`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`EXHIBIT 2017
`
`EXHIBIT 2017EXHIBIT 2017
`
`

`

`From:
`Sent:
`To:
`Subject:
`Attachments:
`
`Ying-Moh Liu <yml7245@yahoo.com>
`Friday, June 26, 2015 9:56 AM
`McCormack, Brian C
`Fw: Quote for PBF02
`105-1008.pdf
`
`
`----- Forwarded Message -----
`From: Mahir Abrahim <MAbrahim@creativedis.com>
`To: Ying-Moh Liu <yml7245@yahoo.com>
`Cc: Jerry Carollo <JCarollo@creativedis.com>
`Sent: Monday, September 11, 2006 2:54 PM
`Subject: RE: Quote for PBF02
`
`Ying-Moh,
`
`
`Here is a prelim dwg of the Proflux part for you to markup.
`
`-Mahir
`
`
`
`From: Ying-Moh Liu [mailto:yml7245@yahoo.com]
`Sent: Monday, September 11, 2006 2:53 PM
`To: Rboyer@moxtek.com; Jerry Carollo ; Michael Hoppe ; Mahir Abrahim
`Subject: Quote for PBF02
`
`
`Dear Raymond:
`
`I apologize for the poor quality in my cell phone transmission. Per our conversation, please provide a quotation
`for the following:
`
`
` PBF02 optically flat PBS
`* Dimensions : 1.6mm borofloat, clear aperture 110x140mm (~180mm diagonal) with additional material for
`mounting. Drawing will be provided soon. Please include custom trimming in your quote.
`* AR coating on bare side for < 0.5% reflectance over visible range.
`* VC4 quality except no stain and a TBD number of <0.6mm spots. Please advise if these exceptions makes
`much difference to price and lead time.
`* Quantity 2
`
`If you have any large area (4-6" diameter) interferogram showing the surface flatness of the part or its substrate,
`please send it to me for image quality analyses. If you have any questions, please contact me ASAP and we
`look forward to receiving your quote. Thank you.
`
`
`Ying-Moh Liu
`(408)828-0789
`
`
`
` *
`
`1
`
`
`
`REALD INC.
`Exhibit 2017-1
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`

`

`From: Raymond Boyer [mailto:Rboyer@moxtek.com]
`Sent: Friday, September 08, 2006 8:20 AM
`To: Jerry Carollo
`Subject: RE: Information
`
`
`Jerry,
`
`
`We do not have any glass vendors who do this. What type of flatness are you looking for? The Schott
`Borofloat has the flatness of 1.4 lambda Power 1.5 lambda Astigmatism over 25.4 mm Diameter. I have
`attached the data sheet for the Flat Polarizing Beamsplitter.
`
`I received the NDA. I will send you a copy of it as soon as Doug signs it.
`
`
`Thanks,
`Raymond Boyer
`Marketing and Business Coordinator
`MOXTEK, Inc.
`452 West 1260 North
`Orem , UT 84057
`Ph: 801-225-0930 Fax: 801-734-1797
`
`
`
`
`
`
`From: Jerry Carollo [mailto:JCarollo@creativedis.com]
`Sent: Friday, September 08, 2006 9:03 AM
`To: Raymond Boyer
`Subject: Information
`Raymond:
`
`
`Thanks for the information. It looks like we can use the VC4 spec with the possible exception of the
`large area stain (20mm) and the unlimited 0.6mm spots.
`
`I sent out the NDA when it is executed we can talk in more detail.
`
`
`Lastly, regarding the large device we will need, we may need to have it bonded (glass side) to a thicker
`substrate to make it flatter. Do you have any vendors who do this?
`
`
`Thanks
`
`
`Jerry
`
`CONFIDENTIALITY NOTICE: This communication, and any documents, files or previous e-
`mail messages attached to it, may contain confidential information that is legally privileged. Do
`not read this e-mail if you are not the intended recipient. If you are not the intended recipient,
`or a person responsible for delivering it to the intended recipient, you are hereby notified that
`any disclosure, copying, distribution or use of any of the information contained in or attached
`to this transmission is strictly prohibited. If you have received this transmission in error, please
`immediately notify us by e-mail, forwarding this to the e-mail address above or by telephone at
`(801) 225-0930, and destroy the original transmission and its attachments without reading or
`saving in any manner. Thank you.
`
`
`
` ?
`
`
`
`
`
`2
`
`
`
`REALD INC.
`Exhibit 2017-2
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`

`

`Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2?min or
`less.
`
`
`
`
`Get your email and more, right on the new Yahoo.com
`
`
`3
`
`REALD INC.
`Exhibit 2017-3
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`

`

`A
`
`REV
`
`SHEET 1 OF 1
`
`105-1008
`
`DRAWING NUMBER
`
`0.500
`
`B
`
`SIZE
`
`SCALE:
`
`66689
`
`CODE IDENT NO.
`
`POLARIZER, WIRE GRID
`
`Carlsbad, CA 92010
`Suite A
`5909 Sea Lion Place
`
`60) 476-0339
`
`(7
`
`FOR QUOTE ONLY
`
`PRELIMINARY
`
`APPD
`
`DATE
`
`EO
`
`PRODUCTION RELEASE
`
`DESCRIPTION
`
`NC
`LTR
`
`REVISIONS
`
`M. ABRAHIM05-Sep-06
`M. ABRAHIM05-Sep-06
`
` 105-1008-001
`
`FILE/PART NO.
`
` DIMENSIONS ARE IN mm,
`
`INTERPRET PER ASME Y14.5M-1994
`
`2X R286.25
`
`2X R15
`
`2X R185
`
`PRO/E REL LEVELPROI_RELEASE
`PRO/E VERSION
`PROI_VERSION
`
`140
`
`0.001A
`
`0.001
`
`1.6
`
`A
`
`170
`
`.010ABC
`2. FEATURES WHICH ARE NOT OTHERWISE DIMENSIONED ON
`
` THIS DRAWING SHALL BE LOCATED
`
`
`
`
`
`
` REVISION ON THIS DRAWING (I.E. XXX-XXXX-XXX_REV)
` PART FILE NAME MUST HAVE PART NUMBER FOLLOWED BY
`
` A.1.IGS
`
`105-1008-001.PRT
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`1. FABRICATE PARTS USING ELECTRONIC DATA BASE FILE
`
`NOTES: UNLESS OTHERWISE SPECIFIED
`
`
`
`CORNERS MAX: R .2 OR.2 X .2 CHAMFER MAX.QA
`REMOVE ALL BURRS. BREAK ALL SHARP EDGES AND
`20%
`X < .5
`
`APVD
`APVD
`APVD
`PROD MGR
`
` NONE
`
`FINISH:
`
`MATERIAL: M/F MOXTEK PROFLUX
`
`MFG
`
`0.5CHECK
`.5 < X < 66 < X < 3030 < X < 120X >120ANGLESDRAFT
` TOLERANCES FOR DIMENSIONS:DESIGN
`
`0.5
`
`0.3
`
`0.2
`
`.1
`
`REALD INC.
`Exhibit 2017-4
`MASTERIMAGE 3D, et al. v REALD INC.
`IPR2015-00035
`
`