`
`EXHIBIT P
`
`
`Instructions in “Cra-Z-Loom bracelet maker”
`
`
`
`17102/6+
`
`C I'd-2' [00 m bracelet maker
`
`
`
`Getting Started
`All you need to create cool jewelry is the
`Cra-2-Art LoomTM, Hook Bands and S-C—Iips.
`'The Cra-Z—LoomTM contains 43 numbered
`Pins to place bands onto. Directional
`arrows on the Loom uide you in
`PLACING and PICKI G theyBands. Add
`two Cra-Z-LoomsTM together to make a
`longer bracelet or belt.
`
`Latex-Free
`Rubber Bands
`
`' The Hook is used to PICK a Band off one
`Pin and LOOP it onto another Pin. To PICK
`a Band, the Hook will go into the
`“U“ Shaped Channel Of the Pln and grab
`the Band.
`
`° The Bands are colorful and fun. Enjoy
`mixing and matching colors to create your
`own jewelry.
`' S--CIips are used to connect your
`bracelet together.
`
`PLACE PATTERN
`
`PICK PATTERN
`
`The “PICK" Patterns and
`“PLACE” Patterns will help
`you make the 'ewyeir
`shown here. T e purple
`circles and white numbers
`represent the Pins on the
`Cra-Z—LoomTM. The colored
`numbers and arrows show
`the order and direction to
`PLACE and or PICK the
`Bands. Soon you will be
`creating your own
`
`patterns!
`
`
`
`START PLACING BANDS ON THIS END
`
`START PICKING BANDS ON THIS END
`
`
`
`
`
`
`
`Basic Instructions - It’s easy! PLACE, ROTATE, PICK & LOOP
`1. Following the PLACE Pattern (one-by—one, in order), start to PLACE Bands on the Cra-Z—LoomTM at the start end of the Cra-Z—LoomTM (figures 1-3).
`IMPORTANT: Place the Bands in the order of the pattern you’ve chosen.
`
`
`
`figure 1
`
`
`
`figure 2
`
`figure 3
`
`2. ROTATE the Cra-Z—LoomTM until the notched end is facing you (figure 4); you will start PICKING the Bands from the notched end.
`3. Use the Hook to PICK up a Band through the “U” shaped channel of the Pin (figure 5). LOOP the Band onto another Pin (figure 6).
`NOTE: It may help to use your fingers to hold down the other Bands while PICKING and LOOPING.
`
`
`
`figure 4
`
`Finishing It Off
`1. When you are ready to finish the bracelet, use a loose Band to make a slip knot around the Bands gathered on Pin 41 (figures 7—9).
`2. PULL the bracelet off the Cra-Z—LoomTM (figure 10).
`3. Add an S-Clip to connect the two ends of the bracelet (figure 11).
`4. You may need to tug and tidy up the loops of your bracelet.
`5. If the bracelet is too tight, add extra Bands to the bracelet before connecting with the S-Clip. if your bracelet is too loose, make your
`bracelet shorter by not placing Bands to the end of the Cra-Z—LoomTM. Stop on Pin 32 or 34 depending upon the size you need.
`
`
`
`figure 10
`
`\ ..
`
`figure 11
`
`figure 12
`
`
`
`Single Loop Rainbow
`
`PLACE
`1. Follow the PLACE Pattern and start by
`PLACING a white Band on Pins 2 & 3, then
`a white Band on Pins 3 & 5, then a white
`Band on pins 5 & 6, then on 6 & 8. PLACE
`a pink Band on pins 8 & 9. (figure 13).
`2. Repeat the PLACE pattern up the rest of
`the Cra-Z-LoomTM, using the rainbow
`colors.
`
`3. When you are finished PLACING the
`Bands, your Cra—Z—LoomTM should look like
`figure 14.
`
`figure 13
`
`
`figure 14
`
`figure 15a
`
`Single Loop Rainbow
`PLACE PATTERN
`
`0&9
`
`06°
`
`060
`
`Single Loop Rainbow
`“CK PATTERN
`REPEAT
`a
`
`
`
`
`
`
`
`ROTATE
`1. Start the PICK Pattern at the other end of
`the Cra-Z—LoomTM.
`PICK & LOOP
`1. PICK the purple Band on Pin 41 (figure 15)
`and LOOP it over onto Pin 39 (fi ure 15A).
`You are LOOPING over the Ban on Pins
`41 & 42.
`
`2. PICK the purple Band on Pin 39 (that is
`the same Band also on Pin 38) and LOOP
`into onto Pin 38 (figure 16). TIP: At first it
`can be tricky to pick up a Band under an
`already loo ed Band, but don’t
`ive up.
`Once you 0 it a few times, it wifi be easy!
`3. PICK the purple Band on Pin 38 and LOOP
`it onto Pin 36. (figure 16A).
`4. Repeat this zig zag pattern until you reach
`Pin 41 of the Cra—Z—LoomTM.
`5. The finished Cra-Z—LoomTM should look
`like figure 17. To finish the bracelet follow
`the “Finishing It Off” instructions.
`
`
`
`figure 17
`
`
`
`figure 16A
`
`
`
`Rainbow Bridge
`PLACE PATTERN
`
`REPEAT
`
`
`
`.1
`13 Rainbow mi
`
` figure 18
`
`You
`Will Need:
`24 Pink Bonds,
`2 Sets 013
`
`+
`
`1c
`
`Rainbow Bridge
`PLACE
`1. PLACE a pink Band on Pin 1 & 2, then a pink Band on Pin 2 & 3 (figure 18).
`2. PLACE a pink Band on Pin 1 & 4, then a pink Band on Pin 4 & 7. Continue this pattern of
`PLACING pink Bands up the left side of the Cra-Z-LoomTM until you reach Pin 34.
`3. Now you are going to PLACE the pink Bands aion the right side of the Cra-Z—LoomTM.
`PLACE a pink Band on Pin 3 & 6, then a pink Ban on 6 & 9. Continue this pattern up the
`right side of the Cra-Z—LoomTM until you reach Pin 36.
`4. To make the rainbow pattern in the center of the bracelet, follow the orange arrows and
`numbers in the PLACE Pattern. You will use two Bands for this section. When PLACING two
`Bands at once, be sure the Bands lay flat and do not twist onto each other.
`5. PLACE two dark pink Bands on pins 2 & 5 . PLACE two purple Bands on Pin 5 & 8.
`6. Repeat this pattern of PLACING two Bands up the middle row of the Cra-Z—LoomTM in a
`rainbow order (figure 21).
`7. Stop when you reach Pin 38. PLACE a single Band on Pin 38 and 41.
`The finished
`Cra-Z—LoomTM should look like figure 21.
`
`figure 20
`
`
`
`6. PICK the remaining pink Band on Pin 35 and
`LOOP it onto Pin 31
`
`7. Repeat these steps moving up the
`Cra-Z—LoomiM until you reach Pin 41.
`8. The finished Cra-Z—LoomTM should look like
`figure 28. To finish the bracelet follow the
`“Finishing It Off” instructions.
`
`Rainbow Bridge
`
`ROTATE
`1. ROTATE the Cra-Z-LoomTM.
`
`PICK & LOOP
`1. PICK the top white Band on Pin 38 (figure
`22) and LOOP it onto Pin 36 (figure 23).
`2. PICK the remaining white Band on Pin 38
`(figure 24) and LOOP it onto Pin 36
`(figure 25).
`. PICK the pink Band on Pin 36 and LOOP it
`onto Pin 33 (figure 26).
`PICK the pink Band on Pin 34 and LOOP it
`onto Pin 31 (figure 27).
`. PICK the top pink Band on Pin 35 and
`LOOP in onto Pin 33.
`
`01:50:
`
`PICK PATTERN
`
`figure 26
`
`figure 27
`
`figure 28
`
`
`
`Finishing
`
`You
`Will Need:
`13 Bands For
`the Background.
`3 Sets OF
`13 Rainbow Bonds.
`1 Band For
`
`Waterfall
`
`PLACE
`LEFT ROW
`
`1. PLACE one set of rainbow colored Bands following the pink arrows and numbers on the
`PLIACE Zattern. Start on the left row of the Cra-Z-LoomTM PLACING 13 Bands in rainbow
`co or or er.
`2. PLACE a red Band on Pin 1 & 4, then a red Band on Pin 4 & 7 (figure 29), then a pink Band on Pin
`7 &10.
`3. Repeat this PLACING pattern of rainbow colored Bands up the row stopping at Pin 40.
`MIDDLE ROW
`
`1. PLACE one set of rainbow colored Bands following the pink arrows and numbers on the
`Cra-Z—LoomTM Pattern. PLACE a red Band on Pin 2 & 5, then a red Band on Pin 5 & 8, then
`a pink Band on Pin 8 &11. Repeat this PLACING pattern of rainbow colored Bands up the
`row stopping at Pin 41.
`RIGHT ROW
`
`1. PLACE one set of rainbow colored Bands following the pink arrows and numbers on the
`PLACE Pattern. PLACE a red Band on Pin 3 & 6, then a red Band on Pin 6 & 9, then a pink
`Band on Pin 9 & 12. Repeat this PLACING pattern of rainbow colored Bands up the row
`stopping at Pin 42. When you are finished, your Cra-Z—LoomTM should look like figure 30.
`
`BACKGROUND BANDS
`
`‘
`
`,
`
`
`
`Now you will PLACE the white Bands following the blue arrows and numbers on the PLACE
`Pattern. These white Bands will create the background color.
`1. PLACE a white Band on Pins 4, 5, & 6 (figure 31).
`
`2. PLACE a white Band on Pins 7, 8, & 9. Repeat this pattern u
`the Cra-Z-LoomTM finishing on
`ould look like figure 32.
`
`Pins 40,41, 42. When you are finished, your Cra-Z—LoomTM sfi
`
`PLAlévgtlglllfTa'll'lERN
`
`
`
`
`
`
`ROTATE
`1. ROTATE the Cra-Z—LoomTM.
`
`Waterfall
`PICK PATTERN
`
`PICK & LOOP
`LEFT ROW
`
`2. You are ready to finish off your bracelet. To finish, follow the “Finishing It Off” instructions.
`
`
`REPEAT
`
`a
`
`@
`
`1. PICK the white Band on Pin 42 and LOOP it onto Pin 39 (figures 33-34). PICK white Band on
`Pin 39 and LOOP it onto Pin 36. PICK the pink Band on Pin 36 and LOOP it onto Pin 33. This
`
`completes one row. Now continue to the middle row.
`
`MIDDLE ROW
`
`1. PICK the white Band on Pin 41 and LOOP it onto Pin 38 (figure 35). PICK the white Band on
`Pin 38 and LOOP it onto Pin 35. PICK the pink Band on Pin 35 and LOOP it onto Pin 32. Now
`continue to the right row.
`RIGHT ROW
`
`1. PICK the white Band on Pin 40 and LOOP it onto Pin 37 (figure 36). PICK the white Band on
`Pin 37 and LOOP it onto Pin 34. PICK the pink Band on Pin 34 and LOOP it onto Pin 31. Your
`Cra-Z—LoomTM should look like figure 37.
`
`FINISH
`
`1. To prepare the bracelet for finishin , ROTATE the Cra-Z—LoomTM. PICK the red Band on Pin I
`(figure 38) and LOOP it onto Pin 2 ( igure 39). PICK the red Band on Pin 3 and LOOP it onto
`Pin 2 (figure 40).
`
`
`
`figure 33 . figure 38
`figure 39
`figure 40
`
`figure 35
`
`figure 36
`
`
`
`figure 37
`
`
`
`' Use different combinations of colored Bands
`and follow the PLACE and PICK Patterns to
`create your own unique jewelry!
`
`°
`
`It’s easy to add beads & charms (not
`included). Simply string a bead onto a
`finished bracelet or string a bead onto a
`Band before placing it on the Cra-Z-LoomTM.
`
`'
`
`'
`
`If your bracelet is too tight, add extra Bands
`to the bracelet before connecting with the
`8-0 ip.
`If your bracelet is too loose, make your
`bracelet shorter by not placing Bands to the
`end of the Cra-Z-LoomTM. Stop on Pin 32 or 34
`depending upon the size you need.
`
`° When your bracelet is finished, you may need
`to tug and tidy up the loops of your bracelet.
`
`° Make enough bracelets to share with your
`friends!
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`
`° Create colorful bracelets to accessorize any
`
`outfit!
`
`
`
`
`
`
`
`Eas .
`to A d
`Beads 8:
`
`Charms!
`
`
`(not. included)
`
`
`
`© 2012 Cra—Z-Art® All Rights Reserved. LaRose Industries, LLC, d/b/a Cra-Z-Art. Randolph, NJ 07869 USA Products and colors may vary from those shown.
`At Cra—Z—Art® we guarantee our quality. If you are not completely satisfied with our product, please call i-800-Cra-Z-Art or visit www.Cra-Z-Art.com.
`Made in China. PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE. Patent Pending.
`
`
`
`
`
Accessing this document will incur an additional charge of $.
After purchase, you can access this document again without charge.
Accept $ Charge
Still Working On It
This document is taking longer than usual to download. This can happen if we need to contact the court directly to obtain the document and their servers are running slowly.
Give it another minute or two to complete, and then try the refresh button.
A few More Minutes ... Still Working
It can take up to 5 minutes for us to download a document if the court servers are running slowly.
Thank you for your continued patience.
This document could not be displayed.
We could not find this document within its docket. Please go back to the docket page and check the link. If that does not work, go back to the docket and refresh it to pull the newest information.
Your account does not support viewing this document.
You need a Paid Account to view this document. Click here to change your account type.
Your account does not support viewing this document.
Set your membership
status to view this document.
With a Docket Alarm membership, you'll
get a whole lot more, including:
- Up-to-date information for this case.
- Email alerts whenever there is an update.
- Full text search for other cases.
- Get email alerts whenever a new case matches your search.
One Moment Please
The filing “” is large (MB) and is being downloaded.
Please refresh this page in a few minutes to see if the filing has been downloaded. The filing will also be emailed to you when the download completes.
Your document is on its way!
If you do not receive the document in five minutes, contact support at support@docketalarm.com.
Sealed Document
We are unable to display this document, it may be under a court ordered seal.
If you have proper credentials to access the file, you may proceed directly to the court's system using your government issued username and password.
Access Government Site
