`Application No.
`App.
`_ nt(s)
`091189.626
`Examiner
`Crescelle Dela Torre
`
`.
`_
`.
`Notice Of Allowablllty
`
`Hedloy
`Group An Unit
`
`2173
`
`
`
`
`
`if not included
`All claims being allowable. PROSECUTION ON THE MERITS IS (OR REMAINS) CLOSED in this application.
`herewith ior previously mailed), a Notice of Allowance and issue Fee Due or other appropriate communication Will be mailed
`in due course
`
`
`X This communication is responsrve to Dec 18, 2000
`
`X The allowed claims) islare 8—68
`The draWings filed on
`
`are acceptable
`
`2: Acknowledgement IS made of a claim for foreign priority under 35 U.S.C, §119(a)—(d),
`‘: All
`[chme*
`Edens
`of the CERTIFIED copies of the priority documents have been
`2Q received.
`i received in Application No. (Series Code/Serial Number)
`- received in this national stage application from the international Bureau (PCT Rule 17 2(a))
`'Certfied copies not received:
`N DEW/W A9"UCA1\©M No
`3.two“,
`Acknowledgement is made of a claim for domestic priority under 35 USC § 119(9)
`
`A SHORTENED STATUTORY PERIOD FOR RESPONSE to comply with the requirements noted below is set to EXPIRE
`THREE MONTHSQOM THE "DATE MAILED" of this Office action. Failure to timely comply will result in
`ABANDONMENT of this appiication Extensrons of time may be obtained under the proviSions 0t 37 CFR l 136(a)
`i Note the attached EXAMINER'S AMENDMENT or NOTICE OF INFORMAL. APPLICATION, PTO-152. which discloses that
`the oath or declaration is deficient. A SUBSTITUTE OATH OR DECLARATION IS REQUIRED
`
`X;
`
`'
`
`X: Applicant MUST submit NEW FORMAL DRAWINGS
`because the originalty filed drawings were declared by applicant to be informal,
`including changes required by the Notice of Draftsperson‘s Patent Drawing Review, PTO—948, attached hereto or to
`Paper No
`14.
`including changes required by the proposed drawing correction filed on
`approved by the examiner
`including changes requrred by the attached Examiner's AmendmentIComment.
`"
`identifying indicia such as the application number (see 37 CFR 1.B4(c)) should be written on the reverse side of
`the drawings. The drawings should be filed as a separate paper with a transmittal lettter addressed to the Official
`Draftsperson,
`
`I which has been
`
`. Note the attached Examiner's comment regarding REQUIREMENT FOR THE DEPOSIT OF BIOLOGICAL MATERIAL
`
`Any response to this letter should include, in the upper right hand corner, the APPLICATION NUMBER (SERIES
`CODE/SERIAL NUMBER)
`If applicant has received a Notice oi Allowance and issue Fee Due‘ the ISSUE BATCH NUMBER
`and DATE of the NOTICE OF ALLOWANCE should also be included
`
`’
`
`Attachmentls)
`. Notice of References Cited, PTO-892
`Information Disclosure Statementls), PTO~144Q, Paper No(s)
`Notice of Draftsperson‘s Patent Drawing Revrew, PTO-948
`Notice of informal Patent Application, PTO-152
`:ntervrew Summary, PTO-413
`Examiner's Amendment/Comment
`
`I.‘X
`
`Notice of Allowability
`
`Part of Paper No
`
`14
`
`Arendi S.A.R.L. - Ex. 2006
`
`Page 1 of 4
`Arendi S.A.R.L. - Ex. 2005
`Page 1 of 4
`
`, Examiner‘s Comment Regarding Requirement for Deposit of Biological Material
`X' Examiner's Statement of Reasons for Allowance
`
`U 5 Patent and Trademark Oftlce
`PTO-37 (Rev 9-95)
`
`
`
`
`
`Arendi S.A.R.L. - Ex. 2006
`Page 1 of 4
`
`
`
`Application/Control Number: 09/189,626
`
`Page 2
`
`Art Unit: 2173
`
`REASONS FOR ALLOWANCE
`
`l.
`
`The following is an examiner's statement of reasons for allowance:
`
`The present invention describes a computerized document information handling method
`
`wherein “upon single entry of the execute command", the document is analyzed to determine if
`
`first information is contained therein, and if the first information is contained in the document. an
`
`information source is searched for second information associated with the first information using a
`
`record retrieval program. The closest prior art, Tso (US. patent 6,085,201) similarly teaches a
`
`context sensitive template engine which “generates a context-sensitive text message
`
`corresponding to an input text string". However, in T30, the text string to be processed is
`
`determined by the current cursor position, as specified by the user [see col. 4, line 31 to col, 5,
`
`line 67}, whereas the present invention “does not require the user to select the text string to be
`
`processed since it functions automatically upon a single click of an input device” to determine if
`
`the first information is contained within the document.
`
`Any comments considered necessary by applicant must be submitted no later than the
`
`payment of the issue fee and, to avoid processing delays, should preferably accompany the issue
`
`fee. Such submissions should be clearly labeled "Comments on Statement of Reasons for
`
`Allowance."
`
`2.
`
`Any inquiijr concerning this communication or earlier communications from the examiner
`
`should be directed to Crescelle dela Torre whose telephone number is (703) 305-9782,
`
`(1ng
`CRESCELLE N. DELA TORRE
`PRIMARY EXAMINER
`t/2/ot
`
`Arendi S.A.R.L. - Ex. 2006
`
`Page 2 of 4
`Arendi S.A.R.L. - Ex. 2005
`Page 2 of 4
`
`Arendi S.A.R.L. - Ex. 2006
`Page 2 of 4
`
`
`
`ATTACHMENT TO AND MODIFICATION OF
`
`NOTICE 0FALLOWABIL1TY(PTO~37)
`(November, 2000)
`
`NO EXTENSIONS OF TIME ARE PERMITTED TO FILE
`
`CORRECTED OR FORMAL DRAWINGS, OR .-\ SUBSTITI'TE
`OATH OR DECLARATION, nonvithstanding any indication to the
`contrary in the attached Notice of Allow/ability (PTO—3.7)
`
`Ifthe following language appears on the attached Notice ol‘ Allou‘tlbllll), lliC
`portion lined through below is of no force and et‘l‘eL‘I and is to be ignoredl
`
`A SHORTENED STATUTORY PERIOD FOR RIiSl’ONSl: lo (oiiipli \Hlll il‘u 7Ci11lllclilfllls noted l‘r‘im is SCI 1:i
`EXPERE THREE MONTHS FROM THE "DATE .‘~I.t\ll,l'{l)" 0: [ms Ollie: runny .
`tiltiru In minim \klll resul'. iii
`ABANDONMENT ot‘ihis application WWW Jlicwvwwélx—‘kK—Hkmi
`
`Similar language appearing in any attachments to the Notice ot‘Allowability,
`such as in an Examiner’s Amendment/Comment or in a Notice of
`
`Drafiperson’s Patent Drawing Review, PTO-948, is also to be ignored.
`
`' The language which is crossed out is connar} [0 amended 37 CFR I.85(c) and 1 136 Sec “Changes to
`Implement the Paten! Busmess Goals". 65 Fed Reg 54603» 54629, 5464 It 54670. 54674 (September 8.
`200011238 Ojf Gaz. Par. Office 77, 99, 110‘ 135. 139 (September 19. 2000)
`
`Arendi S.A.R.L. - Ex. 2006
`
`Page 3 of 4
`Arendi S.A.R.L. - Ex. 2005
`Page 3 of 4
`
`Arendi S.A.R.L. - Ex. 2006
`Page 3 of 4
`
`
`
`Canada U13
`FORM P1094! (REV. 11-97]
`
`US. DEPARTMENT OF COMMERCE—Patent and Trademark Office
`
`ApplicationNo. /A 2 E? 34
`
`marrow To PAPERaM‘
`
`NOTICE OF DRAFTPERSON’S
`PATENT DRAWING REVIEW
`
`
`A”...
`The drawing filied (insert date) /
`A.
`not objecte to by the Draftperson under 37 CFR 1.84 or 1.152.
`objected to by the Draftperson under 37 CFR 1.84 or 1.152 as indicated below. The Examiner will require submission of new. corrected
`drawings whe necessary. Corrected drawings must be submitted according to the instructions on the back of this notice.
`
`
`
`7. SECTIONAL VIEWS. 37 CFR 1.84ih)(3)
`
`Hatching not indicated for sectional portions of an object.
`Fig-(s)
`Sectional designation should be noted with Arabic or
`Roman numbers. Fig.(s)
`8. ARRANGEMENT OF VIEWS. 37 CFR 134(1)
`
`Words do not appear on a horizontal. left-to-right fashion when
`page is either upright or turned. so that the top becomes the right
`side. except for graphs. Fig.(s)
`Views not on the same plane on drawing sheet. Fig.6)
`9. SCALE. 37 CFR 1.84m
`
`Scale not large enough to show mechansim without crowding
`when drawing is reduced in size to twovthirds in reproduction.
`Fig“)—
`
`
`
`.
`
`10.CHARQCFEROFLiNES. NUMBERS,& LETTERS.
`
`37CFR 1.840)
`
`Lines, numbers & letters not uniformly thick and well defined,
`clean. durable and black (poor line quality).
`Fig.(s]
`,_.
`11.8HAD1NG. 37 CFR 1.84m)
`
`Solid black areas pale. Fig.(s)
`
`Solid black shading not permitted. Fig.(s)
`
`Shade lines. pale. rough and blurred Fig.(s)
`12. NUMBERS, LETTERS, 5t REFERENCE CHARACTERS.
`37 CFR 1.413(9)
`
`Numbers and reference characters not plain and legible.
`Fig.(s)
`Figure legends are poor. Figts)
`Numbers and reference characters not oriented in the same
`
`
`
`
`-
`
`1. DRAWINGS. 37 CFR 1.84m): Acceptable categories of drawings:
`Black ink. Color.
`
`Color drawing are not acceptable until petition is granted.
`Figo)
`Pencil and non black ink is not permitted. Fig(s)
`2. PHOTOGRAPHS. 37 CFR1.B4(b)
`
`Photographs are not acceptable until petition is granted,
`
`3 full-tone sets are required. Fig(s)
`
`Photographs not properly mounted (must brysto! board or
`photographic doublewetghtpaper). Fig(s)
`Poor quailty (half—tone). Fig(s)
`_
`3, TYPE OF PAPER. 37 CFR l.84(e)
`
`g Paper not flexible, strong, white and durable.
`Fists)
`
`Erasures. alterations, overwritings, interlineations,
`folds. copy machine marks not acceptable. (too thin)
`Mylar, vellum paper is not acceptable (too thin).
`Fists)
`'
`4. SIZE OF PAPER.
`FR 1.840”): Acceptable sizes:
`
`by 29.7 cm (DIN size A4)
`
`. cm by 27.9 cm (8 1/2 x 11 inches)
`
`
`All drawings sheets not the same size.
`Sheet(s)
`5. MARGINS. 37 CFR 18.4(g): Atttplflbic margins:
`Top 2.5 cm Left 2.5 cm Right 1.5 cm Bottom 1.0 cm
`SIZE: A4 Size
`Top 2.5 Cm Left 2.5 cm Right 15 cm Bottom 1.0 cm
`5121318 1/2 x11
`
`/
`
`
`
`
`
`
`
`
`
`
`
`Margins not accep able. Fig(s)
`Top (T)
`Left 0-)
`Right (R)
`Bottom (B)
`o. VIEWS. CFR 1.8401)
`REMINDER: Specification may require revision to
`correspond to drawing changes.
`
`Views connected by projection lines or lead lines.
`Fig.6)...—
`Partial vicus. 37 CFR 1.84(h)(2)
`
`Brackets needed to ShOW figure as one entity.
`Fig-(5)
`Views not labeled separately or properly-
`Fig.(s)
`Enlarged View not labeled separately or properly.
`Fig.6)
`
`
`
`
`
`direction as the view. 37 CFR l.84(pi(3) Figtst
`Engiigh alphabet not used. 37 CFR 1.84(p)(3) Fig.(s)
`Numbers. letters and reference characters must be at least
`.32 cm (IIS inch) in height. 37 CFR1.84(p)(3)Fig.(s)
`l3. LEAD LINES. 37 CFR I.84(q)
`
`Lead lines cross each other. Figts)
`
`Lead lines missing. Fig.(s)
`14. NUMBERING 0F SHEETS OF DRAWINGS. 37 CFR 1.480)
`
`Sheets not numbered consecutively, and in Ababic numerals
`beginning with number 1. Fig.(s)
`15. NUMBERING 0F VIEWS. 37 CFR l.84(u)
`
`Views not numbered consecutively, and in Abrabic numerals.
`beginning with number I. Fig.(s)
`16. CORRECTIONS. 37 CFR tarttw)
`
`Corrections not made from PTO-948 dated
`17.DESIGN DRAWINGS. 37 CFR 1152
`
`Surface shading shown not appropriate. Fig.(s)
`
`Solid black shading not used for color contrast.
`Fig.(s)
`
`COMMENTS
`
`c
`REVIEWER
`I
`
`m w,“- «aaggro. “
`
`.
`
`DATE; id
`
`a L
`6 TELEPHONENOL
`Arendi S.A.R.L. - Ex. 2006
`
`Page 4 of 4
`Arendi S.A.R.L. - Ex. 2005
`Page 4 of 4
`
`\
`
`Arendi S.A.R.L. - Ex. 2006
`Page 4 of 4
`
`