`____________
`
`BEFORE THE PATENT TRIAL AND APPEAL BOARD
`____________
`
`CROSSROADS SYSTEMS, INC.
`Patent Owner
`
`____________
`
`Patent Nos. 6,425,035
`
`
`7,051,147
`
`
`7,934,041
`
`____________
`
`DECLARATION OF BRIAN BIANCHI
`
`1 of 5
`
` CROSSROADS EXHIBIT 2043
`Oracle Corp., et al v. Crossroads Systems, Inc.
` IPR2014-01207 and IPR2014-1209
`
`
`
`
`
`I, Brian Bianchi, state and declare as follows:
`
`1.
`
`I am an employee of Crossroads Systems, Inc.. I have been employed
`
`with Crossroads since June 1998. I am currently in the position of Chief Operating
`
`Officer. My knowledge of the facts stated here is based on my employment with
`
`Crossroads. To the extent I state or refer to any facts which are not based directly
`
`on my personal knowledge, they are based on my inspection of Crossroads’
`
`records. Those records, including those included or referenced in Exhibits A, B,
`
`and C, were made at or near the time the recorded act, event, condition, or opinion
`
`occurred. The records were made by someone with knowledge or from information
`
`transmitted by someone with knowledge. These records were kept in the course of
`
`Crossroads’ regularly conducted business activity. It was Crossroads’ regular
`
`practice to make these records. I am qualified to testify regarding Crossroads’
`
`record keeping practices because I am familiar with them through my employment
`
`with Crossroads.
`
`2.
`
`Attached as Exhibit A to my declaration are tables containing
`
`Crossroads’ shipment and sales information for its storage bridge and storage
`
`router products. The information in this spreadsheet represents Crossroads’
`
`business records for shipment and revenue for these products. I am using the term
`
`bridge herein to mean a storage appliance that provides one or more host
`
`
`
`
`
`2 of 5
`
`
`
`
`
`computers virtual local storage on remote storage devices using native, low-level
`
`block protocols, but without access controls. I am using the term router herein to
`
`mean a storage appliance with the same features as a bridge, but with the additional
`
`feature of access controls. By access controls I mean the ability to control (allow or
`
`deny) access from a host computer to the same storage available to another host
`
`computer.
`
`3.
`
`Exhibit A includes shipments and sales from fiscal year 1998 through
`
`fiscal year 2010. Crossroads began selling bridges in 1998. Crossroads first began
`
`selling routers in the fiscal fourth quarter of 1999. For each of Crossroads’
`
`products in Exhibit A, I have included a designation of whether the product is a
`
`bridge or router. Included are embedded routers/bridges. Embedded simply
`
`distinguishes standalone routers and bridges from routers or bridges contained on a
`
`separate circuit board, to be included inside another device. The functionality of
`
`standalone and embedded routers and bridges is the same.
`
`4.
`
`I have attached as Exhibit B graphs of the shipment and sales data
`
`contained in Exhibit A. Exhibits A and B show that, after the introduction of its
`
`router products with access controls, Crossroads’ bridge sales quickly dropped.
`
`5.
`
`Crossroads’ first routers were simply versions of its bridge products,
`
`but with access controls. For example, Crossroads’ 4250 Router was similar to the
`
`
`
`
`
`3 of 5
`
`
`
`
`
`Crossroads’ 4200 Bridge, but included access controls. In several instances,
`
`Crossroads sold bridge and router versions of essentially the same products—that
`
`is, virtually identical except for the inclusion of access controls and related
`
`features. This is true of the 6000-b bridge and 6000-Router, 6240-b bridge and
`
`6240-Router, and 7120-b bridge and 7120-Router. I have included as Exhibit C
`
`true and correct copies of multiple Crossroads product brochures which compare
`
`and contrast these bridge and router products. For a given product (e.g., the 6240)
`
`and the associated bridge and router versions (e.g., the 6240 Router vs. the 6240-b
`
`Bridge), a comparison of the product features shows that the primary differences
`
`between the two versions are the features related to access controls (the access
`
`controls themselves, the user defined maps, and dynamic mapping). See, e.g.,
`
`Exhibit C at CRDS 504194 (“Crossroads Storage Routers expand bridge
`
`functionality . . . . Storage resources are securely allocated using Crossroads’
`
`patented Access Controls . . . Users can configure, secure and manage up to eight
`
`custom device maps. Additionally, dynamic mapping allows immediate changes to
`
`custom maps without router reboot.”) and CRDS 504195 (providing Product
`
`Matrix showing the primary differences between the analogous bridge and router
`
`devices). The mapping features (user defined maps and dynamic mapping) are not
`
`necessary when access controls do not exist, because they relate to defining which
`
`hosts have access to what storage.
`
`
`
`
`
`4 of 5
`
`
`
`6.
`
`I also have personal knowledge of the differences between these
`
`products. Based on that knowledge and my experience at Crossroads, it is my
`
`impression that the increase in router sales over time, and the corresponding
`
`decrease in bridge sales, is due primarily to customer preference for a product
`
`having access controls.
`
`I declare under penalty of perjury under the laws of the United States of America
`
`that the foregoing is true and correct.
`
`
`Executed on: April L0 , 2015
`
`Kg,
`
`Brian Bianchi
`
`5 of 5
`
`