA” to the 120-mm dimension?
`Thanks.
`
`-Mahir
`
`
`
`
`From: Ying-Moh Liu [mailto:yml7245@yahoo.com]
`Sent: Monday, September 18, 2006 2:30 PM
`To: Jerry Carollo; Mahir Abrahim
`Subject: Proflux part drawing
`
`
`Jerry:
`
`
`Do you want to save $200 each on Proflux with VC4 or go with VC2 with better quality?
`
`
`Mahir: Would you make the changes as indicated in Raymond's markup of the Proflux
`drawing? Thank you.
`
`
`Ying-Moh
`
`Raymond Boyer <Rboyer@moxtek.com> wrote:
`Subject: FW: part drawing
`Date: Mon, 18 Sep 2006 15:21:11 -0600
`From: Raymond Boyer <Rboyer@moxtek.com>
`To: Ying-Moh Liu <yml7245@yahoo.com>
`
`Ying Moh,
`
`1
`
`REALD INC.
`Exhibit 2041-1
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`
`Here is the part drawing. Also, the difference in cost from VC4 to VC2
`is around $200.
`
`Thanks,
`
`
`
`Raymond
`
`
`
`CONFIDENTIALITY NOTICE: This communication, and any documents, files or previous e-
`mail messages attached to it, may contain confidential information that is legally privileged. Do
`not read this e-mail if you are not the intended recipient. If you are not the intended recipient,
`or a person responsible for delivering it to the intended recipient, you are hereby notified that
`any disclosure, copying, distribution or use of any of the information contained in or attached
`to this transmission is strictly prohibited. If you have received this transmission in error, please
`immediately notify us by e-mail, forwarding this to the e-mail address above or by telephone at
`(801) 225-0930, and destroy the original transmission and its attachments without reading or
`saving in any manner. Thank you.
`
`
`
`Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or
`less.
`
`
`
`
`
`Get your email and more, right on the new Yahoo.com
`
`
`2
`
`REALD INC.
`Exhibit 2041-2
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
Accessing this document will incur an additional charge of $.
After purchase, you can access this document again without charge.
Accept $ Charge
Still Working On It
This document is taking longer than usual to download. This can happen if we need to contact the court directly to obtain the document and their servers are running slowly.
Give it another minute or two to complete, and then try the refresh button.
A few More Minutes ... Still Working
It can take up to 5 minutes for us to download a document if the court servers are running slowly.
Thank you for your continued patience.
This document could not be displayed.
We could not find this document within its docket. Please go back to the docket page and check the link. If that does not work, go back to the docket and refresh it to pull the newest information.
Your account does not support viewing this document.
You need a Paid Account to view this document. Click here to change your account type.
Your account does not support viewing this document.
Set your membership
status to view this document.
With a Docket Alarm membership, you'll
get a whole lot more, including:
- Up-to-date information for this case.
- Email alerts whenever there is an update.
- Full text search for other cases.
- Get email alerts whenever a new case matches your search.
One Moment Please
The filing “” is large (MB) and is being downloaded.
Please refresh this page in a few minutes to see if the filing has been downloaded. The filing will also be emailed to you when the download completes.
Your document is on its way!
If you do not receive the document in five minutes, contact support at support@docketalarm.com.
Sealed Document
We are unable to display this document, it may be under a court ordered seal.
If you have proper credentials to access the file, you may proceed directly to the court's system using your government issued username and password.
Access Government Site
