EXHIBIT 2026
`
`EXHIBIT 2026EXHIBIT 2026
`
`
`
`

`
`From:
`Sent:
`To:
`Subject:
`
`Ying-Moh Liu <yml7245@yahoo.com>
`Saturday, June 27, 2015 5:47 PM
`McCormack, Brian C
`Fw: Action items
`
`
`----- Forwarded Message -----
`From: Jerry Carollo <JCarollo@creativedis.com>
`To: Ying-Moh Liu <yml7245@yahoo.com>
`Cc: Michael Hoppe <MHoppe@creativedis.com>; Mahir Abrahim <MAbrahim@creativedis.com>; Bill Maffucci
`<BMaffucci@creativedis.com>
`Sent: Wednesday, September 13, 2006 1:47 PM
`Subject: RE: Action items
`
`Yes, to all questions.
`
`
`You will need to be able to address all the significant items like you did in the study. I think the screen errors and through
`put analysis are key. Need to make them aware of the challenges deforming the fold mirror and flatness of the WGP – in
`that this is something we cannot evaluate until we build the system.
`
`
`Jerry
`
`
`
`From: Ying-Moh Liu [mailto:yml7245@yahoo.com]
`Sent: Wednesday, September 13, 2006 1:21 PM
`To: Jerry Carollo
`Cc: Michael Hoppe ; Mahir Abrahim
`Subject: RE: Action items
`
`
`Jerry:
`
`
`Regarding meeting next week, I'll make arrangement to attend it at 8AM on 9/22 in your office. Is Michael
`going to lead the CDS team in your absence?
`
`
`Mahir: Would you prepare a drawing for the HWP ASAP so that I can send it to Colorlink (CL)? Thank you.
`
`
`Ying-Moh
`
`Jerry Carollo <JCarollo@creativedis.com> wrote:
`YM:
`
`I¡¦ve answered your questions in the body of the email.
`
`
`Note to all.?Real D is going to be here next Friday for our Final Design Review. I will not be here but will do most
`of the top level charts ¡V with the requirements. You guys will have to address the design approach and
`issues. I will also do a schedule.?I think this will be a 2-3 hour meeting. I am traveling back from Boston that AM
`and will be in CLD by 12:30PM.
`
`
`The meeting is scheduled for 8:00Am @ CDS.
`
`
`Jerry
`
`
`1
`
`REALD INC.
`Exhibit 2026-1
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`

`
`
`
`From: Ying-Moh Liu [mailto:yml7245@yahoo.com]
`Sent: Wednesday, September 13, 2006 10:00 AM
`To: Jerry Carollo
`Subject: RE: Action items
`
`
`Jerry:
`
`
`Just want to let you know that I have not contacted CL for HWP as I have been awaiting an
`introduction. Do you want me to proceed contacting them or wait a little more??We need a drawing
`and then go ahead and contact CL, let them know you are working with CDS.
`
`
`Do we still want RealD to provide Z-screens with and wthout linear polarizers? No, because of the
`lower defect spec for the WGP. For the ones that do not have LP integrated, would RealD supply the
`LPs separately? N/A Or we abandoned this idea and the Z-screen will come with LP? See first question
`
`
`Regarding lens spec and throw ratio, I see Lenny is checking with his team. So I'll wait for them to tell
`us the exact configuration before I refine my model. Agree? Yes
`
`I am still waiting for quote from Raymond and I'll follow up with him today. OK
`
`
`For the 45 deg. turning mirror, do you want to pay extra for enhanced aluminum coating with about 94-
`95% reflectivity? Protected aluminum can give us about 91-92% reflectivity, which is what was
`assumed in the existing $245 quote. Enhanced to get the most through put.?We will need a first order
`transmission analysis for each path so we can predict the luminance gain by combining the two paths.
`
`
`Anything else you see that I should take care at this time? I am prepared to send you my 1st bi-weekly
`invoice. Is that OK? OK
`
`
`Ying-Moh
`
`Jerry Carollo <JCarollo@creativedis.com> wrote:
`I will contact RealD to make the introductions.
`
`
`Jerry
`
`
`
`
`From: Ying-Moh Liu [mailto:yml7245@yahoo.com]
`Sent: Monday, September 11, 2006 3:12 PM
`To: Jerry Carollo
`Cc: Michael Hoppe ; Mahir Abrahim
`Subject: RE: Action items
`
`
`Jerry:
`
`
`Ragarding CL's linear polarizer, it is used in the case when the Z-screen does not include one as
`one possible configuration that we discussed at RealD. Maybe RealD will supply that and we
`don't need to. Is this one more thing to confirm with RealD? Should I wait for RealD's
`introduction before contacting CL even though I think it is better that way?
`
`
`2
`
`REALD INC.
`Exhibit 2026-2
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`

`
`
`
`Ying-Moh
`
`Jerry Carollo <JCarollo@creativedis.com> wrote:
`YM:
`
`
`Below are my comments imbedded in your email.
`
`
`
`
` J
`
`From: Ying-Moh Liu [mailto:yml7245@yahoo.com]
`Sent: Monday, September 11, 2006 11:02 AM
`To: Jerry Carollo
`Cc: Michael Hoppe ; Mahir Abrahim
`Subject: Action items
`
`Jerry:
`
`
`Please see if you agree with the following action items:
`
`
` *
`
` I
`
` YML to get quote from Moxtek for PBF02 of 1.6x110x140mm size with AR. Lead
`time about 3 weeks according to Ray. CDS to provide part drawing ASAP.?Mahir to
`provide drawing to YM to add comments.
`* YML to get quotations for flat mirror of 1"x12"OD with aluminum coating.
`Enahnced aluminum available at additional cost, please decide. My preliminary quote
`is $245 each and 3 week lead time.?We will go with the flat mirror and try to deform.
`* CDS to decide if a plunger can effectively create a spherical radius of 100m to 400m
`from a 1" flat mirror. Otherwise, a spherical mirror of 200m radius would be a better
`choice to lessen the force required to change radius. A preliminary quote of $1500-
`2000 is given to me. Lead time TBD.?See above
`* YML to get quote for Colorlink linear polarizer. It would be better if RealD could
`introduce us to Colorlink and we just use the same part as currently used on their Z-
`screen. I assume the standalone polarizer needs to be embedded in glass substrates. I
`will find out what is available from Colorlink.?I don¡¦t think we need the polarizer
`from CL but the 1.2 wave plate ¡V correct?
`* YML to get quote for HWP from Colorlink. See above
`* YML to get quotes for input window and other windows. CDS to advise sizes. Mahir
`action
`* CDS to decide with RealD if lens front cover can be cut ASAP so that my model can
`be properly set up. This would have impact to proflux sizes. RealD CEO has raised
`negative comment.?Again we need to get the largest ProFlux and go from there. They
`will modify the projector they have.
`
` look forward to your inputs and please let me know if I missed anything. Thank you.
`
`
`Ying-Moh
`Jerry Carollo <JCarollo@creativedis.com> wrote:
`Looks good.
`
`I think we need to understand the relationship of TR and EFL/FOV. In any case we
`want to make the most out of the ProFlux but it looks like we will be OK.
`
`jerry
`
`3
`
`REALD INC.
`Exhibit 2026-3
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`

`
`
`
`
`
`From: Ying-Moh Liu [mailto:yml7245@yahoo.com]
`Sent: Sunday, September 10, 2006 10:40 PM
`To: Jerry Carollo
`Cc: Michael Hoppe ; Ying-Moh Liu ; Mahir Abrahim
`Subject: Preliminary analysis of throw ratio effect
`
`
`Jerry and team:
`
`
`Thank you for following up on the issues with RealD and hope to get their
`answers soon. Please review the attached preliminary report on the effects of
`throw ratios and let me know your comments and suggestions. I might add a
`case for TR=2.2, but it may not be needed because there should be no issues to
`the component sizes. It appears that all cases with TR from 1.6 to 2.2 are all
`OK for Proflux size. I'll study more to make sure and look forward to your
`inputs as well.
`
`
`Ying-Moh
`
`Jerry Carollo <JCarollo@creativedis.com> wrote:
`Guys:
`
`
`Could you please confirm the following:
`
`Is the DLP pixel pitch and pixel count used in their projector 13.68um
`or 13.8um. Although a small difference, I think it is a good idea to
`clarify it.
`
`
`Jerry
`
`
`
`
`
`From: Joshua Greer [mailto:jgreer@reald.com]
`Sent: Sunday, September 10, 2006 4:07 AM
`To: Lenny Lipton; Jerry Carollo
`Cc: Matt Cowan; Roberto Luevano
`Subject: RE: Actions From the Meeting with RealD
`
`I few issues with the comments below:
`
`
`#1 I may have Jury Duty on the 22nd but schedule anyway.
`
`
`#3 I don't believe that we can not machine down the lens. typically this part
`belongs to the theater and they would not be happy with that approach.
`
`
`#6 The lenses are actually made by Minolta, not Cannon.
`
`
`#7 I would design this full the full image area. The total DMD array is
`2048x1080. typically we do 1920x807 scope and 1668x900 for
`flat. however, we expect to go to full array by June of next year so I would
`prefer to design for that.
`
`I can follow up with Colorlink. What specifically do you need from them?
`
`4
`
`REALD INC.
`Exhibit 2026-4
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`

`
`
`
`Joshua
`
`
`
`
`Joshua Greer
`CEO - REAL D
`100 North Crescent Drive
`Suite 120
`Beverly Hills , CA 90210
`310-385-4000 - Phone
`310-385-4001 - Fax
`
`
`
`
`
`
`From: Lenny Lipton
`Sent: Thu 9/7/2006 10:02 AM
`To: ' Jerry Carollo '
`Cc: Matt Cowan; Roberto Luevano; Joshua Greer
`Subject: RE: Actions From the Meeting with RealD
`
`Jerry,
`
`I am copying my colleagues on your message so that
`they van be informed, follow-up, and comment on your
`list.
`
`
`With regard to ColorLink, I must confer with Josh about
`how to go about making that request.
`
`
`See comments below.
`
`
`From: Jerry Carollo [mailto:JCarollo@creativedis.com]
`Sent: Thursday, September 07, 2006 9:12 AM
`To: Lenny Lipton
`Subject: Actions From the Meeting with RealD
`Lenny:
`
`It was good seeing you again yesterday and getting another look at the
`projectors.
`
`
`The following are open items/actions we need to take.
`
`
`1. Schedule for next review schedule in Carlsbad I proposed the
`AM of Sept 22nd Friday to Matt and he will get
`back to me
`2. The best projector for the first system is the Christie; given it has
`accessible mounting hardware with a protruding lens Sound
`correct
`3. The lens will need to have the shield machined down so we can get
`the PBS assembly as close to the lens as possible ditto
`5
`
`REALD INC.
`Exhibit 2026-5
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`

`
`
`
`
`
`
`
`
`
`4. 2D & 3D CAD for the projector with inset lens; Roberto
`Action Roberto we need you for these three items
`5. Z-Screen assembly including the optic, connectors, and mounting
`hardware; Roberto Action
`6. Specs on the Canon lenses that are available for use with the
`various projectors; Roberto Action
`7. What is the usable active area of the DLP? We heard that 30% is
`not used. This is very important information as it helps us better
`understand the sizing. We have to plan this for the full
`image area. Matt -- do you know the size?
`8. Z-Screens may not require an input polarizer; but I suggest RealD
`provide both versions. If not needed it will increase
`transmission. We had assumed that clean-up
`polarizers might be required as needed and the
`prototype can be built with naked ZScreens so we
`can add or subtract sheet polarizers as required.
`
`
`
`Lastly; you were going to send an email to Color Link and inform then that
`CDS is an important supplier to RealD and that the work they are doing you
`CDS is a priority. I'll speak to Josh.
`
`If I can think of anything else I¡¦ll follow-up.
`
`
`Jerry
`*******************************************************************************************
`****
`This email and any files transmitted with it are confidential and intended solely
`for the use of the individual or entity to whom they are addressed and may
`contain confidential and privileged information. No one else is authorized to
`distribute, forward, print, copy or act upon any information contained in this email.
`If you are not the intended recipient, please contact the sender by reply email
`and destroy all copies of the original message.
`*******************************************************************************************
`*****
`
` ?
`
`
`
`
`
`Want to be your own boss? Learn how on Yahoo! Small Business.
`
` ?
`
`
`
`
`
`Do you Yahoo!?
`Get on board. You're invited to try the new Yahoo! Mail.
`
` ?
`
`
`
`
`
`Stay in the know. Pulse on the new Yahoo.com. Check it out.
`
` ?
`
`
`
`
`
`All-new Yahoo! Mail - Fire up a more powerful email and get things done faster.
`
`
`6
`
`REALD INC.
`Exhibit 2026-6
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`

`
`
`
`
`
`Do you Yahoo!?
`Get on board. You're invited to try the new Yahoo! Mail.
`
`
`7
`
`REALD INC.
`Exhibit 2026-7
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035