`
`
`Ex. PGS 1033
`EX. PGS 1033
`(EXCERPTED)
`(EXCERPTED)
`
`
`
`
`
`
`
`
`
`
`Marine Geophysics
`
`Ex. PGS 1033
`
`
`
`Marine Geophysics
`
`E. J. W. Jones
`University College London
`
`JOHN WILEY & SONS, LTD
`Chichester· New York· Weinheim · Brisbane· Singapore· Toronto
`
`Ex. PGS 1033
`
`
`
`Copyright© 1999 by John Wiley & Sons Ltd,
`Baffins Lane, Chichester,
`West Sussex P019 1UD, England
`
`01243 779777
`National
`( + 44) 1243 779777
`International
`e-mail (for orders and customer service enquiries): cs-books@wiley.co.uk
`Visit our Home Page on http://www.wiley.co.uk
`or http://www.wiley.com
`
`E. J. W. Jones has asserted his right under the Copyright, Designs and Patents Act 1988, to be
`identified as the author of this work.
`
`All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
`transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, scanning or
`otherwise, except under the terms of the Copyright, Designs and Patents Act 1988 or under the terms of
`a licence issued by the Copyright Licensing Agency, 90 Tottenham Court Road, London, UK W1P 9HE,
`without the permission in writing of John Wiley & Sons Ltd, Baffins Lane, Chichester, West Sussex,
`UK P019 lUD.
`
`Other Wiley Editorial Offices
`
`John Wiley & Sons, Inc., 605 Third Avenue,
`~ew York, NY 10158-0012, USA
`
`WILEY-VCH Verlag GmbH, Pappelallee 3,
`D-69469 Weinheim, Germany
`
`Jacaranda Wiley Ltd, 33 Park Road, Milton,
`Queensland 4064, Australia
`
`John Wiley & Sons (Asia) Pte Ltd, 2 Clementi Loop lf02-01,
`Jin Xing Distripark, Singapore 129809
`
`John Wiley & Sons (Canada) Ltd, 22 Worcester Road,
`Rexdale, Ontario M9W 1Ll, Canada
`
`Library of Congress Cataloging-in-Publication Data
`
`Jones, E.J.W.
`Marine geophysics / E.J.W. Jones.
`p. em.
`Includes bibliographical references and index.
`ISBN 0-471-98693-3 (alk. paper).-ISBN 0-471-98694-1 (alk.
`paper)
`l. Marine geophysics.
`QE50l.J585 1999
`551.46'084-dc21
`
`I. Title.
`
`98-47324
`CIP
`
`British Library Cataloguing in Publication Data
`
`A catalogue record for this book is available from the British Library
`
`ISBN 0 471 98693 3 (Q.ardback)
`0 471 98694 1 (paperback)
`
`Typeset in 9/11pt Times by Vision Typesetting, Manchester
`Printed and bound in Great Britain by Bookcraft (Bath) Ltd, Midsomer Norton
`This book is printed on acid-free paper responsibly manufactured from sustainable forestry,
`in which at least two trees are planted for each one used for paper production.
`
`Ex. PGS 1033
`
`
`
`Seismic exploration at sea: a theoretical background 89
`
`2
`Or-~------~------~------~-.
`
`1~1------------------~
`
`a. Depth model
`
`c. Partial depth migration
`
`05
`
`0.55
`
`1.05
`
`1.55
`
`b. Normal-incidence time section
`
`d. wave-theoretical depth migration
`
`Figure 4.24 Wave-theoretical depth migration. (a) Model structure, with P-wave velocities given in m s -I. The reflection
`coefficient between the 4880 m s- 1 and 4025 m s- 1 layers is zero. Reflection coefficients of all other interfaces are non-zero and
`identical. (b) Normal incidence time section calculated from the model structure. (c) Partial depth migration. Wave-theoretical
`migration has been carried out down to a source-receiver level of ~ 750 m, shown by the dashed line. The shallow section is fully
`migrated in depth. The section below the dashed line is the time section that would be recorded with the source and receiver at a
`depth of750m. (d) Section obtained from wave-theoretical migration of record (b) (courtesy of Western Geophysical).
`
`image seabed structure in more detail and with less
`ambiguity, many reflection surveys are carried out with
`a close grid of shot and receiver points spaced a few tens
`of metres apart so that seismic arrivals from a single
`point in the subsurface are recorded from different di(cid:173)
`rections as well as at different source-receiver offsets
`(Figure 4.25). Such dense acquisition in offshore regions
`has been made possible by the development of accurate
`navigation systems and the use of multiple sources in
`conjunction with several receiver arrays (Section 5.9.4).
`Seismic returns are grouped into small cells or bins, data
`being included in a particular bin if a mid-point falls
`within that area of the subsurface. Data from each bin
`can then be stacked and migrated to produce a three(cid:173)
`dimensional image of the subsurface.
`Typically, the edges of a subsurface bin are 12.5 m in
`the inline direction of the survey and 25m in the cross(cid:173)
`line. Digitization of the seismic trace at 2 ms provides a
`vertical sampling of 3m for an average subsurface vel(cid:173)
`ocity of 3 km s- 1. The bin size is chosen so a high
`
`resolution of the subsurface can be achieved and alias(cid:173)
`ing during processing avoided, but it should not be so
`small that many bins are empty. Data points in the
`volume should be separated by less than one-half of a
`seismic wavelength. If fmax is the highest seismic fre(cid:173)
`quency and IXmax is the maximum dip, then the maxi(cid:173)
`mum separation 8x, is (Sheriff and Geldart, 1995)
`
`v
`8x,<-----(cid:173)
`- 4 !max siniXmax
`
`(4.67)
`
`Data within each bin should contain the same num(cid:173)
`ber oftraces and the same uniform distribution of offsets
`but, in practice, the trace density is variable because the
`pattern of survey tracks is not ideal and also because of
`the presence of structural complexity in the subsurface.
`Traces for empty bins are normally generated by aver(cid:173)
`aging data from an adjacent part of the subsurface. In
`some processing procedures empty bins are allowed to
`expand, usually in the crossline direction, until they
`
`Ex. PGS 1033
`
`