`
`_______________________
`
`BEFORE THE PATENT TRIAL AND APPEAL BOARD
`
`______________________
`
`GLOBAL FOUNDRIES U.S., INC., GLOBALFOUNDRIES DRESDEN
`MODULE ONE LLC & CO. KG, GLOBALFOUNDRIES DRESDEN MODULE
`TWO LLC & CO. KG, and THE GILLETTE COMPANY,
`
`Petitioners
`
`v.
`
`ZOND, LLC
`Patent Owner
`
`______________________
`Case No. IPR2014-010991
`
`Patent 7,604,716 B2
`
`______________________
`
`
`
`DECLARATION OF LARRY D. HARTSOUGH, PH.D.
`
`
`
`
`
`
`
`
`
`
`1 Case IPR 2014-00972 has been joined with the instant proceeding.
`
`Gillette et al. v. Zond
`IPR2014-01099 Zond Ex. 2004
`
`
`
`
`
`Table of Contents
`
`I. Education and Professional Background .............................................................. 1
`
`II. Summary ............................................................................................................. 5
`
`III. Legal Standards ............................................................................................... 10
`
`
`A. Level of Ordinary Skill in the Art. ................................................................ 10
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`IV. Background TOPICS ....................................................................................... 15
`
`
`B. Claim Interpretation. ..................................................................................... 11
`
`C. Legal Standards for Anticipation. ................................................................. 13
`
`D. Legal Standards for Obviousness. ................................................................. 14
`
`A. Voltage, current, impedance and power. ....................................................... 17
`
`B. Control systems. ............................................................................................ 19
`
`C. Set point (Controlled Parameter). ................................................................. 22
`
`D. Power Control vs. Voltage Control. .............................................................. 23
`
`E. Plasmas. ......................................................................................................... 25
`
`F. Plasma ignition. ............................................................................................. 27
`
`G. High-Density Plasmas. .................................................................................. 29
`
`
`V. Scope and content of The prior art. ................................................................... 35
`
`
`A. Wang. ............................................................................................................ 35
`
`B. Kudryavtsev. ................................................................................................. 45
`
`C. Mozgrin. ........................................................................................................ 55
`
`ii
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`D. Lantsman. ...................................................................................................... 56
`
`
`VI. Claim Analysis vis-à-vis the Cited References ............................................... 57
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`A. Wang Does Not Anticipate the Invention Claimed in the ’716 Patent. ........ 57
`
`B. Wang Does Not Teach a Power Supply Generating “a constant power,” as
`recited in Dependent Claim 4. ............................................................................. 62
`
`C. Wang Does Not Teach a Power Supply Generating “a constant voltage,” as
`recited in Dependent Claim 5. ............................................................................. 63
`
`D. Wang Does Not Teach a Power Supply “supplying power to the weakly-
`ionized plasma at a time that is between about fifty microseconds and five
`seconds after the ionization source generates the weakly-ionized plasma,” as
`recited in Dependent Claim 6. ............................................................................. 65
`
`E. Wang Does Not Teach the Power Supply Supplying “power to the weakly
`ionized plasma for a duration that is sufficient to generate a quasi-static electric
`field,” as Recited in Dependent Claim 7. ............................................................ 66
`
`F. It Would Not Have Been Obvious To Combine the Teachings of Wang and
`Lantsman To Achieve the Invention Recited in Claims 12 and 13 of the ’716
`Patent. .................................................................................................................. 67
`
`G. It Would Not Have Been Obvious To Combine the Teachings of Wang and
`Kudryavtsev To Achieve the Invention Claimed in the ’716 Patent. .................. 69
`
`H. The Combination of Wang and Kudryavtsev Does Not Suggest The
`Invention Recited in Independent Claims 14 and 26. .......................................... 73
`
`I. The Combination of Wang and Kudryavtsev Does Not Suggest Supplying the
`Electric Pulse Comprises “ applying a quasi-static electric field,” as Recited in
`Dependent Claim 21. ........................................................................................... 77
`
`J. The Combination of Wang and Kudryavtsev Does Not Suggest That Either of
`“a rise time and magnitude of the electrical pulse” is “selected to increase an
`density of the weakly-ionized plasma,” as Recited in Dependent Claim 16. ...... 78
`
`K. The Combination of Wang and Kudryavtsev Does Not Suggest That Either of
`“a rise time and magnitude of the electrical pulse” is “selected to excite atoms in
`
`iii
`
`
`
`
`
`
`
`
`the weakly-ionized plasma to generate secondary electrons that increase an
`ionization rate of the weakly-ionized plasma,” as Recited in Dependent Claim 17
`or “increase an ionization rate of the excited atoms in the weakly-ionized
`plasma,” as Required by Dependent Claim 30. ................................................... 79
`
`L. The Combination of Wang and Kudryavtsev Does Not Suggest a Cathode
`that is Positioned Adjacent to the Anode “form[ing] a gap there between,” as
`Recited in Claim 28. ............................................................................................ 80
`
`M. The Combination of Wang and Kudryavtsev Does Not Suggest “a dimension
`of the gap between the anode and the cathode is chosen to increase an ionization
`rate of the excited atoms in the weakly-ionized plasma,” as Required by
`Dependent Claim 29. ........................................................................................... 81
`
`
`
`
`
`
`
`N. It Would Not Have Been Obvious To Combine the Teachings of Wang,
`Kudryavtsev, and Mozgrin To Achieve the Invention Claimed in the ’716
`Patent. .................................................................................................................. 83
`
`
`VII. DECLARATION ........................................................................................... 88
`
`
`
`
`
`
`iv
`
`
`
`
`
`
`
`
`I, Larry D. Hartsough, do hereby declare:
`
`1.
`
`I am making this declaration at the request of patent owner Zond, LLC, in
`
`connection with the Inter Partes Reviews (IPRs) of U.S. Patent No. 7,604,716 (the
`
`“‘716 patent”), set forth in the above caption.
`
`2.
`
`I am being compensated for my work in this matter at the rate of $300 per
`
`hour. I have no interest in the ‘716 patent and my compensation in no way
`
`depends on the outcome of this proceeding.
`
`3.
`
`In forming the opinions set forth in this declaration I reviewed a number of
`
`materials, including the ‘716 patent, the file history of the ‘716 patent, the Petitions
`
`for Inter Partes Review and the cited references discussed below, the Patent Trial
`
`and Appeal Board’s (PTAB’s) Institution Decisions in these IPR proceedings, the
`
`transcript of the deposition of Dr. Uwe Kortshagen concerning the ‘716 patent, and
`
`the additional materials discussed herein.
`
`
`
`I. EDUCATION AND PROFESSIONAL BACKGROUND
`4. My formal education is as follows. I received a Bachelors of Science degree
`
`in 1965, Master of Science degree in 1967, and Ph.D. in 1971, all in Materials
`
`Science/Engineering from the University of California, Berkeley.
`
`
`
`
`
`
`1
`
`
`
`
`
`
`
`5.
`
`I have worked in the semiconductor industry for approximately 30 years. My
`
`experience includes thin film deposition, vacuum system design, and plasma
`
`processing of materials. I made significant contributions to the development of
`
`magnetron sputtering hardware and processes for the metallization of silicon
`
`integrated circuits. Since the late 1980s, I have also been instrumental in the
`
`development of standards for semiconductor fabrication equipment published by
`
`the Semiconductor Equipment and Materials International (“SEMI”) trade
`
`organization.
`
`6.
`
`From 1971-1974, I was a research metallurgist in the thin film development
`
`lab of Optical Coating Laboratory, Inc. In 1975 and 1976, I developed and
`
`demonstrated thin film applications and hardware for an in-line system at Airco
`
`Temescal. During my tenure (1977-1981) at Perkin Elmer, Plasma Products
`
`Division, I served in a number of capacities from Senior Staff Scientist, to
`
`Manager of the Advanced Development activity, to Manager of the Applications
`
`Laboratory. In 1981, I co-founded a semiconductor equipment company, Gryphon
`
`Products, and was VP of Engineering during development of the product. From
`
`1984-1988, I was the Advanced Development Manager for Gryphon, developing
`
`new hardware and process capabilities. During 1988-1990, I was Project Manager
`
`at General Signal Thinfilm on a project to develop and prototype an advanced
`
`cluster tool for making thin films. From 1991-2002, I was Manager of PVD
`
`
`
`
`
`
`2
`
`
`
`
`
`
`
`(physical vapor deposition) Source Engineering for Varian Associates, Thin Film
`
`Systems, and then for Novellus Systems, after they purchased TFS. Since then, I
`
`have been consulting full time doing business as UA Associates, where my
`
`consulting work includes product development projects, film failure analysis,
`
`project management, technical presentations and litigation support.
`
`7.
`
`Throughout my career, I have developed and/or demonstrated processes and
`
`equipment for making thin films, including Al, Ti-W, Ta, and Cu metallization of
`
`silicon wafers, RF sputtering and etching, and both RF and DC magnetron reactive
`
`sputtering, for example SiO2, Al2O3, ITO (Indium-Tin Oxide), TiN, and TaN. I
`
`have been in charge of the development of two sputter deposition systems from
`
`conception to prototype and release to manufacturing. I have also specialized in the
`
`development and improvement of magnetically enhanced sputter cathodes. I have
`
`experience with related technology areas, such as wafer heating, power supply
`
`evaluation, wafer cooling, ion beam sources, wafer handling by electrostatics,
`
`process pressure control, in-situ wafer/process monitoring, cryogenic pumping,
`
`getter pumping, sputter target development, and physical, electrical and optical
`
`properties of thin films.
`
`8.
`
`I am a member of a number of professional organizations including the
`
`American Vacuum Society, Sigma Xi (the Scientific Research Society), and as a
`
`
`
`
`
`
`3
`
`
`
`
`
`
`
`referee for the Journal of Vacuum Science & Technology. I have been a leader in
`
`the development of SEMI Standards for cluster tools and 300mm equipment,
`
`including holding various co-chair positions on various standards task forces. I
`
`have previously served as a member of the US Department of Commerce’s
`
`Semiconductor Technical Advisory Committee.
`
`9.
`
`I have co-authored many papers, reports, and presentations relating to
`
`semiconductor processing, equipment, and materials, including the following:
`
`a. P. S. McLeod and L. D. Hartsough, "High-Rate Sputtering of
`Aluminum for Metalization of Integrated Circuits", J. Vac. Sci.
`Technol., 14 263 (1977).
`
`b. D. R. Denison and L. D. Hartsough, "Copper Distribution in
`Sputtered Al/Cu Films", J. Vac. Sci. Technol., 17 1326 (1980).
`
`c. D. R. Denison and L. D. Hartsough, "Step Coverage in Multiple
`Pass Sputter Deposition" J. Vac. Sci. Technol., A3 686 (1985).
`
`d. G. C. D’Couto, G. Tkach, K. A. Ashtiani, L. Hartsough, E.
`Kim, R. Mulpuri, D. B. Lee, K. Levy, and M. Fissel; S. Choi,
`S.-M. Choi, H.-D. Lee, and H. –K. Kang, “In situ physical
`vapor deposition of ionized Ti and TiN thin films using hollow
`cathode magnetron plasma source” J. Vac. Sci. Technol. B
`19(1) 244 (2001).
`
`10. My areas of expertise include sputter deposition hardware and processes,
`
`
`
`
`
`
`4
`
`
`
`
`
`
`
`thin film deposition system design and thin film properties. I am a named inventor
`
`on twelve United States patents covering apparatus, methods or processes in the
`
`fields of thin film deposition and etching. A copy of my CV is attached as
`
`Attachment A.
`
`
`
`II. SUMMARY
`11. My opinions in this matter are set forth in detail below. Briefly, it is my
`
`opinion that:
`
`a. none of apparatus recited claims 1-11 and 33 of the ‘716 patent are
`
`anticipated by Wang;
`
`b. the apparatus recited in claims 12 and 13 would not have been
`
`obvious to a person of ordinary skill in the art at the time of the
`
`invention in view of the combined teachings of Wang and Lantsman;
`
`c. the methods recited in claims 14-18 and 21, and 25 and the apparatus
`
`recited in claims 26-32 would not have been obvious to a person of
`
`ordinary skill in the art at the time of the invention in view of the
`
`combined teachings of Wang and Kudryavtsev;
`
`d. the methods recited in claims 19 and 20 would not have been obvious
`
`
`
`
`
`
`5
`
`
`
`
`
`
`
`to a person of ordinary skill in the art at the time of the invention in
`
`view of the combined teachings of Wang, Kudryavtsev, and
`
`Lantsman; and
`
`e. the methods recited in claims 22-24 would not have been obvious to a
`
`person of ordinary skill in the art at the time of the invention in view
`
`of the combined teachings of Wang, Kudryavtsev, and Mozgrin.
`
`12. Wang discusses a magnetron sputter reactor in which DC power pulses are
`
`applied to a plasma in order to sputter material from a target. While Wang
`
`describes controlling aspects of these power pulses, Wang does not teach
`
`controlling voltage amplitude or pulse width when generating a high-density
`
`plasma to perform the sputtering. Nor does Wang explain any of the
`
`electrodynamics of the high-density plasma. As I explain below, control of a
`
`pulse’s power level (as in Wang) is very different from controlling the voltage
`
`amplitude and rise time of a pulse and even Wang acknowledges this distinction.1
`
`Any voltage pulses disclosed by Wang are merely a consequence of the system
`
`attempting to deliver the desired power level, i.e., the voltage (and current) are
`
`
`1 Ex. 1004 at 5:52-54 (“Where chamber impedance is changing, the power pulse
`
`width is preferably specified rather than the current or voltage pulse widths.”).
`
`
`
`
`
`
`6
`
`
`
`
`
`
`
`driven by the power supply of Wang based upon the desired power level but are
`
`determined by the plasma impedance.
`
`13. Kudryavtsev describes a flash tube, which is designed to apply a high
`
`voltage greater than the breakdown voltage across an inert gas resulting in a
`
`brilliant flash of light for a short duration. Flash tubes apply a voltage greater than
`
`the breakdown voltage, which may initiate the flash by an arc between the cathode
`
`and the anode. Kudryavtsev describes a voltage pulse that causes an “explosion” in
`
`electron density that appears to cause an arcing condition as shown in his measured
`
`voltage and current waveforms. A person of ordinary skill in the art would
`
`therefore not refer to Kudryavtsev at all when designing a plasma generator, where
`
`arcing is an undesirable characteristic.2
`
`14.
`
`In my opinion, it would not have been obvious to combine the teachings of
`
`Wang and Kudryavtsev. As I explain further below, there are significant
`
`differences between the experimental apparatus of Kudryavtsev and the magnetron
`
`sputter reactor described by Wang. Consequently, a person of ordinary skill in the
`
`art would not have expected that applying the teachings of Kudryavtsev in a Wang-
`
`type system would have yielded predictable results or would have performed in an
`
`expected way. Behaviors of charged particles (such as electrons and ions) in
`
`2 Ex. 1001 at 3:48-52.
`
`
`
`
`
`
`7
`
`
`
`
`
`
`
`magnetic fields (as in systems such as those discussed by Wang) are vastly
`
`different from their behaviors in the absence of magnetic fields (as in systems
`
`reported by Kudryavtsev).
`
`15. My conclusions regarding Wang and Kudryavtsev are not changed when one
`
`further considers the teachings of Mozgrin. While Mozgrin purports to have
`
`considered certain dependencies reported by Kudryavtsev, Mozgrin determined that
`
`for systems employing a magnetic field, a supply unit “providing square voltage
`
`and current pulses with rise times (leading edge) of 5 – 60 µs and durations as
`
`much as 1.5 ms” was needed.3 Wang, on the other hand, was concerned with
`
`systems that used magnetic filed but considered it important that pulses have
`
`“significant” rise times and pulse widths preferably less than 200 µs and no more
`
`than 1 ms.4 Given these important distinctions in the nature of the supply unit, the
`
`teachings of Mozgrin would be of little value to a person of ordinary skill in the art
`
`when considering the system of Wang. Significant experimentation would still be
`
`required in order to adapt any teachings of Mozgrin to the new regime of Wang.
`
`16.
`
`It is also my opinion it would not have been obvious to combine the
`
`teachings of Wang and Lantsman. Lantsman differs substantially from Wang.
`
`3 IPR2014-00808 Ex. 1303 at p. 401, rt. col. ¶ 1.
`
`4 Ex. 1004 at 5:26-27, 43-48; 8:41-42.
`
`
`
`
`
`
`8
`
`
`
`
`
`
`
`Whereas Wang describes the application of “narrow pulses of negative DC power
`
`supplied from a pulsed DC power supply,”5 Lantsman employs two separate power
`
`supplies: “[a] secondary power supply [that] pre-ignites the plasma by driving the
`
`cathode to a process initiation voltage[, and] a primary power supply [that
`
`thereafter] electrically drives the cathode to generate plasma current and deposition
`
`on a wafer.”6 Lantsman does not disclose a pulsed power supply, any type of
`
`electrical pulse, or a strongly-ionized plasma. Consequently, a skilled artisan
`
`would not have been motivated to modify Wang’s pulsed power magnetron
`
`sputtering system with a system that employs separate, continuous DC power
`
`supplies, such as that discussed by Lantsman.
`
`17. My opinions in this regard do not change when one considers the additional
`
`teachings of Kudryavtsev. As explained in detail below, because Kudryavtsev
`
`suggests forming an arc, a person of ordinary skill in the art would not have
`
`applied any of its teachings to a magnetron sputter reactor for which reducing
`
`arcing (as in Wang) was a consideration. Accordingly, it would not have been
`
`obvious to combine the teachings of Wang, Lantsman, and Kudryavtsev.
`
`
`
`
`5 Id. at 5:18-22.
`
`6 IPR2014-01100 Ex. 1105, Abstract.
`
`
`
`
`
`
`9
`
`
`
`
`
`
`
`III. LEGAL STANDARDS
`18.
`
`In this section I describe my understanding of certain legal standards. I have
`
`been informed of these legal standards by Zond’s attorneys. I am not an attorney
`
`and I am relying only on instructions from Zond’s attorneys for these legal
`
`standards.
`
`
`
`A. Level of Ordinary Skill in the Art.
`19.
`
`I understand that a person of ordinary skill in the art provides a reference
`
`point from which the prior art and claimed invention should be viewed. This
`
`reference point prevents one from using his or her own insight or hindsight in
`
`deciding whether a claim is obvious.
`
`20.
`
`In my opinion, given the disclosure of the ‘716 patent and the disclosure of
`
`the prior art references considered here, I consider a person of ordinary skill in the
`
`art at the time of filing of the ‘716 patent to be someone who holds at least a
`
`bachelor of science degree in physics, material science, or electrical/computer
`
`engineering with at least two years of work experience or equivalent in the field of
`
`development of plasma-based processing equipment. I met or exceeded the
`
`requirements for one of ordinary skill in the art at the time of the invention and
`
`continue to meet and/or exceed those requirements.
`
`
`
`
`
`
`10
`
`
`
`
`
`
`
`
`
`B. Claim Interpretation.
`21.
`
`I understand that the Board has construed the term “strongly ionized plasma”
`
`as “a plasma with a relatively high peak density of ions” and has construed the
`
`term “weakly ionized plasma” as “a plasma with a relatively low peak density of
`
`ions.” In rendering the opinions set forth herein I have applied these constructions.
`
`22.
`
`I further understand that the Board has construed the term “weakly-ionized
`
`plasma substantially eliminating the probability of developing an electrical
`
`breakdown condition in the chamber” as “weakly-ionized plasma that substantially
`
`eliminates the probability of developing an electrical breakdown condition when
`
`an electrical pulse is applied across the plasma thereby to generate a strongly-
`
`ionized plasma.” In rendering the opinions set forth herein I have applied this
`
`construction.
`
`23.
`
`I also understand that a means plus function claim limitation must be
`
`construed to cover the corresponding structure, material, or acts described in the
`
`specification and equivalents thereof. To that end, I understand the Board has
`
`adopted the following constructions of means plus function terms in the claims of
`
`the ‘716 patent.
`
`
`
`
`
`
`11
`
`
`
`
`
`
`
`Term
`“means for ionizing a feed gas in a
`chamber to form a weakly-ionized
`plasma that substantially eliminates the
`probability of developing an electrical
`breakdown condition in the chamber”
`“means for supplying an electrical pulse
`across the weakly-ionized plasma to
`transform the weakly-ionized plasma to
`a strongly-ionized plasma without
`developing an electrical breakdown
`condition in the chamber”
`
`Construction
`a power supply electrically connected to
`a cathode, an anode, and/or an electrode
`
`a pulsed power supply electrically
`connected to a cathode, an anode, and/or
`an electrode
`
`In rendering the opinions set forth herein I have applied the above constructions,
`
`with the exception of the Board’s construction for “means for ionizing a feed gas . .
`
`. .” In my opinion, the Board’s construction of this term is flawed inasmuch as it
`
`fails to account for the important cathode-anode arrangement that is described by
`
`Dr. Chistyakov. According to the ‘716 patent, “[t]he anode 216 is positioned so as
`
`to form a gap 220 between the anode 216 and the cathode 204 that is sufficient to
`
`allow current to flow through a region 222 between the anode 216 and the cathode
`
`204.”7 “The gap 220 and the total volume of the region 222 are parameters in the
`
`
`7 Ex. 1001 at 4:30-33.
`
`
`
`
`
`
`12
`
`
`
`
`
`
`
`ionization process . . . .”8 Because the gap (and the volume resulting therefrom)
`
`between the anode and cathode is specifically called out as being a parameter in
`
`the ionization process, in my opinion a person of ordinary skill in the art would
`
`consider the gap to be a part of the structure of the recited “means for ionization.”
`
`Therefore, in rendering the opinions set forth herein I have construed the “means
`
`for ionizing a feed gas in a chamber to form a weakly-ionized plasma that
`
`substantially eliminates the probability of developing an electrical breakdown
`
`condition in the chamber” as “a power supply electrically connected to a cathode
`
`separated from an anode, and/or an electrode, by a gap there between.”
`
`
`
`C. Legal Standards for Anticipation.
`24.
`
`I understand that a claim is anticipated if (i) each and every element and
`
`limitation of the claim at issue is found either expressly or inherently in a single
`
`prior art reference, and (ii) the elements and limitations are arranged in the prior art
`
`reference in the same way as recited in the claims at issue.
`
`
`
`
`8 Id. at 4:36-38.
`
`
`
`
`
`
`13
`
`
`
`
`
`
`
`D. Legal Standards for Obviousness.
`25.
`
`I understand that even if a patent is not anticipated, it may still be invalid if
`
`the differences between the claimed subject matter and the prior art are such that
`
`the subject matter as a whole would have been obvious at the time the invention
`
`was made to a person of ordinary skill in the pertinent art.
`
`26.
`
`I understand that obviousness must be analyzed from the perspective of a
`
`person of ordinary skill in the relevant art at the time the invention was made. In
`
`analyzing obviousness, I understand that it is important to understand the scope of
`
`the claims, the level of skill in the relevant art, the scope and content of the prior
`
`art, the differences between the prior art and the claims, and any secondary
`
`considerations of non-obviousness. I have not been asked to study or analyze any
`
`secondary considerations of non-obviousness. As discussed further below, the prior
`
`art references describe systems that are so different from what is claimed that these
`
`do not form a basis for an obviousness determination of the claimed subject matter.
`
`27.
`
`I also understand that a party seeking to invalidate a patent as obvious must
`
`demonstrate that a person of ordinary skill in the art would have been motivated to
`
`combine the teachings of the prior art references to achieve the claimed invention,
`
`that the person of ordinary skill in the art would have had a reasonable expectation
`
`of success in doing so, and that such determinations are evaluated as of the time
`
`the invention was made. I understand that this temporal requirement prevents the
`14
`
`
`
`
`
`
`
`
`
`
`
`
`forbidden use of hindsight. I also understand that rejections for obviousness cannot
`
`be sustained by mere conclusory statements and that Petitioners must show some
`
`reason why a person of ordinary skill in the art would have thought to combine
`
`particular available elements of knowledge, as evidenced by the prior art, to reach
`
`the claimed invention. I also understand that the motivation to combine inquiry
`
`focuses heavily on the scope and content of the prior art and the level of ordinary
`
`skill in the pertinent art.
`
`28.
`
`In arriving at the opinions set forth herein, I have considered questions of
`
`obviousness from the perspective of a person of ordinary skill in the relevant art at
`
`the time the invention was made and have given consideration to (1) the scope and
`
`content of the prior art; (2) the differences between the prior art and the asserted
`
`claims; and (3) the level of ordinary skill in the pertinent art. I have been informed
`
`and understand that the obviousness analysis requires a comparison of the properly
`
`construed claim language to the prior art on a limitation-by-limitation basis.
`
`
`
`IV. BACKGROUND TOPICS
`29. The ‘716 patent relates to “[m]ethods and apparatus for generating a
`
`
`
`
`
`
`15
`
`
`
`
`
`
`
`strongly-ionized plasma.”9 I understand that IPR2014-01099 was instituted to
`
`consider the novelty of claims 1-11 and 33 of the ‘716 patent over Wang, et al.,
`
`U.S. Patent 6,413,382 (Ex. 1004) (“Wang”). I also understand that IPR2014-01100
`
`was instituted to consider the obviousness of claims 12 and 13 in view of the
`
`combined teachings of Wang and Lantsman, U.S. Patent 6,190,512 (IPR2014-
`
`01100 Ex. 1105) (“Lantsman”). I further understand that IPR2014-00807 was
`
`instituted to consider the obviousness of claims 14-18 and 25-32 in view of the
`
`combined teachings of Wang and Kudryavtsev, et al, Ionization relaxation in a
`
`plasma produced by a pulsed inert-gas discharge, Sov. Phys. Tech. Phys. 28(1),
`
`January 1983 (IPR2014-00807 Ex. 1205) (“Kudryavtsev”). I also understand that
`
`IPR2014-00808 was instituted to consider the obviousness of claims 19 and 20 in
`
`view of the combined teachings of Wang, Kudryavtsev, and Lantsman; of claim 21
`
`in view of the combined teachings of Wang and Kudryavtsev; and of claims 22-24
`
`in view of the combined teachings of Wang, Kudryavtsev, and Mozgrin et al.,
`
`High-Current Low-Pressure Quasi- Stationary Discharge in a Magnetic Field:
`
`Experimental Research, Plasma Physics Reports, Vol. 21, No. 5, 1995 (Ex. 1003)
`
`(“Mozgrin”). In this section I provide some background information useful to
`
`understanding these cited references and the subject matter claimed in the ‘716
`
`
`9 Ex. 1001 at Abstract.
`
`
`
`
`
`
`16
`
`
`
`
`
`
`
`patent.
`
`
`
`A. Voltage, current, impedance and power.
`30. As is commonly known, when a voltage “V” is applied across an impedance
`
`“I,” an electric field is generated that forces a current I to flow through the
`
`impedance. For purely resistive impedance, the relation between the voltage and
`
`the resultant current is given by: V = I * R.
`
`31. A common analogy is that voltage is like a pressure that causes charged
`
`particles like electrons and ions to flow (i.e., current), and the amount of current
`
`depends on the magnitude of the pressure (voltage) and the amount of resistance or
`
`impedance that inhibits the flow. The ‘716 patent and the cited references
`
`considered here involve the flow of current through an assembly having a pair of
`
`electrodes with a plasma in the region between them. The effective impedance of
`
`such an assembly varies greatly with the density of charged particles in the region
`
`between the electrodes. Although such an impedance is more complex than the
`
`simple resistive impendence of the above equation, the general relation is similar: a
`
`voltage between the electrode assembly forces a current to flow through the
`
`plasma, such that the amount of current is determined by the amplitude of the
`
`voltage and the impedance of the plasma. Thus, the current through the electrode
`
`
`
`
`
`
`17
`
`
`
`
`
`
`
`assembly increases with the electrode voltage and, for a given electrode voltage,
`
`the current will increase with a drop in the impedance of the plasma.
`
`32. The impedance varies with the charge density of the plasma: With a high
`
`density of charged particle the impedance is relatively small, and with a low
`
`density of charged particles the impedance is relatively large. Simply, the more
`
`ions and electrons to carry the charge, the less resistance. However, the charges
`
`and fields react with each other in a very complicated manner.
`
`33.
`
`In response to the electric field in the region between the electrodes (i.e., the
`
`voltage across the electrodes), all charged particles in the region (the electrons and
`
`positive ions) feel a force that propels them to flow. This flow is an electric cur