`
`UNITED STATES PATENT AND TRADEMARK OFFICE
`
`
`
`
`
`BEFORE THE PATENT TRIAL AND APPEAL BOARD
`
`
`
`
`
`SAMSUNG ELECTRONICS CO., LTD
`
`Petitioner
`
`v.
`
`DSS TECHNOLOGY MANAGEMENT, INC.
`Patent Owner
`
`
`
`
`
`
`
`
`U.S. Patent No. 5,652,084
`
`Title: METHOD FOR REDUCED PITCH LITHOGRAPHY
`
`
`
`
`
`Inter Partes Review No. IPR2014-__________
`
`
`
`PETITION FOR INTER PARTES REVIEW OF
`U.S. PATENT NO. 5,652,084
`CHALLENGING CLAIMS 1-16
`
`
`
`
`
`
`
`
`
`
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`TABLE OF CONTENTS
`
`I.
`Introduction ...................................................................................................... 1
`II. Mandatory Notices ........................................................................................... 1
`A.
`Real Party-in-Interest ............................................................................ 1
`B.
`Related Matters ...................................................................................... 1
`C.
`Lead and Back-up Counsel and Service Information ........................... 2
`III. Grounds for Standing ....................................................................................... 2
`IV. Relief Requested .............................................................................................. 2
`V.
`Summary of the 084 Patent ............................................................................. 3
`A.
`Summary of the Related Technology and the 084 Patent ..................... 3
`B.
`The Prosecution History ........................................................................ 6
`C.
`Claim Construction ............................................................................... 9
`1.
`Imaging Layer ............................................................................. 9
`2.
`Stabilizing ................................................................................. 10
`3.
`Single Patterned Layer .............................................................. 11
`4.
`Disposable Post ......................................................................... 11
`5.
`PRIST ........................................................................................ 12
`6.
`Second Feature Distinct From the First Feature ....................... 13
`VI. The Prior Art of the Present Petition ............................................................. 14
`A. Anticipation References ...................................................................... 14
`1.
`Jap. Patent App. No. HEI 4[1992]-71222 (“Jinbo”)
`(Samsung-1013) (English Translation Samsung-1005)............ 14
`2.
`U.S. Patent No. 5,667,940 (“Hsue”) (Samsung-1006) ............. 16
`Obviousness Combination References ................................................ 19
`1. McColgin (U.S. Patent No. 4,931,351) (Samsung-1007) ......... 19
`2. Matthews (U.S. Patent No. 4,548,688) (Samsung-1008) ......... 20
`3.
`Cooper (U.S. Patent No. 5,158,910) (Samsung-1009) ............. 22
`VII. Identification of Challenges ........................................................................... 23
`A.
`Challenged Claims .............................................................................. 23
`
`B.
`
`
`
`
`
`
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`D.
`
`2.
`
`3.
`
`4.
`
`B.
`Statutory Grounds for Challenges ....................................................... 23
`C. Obviousness Rationales ....................................................................... 24
`1.
`Substitution of Known Stabilization Techniques to
`Obtain Predictable Results (Claims 8, 9, 10, and 11) ............... 24
`2. Motivation to Combine the Prior Art References to Use
`the Patterned Photoresist as a Disposable Post (Claims 13
`and 14) ....................................................................................... 26
`Challenges ........................................................................................... 27
`1.
`#1: Claims 1-8, 12, and 15-16 are anticipated under §
`102(b) by Jinbo ......................................................................... 27
`#2: Claim 9 is obvious under § 103(a) over Jinbo in view
`of McColgin .............................................................................. 39
`#3: Claims 10 and 11 are obvious under § 103(a) over
`Jinbo in view of Matthews ........................................................ 40
`#4: Claims 13 and 14 are obvious under § 103(a) over
`Jinbo in view of Cooper ............................................................ 42
`#5: Claims 1-7, 10, 12, and 15-16 are anticipated under §
`102(e) by Hsue .......................................................................... 46
`#6: Claim 8 is obvious under § 103(a) over Hsue in view
`of Jinbo ...................................................................................... 56
`#7: Claim 9 is obvious under § 103(a) over Hsue in view
`of McColgin .............................................................................. 56
`#8: Claim 11 is obvious under § 103(a) over Hsue in
`view of Matthews ...................................................................... 57
`#9: Claims 13 and 14 are obvious under § 103(a) over
`Hsue in view of Cooper ............................................................ 58
`VIII. Conclusion ..................................................................................................... 60
`
`
`
`5.
`
`6.
`
`7.
`
`8.
`
`9.
`
`
`
`
`
`ii
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`SAMSUNG’S EXHIBIT LIST
`
`September 12, 2014
`
`The 084 Patent, U.S. Patent No. 5,652,084
`
`Prosecution History of U.S. Patent No.
`5,652,084
`
`IBM Technical Disclosure, volume 32,
`number 8A (January 1990) (Disclosure 1)
`
`The 061 Patent, U.S. Patent No. 5,710,061
`
`Jinbo, Japanese Patent App. No. 04-71222
`(English Translation with Certification)
`
`Hsue, U.S. Patent No. 5,667,940
`
`McColgin, U.S. Patent No. 4,931,351
`
`Matthews, U.S. Patent No. 4,548,688
`
`Cooper, U.S. Patent No. 5,158,910
`
`W.H.-L. Ma., Plasma Resist Image
`Stabilization Technique (PRIST), IEEE
`Electron Devices Meeting, 1980 International,
`vol. 26, pp. 574-76, 1980
`
`Declaration of Bruce Smith
`
`Curriculum Vitae of Bruce Smith
`
`Jinbo, Japanese Patent App. No. 04-71222
`
`Samsung-1001
`
`Samsung-1002
`
`Samsung-1003
`
`Samsung-1004
`
`Samsung-1005
`
`Samsung-1006
`
`Samsung-1007
`
`Samsung-1008
`
`Samsung-1009
`
`Samsung-1010
`
`Samsung-1011
`
`Samsung-1012
`
`Samsung-1013
`
`
`
`iii
`
`
`
`
`
`
`I.
`
`INTRODUCTION
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`Pursuant to the provisions of 35 U.S.C. §§ 311-319, Petitioner Samsung
`
`Electronics Co., Ltd. (“Samsung”) hereby petitions the Patent Trial and Appeal
`
`Board to institute an inter partes review of claims 1-16 (all claims) of United
`
`States Patent No. 5,652,084 (“the 084 Patent,” Samsung-1001) that issued on July
`
`29, 1997, to James M. Cleeves. According to USPTO records, the 084 Patent is
`
`currently assigned to DSS Technology Management, Inc. The 084 Patent is
`
`currently the subject of the petition for inter partes review by Taiwan
`
`Semiconductor Manufacturing Company, Ltd., IPR2014-01030 (“IPR-1030”),
`
`filed on June 24, 2014. This petition includes challenges based on the same
`
`primary reference as IPR-1030 (Japanese Patent Application No. HEI 4[1992]-
`
`71222 (“Jinbo”) (Samsung-1013) as well as challenges based on an additional
`
`primary reference (U.S. Patent No. 5,667,940 (“Hsue”)) (Samsung-1006).
`
`II. MANDATORY NOTICES
`A. Real Party-in-Interest
`
`The real party in interest is Samsung.
`
`B. Related Matters
`
`As of the filing date of this petition and to the best knowledge of Samsung, the
`
`084 Patent is involved in the following litigation: (1) Petition for Inter Partes
`
`Review by Taiwan Semiconductor Manufacturing Company, Ltd., IPR2014-
`
`
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`01030, filed on June 24, 2014; and (2) DSS Technology Mgmt., Inc. v. Taiwan
`
`Semiconductor Manufacturing Company, Ltd. et al., 2-14-CV-00199 (EDTX).
`
`C. Lead and Back-up Counsel and Service Information
`
`Back-up Counsel
`Lead Counsel
`Brian E. Ferguson
`Christopher T. Marando
`Weil, Gotshal & Manges LLP
`Weil, Gotshal & Manges LLP
`1300 Eye Street NW, Suite 900
`1300 Eye Street NW, Suite 900
`Washington, DC 20005-3314
`Washington, DC 20005-3314
`Phone: (202) 682-7516
`Phone: (202) 682-7094
`Fax: (202) 857-0940
`Fax: (202) 857-0940
`brian.ferguson@weil.com
`christopher.marando@weil.com
`USPTO Customer No. 506499
`USPTO Customer No. 506499
`USPTO Reg. No. 36,801
`USPTO Reg. No. 67,898
`Please address all correspondence to lead and back-up counsel. Samsung also
`
`
`
`consents to electronic service by email.
`
`III. GROUNDS FOR STANDING
`Samsung certifies that the 084 Patent for which review is sought is available for
`
`inter partes review and that Samsung is not barred or estopped from requesting
`
`inter partes review challenging the patent claims on the grounds identified in the
`
`petition.
`
`IV. RELIEF REQUESTED
`Samsung asks that the Board review the accompanying prior art and analysis,
`
`institute a trial for inter partes review of claims 1-16 (all claims) of the 084 Patent,
`
`and cancel those claims as unpatentable.
`
`
`
`
`
`2
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`V.
`
`SUMMARY OF THE 084 PATENT
`
`The full statement of the reasons for the relief requested is as follows:
`
`A. Summary of the Related Technology and the 084 Patent1
`
`Photolithography (or “lithography”) is the use of light or other radiation to form
`
`a pattern in a material. Photolithographic techniques are commonly used in
`
`semiconductor fabrication to form the minute features of modern integrated circuit
`
`devices. As the 084 Patent describes, a typical photolithography process involves
`
`depositing photoresist over a layer of material to be patterned, exposing the
`
`photoresist to ultraviolet radiation through a mask, developing the photoresist to
`
`form a patterned photoresist layer over the layer of material to be patterned, and
`
`subsequently utilizing the patterned photoresist layer to etch the underlying layer to
`
`be patterned. See Samsung-1001, 084 Patent at 1:19-27.
`
`Driven in part by the demand for smaller and more efficient devices, circuit
`
`fabrication presses the limits of photolithography, and many circuit features are
`
`sized at or near the minimum lithographic resolution. The 084 Patent recognizes
`
`the limits imposed by conventional lithography and the potential for alleged
`
`lithographic improvements to enable the fabrication of integrated circuit devices
`
`with relatively smaller sizes. Samsung-1001, 084 Patent at 1:14-35, 12:28-38.
`
`
`1 The following description of the 084 Patent and the related technology is
`substantially similar to the description provided in IPR-1030.
`
`
`
`
`
`3
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`The 084 Patent is particularly concerned with reducing the spacing between
`
`adjacent features (i.e., photoresist shapes) in a single patterned layer of photoresist.
`
`To reduce the spacing, the 084 Patent describes that a single patterned layer of
`
`photoresist is formed through two exposures to radiation. In particular, the 084
`
`Patent teaches that a first layer of photoresist (imaging layer 220) is formed over a
`
`material layer 210 and exposed using a lithographic mask as shown in FIG. 2,
`
`reproduced below.
`
`
`
`
`The 084 Patent states that “[t]he radiation serves to render soluble in a suitable
`
`developer that portion of imaging layer 220 exposed to radiation through clear
`
`features 221 and 223,” while the “portion of imaging layer 220 that has not been
`
`exposed to radiation remains relatively insoluble in the developer.” Samsung-
`
`1001, 084 Patent at 3:66-4:4. The first imaging layer 220 is then developed,
`
`leaving a first patterned layer 232 with a photoresist feature as shown in FIG. 3,
`
`reproduced below.
`
`
`
`
`
`4
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`
`The first patterned layer 232 is “stabilized” before applying the second resist. With
`
`
`
`
`
`respect to this stabilization, the 084 Patent teaches the following:
`
`First patterned layer 232 may be stabilized to withstand subsequent
`lithographic processing steps. First patterned layer 232 may be
`stabilized to withstand chemical transformation as a result of any
`subsequent exposure to radiation, for example. First patterned layer
`232 may also be stabilized to withstand dissolution by solvents during
`a subsequent spin-on of photoresist, for example. First patterned layer
`232 may further be stabilized to withstand dissolution by a
`subsequent developer, for example.
`Samsung-1001, 084 Patent at 4:34-42 (emphasis added). After the first patterned
`
`layer 232 has been stabilized, a second resist (second imaging layer 240) is formed
`
`over the first patterned layer 232 and exposed in a lithographic process. The
`
`second imaging layer 240 is then developed, which leaves some photoresist
`
`features from the first imaging layer (e.g., feature 232) and some photoresist
`
`features (e.g., features 251 and 253) from the second imaging layer. This is shown
`
`in FIGS. 4 and 5, reproduced below.
`
`
`
`
`
`5
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`
`
`
`
`The 084 Patent refers to this structure having adjacent features from two different
`
`imaging layers as a “single patterned layer.” Samsung-1001, 084 Patent at 7:36-
`
`40. Subsequent processing, such as etching layer 210, takes advantage of the shape
`
`of the remaining features within the single patterned layer to process portions of
`
`the underlying layers selectively. Alternatively, the features of single patterned
`
`layer could be utilized as a disposable post (described below). The 084 Patent
`
`teaches that “features for the resulting single patterned layer, such as the patterned
`
`layer illustrated in FIGS. 5, 11, and 16 respectively, may be formed relatively
`
`closer to one another” when compared with a single exposure process. Samsung-
`
`1001, 084 Patent at 12:28-34.
`
`B. The Prosecution History
`
`The 084 Patent issued on July 29, 1997, from U.S. Patent App. No. 08/740,145
`
`(“the 145 Application”), filed by James M. Cleeves on October 22, 1996. The 084
`
`Patent is a continuation of U.S. Patent Application No. 08/361,595 (“the 595
`
`Application”), filed on December 22, 1994 (now abandoned). The file wrapper of
`
`
`
`
`
`6
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`the 595 Application was used as the basis for 145 Application, and the 145
`
`Application includes all amendments made to the 595 Application. During
`
`prosecution of the 595 Application, the claims were repeatedly rejected in view of
`
`the prior art. Of particular interest, Applicant amended claim 1 to recite, for
`
`example, “a first patterned layer having a first feature” and “a second patterned
`
`layer having a second feature distinct from the first feature,” “wherein the first and
`
`second features which are formed relatively closer to one another than is possible
`
`through a single exposure to radiation.” Samsung-1002 at pp. 129-30, Applicant’s
`
`Amendment dated 9-24-1996 at pp. 1-2. Regarding the “second feature distinct
`
`from the first feature,” Applicant’s amendments were made to distinguish IBM
`
`Technical Disclosure, volume 32, number 8A (January 1990) (Disclosure 1). For
`
`reference, the features of Disclosure 1 relating to Applicant’s arguments are shown
`
`below:
`
`
`Samsung-1003, Disclosure 1, Fig. 1
`
`Further, Disclosure 1 provides the following description of Figure 1:
`
`[A] first photoresist layer 2 is deposited on substrate 4. Openings
`having width A and width B are formed in photoresist 2 by exposure
`to a first mask and development. Remaining photoresist 2 is then
`
`
`
`
`
`7
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`hardened, e.g., by a heat treatment. Next, photoresist 6 is applied and
`exposed to a second mask whereupon an opening having width C is
`created by exposure and development. A patterned defined by
`coincidence of openings having width A and C (D) can then be etched
`in substrate 4.
`
`Samsung-1003, Disclosure 1, at 219. Applicant distinguished Disclosure 1 as
`
`follows:
`
`Disclosure 1 forms overlapping openings A, C, D, and E in order to
`incorporate three sets of patterns in two photomasking steps. Thus,
`Disclosure 1 teaches away from amended claim 1, because openings
`A, C, D, and E are overlapping non-distinct features … There is no
`teaching in Disclosure 1 to motivate A POSITA in the art to perform a
`subsequent patterning of photoresist 6 to form a second distinct
`feature which is relatively closer to openings A or B than is possible
`through a single exposure to radiation. Furthermore, there is no
`teaching in Disclosure 1 that openings C, D, or E are formed relatively
`closer to opening B than is possible in a single exposure to radiation.
`
`Samsung-1002 at pp. 132-33, Applicant’s Amendment dated 9-24-1996 at pp. 4-5
`
`(emphasis added). Applicant’s amendments were received but not entered in the
`
`prosecution of the 595 Application. However, upon being entered in the 145
`
`Application, the Examiner allowed the claims, stating that Disclosure 1 “does not
`
`teach the formation of two distinct features in the two layers,” and a second cited
`
`reference “forms two distinct patterns in two different layers[,] but the patterns are
`
`not formed closer to one another than possible in a single exposure.” Samsung-
`
`
`
`
`
`8
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`1002 at pp. 157-58, Notice of Allowance dated 2-10-1997 at pp. 2-3. Thus, in light
`
`of Applicant’s arguments and the Examiner’s reasons for allowance, the “second
`
`feature distinct from the first feature” requires that the second feature be spatially
`
`separated from the first feature on the x axis.
`
`C. Claim Construction
`
`For a non-expired patent, a claim subject to an IPR is interpreted in a manner
`
`that is consistent with the broadest reasonable interpretation in light of the
`
`specification. See 37 C.F.R. § 42.100(b). This means that the words of the claim
`
`are given their plain meaning unless that meaning is inconsistent with the
`
`specification. In re Zletz, 893 F.2d 319, 321 (Fed. Cir. 1989). For expired patents,
`
`the claims are interpreted in accordance with the principles outlined in Phillips v.
`
`AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). See In re Rambus, Inc., 753
`
`F.3d 1253, 1256 (Fed. Cir. 2014). The 084 Patent will expire on December 22,
`
`2014, which may occur prior to the Board’s institution decision. Accordingly, this
`
`petition proposes constructions below consistent with the standard for both non-
`
`expired and expired patents. These constructions are proposed for the sole purpose
`
`of this petition and to comply with 37 C.F.R. §§ 42.100(b) and 42.104(b)(3).
`
`1.
`
`Imaging Layer
`
`The claims recite first and second imaging layers. According to the 084 Patent,
`
`an imaging layer may include “a suitable positive photoresist,” “a suitable negative
`
`
`
`
`
`9
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`photoresist,” “a suitable radiation-sensitive polyimide,” or “other suitable
`
`radiation-sensitive materials.” Samsung-1001, 084 Patent at 3:34-42. Accordingly,
`
`the term imaging layer should be construed to mean a photoresist or other
`
`radiation-sensitive material. See Samsung-1011, Smith Decl. ¶ 32.
`
`2.
`
`Stabilizing
`
`The claims refer to stabilizing the first patterned layer. The 084 Patent discloses
`
`stabilizing a patterned imaging layer “to withstand subsequent lithographic
`
`processing steps.” Samsung-1001, 084 Patent at 4:34-35. As described above, the
`
`084 Patent states that the first patterned layer “may” be stabilized to withstand
`
`“chemical transformation as a result of any subsequent exposure to radiation,”
`
`“dissolution by solvents,” or “dissolution by a subsequent developer.” See
`
`Samsung-1001, 084 Patent at 4:35-42 (emphasis added). These three examples are
`
`repeated throughout the specification. See, e.g., Samsung-1001, 084 Patent at 5:12-
`
`22, 5:32-36, 8:51-57. Thus, the term stabilizing means performing a process that
`
`renders a material able to withstand subsequent processing steps, such as
`
`exposure to radiation, exposure to a solvent, or exposure to a developer.2 See
`
`Samsung-1011, Smith Decl. ¶ 33.
`
`
`2 To the extent the Board finds that stabilizing requires rendering the material able
`to withstand all three subsequent processing steps, this is disclosed by both primary
`references discussed below as well as each of the combination references for the
`dependent claims concerning stabilization. See also Samsung-1011, Smith Decl. ¶
`40.
`
`
`
`
`10
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`3.
`
`Single Patterned Layer
`
`The claims recite that “the second patterned layer and the first patterned layer
`
`form a single patterned layer.” The 084 Patent teaches that “[t]his single patterned
`
`layer is formed from the patterning of imaging layer 220 and the subsequent
`
`patterning of imaging layer 240,” Samsung-1001, 084 Patent at 7:36-40. This is
`
`illustrated in FIG. 5 of the 084 Patent, reproduced below.
`
`
`FIG. 5 shows that the single patterned layer is one layer that includes features
`
`
`
`from the first patterned layer (e.g., feature 232) and features from the second
`
`patterned layer (e.g., features 251 and 253). Thus, the recited single patterned layer
`
`should be construed to mean a single layer of patterned features, which may be
`
`formed from one or more imaging layers. See Samsung-1011, Smith Decl. ¶ 35.
`
`4.
`
`Disposable Post
`
`Claim 13 recites “patterning the first imaging layer in accordance with a first
`
`pattern to form a first patterned layer having a first disposable post.” The
`
`specification of the 084 Patent discloses that “disposable posts are removed to
`
`form openings for a subsequent layer, such as a contact, via, or interconnect layer
`
`for example” and refers to U.S. App. No. 08/179,615 for more details. Samsung-
`
`1001, 084 Patent at 12:53-62. U.S. App. No. 08/179,615 issued (through a
`
`
`
`
`11
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`continuation) as U.S. Patent No. 5,710,061 (Samsung-1004, the “061 Patent”).
`
`Samsung-1004, 061 Patent. The 061 Patent describes a post as a patterned
`
`material—such as a photoresist—that may be surrounded by a second material.
`
`The post may then be removed to form an opening in the second material.
`
`Samsung-1004, 061 Patent at 2:43-49. In the embodiments of Figs. 2A-2E, the 061
`
`Patent teaches “photosensitive material 220 has been patterned to form post 221
`
`over diffusion region 201 so as to later form a contact opening in an insulative
`
`layer to be formed over the surface of the wafer.” Samsung-1004, 061 Patent at
`
`5:39-42.
`
`
`Samsung-1004, 061 Patent, FIG. 2C
`
`Thus, the term disposable post should be construed to mean a patterned feature
`
`
`
`that may be surrounded by another layer of material, and that may be removed to
`
`define an opening such as a contact, via, or interconnect layer opening. See
`
`Samsung-1011, Smith Decl. ¶ 37.
`
`5.
`
`PRIST
`
`Claim 8 requires stabilization through a PRIST technique. The specification of
`
`the 084 Patent discloses that “[a]s one example, a pirst [sic] technique may be used
`
`to form a carbon fluorine (CF4) skin over first patterned layer 232 by exposing the
`
`
`
`
`12
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`photoresist to a fluorine ambient.” Samsung-1001, 084 Patent at 4:67-5:3. Plasma
`
`Resist Image Stabilization Technique (or PRIST) was a well-known technique for
`
`stabilizing photoresist in use since at least the early 1980s. See, e.g., Samsung-
`
`1010, W.H.-L. Ma., Plasma Resist Image Stabilization Technique (PRIST), IEEE
`
`Electron Devices Meeting, 1980 Int’l, vol. 26, pp. 574-75, 1980. Thus, a PRIST
`
`technique should be construed as a Plasma Resist Image Stabilization Technique,
`
`including techniques such as the fluorine plasma stabilization described in the
`
`084 Patent. See Samsung-1011, Smith Decl. ¶ 38.
`
`6.
`
`Second Feature Distinct From the First Feature
`
`Claim 1 requires that the second patterned layer have “a second feature distinct
`
`from the first feature.” The term “distinct” is not defined in the specification. As
`
`discussed above, this term was added during prosecution to distinguish the prior
`
`art. Specifically, Applicant added this limitation to distinguish Disclosure 1’s
`
`“overlapping non-distinct features.” See Samsung-1002 at pp. 132-33, Applicant’s
`
`Remarks dated 9-24-1996, at pp. 4-5. Meanwhile, dependent claim 12 requires that
`
`“the first and second features do not overlap.” Notwithstanding claim 12,
`
`Applicant’s arguments during prosecution overcome any claim differentiation
`
`argument that the first and second features may overlap. Thus, in view of the
`
`Applicant’s arguments, a second feature distinct from the first feature is a second
`
`patterned feature that is spatially separated from the first feature on the x axis.
`
`
`
`
`13
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`This is also consistent with the plain meaning of a “distinct” feature. See Samsung-
`
`1011, Smith Decl. ¶ 39.
`
`VI. THE PRIOR ART OF THE PRESENT PETITION
`A. Anticipation References
`
`1.
`
`Jap. Patent App. No. HEI 4[1992]-71222 (“Jinbo”) (Samsung-
`1013) (English Translation Samsung-1005)3
`
`Jinbo is directed to a double patterning technique for forming shapes that are
`
`closer than is possible using a comparable single exposure technique. Further
`
`reference is made to a certified English translation of the published Japanese Patent
`
`Application (Samsung-1005, “Jinbo”). Just like the 084 Patent, Jinbo recognizes
`
`that single patterning techniques have been limited by the minimum resolvable
`
`distance, an optical property of a photolithographic system. In order to reduce
`
`device spacing beyond this resolution limit, Jinbo discloses exposing and
`
`developing a first resist to form a first resist pattern. The first resist is then exposed
`
`to a plasma to fix the resist and render it “insoluble” to the solvents and developers
`
`used in forming subsequent resists (examples 2 and 3 of subsequent processing
`
`steps described in the 084 Patent). Specifically, Jinbo discloses a PRIST
`
`technique—i.e., exposing the first resist to a fluorine-containing plasma. See
`
`Samsung-1005, Jinbo at p. 5; Samsung-1011, Smith Decl. ¶ 45. Thus, Jinbo’s
`
`
`3 The following description of Jinbo is substantially similar to the description
`provided in IPR-1030.
`
`
`
`
`14
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`insoluble-ization process is describing stabilization as that term is used in the 084
`
`Patent because it allows the first photoresist layer to withstand subsequent
`
`processing steps, such as exposure to a solvent and/or exposure to a developer. In
`
`addition, a person of ordinary skill in the art (“POSITA”) would understand that
`
`such a technique would also make the resist able to withstand subsequent exposure
`
`to radiation, the third and final exemplary processing step. Samsung-1011, Smith
`
`Decl. ¶ 45. Thus, the stabilization described in Jinbo enables the photoresist to
`
`withstand all three subsequent processing steps described in the 084 Patent. To the
`
`extent that DSS argues that Jinbo’s and the 084 Patent’s processes are different,
`
`using a stabilization process as recited in the claims would have been obvious.
`
`A second resist is then formed on the patterned first resist. The second resist is
`
`exposed and developed to form a second resist pattern interleaved with the first
`
`resist pattern. The two resist patterns are then used to etch an underlying material
`
`layer. Jinbo discloses that this technique provides reduced shape spacing than
`
`single resist techniques using the same lithographic system. To compare the 084
`
`Patent and Jinbo, FIG. 5 from the 084 Patent is reproduced below next to FIG. 1(e)
`
`from Jinbo. As annotated, both figures show a single patterned layer with a first
`
`feature from a first patterned layer and a second feature from a second patterned
`
`layer that is distinct from the first feature, as recited in claim 1 of the 084 Patent.
`
`
`
`
`
`
`15
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`
`
`Claim 1 also recites that the first and second features ... are formed relatively
`
`closer to one another than is possible through a single exposure to radiation. Jinbo
`
`discloses the same thing: “[W]hen the resolution limit is 0.4 µm, a 0.3 µm line and
`
`space pattern, which exceeds the resolution limit of the system, can be obtained by
`
`applying the pattern forming method of this invention to the system.” Samsung-
`
`1005, Jinbo at p. 6.
`
`2.
`
`U.S. Patent No. 5,667,940 (“Hsue”) (Samsung-1006)
`
`The application that led to the issuance of Hsue was a continuation of an
`
`application filed on May 11, 1994. Therefore, Hsue is prior art to the 084 Patent
`
`under 35 U.S.C. § 102(e). Hsue was not identified to the Examiner during the
`
`prosecution of the 084 Patent. Hsue discloses that a layer 12 to be etched is
`
`deposited over a substrate 10. A first layer of photoresist is deposited over the layer
`
`to be etched, patterned using a mask, and developed to produce a first patterned
`
`layer 14. The resulting first patterned layer 14 has openings of the size R+2M,
`
`
`
`
`16
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`where R is the line width and M is the misalignment tolerance. See Samsung-1006,
`
`Hsue at 2:19-37. The first patterned layer 14 is shown in Figure 2.
`
`
`
`Subsequently, the first patterned layer is baked (i.e., heated) using an ultraviolet
`
`
`
`(UV) baking process at a temperature between about 140° to 160°C to prevent it
`
`from being removed during subsequent development steps. See Samsung-1006,
`
`Hsue at 2:38-42; 2:48-50. Thus, the first patterned layer is stabilized to withstand
`
`subsequent developers (example 3) by simultaneously heating the layer as well as
`
`exposing it to UV radiation. A POSITA would know that, so long as the UV
`
`radiation is in the sub-320 nm range4, the UV radiation would also cause the
`
`photoresist to crosslink. See Samsung-1011, Smith Decl. ¶ 47 (citing Samsung-
`
`1008, Matthews at 3:57-61). A POSITA would also know that when photoresist
`
`“crosslinks,” it becomes able to withstand to radiation, solvents, and developers.
`
`Thus, the stabilization described in Hsue enables the photoresist to withstand all
`
`three subsequent processing steps described in the 084 Patent. See Samsung-1011,
`
`Smith Decl. ¶ 47.
`
`
`4 UV light has a wavelength between 10 nm and 400 nm. See Smith Decl. ¶ 47 n.4.
`
`
`
`
`17
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`A second photoresist layer is then deposited in the openings between the
`
`features of the first patterned layer. The second photoresist layer is patterned
`
`through a mask 20 and developed to produce a second patterned layer 18. See
`
`Samsung-1006, Hsue at 2:43-47. This is shown in Figure 3:
`
`
`
`
`Following development of the second patterned layer, the features of the first
`
`patterned layer (14) and the features of the second patterned layer (18) are distinct
`
`(i.e., spatially separated on the x axis) and combine to form a single patterned
`
`layer. This is shown in Figure 4:
`
`
`
`
`The resulting features of the single patterned layer are a distance M apart
`
`instead of a distance R as in the prior art. See Samsung-1006, Hsue at 2:51-53.
`
`Because M is much smaller than R, the spacing of the features is reduced
`
`dramatically through the use of the double exposure technique as compared to the
`
`prior art technique of a single exposure to radiation. See Samsung-1006, Hsue at
`
`2:53-55. See also Samsung-1006, Hsue at 1:22-31 (describing the prior art
`
`
`
`
`18
`
`
`
`Petition for Inter Partes Review of U.S. 5,652,084
`
`technique of patterning photoresist through a single exposure to radiation). A
`
`comparison between the result of the process of the 084 Patent and the process of
`
`Hsue is provided below:
`
`
`
`Dependent claim 10 requires that the stabilizing step of claim 1 include
`
`exposing the first patterned layer to radiation and heating the first patterned layer.
`
`This is disclosed in Hsue, but not Jinbo. Thus, Hsue is not cumulative because, as
`
`further described below, Hsue anticipates claim 10 while Jinbo does not.
`
`
`
`B. Obviousness Combination References
`
`1. McColgin (U.S. Patent No. 4,931,35