`EXHIBIT 2029
`
`
`
`
`
`From:
`Sent:
`To:
`Subject:
`Attachments:
`
`Ying-Moh Liu <yml7245@yahoo.com>
`Saturday, June 27, 2015 5:48 PM
`McCormack, Brian C
`Fw: Real D Final Design Presentation
`Real_D_Final_DR.ppt
`
`
`----- Forwarded Message -----
`From: Jerry Carollo <JCarollo@creativedis.com>
`To: Michael Hoppe <MHoppe@creativedis.com>; Mahir Abrahim <MAbrahim@creativedis.com>; Ying-Moh Liu
`<yml7245@yahoo.com>
`Cc: Bill Maffucci <BMaffucci@creativedis.com>
`Sent: Wednesday, September 13, 2006 4:12 PM
`Subject: Real D Final Design Presentation
`
`Guys:
`
`
`Attached is the start of the presentation for the meeting. Shown are the customer requirements. Please review and make
`sure I didn’t make any mistakes. Many of the requirements are design goals. It is clear in the SOW that the prototype will
`only interface with the Christie 2000 projector. The system is not required to “swing” out of the way when not showing 3D
`movies.
`
`I will complete the schedule and do a few more charts. I look at this review as a sit around the table. Mahir you might
`want to use the ProE viewer to show the system on our projector. Maybe this can work with our wireless link.
`
`
`Please make changes and get back to me.
`
`
`Jerry Carollo
`President/CEO
`
`
`
`5909 Sea Lion Pl. Suite A
`Carlsbad , CA 92010
`(T) 760.476.0339 x202
`(F) 760.476.0620
`(C) 760.889.2875
`
`
`
`1
`
`REALD INC.
`Exhibit 2029-1
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`September 22, 2006
`Final Design Review
`
`CDS
`
`REALD INC.
`Exhibit 2029-2
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`•Summary
`
`permitting
`
`•Company Overview (time
`
`•PBS Final Design Review
`
`Agenda
`
`REALD INC.
`Exhibit 2029-3
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`–Action item review
`
`•Summary
`•Issues
`
`–System, Optical, Mechanical
`
`•Technical Approach
`
`–Compliance matrix
`
`•Requirement Review
`
`–Schedule
`–Programmatics
`
`•Program Objectives
`
`PBS Final Design Review
`
`REALD INC.
`Exhibit 2029-4
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`–Testing and Acceptance; 14 weeks
`–Prototype Delivery; 12 weeks
`–Final Design Review; 7 weeks –9/22
`–Initial Design Review; 4 weeks -complete
`
`•Contract schedule (ARO; 8/21)
`
`in Attachment 1 of the SOW
`
`•Deliver 1 prototypesystem per the requirements
`
`apparatus using wire grid polarizer (WGP)
`
`•Perform final design of image combiner optical
`
`Programmatics
`
`REALD INC.
`Exhibit 2029-5
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`Comply
`
`25,000
`
`25,000
`
`Light Output (Lumens)
`
`Comply
`
`400-700nm
`
`400-700nm
`
`Spectrum
`
`Comply
`
`30
`
`30
`
`(degrees)
`Max Projection Angle
`
`Comply
`
`50x75mm
`
`Light Patch
`
`Comments
`Comply/
`
`Value
`
`Expected
`
`SOW Value
`
`Requirement
`
`Requirement Review
`
`REALD INC.
`Exhibit 2029-6
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`enough
`
`may not be flat
`WGP/fold mirror
`
`projector effects
`Z-Screen and
`
`TBD
`
`TBD
`
`25’ screen
`
`image structure on
`Resolvable DMD
`
`75%
`
`Resolution
`
`Uniformity
`Illumination
`
`Z-Screen effects
`
`TBD
`
`.01x and .01y
`
`Color Uniformity
`
`degrees
`
`Max angle 30
`
`degrees
`
`30
`
`1.78:1
`2.39:1,1.85:1,
`
`Aspect Ratio
`
`Comments
`
`Comply/
`
`Value
`
`Expected
`
`SOW Value
`
`Requirement
`
`Requirement Review
`
`REALD INC.
`Exhibit 2029-7
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`Specification
`
`WGP
`
`effects
`
`Z-Screen
`
`TBD
`
`Design Goal
`
`Pi Cell; 5000:1
`Linear P entering
`
`is 500:1
`
`w/projector that
`
`ANSI; 400:1
`
`1 edge
`
`+/-0.5 center, +/-
`
`Polarization State
`
`Contrast
`
`Pixel Alignment (pixels)
`
`ents
`
`Value
`
`Comply/Comm
`
`Expected
`
`SOW Value
`
`Requirement
`
`Requirement Review
`
`REALD INC.
`Exhibit 2029-8
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`Modifications
`
`With
`
`Yes
`
`projectors
`To other
`
`Projector Adaptability
`
`Comply?
`
`Yes?
`
`1.8 –2.4 Lens
`
`Interface
`Prototype Lens
`
`Comply
`
`Yes
`
`2000
`
`Christie CP-
`
`Interface
`Prototype Projector
`
`Design Goal
`
`system
`
`> 1.7 X current
`
`Overall Efficiency
`
`Comments
`
`Comply/
`
`Value
`
`Expected
`
`SOW Value
`
`Requirement
`
`Requirement Review
`
`REALD INC.
`Exhibit 2029-9
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`–PBS; WGP
`
`•Approach outlined in study
`
`Technical Approach
`
`REALD INC.
`Exhibit 2029-10
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`Optical
`
`REALD INC.
`Exhibit 2029-11
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`Mechanical
`
`REALD INC.
`Exhibit 2029-12
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`Technical Challenges
`
`REALD INC.
`Exhibit 2029-13
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`
`
`Summary
`
`REALD INC.
`Exhibit 2029-14
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035